In an earlier attempt to simplify the processing of disabled options,
'no-err' and 'no-async' stopped working properly. 'err' and 'async'
are directories under 'crypto/', but they are special insofar that
they can't be simply skipped, like all the algorithm directories can,
so they need special treatment among the disablable things.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Traditionally Configure passed $ENV{PERL} to Makefile. But this
resulted in ambiguilty as Configure script could be executed by
interpreter different from one executing remaining scripts. Since
we separate compile- and run-time interpreters with HASHBANGPERL
variable, there is no reason to segment the build procedure.
Reviewed-by: Rich Salz <rsalz@openssl.org>
With extensive help and feedback from Richard and Andy.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
The background story is that util/shlib_wrap.sh was setting LD_PRELOAD
or similar platform dependent variables, just in case the shared
libraries were built with -rpath. Unfortunately, this doesn't work
too well with asan, msan or ubsan.
So, the solution is to forbid the combination of shared libraries,
-rpath and any of the sanity analyzers we can configure.
This changes util/shlib_wrap.sh so it only contains the code that sets
LD_PRELOAD when -rpath has been used when configuring.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The way we figured out what options are crypto algorithms and what are
something other was somewhat sketchy. This change bases the
distinction on available sdirs instead.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Because some targets execute perl code that might die, we risk
incomplete lists. Make it so dying doesn't happen when we're listing
targets.
Reviewed-by: Rich Salz <rsalz@openssl.org>
These tests take a very long time on some platforms, and arent't
always strictly necessary. This makes it possible to turn them
off. The necessary binaries are still built, though, in case
someone still wants to do a manual run.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Note: some shells do not like the command verb to be quoted, so we avoid
it unless it's actually necessary.
RT#4665
Reviewed-by: Rich Salz <rsalz@openssl.org>
Build file templates would be looked up like this if the user gave us
an additional directory to look for configuration files and build file
templates:
$OPENSSL_LOCAL_CONFIG_DIR/$OSTYPE-Makefile.tmpl
$SOURCEDIR/Configurations/$OSTYPE-Makefile.tmpl
$OPENSSL_LOCAL_CONFIG_DIR/Makefile.tmpl
$SOURCEDIR/Configurations/Makefile.tmpl
So for example, if the user created his own Makefile.tmpl and tried to
use it with a unixly config, it would never be user because we have a
unix-Makefile.tmpl in our Configurations directory. This is clearly
wrong, and this change makes it look in this order instead:
$OPENSSL_LOCAL_CONFIG_DIR/$OSTYPE-Makefile.tmpl
$OPENSSL_LOCAL_CONFIG_DIR/Makefile.tmpl
$SOURCEDIR/Configurations/$OSTYPE-Makefile.tmpl
$SOURCEDIR/Configurations/Makefile.tmpl
Reviewed-by: Rich Salz <rsalz@openssl.org>
The definition of STITCHED_CALL relies on OPENSSL_NO_ASM. However,
when a configuration simply lacks the assembler implementation for RC4
(which is where we have implemented the stitched call), OPENSSL_NO_ASM
isn't implemented. Better, then, to rely on specific macros that
indicated that RC4 (and MD5) are implemented in assembler.
For this to work properly, we must also make sure Configure adds the
definition of RC4_ASM among the C flags.
Reviewed-by: Andy Polyakov <appro@openssl.org>
@disablables is sorted, but these were just added at the end of
%disabled in commits c2e27310 and 22e3dcb7.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
PROGRAM_NO_INST, ENGINES_NO_INST, SCRIPTS_NO_INST and LIBS_NO_INST are
to be used to specify program, engines, scripts and libraries that are
not to be installed in the system. Fuzzers, test programs, that sort
of things are of the _NO_INST type, for example.
For the benefit of build file templates and other templates that use
data from configdata.pm, a new hash table $unified_info{install} is
created. It contains a set of subhashes, one for each type of
installable, each having an array of file names as values. For
example, it can look like this:
"install" =>
{
"engines" =>
[
"engines/afalg/afalg",
"engines/capi",
"engines/dasync",
"engines/padlock",
],
"libraries" =>
[
"libcrypto",
"libssl",
],
"programs" =>
[
"apps/openssl",
],
"scripts" =>
[
"apps/CA.pl",
"apps/tsget",
"tools/c_rehash",
],
},
Reviewed-by: Rich Salz <rsalz@openssl.org>
Instead of having fuzz/build.info.fuzz magically and conditionally
included along with the other build.info files, incorporate it in
fuzz/build.info and add the conditions there instead.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Make it possible to have a separate and different perl command string
for installable scripts than we use when building, with the
environment variable HASHBANGPERL. Its value default to the same as
the environment PERL if it's defined, otherwise '/usr/bin/env perl'.
Note: this is only relevant for Unix-like environments.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
INCLUDE statements in build.info files were source tree centric. That
meant that to get include directory specs in the build tree, we had to
resort to perl fragments that specified the build tree include paths
as absolute ones.
This change has the INCLUDE statement consider both the source and
build tree for any include directory. It means that there may be some
extra unnecessary include paths, but it also makes life simpler for
anyone who makes changes in the build.info files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
mkdef.pl was failing to understand no-ripemd. This is a deprecated option
which should act as an alias for no-rmd160.
Reviewed-by: Richard Levitte <levitte@openssl.org>
'DEPEND[]=file.h' becomes a special way to say that 'file.h' must be
generated before anything else is built. It's likely that a number
of source files depend on these header files, this provides a simple
way to make sure they are always generated even it the dependency data
hasn't been added to the build file yet.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add copyright to missing assembler files.
Add copyrights to missing test/* files.
Add copyrights
Various source and misc files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Trying to use normal perl conditions to conditionally 'use' a perl
module didn't quite work. Using the 'if' module to do so does work.
Reviewed-by: Andy Polyakov <appro@openssl.org>
As it turns out default glob's behaviour for quoted argument varies
from version to version, making it impossible to Configure or run
tests in some cases. The reason for quoting globs was to accommodate
source path with spaces in its name, which was treated by default glob
as multiple paths. File::Glob::glob on the other hand doesn't consider
spaces as delimiters and therefore works with unquoted patterns.
[Unfortunaltely File::Glob::glob, being too csh-ly, doesn't work
on VMS, hence the "pinning" is conditional.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
At earlier point 'which' was replaced with IPC::Cmd::can_run call.
Unfortunately on RPM-based systems it is a separate package and it's
not given that it's installed. Resurrected 'which' provides
poor-man fallback for IPC::Cmd::can_run.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
As it was until now, crypto-mdebug-backtrace was enabled by default
and only disabled if crypto-mdebug was disabled.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add Configure generated header files to $unified_info{generate}. This
makes sure the build files will pick them up with the rest for the
GENERATED macro, and thereby make sure they get cleaned away by 'make
clean'
Reviewed-by: Rich Salz <rsalz@openssl.org>
The buf-freelists option was removed in master. There may be some
things that try to disable it, so don't error out.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
