few statements equivalent to "ENGINE_add(ENGINE_openssl())" etc. The inner
call to ENGINE_openssl() (as with other functions like it) orphans a
structural reference count. Second, the ENGINE_cleanup() function also
needs to clean up the functional reference counts held internally as the
list of "defaults" (ie. as used when RSA_new() requires an appropriate
ENGINE reference). So ENGINE_clear_defaults() was created and is called
from within ENGINE_cleanup(). Third, some of the existing code was
logically broken in its treatment of reference counts and locking (my
fault), so the necessary bits have been restructured and tidied up.
To test this stuff, compiling with ENGINE_REF_COUNT_DEBUG will cause every
reference count change (both structural and functional) to log a message to
'stderr'. Using with "openssl engine" for example shows this in action
quite well as the 'engine' sub-command cleans up after itself properly.
Also replaced some spaces with tabs.
* "ex_data" - a CRYPTO_EX_DATA structure in the ENGINE structure itself
that allows an ENGINE to store its own information there rather than in
global variables. It follows the declarations and implementations used
in RSA code, for better or worse. However there's a problem when storing
state with ENGINEs because, unlike related structure types in OpenSSL,
there is no ENGINE-vs-ENGINE_METHOD separation. Because of what ENGINE
is, it has method pointers as its structure elements ... which leads
to;
* ENGINE_FLAGS_BY_ID_COPY - if an ENGINE should not be used just as a
reference to an "implementation" (eg. to get to a hardware device), but
should also be able to maintain state, then this flag can be set by the
ENGINE implementation. The result is that any call to ENGINE_by_id()
will not result in the existing ENGINE being returned (with its
structural reference count incremented) but instead a new copy of the
ENGINE will be returned that can maintain its own state independantly of
any other copies returned in the past or future. Eg. key-generation
might involve a series of ENGINE-specific control commands to set
algorithms, sizes, module-keys, ids, ACLs, etc. A final command could
generate the key. An ENGINE doing this would *have* to declare
ENGINE_FLAGS_BY_ID_COPY so that the state of that process can be
maintained "per-handle" and unaffected by other code having a reference
to the same ENGINE structure.
This change adds some basic control commands to the existing ENGINEs
(except the software 'openssl' engine). All these engines currently load
shared-libraries for hardware APIs, so they've all been given "SO_PATH"
commands that will configure the chosen ENGINE to load its shared library
from the given path. Eg. by calling;
ENGINE_ctrl_cmd_string(e, "SO_PATH", <path>, 0).
The nCipher 'chil' ENGINE has also had "FORK_CHECK" and "THREAD_LOCKING"
commands added so these settings could be handled via application-level
configuration rather than in application source code.
Changes to "openssl engine" to test and examine these control commands will
be made shortly. It will also provide the necessary tips to application
programs wanting to support these dynamic control commands.
This change adds some new functionality to the ENGINE code and API to
make it possible for ENGINEs to describe and implement their own control
commands that can be interrogated and used by calling applications at
run-time. The source code includes numerous comments explaining how it all
works and some of the finer details. But basically, an ENGINE will normally
declare an array of ENGINE_CMD_DEFN entries in its ENGINE - and the various
new ENGINE_CTRL_*** command types take care of iterating through this list
of definitions, converting command numbers to names, command names to
numbers, getting descriptions, getting input flags, etc. These
administrative commands are handled directly in the base ENGINE code rather
than in each ENGINE's ctrl() handler, unless they specify the
ENGINE_FLAGS_MANUAL_CMD_CTRL flag (ie. if they're doing something clever or
dynamic with the command definitions).
There is also a new function, ENGINE_cmd_is_executable(), that will
determine if an ENGINE control command is of an "executable" type that
can be used in another new function, ENGINE_ctrl_cmd_string(). If not, the
control command is not supposed to be exposed out to user/config level
access - eg. it could involve the exchange of binary data, returning
results to calling code, etc etc. If the command is executable then
ENGINE_ctrl_cmd_string() can be called using a name/arg string pair. The
control command's input flags will be used to determine necessary
conversions before the control command is called, and commands of this
form will always return zero or one (failure or success, respectively).
This is set up so that arbitrary applications can support control commands
in a consistent way so that tweaking particular ENGINE behaviour is
specific to the ENGINE and the host environment, and independant of the
application or OpenSSL.
Some code demonstrating this stuff in action will applied shortly to the
various ENGINE implementations, as well as "openssl engine" support for
executing arbitrary control commands before and/or after initialising
various ENGINEs.
The existing ENGINEs (including the default 'openssl' software engine) were
static, declared inside the source file for each engine implementation. The
reason this was not going boom was that all the ENGINEs had reference
counts that never hit zero (once linked into the internal list, each would
always have at least 1 lasting structural reference).
To fix this so it will stay standing when an "unload" function is added to
match ENGINE_load_builtin_engines(), the "constructor" functions for each
ENGINE implementation have been changed to dynamically allocate and
construct their own ENGINEs using API functions. The other benefit of this
is that no ENGINE implementation has to include the internal "engine_int.h"
header file any more.
Previously RAND_get_rand_method was returning a non-const pointer, but it
should be const. As with all other such cases, METHOD pointers are stored and
returned as "const". The only methods one should be able to alter are methods
"local" to the relevant code, in which case a non-const handle to the methods
should already exist.
This change has been forced by the constifying of the ENGINE code (before
which RAND_METHOD was the only method pointer in an ENGINE structure that was
not constant).
ENGINE handler functions should take the ENGINE structure as a parameter -
this is because ENGINE structures can be copied, and like other
structure/method setups in OpenSSL, it should be possible for init(),
finish(), ctrl(), etc to adjust state inside the ENGINE structures rather
than globally. This commit includes the dependant changes in the ENGINE
implementations.
Previous changes permanently removed the commented-out old code for where
it was possible to create and use an ENGINE statically, and this code gets
rid of the ENGINE_FLAGS_MALLOCED flag that supported the distinction with
dynamically allocated ENGINEs. It also moves the area for ENGINE_FLAGS_***
values from engine_int.h to engine.h - because it should be possible to
declare ENGINEs just from declarations in exported headers.
* Constify the get/set functions, and add some that functions were missing.
* Add a new 'ENGINE_cpy()' function that will produce a new ENGINE based
copied from an original (except for the references, ie. the new copy will
be like an ENGINE returned from 'ENGINE_new()' - a structural reference).
* Removed the "null parameter" checking in the get/set functions - it is
legitimate to set NULL values as a way of *changing* an ENGINE (ie.
removing a handler that previously existed). Also, passing a NULL pointer
for an ENGINE is obviously wrong for these functions, so don't bother
checking for it. The result is a number of error codes and strings could
be removed.
without releasing a lock. This is the same fix as applied to
OpenSSL-engine-0_9_6-stable, minus the ENGINE_ctrl() change - the HEAD
already had that fixed.
des_encrypt() and des_encrypt() defined on some systems (Solaris and
Unixware and maybe others), we rename des_encrypt() to des_encrypt1().
This should have very little impact on external software unless
someone has written a mode of DES, since that's all des_encrypt() is
meant for.
the 'ca' utility. This can now be extensively
customised in the configuration file and handles
multibyte strings and extensions properly.
This is required when extensions copying from
certificate requests is supported: the user
must be able to view the extensions before
allowing a certificate to be issued.
It does not appear to be faster than the current Montgomery code
except for very small moduli (somewhere between 192 and 224 bits
in a 64-bit Sun environment, and even less than 192 bits
on 32 bit systems).
abort with errors if no name is defined for some object, which was the
case for 'pilotAttributeType 27'.
Also avoid this very situation by assigning the name
'pilotAttributeType27'.
sets the subject name for a new request or supersedes the
subject name in a given request.
Add options '-batch' and '-verbose' to 'openssl req'.
Submitted by: Massimiliano Pala <madwolf@hackmasters.net>
Reviewed by: Bodo Moeller
functions on platform were that's the best way to handle exporting
global variables in shared libraries. To enable this functionality,
one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
"OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
is normally done by Configure or something similar).
To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
in the source file (foo.c) like this:
OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
OPENSSL_IMPLEMENT_GLOBAL(double,bar);
To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
OPENSSL_DECLARE_GLOBAL(int,foo);
#define foo OPENSSL_GLOBAL_REF(foo)
OPENSSL_DECLARE_GLOBAL(double,bar);
#define bar OPENSSL_GLOBAL_REF(bar)
The #defines are very important, and therefore so is including the
header file everywere where the defined globals are used.
The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
of ASN.1 items, but that structure is a bt different.
The largest change is in util/mkdef.pl which has been enhanced with
better and easier to understand logic to choose which symbols should
go into the Windows .def files as well as a number of fixes and code
cleanup (among others, algorithm keywords are now sorted
lexicographically to avoid constant rewrites).
change the way ASN1 modules are exported.
Still needs a bit of work for example the hack which a
dummy function prototype to avoid compilers warning about
multiple ;s.
really see why we need to define these function pointers with MS_FAR
if it's not done cosistently everywhere.
If we decide to support MS_FAR modifiers, it's better to have the
named something more unique for OpenSSL and to define them in e_os2.h.
and make all files the depend on it include it without prefixing it
with openssl/.
This means that all Makefiles will have $(TOP) as one of the include
directories.
example) are declared with some extra linkage information. This
generates a warning when using the function name as a value to a
regular function pointer with the "correct" definition of the
function. Therefore, use a macro to cast the appropriate function on
VMS.
callbacks, and their prototypes were consistent as they were. These casts
need reversing.
Also, I personally find line breaks during parameter lists (ie a line
ending in a comma) easier to read at a glance than line breaks at the end
of a function call and before a dereference on the return value (ie a line
ending in a closed-bracket followed by a line starting with "->").
sure they are available in opensslconf.h, by giving them names starting
with "OPENSSL_" to avoid conflicts with other packages and by making
sure e_os2.h will cover all platform-specific cases together with
opensslconf.h.
I've checked fairly well that nothing breaks with this (apart from
external software that will adapt if they have used something like
NO_KRB5), but I can't guarantee it completely, so a review of this
change would be a good thing.
Remove the old broken bio read of serial numbers in the 'ca' index
file. This would choke if a revoked certificate was specified with
a negative serial number.
Fix typo in uid.c
Make ca.c correctly initialize the revocation date.
Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string() set the
string type: so they can initialize ASN1_TIME structures properly.
Bleichenbacher's DSA attack. With this implementation, the expected
number of iterations never exceeds 2.
New semantics for BN_rand_range():
BN_rand_range(r, min, range) now generates r such that
min <= r < min+range.
(Previously, BN_rand_range(r, min, max) generated r such that
min <= r < max.
It is more convenient to have the range; also the previous
prototype was misleading because max was larger than
the actual maximum.)
only happened when the port number wasn't parsable ot the host wasn't
possible to convert to an IP address.
Contributed by Niko Baric <Niko.Baric@epost.de>
Add protoype for OCSP_response_create().
Add OCSP_request_sign() and OCSP_basic_sign()
private key and certificate checks and make
OCSP_NOCERTS consistent with PKCS7_NOCERTS
certificates.
One is a valid CA which has no basicConstraints
but does have certSign keyUsage.
Other is S/MIME signer with nonRepudiation but
no digitalSignature.
like spaces before the semicolon, and besides, other parts of this
file makes the values without those spaces), and move spacing of
continuation lines to support BIO's that break lines after each
write.
OCSP requests. It can also query reponders and parse or
print out responses.
Still needs some more work: OCSP response checks and
of course documentation.
invalid format in OCSP request signatures.
Add spaces to OCSP HTTP header.
Change X509_NAME_set() there's no reason
why it should return an error if the
destination points to NULL... though it
should if the destination is NULL.
but will verify the signatures on a response
and locate the signers certifcate.
Still needs to implement a proper OCSP certificate
verify.
Fix warning in RAND_egd().
allocation callbacks so that it is no longer visible to applications
that these live at a different call level than conventional memory
allocation callbacks.
