mirror of
https://github.com/openwrt/openwrt.git
synced 2024-11-29 21:06:33 +08:00
ipq806x: add support for Netgear Nighthawk Pro Gaming XR500
This adds support for the Netgear Nighthawk Pro Gaming XR500. It is the successor to the Netgear Nighthawk R7800 and shares almost identical hardware to that device. The stock firmware is a heavily modified version of OpenWRT. Specifications: SoC: Qualcomm Atheros IPQ8065 RAM: 512 MB Storage: 256 MiB NAND Flash Wireless: 2x Qualcomm Atheros QCA9984 Ethernet: 2x 1000/100/10 dedicated interfaces Switch: 5x 1000/100/10 external ports USB: 2x 3.0 ports More information: Manufacturer page: https://www.netgear.com/gaming/xr500/ Almost identical to Netgear R7800 Differences (r7800 > xr500): Flash: 128MiB > 256MiB Removed esata swapped leds: usb1 (gpio 7 > 8) usb2 (gpio 8 > 26) guest/esata (gpio 26 > 7) MAC addresses: On the OEM firmware, the mac addresses are: WAN: *:50 art 0x6 LAN: *:4f art 0x0 (label) 2G: *:4f art 0x0 5G: *:51 art 0xc Installation: Install via Web Interface (preferred): Utilize openwrt-ipq806x-netgear_xr500-squashfs-factory.img Install via TFTP recovery: 1.Turn off the power, push and hold the reset button (in a hole on backside) with a pin 2.Turn on the power and wait till power led starts flashing white (after it first flashes orange for a while) 3.Release the reset button and tftp the factory img in binary mode. The power led will stop flashing if you succeeded in transferring the image, and the router reboots rather quickly with the new firmware. 4.Try to ping the router (ping 192.168.1.1). If does not respond, then tftp will not work either. Uploading the firmware image with a TFTP client $ tftp 192.168.1.1 bin put openwrt-ipq806x-netgear_xr500-squashfs-factory.img Note: The end of the last partition is at 0xee00000. This was chosen by the initial author, but nobody was able to tell why this particular arbitrary size was chosen. Since it's not leaving too much empty space and it's the only issue left, let's just keep it for now. Based on work by Adam Hnat <adamhnat@gmail.com> ref: https://github.com/openwrt/openwrt/pull/3215 Signed-off-by: Peter Geis <pgwipeout@gmail.com> [squash commits, move common LEDs to DTSI, remove SPDX on old files, minor whitespace cleanup, commit message facelift, add MAC address overview, add Notes, fix MAC addresses, use generic name for partition nodes in DTS] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Peter Geis
Adrian Schmutzler
parent
2c3e8bed3f
commit
70c12d26ca
@ -32,7 +32,8 @@ nec,wg2600hp3)
|
||||
netgear,d7800 |\
|
||||
netgear,r7500 |\
|
||||
netgear,r7500v2 |\
|
||||
netgear,r7800)
|
||||
netgear,r7800 |\
|
||||
netgear,xr500)
|
||||
ucidef_set_led_usbport "usb1" "USB 1" "white:usb1" "usb1-port1" "usb2-port1"
|
||||
ucidef_set_led_usbport "usb2" "USB 2" "white:usb2" "usb3-port1" "usb4-port1"
|
||||
ucidef_set_led_switch "wan" "WAN" "white:wan" "switch0" "0x20"
|
||||
|
||||
@ -57,6 +57,7 @@ nec,wg2600hp3)
|
||||
"2:lan" "3:lan" "4:lan" "5:lan" "0@eth1" "1:wan" "6@eth0"
|
||||
;;
|
||||
netgear,r7800 |\
|
||||
netgear,xr500 |\
|
||||
tplink,c2600)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0"
|
||||
|
||||
@ -48,6 +48,10 @@ case "$FIRMWARE" in
|
||||
caldata_extract "art" 0x1000 0x2f20
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x6) 1)
|
||||
;;
|
||||
netgear,xr500)
|
||||
caldata_extract "art" 0x1000 0x2f20
|
||||
ath10k_patch_mac $(mtd_get_mac_binary art 0xc)
|
||||
;;
|
||||
tplink,ad7200 |\
|
||||
tplink,c2600)
|
||||
caldata_extract "radio" 0x1000 0x2f20
|
||||
@ -102,6 +106,10 @@ case "$FIRMWARE" in
|
||||
caldata_extract "art" 0x5000 0x2f20
|
||||
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x6) 2)
|
||||
;;
|
||||
netgear,xr500)
|
||||
caldata_extract "art" 0x5000 0x2f20
|
||||
ath10k_patch_mac $(mtd_get_mac_binary art 0x0)
|
||||
;;
|
||||
tplink,ad7200 |\
|
||||
tplink,c2600)
|
||||
caldata_extract "radio" 0x5000 0x2f20
|
||||
|
||||
@ -16,6 +16,7 @@ platform_do_upgrade() {
|
||||
netgear,r7500 |\
|
||||
netgear,r7500v2 |\
|
||||
netgear,r7800 |\
|
||||
netgear,xr500 |\
|
||||
qcom,ipq8064-ap148 |\
|
||||
qcom,ipq8064-ap161)
|
||||
nand_do_upgrade "$1"
|
||||
|
||||
@ -0,0 +1,439 @@
|
||||
#include "qcom-ipq8065.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
memory@0 {
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
rsvd@5fe00000 {
|
||||
reg = <0x5fe00000 0x200000>;
|
||||
reusable;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
label-mac-device = &gmac2;
|
||||
|
||||
led-boot = &power_white;
|
||||
led-failsafe = &power_amber;
|
||||
led-running = &power_white;
|
||||
led-upgrade = &power_amber;
|
||||
|
||||
mdio-gpio0 = &mdio0;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds: leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
power_white: power_white {
|
||||
label = "white:power";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
power_amber: power_amber {
|
||||
label = "amber:power";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan_white {
|
||||
label = "white:wan";
|
||||
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan_amber {
|
||||
label = "amber:wan";
|
||||
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wifi {
|
||||
label = "white:wifi";
|
||||
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "white:wps";
|
||||
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio6", "gpio54", "gpio65";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio7", "gpio8", "gpio9",
|
||||
"gpio22", "gpio23", "gpio24",
|
||||
"gpio26", "gpio53", "gpio64";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
mdio0_pins: mdio0_pins {
|
||||
clk {
|
||||
pins = "gpio1";
|
||||
input-disable;
|
||||
};
|
||||
};
|
||||
|
||||
rgmii2_pins: rgmii2_pins {
|
||||
tx {
|
||||
pins = "gpio27", "gpio28", "gpio29",
|
||||
"gpio30", "gpio31", "gpio32";
|
||||
input-disable;
|
||||
};
|
||||
};
|
||||
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
function = "gsbi5";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
data {
|
||||
pins = "gpio18", "gpio19";
|
||||
drive-strength = <10>;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio20";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio21";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
};
|
||||
|
||||
spi6_pins: spi6_pins {
|
||||
mux {
|
||||
pins = "gpio55", "gpio56", "gpio58";
|
||||
function = "gsbi6";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
mosi {
|
||||
pins = "gpio55";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
|
||||
miso {
|
||||
pins = "gpio56";
|
||||
drive-strength = <14>;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio57";
|
||||
drive-strength = <12>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio58";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
|
||||
reset {
|
||||
pins = "gpio33";
|
||||
drive-strength = <10>;
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
usb0_pwr_en_pins: usb0_pwr_en_pins {
|
||||
mux {
|
||||
pins = "gpio15";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
usb1_pwr_en_pins: usb1_pwr_en_pins {
|
||||
mux {
|
||||
pins = "gpio16", "gpio68";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
nand-is-boot-medium;
|
||||
qcom,boot_pages_size = <0x1180000>;
|
||||
|
||||
partitions: partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "qcadata";
|
||||
reg = <0x0000000 0x0c80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@c80000 {
|
||||
label = "APPSBL";
|
||||
reg = <0x0c80000 0x0500000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1180000 {
|
||||
label = "APPSBLENV";
|
||||
reg = <0x1180000 0x0080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
art: partition@1200000 {
|
||||
label = "art";
|
||||
reg = <0x1200000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1340000 {
|
||||
label = "artbak";
|
||||
reg = <0x1340000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1480000 {
|
||||
label = "kernel";
|
||||
reg = <0x1480000 0x0400000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0xaa545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
|
||||
0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
|
||||
0x00978 0x19008643 /* QM_PORT1_CTRL0 */
|
||||
0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
|
||||
0x00980 0x19008643 /* QM_PORT2_CTRL0 */
|
||||
0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
|
||||
0x00988 0x19008643 /* QM_PORT3_CTRL0 */
|
||||
0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
|
||||
0x00990 0x19008643 /* QM_PORT4_CTRL0 */
|
||||
0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
|
||||
0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
|
||||
0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
|
||||
0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
|
||||
0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
|
||||
>;
|
||||
qca,ar8327-vlans = <
|
||||
0x1 0x5e /* VLAN1 Ports 1/2/3/4/6 */
|
||||
0x2 0x21 /* VLAN2 Ports 0/5 */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
qca,ar8327-initvals = <
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
qcom,phy_mdio_addr = <4>;
|
||||
qcom,poll_required = <0>;
|
||||
qcom,rgmii_delay = <1>;
|
||||
qcom,phy_mii_type = <0>;
|
||||
qcom,emulation = <0>;
|
||||
qcom,irq = <255>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nvmem-cells = <&macaddr_art_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
qcom,phy_mdio_addr = <0>; /* none */
|
||||
qcom,poll_required = <0>; /* no polling */
|
||||
qcom,rgmii_delay = <0>;
|
||||
qcom,phy_mii_type = <1>;
|
||||
qcom,emulation = <0>;
|
||||
qcom,irq = <258>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
nvmem-cells = <&macaddr_art_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&usb0_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&usb1_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi0: wifi@1,0 {
|
||||
compatible = "pci168c,0046";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
|
||||
max-link-speed = <1>;
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi1: wifi@1,0 {
|
||||
compatible = "pci168c,0046";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&art {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_art_0: macaddr@0 {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
|
||||
macaddr_art_6: macaddr@6 {
|
||||
reg = <0x6 0x6>;
|
||||
};
|
||||
};
|
||||
@ -1,470 +1,48 @@
|
||||
#include "qcom-ipq8065.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "qcom-ipq8065-nighthawk.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Netgear Nighthawk X4S R7800";
|
||||
compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
reg = <0x42000000 0x1e000000>;
|
||||
device_type = "memory";
|
||||
&leds {
|
||||
usb1 {
|
||||
label = "white:usb1";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
rsvd@5fe00000 {
|
||||
reg = <0x5fe00000 0x200000>;
|
||||
reusable;
|
||||
};
|
||||
usb2 {
|
||||
label = "white:usb2";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
aliases {
|
||||
mdio-gpio0 = &mdio0;
|
||||
|
||||
led-boot = &power_white;
|
||||
led-failsafe = &power_amber;
|
||||
led-running = &power_white;
|
||||
led-upgrade = &power_amber;
|
||||
label-mac-device = &gmac2;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
power_white: power_white {
|
||||
label = "white:power";
|
||||
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
power_amber: power_amber {
|
||||
label = "amber:power";
|
||||
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan_white {
|
||||
label = "white:wan";
|
||||
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan_amber {
|
||||
label = "amber:wan";
|
||||
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb1 {
|
||||
label = "white:usb1";
|
||||
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb2 {
|
||||
label = "white:usb2";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
esata {
|
||||
label = "white:esata";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wifi {
|
||||
label = "white:wifi";
|
||||
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "white:wps";
|
||||
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
esata {
|
||||
label = "white:esata";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&qcom_pinmux {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio6", "gpio54", "gpio65";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
&partitions {
|
||||
partition@1880000 {
|
||||
label = "ubi";
|
||||
reg = <0x1880000 0x6080000>;
|
||||
};
|
||||
|
||||
led_pins: led_pins {
|
||||
mux {
|
||||
pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
|
||||
"gpio24","gpio26", "gpio53", "gpio64";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
mdio0_pins: mdio0_pins {
|
||||
clk {
|
||||
pins = "gpio1";
|
||||
input-disable;
|
||||
};
|
||||
};
|
||||
|
||||
rgmii2_pins: rgmii2_pins {
|
||||
tx {
|
||||
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
|
||||
input-disable;
|
||||
};
|
||||
};
|
||||
|
||||
spi_pins: spi_pins {
|
||||
mux {
|
||||
pins = "gpio18", "gpio19", "gpio21";
|
||||
function = "gsbi5";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
data {
|
||||
pins = "gpio18", "gpio19";
|
||||
drive-strength = <10>;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio20";
|
||||
drive-strength = <10>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio21";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
};
|
||||
|
||||
spi6_pins: spi6_pins {
|
||||
mux {
|
||||
pins = "gpio55", "gpio56", "gpio58";
|
||||
function = "gsbi6";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
mosi {
|
||||
pins = "gpio55";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
|
||||
miso {
|
||||
pins = "gpio56";
|
||||
drive-strength = <14>;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio57";
|
||||
drive-strength = <12>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
clk {
|
||||
pins = "gpio58";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
|
||||
reset {
|
||||
pins = "gpio33";
|
||||
drive-strength = <10>;
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
usb0_pwr_en_pins: usb0_pwr_en_pins {
|
||||
mux {
|
||||
pins = "gpio15";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
usb1_pwr_en_pins: usb1_pwr_en_pins {
|
||||
mux {
|
||||
pins = "gpio16", "gpio68";
|
||||
function = "gpio";
|
||||
drive-strength = <12>;
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
partition@7900000 {
|
||||
label = "reserve";
|
||||
reg = <0x7900000 0x0700000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
compatible = "qcom,nandcs";
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
nand-is-boot-medium;
|
||||
qcom,boot_pages_size = <0x1180000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
qcadata@0 {
|
||||
label = "qcadata";
|
||||
reg = <0x0000000 0x0c80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBL@c80000 {
|
||||
label = "APPSBL";
|
||||
reg = <0x0c80000 0x0500000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
APPSBLENV@1180000 {
|
||||
label = "APPSBLENV";
|
||||
reg = <0x1180000 0x0080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
art: art@1200000 {
|
||||
label = "art";
|
||||
reg = <0x1200000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
artbak: art@1340000 {
|
||||
label = "artbak";
|
||||
reg = <0x1340000 0x0140000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
kernel@1480000 {
|
||||
label = "kernel";
|
||||
reg = <0x1480000 0x0400000>;
|
||||
};
|
||||
|
||||
ubi@1880000 {
|
||||
label = "ubi";
|
||||
reg = <0x1880000 0x6080000>;
|
||||
};
|
||||
|
||||
reserve@7900000 {
|
||||
label = "reserve";
|
||||
reg = <0x7900000 0x0700000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
qca,ar8327-initvals = <
|
||||
0x00004 0x7600000 /* PAD0_MODE */
|
||||
0x00008 0x1000000 /* PAD5_MODE */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
0x000e4 0xaa545 /* MAC_POWER_SEL */
|
||||
0x000e0 0xc74164de /* SGMII_CTRL */
|
||||
0x0007c 0x4e /* PORT0_STATUS */
|
||||
0x00094 0x4e /* PORT6_STATUS */
|
||||
0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
|
||||
0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
|
||||
0x00978 0x19008643 /* QM_PORT1_CTRL0 */
|
||||
0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
|
||||
0x00980 0x19008643 /* QM_PORT2_CTRL0 */
|
||||
0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
|
||||
0x00988 0x19008643 /* QM_PORT3_CTRL0 */
|
||||
0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
|
||||
0x00990 0x19008643 /* QM_PORT4_CTRL0 */
|
||||
0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
|
||||
0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
|
||||
0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
|
||||
0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
|
||||
0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
|
||||
>;
|
||||
qca,ar8327-vlans = <
|
||||
0x1 0x5e /* VLAN1 Ports 1/2/3/4/6 */
|
||||
0x2 0x21 /* VLAN2 Ports 0/5 */
|
||||
>;
|
||||
};
|
||||
|
||||
phy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
qca,ar8327-initvals = <
|
||||
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
||||
0x0000c 0x80 /* PAD6_MODE */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
qcom,id = <1>;
|
||||
qcom,phy_mdio_addr = <4>;
|
||||
qcom,poll_required = <0>;
|
||||
qcom,rgmii_delay = <1>;
|
||||
qcom,phy_mii_type = <0>;
|
||||
qcom,emulation = <0>;
|
||||
qcom,irq = <255>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
pinctrl-0 = <&rgmii2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
&wifi0 {
|
||||
nvmem-cells = <&macaddr_art_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
mac-address-increment = <(1)>;
|
||||
};
|
||||
|
||||
&gmac2 {
|
||||
status = "okay";
|
||||
phy-mode = "sgmii";
|
||||
qcom,id = <2>;
|
||||
qcom,phy_mdio_addr = <0>; /* none */
|
||||
qcom,poll_required = <0>; /* no polling */
|
||||
qcom,rgmii_delay = <0>;
|
||||
qcom,phy_mii_type = <1>;
|
||||
qcom,emulation = <0>;
|
||||
qcom,irq = <258>;
|
||||
mdiobus = <&mdio0>;
|
||||
|
||||
nvmem-cells = <&macaddr_art_0>;
|
||||
&wifi1 {
|
||||
nvmem-cells = <&macaddr_art_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&adm_dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&usb0_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb3_1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&usb1_pwr_en_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
compatible = "pci168c,0046";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
|
||||
nvmem-cells = <&macaddr_art_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <(1)>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
max-link-speed = <1>;
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi@1,0 {
|
||||
compatible = "pci168c,0046";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
|
||||
nvmem-cells = <&macaddr_art_6>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <(2)>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&art {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_art_0: macaddr@0 {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
|
||||
macaddr_art_6: macaddr@6 {
|
||||
reg = <0x6 0x6>;
|
||||
};
|
||||
mac-address-increment = <(2)>;
|
||||
};
|
||||
|
||||
@ -0,0 +1,54 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qcom-ipq8065-nighthawk.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Netgear Nighthawk XR500";
|
||||
compatible = "netgear,xr500", "qcom,ipq8065", "qcom,ipq8064";
|
||||
|
||||
};
|
||||
|
||||
&leds {
|
||||
usb1 {
|
||||
label = "white:usb1";
|
||||
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb2 {
|
||||
label = "white:usb2";
|
||||
gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&partitions {
|
||||
partition@1880000 {
|
||||
label = "ubi";
|
||||
reg = <0x1880000 0xce00000>;
|
||||
};
|
||||
|
||||
partition@e680000 {
|
||||
label = "reserve";
|
||||
reg = <0xe680000 0x0780000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
|
||||
&wifi0 {
|
||||
nvmem-cells = <&macaddr_art_c>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&wifi1 {
|
||||
nvmem-cells = <&macaddr_art_0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&art {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_art_c: macaddr@c {
|
||||
reg = <0xc 0x6>;
|
||||
};
|
||||
};
|
||||
@ -284,6 +284,20 @@ define Device/netgear_r7800
|
||||
endef
|
||||
TARGET_DEVICES += netgear_r7800
|
||||
|
||||
define Device/netgear_xr500
|
||||
$(call Device/DniImage)
|
||||
DEVICE_VENDOR := NETGEAR
|
||||
DEVICE_MODEL := Nighthawk XR500
|
||||
SOC := qcom-ipq8065
|
||||
KERNEL_SIZE := 4096k
|
||||
NETGEAR_BOARD_ID := XR500
|
||||
NETGEAR_HW_ID := 29764958+0+256+512+4x4+4x4+cascade
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
|
||||
endef
|
||||
TARGET_DEVICES += netgear_xr500
|
||||
|
||||
define Device/qcom_ipq8064-ap148
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
|
||||
@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
|
||||
|
||||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -907,8 +907,26 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
||||
@@ -907,8 +907,27 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
||||
qcom-ipq4019-ap.dk04.1-c3.dtb \
|
||||
qcom-ipq4019-ap.dk07.1-c1.dtb \
|
||||
qcom-ipq4019-ap.dk07.1-c2.dtb \
|
||||
@ -33,6 +33,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
|
||||
+ qcom-ipq8065-nbg6817.dtb \
|
||||
+ qcom-ipq8065-r7800.dtb \
|
||||
+ qcom-ipq8065-rt4230w-rev6.dtb \
|
||||
+ qcom-ipq8065-xr500.dtb \
|
||||
+ qcom-ipq8068-ecw5410.dtb \
|
||||
qcom-msm8660-surf.dtb \
|
||||
qcom-msm8960-cdp.dtb \
|
||||
|
||||
Loading…
Reference in New Issue
Block a user