This option shows the certificates as sent by the server. It is not the
full verified chain.
Fixes#4933
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6067)
Document the fact that if a session is not closed down cleanly then the
session gets removed from the cache and marked as non-resumable.
Fixes#4720
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6053)
In 1.0.2 you could configure automatic ecdh params by using the
ECDHParameters config directive and setting it to the value
"+Automatic" or just "Automatic". This is no longer required in 1.1.0+
but we still recognise the "+Automatic" keyword for backwards compatibility.
However we did not recognise just "Automatic" without the leading "+" which
is equally valid. This commit fixes that omission.
Fixes#4113
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6035)
Actual behavior of DEFAULT is different than currently described.
Rather than actinf as cipher string, DEFAULT cannot be combined using
logical operators, etc.
Fixes#5420.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5428)
CLA: trivial
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5801)
Similar to 0652e8a7 ("Clarify default section in config.pod",
2018-04-12), reword a sentence to make it easier to parse.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5794)
Fixes#5961
This reverts commit 3c5a61dd0f.
The macros OPENSSL_MAKE_VERSION() and OPENSSL_VERSION_AT_LEAST() contain
errors and don't work as designed. Apart from that, their introduction
should be held back until a decision has been mad about the future
versioning scheme.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5968)
The scrypt and RSA-PSS documents were a mixture of section 3 and
section 7 material. With pre-1.1.1 OpenSSL, this is understandable,
since we had a different directory layout. With 1.1.1, we've moved to
the typical man-page directory layout, and the documents need to be
updated accordingly.
Also, the scrypt document contained a description of
EVP_PKEY_CTX_set1_pbe_pass(), which is a generic function rather than
an scrypt specific function, and therefore should be documented
separately.
Fixes#5802
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5942)
The documentation erroneously stated that one can change the default
configuration file name.
Fixes#5939
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5941)
This is a minor update which hopefully makes these particular lines
read a little easier.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5938)
The EVP_MD_CTX_cleanup() function was merged into EVP_MD_CTX_reset()
which is called by EVP_MD_CTX_free(). Adjust the documentation to say
that the latter should be used to avoid leaking memory.
CLA: trivial
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5921)
- added some explaining text to a sentence that lost its context.
- removed mention of per-ssl drbg
- fix whitespace errors
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5804)
Remove duplicate declaration of `EVP_CIPHER_key_length` in the synopsis.
CLA: trivial
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5792)
The RAND_DRBG API was added in PR #5462 and modified by PR #5547.
This commit adds the corresponding documention.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5461)
Add BIO_get_conn_ip_family and BIO_set_conn_ip_family macros to
util/private.num and document them in BIO_s_connect.pod.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/5007)
The BIO was refactored in 417be660e1,
but the manual wasn't fully updated to reflect some of the changes.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/5007)
When the "certificate purpose" is checked and KeyUsage extension is present,
either 'digitalSignature' or 'nonRepudiation' is accepted.
Manual page corrected to reflect the above.
Signed-off-by: Konstantin Shemyak <konstantin@shemyak.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5727)
Apparently applications rely on RAND_load_file's ability to work with
non-regular files, customarily with /dev/urandom, so that the ban was
not exactly appropriate.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5737)
In particular, x and y may be NULL, as used in ecdsa_ossl.c. Make use of
this in ecdh_ossl.c as well, to save an otherwise unnecessary temporary.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5532)
The comment in EVP_DigestInit.pod is:
> Returns the NID of the public key signing algorithm associated with this
digest. For example EVP_sha1() is associated with RSA so this will return
B<NID_sha1WithRSAEncryption>. Since digests and signature algorithms are no
longer linked this function is only retained for compatibility reasons.
I.e. there is no link anymore.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5682)
When SSL_CTX is created preinitialize it with system default
configuration from system_default section.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4848)
Since the public and private DRBG are per thread we don't need one
per ssl object anymore. It could also try to get entropy from a DRBG
that's really from an other thread because the SSL object moved to an
other thread.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5547)
Don't pass a pointer to uninitialized processed value
for BIO_CB_READ and BIO_CB_WRITE
Check the correct cmd code in BIO_callback_ctrl
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5516)
It is quite likely for there to be multiple certificates with empty
subjects, which are still distinct because of subjectAltName. Therefore
we allow multiple certificates with an empty Subject even if
unique_subject is set to yes.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5444)
Renamed to EVP_PKEY_new_raw_private_key()/EVP_new_raw_public_key() as per
feedback.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5520)
Include more information about how to create keys for these algorithms.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5520)
Also adds some documentation for related existing functions/macros
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5520)
These functions are similar to SSL_CTX_set_cookie_{generate,verify}_cb,
but used for the application-controlled portion of TLS1.3 stateless
handshake cookies rather than entire DTLSv1 cookies.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5463)
Adds application data into the encrypted session ticket
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3802)
X509_STORE_set_verify_cb_func.pod has documentation for various callbacks
and function pointers that can be set and retrieved, but neither it nor
X509_STORE_new has much documentation for the actual purpose and usage
of X509_STORE objects. Remedy this disparity with new documentation
for adding certificates and CRLs, expected usage, and for modifying
the default verifification behavior.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3958)
Remove a space from a whitespace-only line.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5575)
Add functions that will do the work of assigning certificate, privatekey
and chain certs to an SSL or SSL_CTX. If no privatekey is given, use the
publickey. This will permit the keys to pass validation for both ECDSA
and RSA. If a private key has already been set for the certificate, it
is discarded. A real private key can be set later.
This is an all-or-nothing setting of these parameters. Unlike the
SSL/SSL_CTX_use_certificate() and SSL/SSL_CTX_use_PrivateKey() functions,
the existing cert or privatekey is not modified (i.e. parameters copied).
This permits the existing cert/privatekey to be replaced.
It replaces the sequence of:
* SSL_use_certificate()
* SSL_use_privatekey()
* SSL_set1_chain()
And may actually be faster, as multiple checks are consolidated.
The private key can be NULL, if so an ENGINE module needs to contain the
actual private key that is to be used.
Note that ECDH (using the certificate's ECDSA key) ciphers do not work
without the private key being present, based on how the private key is
used in ECDH. ECDH does not offer PFS; ECDHE ciphers should be used instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/1130)
With "-multi" the OCSP responder forks multiple child processes,
and respawns them as needed. This can be used as a long-running
service, not just a demo program. Therefore the index file is
automatically re-read when changed. The responder also now optionally
times out client requests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Either files or directories of *.cnf or *.conf files
can be included.
Recursive inclusion of directories is not supported.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5351)
CLA: trivial
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5458)
When early data support was first added, this seemed like a good
idea, as it would allow applications to just add SSL_read_early_data()
calls as needed and have things "Just Work". However, for applications
that do not use TLS 1.3 early data, there is a negative side effect.
Having a nonzero max_early_data in a SSL_CTX (and thus, SSL objects
derived from it) means that when generating a session ticket,
tls_construct_stoc_early_data() will indicate to the client that
the server supports early data. This is true, in that the implementation
of TLS 1.3 (i.e., OpenSSL) does support early data, but does not
necessarily indicate that the server application supports early data,
when the default value is nonzero. In this case a well-intentioned
client would send early data along with its resumption attempt, which
would then be ignored by the server application, a waste of network
bandwidth.
Since, in order to successfully use TLS 1.3 early data, the application
must introduce calls to SSL_read_early_data(), it is not much additional
burden to require that the application also calls
SSL_{CTX_,}set_max_early_data() in order to enable the feature; doing
so closes this scenario where early data packets would be sent on
the wire but ignored.
Update SSL_read_early_data.pod accordingly, and make s_server and
our test programs into applications that are compliant with the new
requirements on applications that use early data.
Fixes#4725
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5483)
CLA: trivial
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5473)
This commit adds SSL_export_keying_material_early() which exports
keying material using early exporter master secret.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5252)
CLA: trivial
fix typo:
EC_point2buf => EC_POINT_point2buf
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5367)
Add -bind option to s_client application to allow specification of
local address for connection.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5272)
This function makes it easier to retrieve a reference to the
authority key identifier (akid->keyid) inside a certificate.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5271)
All contexts must be initialised because they can only be created using the _new() calls.
Remove the outdated mentions of uninitialised and initialised contexts.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/5388)
The description was probably copy&pasted from pkey.pod and forgotten.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5390)
The 'pp' function parameters of d2i_TYPE() and i2d_TYPE() are referenced
in the DESCRIPTION section as 'in' resp. 'out'. This commit renames the
references to 'ppin' resp. 'ppout' and adds an explaining sentence.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5365)
added macro to create version number
use the macro to build OPENSSL_VERSION_AT_LEAST(maj,min,fix) so that
customers of libssl (such as ruby-openssl) do not need to be so aware of
openssl version numbers.
includes updates to ssl(7) and OPENSSL_VERSION_NUMBER(3) man page
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5212)
Add SSL_verify_client_post_handshake() for servers to initiate PHA
Add SSL_force_post_handshake_auth() for clients that don't have certificates
initially configured, but use a certificate callback.
Update SSL_CTX_set_verify()/SSL_set_verify() mode:
* Add SSL_VERIFY_POST_HANDSHAKE to postpone client authentication until after
the initial handshake.
* Update SSL_VERIFY_CLIENT_ONCE now only sends out one CertRequest regardless
of when the certificate authentication takes place; either initial handshake,
re-negotiation, or post-handshake authentication.
Add 'RequestPostHandshake' and 'RequirePostHandshake' SSL_CONF options that
add the SSL_VERIFY_POST_HANDSHAKE to the 'Request' and 'Require' options
Add support to s_client:
* Enabled automatically when cert is configured
* Can be forced enabled via -force_pha
Add support to s_server:
* Use 'c' to invoke PHA in s_server
* Remove some dead code
Update documentation
Update unit tests:
* Illegal use of PHA extension
* TLSv1.3 certificate tests
DTLS and TLS behave ever-so-slightly differently. So, when DTLS1.3 is
implemented, it's PHA support state machine may need to be different.
Add a TODO and a #error
Update handshake context to deal with PHA.
The handshake context for TLSv1.3 post-handshake auth is up through the
ClientFinish message, plus the CertificateRequest message. Subsequent
Certificate, CertificateVerify, and Finish messages are based on this
handshake context (not the Certificate message per se, but it's included
after the hash). KeyUpdate, NewSessionTicket, and prior Certificate
Request messages are not included in post-handshake authentication.
After the ClientFinished message is processed, save off the digest state
for future post-handshake authentication. When post-handshake auth occurs,
copy over the saved handshake context into the "main" handshake digest.
This effectively discards the any KeyUpdate or NewSessionTicket messages
and any prior post-handshake authentication.
This, of course, assumes that the ID-22 did not mean to include any
previous post-handshake authentication into the new handshake transcript.
This is implied by section 4.4.1 that lists messages only up to the
first ClientFinished.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4964)
Make the sigalg name in comments reflect one that actually exists
in the draft standard.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5174)
These functions can now take both "sig+hash" strings and
algorithm-specific identifiers like "rsa_pss_pss_sha256" that
indicate a particular entry from the TLS signature algorithm
registry.
Also clarify that only the "_list" form allows for the new-style names
(the non-"list" interfaces take sig and hasn NIDs, which cannot
access all of the new-style schemes).
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5068)
Correct error return value in OCSP_basic_sign().
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4190)
Support added for these two digests, available only via the EVP interface.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5093)
Note the reasons, including streaming output issues and key/iv/nonce
management issues.
Recommend the use of cms(1) instead.
Fixes#471.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/5048)
Because the related PR/commits are merged in 2018...
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4976)
To avoid check failure, make dummy RETURN VALUES sections in the docs
which have no real functions decribed inside...
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4976)
All missing sections are added.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4976)
The data argument of SSL_dane_tlsa_add is used read-only, so it
should be const.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5056)
In man1/engine.pod and man3/ENGINE_add.pod
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4956)
The changes are analogous to the ones made in commit 0bf340e135
to x509.pod, see PR #4924.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/5012)
Now that we attempt to send early data in the first TCP packet along with
the ClientHello, the documentation for SSL_write_early_data() needed a
tweak.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4802)
The idea is to be able to add extension value lines directly on the
command line instead of through the config file, for example:
openssl req -new -extension 'subjectAltName = DNS:dom.ain, DNS:oth.er' \
-extension 'certificatePolicies = 1.2.3.4'
Fixes#3311
Thank you Jacob Hoffman-Andrews for the inspiration
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4986)
This commit is a suggestion to hopefully improve x509.pod. I had to
re-read it the first time through and with these changes it reads a
little easier, and wondering if others agree.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4924)
This commit contains suggestion that (hopefully) improve the
documentation in ssl.pod.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4914)
As per documentation, the RSA keys should not be smaller than 64bit (the
documentation mentions something about a quirk in the prime generation
algorithm). I am adding check into the code which used to be 16 for some
reason.
My primary motivation is to get rid of the last sentence in the
documentation which suggest that typical keys have 1024 bits (instead
updating it to the now default 2048).
I *assume* that keys less than the 2048 bits (say 512) are used for
education purposes.
The 512 bits as the minimum have been suggested by Bernd Edlinger.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4547)
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4843)
Add speed tool options to run cipher, digest and rand benchmarks for a
single buffer size specified by -bytes over a time interval specified
by -seconds.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4834)
IFF the client has ChaCha first, and server cipher priority is used,
and the new SSL_OP_PRIORITIZE_CHACHA_FOR_MOBILE option is used,
then reprioritize ChaCha above everything else. This way, A matching
ChaCha cipher will be selected if there is a match. If no ChaCha ciphers
match, then the other ciphers are used.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4436)
One had some lines copied from the other, and both were missing a
proper RETURN VALUES section.
Fixes#4781
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4787)
* Introduce RSA_generate_multi_prime_key to generate multi-prime
RSA private key. As well as the following functions:
RSA_get_multi_prime_extra_count
RSA_get0_multi_prime_factors
RSA_get0_multi_prime_crt_params
RSA_set0_multi_prime_params
RSA_get_version
* Support EVP operations for multi-prime RSA
* Support ASN.1 operations for multi-prime RSA
* Support multi-prime check in RSA_check_key_ex
* Support multi-prime RSA in apps/genrsa and apps/speed
* Support multi-prime RSA manipulation functions
* Test cases and documentation are added
* CHANGES is updated
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4241)
EVP_PKEY_public_check() and EVP_PKEY_param_check()
Doc and test cases are added
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4647)
Add a new function OCSP_resp_get0_signer() that looks in the
certs bundled with the response as well as in additional certificates
provided as a function argument, returning the certificate that signed
the given response (if present).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4573)
SM3 is a secure hash function which is part of the Chinese
"Commercial Cryptography" suite of algorithms which use is
required for certain commercial applications in China.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4616)
* ARIA, SEED, Camellia
* AES-XTS, OCB, CTR
* Key wrap for 3DES, AES
* RC4-MD5 AD
* CFB modes with 1-bit and 8-bit shifts
Split EVP_EncryptInit cipher list to individual man pages.
Consolidate cipher bit-lengths in EVP_EncryptInit cipher list.
Clarify
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4564)
Only the 'new' variant of sk_TYPE_new_reserve() deals with
compression functions.
Mention both new 'reserve' APIs as being added in OpenSSL 1.1.1.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4591)
<compar> to <compare> to match the var name in function prototype
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4559)
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4559)
This is a combination of sk_new and sk_reserve, to make it more
convenient to allocate a new stack with reserved memory and comaprison
function (if any).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4559)
Add openssl-foo as a name for the openssl "foo" command.
Addresses an issue found by a usability study to be published.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4553)
Reseeding is handled very differently by the classic RAND_METHOD API
and the new RAND_DRBG api. These differences led to some problems when
the new RAND_DRBG was made the default OpenSSL RNG. In particular,
RAND_add() did not work as expected anymore. These issues are discussed
on the thread '[openssl-dev] Plea for a new public OpenSSL RNG API'
and in Pull Request #4328. This commit fixes the mentioned issues,
introducing the following changes:
- Replace the fixed size RAND_BYTES_BUFFER by a new RAND_POOL API which
facilitates collecting entropy by the get_entropy() callback.
- Don't use RAND_poll()/RAND_add() for collecting entropy from the
get_entropy() callback anymore. Instead, replace RAND_poll() by
RAND_POOL_acquire_entropy().
- Add a new function rand_drbg_restart() which tries to get the DRBG
in an instantiated state by all means, regardless of the current
state (uninstantiated, error, ...) the DRBG is in. If the caller
provides entropy or additional input, it will be used for reseeding.
- Restore the original documented behaviour of RAND_add() and RAND_poll()
(namely to reseed the DRBG immediately) by a new implementation based
on rand_drbg_restart().
- Add automatic error recovery from temporary failures of the entropy
source to RAND_DRBG_generate() using the rand_drbg_restart() function.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4328)
And also make '-xmpphost' an alias of the '-name' option.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4524)
Use atomic operations for the counters
Rename malloc_lock to memdbg_lock
Also fix some style errors in mem_dbg.c
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4359)
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4481)
indicate the level of locking required for various operations.
Remove the lock and atomics from the lhash code. These we're not complete
or adequate.
Refer to #4418 and #4427 for details.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4429)
See crypto/objects/objects.txt:767 -- field is "issuerAltName"
CLA: trivial
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4460)
BN_new() and BN_secure_new() not only allocate memory, but also
initialise it to deterministic value - 0.
Document that behaviour to make it explicit
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4438)
Remove all stack headers from some includes that don't use them.
Avoid a genearic untyped stack use.
Update stack POD file to include the OPENSSL_sk_ API functions in the notes
section. They were mentioned in the name section but not defined anywhere.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4430)
This allows the caller to guarantee that there is sufficient space for a
number of insertions without reallocation.
The expansion ratio when reallocating the array is reduced to 1.5 rather than 2.
Change bounds testing to use a single size rather than both INT_MAX and
SIZE_MAX. This simplifies some of the tests.
Switch the stack pointers to data from char * to void *
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4386)
The pub_key field for DH isn't actually used in DH_compute_key at all.
(Note the peer public key is passed in as as BIGNUM.) It's mostly there
so the caller may extract it from DH_generate_key. It doesn't
particularly need to be present if filling in a DH from external
parameters.
The check in DH_set0_key conflicts with adding OpenSSL 1.1.0 to Node.
Their public API is a thin wrapper over the old OpenSSL one:
https://nodejs.org/api/crypto.html#crypto_class_diffiehellman
They have separate setPrivateKey and setPublicKey methods, so the public
key may be set last or not at all. In 1.0.2, either worked fine since
operations on DH objects generally didn't use the public key. (Like
with OpenSSL, Node's setPublicKey method is also largely a no-op, but so
it goes.) In 1.1.0, DH_set0_key prevents create a private-key-only DH
object.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4384)
OpenSSL 1.1.0 made SSL_CTX and SSL structs opaque and introduced a new
API to set the minimum and maximum protocol version for SSL_CTX with
TLS_method(). Add getters to introspect the configured versions:
int SSL_CTX_get_min_proto_version(SSL_CTX *ctx);
int SSL_CTX_get_max_proto_version(SSL_CTX *ctx);
int SSL_get_min_proto_version(SSL *ssl);
int SSL_get_max_proto_version(SSL *ssl);
NOTE: The getters do not resolv the version in case when the minimum or
maxium version are configured as '0' (meaning auto-select lowest and
highst version number).
Signed-off-by: Christian Heimes <christian@python.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4364)
[to be squashed]
[skip ci]
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4356)
A new method is added to EVP_PKEY_METH as:
int (*check) (EVP_PKEY_CTX *ctx);
and to EVP_PKEY_ASN1_METHOD as:
int (*pkey_check) (EVP_PKEY_CTX *ctx);
This is used to check the validity of a specific key.
The order of calls is:
EVP_PKEY_check -> pmeth.check -> ameth.pkey_check.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4337)
It is otherwise unclear what all the magic numbers mean.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4349)
"Early callback" is a little ambiguous now that early data exists.
Perhaps "ClientHello callback"?
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4349)
This allows completely arbitrary passphrases to be entered, including
NUL bytes.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3821)
It is talked around but not explicitly stated in one part of the
documentation that you should put library configuration lines at the
start of the configuration file.
CLA: trivial
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3959)
Deprecated functions are still documented.
Put HISTORY after SEE ALSO; add HISTORY to BN_zero
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3746)
This function is really emulating what would happen in client mode,
and does not necessarily reflect what is usable for a server SSL.
Make this a bit more explicit, and do some wordsmithing while here.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4284)
