The sources for internal tests were sometimes badly formed, assuming
perl variables such as $target{cpuid_asm_src} contains only one file
name. This change correctly massages all file names in such a
variable.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1850)
The test fixtures are (meant to be) useful for sharing common
setup. Don't bother when we don't have any setup/teardown.
This only addresses simple tests. Parameterized tests (ADD_ALL_TESTS)
will be made more user-friendly in a follow-up.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The updated shim has the ability to skip tests using unimplemented flags.
This should reduce the number of test failures.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Added the file README.external which describes how to build and run OpenSSL
to use the BoringSSL test suite. Also updated INSTALL to point to it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Use the newly added "executable" function rather than "system". Also filter
the output to add a prefix to every line so that the "ok" doesn't confuse
Test::More
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
This just disables all tests that fail at the moment. Over time we will
want to go over these and figure out why they are failing (and fix them if
appropriate)
Reviewed-by: Richard Levitte <levitte@openssl.org>
This adds a test to the OpenSSL test suite to invoke the BoringSSL test
suite.
It assumes you have already compiled the ossl_shim (see previous commit).
It also assumes that you have an environment variable BORING_RUNNER_DIR
set up to point to the ssl/test/runner directory of a checkout of BoringSSL.
This has only been tested with a very old version of BoringSSL (from commit
f277add6c) - since that was the last known checkout where the shim compiles
successfully. Even with that version of BoringSSL this test will fail. There
are lots of Boring tests that are failing for various reasons. Some might
be due to bugs in OpenSSL, some might be due to features that BoringSSL has
that OpenSSL doesn't, some are due to assumptions about the way BoringSSL
behaves that are not true for OpenSSL etc.
To get the verbose BoringSSL test output, run like this:
VERBOSE=1 BORING_RUNNER_DIR=/path/to/boring/ssl/test/runner make \
TESTS="test_external" test
Reviewed-by: Richard Levitte <levitte@openssl.org>
The BoringSSL test suite contains numerous tests which OpenSSL does not.
The BoringSSL test runner uses a shim to launch the library and execute the
tests. This is a version of the BoringSSL shim converted to compile against
OpenSSL instead.
This is primarily based on the work of David Benjamin from the BoringSSL
project who did most of the necessary conversion. It also includes a few
other tweaks for opacity changes etc.
This is based on a *very* old version of BoringSSL from commit f277add6c.
That was the last commit known to work with this patched shim. Later
versions may also work but lots of merge conflicts occur when trying to
bring it up to date.
At the moment this has not been integrated into the build system. There is
a very simple standalone makefile in the ossl_shim directory which should
be executed directly before tyring to use the shim.
Reviewed-by: Richard Levitte <levitte@openssl.org>
test/shlibloadtest.c assumes all Unix style platforms use .so as
shared library extension. This is not the case for Mac OS X, which
uses .dylib. Instead of this, have the test recipe find out the
extension from configuration data.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1844)
- Make sure to initialise SHLIB variables
- Make sure to make local variables static
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1838)
This should demonstrate that the atexit() handling is working properly (or
at least not crashing) on process exit.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Also we disable TLS1.3 by default (use enable-tls1_3 to re-enable). This is
because this is a WIP and will not be interoperable with any other TLS1.3
implementation.
Finally, we fix some tests that started failing when TLS1.3 was disabled by
default.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Includes addition of the various options to s_server/s_client. Also adds
one of the new TLS1.3 ciphersuites.
This isn't "real" TLS1.3!! It's identical to TLS1.2 apart from the protocol
and the ciphersuite...and the ciphersuite is just a renamed TLS1.2 one (not
a "real" TLS1.3 ciphersuite).
Reviewed-by: Rich Salz <rsalz@openssl.org>
A BIO_read() 0 return indicates that a failure occurred that may be
retryable. An SSL_read() 0 return indicates a non-retryable failure. Check
that if BIO_read() returns 0, SSL_read() returns <0. Same for SSL_write().
The asyncio test filter BIO already returns 0 on a retryable failure so we
build on that.
Reviewed-by: Richard Levitte <levitte@openssl.org>
So far, apps and test programs, were a bit rigidely accessible as
executables or perl scripts. But what about scripts in some other
language? Or what about running entirely external programs? The
answer is certainly not to add new functions to access scripts for
each language or wrapping all the external program calls in our magic!
Instead, this adds a new functions, cmd(), which is useful to access
executables and scripts in a more generalised manner. app(), test(),
fuzz(), perlapp() and perltest() are rewritten in terms of cmd(), and
serve as examples how to do something similar for other scripting
languages, or constrain the programs to certain directories.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1686)
The prevailing style seems to not have trailing whitespace, but a few
lines do. This is mostly in the perlasm files, but a few C files got
them after the reformat. This is the result of:
find . -name '*.pl' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
find . -name '*.c' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
find . -name '*.h' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
Then bn_prime.h was excluded since this is a generated file.
Note mkerr.pl has some changes in a heredoc for some help output, but
other lines there lack trailing whitespace too.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Add update for testing renegotiation. Also change info on CTLOG_FILE
environment variable - which always seems to be required.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The TLSProxy::Record->new call hard-codes a version, like
70-test_sslrecords.t.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
This is a regression test for
https://github.com/openssl/openssl/pull/1431. It tests a
maximally-padded record with each possible invalid offset.
This required fixing a bug in Message.pm where the client sending a
fatal alert followed by close_notify was still treated as success.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
A mem leak could occur on an error path. Also the mempacket BIO_METHOD
needs to be cleaned up, because of the newly added DTLS test.
Also fixed a double semi-colon in ssltestlib.c
Reviewed-by: Rich Salz <rsalz@openssl.org>
There are cases when argc is more trustable than proper argv termination.
Since we trust argc in all other test programs, we might as well treat it
the same way in this program.
Reviewed-by: Matt Caswell <matt@openssl.org>
All the other functions that take an argument for the number of bytes
use convenience macros for this purpose. We should do the same with
WPACKET_put_bytes().
Reviewed-by: Rich Salz <rsalz@openssl.org>
Updated the construction code to use the new function. Also added some
convenience macros for WPACKET_sub_memcpy().
Reviewed-by: Rich Salz <rsalz@openssl.org>
A few style tweaks here and there. The main change is that curr and
packet_len are now offsets into the buffer to account for the fact that
the pointers can change if the buffer grows. Also dropped support for the
WPACKET_set_packet_len() function. I thought that was going to be needed
but so far it hasn't been. It doesn't really work any more due to the
offsets change.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The tests will only work in no-shared builds because WPACKET is an
internal only API that does not get exported by the shared library.
Reviewed-by: Rich Salz <rsalz@openssl.org>
So far, the test runner (test/run_tests.pl) could get a list of tests
to run, and if non were given, it assumes all available tests should
be performed.
However, that makes skipping just one or two tests a bit of a pain.
This change makes the possibilities more versatile, run_checker.pl
takes these arguments and will process them in the given order,
starting with an empty set of tests to perform:
alltests The current set becomes the whole set of
available tests.
test_xxx Adds 'test_xxx' to the current set.
-test_xxx Removes 'test_xxx' from the current set. If
nothing has been added to the set before this
argument, the current set is first initialised
to the whole set of available tests, then
'test_xxx' is removed from the current set.
list Display all available tests, then stop.
If no arguments are given, 'alltests' is assumed.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
These tests take a very long time on some platforms, and arent't
always strictly necessary. This makes it possible to turn them
off. The necessary binaries are still built, though, in case
someone still wants to do a manual run.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The previous commit revealed a long standing problem where CertStatus
processing was broken in DTLS. This would have been revealed by better
testing - so add some!
Reviewed-by: Rich Salz <rsalz@openssl.org>
User can make Windows openssl.exe to treat command-line arguments
and console input as UTF-8 By setting OPENSSL_WIN32_UTF8 environment
variable (to any value). This is likely to be required for data
interchangeability with other OSes and PKCS#12 containers generated
with Windows CryptoAPI.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Test doesn't work on Windows with non-Greek locale, because of
Win32 perl[!] limitation, not OpenSSL. For example it passes on
Cygwin and MSYS...
Reviewed-by: Matt Caswell <matt@openssl.org>
There was a block of code at the start that used the Camellia cipher. The
original idea behind this was to fill the buffer with non-zero data so that
oversteps can be detected. However this block failed when using no-camellia.
This has been replaced with a RAND_bytes() call.
I also updated the the CTR test section, since it seems to be using a CBC
cipher instead of a CTR cipher.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Also, re-organize RSA check to use goto err.
Add a test case.
Try all checks, not just stopping at first (via Richard Levitte)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
The variable 'buffer', allocated by EC_POINT_point2buf(), isn't
free'd on the success path.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
In mempacket_test_read(), we've already fetched the top value of the
stack, so when we shift the stack, we don't care for the value. The
compiler needs to be told, or it will complain harshly when we tell it
to be picky.
Reviewed-by: Matt Caswell <matt@openssl.org>
Originally PKCS#12 subroutines treated password strings as ASCII.
It worked as long as they were pure ASCII, but if there were some
none-ASCII characters result was non-interoperable. But fixing it
poses problem accessing data protected with broken password. In
order to make asscess to old data possible add retry with old-style
password.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Clang was complaining about some unused functions. Moving the stack
declaration to the header seems to sort it. Also the certstatus variable
in dtlstest needed to be declared static.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Injects a record from epoch 1 during epoch 0 handshake, with a record
sequence number in the future, to test that the record replay protection
feature works as expected. This is described more fully in the next commit.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add a test to inject a record from the next epoch during the handshake and
make sure it doesn't get processed immediately.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Split the create_ssl_connection() helper function into two steps: one to
create the SSL objects, and one to actually create the connection. This
provides the ability to make changes to the SSL object before the
connection is actually made.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This adds a BIO similar to a normal mem BIO but with datagram awareness.
It also has the capability to inject additional packets at arbitrary
locations into the BIO, for testing purposes.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Dump out the records passed over the BIO. Only works for DTLS at the
moment but could easily be extended to TLS.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make maximum fragment length configurable and add various fragmentation
tests, in addition to the existing multi-buffer tests.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In practice, CT isn't really functional without EC anyway, as most logs
use EC keys. So, skip loading the log list with no-ec, and skip CT tests
completely in that conf.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This commit only ports existing tests, and adds some coverage for
resumption. We don't appear to have any handshake tests that cover SCT
validation success, and this commit doesn't change that.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In NPN and ALPN, the protocol is renegotiated upon resumption. Test that
resumption picks up changes to the extension.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Move custom server and client options from the test dictionary to an
"extra" section of each server/client. Rename test expectations to say
"Expected".
This is a big but straightforward change. Primarily, this allows us to
specify multiple server and client contexts without redefining the
custom options for each of them. For example, instead of
"ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols",
we now have, "NPNProtocols".
This simplifies writing resumption and SNI tests. The first application
will be resumption tests for NPN and ALPN.
Regrouping the options also makes it clearer which options apply to the
server, which apply to the client, which configure the test, and which
are test expectations.
Reviewed-by: Richard Levitte <levitte@openssl.org>
These were guarded by $disabled{tests}. However, 'tests' is disabled
if we configure 'no-stdio', which means that we don't detect the lack
of OPENSSL_NO_STDIO guards in our public header files. So we move the
generation and build of test/buildtest_*.c to be unconditional.
Reviewed-by: Rich Salz <rsalz@openssl.org>
SSL_set_rbio() and SSL_set_wbio() are new functions in 1.1.0 and really
should be called SSL_set0_rbio() and SSL_set0_wbio(). The old
implementation was not consistent with what "set0" means though as there
were special cases around what happens if the rbio and wbio are the same.
We were only ever taking one reference on the BIO, and checking everywhere
whether the rbio and wbio are the same so as not to double free.
A better approach is to rename the functions to SSL_set0_rbio() and
SSL_set0_wbio(). If an existing BIO is present it is *always* freed
regardless of whether the rbio and wbio are the same or not. It is
therefore the callers responsibility to ensure that a reference is taken
for *each* usage, i.e. one for the rbio and one for the wbio.
The legacy function SSL_set_bio() takes both the rbio and wbio in one go
and sets them both. We can wrap up the old behaviour in the implementation
of that function, i.e. previously if the rbio and wbio are the same in the
call to this function then the caller only needed to ensure one reference
was passed. This behaviour is retained by internally upping the ref count.
This commit was inspired by BoringSSL commit f715c423224.
RT#4572
Reviewed-by: Rich Salz <rsalz@openssl.org>
This adds some simple SSL BIO tests that check for pushing and popping of
BIOs into the chain. These tests would have caught the bugs fixed in the
previous three commits, if combined with a crypto-mdebug build.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The SSL_set_bio() function has some complicated ownership rules. This adds a
test to make sure it all works as expected.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Don't emit duplicate server/client sections when they are
identical. Instead, just point to the same section.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add tests for resuming with a different client version.
This happens in reality when clients persist sessions on disk through
upgrades.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Systematically test every server-side version downgrade or upgrade.
Client version upgrade or downgrade could be tested analogously but will
be done in a later change.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Fix some indentation at the same time
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1292)
Add some more tests for sessions following on from the previous commit
to ensure the callbacks are called when appropriate.
Reviewed-by: Richard Levitte <levitte@openssl.org>
In TLS during ClientAuth if the CA is not recognised you should get an
UnknownCA alert. In SSLv3 this does not exist and you should get a
BadCertificate alert.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The Client Auth tests were not correctly setting the Protocol, so that this
aspect had no effect. It was testing the same thing lots of times for
TLSv1.2 every time.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
In light of potential UKS (unknown key share) attacks on some
applications, primarily browsers, despite RFC761, name checks are
by default applied with DANE-EE(3) TLSA records. Applications for
which UKS is not a problem can optionally disable DANE-EE(3) name
checks via the new SSL_CTX_dane_set_flags() and friends.
Reviewed-by: Rich Salz <rsalz@openssl.org>
subject alternate names.
Add nameConstraints tests incluing DNS, IP and email tests both in
subject alt name extension and subject name.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If application uses any of Windows-specific interfaces, make it
application developer's respondibility to include <windows.h>.
Rationale is that <windows.h> is quite "toxic" and is sensitive
to inclusion order (most notably in relation to <winsock2.h>).
It's only natural to give complete control to the application developer.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Now that INCLUDE considers both the source and build trees, no need
for the rel2abs perl fragment hacks any more.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1264)
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1264)
Observe that the old tests were partly ill-defined:
setting sn_server1 but not sn_server2 in ssltest_old.c does not enable
the SNI callback.
Fix this, and also explicitly test both flavours of SNI mismatch (ignore
/ fatal alert). Tests still pass.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The previous commit fixed a problem where fragmented alerts would cause an
infinite loop. This commit adds a test for these fragmented alerts.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The previous fix contained a mistake, where any absolute path in
%directories would be cleared away instead of just being left alone.
Reviewed-by: Rich Salz <rsalz@openssl.org>
We recalculate the location of the directories we keep track of.
However, we did so after having moved to the new directory already, so
the data we did the calculations from were possibly not quite correct.
This change moves the calculations to happen before moving to the new
directory.
This issue is sporadic, and possibly dependent on the platform.
Reviewed-by: Matt Caswell <matt@openssl.org>
This extends 'req' to take more than one DN component, and to take
them as full DN components and not just CN values. All other commands
are changed to pass "CN = $cn" instead of just a CN value.
This adds 'genpc', which differs from the other 'gen*' commands by not
calling 'req', and expect the result from 'req' to come through stdin.
Finally, test/certs/setup.sh gets the commands needed to generate a
few proxy certificates.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
Reorder arguments to follow convention.
Also allow r/s to be NULL in DSA_SIG_get0, similarly to ECDSA_SIG_get0.
This complements GH1193 which adds non-const setters.
Reviewed-by: Rich Salz <rsalz@openssl.org>
On some platforms we can't startup the TLSProxy due to environmental
problems (e.g. network set up on the build machine). These aren't OpenSSL
problems so we shouldn't treat them as test failures. Just visibly
indicate that we are skipping the test.
We only skip the first time we attempt to start up the proxy. If that works
then everything else should do...if not we should probably investigate and
so report as a failure.
This also removes test_networking...there is a danger that this turns into
a test of user's environmental set up rather than OpenSSL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
VMS C doesn't allow symbols longer than 31 characters. We do the
automatic shortening with the library files, but not otherwise (to
make sure to work the VMS C magic).
For consistency, I shortened other similar symbols in the same manner.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This commit adds some session API tests, and in particular tests the
modified behaviour of SSL_set_session() introduced in the last commit. To
do this I have factored out some common code from the asynciotest into a
new ssltestlib.c file. I've also renamed getsettest to sslapitest as this
more closely matches what it now is!
Reviewed-by: Rich Salz <rsalz@openssl.org>
The SNI tests introduced a redundant "server2" section into every test
configuration. Copy this automatically from "server" unless testing SNI,
to reduce noise in the generated confs.
Also remove duplicate SSL_TEST_CTX_create (merge conflict error).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Some Linux platforms have a suitably recent kernel to support AFALG, but
apparently you still can't actually create an afalg socket. This extends
the afalg_chk_platform() function to additionally check whether we can
create an AFALG socket. We also amend the afalgtest to not report a
failure to load the engine as a test failure. A failure to load is almost
certainly due to platform environmental issues, and not an OpenSSL problem.
RT 4434
Reviewed-by: Andy Polyakov <appro@openssl.org>
- Only send SNI in SNI tests. This allows us to test handshakes without
the SNI extension as well.
- Move all handshake-specific machinery to handshake_helper.c
- Use enum types to represent the enum everywhere
(Resorting to plain ints can end in sign mismatch when the enum is
represented by an unsigned type.)
Reviewed-by: Rich Salz <rsalz@openssl.org>
We already test in EC_POINT_oct2point that points are on the curve. To
be on the safe side, move this check to
EC_POINT_set_affine_coordinates_* so as to also check point coordinates
received through some other method.
We do not check projective coordinates, though, as
- it's unlikely that applications would be receiving this primarily
internal representation from untrusted sources, and
- it's possible that the projective setters are used in a setting where
performance matters.
Reviewed-by: Rich Salz <rsalz@openssl.org>
When session tickets are used, it's possible that SNI might swtich the
SSL_CTX on an SSL. Normally, this is not a problem, because the
initial_ctx/session_ctx are used for all session ticket/id processes.
However, when the SNI callback occurs, it's possible that the callback
may update the options in the SSL from the SSL_CTX, and this could
cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things
can happen:
1. The session ticket TLSEXT may not be written when the ticket expected
flag is set. The state machine transistions to writing the ticket, and
the client responds with an error as its not expecting a ticket.
2. When creating the session ticket, if the ticket key cb returns 0
the crypto/hmac contexts are not initialized, and the code crashes when
trying to encrypt the session ticket.
To fix 1, if the ticket TLSEXT is not written out, clear the expected
ticket flag.
To fix 2, consider a return of 0 from the ticket key cb a recoverable
error, and write a 0 length ticket and continue. The client-side code
can explicitly handle this case.
Fix these two cases, and add unit test code to validate ticket behavior.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1098)
Various fixes to get the following to compile:
./config no-asm -ansi -D_DEFAULT_SOURCE
RT4479
RT4480
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The previous commit changed how we handle out-of-context empty records.
This commit adds some tests for the various scenarios. There are three
tests:
1: Check that if we inject an out-of-context empty record then we fail
2: Check that if we inject an in-context empty record then we succeed
3: Check that if we inject too many in-context empty records then we fail.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The previous commit fixed a bug with BN_mod_word() which would have been
caught if we had a test for it. This commit adds one.
Reviewed-by: Andy Polyakov <appro@openssl.org>
If we're going to redirect STDERR and STDOUT, it's better to do it by
the book. This fix is a straight copy of examples in the perlfunc
manual.
Reviewed-by: Matt Caswell <matt@openssl.org>
The flags RSA_FLAG_NO_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME and
DH_FLAG_NO_EXP_CONSTTIME which previously provided the ability to switch
off the constant time implementation for RSA, DSA and DH have been made
no-ops and deprecated.
Reviewed-by: Richard Levitte <levitte@openssl.org>
In rare cases, the shell we run test programs in may have complaints.
Shut those up unless testing verbosely.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Since one generates files that the other depends on, there's no
real reason to keep them separate. Since they were both different
aspects of 'openssl req', the merge ends up in 25-test_req.t.
This also makes cleanup easier.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Generate small test programs to check that external programs can be
built with our stuff at a very basic level.
For now, they check that each of our header files can be included
individually without compile failure.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Port client auth tests to the new framework, add coverage. The old tests
were only testing success, and only for some protocol versions; the new
tests add all protocol versions and various failure modes.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add copyright to missing assembler files.
Add copyrights to missing test/* files.
Add copyrights
Various source and misc files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Trying to use normal perl conditions to conditionally 'use' a perl
module didn't quite work. Using the 'if' module to do so does work.
Reviewed-by: Andy Polyakov <appro@openssl.org>
As it turns out default glob's behaviour for quoted argument varies
from version to version, making it impossible to Configure or run
tests in some cases. The reason for quoting globs was to accommodate
source path with spaces in its name, which was treated by default glob
as multiple paths. File::Glob::glob on the other hand doesn't consider
spaces as delimiters and therefore works with unquoted patterns.
[Unfortunaltely File::Glob::glob, being too csh-ly, doesn't work
on VMS, hence the "pinning" is conditional.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
If using the msys console then msys attempts to "fix" command line
arguments to convert them from Unix style to Windows style. One of the
things it does is to look for arguments seperated by colons. This it
assumes is a list of file paths, so it replaces the colon with a semi-colon.
This was causing one of our tests to fail when calling the "req" command
line app. We were attempting to create a new DSA key and passing the
argument "dsa:../apps/dsa1024.pem". This is exactly what we intended but
Msys mangles it to "dsa;../apps/dsa1024.pem" and the command fails.
There doesn't seem to be a way to suppress Msys name mangling. Fortunately
we can work around this issue by generating the DSA key in a separate step
by calling "gendsa".
RT#4255
Reviewed-by: Richard Levitte <levitte@openssl.org>
Clang was complaining about some variables possibly being uninitialized
when used. The warnings are bogus, but clang can't figure that out. This
silences the warnings.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Previous commits fixed the implementation of the %e and %g format
specifiers as well as other issues. This commit adds a test.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This adds an async IO test. There are two test runs. The first one does
a normal handshake with lots of async IO events. The second one does the
same but this time breaks up all the written records into multiple records
of one byte in length. We do this all the way up until the CCS.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The write BIO for handshake messages is bufferred so that we only write
out to the network when we have a complete flight. There was some
complexity in the buffering logic so that we switched buffering on and
off at various points through out the handshake. The only real reason to
do this was historically it complicated the state machine when you wanted
to flush because you had to traverse through the "flush" state (in order
to cope with NBIO). Where we knew up front that there was only going to
be one message in the flight we switched off buffering to avoid that.
In the new state machine there is no longer a need for a flush state so
it is simpler just to have buffering on for the whole handshake. This
also gives us the added benefit that we can simply call flush after every
flight even if it only has one message in it. This means that BIO authors
can implement their own buffering strategies and not have to be aware of
the state of the SSL object (previously they would have to switch off
their own buffering during the handshake because they could not rely on
a flush being received when they really needed to write data out). This
last point addresses GitHub Issue #322.
Reviewed-by: Andy Polyakov <appro@openssl.org>
In some cases, perl's glob() thinks it needs to return file names with
generation numbers, such as when a file name pattern includes two
periods. Constructing other file names by simple appending to file
names with generation numbers isn't a good idea, so for the VMS case,
just peal the generation numbers if they are there.
Fortunately, this is easy, as the returned generation number delimiter
will always be a semi-colon.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If the server does not send a session ticket extension, it should not then
send the NewSessionTicket message.
If the server sends the session ticket extension, it MUST then send the
NewSessionTicket message.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The old proxy tests test the implementation of an application proxy
policy callback defined in the test itself, which is not particularly
useful.
It is, however, useful to test cert verify overrides in
general. Therefore, replace these tests with tests for cert verify
callback behaviour.
Also glob the ssl test inputs on the .in files to catch missing
generated files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The old cipherlist test in ssltest.c only tests the internal order of
the cipher table, which is pretty useless.
Replace this test with a test that catches inadvertent changes to the
default cipherlist.
Fix run_tests.pl to correctly filter tests that have "list" in their name.
(Also includes a small drive-by fix in .gitignore.)
Reviewed-by: Rich Salz <rsalz@openssl.org>
