Fixes#23400
The 3.1 FIPS provider no longer writes out the 'status indicator' by
default due to changes related to FIPS 140-3 requirements. For Backwards
compatability if the fipsinstall detects it is loading a 3.0.X FIPS
provider then it will save the 'status indicator' by default.
Disclaimer: Using a fipsinstall command line utility that is not supplied
with the FIPS provider tarball source is not recommended.
This PR deliberately does not attempt to exclude any additional options
that were added after 3.0.X. These additional options will be ignored by older
providers.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Hugo Landau <hlandau@devever.net>
(Merged from https://github.com/openssl/openssl/pull/23689)
Similar to other KDFs, the input key should be 112 bits long.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25529)
The options in fipsprov.c are now generated using macros with fips_indicator_params.inc.
This should keep the naming consistent.
Some FIPS related headers have moved to providers/fips/include so that
they can use fips_indicator_params.inc.
securitycheck.h now includes fipsindicator.h, and fipsindicator.h includes
fipscommon.h.
fipsinstall.c uses OSSL_PROV_PARAM_ for the configurable FIPS options rather than
using OSSL_PROV_FIPS_PARAM_* as this was confusing as to which one should be used.
fips_names.h just uses aliases now for existing public names.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25162)
This adds a FIPS indicator for KMAC key size.
Note that 112 bits keys are still smaller than the
sizes required to reach 128 bits for KMAC128 and
256 bits for KMAC256
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/25049)
HMAC has been changed to use a FIPS indicator for its key check.
HKDF and Single Step use a salt rather than a key when using HMAC,
so we need a mechanism to bypass this check in HMAC.
A seperate 'internal' query table has been added to the FIPS provider
for MACS. Giving HMAC a seprate dispatch table allows KDF's to ignore
the key check. If a KDF requires the key check then it must do the
check itself. The normal MAC dipatch table is used if the user fetches
HMAC directly.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/25049)
FIPS KAS requires use of ECC CDH.
The EC 'B' and 'K' curves have a cofactor that is not 1, and this
MUST be multiplied by the private key when deriving the shared secret.
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25139)
FIPS doesn't permit message hashes to be processed by thee algorithms.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/25032)
Since FIPS provider performs lower bound check by default from v3.0, the
default value for new configurable item will be one.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24120)
In FIPS 140-3, RSA Signing with X9.31 padding is not approved,
but verification is allowed for legacy purposes. An indicator has been added
for RSA signing with X9.31 padding.
A strict restriction on the size of the RSA modulus has been added
i.e. It must be 1024 + 256 * s (which is part of the ANSI X9.31 spec).
Added implementation comments to the X9.31 padding code
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/24021)
This leaves 3DES with the FIPS query "FIPS=yes", which allows
Triple-DES to be used for Decryption by default.
Disallow CMAC using Triple-DES in FIPS.
This does not use a FIPS indicator.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/24960)
This is a FIPS 140-3 requirement.
This uses a FIP indicator if either the FIPS configurable "dsa_sign_disabled" is set to 0,
OR OSSL_SIGNATURE_PARAM_FIPS_SIGN_CHECK is set to 0 in the dsa signing context.
Reviewed-by: Neil Horman <nhorman@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24799)
This change makes the message on failure consistent with the message on
success by trimming a single space in the error message.
CLA: trivial
Signed-off-by: Enji Cooper <yaneurabeya@gmail.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/24180)
This adds a -pedantic option to fipsinstall that adjusts the various
settings to ensure strict FIPS compliance rather than backwards
compatibility.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20752)
This option runs the self tests at installation time. It fails for the 3.1
module.
Also changed the default behaviour to that set by the -self_test_onload
option.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/19510)
If -out is not specified, send output to stdout.
Fix documentation errors.
Remove "-out -" from an invocation.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14623)
The actual output of the 'fipsinstall' is the config file it outputs.
It should be possible to output that to standard output, and diverse
notification messages shouldn't be mixed in. Therefore, we output
them to standard error instead.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14320)
Make sure all commands check to see if there are any "extra" arguments
after the options, and print an error if so.
Made all error messages consistent (which is to say, minimal).
Fixes: #13527
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/13563)
Many of the new types introduced by OpenSSL 3.0 have an OSSL_ prefix,
e.g., OSSL_CALLBACK, OSSL_PARAM, OSSL_ALGORITHM, OSSL_SERIALIZER.
The OPENSSL_CTX type stands out a little by using a different prefix.
For consistency reasons, this type is renamed to OSSL_LIB_CTX.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
If a path is specified with the -module option it will use this path to load the library when the provider is activated,
instead of also having to set the environment variable OPENSSL_MODULES.
Added a platform specific opt_path_end() function that uses existing functionality used by opt_progname().
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/12761)
As the ERR_raise() is setup at this point returng a range of negative values for errors is not required.
This will need to be revisited if the code ever moves to running from the DEP.
Added a -config option to the fips install so that it can test if a fips module is loadable from configuration.
(The -verify option only uses the generated config, whereas -config uses the normal way of including the generated data via another config file).
Added more failure tests for the raised errors.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12346)
The commit claimed to make things more consistent. In fact it makes it
less so. Revert back to the previous namig convention.
This reverts commit d9c2fd51e2.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12186)
Change default FIPS HMAC KEY from all-zero's
Use default FIPSKEY if not given on command line.
Make all -macopt in fipsinstall optional
Make all tests, except fipsinstall, use the default -macopt and
-mac_name flags.
Define and use FIPSDIR variable on VMS/MMS.
Also use SRCDIR/BLDDIR in SRCTOP/BLDTOP.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12235)
functions are now EVP_MAC functions, usually with ctx in their names.
Before 3.0 is released, the names are mutable and this prevents more
inconsistencies being introduced.
There are no functional or code changes.
Just the renaming and a little reformatting.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11997)
