Run util/openssl-format-source on ssl/
Some comments and hand-formatted tables were fixed up
manually by disabling auto-formatting.
Reviewed-by: Rich Salz <rsalz@openssl.org>
When handling ECDH check to see if the curve is "custom" (X25519 is
currently the only curve of this type) and instead of setting a curve
NID just allocate a key of appropriate type.
Reviewed-by: Rich Salz <rsalz@openssl.org>
- Always process ALPN (previously there was an early return in the
certificate status handling)
- Don't send a duplicate alert. Previously, both
ssl_check_clienthello_tlsext_late and its caller would send an
alert. Consolidate alert sending code in the caller.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1264)
When session tickets are used, it's possible that SNI might swtich the
SSL_CTX on an SSL. Normally, this is not a problem, because the
initial_ctx/session_ctx are used for all session ticket/id processes.
However, when the SNI callback occurs, it's possible that the callback
may update the options in the SSL from the SSL_CTX, and this could
cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things
can happen:
1. The session ticket TLSEXT may not be written when the ticket expected
flag is set. The state machine transistions to writing the ticket, and
the client responds with an error as its not expecting a ticket.
2. When creating the session ticket, if the ticket key cb returns 0
the crypto/hmac contexts are not initialized, and the code crashes when
trying to encrypt the session ticket.
To fix 1, if the ticket TLSEXT is not written out, clear the expected
ticket flag.
To fix 2, consider a return of 0 from the ticket key cb a recoverable
error, and write a 0 length ticket and continue. The client-side code
can explicitly handle this case.
Fix these two cases, and add unit test code to validate ticket behavior.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1098)
This involves providing more session ticket key data, for both the cipher and
the digest
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
GH: #515, MR: #2153
Since 50932c4 "PACKETise ServerHello processing",
ssl_next_proto_validate() incorrectly allows empty protocol name.
draft-agl-tls-nextprotoneg-04[1] says "Implementations MUST ensure that
the empty string is not included and that no byte strings are
truncated."
This patch restores the old correct behavior.
[1] https://tools.ietf.org/html/draft-agl-tls-nextprotoneg-04
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Per RFC 5246,
Note: this extension is not meaningful for TLS versions prior to 1.2.
Clients MUST NOT offer it if they are offering prior versions.
However, even if clients do offer it, the rules specified in [TLSEXT]
require servers to ignore extensions they do not understand.
Although second sentence would suggest that there would be no interop
problems in always offering the extension, WebRTC has reported issues
with Bouncy Castle on < TLS 1.2 ClientHellos that still include
signature_algorithms. See also
https://bugs.chromium.org/p/webrtc/issues/detail?id=4223
RT#4390
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
Make OBJ_name_cmp internal
Rename idea_xxx to IDEA_xxx
Rename get_rfc_xxx to BN_get_rfc_xxx
Rename v3_addr and v3_asid functions to X509v3_...
Reviewed-by: Richard Levitte <levitte@openssl.org>
Move the dh_st structure into an internal header file and provide
relevant accessors for the internal fields.
Reviewed-by: Richard Levitte <levitte@openssl.org>
* Clear proposed, along with selected, before looking at ClientHello
* Add test case for above
* Clear NPN seen after selecting ALPN on server
* Minor documentation updates
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If a call to EVP_DecryptUpdate fails then a memory leak could occur.
Ensure that the memory is freed appropriately.
Issue reported by Guido Vranken.
Reviewed-by: Richard Levitte <levitte@openssl.org>
* Perform ALPN after the SNI callback; the SSL_CTX may change due to
that processing
* Add flags to indicate that we actually sent ALPN, to properly error
out if unexpectedly received.
* clean up ssl3_free() no need to explicitly clear when doing memset
* document ALPN functions
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Disabled by default, but can be enabled by setting the
ct_validation_callback on a SSL or SSL_CTX.
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Change the ECC default curve list to be this, in order: x25519, secp256r1,
secp521r1, secp384r1, brainpoolP256r1, brainpoolP384r1, and brainpool512r1.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
1) Simplify code with better PACKET methods.
2) Make broken SNI parsing explicit. SNI was intended to be extensible
to new name types but RFC 4366 defined the syntax inextensibly, and
OpenSSL has never parsed SNI in a way that would allow adding a new name
type. RFC 6066 fixed the definition but due to broken implementations
being widespread, it appears impossible to ever extend SNI.
3) Annotate resumption behaviour. OpenSSL doesn't currently handle all
extensions correctly upon resumption. Annotate for further clean-up.
4) Send an alert on ALPN protocol mismatch.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Add X25519 to TLS supported curve list.
Reject attempts to configure keys which cannot be used
for signing.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Adapted from BoringSSL. Added a test.
The extension parsing code is already attempting to already handle this for
some individual extensions, but it is doing so inconsistently. Duplicate
efforts in individual extension parsing will be cleaned up in a follow-up.
Reviewed-by: Stephen Henson <steve@openssl.org>
Add -DBIO_DEBUG to --strict-warnings.
Remove comments about outdated debugging ifdef guards.
Remove md_rand ifdef guarding an assert; it doesn't seem used.
Remove the conf guards in conf_api since we use OPENSSL_assert, not assert.
For pkcs12 stuff put OPENSSL_ in front of the macro name.
Merge TLS_DEBUG into SSL_DEBUG.
Various things just turned on/off asserts, mainly for checking non-NULL
arguments, which is now removed: camellia, bn_ctx, crypto/modes.
Remove some old debug code, that basically just printed things to stderr:
DEBUG_PRINT_UNKNOWN_CIPHERSUITES, DEBUG_ZLIB, OPENSSL_RI_DEBUG,
RL_DEBUG, RSA_DEBUG, SCRYPT_DEBUG.
Remove OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Certain code paths in tls_decrypt_ticket could return early without first
freeing the HMAC_CTX or the EVP_CIPHER_CTX.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove support for static ECDH ciphersuites. They require ECDH keys
in certificates and don't support forward secrecy.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
To enable heartbeats for DTLS, configure with enable-heartbeats.
Heartbeats for TLS have been completely removed.
This addresses RT 3647
Reviewed-by: Richard Levitte <levitte@openssl.org>
PACKET contents should be read-only. To achieve this, also
- constify two user callbacks
- constify BUF_reverse.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The protocol selection code is now consolidated in a few consecutive
short functions in a single file and is table driven. Protocol-specific
constraints that influence negotiation are moved into the flags
field of the method structure. The same protocol version constraints
are now applied in all code paths. It is now much easier to add
new protocol versions without reworking the protocol selection
logic.
In the presence of "holes" in the list of enabled client protocols
we no longer select client protocols below the hole based on a
subset of the constraints and then fail shortly after when it is
found that these don't meet the remaining constraints (suiteb, FIPS,
security level, ...). Ideally, with the new min/max controls users
will be less likely to create "holes" in the first place.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
If DSA parameters are absent return -1 (for unknown) in DSA_security_bits.
If parameters are absent when a certificate is set in an SSL/SSL_CTX
structure this will reject the certificate by default. This will cause DSA
certificates which omit parameters to be rejected but that is never (?)
done in practice.
Thanks to Brian 'geeknik' Carpenter for reporting this issue.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Move all calls of the OCSP callback into one place, rather than repeating it
in two different places.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
It makes no sense to call the OCSP status callback if we are resuming a
session because no certificates will be sent.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
If a server sends the status_request extension then it may choose
to send the CertificateStatus message. However this is optional.
We were treating it as mandatory and the connection was failing.
Thanks to BoringSSL for reporting this issue.
RT#4120
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
