Move the dh_st structure into an internal header file and provide
relevant accessors for the internal fields.
Reviewed-by: Richard Levitte <levitte@openssl.org>
* Clear proposed, along with selected, before looking at ClientHello
* Add test case for above
* Clear NPN seen after selecting ALPN on server
* Minor documentation updates
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If a call to EVP_DecryptUpdate fails then a memory leak could occur.
Ensure that the memory is freed appropriately.
Issue reported by Guido Vranken.
Reviewed-by: Richard Levitte <levitte@openssl.org>
* Perform ALPN after the SNI callback; the SSL_CTX may change due to
that processing
* Add flags to indicate that we actually sent ALPN, to properly error
out if unexpectedly received.
* clean up ssl3_free() no need to explicitly clear when doing memset
* document ALPN functions
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Disabled by default, but can be enabled by setting the
ct_validation_callback on a SSL or SSL_CTX.
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Change the ECC default curve list to be this, in order: x25519, secp256r1,
secp521r1, secp384r1, brainpoolP256r1, brainpoolP384r1, and brainpool512r1.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
1) Simplify code with better PACKET methods.
2) Make broken SNI parsing explicit. SNI was intended to be extensible
to new name types but RFC 4366 defined the syntax inextensibly, and
OpenSSL has never parsed SNI in a way that would allow adding a new name
type. RFC 6066 fixed the definition but due to broken implementations
being widespread, it appears impossible to ever extend SNI.
3) Annotate resumption behaviour. OpenSSL doesn't currently handle all
extensions correctly upon resumption. Annotate for further clean-up.
4) Send an alert on ALPN protocol mismatch.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Add X25519 to TLS supported curve list.
Reject attempts to configure keys which cannot be used
for signing.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Adapted from BoringSSL. Added a test.
The extension parsing code is already attempting to already handle this for
some individual extensions, but it is doing so inconsistently. Duplicate
efforts in individual extension parsing will be cleaned up in a follow-up.
Reviewed-by: Stephen Henson <steve@openssl.org>
Add -DBIO_DEBUG to --strict-warnings.
Remove comments about outdated debugging ifdef guards.
Remove md_rand ifdef guarding an assert; it doesn't seem used.
Remove the conf guards in conf_api since we use OPENSSL_assert, not assert.
For pkcs12 stuff put OPENSSL_ in front of the macro name.
Merge TLS_DEBUG into SSL_DEBUG.
Various things just turned on/off asserts, mainly for checking non-NULL
arguments, which is now removed: camellia, bn_ctx, crypto/modes.
Remove some old debug code, that basically just printed things to stderr:
DEBUG_PRINT_UNKNOWN_CIPHERSUITES, DEBUG_ZLIB, OPENSSL_RI_DEBUG,
RL_DEBUG, RSA_DEBUG, SCRYPT_DEBUG.
Remove OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Certain code paths in tls_decrypt_ticket could return early without first
freeing the HMAC_CTX or the EVP_CIPHER_CTX.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Remove support for static ECDH ciphersuites. They require ECDH keys
in certificates and don't support forward secrecy.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
To enable heartbeats for DTLS, configure with enable-heartbeats.
Heartbeats for TLS have been completely removed.
This addresses RT 3647
Reviewed-by: Richard Levitte <levitte@openssl.org>
PACKET contents should be read-only. To achieve this, also
- constify two user callbacks
- constify BUF_reverse.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The protocol selection code is now consolidated in a few consecutive
short functions in a single file and is table driven. Protocol-specific
constraints that influence negotiation are moved into the flags
field of the method structure. The same protocol version constraints
are now applied in all code paths. It is now much easier to add
new protocol versions without reworking the protocol selection
logic.
In the presence of "holes" in the list of enabled client protocols
we no longer select client protocols below the hole based on a
subset of the constraints and then fail shortly after when it is
found that these don't meet the remaining constraints (suiteb, FIPS,
security level, ...). Ideally, with the new min/max controls users
will be less likely to create "holes" in the first place.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
If DSA parameters are absent return -1 (for unknown) in DSA_security_bits.
If parameters are absent when a certificate is set in an SSL/SSL_CTX
structure this will reject the certificate by default. This will cause DSA
certificates which omit parameters to be rejected but that is never (?)
done in practice.
Thanks to Brian 'geeknik' Carpenter for reporting this issue.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Move all calls of the OCSP callback into one place, rather than repeating it
in two different places.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
It makes no sense to call the OCSP status callback if we are resuming a
session because no certificates will be sent.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
If a server sends the status_request extension then it may choose
to send the CertificateStatus message. However this is optional.
We were treating it as mandatory and the connection was failing.
Thanks to BoringSSL for reporting this issue.
RT#4120
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
Add #define's for the old names.
Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros.
Reviewed-by: Tim Hudson <tjh@openssl.org>
If the call to OBJ_find_sigid_by_algs fails to find the relevant NID then
we should set the NID to NID_undef.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add new flag TLS1_FLAGS_RECEIVED_EXTMS which is set when the peer sends
the extended master secret extension.
Server now sends extms if and only if the client sent extms.
Check consistency of extms extension when resuming sessions following (where
practical) RFC7627.
Reviewed-by: Matt Caswell <matt@openssl.org>
This change required some special treatment, as HMAC is intertwined
with EVP_MD. For now, all local HMAC_CTX variables MUST be
initialised with HMAC_CTX_EMPTY, or whatever happens to be on the
stack will be mistaken for actual pointers to EVP_MD_CTX. This will
change as soon as HMAC_CTX becomes opaque.
Also, since HMAC_CTX_init() can fail now, its return type changes from
void to int, and it will return 0 on failure, 1 on success.
Reviewed-by: Rich Salz <rsalz@openssl.org>
SSL_{CTX}_set_tmp_ecdh() allows to set 1 EC curve and then tries to use it. On
the other hand SSL_{CTX_}set1_curves() allows you to set a list of curves, but
only when SSL_{CTX_}set_ecdh_auto() was called to turn it on.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
This only gets used to set a specific curve without actually checking that the
peer supports it or not and can therefor result in handshake failures that can
be avoided by selecting a different cipher.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Don't hard code EVP_sha* etc for signature algorithms: use table
indices instead. Add SHA224 and SHA512 to tables.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
This patch contains the necessary changes to provide GOST 2012
ciphersuites in TLS. It requires the use of an external GOST 2012 engine.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
There are lots of calls to EVP functions from within libssl There were
various places where we should probably check the return value but don't.
This adds these checks.
Reviewed-by: Richard Levitte <levitte@openssl.org>
