now send a RESTART message to client.
This feature is intended to make UDP clients respond the same as TCP
clients in the case where the server issues a RESTART message in
order to force the client to reconnect and pull a new options/route
list.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5021 e7ae566f-a301-0410-adde-c780ea21d3b5
when an AUTH_FAILED message is returned to the client. This
string can be set by the server-side managment interface and read
by the client-side management interface.
For more info, see management/management-notes.txt, and look for
references to "client-reason-text".
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@5012 e7ae566f-a301-0410-adde-c780ea21d3b5
to clients, including routes. Previously, all pushed options needed
to fit within a 1024 byte options string.
Remember that to make use of this feature to allow many routes to
be pushed to clients, the client config file must specify the
max-routes option, and the number of pushed routes cannot exceed
this limit. Also, both server and client must include this commit.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4991 e7ae566f-a301-0410-adde-c780ea21d3b5
file or pulled from a server) can now be configured via the new
"max-routes" directive.
Previously, the limit was set to 100 and fixed by a compile-time
constant. Now the limit is dynamic and can be modified by the
"max-routes" directive. If max-routes is not specified, the default
limit is 100.
Note that this change does not address the maximum size of the
pushed options string sent from server to client, which is still
controlled by the TLS_CHANNEL_BUF_SIZE compile-time constant.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4967 e7ae566f-a301-0410-adde-c780ea21d3b5
after connection initiation rather than 0 seconds after.
Successive PUSH_REQUEST messages after the first will continue to be
sent at 5 second intervals until a response is received. This tends
to speed up the client connection sequence by 4 seconds because the
first PUSH_REQUEST message is usually sent too soon and is dropped,
causing a wait of 5 seconds until the next PUSH_REQUEST message is
sent.
Version 2.1_rc19d
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4965 e7ae566f-a301-0410-adde-c780ea21d3b5
use a DPC (deferred procedure call) to defer packet injection until
IRQL < DISPATCH_LEVEL, rather than calling NdisMEthIndicateReceive
in the context of AdapterTransmit. This is an attempt to reduce kernel
stack usage, and prevent EXCEPTION_DOUBLE_FAULT BSODs that have been
observed on Vista. Updated TAP driver version number to 9.6.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4606 e7ae566f-a301-0410-adde-c780ea21d3b5
client will examine the routing table and determine whether (a) the
OpenVPN server is reachable via a locally connected interface, or (b)
traffic to the server must be forwarded through the default router.
Only add a special bypass route for the OpenVPN server if (b) is true.
If (a) is true, behave as if the 'local' flag is specified, and do not
add a bypass route.
The new 'autolocal' flag depends on the non-portable test_local_addr()
function in route.c, which is currently only implemented for Windows.
The 'autolocal' flag will act as a no-op on platforms that have not
yet defined a test_local_addr() function.
Increased TLS_CHANNEL_BUF_SIZE to 2048 from 1024 (this will allow for
more option content to be pushed from server to client).
Raised D_MULTI_DROPPED debug level to 4 from 3.
Version 2.1_rc16b.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4446 e7ae566f-a301-0410-adde-c780ea21d3b5
to be pushed to the client in such a way that they don't accidently
obscure critical local addresses such as the DHCP server address and
DNS server addresses.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4436 e7ae566f-a301-0410-adde-c780ea21d3b5
Windows, where sending a set of several commands to the
management interface in quick succession might cause the
latter commands in the set to be ignored.
Increased management interface input command buffer size
from 256 to 1024 bytes.
Minor tweaks to Windows build system.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4414 e7ae566f-a301-0410-adde-c780ea21d3b5
and to use the Server 2008 WDK (6001.18002).
In cryptoapi.c, renamed CryptAcquireCertificatePrivateKey to
OpenVPNCryptAcquireCertificatePrivateKey to work around
a symbol conflict in MinGW-5.1.4.exe.
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@4318 e7ae566f-a301-0410-adde-c780ea21d3b5
Windows installer changes:
* ifdefed out the check Windows version code which is causing
problems on Windows 7
* don't define SF_SELECTED if it is already defined
git-svn-id: http://svn.openvpn.net/projects/openvpn/branches/BETA21/openvpn@3855 e7ae566f-a301-0410-adde-c780ea21d3b5
