mirrors/openssl
0
0
Fork 0
mirror of https://github.com/openssl/openssl.git synced 2024-12-22 16:33:51 +08:00
Code Issues Packages Projects Releases Wiki Activity
a0b3e0de6c
openssl/engines/makeengines.com
Richard Levitte cc8cc9a3a1 Functional VMS changes submitted by sms@antinode.info (Steven M. Schweda). 
Thank you\!
(note: not tested for now, a few nightly builds should give indications though)
2009-05-15 16:36:56 +00:00

949 lines
22 KiB
Plaintext
Raw Blame History

$!
$! MAKEENGINES.COM
$! Written By: Richard Levitte
$! richard@levitte.org
$!
$! This command file compiles and creates the various engines in form
$! of shared images. They are placed in [.xxx.EXE.ENGINES], where "xxx"
$! is ALPHA, IA64 or VAX, depending on your hardware.
$!
$! P1 if this is ENGINES or ALL, the engines will build, otherwise not.
$!
$! P2 DEBUG or NODEBUG to compile with or without debugger information.
$!
$! P3 VAXC for VAX C
$! DECC for DEC C
$! GNUC for GNU C (untested)
$!
$! P4 if defined, sets the TCP/IP libraries to use. UCX or TCPIP is
$! used by default since most other implementations come with a
$! compatibility library. The value must be one of the following:
$!
$! UCX for UCX
$! SOCKETSHR for SOCKETSHR+NETLIB
$! TCPIP for TCPIP (post UCX)
$!
$! P5 if defined, tells the compiler not to use special threads.
$!
$! P6 if defined, denotes which engines to build. If not defined,
$! all available engines are built.
$!
$!-----------------------------------------------------------------------------
$!
$! Set the names of the engines we want to build
$! NOTE: Some might think this list ugly. However, it's made this way to
$! reflect the LIBNAMES variable in Makefile as closely as possible,
$! thereby making it fairly easy to verify that the lists are the same.
$! NOTE: gmp isn't built, as it's mostly a test engine and brings in another
$! library that isn't necessarely ported to VMS.
$!
$ ENGINES = "," + P6
$ IF ENGINES .EQS. "," THEN -
ENGINES = ",4758cca,aep,atalla,cswift,chil,nuron,sureware,ubsec,padlock,ccgost"
$!
$! Set the default TCP/IP library to link against if needed
$!
$ TCPIP_LIB = ""
$!
$! Check What Architecture We Are Using.
$!
$ IF (F$GETSYI("CPU").LT.128)
$ THEN
$!
$! The Architecture Is VAX.
$!
$ ARCH := VAX
$!
$! Else...
$!
$ ELSE
$!
$! The Architecture Is Alpha, IA64 or whatever comes in the future.
$!
$ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
$ IF (ARCH .EQS. "") THEN ARCH = "UNK"
$!
$! End The Architecture Check.
$!
$ ENDIF
$!
$! Set the goal directories, and creat them if necessary
$!
$ OBJ_DIR := SYS$DISK:[-.'ARCH'.OBJ.ENGINES]
$ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.ENGINES]
$ IF F$PARSE(OBJ_DIR) .EQS. "" THEN CREATE/DIRECTORY 'OBJ_DIR'
$ IF F$PARSE(EXE_DIR) .EQS. "" THEN CREATE/DIRECTORY 'EXE_DIR'
$!
$! Set the goal files, and create them if necessary
$!
$ CRYPTO_LIB :=SYS$DISK:[-.'ARCH'.EXE.CRYPTO]LIBCRYPTO.OLB
$ IF F$SEARCH(CRYPTO_LIB) .EQS. "" THEN LIBRARY/CREATE/OBJECT 'CRYPTO_LIB'
$!
$! OK, time to check options and initialise
$!
$ OPT_PHASE = P1
$ ACCEPT_PHASE = "ALL,ENGINES"
$ OPT_DEBUG = P2
$ OPT_COMPILER = P3
$ OPT_TCPIP_LIB = P4
$ OPT_SPECIAL_THREADS = P5
$
$ GOSUB CHECK_OPTIONS
$ GOSUB INITIALISE
$ GOSUB CHECK_OPT_FILE
$!
$! Define what goes into each engine. VAX includes a transfer vector.
$!
$ ENGINE_ = ""
$ TV_OBJ = ""
$ IF ARCH .EQS. "VAX"
$ THEN
$ ENGINE_ = "engine_vector.mar"
$ TV_OBJ_NAME = OBJ_DIR + F$PARSE(ENGINE_,,,"NAME","SYNTAX_ONLY") + ".OBJ"
$ TV_OBJ = ",''TV_OBJ_NAME'"
$ ENDIF
$ ENGINE_4758CCA = "e_4758cca"
$ ENGINE_aep = "e_aep"
$ ENGINE_atalla = "e_atalla"
$ ENGINE_cswift = "e_cswift"
$ ENGINE_chil = "e_chil"
$ ENGINE_nuron = "e_nuron"
$ ENGINE_sureware = "e_sureware"
$ ENGINE_ubsec = "e_ubsec"
$ ENGINE_ubsec = "e_padlock"
$
$ ENGINE_ccgost_SUBDIR = "ccgost"
$ ENGINE_ccgost = "e_gost_err,gost2001_keyx,gost2001,gost89,gost94_keyx,"+ -
"gost_ameth,gost_asn1,gost_crypt,gost_ctl,gost_eng,"+ -
"gosthash,gost_keywrap,gost_md,gost_params,gost_pmeth,"+ -
"gost_sign"
$!
$! Define which programs need to be linked with a TCP/IP library
$!
$ TCPIP_ENGINES = ",,"
$ IF COMPILER .EQS. "VAXC" THEN -
TCPIP_ENGINES = ",,"
$!
$! Set up two loops, one that keeps track of the engines,
$! and one that keeps track of all the files going into
$! the current engine.
$!
$! Here's the start of the engine loop.
$!
$ ENGINE_COUNTER = 0
$ ENGINE_NEXT:
$!
$! Extract the current engine name, and if we've reached the end, stop
$!
$ ENGINE_NAME = F$ELEMENT(ENGINE_COUNTER,",",ENGINES)
$ IF (ENGINE_NAME.EQS.",") THEN GOTO ENGINE_DONE
$!
$ ENGINE_COUNTER = ENGINE_COUNTER + 1
$!
$! Set up the engine library names.
$!
$ LIB_ENGINE = "ENGINE_" + ENGINE_NAME
$!
$! Check if the library module name actually is defined
$!
$ IF F$TYPE('LIB_ENGINE') .EQS. ""
$ THEN
$ WRITE SYS$ERROR ""
$ WRITE SYS$ERROR "The module ",ENGINE_NAME," does not exist. Continuing..."
$ WRITE SYS$ERROR ""
$ GOTO ENGINE_NEXT
$ ENDIF
$!
$! Talk to the user
$!
$ IF ENGINE_NAME .NES. ""
$ THEN
$ WRITE SYS$OUTPUT "Compiling The ",ENGINE_NAME," Library Files. (",BUILDALL,")"
$ ELSE
$ WRITE SYS$OUTPUT "Compiling Support Files. (",BUILDALL,")"
$ ENDIF
$!
$! Create a .OPT file for the object files
$!
$ OPEN/WRITE OBJECTS 'EXE_DIR''ENGINE_NAME'.OPT
$!
$! Here's the start of per-engine module loop.
$!
$ FILE_COUNTER = 0
$ FILE_NEXT:
$!
$! Extract the file name from the file list, and if we've reached the end, stop
$!
$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",'LIB_ENGINE')
$ IF (FILE_NAME.EQS.",") THEN GOTO FILE_DONE
$!
$ FILE_COUNTER = FILE_COUNTER + 1
$!
$ IF FILE_NAME .EQS. "" THEN GOTO FILE_NEXT
$!
$! Set up the source and object reference
$!
$ IF F$TYPE('LIB_ENGINE'_SUBDIR) .EQS. ""
$ THEN
$ SOURCE_FILE = F$PARSE(FILE_NAME,"SYS$DISK:[].C",,,"SYNTAX_ONLY")
$ ELSE
$ SOURCE_FILE = F$PARSE(FILE_NAME,"SYS$DISK:[."+'LIB_ENGINE'_SUBDIR+"].C",,,"SYNTAX_ONLY")
$ ENDIF
$ OBJECT_FILE = OBJ_DIR + F$PARSE(FILE_NAME,,,"NAME","SYNTAX_ONLY") + ".OBJ"
$!
$! If we get some problem, we just go on trying to build the next module.
$ ON WARNING THEN GOTO FILE_NEXT
$!
$! Check if the module we want to compile is actually there.
$!
$ IF F$SEARCH(SOURCE_FILE) .EQS. ""
$ THEN
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Doesn't Exist."
$ WRITE SYS$OUTPUT ""
$ GOTO EXIT
$ ENDIF
$!
$! Talk to the user.
$!
$ WRITE SYS$OUTPUT " ",FILE_NAME,""
$!
$! Do the dirty work.
$!
$ ON ERROR THEN GOTO FILE_NEXT
$ IF FILE_NAME - ".MAR" .NES. FILE_NAME
$ THEN
$ MACRO/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
$ ELSE
$ CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
$ ENDIF
$ WRITE OBJECTS OBJECT_FILE
$!
$! Next file
$!
$ GOTO FILE_NEXT
$!
$ FILE_DONE:
$ CLOSE OBJECTS
$!
$! Do not link the support files.
$!
$ IF ENGINE_NAME .EQS. "" THEN GOTO ENGINE_NEXT
$!
$! Do not link the support files.
$!
$ IF ENGINE_NAME .EQS. "" THEN GOTO ENGINE_NEXT
$!
$! Now, there are two ways to handle this. We can either build
$! shareable images or stick the engine object file into libcrypto.
$! For now, the latter is NOT supported.
$!
$!!!!! LIBRARY/REPLACE 'CRYPTO_LIB' 'OBJECT_FILE'
$!
$! For shareable libraries, we need to do things a little differently
$! depending on if we link with a TCP/IP library or not.
$!
$ ENGINE_OPT := SYS$DISK:[]'ARCH'.OPT
$ IF TCPIP_LIB .NES. ""
$ THEN
$ LINK/'DEBUGGER'/'TRACEBACK' /SHARE='EXE_DIR''ENGINE_NAME'.EXE -
'EXE_DIR''ENGINE_NAME'.OPT/OPTION'TV_OBJ', -
'CRYPTO_LIB'/LIBRARY, -
'ENGINE_OPT'/OPTION,'TCPIP_LIB','OPT_FILE'/OPTION
$ ELSE
$ LINK/'DEBUGGER'/'TRACEBACK' /SHARE='EXE_DIR''ENGINE_NAME'.EXE -
'EXE_DIR''ENGINE_NAME'.OPT/OPTION'TV_OBJ', -
'CRYPTO_LIB'/LIBRARY, -
'ENGINE_OPT'/OPTION,'OPT_FILE'/OPTION
$ ENDIF
$!
$! Next engine
$!
$ GOTO ENGINE_NEXT
$!
$ ENGINE_DONE:
$!
$! Talk to the user
$!
$ WRITE SYS$OUTPUT "All Done..."
$ EXIT:
$ GOSUB CLEANUP
$ EXIT
$!
$! Check For The Link Option FIle.
$!
$ CHECK_OPT_FILE:
$!
$! Check To See If We Need To Make A VAX C Option File.
$!
$ IF (COMPILER.EQS."VAXC")
$ THEN
$!
$! Check To See If We Already Have A VAX C Linker Option File.
$!
$ IF (F$SEARCH(OPT_FILE).EQS."")
$ THEN
$!
$! We Need A VAX C Linker Option File.
$!
$ CREATE 'OPT_FILE'
$DECK
!
! Default System Options File To Link Agianst
! The Sharable VAX C Runtime Library.
!
SYS$SHARE:VAXCRTL.EXE/SHARE
$EOD
$!
$! End The Option File Check.
$!
$ ENDIF
$!
$! End The VAXC Check.
$!
$ ENDIF
$!
$! Check To See If We Need A GNU C Option File.
$!
$ IF (COMPILER.EQS."GNUC")
$ THEN
$!
$! Check To See If We Already Have A GNU C Linker Option File.
$!
$ IF (F$SEARCH(OPT_FILE).EQS."")
$ THEN
$!
$! We Need A GNU C Linker Option File.
$!
$ CREATE 'OPT_FILE'
$DECK
!
! Default System Options File To Link Agianst
! The Sharable C Runtime Library.
!
GNU_CC:[000000]GCCLIB/LIBRARY
SYS$SHARE:VAXCRTL/SHARE
$EOD
$!
$! End The Option File Check.
$!
$ ENDIF
$!
$! End The GNU C Check.
$!
$ ENDIF
$!
$! Check To See If We Need A DEC C Option File.
$!
$ IF (COMPILER.EQS."DECC")
$ THEN
$!
$! Check To See If We Already Have A DEC C Linker Option File.
$!
$ IF (F$SEARCH(OPT_FILE).EQS."")
$ THEN
$!
$! Figure Out If We Need A non-VAX Or A VAX Linker Option File.
$!
$ IF ARCH .EQS. "VAX"
$ THEN
$!
$! We Need A DEC C Linker Option File For VAX.
$!
$ CREATE 'OPT_FILE'
$DECK
!
! Default System Options File To Link Agianst
! The Sharable DEC C Runtime Library.
!
SYS$SHARE:DECC$SHR.EXE/SHARE
$EOD
$!
$! Else...
$!
$ ELSE
$!
$! Create The non-VAX Linker Option File.
$!
$ CREATE 'OPT_FILE'
$DECK
!
! Default System Options File For non-VAX To Link Agianst
! The Sharable C Runtime Library.
!
SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE
SYS$SHARE:CMA$OPEN_RTL/SHARE
$EOD
$!
$! End The DEC C Option File Check.
$!
$ ENDIF
$!
$! End The Option File Search.
$!
$ ENDIF
$!
$! End The DEC C Check.
$!
$ ENDIF
$!
$! Tell The User What Linker Option File We Are Using.
$!
$ WRITE SYS$OUTPUT "Using Linker Option File ",OPT_FILE,"."
$!
$! Time To RETURN.
$!
$ RETURN
$!
$! Check The User's Options.
$!
$ CHECK_OPTIONS:
$!
$! Check To See If OPT_PHASE Is Blank.
$!
$ IF (OPT_PHASE.EQS."ALL")
$ THEN
$!
$! OPT_PHASE Is Blank, So Build Everything.
$!
$ BUILDALL = "ALL"
$!
$! Else...
$!
$ ELSE
$!
$! Else, Check To See If OPT_PHASE Has A Valid Arguement.
$!
$ IF ("," + ACCEPT_PHASE + ",") - ("," + OPT_PHASE + ",") -
.NES. ("," + ACCEPT_PHASE + ",")
$ THEN
$!
$! A Valid Arguement.
$!
$ BUILDALL = OPT_PHASE
$!
$! Else...
$!
$ ELSE
$!
$! Tell The User We Don't Know What They Want.
$!
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT "The option ",OPT_PHASE," is invalid. The valid options are:"
$ WRITE SYS$OUTPUT ""
$ IF ("," + ACCEPT_PHASE + ",") - ",ALL," -
.NES. ("," + ACCEPT_PHASE + ",") THEN -
WRITE SYS$OUTPUT " ALL : just build everything."
$ IF ("," + ACCEPT_PHASE + ",") - ",ENGINES," -
.NES. ("," + ACCEPT_PHASE + ",") THEN -
WRITE SYS$OUTPUT " ENGINES : to compile just the [.xxx.EXE.ENGINES]*.EXE hareable images."
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT " where 'xxx' stands for:"
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT " ALPHA : Alpha architecture."
$ WRITE SYS$OUTPUT " IA64 : IA64 architecture."
$ WRITE SYS$OUTPUT " VAX : VAX architecture."
$ WRITE SYS$OUTPUT ""
$!
$! Time To EXIT.
$!
$ EXIT
$!
$! End The Valid Arguement Check.
$!
$ ENDIF
$!
$! End The OPT_PHASE Check.
$!
$ ENDIF
$!
$! Check To See If OPT_DEBUG Is Blank.
$!
$ IF (OPT_DEBUG.EQS."NODEBUG")
$ THEN
$!
$! OPT_DEBUG Is NODEBUG, So Compile Without The Debugger Information.
$!
$ DEBUGGER = "NODEBUG"
$ TRACEBACK = "NOTRACEBACK"
$ GCC_OPTIMIZE = "OPTIMIZE"
$ CC_OPTIMIZE = "OPTIMIZE"
$ MACRO_OPTIMIZE = "OPTIMIZE"
$ WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."
$ WRITE SYS$OUTPUT "Compiling With Compiler Optimization."
$ ELSE
$!
$! Check To See If We Are To Compile With Debugger Information.
$!
$ IF (OPT_DEBUG.EQS."DEBUG")
$ THEN
$!
$! Compile With Debugger Information.
$!
$ DEBUGGER = "DEBUG"
$ TRACEBACK = "TRACEBACK"
$ GCC_OPTIMIZE = "NOOPTIMIZE"
$ CC_OPTIMIZE = "NOOPTIMIZE"
$ MACRO_OPTIMIZE = "NOOPTIMIZE"
$ WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile."
$ WRITE SYS$OUTPUT "Compiling Without Compiler Optimization."
$ ELSE
$!
$! They Entered An Invalid Option..
$!
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT "The Option ",OPT_DEBUG," Is Invalid. The Valid Options Are:"
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information."
$ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information."
$ WRITE SYS$OUTPUT ""
$!
$! Time To EXIT.
$!
$ EXIT
$!
$! End The Valid Arguement Check.
$!
$ ENDIF
$!
$! End The OPT_DEBUG Check.
$!
$ ENDIF
$!
$! Special Threads For OpenVMS v7.1 Or Later
$!
$! Written By: Richard Levitte
$! richard@levitte.org
$!
$!
$! Check To See If We Have A Option For OPT_SPECIAL_THREADS.
$!
$ IF (OPT_SPECIAL_THREADS.EQS."")
$ THEN
$!
$! Get The Version Of VMS We Are Using.
$!
$ ISSEVEN :=
$ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,F$GETSYI("VERSION")))
$ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP))
$!
$! Check To See If The VMS Version Is v7.1 Or Later.
$!
$ IF (TMP.GE.71)
$ THEN
$!
$! We Have OpenVMS v7.1 Or Later, So Use The Special Threads.
$!
$ ISSEVEN := ,PTHREAD_USE_D4
$!
$! End The VMS Version Check.
$!
$ ENDIF
$!
$! End The OPT_SPECIAL_THREADS Check.
$!
$ ENDIF
$!
$! Check To See If OPT_COMPILER Is Blank.
$!
$ IF (OPT_COMPILER.EQS."")
$ THEN
$!
$! O.K., The User Didn't Specify A Compiler, Let's Try To
$! Find Out Which One To Use.
$!
$! Check To See If We Have GNU C.
$!
$ IF (F$TRNLNM("GNU_CC").NES."")
$ THEN
$!
$! Looks Like GNUC, Set To Use GNUC.
$!
$ OPT_COMPILER = "GNUC"
$!
$! Else...
$!
$ ELSE
$!
$! Check To See If We Have VAXC Or DECC.
$!
$ IF (ARCH.NES."VAX").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."")
$ THEN
$!
$! Looks Like DECC, Set To Use DECC.
$!
$ OPT_COMPILER = "DECC"
$!
$! Else...
$!
$ ELSE
$!
$! Looks Like VAXC, Set To Use VAXC.
$!
$ OPT_COMPILER = "VAXC"
$!
$! End The VAXC Compiler Check.
$!
$ ENDIF
$!
$! End The DECC & VAXC Compiler Check.
$!
$ ENDIF
$!
$! End The Compiler Check.
$!
$ ENDIF
$!
$! Check To See If We Have A Option For OPT_TCPIP_LIB.
$!
$ IF (OPT_TCPIP_LIB.EQS."")
$ THEN
$!
$! Find out what socket library we have available
$!
$ IF F$PARSE("SOCKETSHR:") .NES. ""
$ THEN
$!
$! We have SOCKETSHR, and it is my opinion that it's the best to use.
$!
$ OPT_TCPIP_LIB = "SOCKETSHR"
$!
$! Tell the user
$!
$ WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP"
$!
$! Else, let's look for something else
$!
$ ELSE
$!
$! Like UCX (the reason to do this before Multinet is that the UCX
$! emulation is easier to use...)
$!
$ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" -
.OR. F$PARSE("SYS$SHARE:UCX$IPC_SHR.EXE") .NES. "" -
.OR. F$PARSE("SYS$LIBRARY:UCX$IPC.OLB") .NES. ""
$ THEN
$!
$! Last resort: a UCX or UCX-compatible library
$!
$ OPT_TCPIP_LIB = "UCX"
$!
$! Tell the user
$!
$ WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP"
$!
$! That was all...
$!
$ ENDIF
$ ENDIF
$ ENDIF
$!
$! Set Up Initial CC Definitions, Possibly With User Ones
$!
$ CCDEFS = "TCPIP_TYPE_''OPT_TCPIP_LIB',DSO_VMS"
$ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS
$ CCEXTRAFLAGS = ""
$ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX"
$ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS
$!
$! Check To See If The User Entered A Valid Paramter.
$!
$ IF (OPT_COMPILER.EQS."VAXC").OR.(OPT_COMPILER.EQS."DECC").OR.(OPT_COMPILER.EQS."GNUC")
$ THEN
$!
$! Check To See If The User Wanted DECC.
$!
$ IF (OPT_COMPILER.EQS."DECC")
$ THEN
$!
$! Looks Like DECC, Set To Use DECC.
$!
$ COMPILER = "DECC"
$!
$! Tell The User We Are Using DECC.
$!
$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler."
$!
$! Use DECC...
$!
$ CC = "CC"
$ IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
THEN CC = "CC/DECC"
$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89" + -
"/NOLIST/PREFIX=ALL" + -
"/INCLUDE=(SYS$DISK:[],SYS$DISK:[.VENDOR_DEFNS])" + -
CCEXTRAFLAGS
$!
$! Define The Linker Options File Name.
$!
$ OPT_FILE = "''EXE_DIR'VAX_DECC_OPTIONS.OPT"
$!
$! End DECC Check.
$!
$ ENDIF
$!
$! Check To See If We Are To Use VAXC.
$!
$ IF (OPT_COMPILER.EQS."VAXC")
$ THEN
$!
$! Looks Like VAXC, Set To Use VAXC.
$!
$ COMPILER = "VAXC"
$!
$! Tell The User We Are Using VAX C.
$!
$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."
$!
$! Compile Using VAXC.
$!
$ CC = "CC"
$ IF ARCH.NES."VAX"
$ THEN
$ WRITE SYS$OUTPUT "There is no VAX C on Alpha!"
$ EXIT
$ ENDIF
$ IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
"/INCLUDE=(SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.ENGINE.VENDOR_DEFNS])" + -
CCEXTRAFLAGS
$ CCDEFS = """VAXC""," + CCDEFS
$!
$! Define <sys> As SYS$COMMON:[SYSLIB]
$!
$ DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB]
$!
$! Define The Linker Options File Name.
$!
$ OPT_FILE = "''EXE_DIR'VAX_VAXC_OPTIONS.OPT"
$!
$! End VAXC Check
$!
$ ENDIF
$!
$! Check To See If We Are To Use GNU C.
$!
$ IF (OPT_COMPILER.EQS."GNUC")
$ THEN
$!
$! Looks Like GNUC, Set To Use GNUC.
$!
$ COMPILER = "GNUC"
$!
$! Tell The User We Are Using GNUC.
$!
$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler."
$!
$! Use GNU C...
$!
$ CC = "GCC/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
"/INCLUDE=(SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.ENGINE.VENDOR_DEFNS])" + -
CCEXTRAFLAGS
$!
$! Define The Linker Options File Name.
$!
$ OPT_FILE = "''EXE_DIR'VAX_GNUC_OPTIONS.OPT"
$!
$! End The GNU C Check.
$!
$ ENDIF
$!
$! Set up default defines
$!
$ CCDEFS = """FLAT_INC=1""," + CCDEFS
$!
$! Finish up the definition of CC.
$!
$ IF COMPILER .EQS. "DECC"
$ THEN
$ IF CCDISABLEWARNINGS .NES. ""
$ THEN
$ CCDISABLEWARNINGS = "/WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
$ ENDIF
$ ELSE
$ CCDISABLEWARNINGS = ""
$ ENDIF
$ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
$!
$! Show user the result
$!
$ WRITE/SYMBOL SYS$OUTPUT "Main C Compiling Command: ",CC
$!
$! Else The User Entered An Invalid Arguement.
$!
$ ELSE
$!
$! Tell The User We Don't Know What They Want.
$!
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT "The Option ",OPT_COMPILER," Is Invalid. The Valid Options Are:"
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C."
$ WRITE SYS$OUTPUT " DECC : To Compile With DEC C."
$ WRITE SYS$OUTPUT " GNUC : To Compile With GNU C."
$ WRITE SYS$OUTPUT ""
$!
$! Time To EXIT.
$!
$ EXIT
$!
$! End The Valid Arguement Check.
$!
$ ENDIF
$!
$! Build a MACRO command for the architecture at hand
$!
$ IF ARCH .EQS. "VAX" THEN MACRO = "MACRO/''DEBUGGER'"
$ IF ARCH .NES. "VAX" THEN MACRO = "MACRO/MIGRATION/''DEBUGGER'/''MACRO_OPTIMIZE'"
$!
$! Show user the result
$!
$ WRITE/SYMBOL SYS$OUTPUT "Main MACRO Compiling Command: ",MACRO
$!
$! Time to check the contents, and to make sure we get the correct library.
$!
$ IF OPT_TCPIP_LIB.EQS."SOCKETSHR" .OR. OPT_TCPIP_LIB.EQS."MULTINET" -
.OR. OPT_TCPIP_LIB.EQS."UCX" .OR. OPT_TCPIP_LIB.EQS."TCPIP" -
.OR. OPT_TCPIP_LIB.EQS."NONE"
$ THEN
$!
$! Check to see if SOCKETSHR was chosen
$!
$ IF OPT_TCPIP_LIB.EQS."SOCKETSHR"
$ THEN
$!
$! Set the library to use SOCKETSHR
$!
$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
$!
$! Done with SOCKETSHR
$!
$ ENDIF
$!
$! Check to see if MULTINET was chosen
$!
$ IF OPT_TCPIP_LIB.EQS."MULTINET"
$ THEN
$!
$! Set the library to use UCX emulation.
$!
$ OPT_TCPIP_LIB = "UCX"
$!
$! Done with MULTINET
$!
$ ENDIF
$!
$! Check to see if UCX was chosen
$!
$ IF OPT_TCPIP_LIB.EQS."UCX"
$ THEN
$!
$! Set the library to use UCX.
$!
$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
$ IF F$TRNLNM("UCX$IPC_SHR") .NES. ""
$ THEN
$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT"
$ ELSE
$ IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN -
TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT/OPT"
$ ENDIF
$!
$! Done with UCX
$!
$ ENDIF
$!
$! Check to see if TCPIP was chosen
$!
$ IF OPT_TCPIP_LIB.EQS."TCPIP"
$ THEN
$!
$! Set the library to use TCPIP (post UCX).
$!
$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
$!
$! Done with TCPIP
$!
$ ENDIF
$!
$! Check to see if NONE was chosen
$!
$ IF OPT_TCPIP_LIB.EQS."NONE"
$ THEN
$!
$! Do not use a TCPIP library.
$!
$ TCPIP_LIB = ""
$!
$! Done with TCPIP
$!
$ ENDIF
$!
$! Print info
$!
$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB
$!
$! Else The User Entered An Invalid Arguement.
$!
$ ELSE
$!
$! Tell The User We Don't Know What They Want.
$!
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT "The Option ",OPT_TCPIP_LIB," Is Invalid. The Valid Options Are:"
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library."
$ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library."
$ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP (post UCX) TCP/IP library."
$ WRITE SYS$OUTPUT ""
$!
$! Time To EXIT.
$!
$ EXIT
$!
$! Done with TCP/IP libraries
$!
$ ENDIF
$!
$! Time To RETURN...
$!
$ RETURN
$!
$ INITIALISE:
$!
$! Save old value of the logical name OPENSSL
$!
$ __SAVE_OPENSSL = F$TRNLNM("OPENSSL","LNM$PROCESS_TABLE")
$!
$! Save directory information
$!
$ __HERE = F$PARSE(F$PARSE("A.;",F$ENVIRONMENT("PROCEDURE"))-"A.;","[]A.;") - "A.;"
$ __HERE = F$EDIT(__HERE,"UPCASE")
$ __TOP = __HERE - "ENGINES]"
$ __INCLUDE = __TOP + "INCLUDE.OPENSSL]"
$!
$! Set up the logical name OPENSSL to point at the include directory
$!
$ DEFINE OPENSSL/NOLOG '__INCLUDE'
$!
$! Done
$!
$ RETURN
$!
$ CLEANUP:
$!
$! Restore the logical name OPENSSL if it had a value
$!
$ IF __SAVE_OPENSSL .EQS. ""
$ THEN
$ DEASSIGN OPENSSL
$ ELSE
$ DEFINE/NOLOG OPENSSL '__SAVE_OPENSSL'
$ ENDIF
$!
$! Done
$!
$ RETURN
Reference in New Issue View Git Blame Copy Permalink