mirror of
https://github.com/openwrt/openwrt.git
synced 2024-11-27 03:43:37 +08:00
ramips: Add support for TP-Link Archer MR200 v6
This adds a new port for the above device. Currently, there is no easy installation method except opening the device up and soldering a UART header on and getting u-boot shell access. You boot the initramfs version first using tftpboot, then once booted, you sysupgrade. Shell access to root on vendor firmware: admin:1234 To get U-Boot console, spam '4' into the serial console at boot. with LEDs on the left, serial pinout is: o - tx o - rx o - gnd x - 3v3 server ip for tftpboot 192.168.0.225 The initramfs-kernel version boots without touching onboard flash with: MT7628# tftpboot 0x80000000 openwrt-ramips-mt76x8-tplink_archer-mr200-v6-initramfs-kernel.bin MT7628# bootm 0x80000000 Then when it boots off RAM, you copy openwrt-ramips-mt76x8-tplink_archer-mr200-v6-squashfs-sysupgrade.bin to /tmp/sysupgrade.bin of the device and run: root@OpenWrt:/tmp# sysupgrade -n sysupgrade.bin - [x] LEDs working - [x] Buttons working - [x] wlan detected - [x] wwan detected - [x] initramfs image working - [x] sysupgrade working Signed-off-by: Damien Zammit <damien@zamaudio.com>
This commit is contained in:
Damien Zammit
parent
e29bc67f9d
commit
36ea4cc036
192
target/linux/ramips/dts/mt7628an_tplink_archer-mr200-v6.dts
Normal file
192
target/linux/ramips/dts/mt7628an_tplink_archer-mr200-v6.dts
Normal file
@ -0,0 +1,192 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7628an.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
compatible = "tplink,archer-mr200-v6", "mediatek,mt7628an-soc";
|
||||
model = "TP-Link Archer MR200 v6";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
label-mac-device = ðernet;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
lan {
|
||||
function = LED_FUNCTION_LAN;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan {
|
||||
function = LED_FUNCTION_WAN;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power: power {
|
||||
function = LED_FUNCTION_POWER;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
signal1 {
|
||||
label = "white:signal1";
|
||||
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
signal2 {
|
||||
label = "white:signal2";
|
||||
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
signal3 {
|
||||
label = "white:signal3";
|
||||
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan {
|
||||
function = LED_FUNCTION_WLAN;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
rfkill {
|
||||
label = "rfkill";
|
||||
gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
m25p,fast-read;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
firmware@20000 {
|
||||
compatible = "tplink,firmware";
|
||||
label = "firmware";
|
||||
reg = <0x20000 0xfa0000>;
|
||||
};
|
||||
|
||||
partition@fc0000 {
|
||||
label = "config";
|
||||
reg = <0xfc0000 0x10000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_config_f100: macaddr@f100 {
|
||||
compatible = "mac-base";
|
||||
reg = <0xf100 0x6>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@fd0000 {
|
||||
label = "romfile";
|
||||
reg = <0xfd0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@fe0000 {
|
||||
label = "radio";
|
||||
reg = <0xfe0000 0x10000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_radio_0: eeprom@0 {
|
||||
reg = <0x0 0x400>;
|
||||
};
|
||||
|
||||
eeprom_radio_8000: eeprom@8000 {
|
||||
reg = <0x8000 0x4da8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "i2c", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "uart1", "wdt";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&wmac {
|
||||
nvmem-cells = <&eeprom_radio_0>, <&macaddr_config_f100 0>;
|
||||
nvmem-cell-names = "eeprom", "mac-address";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&esw {
|
||||
mediatek,portdisable = <0x30>;
|
||||
};
|
||||
|
||||
ðernet {
|
||||
nvmem-cells = <&macaddr_config_f100 0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
nvmem-cells = <&eeprom_radio_8000>, <&macaddr_config_f100 (-1)>;
|
||||
nvmem-cell-names = "eeprom", "mac-address";
|
||||
};
|
||||
};
|
||||
@ -53,6 +53,18 @@ define Device/tplink-v1-okli
|
||||
append-metadata
|
||||
endef
|
||||
|
||||
define Device/tplink-v2-lzma-custom
|
||||
DEVICE_VENDOR := TP-Link
|
||||
TPLINK_FLASHLAYOUT :=
|
||||
TPLINK_HWID :=
|
||||
TPLINK_HWREV := 0x1
|
||||
TPLINK_HWREVADD := 0x0
|
||||
TPLINK_HVERSION := 3
|
||||
KERNEL := kernel-bin | append-dtb | lzma -d22
|
||||
KERNEL_INITRAMFS := kernel-bin | append-dtb
|
||||
IMAGE/sysupgrade.bin := tplink-v2-image -s -e | check-size | append-metadata
|
||||
endef
|
||||
|
||||
define Device/tplink-v2
|
||||
DEVICE_VENDOR := TP-Link
|
||||
TPLINK_FLASHLAYOUT :=
|
||||
|
||||
@ -652,6 +652,19 @@ define Device/tplink_archer-mr200-v5
|
||||
endef
|
||||
TARGET_DEVICES += tplink_archer-mr200-v5
|
||||
|
||||
define Device/tplink_archer-mr200-v6
|
||||
$(Device/tplink-v2-lzma-custom)
|
||||
IMAGE_SIZE := 15936k
|
||||
DEVICE_MODEL := Archer MR200
|
||||
DEVICE_VARIANT := v6
|
||||
TPLINK_FLASHLAYOUT := 16Mmtk
|
||||
TPLINK_HWID := 0x20000006
|
||||
TPLINK_HWREV := 0x6
|
||||
TPLINK_HWREVADD := 0x6
|
||||
DEVICE_PACKAGES := kmod-mt76x0e uqmi kmod-usb2 kmod-usb-serial-option
|
||||
endef
|
||||
TARGET_DEVICES += tplink_archer-mr200-v6
|
||||
|
||||
define Device/tplink_re200-v2
|
||||
$(Device/tplink-safeloader)
|
||||
IMAGE_SIZE := 7808k
|
||||
|
||||
@ -88,7 +88,8 @@ tplink,archer-c50-v6)
|
||||
ucidef_set_led_wlan "wlan2g" "wlan2g" "green:wlan2g" "phy0tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "wlan5g" "green:wlan5g" "phy1tpt"
|
||||
;;
|
||||
tplink,archer-mr200-v5)
|
||||
tplink,archer-mr200-v5|\
|
||||
tplink,archer-mr200-v6)
|
||||
ucidef_set_led_netdev "lan" "lan" "white:lan" "eth0"
|
||||
ucidef_set_led_netdev "wan" "wan" "white:wan" "wwan0"
|
||||
;;
|
||||
|
||||
@ -160,7 +160,8 @@ ramips_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
|
||||
;;
|
||||
tplink,archer-mr200-v5)
|
||||
tplink,archer-mr200-v5|\
|
||||
tplink,archer-mr200-v6)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0"
|
||||
ucidef_set_interface "wan" device "/dev/cdc-wdm0" protocol "qmi"
|
||||
|
||||
Loading…
Reference in New Issue
Block a user