openssl/CHANGES

12471 lines
530 KiB
Plaintext
Raw Normal View History

1998-12-23 15:38:54 +08:00
OpenSSL CHANGES
_______________
Changes between 1.1.0e and 1.1.1 [xx XXX xxxx]
*) Add support for SipHash
[Todd Short]
*) OpenSSL now fails if it receives an unrecognised record type in TLS1.0
or TLS1.1. Previously this only happened in SSLv3 and TLS1.2. This is to
prevent issues where no progress is being made and the peer continually
sends unrecognised record types, using up resources processing them.
[Matt Caswell]
*) 'openssl passwd' can now produce SHA256 and SHA512 based output,
using the algorithm defined in
https://www.akkadia.org/drepper/SHA-crypt.txt
[Richard Levitte]
*) Heartbeat support has been removed; the ABI is changed for now.
[Richard Levitte, Rich Salz]
*) Support for SSL_OP_NO_ENCRYPT_THEN_MAC in SSL_CONF_cmd.
[Emilia Käsper]
Changes between 1.1.0d and 1.1.0e [16 Feb 2017]
*) Encrypt-Then-Mac renegotiation crash
During a renegotiation handshake if the Encrypt-Then-Mac extension is
negotiated where it was not in the original handshake (or vice-versa) then
this can cause OpenSSL to crash (dependant on ciphersuite). Both clients
and servers are affected.
This issue was reported to OpenSSL by Joe Orton (Red Hat).
(CVE-2017-3733)
[Matt Caswell]
Changes between 1.1.0c and 1.1.0d [26 Jan 2017]
*) Truncated packet could crash via OOB read
If one side of an SSL/TLS path is running on a 32-bit host and a specific
cipher is being used, then a truncated packet can cause that host to
perform an out-of-bounds read, usually resulting in a crash.
This issue was reported to OpenSSL by Robert Święcki of Google.
(CVE-2017-3731)
[Andy Polyakov]
*) Bad (EC)DHE parameters cause a client crash
If a malicious server supplies bad parameters for a DHE or ECDHE key
exchange then this can result in the client attempting to dereference a
NULL pointer leading to a client crash. This could be exploited in a Denial
of Service attack.
This issue was reported to OpenSSL by Guido Vranken.
(CVE-2017-3730)
[Matt Caswell]
*) BN_mod_exp may produce incorrect results on x86_64
There is a carry propagating bug in the x86_64 Montgomery squaring
procedure. No EC algorithms are affected. Analysis suggests that attacks
against RSA and DSA as a result of this defect would be very difficult to
perform and are not believed likely. Attacks against DH are considered just
feasible (although very difficult) because most of the work necessary to
deduce information about a private key may be performed offline. The amount
of resources required for such an attack would be very significant and
likely only accessible to a limited number of attackers. An attacker would
additionally need online access to an unpatched system using the target
private key in a scenario with persistent DH parameters and a private
key that is shared between multiple clients. For example this can occur by
default in OpenSSL DHE based SSL/TLS ciphersuites. Note: This issue is very
similar to CVE-2015-3193 but must be treated as a separate problem.
This issue was reported to OpenSSL by the OSS-Fuzz project.
(CVE-2017-3732)
[Andy Polyakov]
Changes between 1.1.0b and 1.1.0c [10 Nov 2016]
*) ChaCha20/Poly1305 heap-buffer-overflow
TLS connections using *-CHACHA20-POLY1305 ciphersuites are susceptible to
a DoS attack by corrupting larger payloads. This can result in an OpenSSL
crash. This issue is not considered to be exploitable beyond a DoS.
This issue was reported to OpenSSL by Robert Święcki (Google Security Team)
(CVE-2016-7054)
[Richard Levitte]
*) CMS Null dereference
Applications parsing invalid CMS structures can crash with a NULL pointer
dereference. This is caused by a bug in the handling of the ASN.1 CHOICE
type in OpenSSL 1.1.0 which can result in a NULL value being passed to the
structure callback if an attempt is made to free certain invalid encodings.
Only CHOICE structures using a callback which do not handle NULL value are
affected.
This issue was reported to OpenSSL by Tyler Nighswander of ForAllSecure.
(CVE-2016-7053)
[Stephen Henson]
*) Montgomery multiplication may produce incorrect results
There is a carry propagating bug in the Broadwell-specific Montgomery
multiplication procedure that handles input lengths divisible by, but
longer than 256 bits. Analysis suggests that attacks against RSA, DSA
and DH private keys are impossible. This is because the subroutine in
question is not used in operations with the private key itself and an input
of the attacker's direct choice. Otherwise the bug can manifest itself as
transient authentication and key negotiation failures or reproducible
erroneous outcome of public-key operations with specially crafted input.
Among EC algorithms only Brainpool P-512 curves are affected and one
presumably can attack ECDH key negotiation. Impact was not analyzed in
detail, because pre-requisites for attack are considered unlikely. Namely
multiple clients have to choose the curve in question and the server has to
share the private key among them, neither of which is default behaviour.
Even then only clients that chose the curve will be affected.
This issue was publicly reported as transient failures and was not
initially recognized as a security issue. Thanks to Richard Morgan for
providing reproducible case.
(CVE-2016-7055)
[Andy Polyakov]
*) Removed automatic addition of RPATH in shared libraries and executables,
as this was a remainder from OpenSSL 1.0.x and isn't needed any more.
[Richard Levitte]
Changes between 1.1.0a and 1.1.0b [26 Sep 2016]
*) Fix Use After Free for large message sizes
The patch applied to address CVE-2016-6307 resulted in an issue where if a
message larger than approx 16k is received then the underlying buffer to
store the incoming message is reallocated and moved. Unfortunately a
dangling pointer to the old location is left which results in an attempt to
write to the previously freed location. This is likely to result in a
crash, however it could potentially lead to execution of arbitrary code.
This issue only affects OpenSSL 1.1.0a.
This issue was reported to OpenSSL by Robert Święcki.
(CVE-2016-6309)
[Matt Caswell]
Changes between 1.1.0 and 1.1.0a [22 Sep 2016]
*) OCSP Status Request extension unbounded memory growth
A malicious client can send an excessively large OCSP Status Request
extension. If that client continually requests renegotiation, sending a
large OCSP Status Request extension each time, then there will be unbounded
memory growth on the server. This will eventually lead to a Denial Of
Service attack through memory exhaustion. Servers with a default
configuration are vulnerable even if they do not support OCSP. Builds using
the "no-ocsp" build time option are not affected.
This issue was reported to OpenSSL by Shi Lei (Gear Team, Qihoo 360 Inc.)
(CVE-2016-6304)
[Matt Caswell]
*) SSL_peek() hang on empty record
OpenSSL 1.1.0 SSL/TLS will hang during a call to SSL_peek() if the peer
sends an empty record. This could be exploited by a malicious peer in a
Denial Of Service attack.
This issue was reported to OpenSSL by Alex Gaynor.
(CVE-2016-6305)
[Matt Caswell]
*) Excessive allocation of memory in tls_get_message_header() and
dtls1_preprocess_fragment()
A (D)TLS message includes 3 bytes for its length in the header for the
message. This would allow for messages up to 16Mb in length. Messages of
this length are excessive and OpenSSL includes a check to ensure that a
peer is sending reasonably sized messages in order to avoid too much memory
being consumed to service a connection. A flaw in the logic of version
1.1.0 means that memory for the message is allocated too early, prior to
the excessive message length check. Due to way memory is allocated in
OpenSSL this could mean an attacker could force up to 21Mb to be allocated
to service a connection. This could lead to a Denial of Service through
memory exhaustion. However, the excessive message length check still takes
place, and this would cause the connection to immediately fail. Assuming
that the application calls SSL_free() on the failed conneciton in a timely
manner then the 21Mb of allocated memory will then be immediately freed
again. Therefore the excessive memory allocation will be transitory in
nature. This then means that there is only a security impact if:
1) The application does not call SSL_free() in a timely manner in the event
that the connection fails
or
2) The application is working in a constrained environment where there is
very little free memory
or
3) The attacker initiates multiple connection attempts such that there are
multiple connections in a state where memory has been allocated for the
connection; SSL_free() has not yet been called; and there is insufficient
memory to service the multiple requests.
Except in the instance of (1) above any Denial Of Service is likely to be
transitory because as soon as the connection fails the memory is
subsequently freed again in the SSL_free() call. However there is an
increased risk during this period of application crashes due to the lack of
memory - which would then mean a more serious Denial of Service.
This issue was reported to OpenSSL by Shi Lei (Gear Team, Qihoo 360 Inc.)
(CVE-2016-6307 and CVE-2016-6308)
[Matt Caswell]
*) solaris-x86-cc, i.e. 32-bit configuration with vendor compiler,
had to be removed. Primary reason is that vendor assembler can't
assemble our modules with -KPIC flag. As result it, assembly
support, was not even available as option. But its lack means
lack of side-channel resistant code, which is incompatible with
security by todays standards. Fortunately gcc is readily available
prepackaged option, which we firmly point at...
[Andy Polyakov]
Changes between 1.0.2h and 1.1.0 [25 Aug 2016]
*) Windows command-line tool supports UTF-8 opt-in option for arguments
and console input. Setting OPENSSL_WIN32_UTF8 environment variable
(to any value) allows Windows user to access PKCS#12 file generated
with Windows CryptoAPI and protected with non-ASCII password, as well
as files generated under UTF-8 locale on Linux also protected with
non-ASCII password.
[Andy Polyakov]
*) To mitigate the SWEET32 attack (CVE-2016-2183), 3DES cipher suites
have been disabled by default and removed from DEFAULT, just like RC4.
See the RC4 item below to re-enable both.
[Rich Salz]
*) The method for finding the storage location for the Windows RAND seed file
has changed. First we check %RANDFILE%. If that is not set then we check
the directories %HOME%, %USERPROFILE% and %SYSTEMROOT% in that order. If
all else fails we fall back to C:\.
[Matt Caswell]
*) The EVP_EncryptUpdate() function has had its return type changed from void
to int. A return of 0 indicates and error while a return of 1 indicates
success.
[Matt Caswell]
*) The flags RSA_FLAG_NO_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME and
DH_FLAG_NO_EXP_CONSTTIME which previously provided the ability to switch
off the constant time implementation for RSA, DSA and DH have been made
no-ops and deprecated.
[Matt Caswell]
*) Windows RAND implementation was simplified to only get entropy by
calling CryptGenRandom(). Various other RAND-related tickets
were also closed.
[Joseph Wylie Yandle, Rich Salz]
*) The stack and lhash API's were renamed to start with OPENSSL_SK_
and OPENSSL_LH_, respectively. The old names are available
with API compatibility. They new names are now completely documented.
[Rich Salz]
*) Unify TYPE_up_ref(obj) methods signature.
SSL_CTX_up_ref(), SSL_up_ref(), X509_up_ref(), EVP_PKEY_up_ref(),
X509_CRL_up_ref(), X509_OBJECT_up_ref_count() methods are now returning an
int (instead of void) like all others TYPE_up_ref() methods.
So now these methods also check the return value of CRYPTO_atomic_add(),
and the validity of object reference counter.
[fdasilvayy@gmail.com]
*) With Windows Visual Studio builds, the .pdb files are installed
alongside the installed libraries and executables. For a static
library installation, ossl_static.pdb is the associate compiler
generated .pdb file to be used when linking programs.
[Richard Levitte]
*) Remove openssl.spec. Packaging files belong with the packagers.
[Richard Levitte]
*) Automatic Darwin/OSX configuration has had a refresh, it will now
recognise x86_64 architectures automatically. You can still decide
to build for a different bitness with the environment variable
KERNEL_BITS (can be 32 or 64), for example:
KERNEL_BITS=32 ./config
[Richard Levitte]
*) Change default algorithms in pkcs8 utility to use PKCS#5 v2.0,
256 bit AES and HMAC with SHA256.
[Steve Henson]
*) Remove support for MIPS o32 ABI on IRIX (and IRIX only).
[Andy Polyakov]
*) Triple-DES ciphers have been moved from HIGH to MEDIUM.
[Rich Salz]
*) To enable users to have their own config files and build file templates,
Configure looks in the directory indicated by the environment variable
OPENSSL_LOCAL_CONFIG_DIR as well as the in-source Configurations/
directory. On VMS, OPENSSL_LOCAL_CONFIG_DIR is expected to be a logical
name and is used as is.
[Richard Levitte]
*) The following datatypes were made opaque: X509_OBJECT, X509_STORE_CTX,
X509_STORE, X509_LOOKUP, and X509_LOOKUP_METHOD. The unused type
X509_CERT_FILE_CTX was removed.
[Rich Salz]
*) "shared" builds are now the default. To create only static libraries use
the "no-shared" Configure option.
[Matt Caswell]
*) Remove the no-aes, no-hmac, no-rsa, no-sha and no-md5 Configure options.
All of these option have not worked for some while and are fundamental
algorithms.
[Matt Caswell]
*) Make various cleanup routines no-ops and mark them as deprecated. Most
global cleanup functions are no longer required because they are handled
via auto-deinit (see OPENSSL_init_crypto and OPENSSL_init_ssl man pages).
Explicitly de-initing can cause problems (e.g. where a library that uses
OpenSSL de-inits, but an application is still using it). The affected
functions are CONF_modules_free(), ENGINE_cleanup(), OBJ_cleanup(),
EVP_cleanup(), BIO_sock_cleanup(), CRYPTO_cleanup_all_ex_data(),
RAND_cleanup(), SSL_COMP_free_compression_methods(), ERR_free_strings() and
COMP_zlib_cleanup().
[Matt Caswell]
*) --strict-warnings no longer enables runtime debugging options
such as REF_DEBUG. Instead, debug options are automatically
enabled with '--debug' builds.
[Andy Polyakov, Emilia Käsper]
*) Made DH and DH_METHOD opaque. The structures for managing DH objects
have been moved out of the public header files. New functions for managing
these have been added.
[Matt Caswell]
*) Made RSA and RSA_METHOD opaque. The structures for managing RSA
objects have been moved out of the public header files. New
functions for managing these have been added.
[Richard Levitte]
*) Made DSA and DSA_METHOD opaque. The structures for managing DSA objects
have been moved out of the public header files. New functions for managing
these have been added.
[Matt Caswell]
*) Made BIO and BIO_METHOD opaque. The structures for managing BIOs have been
moved out of the public header files. New functions for managing these
have been added.
[Matt Caswell]
*) Removed no-rijndael as a config option. Rijndael is an old name for AES.
[Matt Caswell]
*) Removed the mk1mf build scripts.
[Richard Levitte]
*) Headers are now wrapped, if necessary, with OPENSSL_NO_xxx, so
it is always safe to #include a header now.
[Rich Salz]
*) Removed the aged BC-32 config and all its supporting scripts
[Richard Levitte]
*) Removed support for Ultrix, Netware, and OS/2.
[Rich Salz]
*) Add support for HKDF.
[Alessandro Ghedini]
*) Add support for blake2b and blake2s
[Bill Cox]
*) Added support for "pipelining". Ciphers that have the
EVP_CIPH_FLAG_PIPELINE flag set have a capability to process multiple
encryptions/decryptions simultaneously. There are currently no built-in
ciphers with this property but the expectation is that engines will be able
to offer it to significantly improve throughput. Support has been extended
into libssl so that multiple records for a single connection can be
processed in one go (for >=TLS 1.1).
[Matt Caswell]
*) Added the AFALG engine. This is an async capable engine which is able to
offload work to the Linux kernel. In this initial version it only supports
AES128-CBC. The kernel must be version 4.1.0 or greater.
[Catriona Lucey]
*) OpenSSL now uses a new threading API. It is no longer necessary to
set locking callbacks to use OpenSSL in a multi-threaded environment. There
are two supported threading models: pthreads and windows threads. It is
also possible to configure OpenSSL at compile time for "no-threads". The
old threading API should no longer be used. The functions have been
replaced with "no-op" compatibility macros.
[Alessandro Ghedini, Matt Caswell]
*) Modify behavior of ALPN to invoke callback after SNI/servername
callback, such that updates to the SSL_CTX affect ALPN.
[Todd Short]
*) Add SSL_CIPHER queries for authentication and key-exchange.
[Todd Short]
*) Changes to the DEFAULT cipherlist:
- Prefer (EC)DHE handshakes over plain RSA.
- Prefer AEAD ciphers over legacy ciphers.
- Prefer ECDSA over RSA when both certificates are available.
- Prefer TLSv1.2 ciphers/PRF.
- Remove DSS, SEED, IDEA, CAMELLIA, and AES-CCM from the
default cipherlist.
[Emilia Käsper]
*) Change the ECC default curve list to be this, in order: x25519,
secp256r1, secp521r1, secp384r1.
[Rich Salz]
*) RC4 based libssl ciphersuites are now classed as "weak" ciphers and are
disabled by default. They can be re-enabled using the
enable-weak-ssl-ciphers option to Configure.
[Matt Caswell]
*) If the server has ALPN configured, but supports no protocols that the
client advertises, send a fatal "no_application_protocol" alert.
This behaviour is SHALL in RFC 7301, though it isn't universally
implemented by other servers.
[Emilia Käsper]
*) Add X25519 support.
Add ASN.1 and EVP_PKEY methods for X25519. This includes support
for public and private key encoding using the format documented in
draft-ietf-curdle-pkix-02. The coresponding EVP_PKEY method supports
key generation and key derivation.
TLS support complies with draft-ietf-tls-rfc4492bis-08 and uses
X25519(29).
[Steve Henson]
*) Deprecate SRP_VBASE_get_by_user.
SRP_VBASE_get_by_user had inconsistent memory management behaviour.
In order to fix an unavoidable memory leak (CVE-2016-0798),
SRP_VBASE_get_by_user was changed to ignore the "fake user" SRP
seed, even if the seed is configured.
Users should use SRP_VBASE_get1_by_user instead. Note that in
SRP_VBASE_get1_by_user, caller must free the returned value. Note
also that even though configuring the SRP seed attempts to hide
invalid usernames by continuing the handshake with fake
credentials, this behaviour is not constant time and no strong
guarantees are made that the handshake is indistinguishable from
that of a valid user.
[Emilia Käsper]
*) Configuration change; it's now possible to build dynamic engines
without having to build shared libraries and vice versa. This
only applies to the engines in engines/, those in crypto/engine/
will always be built into libcrypto (i.e. "static").
Building dynamic engines is enabled by default; to disable, use
the configuration option "disable-dynamic-engine".
The only requirements for building dynamic engines are the
presence of the DSO module and building with position independent
code, so they will also automatically be disabled if configuring
with "disable-dso" or "disable-pic".
The macros OPENSSL_NO_STATIC_ENGINE and OPENSSL_NO_DYNAMIC_ENGINE
are also taken away from openssl/opensslconf.h, as they are
irrelevant.
[Richard Levitte]
*) Configuration change; if there is a known flag to compile
position independent code, it will always be applied on the
libcrypto and libssl object files, and never on the application
object files. This means other libraries that use routines from
libcrypto / libssl can be made into shared libraries regardless
of how OpenSSL was configured.
If this isn't desirable, the configuration options "disable-pic"
or "no-pic" can be used to disable the use of PIC. This will
also disable building shared libraries and dynamic engines.
[Richard Levitte]
*) Removed JPAKE code. It was experimental and has no wide use.
[Rich Salz]
*) The INSTALL_PREFIX Makefile variable has been renamed to
DESTDIR. That makes for less confusion on what this variable
is for. Also, the configuration option --install_prefix is
removed.
[Richard Levitte]
*) Heartbeat for TLS has been removed and is disabled by default
for DTLS; configure with enable-heartbeats. Code that uses the
old #define's might need to be updated.
[Emilia Käsper, Rich Salz]
*) Rename REF_CHECK to REF_DEBUG.
[Rich Salz]
*) New "unified" build system
The "unified" build system is aimed to be a common system for all
platforms we support. With it comes new support for VMS.
This system builds supports building in a different directory tree
than the source tree. It produces one Makefile (for unix family
or lookalikes), or one descrip.mms (for VMS).
The source of information to make the Makefile / descrip.mms is
small files called 'build.info', holding the necessary
information for each directory with source to compile, and a
template in Configurations, like unix-Makefile.tmpl or
descrip.mms.tmpl.
With this change, the library names were also renamed on Windows
and on VMS. They now have names that are closer to the standard
on Unix, and include the major version number, and in certain
cases, the architecture they are built for. See "Notes on shared
libraries" in INSTALL.
We rely heavily on the perl module Text::Template.
[Richard Levitte]
*) Added support for auto-initialisation and de-initialisation of the library.
OpenSSL no longer requires explicit init or deinit routines to be called,
except in certain circumstances. See the OPENSSL_init_crypto() and
OPENSSL_init_ssl() man pages for further information.
[Matt Caswell]
*) The arguments to the DTLSv1_listen function have changed. Specifically the
"peer" argument is now expected to be a BIO_ADDR object.
*) Rewrite of BIO networking library. The BIO library lacked consistent
support of IPv6, and adding it required some more extensive
modifications. This introduces the BIO_ADDR and BIO_ADDRINFO types,
which hold all types of addresses and chains of address information.
It also introduces a new API, with functions like BIO_socket,
BIO_connect, BIO_listen, BIO_lookup and a rewrite of BIO_accept.
The source/sink BIOs BIO_s_connect, BIO_s_accept and BIO_s_datagram
have been adapted accordingly.
[Richard Levitte]
*) RSA_padding_check_PKCS1_type_1 now accepts inputs with and without
the leading 0-byte.
[Emilia Käsper]
*) CRIME protection: disable compression by default, even if OpenSSL is
compiled with zlib enabled. Applications can still enable compression
by calling SSL_CTX_clear_options(ctx, SSL_OP_NO_COMPRESSION), or by
using the SSL_CONF library to configure compression.
[Emilia Käsper]
*) The signature of the session callback configured with
SSL_CTX_sess_set_get_cb was changed. The read-only input buffer
was explicitly marked as 'const unsigned char*' instead of
'unsigned char*'.
[Emilia Käsper]
*) Always DPURIFY. Remove the use of uninitialized memory in the
RNG, and other conditional uses of DPURIFY. This makes -DPURIFY a no-op.
[Emilia Käsper]
*) Removed many obsolete configuration items, including
DES_PTR, DES_RISC1, DES_RISC2, DES_INT
MD2_CHAR, MD2_INT, MD2_LONG
BF_PTR, BF_PTR2
IDEA_SHORT, IDEA_LONG
RC2_SHORT, RC2_LONG, RC4_LONG, RC4_CHUNK, RC4_INDEX
[Rich Salz, with advice from Andy Polyakov]
*) Many BN internals have been moved to an internal header file.
[Rich Salz with help from Andy Polyakov]
*) Configuration and writing out the results from it has changed.
Files such as Makefile include/openssl/opensslconf.h and are now
produced through general templates, such as Makefile.in and
crypto/opensslconf.h.in and some help from the perl module
Text::Template.
Also, the center of configuration information is no longer
Makefile. Instead, Configure produces a perl module in
configdata.pm which holds most of the config data (in the hash
table %config), the target data that comes from the target
configuration in one of the Configurations/*.conf files (in
%target).
[Richard Levitte]
*) To clarify their intended purposes, the Configure options
--prefix and --openssldir change their semantics, and become more
straightforward and less interdependent.
--prefix shall be used exclusively to give the location INSTALLTOP
where programs, scripts, libraries, include files and manuals are
going to be installed. The default is now /usr/local.
--openssldir shall be used exclusively to give the default
location OPENSSLDIR where certificates, private keys, CRLs are
managed. This is also where the default openssl.cnf gets
installed.
If the directory given with this option is a relative path, the
values of both the --prefix value and the --openssldir value will
be combined to become OPENSSLDIR.
The default for --openssldir is INSTALLTOP/ssl.
Anyone who uses --openssldir to specify where OpenSSL is to be
installed MUST change to use --prefix instead.
[Richard Levitte]
*) The GOST engine was out of date and therefore it has been removed. An up
to date GOST engine is now being maintained in an external repository.
See: https://wiki.openssl.org/index.php/Binaries. Libssl still retains
support for GOST ciphersuites (these are only activated if a GOST engine
is present).
[Matt Caswell]
*) EGD is no longer supported by default; use enable-egd when
configuring.
[Ben Kaduk and Rich Salz]
*) The distribution now has Makefile.in files, which are used to
create Makefile's when Configure is run. *Configure must be run
before trying to build now.*
[Rich Salz]
*) The return value for SSL_CIPHER_description() for error conditions
has changed.
[Rich Salz]
*) Support for RFC6698/RFC7671 DANE TLSA peer authentication.
Obtaining and performing DNSSEC validation of TLSA records is
the application's responsibility. The application provides
the TLSA records of its choice to OpenSSL, and these are then
used to authenticate the peer.
The TLSA records need not even come from DNS. They can, for
example, be used to implement local end-entity certificate or
trust-anchor "pinning", where the "pin" data takes the form
of TLSA records, which can augment or replace verification
based on the usual WebPKI public certification authorities.
[Viktor Dukhovni]
*) Revert default OPENSSL_NO_DEPRECATED setting. Instead OpenSSL
continues to support deprecated interfaces in default builds.
However, applications are strongly advised to compile their
source files with -DOPENSSL_API_COMPAT=0x10100000L, which hides
the declarations of all interfaces deprecated in 0.9.8, 1.0.0
or the 1.1.0 releases.
In environments in which all applications have been ported to
not use any deprecated interfaces OpenSSL's Configure script
should be used with the --api=1.1.0 option to entirely remove
support for the deprecated features from the library and
unconditionally disable them in the installed headers.
Essentially the same effect can be achieved with the "no-deprecated"
argument to Configure, except that this will always restrict
the build to just the latest API, rather than a fixed API
version.
As applications are ported to future revisions of the API,
they should update their compile-time OPENSSL_API_COMPAT define
accordingly, but in most cases should be able to continue to
compile with later releases.
The OPENSSL_API_COMPAT versions for 1.0.0, and 0.9.8 are
0x10000000L and 0x00908000L, respectively. However those
versions did not support the OPENSSL_API_COMPAT feature, and
so applications are not typically tested for explicit support
of just the undeprecated features of either release.
[Viktor Dukhovni]
*) Add support for setting the minimum and maximum supported protocol.
It can bet set via the SSL_set_min_proto_version() and
SSL_set_max_proto_version(), or via the SSL_CONF's MinProtocol and
MaxProtcol. It's recommended to use the new APIs to disable
protocols instead of disabling individual protocols using
SSL_set_options() or SSL_CONF's Protocol. This change also
removes support for disabling TLS 1.2 in the OpenSSL TLS
client at compile time by defining OPENSSL_NO_TLS1_2_CLIENT.
[Kurt Roeckx]
*) Support for ChaCha20 and Poly1305 added to libcrypto and libssl.
[Andy Polyakov]
*) New EC_KEY_METHOD, this replaces the older ECDSA_METHOD and ECDH_METHOD
and integrates ECDSA and ECDH functionality into EC. Implementations can
now redirect key generation and no longer need to convert to or from
ECDSA_SIG format.
Note: the ecdsa.h and ecdh.h headers are now no longer needed and just
include the ec.h header file instead.
[Steve Henson]
*) Remove support for all 40 and 56 bit ciphers. This includes all the export
ciphers who are no longer supported and drops support the ephemeral RSA key
exchange. The LOW ciphers currently doesn't have any ciphers in it.
[Kurt Roeckx]
*) Made EVP_MD_CTX, EVP_MD, EVP_CIPHER_CTX, EVP_CIPHER and HMAC_CTX
opaque. For HMAC_CTX, the following constructors and destructors
were added:
HMAC_CTX *HMAC_CTX_new(void);
void HMAC_CTX_free(HMAC_CTX *ctx);
For EVP_MD and EVP_CIPHER, complete APIs to create, fill and
destroy such methods has been added. See EVP_MD_meth_new(3) and
EVP_CIPHER_meth_new(3) for documentation.
Additional changes:
1) EVP_MD_CTX_cleanup(), EVP_CIPHER_CTX_cleanup() and
HMAC_CTX_cleanup() were removed. HMAC_CTX_reset() and
EVP_MD_CTX_reset() should be called instead to reinitialise
an already created structure.
2) For consistency with the majority of our object creators and
destructors, EVP_MD_CTX_(create|destroy) were renamed to
EVP_MD_CTX_(new|free). The old names are retained as macros
for deprecated builds.
[Richard Levitte]
*) Added ASYNC support. Libcrypto now includes the async sub-library to enable
cryptographic operations to be performed asynchronously as long as an
asynchronous capable engine is used. See the ASYNC_start_job() man page for
further details. Libssl has also had this capability integrated with the
introduction of the new mode SSL_MODE_ASYNC and associated error
SSL_ERROR_WANT_ASYNC. See the SSL_CTX_set_mode() and SSL_get_error() man
pages. This work was developed in partnership with Intel Corp.
[Matt Caswell]
*) SSL_{CTX_}set_ecdh_auto() has been removed and ECDH is support is
always enabled now. If you want to disable the support you should
exclude it using the list of supported ciphers. This also means that the
"-no_ecdhe" option has been removed from s_server.
[Kurt Roeckx]
*) SSL_{CTX}_set_tmp_ecdh() which can set 1 EC curve now internally calls
SSL_{CTX_}set1_curves() which can set a list.
[Kurt Roeckx]
*) Remove support for SSL_{CTX_}set_tmp_ecdh_callback(). You should set the
curve you want to support using SSL_{CTX_}set1_curves().
[Kurt Roeckx]
*) State machine rewrite. The state machine code has been significantly
refactored in order to remove much duplication of code and solve issues
with the old code (see ssl/statem/README for further details). This change
does have some associated API changes. Notably the SSL_state() function
has been removed and replaced by SSL_get_state which now returns an
"OSSL_HANDSHAKE_STATE" instead of an int. SSL_set_state() has been removed
altogether. The previous handshake states defined in ssl.h and ssl3.h have
also been removed.
[Matt Caswell]
*) All instances of the string "ssleay" in the public API were replaced
with OpenSSL (case-matching; e.g., OPENSSL_VERSION for #define's)
Some error codes related to internal RSA_eay API's were renamed.
[Rich Salz]
*) The demo files in crypto/threads were moved to demo/threads.
[Rich Salz]
*) Removed obsolete engines: 4758cca, aep, atalla, cswift, nuron, gmp,
sureware and ubsec.
[Matt Caswell, Rich Salz]
*) New ASN.1 embed macro.
New ASN.1 macro ASN1_EMBED. This is the same as ASN1_SIMPLE except the
structure is not allocated: it is part of the parent. That is instead of
FOO *x;
it must be:
FOO x;
This reduces memory fragmentation and make it impossible to accidentally
set a mandatory field to NULL.
This currently only works for some fields specifically a SEQUENCE, CHOICE,
or ASN1_STRING type which is part of a parent SEQUENCE. Since it is
equivalent to ASN1_SIMPLE it cannot be tagged, OPTIONAL, SET OF or
SEQUENCE OF.
[Steve Henson]
*) Remove EVP_CHECK_DES_KEY, a compile-time option that never compiled.
[Emilia Käsper]
*) Removed DES and RC4 ciphersuites from DEFAULT. Also removed RC2 although
in 1.0.2 EXPORT was already removed and the only RC2 ciphersuite is also
an EXPORT one. COMPLEMENTOFDEFAULT has been updated accordingly to add
DES and RC4 ciphersuites.
[Matt Caswell]
*) Rewrite EVP_DecodeUpdate (base64 decoding) to fix several bugs.
This changes the decoding behaviour for some invalid messages,
though the change is mostly in the more lenient direction, and
legacy behaviour is preserved as much as possible.
[Emilia Käsper]
*) Fix no-stdio build.
[ David Woodhouse <David.Woodhouse@intel.com> and also
Ivan Nestlerode <ivan.nestlerode@sonos.com> ]
*) New testing framework
The testing framework has been largely rewritten and is now using
perl and the perl modules Test::Harness and an extended variant of
Test::More called OpenSSL::Test to do its work. All test scripts in
test/ have been rewritten into test recipes, and all direct calls to
executables in test/Makefile have become individual recipes using the
simplified testing OpenSSL::Test::Simple.
For documentation on our testing modules, do:
perldoc test/testlib/OpenSSL/Test/Simple.pm
perldoc test/testlib/OpenSSL/Test.pm
[Richard Levitte]
*) Revamped memory debug; only -DCRYPTO_MDEBUG and -DCRYPTO_MDEBUG_ABORT
are used; the latter aborts on memory leaks (usually checked on exit).
Some undocumented "set malloc, etc., hooks" functions were removed
and others were changed. All are now documented.
[Rich Salz]
*) In DSA_generate_parameters_ex, if the provided seed is too short,
return an error
[Rich Salz and Ismo Puustinen <ismo.puustinen@intel.com>]
*) Rewrite PSK to support ECDHE_PSK, DHE_PSK and RSA_PSK. Add ciphersuites
from RFC4279, RFC4785, RFC5487, RFC5489.
Thanks to Christian J. Dietrich and Giuseppe D'Angelo for the
original RSA_PSK patch.
[Steve Henson]
Remove support for SSL3_FLAGS_DELAY_CLIENT_FINISHED This flag was not set anywhere within the codebase (only read). It could only be set by an app reaching directly into s->s3->flags and setting it directly. However that method became impossible when libssl was opaquified. Even in 1.0.2/1.0.1 if an app set the flag directly it is only relevant to ssl3_connect(), which calls SSL_clear() during initialisation that clears any flag settings. Therefore it could take effect if the app set the flag after the handshake has started but before it completed. It seems quite unlikely that any apps really do this (especially as it is completely undocumented). The purpose of the flag is suppress flushing of the write bio on the client side at the end of the handshake after the client has written the Finished message whilst resuming a session. This enables the client to send application data as part of the same flight as the Finished message. This flag also controls the setting of a second flag SSL3_FLAGS_POP_BUFFER. There is an interesting comment in the code about this second flag in the implementation of ssl3_write: /* This is an experimental flag that sends the * last handshake message in the same packet as the first * use data - used to see if it helps the TCP protocol during * session-id reuse */ It seems the experiment did not work because as far as I can tell nothing is using this code. The above comment has been in the code since SSLeay. This commit removes support for SSL3_FLAGS_DELAY_CLIENT_FINISHED, as well as the associated SSL3_FLAGS_POP_BUFFER. Reviewed-by: Rich Salz <rsalz@openssl.org>
2015-07-21 07:02:39 +08:00
*) Dropped support for the SSL3_FLAGS_DELAY_CLIENT_FINISHED flag. This SSLeay
era flag was never set throughout the codebase (only read). Also removed
SSL3_FLAGS_POP_BUFFER which was only used if
SSL3_FLAGS_DELAY_CLIENT_FINISHED was also set.
[Matt Caswell]
*) Changed the default name options in the "ca", "crl", "req" and "x509"
to be "oneline" instead of "compat".
[Richard Levitte]
*) Remove SSL_OP_TLS_BLOCK_PADDING_BUG. This is SSLeay legacy, we're
not aware of clients that still exhibit this bug, and the workaround
hasn't been working properly for a while.
[Emilia Käsper]
*) The return type of BIO_number_read() and BIO_number_written() as well as
the corresponding num_read and num_write members in the BIO structure has
changed from unsigned long to uint64_t. On platforms where an unsigned
long is 32 bits (e.g. Windows) these counters could overflow if >4Gb is
transferred.
[Matt Caswell]
*) Given the pervasive nature of TLS extensions it is inadvisable to run
OpenSSL without support for them. It also means that maintaining
the OPENSSL_NO_TLSEXT option within the code is very invasive (and probably
not well tested). Therefore the OPENSSL_NO_TLSEXT option has been removed.
[Matt Caswell]
*) Removed support for the two export grade static DH ciphersuites
EXP-DH-RSA-DES-CBC-SHA and EXP-DH-DSS-DES-CBC-SHA. These two ciphersuites
were newly added (along with a number of other static DH ciphersuites) to
1.0.2. However the two export ones have *never* worked since they were
introduced. It seems strange in any case to be adding new export
ciphersuites, and given "logjam" it also does not seem correct to fix them.
[Matt Caswell]
*) Version negotiation has been rewritten. In particular SSLv23_method(),
SSLv23_client_method() and SSLv23_server_method() have been deprecated,
and turned into macros which simply call the new preferred function names
TLS_method(), TLS_client_method() and TLS_server_method(). All new code
should use the new names instead. Also as part of this change the ssl23.h
header file has been removed.
[Matt Caswell]
*) Support for Kerberos ciphersuites in TLS (RFC2712) has been removed. This
code and the associated standard is no longer considered fit-for-purpose.
[Matt Caswell]
*) RT2547 was closed. When generating a private key, try to make the
output file readable only by the owner. This behavior change might
be noticeable when interacting with other software.
*) Documented all exdata functions. Added CRYPTO_free_ex_index.
Added a test.
[Rich Salz]
*) Added HTTP GET support to the ocsp command.
[Rich Salz]
*) Changed default digest for the dgst and enc commands from MD5 to
sha256
[Rich Salz]
*) RAND_pseudo_bytes has been deprecated. Users should use RAND_bytes instead.
[Matt Caswell]
Deprecate RAND_pseudo_bytes The justification for RAND_pseudo_bytes is somewhat dubious, and the reality is that it is frequently being misused. RAND_bytes and RAND_pseudo_bytes in the default implementation both end up calling ssleay_rand_bytes. Both may return -1 in an error condition. If there is insufficient entropy then both will return 0, but RAND_bytes will additionally add an error to the error queue. They both return 1 on success. Therefore the fundamental difference between the two is that one will add an error to the error queue with insufficient entory whilst the other will not. Frequently there are constructions of this form: if(RAND_pseudo_bytes(...) <= 1) goto err; In the above form insufficient entropy is treated as an error anyway, so RAND_bytes is probably the better form to use. This form is also seen: if(!RAND_pseudo_bytes(...)) goto err; This is technically not correct at all since a -1 return value is incorrectly handled - but this form will also treat insufficient entropy as an error. Within libssl it is required that you have correctly seeded your entropy pool and so there seems little benefit in using RAND_pseudo_bytes. Similarly in libcrypto many operations also require a correctly seeded entropy pool and so in most interesting cases you would be better off using RAND_bytes anyway. There is a significant risk of RAND_pseudo_bytes being incorrectly used in scenarios where security can be compromised by insufficient entropy. If you are not using the default implementation, then most engines use the same function to implement RAND_bytes and RAND_pseudo_bytes in any case. Given its misuse, limited benefit, and potential to compromise security, RAND_pseudo_bytes has been deprecated. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-26 21:52:30 +08:00
*) Added support for TLS extended master secret from
draft-ietf-tls-session-hash-03.txt. Thanks for Alfredo Pironti for an
initial patch which was a great help during development.
[Steve Henson]
*) All libssl internal structures have been removed from the public header
files, and the OPENSSL_NO_SSL_INTERN option has been removed (since it is
now redundant). Users should not attempt to access internal structures
directly. Instead they should use the provided API functions.
[Matt Caswell]
2013-09-13 05:12:21 +08:00
*) config has been changed so that by default OPENSSL_NO_DEPRECATED is used.
Access to deprecated functions can be re-enabled by running config with
"enable-deprecated". In addition applications wishing to use deprecated
functions must define OPENSSL_USE_DEPRECATED. Note that this new behaviour
will, by default, disable some transitive includes that previously existed
in the header files (e.g. ec.h will no longer, by default, include bn.h)
[Matt Caswell]
*) Added support for OCB mode. OpenSSL has been granted a patent license
compatible with the OpenSSL license for use of OCB. Details are available
at https://www.openssl.org/source/OCB-patent-grant-OpenSSL.pdf. Support
for OCB can be removed by calling config with no-ocb.
[Matt Caswell]
*) SSLv2 support has been removed. It still supports receiving a SSLv2
compatible client hello.
[Kurt Roeckx]
*) Increased the minimal RSA keysize from 256 to 512 bits [Rich Salz],
done while fixing the error code for the key-too-small case.
[Annie Yousar <a.yousar@informatik.hu-berlin.de>]
*) CA.sh has been removmed; use CA.pl instead.
[Rich Salz]
*) Removed old DES API.
[Rich Salz]
*) Remove various unsupported platforms:
Sony NEWS4
BEOS and BEOS_R5
NeXT
SUNOS
MPE/iX
Sinix/ReliantUNIX RM400
DGUX
NCR
Tandem
Cray
16-bit platforms such as WIN16
[Rich Salz]
*) Clean up OPENSSL_NO_xxx #define's
Use setbuf() and remove OPENSSL_NO_SETVBUF_IONBF
Rename OPENSSL_SYSNAME_xxx to OPENSSL_SYS_xxx
OPENSSL_NO_EC{DH,DSA} merged into OPENSSL_NO_EC
OPENSSL_NO_RIPEMD160, OPENSSL_NO_RIPEMD merged into OPENSSL_NO_RMD160
OPENSSL_NO_FP_API merged into OPENSSL_NO_STDIO
Remove OPENSSL_NO_BIO OPENSSL_NO_BUFFER OPENSSL_NO_CHAIN_VERIFY
OPENSSL_NO_EVP OPENSSL_NO_FIPS_ERR OPENSSL_NO_HASH_COMP
OPENSSL_NO_LHASH OPENSSL_NO_OBJECT OPENSSL_NO_SPEED OPENSSL_NO_STACK
OPENSSL_NO_X509 OPENSSL_NO_X509_VERIFY
Remove MS_STATIC; it's a relic from platforms <32 bits.
[Rich Salz]
*) Cleaned up dead code
Remove all but one '#ifdef undef' which is to be looked at.
[Rich Salz]
*) Clean up calling of xxx_free routines.
Just like free(), fix most of the xxx_free routines to accept
NULL. Remove the non-null checks from callers. Save much code.
[Rich Salz]
*) Add secure heap for storage of private keys (when possible).
Add BIO_s_secmem(), CBIGNUM, etc.
Contributed by Akamai Technologies under our Corporate CLA.
[Rich Salz]
2014-06-01 22:30:01 +08:00
*) Experimental support for a new, fast, unbiased prime candidate generator,
bn_probable_prime_dh_coprime(). Not currently used by any prime generator.
[Felix Laurie von Massenbach <felix@erbridge.co.uk>]
*) New output format NSS in the sess_id command line tool. This allows
exporting the session id and the master key in NSS keylog format.
[Martin Kaiser <martin@kaiser.cx>]
*) Harmonize version and its documentation. -f flag is used to display
compilation flags.
[mancha <mancha1@zoho.com>]
*) Fix eckey_priv_encode so it immediately returns an error upon a failure
in i2d_ECPrivateKey. Thanks to Ted Unangst for feedback on this issue.
[mancha <mancha1@zoho.com>]
2014-04-22 19:38:26 +08:00
*) Fix some double frees. These are not thought to be exploitable.
[mancha <mancha1@zoho.com>]
*) A missing bounds check in the handling of the TLS heartbeat extension
can be used to reveal up to 64k of memory to a connected client or
server.
Thanks for Neel Mehta of Google Security for discovering this bug and to
Adam Langley <agl@chromium.org> and Bodo Moeller <bmoeller@acm.org> for
preparing the fix (CVE-2014-0160)
[Adam Langley, Bodo Moeller]
*) Fix for the attack described in the paper "Recovering OpenSSL
ECDSA Nonces Using the FLUSH+RELOAD Cache Side-channel Attack"
by Yuval Yarom and Naomi Benger. Details can be obtained from:
http://eprint.iacr.org/2014/140
Thanks to Yuval Yarom and Naomi Benger for discovering this
flaw and to Yuval Yarom for supplying a fix (CVE-2014-0076)
[Yuval Yarom and Naomi Benger]
*) Use algorithm specific chains in SSL_CTX_use_certificate_chain_file():
this fixes a limitation in previous versions of OpenSSL.
[Steve Henson]
*) Experimental encrypt-then-mac support.
Experimental support for encrypt then mac from
draft-gutmann-tls-encrypt-then-mac-02.txt
2013-09-08 22:07:44 +08:00
2013-10-22 12:37:43 +08:00
To enable it set the appropriate extension number (0x42 for the test
server) using e.g. -DTLSEXT_TYPE_encrypt_then_mac=0x42
2013-09-08 22:07:44 +08:00
For non-compliant peers (i.e. just about everything) this should have no
effect.
WARNING: EXPERIMENTAL, SUBJECT TO CHANGE.
2013-09-08 22:07:44 +08:00
[Steve Henson]
*) Add EVP support for key wrapping algorithms, to avoid problems with
existing code the flag EVP_CIPHER_CTX_WRAP_ALLOW has to be set in
the EVP_CIPHER_CTX or an error is returned. Add AES and DES3 wrap
algorithms and include tests cases.
[Steve Henson]
2013-06-22 06:35:02 +08:00
*) Extend CMS code to support RSA-PSS signatures and RSA-OAEP for
enveloped data.
[Steve Henson]
*) Extended RSA OAEP support via EVP_PKEY API. Options to specify digest,
MGF1 digest and OAEP label.
[Steve Henson]
2012-12-12 00:05:14 +08:00
*) Make openssl verify return errors.
[Chris Palmer <palmer@google.com> and Ben Laurie]
*) New function ASN1_TIME_diff to calculate the difference between two
ASN1_TIME structures or one structure and the current time.
[Steve Henson]
*) Update fips_test_suite to support multiple command line options. New
test to induce all self test errors in sequence and check expected
failures.
[Steve Henson]
*) Add FIPS_{rsa,dsa,ecdsa}_{sign,verify} functions which digest and
sign or verify all in one operation.
[Steve Henson]
*) Add fips_algvs: a multicall fips utility incorporating all the algorithm
test programs and fips_test_suite. Includes functionality to parse
the minimal script output of fipsalgest.pl directly.
[Steve Henson]
*) Add authorisation parameter to FIPS_module_mode_set().
[Steve Henson]
2011-09-30 07:08:23 +08:00
*) Add FIPS selftest for ECDH algorithm using P-224 and B-233 curves.
[Steve Henson]
*) Use separate DRBG fields for internal and external flags. New function
FIPS_drbg_health_check() to perform on demand health checking. Add
generation tests to fips_test_suite with reduced health check interval to
demonstrate periodic health checking. Add "nodh" option to
fips_test_suite to skip very slow DH test.
[Steve Henson]
*) New function FIPS_get_cipherbynid() to lookup FIPS supported ciphers
based on NID.
[Steve Henson]
*) More extensive health check for DRBG checking many more failure modes.
New function FIPS_selftest_drbg_all() to handle every possible DRBG
combination: call this in fips_test_suite.
[Steve Henson]
*) Add support for canonical generation of DSA parameter 'g'. See
FIPS 186-3 A.2.3.
*) Add support for HMAC DRBG from SP800-90. Update DRBG algorithm test and
POST to handle HMAC cases.
2011-08-09 06:07:38 +08:00
[Steve Henson]
*) Add functions FIPS_module_version() and FIPS_module_version_text()
2013-06-05 19:46:49 +08:00
to return numerical and string versions of the FIPS module number.
[Steve Henson]
*) Rename FIPS_mode_set and FIPS_mode to FIPS_module_mode_set and
2013-06-05 19:46:49 +08:00
FIPS_module_mode. FIPS_mode and FIPS_mode_set will be implemented
outside the validated module in the FIPS capable OpenSSL.
[Steve Henson]
*) Minor change to DRBG entropy callback semantics. In some cases
2013-06-05 19:46:49 +08:00
there is no multiple of the block length between min_len and
max_len. Allow the callback to return more than max_len bytes
of entropy but discard any extra: it is the callback's responsibility
to ensure that the extra data discarded does not impact the
requested amount of entropy.
[Steve Henson]
2011-04-24 03:55:55 +08:00
*) Add PRNG security strength checks to RSA, DSA and ECDSA using
information in FIPS186-3, SP800-57 and SP800-131A.
[Steve Henson]
*) CCM support via EVP. Interface is very similar to GCM case except we
must supply all data in one chunk (i.e. no update, final) and the
message length must be supplied if AAD is used. Add algorithm test
support.
2011-04-18 22:25:11 +08:00
[Steve Henson]
*) Initial version of POST overhaul. Add POST callback to allow the status
of POST to be monitored and/or failures induced. Modify fips_test_suite
to use callback. Always run all selftests even if one fails.
[Steve Henson]
*) XTS support including algorithm test driver in the fips_gcmtest program.
Note: this does increase the maximum key length from 32 to 64 bytes but
there should be no binary compatibility issues as existing applications
will never use XTS mode.
2011-04-13 07:21:33 +08:00
[Steve Henson]
*) Extensive reorganisation of FIPS PRNG behaviour. Remove all dependencies
to OpenSSL RAND code and replace with a tiny FIPS RAND API which also
performs algorithm blocking for unapproved PRNG types. Also do not
set PRNG type in FIPS_mode_set(): leave this to the application.
Add default OpenSSL DRBG handling: sets up FIPS PRNG and seeds with
2011-04-07 07:41:19 +08:00
the standard OpenSSL PRNG: set additional data to a date time vector.
[Steve Henson]
*) Rename old X9.31 PRNG functions of the form FIPS_rand* to FIPS_x931*.
This shouldn't present any incompatibility problems because applications
shouldn't be using these directly and any that are will need to rethink
anyway as the X9.31 PRNG is now deprecated by FIPS 140-2
[Steve Henson]
*) Extensive self tests and health checking required by SP800-90 DRBG.
Remove strength parameter from FIPS_drbg_instantiate and always
instantiate at maximum supported strength.
[Steve Henson]
2011-03-10 07:44:06 +08:00
*) Add ECDH code to fips module and fips_ecdhvs for primitives only testing.
[Steve Henson]
2011-03-09 03:10:17 +08:00
*) New algorithm test program fips_dhvs to handle DH primitives only testing.
[Steve Henson]
*) New function DH_compute_key_padded() to compute a DH key and pad with
leading zeroes if needed: this complies with SP800-56A et al.
[Steve Henson]
*) Initial implementation of SP800-90 DRBGs for Hash and CTR. Not used by
anything, incomplete, subject to change and largely untested at present.
[Steve Henson]
*) Modify fipscanisteronly build option to only build the necessary object
files by filtering FIPS_EX_OBJ through a perl script in crypto/Makefile.
[Steve Henson]
*) Add experimental option FIPSSYMS to give all symbols in
fipscanister.o and FIPS or fips prefix. This will avoid
conflicts with future versions of OpenSSL. Add perl script
util/fipsas.pl to preprocess assembly language source files
and rename any affected symbols.
[Steve Henson]
*) Add selftest checks and algorithm block of non-fips algorithms in
FIPS mode. Remove DES2 from selftests.
[Steve Henson]
*) Add ECDSA code to fips module. Add tiny fips_ecdsa_check to just
return internal method without any ENGINE dependencies. Add new
tiny fips sign and verify functions.
[Steve Henson]
*) New build option no-ec2m to disable characteristic 2 code.
[Steve Henson]
*) New build option "fipscanisteronly". This only builds fipscanister.o
and (currently) associated fips utilities. Uses the file Makefile.fips
instead of Makefile.org as the prototype.
[Steve Henson]
*) Add some FIPS mode restrictions to GCM. Add internal IV generator.
Update fips_gcmtest to use IV generator.
[Steve Henson]
*) Initial, experimental EVP support for AES-GCM. AAD can be input by
setting output buffer to NULL. The *Final function must be
called although it will not retrieve any additional data. The tag
can be set or retrieved with a ctrl. The IV length is by default 12
bytes (96 bits) but can be set to an alternative value. If the IV
length exceeds the maximum IV length (currently 16 bytes) it cannot be
set before the key.
[Steve Henson]
*) New flag in ciphers: EVP_CIPH_FLAG_CUSTOM_CIPHER. This means the
underlying do_cipher function handles all cipher semantics itself
including padding and finalisation. This is useful if (for example)
an ENGINE cipher handles block padding itself. The behaviour of
do_cipher is subtly changed if this flag is set: the return value
is the number of characters written to the output buffer (zero is
no longer an error code) or a negative error code. Also if the
input buffer is NULL and length 0 finalisation should be performed.
[Steve Henson]
*) If a candidate issuer certificate is already part of the constructed
path ignore it: new debug notification X509_V_ERR_PATH_LOOP for this case.
[Steve Henson]
*) Improve forward-security support: add functions
void SSL_CTX_set_not_resumable_session_callback(SSL_CTX *ctx, int (*cb)(SSL *ssl, int is_forward_secure))
void SSL_set_not_resumable_session_callback(SSL *ssl, int (*cb)(SSL *ssl, int is_forward_secure))
for use by SSL/TLS servers; the callback function will be called whenever a
new session is created, and gets to decide whether the session may be
cached to make it resumable (return 0) or not (return 1). (As by the
SSL/TLS protocol specifications, the session_id sent by the server will be
empty to indicate that the session is not resumable; also, the server will
not generate RFC 4507 (RFC 5077) session tickets.)
A simple reasonable callback implementation is to return is_forward_secure.
This parameter will be set to 1 or 0 depending on the ciphersuite selected
by the SSL/TLS server library, indicating whether it can provide forward
security.
[Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
*) New -verify_name option in command line utilities to set verification
parameters by name.
[Steve Henson]
*) Initial CMAC implementation. WARNING: EXPERIMENTAL, API MAY CHANGE.
Add CMAC pkey methods.
[Steve Henson]
*) Experimental renegotiation in s_server -www mode. If the client
browses /reneg connection is renegotiated. If /renegcert it is
renegotiated requesting a certificate.
[Steve Henson]
*) Add an "external" session cache for debugging purposes to s_server. This
should help trace issues which normally are only apparent in deployed
multi-process servers.
[Steve Henson]
*) Extensive audit of libcrypto with DEBUG_UNUSED. Fix many cases where
return value is ignored. NB. The functions RAND_add(), RAND_seed(),
BIO_set_cipher() and some obscure PEM functions were changed so they
can now return an error. The RAND changes required a change to the
RAND_METHOD structure.
[Steve Henson]
*) New macro __owur for "OpenSSL Warn Unused Result". This makes use of
a gcc attribute to warn if the result of a function is ignored. This
is enable if DEBUG_UNUSED is set. Add to several functions in evp.h
whose return value is often ignored.
[Steve Henson]
*) New -noct, -requestct, -requirect and -ctlogfile options for s_client.
These allow SCTs (signed certificate timestamps) to be requested and
validated when establishing a connection.
[Rob Percival <robpercival@google.com>]
Changes between 1.0.2g and 1.0.2h [3 May 2016]
*) Prevent padding oracle in AES-NI CBC MAC check
A MITM attacker can use a padding oracle attack to decrypt traffic
when the connection uses an AES CBC cipher and the server support
AES-NI.
This issue was introduced as part of the fix for Lucky 13 padding
attack (CVE-2013-0169). The padding check was rewritten to be in
constant time by making sure that always the same bytes are read and
compared against either the MAC or padding bytes. But it no longer
checked that there was enough data to have both the MAC and padding
bytes.
This issue was reported by Juraj Somorovsky using TLS-Attacker.
(CVE-2016-2107)
[Kurt Roeckx]
*) Fix EVP_EncodeUpdate overflow
An overflow can occur in the EVP_EncodeUpdate() function which is used for
Base64 encoding of binary data. If an attacker is able to supply very large
amounts of input data then a length check can overflow resulting in a heap
corruption.
Internally to OpenSSL the EVP_EncodeUpdate() function is primarily used by
the PEM_write_bio* family of functions. These are mainly used within the
OpenSSL command line applications, so any application which processes data
from an untrusted source and outputs it as a PEM file should be considered
vulnerable to this issue. User applications that call these APIs directly
with large amounts of untrusted data may also be vulnerable.
This issue was reported by Guido Vranken.
(CVE-2016-2105)
[Matt Caswell]
*) Fix EVP_EncryptUpdate overflow
An overflow can occur in the EVP_EncryptUpdate() function. If an attacker
is able to supply very large amounts of input data after a previous call to
EVP_EncryptUpdate() with a partial block then a length check can overflow
resulting in a heap corruption. Following an analysis of all OpenSSL
internal usage of the EVP_EncryptUpdate() function all usage is one of two
forms. The first form is where the EVP_EncryptUpdate() call is known to be
the first called function after an EVP_EncryptInit(), and therefore that
specific call must be safe. The second form is where the length passed to
EVP_EncryptUpdate() can be seen from the code to be some small value and
therefore there is no possibility of an overflow. Since all instances are
one of these two forms, it is believed that there can be no overflows in
internal code due to this problem. It should be noted that
EVP_DecryptUpdate() can call EVP_EncryptUpdate() in certain code paths.
Also EVP_CipherUpdate() is a synonym for EVP_EncryptUpdate(). All instances
of these calls have also been analysed too and it is believed there are no
instances in internal usage where an overflow could occur.
This issue was reported by Guido Vranken.
(CVE-2016-2106)
[Matt Caswell]
*) Prevent ASN.1 BIO excessive memory allocation
When ASN.1 data is read from a BIO using functions such as d2i_CMS_bio()
a short invalid encoding can cause allocation of large amounts of memory
potentially consuming excessive resources or exhausting memory.
Any application parsing untrusted data through d2i BIO functions is
affected. The memory based functions such as d2i_X509() are *not* affected.
Since the memory based functions are used by the TLS library, TLS
applications are not affected.
This issue was reported by Brian Carpenter.
(CVE-2016-2109)
[Stephen Henson]
*) EBCDIC overread
ASN1 Strings that are over 1024 bytes can cause an overread in applications
using the X509_NAME_oneline() function on EBCDIC systems. This could result
in arbitrary stack data being returned in the buffer.
This issue was reported by Guido Vranken.
(CVE-2016-2176)
[Matt Caswell]
*) Modify behavior of ALPN to invoke callback after SNI/servername
callback, such that updates to the SSL_CTX affect ALPN.
[Todd Short]
*) Remove LOW from the DEFAULT cipher list. This removes singles DES from the
default.
[Kurt Roeckx]
*) Only remove the SSLv2 methods with the no-ssl2-method option. When the
methods are enabled and ssl2 is disabled the methods return NULL.
[Kurt Roeckx]
Changes between 1.0.2f and 1.0.2g [1 Mar 2016]
* Disable weak ciphers in SSLv3 and up in default builds of OpenSSL.
Builds that are not configured with "enable-weak-ssl-ciphers" will not
provide any "EXPORT" or "LOW" strength ciphers.
[Viktor Dukhovni]
* Disable SSLv2 default build, default negotiation and weak ciphers. SSLv2
is by default disabled at build-time. Builds that are not configured with
"enable-ssl2" will not support SSLv2. Even if "enable-ssl2" is used,
users who want to negotiate SSLv2 via the version-flexible SSLv23_method()
will need to explicitly call either of:
SSL_CTX_clear_options(ctx, SSL_OP_NO_SSLv2);
or
SSL_clear_options(ssl, SSL_OP_NO_SSLv2);
as appropriate. Even if either of those is used, or the application
explicitly uses the version-specific SSLv2_method() or its client and
server variants, SSLv2 ciphers vulnerable to exhaustive search key
recovery have been removed. Specifically, the SSLv2 40-bit EXPORT
ciphers, and SSLv2 56-bit DES are no longer available.
(CVE-2016-0800)
[Viktor Dukhovni]
*) Fix a double-free in DSA code
A double free bug was discovered when OpenSSL parses malformed DSA private
keys and could lead to a DoS attack or memory corruption for applications
that receive DSA private keys from untrusted sources. This scenario is
considered rare.
This issue was reported to OpenSSL by Adam Langley(Google/BoringSSL) using
libFuzzer.
(CVE-2016-0705)
[Stephen Henson]
*) Disable SRP fake user seed to address a server memory leak.
Add a new method SRP_VBASE_get1_by_user that handles the seed properly.
SRP_VBASE_get_by_user had inconsistent memory management behaviour.
In order to fix an unavoidable memory leak, SRP_VBASE_get_by_user
was changed to ignore the "fake user" SRP seed, even if the seed
is configured.
Users should use SRP_VBASE_get1_by_user instead. Note that in
SRP_VBASE_get1_by_user, caller must free the returned value. Note
also that even though configuring the SRP seed attempts to hide
invalid usernames by continuing the handshake with fake
credentials, this behaviour is not constant time and no strong
guarantees are made that the handshake is indistinguishable from
that of a valid user.
(CVE-2016-0798)
[Emilia Käsper]
*) Fix BN_hex2bn/BN_dec2bn NULL pointer deref/heap corruption
In the BN_hex2bn function the number of hex digits is calculated using an
int value |i|. Later |bn_expand| is called with a value of |i * 4|. For
large values of |i| this can result in |bn_expand| not allocating any
memory because |i * 4| is negative. This can leave the internal BIGNUM data
field as NULL leading to a subsequent NULL ptr deref. For very large values
of |i|, the calculation |i * 4| could be a positive value smaller than |i|.
In this case memory is allocated to the internal BIGNUM data field, but it
is insufficiently sized leading to heap corruption. A similar issue exists
in BN_dec2bn. This could have security consequences if BN_hex2bn/BN_dec2bn
is ever called by user applications with very large untrusted hex/dec data.
This is anticipated to be a rare occurrence.
All OpenSSL internal usage of these functions use data that is not expected
to be untrusted, e.g. config file data or application command line
arguments. If user developed applications generate config file data based
on untrusted data then it is possible that this could also lead to security
consequences. This is also anticipated to be rare.
This issue was reported to OpenSSL by Guido Vranken.
(CVE-2016-0797)
[Matt Caswell]
*) Fix memory issues in BIO_*printf functions
The internal |fmtstr| function used in processing a "%s" format string in
the BIO_*printf functions could overflow while calculating the length of a
string and cause an OOB read when printing very long strings.
Additionally the internal |doapr_outch| function can attempt to write to an
OOB memory location (at an offset from the NULL pointer) in the event of a
memory allocation failure. In 1.0.2 and below this could be caused where
the size of a buffer to be allocated is greater than INT_MAX. E.g. this
could be in processing a very long "%s" format string. Memory leaks can
also occur.
The first issue may mask the second issue dependent on compiler behaviour.
These problems could enable attacks where large amounts of untrusted data
is passed to the BIO_*printf functions. If applications use these functions
in this way then they could be vulnerable. OpenSSL itself uses these
functions when printing out human-readable dumps of ASN.1 data. Therefore
applications that print this data could be vulnerable if the data is from
untrusted sources. OpenSSL command line applications could also be
vulnerable where they print out ASN.1 data, or if untrusted data is passed
as command line arguments.
Libssl is not considered directly vulnerable. Additionally certificates etc
received via remote connections via libssl are also unlikely to be able to
trigger these issues because of message size limits enforced within libssl.
This issue was reported to OpenSSL Guido Vranken.
(CVE-2016-0799)
[Matt Caswell]
*) Side channel attack on modular exponentiation
A side-channel attack was found which makes use of cache-bank conflicts on
the Intel Sandy-Bridge microarchitecture which could lead to the recovery
of RSA keys. The ability to exploit this issue is limited as it relies on
an attacker who has control of code in a thread running on the same
hyper-threaded core as the victim thread which is performing decryptions.
This issue was reported to OpenSSL by Yuval Yarom, The University of
Adelaide and NICTA, Daniel Genkin, Technion and Tel Aviv University, and
Nadia Heninger, University of Pennsylvania with more information at
http://cachebleed.info.
(CVE-2016-0702)
[Andy Polyakov]
*) Change the req app to generate a 2048-bit RSA/DSA key by default,
if no keysize is specified with default_bits. This fixes an
omission in an earlier change that changed all RSA/DSA key generation
apps to use 2048 bits by default.
[Emilia Käsper]
Changes between 1.0.2e and 1.0.2f [28 Jan 2016]
*) DH small subgroups
Historically OpenSSL only ever generated DH parameters based on "safe"
primes. More recently (in version 1.0.2) support was provided for
generating X9.42 style parameter files such as those required for RFC 5114
support. The primes used in such files may not be "safe". Where an
application is using DH configured with parameters based on primes that are
not "safe" then an attacker could use this fact to find a peer's private
DH exponent. This attack requires that the attacker complete multiple
handshakes in which the peer uses the same private DH exponent. For example
this could be used to discover a TLS server's private DH exponent if it's
reusing the private DH exponent or it's using a static DH ciphersuite.
OpenSSL provides the option SSL_OP_SINGLE_DH_USE for ephemeral DH (DHE) in
TLS. It is not on by default. If the option is not set then the server
reuses the same private DH exponent for the life of the server process and
would be vulnerable to this attack. It is believed that many popular
applications do set this option and would therefore not be at risk.
The fix for this issue adds an additional check where a "q" parameter is
available (as is the case in X9.42 based parameters). This detects the
only known attack, and is the only possible defense for static DH
ciphersuites. This could have some performance impact.
Additionally the SSL_OP_SINGLE_DH_USE option has been switched on by
default and cannot be disabled. This could have some performance impact.
This issue was reported to OpenSSL by Antonio Sanso (Adobe).
(CVE-2016-0701)
[Matt Caswell]
*) SSLv2 doesn't block disabled ciphers
A malicious client can negotiate SSLv2 ciphers that have been disabled on
the server and complete SSLv2 handshakes even if all SSLv2 ciphers have
been disabled, provided that the SSLv2 protocol was not also disabled via
SSL_OP_NO_SSLv2.
This issue was reported to OpenSSL on 26th December 2015 by Nimrod Aviram
and Sebastian Schinzel.
(CVE-2015-3197)
[Viktor Dukhovni]
Changes between 1.0.2d and 1.0.2e [3 Dec 2015]
*) BN_mod_exp may produce incorrect results on x86_64
There is a carry propagating bug in the x86_64 Montgomery squaring
procedure. No EC algorithms are affected. Analysis suggests that attacks
against RSA and DSA as a result of this defect would be very difficult to
perform and are not believed likely. Attacks against DH are considered just
feasible (although very difficult) because most of the work necessary to
deduce information about a private key may be performed offline. The amount
of resources required for such an attack would be very significant and
likely only accessible to a limited number of attackers. An attacker would
additionally need online access to an unpatched system using the target
private key in a scenario with persistent DH parameters and a private
key that is shared between multiple clients. For example this can occur by
default in OpenSSL DHE based SSL/TLS ciphersuites.
This issue was reported to OpenSSL by Hanno Böck.
(CVE-2015-3193)
[Andy Polyakov]
*) Certificate verify crash with missing PSS parameter
The signature verification routines will crash with a NULL pointer
dereference if presented with an ASN.1 signature using the RSA PSS
algorithm and absent mask generation function parameter. Since these
routines are used to verify certificate signature algorithms this can be
used to crash any certificate verification operation and exploited in a
DoS attack. Any application which performs certificate verification is
vulnerable including OpenSSL clients and servers which enable client
authentication.
This issue was reported to OpenSSL by Loïc Jonas Etienne (Qnective AG).
(CVE-2015-3194)
[Stephen Henson]
*) X509_ATTRIBUTE memory leak
When presented with a malformed X509_ATTRIBUTE structure OpenSSL will leak
memory. This structure is used by the PKCS#7 and CMS routines so any
application which reads PKCS#7 or CMS data from untrusted sources is
affected. SSL/TLS is not affected.
This issue was reported to OpenSSL by Adam Langley (Google/BoringSSL) using
libFuzzer.
(CVE-2015-3195)
[Stephen Henson]
*) Rewrite EVP_DecodeUpdate (base64 decoding) to fix several bugs.
This changes the decoding behaviour for some invalid messages,
though the change is mostly in the more lenient direction, and
legacy behaviour is preserved as much as possible.
[Emilia Käsper]
*) In DSA_generate_parameters_ex, if the provided seed is too short,
return an error
[Rich Salz and Ismo Puustinen <ismo.puustinen@intel.com>]
Changes between 1.0.2c and 1.0.2d [9 Jul 2015]
*) Alternate chains certificate forgery
During certificate verification, OpenSSL will attempt to find an
alternative certificate chain if the first attempt to build such a chain
fails. An error in the implementation of this logic can mean that an
attacker could cause certain checks on untrusted certificates to be
bypassed, such as the CA flag, enabling them to use a valid leaf
certificate to act as a CA and "issue" an invalid certificate.
This issue was reported to OpenSSL by Adam Langley/David Benjamin
(Google/BoringSSL).
[Matt Caswell]
Changes between 1.0.2b and 1.0.2c [12 Jun 2015]
*) Fix HMAC ABI incompatibility. The previous version introduced an ABI
incompatibility in the handling of HMAC. The previous ABI has now been
restored.
[Matt Caswell]
Changes between 1.0.2a and 1.0.2b [11 Jun 2015]
*) Malformed ECParameters causes infinite loop
When processing an ECParameters structure OpenSSL enters an infinite loop
if the curve specified is over a specially malformed binary polynomial
field.
This can be used to perform denial of service against any
system which processes public keys, certificate requests or
certificates. This includes TLS clients and TLS servers with
client authentication enabled.
This issue was reported to OpenSSL by Joseph Barr-Pixton.
(CVE-2015-1788)
[Andy Polyakov]
*) Exploitable out-of-bounds read in X509_cmp_time
X509_cmp_time does not properly check the length of the ASN1_TIME
string and can read a few bytes out of bounds. In addition,
X509_cmp_time accepts an arbitrary number of fractional seconds in the
time string.
An attacker can use this to craft malformed certificates and CRLs of
various sizes and potentially cause a segmentation fault, resulting in
a DoS on applications that verify certificates or CRLs. TLS clients
that verify CRLs are affected. TLS clients and servers with client
authentication enabled may be affected if they use custom verification
callbacks.
This issue was reported to OpenSSL by Robert Swiecki (Google), and
independently by Hanno Böck.
(CVE-2015-1789)
[Emilia Käsper]
*) PKCS7 crash with missing EnvelopedContent
The PKCS#7 parsing code does not handle missing inner EncryptedContent
correctly. An attacker can craft malformed ASN.1-encoded PKCS#7 blobs
with missing content and trigger a NULL pointer dereference on parsing.
Applications that decrypt PKCS#7 data or otherwise parse PKCS#7
structures from untrusted sources are affected. OpenSSL clients and
servers are not affected.
This issue was reported to OpenSSL by Michal Zalewski (Google).
(CVE-2015-1790)
[Emilia Käsper]
*) CMS verify infinite loop with unknown hash function
When verifying a signedData message the CMS code can enter an infinite loop
if presented with an unknown hash function OID. This can be used to perform
denial of service against any system which verifies signedData messages using
the CMS code.
This issue was reported to OpenSSL by Johannes Bauer.
(CVE-2015-1792)
[Stephen Henson]
*) Race condition handling NewSessionTicket
If a NewSessionTicket is received by a multi-threaded client when attempting to
reuse a previous ticket then a race condition can occur potentially leading to
a double free of the ticket data.
(CVE-2015-1791)
[Matt Caswell]
*) Only support 256-bit or stronger elliptic curves with the
'ecdh_auto' setting (server) or by default (client). Of supported
curves, prefer P-256 (both).
[Emilia Kasper]
Changes between 1.0.2 and 1.0.2a [19 Mar 2015]
*) ClientHello sigalgs DoS fix
If a client connects to an OpenSSL 1.0.2 server and renegotiates with an
invalid signature algorithms extension a NULL pointer dereference will
occur. This can be exploited in a DoS attack against the server.
This issue was was reported to OpenSSL by David Ramos of Stanford
University.
(CVE-2015-0291)
[Stephen Henson and Matt Caswell]
*) Multiblock corrupted pointer fix
OpenSSL 1.0.2 introduced the "multiblock" performance improvement. This
feature only applies on 64 bit x86 architecture platforms that support AES
NI instructions. A defect in the implementation of "multiblock" can cause
OpenSSL's internal write buffer to become incorrectly set to NULL when
using non-blocking IO. Typically, when the user application is using a
socket BIO for writing, this will only result in a failed connection.
However if some other BIO is used then it is likely that a segmentation
fault will be triggered, thus enabling a potential DoS attack.
This issue was reported to OpenSSL by Daniel Danner and Rainer Mueller.
(CVE-2015-0290)
[Matt Caswell]
*) Segmentation fault in DTLSv1_listen fix
The DTLSv1_listen function is intended to be stateless and processes the
initial ClientHello from many peers. It is common for user code to loop
over the call to DTLSv1_listen until a valid ClientHello is received with
an associated cookie. A defect in the implementation of DTLSv1_listen means
that state is preserved in the SSL object from one invocation to the next
that can lead to a segmentation fault. Errors processing the initial
ClientHello can trigger this scenario. An example of such an error could be
that a DTLS1.0 only client is attempting to connect to a DTLS1.2 only
server.
This issue was reported to OpenSSL by Per Allansson.
(CVE-2015-0207)
[Matt Caswell]
*) Segmentation fault in ASN1_TYPE_cmp fix
The function ASN1_TYPE_cmp will crash with an invalid read if an attempt is
made to compare ASN.1 boolean types. Since ASN1_TYPE_cmp is used to check
certificate signature algorithm consistency this can be used to crash any
certificate verification operation and exploited in a DoS attack. Any
application which performs certificate verification is vulnerable including
OpenSSL clients and servers which enable client authentication.
(CVE-2015-0286)
[Stephen Henson]
*) Segmentation fault for invalid PSS parameters fix
The signature verification routines will crash with a NULL pointer
dereference if presented with an ASN.1 signature using the RSA PSS
algorithm and invalid parameters. Since these routines are used to verify
certificate signature algorithms this can be used to crash any
certificate verification operation and exploited in a DoS attack. Any
application which performs certificate verification is vulnerable including
OpenSSL clients and servers which enable client authentication.
This issue was was reported to OpenSSL by Brian Carpenter.
(CVE-2015-0208)
[Stephen Henson]
*) ASN.1 structure reuse memory corruption fix
Reusing a structure in ASN.1 parsing may allow an attacker to cause
memory corruption via an invalid write. Such reuse is and has been
strongly discouraged and is believed to be rare.
Applications that parse structures containing CHOICE or ANY DEFINED BY
components may be affected. Certificate parsing (d2i_X509 and related
functions) are however not affected. OpenSSL clients and servers are
not affected.
(CVE-2015-0287)
[Stephen Henson]
*) PKCS7 NULL pointer dereferences fix
The PKCS#7 parsing code does not handle missing outer ContentInfo
correctly. An attacker can craft malformed ASN.1-encoded PKCS#7 blobs with
missing content and trigger a NULL pointer dereference on parsing.
Applications that verify PKCS#7 signatures, decrypt PKCS#7 data or
otherwise parse PKCS#7 structures from untrusted sources are
affected. OpenSSL clients and servers are not affected.
This issue was reported to OpenSSL by Michal Zalewski (Google).
(CVE-2015-0289)
[Emilia Käsper]
*) DoS via reachable assert in SSLv2 servers fix
A malicious client can trigger an OPENSSL_assert (i.e., an abort) in
servers that both support SSLv2 and enable export cipher suites by sending
a specially crafted SSLv2 CLIENT-MASTER-KEY message.
This issue was discovered by Sean Burford (Google) and Emilia Käsper
(OpenSSL development team).
(CVE-2015-0293)
[Emilia Käsper]
*) Empty CKE with client auth and DHE fix
If client auth is used then a server can seg fault in the event of a DHE
ciphersuite being selected and a zero length ClientKeyExchange message
being sent by the client. This could be exploited in a DoS attack.
(CVE-2015-1787)
[Matt Caswell]
*) Handshake with unseeded PRNG fix
Under certain conditions an OpenSSL 1.0.2 client can complete a handshake
with an unseeded PRNG. The conditions are:
- The client is on a platform where the PRNG has not been seeded
automatically, and the user has not seeded manually
- A protocol specific client method version has been used (i.e. not
SSL_client_methodv23)
- A ciphersuite is used that does not require additional random data from
the PRNG beyond the initial ClientHello client random (e.g. PSK-RC4-SHA).
If the handshake succeeds then the client random that has been used will
have been generated from a PRNG with insufficient entropy and therefore the
output may be predictable.
For example using the following command with an unseeded openssl will
succeed on an unpatched platform:
openssl s_client -psk 1a2b3c4d -tls1_2 -cipher PSK-RC4-SHA
(CVE-2015-0285)
[Matt Caswell]
*) Use After Free following d2i_ECPrivatekey error fix
A malformed EC private key file consumed via the d2i_ECPrivateKey function
could cause a use after free condition. This, in turn, could cause a double
free in several private key parsing functions (such as d2i_PrivateKey
or EVP_PKCS82PKEY) and could lead to a DoS attack or memory corruption
for applications that receive EC private keys from untrusted
sources. This scenario is considered rare.
This issue was discovered by the BoringSSL project and fixed in their
commit 517073cd4b.
(CVE-2015-0209)
[Matt Caswell]
*) X509_to_X509_REQ NULL pointer deref fix
The function X509_to_X509_REQ will crash with a NULL pointer dereference if
the certificate key is invalid. This function is rarely used in practice.
This issue was discovered by Brian Carpenter.
(CVE-2015-0288)
[Stephen Henson]
*) Removed the export ciphers from the DEFAULT ciphers
[Kurt Roeckx]
Changes between 1.0.1l and 1.0.2 [22 Jan 2015]
*) Facilitate "universal" ARM builds targeting range of ARM ISAs, e.g.
ARMv5 through ARMv8, as opposite to "locking" it to single one.
So far those who have to target multiple platforms would compromise
and argue that binary targeting say ARMv5 would still execute on
ARMv8. "Universal" build resolves this compromise by providing
near-optimal performance even on newer platforms.
[Andy Polyakov]
*) Accelerated NIST P-256 elliptic curve implementation for x86_64
(other platforms pending).
[Shay Gueron & Vlad Krasnov (Intel Corp), Andy Polyakov]
*) Add support for the SignedCertificateTimestampList certificate and
OCSP response extensions from RFC6962.
[Rob Stradling]
*) Fix ec_GFp_simple_points_make_affine (thus, EC_POINTs_mul etc.)
for corner cases. (Certain input points at infinity could lead to
bogus results, with non-infinity inputs mapped to infinity too.)
[Bodo Moeller]
*) Initial support for PowerISA 2.0.7, first implemented in POWER8.
This covers AES, SHA256/512 and GHASH. "Initial" means that most
common cases are optimized and there still is room for further
improvements. Vector Permutation AES for Altivec is also added.
[Andy Polyakov]
*) Add support for little-endian ppc64 Linux target.
[Marcelo Cerri (IBM)]
*) Initial support for AMRv8 ISA crypto extensions. This covers AES,
SHA1, SHA256 and GHASH. "Initial" means that most common cases
are optimized and there still is room for further improvements.
Both 32- and 64-bit modes are supported.
[Andy Polyakov, Ard Biesheuvel (Linaro)]
*) Improved ARMv7 NEON support.
[Andy Polyakov]
*) Support for SPARC Architecture 2011 crypto extensions, first
implemented in SPARC T4. This covers AES, DES, Camellia, SHA1,
SHA256/512, MD5, GHASH and modular exponentiation.
[Andy Polyakov, David Miller]
*) Accelerated modular exponentiation for Intel processors, a.k.a.
RSAZ.
[Shay Gueron & Vlad Krasnov (Intel Corp)]
*) Support for new and upcoming Intel processors, including AVX2,
BMI and SHA ISA extensions. This includes additional "stitched"
implementations, AESNI-SHA256 and GCM, and multi-buffer support
for TLS encrypt.
This work was sponsored by Intel Corp.
[Andy Polyakov]
*) Support for DTLS 1.2. This adds two sets of DTLS methods: DTLS_*_method()
supports both DTLS 1.2 and 1.0 and should use whatever version the peer
supports and DTLSv1_2_*_method() which supports DTLS 1.2 only.
[Steve Henson]
2014-08-02 00:18:52 +08:00
*) Use algorithm specific chains in SSL_CTX_use_certificate_chain_file():
this fixes a limitation in previous versions of OpenSSL.
2014-08-02 00:18:52 +08:00
[Steve Henson]
*) Extended RSA OAEP support via EVP_PKEY API. Options to specify digest,
MGF1 digest and OAEP label.
[Steve Henson]
*) Add EVP support for key wrapping algorithms, to avoid problems with
existing code the flag EVP_CIPHER_CTX_WRAP_ALLOW has to be set in
the EVP_CIPHER_CTX or an error is returned. Add AES and DES3 wrap
algorithms and include tests cases.
[Steve Henson]
*) Add functions to allocate and set the fields of an ECDSA_METHOD
structure.
[Douglas E. Engert, Steve Henson]
*) New functions OPENSSL_gmtime_diff and ASN1_TIME_diff to find the
difference in days and seconds between two tm or ASN1_TIME structures.
[Steve Henson]
*) Add -rev test option to s_server to just reverse order of characters
received by client and send back to server. Also prints an abbreviated
summary of the connection parameters.
[Steve Henson]
*) New option -brief for s_client and s_server to print out a brief summary
of connection parameters.
[Steve Henson]
*) Add callbacks for arbitrary TLS extensions.
[Trevor Perrin <trevp@trevp.net> and Ben Laurie]
*) New option -crl_download in several openssl utilities to download CRLs
from CRLDP extension in certificates.
[Steve Henson]
*) New options -CRL and -CRLform for s_client and s_server for CRLs.
[Steve Henson]
*) New function X509_CRL_diff to generate a delta CRL from the difference
of two full CRLs. Add support to "crl" utility.
[Steve Henson]
*) New functions to set lookup_crls function and to retrieve
X509_STORE from X509_STORE_CTX.
[Steve Henson]
*) Print out deprecated issuer and subject unique ID fields in
certificates.
[Steve Henson]
*) Extend OCSP I/O functions so they can be used for simple general purpose
HTTP as well as OCSP. New wrapper function which can be used to download
CRLs using the OCSP API.
[Steve Henson]
*) Delegate command line handling in s_client/s_server to SSL_CONF APIs.
[Steve Henson]
*) SSL_CONF* functions. These provide a common framework for application
configuration using configuration files or command lines.
[Steve Henson]
*) SSL/TLS tracing code. This parses out SSL/TLS records using the
message callback and prints the results. Needs compile time option
"enable-ssl-trace". New options to s_client and s_server to enable
tracing.
[Steve Henson]
*) New ctrl and macro to retrieve supported points extensions.
Print out extension in s_server and s_client.
[Steve Henson]
*) New functions to retrieve certificate signature and signature
OID NID.
[Steve Henson]
*) Add functions to retrieve and manipulate the raw cipherlist sent by a
client to OpenSSL.
[Steve Henson]
*) New Suite B modes for TLS code. These use and enforce the requirements
of RFC6460: restrict ciphersuites, only permit Suite B algorithms and
only use Suite B curves. The Suite B modes can be set by using the
strings "SUITEB128", "SUITEB192" or "SUITEB128ONLY" for the cipherstring.
[Steve Henson]
*) New chain verification flags for Suite B levels of security. Check
algorithms are acceptable when flags are set in X509_verify_cert.
[Steve Henson]
*) Make tls1_check_chain return a set of flags indicating checks passed
by a certificate chain. Add additional tests to handle client
certificates: checks for matching certificate type and issuer name
comparison.
[Steve Henson]
*) If an attempt is made to use a signature algorithm not in the peer
preference list abort the handshake. If client has no suitable
signature algorithms in response to a certificate request do not
use the certificate.
[Steve Henson]
*) If server EC tmp key is not in client preference list abort handshake.
[Steve Henson]
*) Add support for certificate stores in CERT structure. This makes it
possible to have different stores per SSL structure or one store in
the parent SSL_CTX. Include distinct stores for certificate chain
verification and chain building. New ctrl SSL_CTRL_BUILD_CERT_CHAIN
to build and store a certificate chain in CERT structure: returning
an error if the chain cannot be built: this will allow applications
to test if a chain is correctly configured.
Note: if the CERT based stores are not set then the parent SSL_CTX
store is used to retain compatibility with existing behaviour.
[Steve Henson]
*) New function ssl_set_client_disabled to set a ciphersuite disabled
mask based on the current session, check mask when sending client
hello and checking the requested ciphersuite.
[Steve Henson]
*) New ctrls to retrieve and set certificate types in a certificate
request message. Print out received values in s_client. If certificate
types is not set with custom values set sensible values based on
supported signature algorithms.
[Steve Henson]
*) Support for distinct client and server supported signature algorithms.
[Steve Henson]
*) Add certificate callback. If set this is called whenever a certificate
is required by client or server. An application can decide which
certificate chain to present based on arbitrary criteria: for example
supported signature algorithms. Add very simple example to s_server.
This fixes many of the problems and restrictions of the existing client
certificate callback: for example you can now clear an existing
certificate and specify the whole chain.
[Steve Henson]
*) Add new "valid_flags" field to CERT_PKEY structure which determines what
the certificate can be used for (if anything). Set valid_flags field
in new tls1_check_chain function. Simplify ssl_set_cert_masks which used
to have similar checks in it.
Add new "cert_flags" field to CERT structure and include a "strict mode".
This enforces some TLS certificate requirements (such as only permitting
certificate signature algorithms contained in the supported algorithms
extension) which some implementations ignore: this option should be used
with caution as it could cause interoperability issues.
[Steve Henson]
*) Update and tidy signature algorithm extension processing. Work out
shared signature algorithms based on preferences and peer algorithms
and print them out in s_client and s_server. Abort handshake if no
shared signature algorithms.
[Steve Henson]
*) Add new functions to allow customised supported signature algorithms
for SSL and SSL_CTX structures. Add options to s_client and s_server
to support them.
[Steve Henson]
*) New function SSL_certs_clear() to delete all references to certificates
from an SSL structure. Before this once a certificate had been added
it couldn't be removed.
[Steve Henson]
*) Integrate hostname, email address and IP address checking with certificate
verification. New verify options supporting checking in openssl utility.
[Steve Henson]
*) Fixes and wildcard matching support to hostname and email checking
functions. Add manual page.
[Florian Weimer (Red Hat Product Security Team)]
*) New functions to check a hostname email or IP address against a
certificate. Add options x509 utility to print results of checks against
a certificate.
[Steve Henson]
*) Fix OCSP checking.
[Rob Stradling <rob.stradling@comodo.com> and Ben Laurie]
*) Initial experimental support for explicitly trusted non-root CAs.
OpenSSL still tries to build a complete chain to a root but if an
intermediate CA has a trust setting included that is used. The first
setting is used: whether to trust (e.g., -addtrust option to the x509
utility) or reject.
[Steve Henson]
*) Add -trusted_first option which attempts to find certificates in the
trusted store even if an untrusted chain is also supplied.
[Steve Henson]
2012-08-29 22:14:05 +08:00
2012-09-20 04:58:07 +08:00
*) MIPS assembly pack updates: support for MIPS32r2 and SmartMIPS ASE,
platform support for Linux and Android.
[Andy Polyakov]
2012-08-29 22:14:05 +08:00
*) Support for linux-x32, ILP32 environment in x86_64 framework.
[Andy Polyakov]
*) Experimental multi-implementation support for FIPS capable OpenSSL.
When in FIPS mode the approved implementations are used as normal,
when not in FIPS mode the internal unapproved versions are used instead.
This means that the FIPS capable OpenSSL isn't forced to use the
(often lower performance) FIPS implementations outside FIPS mode.
2012-08-29 22:14:05 +08:00
[Steve Henson]
*) Transparently support X9.42 DH parameters when calling
PEM_read_bio_DHparameters. This means existing applications can handle
the new parameter format automatically.
[Steve Henson]
*) Initial experimental support for X9.42 DH parameter format: mainly
to support use of 'q' parameter for RFC5114 parameters.
[Steve Henson]
*) Add DH parameters from RFC5114 including test data to dhtest.
[Steve Henson]
*) Support for automatic EC temporary key parameter selection. If enabled
the most preferred EC parameters are automatically used instead of
hardcoded fixed parameters. Now a server just has to call:
SSL_CTX_set_ecdh_auto(ctx, 1) and the server will automatically
support ECDH and use the most appropriate parameters.
[Steve Henson]
*) Enhance and tidy EC curve and point format TLS extension code. Use
static structures instead of allocation if default values are used.
New ctrls to set curves we wish to support and to retrieve shared curves.
Print out shared curves in s_server. New options to s_server and s_client
to set list of supported curves.
[Steve Henson]
*) New ctrls to retrieve supported signature algorithms and
supported curve values as an array of NIDs. Extend openssl utility
to print out received values.
[Steve Henson]
*) Add new APIs EC_curve_nist2nid and EC_curve_nid2nist which convert
between NIDs and the more common NIST names such as "P-256". Enhance
ecparam utility and ECC method to recognise the NIST names for curves.
[Steve Henson]
*) Enhance SSL/TLS certificate chain handling to support different
chains for each certificate instead of one chain in the parent SSL_CTX.
[Steve Henson]
*) Support for fixed DH ciphersuite client authentication: where both
server and client use DH certificates with common parameters.
[Steve Henson]
*) Support for fixed DH ciphersuites: those requiring DH server
certificates.
[Steve Henson]
*) New function i2d_re_X509_tbs for re-encoding the TBS portion of
the certificate.
Note: Related 1.0.2-beta specific macros X509_get_cert_info,
X509_CINF_set_modified, X509_CINF_get_issuer, X509_CINF_get_extensions and
X509_CINF_get_signature were reverted post internal team review.
Changes between 1.0.1k and 1.0.1l [15 Jan 2015]
*) Build fixes for the Windows and OpenVMS platforms
[Matt Caswell and Richard Levitte]
Changes between 1.0.1j and 1.0.1k [8 Jan 2015]
*) Fix DTLS segmentation fault in dtls1_get_record. A carefully crafted DTLS
message can cause a segmentation fault in OpenSSL due to a NULL pointer
dereference. This could lead to a Denial Of Service attack. Thanks to
Markus Stenberg of Cisco Systems, Inc. for reporting this issue.
(CVE-2014-3571)
[Steve Henson]
*) Fix DTLS memory leak in dtls1_buffer_record. A memory leak can occur in the
dtls1_buffer_record function under certain conditions. In particular this
could occur if an attacker sent repeated DTLS records with the same
sequence number but for the next epoch. The memory leak could be exploited
by an attacker in a Denial of Service attack through memory exhaustion.
Thanks to Chris Mueller for reporting this issue.
(CVE-2015-0206)
[Matt Caswell]
*) Fix issue where no-ssl3 configuration sets method to NULL. When openssl is
built with the no-ssl3 option and a SSL v3 ClientHello is received the ssl
method would be set to NULL which could later result in a NULL pointer
dereference. Thanks to Frank Schmirler for reporting this issue.
(CVE-2014-3569)
[Kurt Roeckx]
*) Abort handshake if server key exchange message is omitted for ephemeral
ECDH ciphersuites.
Thanks to Karthikeyan Bhargavan of the PROSECCO team at INRIA for
reporting this issue.
(CVE-2014-3572)
[Steve Henson]
*) Remove non-export ephemeral RSA code on client and server. This code
violated the TLS standard by allowing the use of temporary RSA keys in
non-export ciphersuites and could be used by a server to effectively
downgrade the RSA key length used to a value smaller than the server
certificate. Thanks for Karthikeyan Bhargavan of the PROSECCO team at
INRIA or reporting this issue.
(CVE-2015-0204)
[Steve Henson]
*) Fixed issue where DH client certificates are accepted without verification.
An OpenSSL server will accept a DH certificate for client authentication
without the certificate verify message. This effectively allows a client to
authenticate without the use of a private key. This only affects servers
which trust a client certificate authority which issues certificates
containing DH keys: these are extremely rare and hardly ever encountered.
Thanks for Karthikeyan Bhargavan of the PROSECCO team at INRIA or reporting
this issue.
(CVE-2015-0205)
[Steve Henson]
*) Ensure that the session ID context of an SSL is updated when its
SSL_CTX is updated via SSL_set_SSL_CTX.
The session ID context is typically set from the parent SSL_CTX,
and can vary with the CTX.
[Adam Langley]
*) Fix various certificate fingerprint issues.
By using non-DER or invalid encodings outside the signed portion of a
certificate the fingerprint can be changed without breaking the signature.
Although no details of the signed portion of the certificate can be changed
this can cause problems with some applications: e.g. those using the
certificate fingerprint for blacklists.
1. Reject signatures with non zero unused bits.
If the BIT STRING containing the signature has non zero unused bits reject
the signature. All current signature algorithms require zero unused bits.
2. Check certificate algorithm consistency.
Check the AlgorithmIdentifier inside TBS matches the one in the
certificate signature. NB: this will result in signature failure
errors for some broken certificates.
Thanks to Konrad Kraszewski from Google for reporting this issue.
3. Check DSA/ECDSA signatures use DER.
Re-encode DSA/ECDSA signatures and compare with the original received
signature. Return an error if there is a mismatch.
This will reject various cases including garbage after signature
(thanks to Antti Karjalainen and Tuomo Untinen from the Codenomicon CROSS
program for discovering this case) and use of BER or invalid ASN.1 INTEGERs
(negative or with leading zeroes).
Further analysis was conducted and fixes were developed by Stephen Henson
of the OpenSSL core team.
(CVE-2014-8275)
[Steve Henson]
*) Correct Bignum squaring. Bignum squaring (BN_sqr) may produce incorrect
results on some platforms, including x86_64. This bug occurs at random
with a very low probability, and is not known to be exploitable in any
way, though its exact impact is difficult to determine. Thanks to Pieter
Wuille (Blockstream) who reported this issue and also suggested an initial
fix. Further analysis was conducted by the OpenSSL development team and
Adam Langley of Google. The final fix was developed by Andy Polyakov of
the OpenSSL core team.
(CVE-2014-3570)
[Andy Polyakov]
*) Do not resume sessions on the server if the negotiated protocol
version does not match the session's version. Resuming with a different
version, while not strictly forbidden by the RFC, is of questionable
sanity and breaks all known clients.
[David Benjamin, Emilia Käsper]
*) Tighten handling of the ChangeCipherSpec (CCS) message: reject
early CCS messages during renegotiation. (Note that because
renegotiation is encrypted, this early CCS was not exploitable.)
[Emilia Käsper]
*) Tighten client-side session ticket handling during renegotiation:
ensure that the client only accepts a session ticket if the server sends
the extension anew in the ServerHello. Previously, a TLS client would
reuse the old extension state and thus accept a session ticket if one was
announced in the initial ServerHello.
Similarly, ensure that the client requires a session ticket if one
was advertised in the ServerHello. Previously, a TLS client would
ignore a missing NewSessionTicket message.
[Emilia Käsper]
Changes between 1.0.1i and 1.0.1j [15 Oct 2014]
*) SRTP Memory Leak.
A flaw in the DTLS SRTP extension parsing code allows an attacker, who
sends a carefully crafted handshake message, to cause OpenSSL to fail
to free up to 64k of memory causing a memory leak. This could be
exploited in a Denial Of Service attack. This issue affects OpenSSL
1.0.1 server implementations for both SSL/TLS and DTLS regardless of
whether SRTP is used or configured. Implementations of OpenSSL that
have been compiled with OPENSSL_NO_SRTP defined are not affected.
The fix was developed by the OpenSSL team.
(CVE-2014-3513)
[OpenSSL team]
*) Session Ticket Memory Leak.
When an OpenSSL SSL/TLS/DTLS server receives a session ticket the
integrity of that ticket is first verified. In the event of a session
ticket integrity check failing, OpenSSL will fail to free memory
causing a memory leak. By sending a large number of invalid session
tickets an attacker could exploit this issue in a Denial Of Service
attack.
(CVE-2014-3567)
[Steve Henson]
*) Build option no-ssl3 is incomplete.
When OpenSSL is configured with "no-ssl3" as a build option, servers
could accept and complete a SSL 3.0 handshake, and clients could be
configured to send them.
(CVE-2014-3568)
[Akamai and the OpenSSL team]
*) Add support for TLS_FALLBACK_SCSV.
Client applications doing fallback retries should call
SSL_set_mode(s, SSL_MODE_SEND_FALLBACK_SCSV).
(CVE-2014-3566)
[Adam Langley, Bodo Moeller]
2014-08-02 00:18:52 +08:00
*) Add additional DigestInfo checks.
Re-encode DigestInto in DER and check against the original when
verifying RSA signature: this will reject any improperly encoded
DigestInfo structures.
Note: this is a precautionary measure and no attacks are currently known.
[Steve Henson]
Changes between 1.0.1h and 1.0.1i [6 Aug 2014]
*) Fix SRP buffer overrun vulnerability. Invalid parameters passed to the
SRP code can be overrun an internal buffer. Add sanity check that
g, A, B < N to SRP code.
Thanks to Sean Devlin and Watson Ladd of Cryptography Services, NCC
Group for discovering this issue.
(CVE-2014-3512)
[Steve Henson]
*) A flaw in the OpenSSL SSL/TLS server code causes the server to negotiate
TLS 1.0 instead of higher protocol versions when the ClientHello message
is badly fragmented. This allows a man-in-the-middle attacker to force a
downgrade to TLS 1.0 even if both the server and the client support a
higher protocol version, by modifying the client's TLS records.
Thanks to David Benjamin and Adam Langley (Google) for discovering and
researching this issue.
(CVE-2014-3511)
[David Benjamin]
*) OpenSSL DTLS clients enabling anonymous (EC)DH ciphersuites are subject
to a denial of service attack. A malicious server can crash the client
with a null pointer dereference (read) by specifying an anonymous (EC)DH
ciphersuite and sending carefully crafted handshake messages.
Thanks to Felix Gröbert (Google) for discovering and researching this
issue.
(CVE-2014-3510)
[Emilia Käsper]
*) By sending carefully crafted DTLS packets an attacker could cause openssl
to leak memory. This can be exploited through a Denial of Service attack.
Thanks to Adam Langley for discovering and researching this issue.
(CVE-2014-3507)
[Adam Langley]
*) An attacker can force openssl to consume large amounts of memory whilst
processing DTLS handshake messages. This can be exploited through a
Denial of Service attack.
Thanks to Adam Langley for discovering and researching this issue.
(CVE-2014-3506)
[Adam Langley]
*) An attacker can force an error condition which causes openssl to crash
whilst processing DTLS packets due to memory being freed twice. This
can be exploited through a Denial of Service attack.
Thanks to Adam Langley and Wan-Teh Chang for discovering and researching
this issue.
(CVE-2014-3505)
[Adam Langley]
*) If a multithreaded client connects to a malicious server using a resumed
session and the server sends an ec point format extension it could write
up to 255 bytes to freed memory.
Thanks to Gabor Tyukasz (LogMeIn Inc) for discovering and researching this
issue.
(CVE-2014-3509)
[Gabor Tyukasz]
*) A malicious server can crash an OpenSSL client with a null pointer
dereference (read) by specifying an SRP ciphersuite even though it was not
properly negotiated with the client. This can be exploited through a
Denial of Service attack.
Thanks to Joonas Kuorilehto and Riku Hietamäki (Codenomicon) for
discovering and researching this issue.
(CVE-2014-5139)
[Steve Henson]
*) A flaw in OBJ_obj2txt may cause pretty printing functions such as
X509_name_oneline, X509_name_print_ex et al. to leak some information
from the stack. Applications may be affected if they echo pretty printing
output to the attacker.
Thanks to Ivan Fratric (Google) for discovering this issue.
(CVE-2014-3508)
[Emilia Käsper, and Steve Henson]
*) Fix ec_GFp_simple_points_make_affine (thus, EC_POINTs_mul etc.)
for corner cases. (Certain input points at infinity could lead to
bogus results, with non-infinity inputs mapped to infinity too.)
[Bodo Moeller]
Changes between 1.0.1g and 1.0.1h [5 Jun 2014]
2014-08-02 00:18:52 +08:00
*) Fix for SSL/TLS MITM flaw. An attacker using a carefully crafted
handshake can force the use of weak keying material in OpenSSL
SSL/TLS clients and servers.
Thanks to KIKUCHI Masashi (Lepidum Co. Ltd.) for discovering and
researching this issue. (CVE-2014-0224)
[KIKUCHI Masashi, Steve Henson]
*) Fix DTLS recursion flaw. By sending an invalid DTLS handshake to an
OpenSSL DTLS client the code can be made to recurse eventually crashing
in a DoS attack.
Thanks to Imre Rad (Search-Lab Ltd.) for discovering this issue.
(CVE-2014-0221)
[Imre Rad, Steve Henson]
*) Fix DTLS invalid fragment vulnerability. A buffer overrun attack can
be triggered by sending invalid DTLS fragments to an OpenSSL DTLS
client or server. This is potentially exploitable to run arbitrary
code on a vulnerable client or server.
Thanks to Jüri Aedla for reporting this issue. (CVE-2014-0195)
[Jüri Aedla, Steve Henson]
2014-08-02 00:18:52 +08:00
*) Fix bug in TLS code where clients enable anonymous ECDH ciphersuites
are subject to a denial of service attack.
Thanks to Felix Gröbert and Ivan Fratric at Google for discovering
2014-08-02 00:18:52 +08:00
this issue. (CVE-2014-3470)
[Felix Gröbert, Ivan Fratric, Steve Henson]
2014-08-02 00:18:52 +08:00
*) Harmonize version and its documentation. -f flag is used to display
compilation flags.
[mancha <mancha1@zoho.com>]
*) Fix eckey_priv_encode so it immediately returns an error upon a failure
in i2d_ECPrivateKey.
[mancha <mancha1@zoho.com>]
*) Fix some double frees. These are not thought to be exploitable.
[mancha <mancha1@zoho.com>]
Changes between 1.0.1f and 1.0.1g [7 Apr 2014]
*) A missing bounds check in the handling of the TLS heartbeat extension
can be used to reveal up to 64k of memory to a connected client or
server.
Thanks for Neel Mehta of Google Security for discovering this bug and to
Adam Langley <agl@chromium.org> and Bodo Moeller <bmoeller@acm.org> for
preparing the fix (CVE-2014-0160)
[Adam Langley, Bodo Moeller]
*) Fix for the attack described in the paper "Recovering OpenSSL
ECDSA Nonces Using the FLUSH+RELOAD Cache Side-channel Attack"
by Yuval Yarom and Naomi Benger. Details can be obtained from:
http://eprint.iacr.org/2014/140
Thanks to Yuval Yarom and Naomi Benger for discovering this
flaw and to Yuval Yarom for supplying a fix (CVE-2014-0076)
[Yuval Yarom and Naomi Benger]
*) TLS pad extension: draft-agl-tls-padding-03
Workaround for the "TLS hang bug" (see FAQ and PR#2771): if the
TLS client Hello record length value would otherwise be > 255 and
less that 512 pad with a dummy extension containing zeroes so it
is at least 512 bytes long.
[Adam Langley, Steve Henson]
Changes between 1.0.1e and 1.0.1f [6 Jan 2014]
*) Fix for TLS record tampering bug. A carefully crafted invalid
handshake could crash OpenSSL with a NULL pointer exception.
Thanks to Anton Johansson for reporting this issues.
(CVE-2013-4353)
*) Keep original DTLS digest and encryption contexts in retransmission
structures so we can use the previous session parameters if they need
to be resent. (CVE-2013-6450)
[Steve Henson]
*) Add option SSL_OP_SAFARI_ECDHE_ECDSA_BUG (part of SSL_OP_ALL) which
avoids preferring ECDHE-ECDSA ciphers when the client appears to be
Safari on OS X. Safari on OS X 10.8..10.8.3 advertises support for
several ECDHE-ECDSA ciphers, but fails to negotiate them. The bug
is fixed in OS X 10.8.4, but Apple have ruled out both hot fixing
10.8..10.8.3 and forcing users to upgrade to 10.8.4 or newer.
[Rob Stradling, Adam Langley]
Changes between 1.0.1d and 1.0.1e [11 Feb 2013]
*) Correct fix for CVE-2013-0169. The original didn't work on AES-NI
supporting platforms or when small records were transferred.
[Andy Polyakov, Steve Henson]
Changes between 1.0.1c and 1.0.1d [5 Feb 2013]
*) Make the decoding of SSLv3, TLS and DTLS CBC records constant time.
This addresses the flaw in CBC record processing discovered by
Nadhem Alfardan and Kenny Paterson. Details of this attack can be found
at: http://www.isg.rhul.ac.uk/tls/
Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
Security Group at Royal Holloway, University of London
(www.isg.rhul.ac.uk) for discovering this flaw and Adam Langley and
Emilia Käsper for the initial patch.
(CVE-2013-0169)
[Emilia Käsper, Adam Langley, Ben Laurie, Andy Polyakov, Steve Henson]
*) Fix flaw in AESNI handling of TLS 1.2 and 1.1 records for CBC mode
ciphersuites which can be exploited in a denial of service attack.
Thanks go to and to Adam Langley <agl@chromium.org> for discovering
and detecting this bug and to Wolfgang Ettlinger
<wolfgang.ettlinger@gmail.com> for independently discovering this issue.
(CVE-2012-2686)
[Adam Langley]
*) Return an error when checking OCSP signatures when key is NULL.
This fixes a DoS attack. (CVE-2013-0166)
[Steve Henson]
*) Make openssl verify return errors.
[Chris Palmer <palmer@google.com> and Ben Laurie]
*) Call OCSP Stapling callback after ciphersuite has been chosen, so
the right response is stapled. Also change SSL_get_certificate()
so it returns the certificate actually sent.
See http://rt.openssl.org/Ticket/Display.html?id=2836.
[Rob Stradling <rob.stradling@comodo.com>]
*) Fix possible deadlock when decoding public keys.
[Steve Henson]
*) Don't use TLS 1.0 record version number in initial client hello
if renegotiating.
[Steve Henson]
Changes between 1.0.1b and 1.0.1c [10 May 2012]
*) Sanity check record length before skipping explicit IV in TLS
1.2, 1.1 and DTLS to fix DoS attack.
Thanks to Codenomicon for discovering this issue using Fuzz-o-Matic
fuzzing as a service testing platform.
(CVE-2012-2333)
[Steve Henson]
*) Initialise tkeylen properly when encrypting CMS messages.
Thanks to Solar Designer of Openwall for reporting this issue.
[Steve Henson]
2012-08-29 22:14:05 +08:00
*) In FIPS mode don't try to use composite ciphers as they are not
approved.
[Steve Henson]
2012-08-29 22:14:05 +08:00
Changes between 1.0.1a and 1.0.1b [26 Apr 2012]
2012-08-29 22:14:05 +08:00
2012-04-26 15:20:06 +08:00
*) OpenSSL 1.0.0 sets SSL_OP_ALL to 0x80000FFFL and OpenSSL 1.0.1 and
1.0.1a set SSL_OP_NO_TLSv1_1 to 0x00000400L which would unfortunately
mean any application compiled against OpenSSL 1.0.0 headers setting
SSL_OP_ALL would also set SSL_OP_NO_TLSv1_1, unintentionally disablng
2012-04-26 15:20:06 +08:00
TLS 1.1 also. Fix this by changing the value of SSL_OP_NO_TLSv1_1 to
0x10000000L Any application which was previously compiled against
OpenSSL 1.0.1 or 1.0.1a headers and which cares about SSL_OP_NO_TLSv1_1
2012-04-26 15:20:06 +08:00
will need to be recompiled as a result. Letting be results in
inability to disable specifically TLS 1.1 and in client context,
in unlike event, limit maximum offered version to TLS 1.0 [see below].
[Steve Henson]
*) In order to ensure interoperabilty SSL_OP_NO_protocolX does not
disable just protocol X, but all protocols above X *if* there are
protocols *below* X still enabled. In more practical terms it means
that if application wants to disable TLS1.0 in favor of TLS1.1 and
above, it's not sufficient to pass SSL_OP_NO_TLSv1, one has to pass
2012-04-26 15:33:26 +08:00
SSL_OP_NO_TLSv1|SSL_OP_NO_SSLv3|SSL_OP_NO_SSLv2. This applies to
client side.
[Andy Polyakov]
Changes between 1.0.1 and 1.0.1a [19 Apr 2012]
*) Check for potentially exploitable overflows in asn1_d2i_read_bio
BUF_mem_grow and BUF_mem_grow_clean. Refuse attempts to shrink buffer
in CRYPTO_realloc_clean.
Thanks to Tavis Ormandy, Google Security Team, for discovering this
issue and to Adam Langley <agl@chromium.org> for fixing it.
(CVE-2012-2110)
[Adam Langley (Google), Tavis Ormandy, Google Security Team]
*) Don't allow TLS 1.2 SHA-256 ciphersuites in TLS 1.0, 1.1 connections.
[Adam Langley]
*) Workarounds for some broken servers that "hang" if a client hello
record length exceeds 255 bytes.
1. Do not use record version number > TLS 1.0 in initial client
hello: some (but not all) hanging servers will now work.
2. If we set OPENSSL_MAX_TLS1_2_CIPHER_LENGTH this will truncate
the number of ciphers sent in the client hello. This should be
set to an even number, such as 50, for example by passing:
-DOPENSSL_MAX_TLS1_2_CIPHER_LENGTH=50 to config or Configure.
Most broken servers should now work.
3. If all else fails setting OPENSSL_NO_TLS1_2_CLIENT will disable
TLS 1.2 client support entirely.
[Steve Henson]
*) Fix SEGV in Vector Permutation AES module observed in OpenSSH.
[Andy Polyakov]
Changes between 1.0.0h and 1.0.1 [14 Mar 2012]
*) Add compatibility with old MDC2 signatures which use an ASN1 OCTET
STRING form instead of a DigestInfo.
[Steve Henson]
*) The format used for MDC2 RSA signatures is inconsistent between EVP
and the RSA_sign/RSA_verify functions. This was made more apparent when
OpenSSL used RSA_sign/RSA_verify for some RSA signatures in particular
those which went through EVP_PKEY_METHOD in 1.0.0 and later. Detect
the correct format in RSA_verify so both forms transparently work.
[Steve Henson]
*) Some servers which support TLS 1.0 can choke if we initially indicate
support for TLS 1.2 and later renegotiate using TLS 1.0 in the RSA
encrypted premaster secret. As a workaround use the maximum permitted
client version in client hello, this should keep such servers happy
and still work with previous versions of OpenSSL.
[Steve Henson]
*) Add support for TLS/DTLS heartbeats.
[Robin Seggelmann <seggelmann@fh-muenster.de>]
2012-01-01 07:08:15 +08:00
*) Add support for SCTP.
[Robin Seggelmann <seggelmann@fh-muenster.de>]
*) Improved PRNG seeding for VOS.
[Paul Green <Paul.Green@stratus.com>]
2011-12-19 22:48:49 +08:00
*) Extensive assembler packs updates, most notably:
- x86[_64]: AES-NI, PCLMULQDQ, RDRAND support;
- x86[_64]: SSSE3 support (SHA1, vector-permutation AES);
- x86_64: bit-sliced AES implementation;
- ARM: NEON support, contemporary platforms optimizations;
- s390x: z196 support;
- *: GHASH and GF(2^m) multiplication implementations;
[Andy Polyakov]
2011-12-19 22:41:03 +08:00
*) Make TLS-SRP code conformant with RFC 5054 API cleanup
(removal of unnecessary code)
[Peter Sylvester <peter.sylvester@edelweb.fr>]
2011-12-02 20:28:20 +08:00
*) Add TLS key material exporter from RFC 5705.
[Eric Rescorla]
*) Add DTLS-SRTP negotiation from RFC 5764.
[Eric Rescorla]
*) Add Next Protocol Negotiation,
http://tools.ietf.org/html/draft-agl-tls-nextprotoneg-00. Can be
disabled with a no-npn flag to config or Configure. Code donated
by Google.
[Adam Langley <agl@google.com> and Ben Laurie]
*) Add optional 64-bit optimized implementations of elliptic curves NIST-P224,
NIST-P256, NIST-P521, with constant-time single point multiplication on
typical inputs. Compiler support for the nonstandard type __uint128_t is
required to use this (present in gcc 4.4 and later, for 64-bit builds).
Code made available under Apache License version 2.0.
Specify "enable-ec_nistp_64_gcc_128" on the Configure (or config) command
line to include this in your build of OpenSSL, and run "make depend" (or
"make update"). This enables the following EC_METHODs:
EC_GFp_nistp224_method()
EC_GFp_nistp256_method()
EC_GFp_nistp521_method()
EC_GROUP_new_by_curve_name() will automatically use these (while
EC_GROUP_new_curve_GFp() currently prefers the more flexible
implementations).
[Emilia Käsper, Adam Langley, Bodo Moeller (Google)]
*) Use type ossl_ssize_t instad of ssize_t which isn't available on
all platforms. Move ssize_t definition from e_os.h to the public
header file e_os2.h as it now appears in public header file cms.h
[Steve Henson]
2010-03-14 20:55:15 +08:00
*) New -sigopt option to the ca, req and x509 utilities. Additional
2010-03-14 20:54:45 +08:00
signature parameters can be passed using this option and in
2010-03-14 20:55:15 +08:00
particular PSS.
2010-03-14 20:54:45 +08:00
[Steve Henson]
2010-03-11 22:19:46 +08:00
*) Add RSA PSS signing function. This will generate and set the
2010-03-11 22:06:46 +08:00
appropriate AlgorithmIdentifiers for PSS based on those in the
corresponding EVP_MD_CTX structure. No application support yet.
[Steve Henson]
*) Support for companion algorithm specific ASN1 signing routines.
New function ASN1_item_sign_ctx() signs a pre-initialised
EVP_MD_CTX structure and sets AlgorithmIdentifiers based on
the appropriate parameters.
[Steve Henson]
*) Add new algorithm specific ASN1 verification initialisation function
to EVP_PKEY_ASN1_METHOD: this is not in EVP_PKEY_METHOD since the ASN1
handling will be the same no matter what EVP_PKEY_METHOD is used.
Add a PSS handler to support verification of PSS signatures: checked
against a number of sample certificates.
[Steve Henson]
*) Add signature printing for PSS. Add PSS OIDs.
[Steve Henson, Martin Kaiser <lists@kaiser.cx>]
*) Add algorithm specific signature printing. An individual ASN1 method
can now print out signatures instead of the standard hex dump.
More complex signatures (e.g. PSS) can print out more meaningful
information. Include DSA version that prints out the signature
parameters r, s.
[Steve Henson]
2011-10-10 07:11:55 +08:00
*) Password based recipient info support for CMS library: implementing
RFC3211.
[Steve Henson]
*) Split password based encryption into PBES2 and PBKDF2 functions. This
neatly separates the code into cipher and PBE sections and is required
for some algorithms that split PBES2 into separate pieces (such as
password based CMS).
[Steve Henson]
2011-09-05 21:36:23 +08:00
*) Session-handling fixes:
- Fix handling of connections that are resuming with a session ID,
but also support Session Tickets.
- Fix a bug that suppressed issuing of a new ticket if the client
presented a ticket with an expired session.
- Try to set the ticket lifetime hint to something reasonable.
- Make tickets shorter by excluding irrelevant information.
- On the client side, don't ignore renewed tickets.
[Adam Langley, Bodo Moeller (Google)]
2011-09-05 21:31:17 +08:00
*) Fix PSK session representation.
[Bodo Moeller]
2011-09-05 17:30:50 +08:00
*) Add RC4-MD5 and AESNI-SHA1 "stitched" implementations.
This work was sponsored by Intel.
[Andy Polyakov]
2011-09-05 17:30:50 +08:00
*) Add GCM support to TLS library. Some custom code is needed to split
the IV between the fixed (from PRF) and explicit (from TLS record)
portions. This adds all GCM ciphersuites supported by RFC5288 and
RFC5289. Generalise some AES* cipherstrings to include GCM and
2011-09-05 17:30:50 +08:00
add a special AESGCM string for GCM only.
[Steve Henson]
*) Expand range of ctrls for AES GCM. Permit setting invocation
field on decrypt and retrieval of invocation field only on encrypt.
[Steve Henson]
*) Add HMAC ECC ciphersuites from RFC5289. Include SHA384 PRF support.
As required by RFC5289 these ciphersuites cannot be used if for
versions of TLS earlier than 1.2.
[Steve Henson]
*) For FIPS capable OpenSSL interpret a NULL default public key method
as unset and return the appropriate default but do *not* set the default.
This means we can return the appropriate method in applications that
switch between FIPS and non-FIPS modes.
2011-09-05 17:30:50 +08:00
[Steve Henson]
*) Redirect HMAC and CMAC operations to FIPS module in FIPS mode. If an
ENGINE is used then we cannot handle that in the FIPS module so we
keep original code iff non-FIPS operations are allowed.
[Steve Henson]
*) Add -attime option to openssl utilities.
[Peter Eckersley <pde@eff.org>, Ben Laurie and Steve Henson]
*) Redirect DSA and DH operations to FIPS module in FIPS mode.
[Steve Henson]
*) Redirect ECDSA and ECDH operations to FIPS module in FIPS mode. Also use
FIPS EC methods unconditionally for now.
[Steve Henson]
*) New build option no-ec2m to disable characteristic 2 code.
[Steve Henson]
*) Backport libcrypto audit of return value checking from 1.1.0-dev; not
all cases can be covered as some introduce binary incompatibilities.
[Steve Henson]
*) Redirect RSA operations to FIPS module including keygen,
encrypt, decrypt, sign and verify. Block use of non FIPS RSA methods.
[Steve Henson]
*) Add similar low level API blocking to ciphers.
[Steve Henson]
*) Low level digest APIs are not approved in FIPS mode: any attempt
to use these will cause a fatal error. Applications that *really* want
to use them can use the private_* version instead.
[Steve Henson]
*) Redirect cipher operations to FIPS module for FIPS builds.
[Steve Henson]
*) Redirect digest operations to FIPS module for FIPS builds.
[Steve Henson]
*) Update build system to add "fips" flag which will link in fipscanister.o
for static and shared library builds embedding a signature if needed.
[Steve Henson]
*) Output TLS supported curves in preference order instead of numerical
order. This is currently hardcoded for the highest order curves first.
This should be configurable so applications can judge speed vs strength.
[Steve Henson]
*) Add TLS v1.2 server support for client authentication.
[Steve Henson]
*) Add support for FIPS mode in ssl library: disable SSLv3, non-FIPS ciphers
and enable MD5.
[Steve Henson]
*) Functions FIPS_mode_set() and FIPS_mode() which call the underlying
FIPS modules versions.
[Steve Henson]
*) Add TLS v1.2 client side support for client authentication. Keep cache
of handshake records longer as we don't know the hash algorithm to use
until after the certificate request message is received.
[Steve Henson]
*) Initial TLS v1.2 client support. Add a default signature algorithms
extension including all the algorithms we support. Parse new signature
format in client key exchange. Relax some ECC signing restrictions for
TLS v1.2 as indicated in RFC5246.
[Steve Henson]
*) Add server support for TLS v1.2 signature algorithms extension. Switch
to new signature format when needed using client digest preference.
All server ciphersuites should now work correctly in TLS v1.2. No client
support yet and no support for client certificates.
[Steve Henson]
*) Initial TLS v1.2 support. Add new SHA256 digest to ssl code, switch
to SHA256 for PRF when using TLS v1.2 and later. Add new SHA256 based
ciphersuites. At present only RSA key exchange ciphersuites work with
TLS v1.2. Add new option for TLS v1.2 replacing the old and obsolete
SSL_OP_PKCS1_CHECK flags with SSL_OP_NO_TLSv1_2. New TLSv1.2 methods
and version checking.
[Steve Henson]
*) New option OPENSSL_NO_SSL_INTERN. If an application can be compiled
with this defined it will not be affected by any changes to ssl internal
structures. Add several utility functions to allow openssl application
to work with OPENSSL_NO_SSL_INTERN defined.
[Steve Henson]
*) Add SRP support.
[Tom Wu <tjw@cs.stanford.edu> and Ben Laurie]
*) Add functions to copy EVP_PKEY_METHOD and retrieve flags and id.
[Steve Henson]
*) Permit abbreviated handshakes when renegotiating using the function
SSL_renegotiate_abbreviated().
[Robin Seggelmann <seggelmann@fh-muenster.de>]
*) Add call to ENGINE_register_all_complete() to
ENGINE_load_builtin_engines(), so some implementations get used
automatically instead of needing explicit application support.
[Steve Henson]
*) Add support for TLS key exporter as described in RFC5705.
[Robin Seggelmann <seggelmann@fh-muenster.de>, Steve Henson]
*) Initial TLSv1.1 support. Since TLSv1.1 is very similar to TLS v1.0 only
a few changes are required:
Add SSL_OP_NO_TLSv1_1 flag.
Add TLSv1_1 methods.
Update version checking logic to handle version 1.1.
Add explicit IV handling (ported from DTLS code).
Add command line options to s_client/s_server.
[Steve Henson]
Changes between 1.0.0g and 1.0.0h [12 Mar 2012]
*) Fix MMA (Bleichenbacher's attack on PKCS #1 v1.5 RSA padding) weakness
in CMS and PKCS7 code. When RSA decryption fails use a random key for
content decryption and always return the same error. Note: this attack
needs on average 2^20 messages so it only affects automated senders. The
old behaviour can be re-enabled in the CMS code by setting the
CMS_DEBUG_DECRYPT flag: this is useful for debugging and testing where
an MMA defence is not necessary.
Thanks to Ivan Nestlerode <inestlerode@us.ibm.com> for discovering
this issue. (CVE-2012-0884)
[Steve Henson]
*) Fix CVE-2011-4619: make sure we really are receiving a
client hello before rejecting multiple SGC restarts. Thanks to
Ivan Nestlerode <inestlerode@us.ibm.com> for discovering this bug.
[Steve Henson]
Changes between 1.0.0f and 1.0.0g [18 Jan 2012]
*) Fix for DTLS DoS issue introduced by fix for CVE-2011-4109.
Thanks to Antonio Martin, Enterprise Secure Access Research and
Development, Cisco Systems, Inc. for discovering this bug and
preparing a fix. (CVE-2012-0050)
[Antonio Martin]
2012-01-05 07:54:17 +08:00
Changes between 1.0.0e and 1.0.0f [4 Jan 2012]
*) Nadhem Alfardan and Kenny Paterson have discovered an extension
of the Vaudenay padding oracle attack on CBC mode encryption
which enables an efficient plaintext recovery attack against
the OpenSSL implementation of DTLS. Their attack exploits timing
differences arising during decryption processing. A research
paper describing this attack can be found at:
http://www.isg.rhul.ac.uk/~kp/dtls.pdf
Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
Security Group at Royal Holloway, University of London
(www.isg.rhul.ac.uk) for discovering this flaw and to Robin Seggelmann
<seggelmann@fh-muenster.de> and Michael Tuexen <tuexen@fh-muenster.de>
for preparing the fix. (CVE-2011-4108)
[Robin Seggelmann, Michael Tuexen]
*) Clear bytes used for block padding of SSL 3.0 records.
(CVE-2011-4576)
[Adam Langley (Google)]
2012-01-17 22:20:32 +08:00
*) Only allow one SGC handshake restart for SSL/TLS. Thanks to George
Kadianakis <desnacked@gmail.com> for discovering this issue and
Adam Langley for preparing the fix. (CVE-2011-4619)
2012-01-05 07:10:44 +08:00
[Adam Langley (Google)]
*) Check parameters are not NULL in GOST ENGINE. (CVE-2012-0027)
[Andrey Kulikov <amdeich@gmail.com>]
*) Prevent malformed RFC3779 data triggering an assertion failure.
Thanks to Andrew Chi, BBN Technologies, for discovering the flaw
and Rob Austein <sra@hactrn.net> for fixing it. (CVE-2011-4577)
[Rob Austein <sra@hactrn.net>]
*) Improved PRNG seeding for VOS.
[Paul Green <Paul.Green@stratus.com>]
*) Fix ssl_ciph.c set-up race.
[Adam Langley (Google)]
*) Fix spurious failures in ecdsatest.c.
[Emilia Käsper (Google)]
*) Fix the BIO_f_buffer() implementation (which was mixing different
interpretations of the '..._len' fields).
[Adam Langley (Google)]
*) Fix handling of BN_BLINDING: now BN_BLINDING_invert_ex (rather than
BN_BLINDING_invert_ex) calls BN_BLINDING_update, ensuring that concurrent
threads won't reuse the same blinding coefficients.
This also avoids the need to obtain the CRYPTO_LOCK_RSA_BLINDING
lock to call BN_BLINDING_invert_ex, and avoids one use of
BN_BLINDING_update for each BN_BLINDING structure (previously,
the last update always remained unused).
[Emilia Käsper (Google)]
*) In ssl3_clear, preserve s3->init_extra along with s3->rbuf.
[Bob Buckholz (Google)]
Changes between 1.0.0d and 1.0.0e [6 Sep 2011]
*) Fix bug where CRLs with nextUpdate in the past are sometimes accepted
by initialising X509_STORE_CTX properly. (CVE-2011-3207)
[Kaspar Brand <ossl@velox.ch>]
*) Fix SSL memory handling for (EC)DH ciphersuites, in particular
for multi-threaded use of ECDH. (CVE-2011-3210)
[Adam Langley (Google)]
2011-09-05 17:57:20 +08:00
*) Fix x509_name_ex_d2i memory leak on bad inputs.
[Bodo Moeller]
*) Remove hard coded ecdsaWithSHA1 signature tests in ssl code and check
signature public key algorithm by using OID xref utilities instead.
Before this you could only use some ECC ciphersuites with SHA1 only.
[Steve Henson]
*) Add protection against ECDSA timing attacks as mentioned in the paper
by Billy Bob Brumley and Nicola Tuveri, see:
http://eprint.iacr.org/2011/232.pdf
[Billy Bob Brumley and Nicola Tuveri]
Changes between 1.0.0c and 1.0.0d [8 Feb 2011]
*) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
[Neel Mehta, Adam Langley, Bodo Moeller (Google)]
*) Fix bug in string printing code: if *any* escaping is enabled we must
escape the escape character (backslash) or the resulting string is
ambiguous.
[Steve Henson]
Changes between 1.0.0b and 1.0.0c [2 Dec 2010]
*) Disable code workaround for ancient and obsolete Netscape browsers
and servers: an attacker can use it in a ciphersuite downgrade attack.
Thanks to Martin Rex for discovering this bug. CVE-2010-4180
[Steve Henson]
*) Fixed J-PAKE implementation error, originally discovered by
Sebastien Martini, further info and confirmation from Stefan
Arentz and Feng Hao. Note that this fix is a security fix. CVE-2010-4252
[Ben Laurie]
Changes between 1.0.0a and 1.0.0b [16 Nov 2010]
*) Fix extension code to avoid race conditions which can result in a buffer
overrun vulnerability: resumed sessions must not be modified as they can
be shared by multiple threads. CVE-2010-3864
2011-02-03 19:13:29 +08:00
[Steve Henson]
*) Fix WIN32 build system to correctly link an ENGINE directory into
a DLL.
[Steve Henson]
Changes between 1.0.0 and 1.0.0a [01 Jun 2010]
*) Check return value of int_rsa_verify in pkey_rsa_verifyrecover
(CVE-2010-1633)
[Steve Henson, Peter-Michael Hager <hager@dortmund.net>]
Changes between 0.9.8n and 1.0.0 [29 Mar 2010]
*) Add "missing" function EVP_CIPHER_CTX_copy(). This copies a cipher
context. The operation can be customised via the ctrl mechanism in
case ENGINEs want to include additional functionality.
[Steve Henson]
*) Tolerate yet another broken PKCS#8 key format: private key value negative.
[Steve Henson]
*) Add new -subject_hash_old and -issuer_hash_old options to x509 utility to
output hashes compatible with older versions of OpenSSL.
[Willy Weisz <weisz@vcpc.univie.ac.at>]
*) Fix compression algorithm handling: if resuming a session use the
compression algorithm of the resumed session instead of determining
it from client hello again. Don't allow server to change algorithm.
[Steve Henson]
*) Add load_crls() function to apps tidying load_certs() too. Add option
to verify utility to allow additional CRLs to be included.
[Steve Henson]
*) Update OCSP request code to permit adding custom headers to the request:
some responders need this.
[Steve Henson]
*) The function EVP_PKEY_sign() returns <=0 on error: check return code
correctly.
[Julia Lawall <julia@diku.dk>]
*) Update verify callback code in apps/s_cb.c and apps/verify.c, it
needlessly dereferenced structures, used obsolete functions and
didn't handle all updated verify codes correctly.
[Steve Henson]
*) Disable MD2 in the default configuration.
2009-07-13 19:58:05 +08:00
[Steve Henson]
2009-06-25 19:29:30 +08:00
*) In BIO_pop() and BIO_push() use the ctrl argument (which was NULL) to
indicate the initial BIO being pushed or popped. This makes it possible
to determine whether the BIO is the one explicitly called or as a result
of the ctrl being passed down the chain. Fix BIO_pop() and SSL BIOs so
it handles reference counts correctly and doesn't zero out the I/O bio
when it is not being explicitly popped. WARNING: applications which
included workarounds for the old buggy behaviour will need to be modified
or they could free up already freed BIOs.
[Steve Henson]
*) Extend the uni2asc/asc2uni => OPENSSL_uni2asc/OPENSSL_asc2uni
renaming to all platforms (within the 0.9.8 branch, this was
done conditionally on Netware platforms to avoid a name clash).
[Guenter <lists@gknw.net>]
2009-06-01 01:13:55 +08:00
*) Add ECDHE and PSK support to DTLS.
[Michael Tuexen <tuexen@fh-muenster.de>]
2009-04-29 06:10:54 +08:00
*) Add CHECKED_STACK_OF macro to safestack.h, otherwise safestack can't
be used on C++.
[Steve Henson]
2009-04-15 23:27:03 +08:00
*) Add "missing" function EVP_MD_flags() (without this the only way to
retrieve a digest flags is by accessing the structure directly. Update
EVP_MD_do_all*() and EVP_CIPHER_do_all*() to include the name a digest
or cipher is registered as in the "from" argument. Print out all
registered digests in the dgst usage message instead of manually
attempting to work them out.
[Steve Henson]
2009-04-09 00:16:35 +08:00
*) If no SSLv2 ciphers are used don't use an SSLv2 compatible client hello:
this allows the use of compression and extensions. Change default cipher
string to remove SSLv2 ciphersuites. This effectively avoids ancient SSLv2
by default unless an application cipher string requests it.
[Steve Henson]
2009-04-03 19:45:19 +08:00
*) Alter match criteria in PKCS12_parse(). It used to try to use local
key ids to find matching certificates and keys but some PKCS#12 files
don't follow the (somewhat unwritten) rules and this strategy fails.
Now just gather all certificates together and the first private key
then look for the first certificate that matches the key.
[Steve Henson]
*) Support use of registered digest and cipher names for dgst and cipher
commands instead of having to add each one as a special case. So now
you can do:
openssl sha256 foo
as well as:
openssl dgst -sha256 foo
and this works for ENGINE based algorithms too.
[Steve Henson]
*) Update Gost ENGINE to support parameter files.
[Victor B. Wagner <vitus@cryptocom.ru>]
*) Support GeneralizedTime in ca utility.
[Oliver Martin <oliver@volatilevoid.net>, Steve Henson]
*) Enhance the hash format used for certificate directory links. The new
form uses the canonical encoding (meaning equivalent names will work
even if they aren't identical) and uses SHA1 instead of MD5. This form
is incompatible with the older format and as a result c_rehash should
be used to rebuild symbolic links.
[Steve Henson]
*) Make PKCS#8 the default write format for private keys, replacing the
traditional format. This form is standardised, more secure and doesn't
include an implicit MD5 dependency.
[Steve Henson]
*) Add a $gcc_devteam_warn option to Configure. The idea is that any code
committed to OpenSSL should pass this lot as a minimum.
[Steve Henson]
*) Add session ticket override functionality for use by EAP-FAST.
[Jouni Malinen <j@w1.fi>]
*) Modify HMAC functions to return a value. Since these can be implemented
in an ENGINE errors can occur.
[Steve Henson]
2008-10-14 16:10:52 +08:00
*) Type-checked OBJ_bsearch_ex.
[Ben Laurie]
*) Type-checked OBJ_bsearch. Also some constification necessitated
by type-checking. Still to come: TXT_DB, bsearch(?),
OBJ_bsearch_ex, qsort, CRYPTO_EX_DATA, ASN1_VALUE, ASN1_STRING,
2008-10-14 16:10:52 +08:00
CONF_VALUE.
[Ben Laurie]
*) New function OPENSSL_gmtime_adj() to add a specific number of days and
seconds to a tm structure directly, instead of going through OS
specific date routines. This avoids any issues with OS routines such
as the year 2038 bug. New *_adj() functions for ASN1 time structures
and X509_time_adj_ex() to cover the extended range. The existing
X509_time_adj() is still usable and will no longer have any date issues.
[Steve Henson]
*) Delta CRL support. New use deltas option which will attempt to locate
and search any appropriate delta CRLs available.
This work was sponsored by Google.
[Steve Henson]
*) Support for CRLs partitioned by reason code. Reorganise CRL processing
code and add additional score elements. Validate alternate CRL paths
as part of the CRL checking and indicate a new error "CRL path validation
error" in this case. Applications wanting additional details can use
the verify callback and check the new "parent" field. If this is not
NULL CRL path validation is taking place. Existing applications won't
see this because it requires extended CRL support which is off by
default.
This work was sponsored by Google.
[Steve Henson]
*) Support for freshest CRL extension.
This work was sponsored by Google.
[Steve Henson]
2008-08-21 00:42:19 +08:00
*) Initial indirect CRL support. Currently only supported in the CRLs
passed directly and not via lookup. Process certificate issuer
CRL entry extension and lookup CRL entries by bother issuer name
and serial number. Check and process CRL issuer entry in IDP extension.
2008-08-21 00:42:19 +08:00
This work was sponsored by Google.
[Steve Henson]
*) Add support for distinct certificate and CRL paths. The CRL issuer
certificate is validated separately in this case. Only enabled if
an extended CRL support flag is set: this flag will enable additional
CRL functionality in future.
This work was sponsored by Google.
[Steve Henson]
*) Add support for policy mappings extension.
This work was sponsored by Google.
[Steve Henson]
*) Fixes to pathlength constraint, self issued certificate handling,
policy processing to align with RFC3280 and PKITS tests.
This work was sponsored by Google.
[Steve Henson]
*) Support for name constraints certificate extension. DN, email, DNS
and URI types are currently supported.
This work was sponsored by Google.
[Steve Henson]
*) To cater for systems that provide a pointer-based thread ID rather
than numeric, deprecate the current numeric thread ID mechanism and
replace it with a structure and associated callback type. This
mechanism allows a numeric "hash" to be extracted from a thread ID in
either case, and on platforms where pointers are larger than 'long',
mixing is done to help ensure the numeric 'hash' is usable even if it
can't be guaranteed unique. The default mechanism is to use "&errno"
as a pointer-based thread ID to distinguish between threads.
Applications that want to provide their own thread IDs should now use
CRYPTO_THREADID_set_callback() to register a callback that will call
either CRYPTO_THREADID_set_numeric() or CRYPTO_THREADID_set_pointer().
Note that ERR_remove_state() is now deprecated, because it is tied
to the assumption that thread IDs are numeric. ERR_remove_state(0)
to free the current thread's error state should be replaced by
ERR_remove_thread_state(NULL).
(This new approach replaces the functions CRYPTO_set_idptr_callback(),
CRYPTO_get_idptr_callback(), and CRYPTO_thread_idptr() that existed in
OpenSSL 0.9.9-dev between June 2006 and August 2008. Also, if an
application was previously providing a numeric thread callback that
was inappropriate for distinguishing threads, then uniqueness might
have been obtained with &errno that happened immediately in the
intermediate development versions of OpenSSL; this is no longer the
case, the numeric thread callback will now override the automatic use
of &errno.)
[Geoff Thorpe, with help from Bodo Moeller]
*) Initial support for different CRL issuing certificates. This covers a
simple case where the self issued certificates in the chain exist and
the real CRL issuer is higher in the existing chain.
This work was sponsored by Google.
[Steve Henson]
2008-06-04 19:01:43 +08:00
*) Removed effectively defunct crypto/store from the build.
[Ben Laurie]
*) Revamp of STACK to provide stronger type-checking. Still to come:
TXT_DB, bsearch(?), OBJ_bsearch, qsort, CRYPTO_EX_DATA, ASN1_VALUE,
ASN1_STRING, CONF_VALUE.
[Ben Laurie]
2008-06-03 10:48:34 +08:00
*) Add a new SSL_MODE_RELEASE_BUFFERS mode flag to release unused buffer
RAM on SSL connections. This option can save about 34k per idle SSL.
[Nick Mathewson]
2008-05-26 19:24:29 +08:00
*) Revamp of LHASH to provide stronger type-checking. Still to come:
STACK, TXT_DB, bsearch, qsort.
[Ben Laurie]
*) Initial support for Cryptographic Message Syntax (aka CMS) based
on RFC3850, RFC3851 and RFC3852. New cms directory and cms utility,
support for data, signedData, compressedData, digestedData and
encryptedData, envelopedData types included. Scripts to check against
RFC4134 examples draft and interop and consistency checks of many
content types and variants.
[Steve Henson]
2008-04-02 19:44:00 +08:00
*) Add options to enc utility to support use of zlib compression BIO.
[Steve Henson]
*) Extend mk1mf to support importing of options and assembly language
files from Configure script, currently only included in VC-WIN32.
The assembly language rules can now optionally generate the source
files from the associated perl scripts.
[Steve Henson]
1. Changes for s_client.c to make it return non-zero exit code in case of handshake failure 2. Changes to x509_certificate_type function (crypto/x509/x509type.c) to make it recognize GOST certificates as EVP_PKT_SIGN|EVP_PKT_EXCH (required for s3_srvr to accept GOST client certificates). 3. Changes to EVP - adding of function EVP_PKEY_CTX_get0_peerkey - Make function EVP_PKEY_derive_set_peerkey work for context with ENCRYPT operation, because we use peerkey field in the context to pass non-ephemeral secret key to GOST encrypt operation. - added EVP_PKEY_CTRL_SET_IV control command. It is really GOST-specific, but it is used in SSL code, so it has to go in some header file, available during libssl compilation 4. Fix to HMAC to avoid call of OPENSSL_cleanse on undefined data 5. Include des.h if KSSL_DEBUG is defined into some libssl files, to make debugging output which depends on constants defined there, work and other KSSL_DEBUG output fixes 6. Declaration of real GOST ciphersuites, two authentication methods SSL_aGOST94 and SSL_aGOST2001 and one key exchange method SSL_kGOST 7. Implementation of these methods. 8. Support for sending unsolicited serverhello extension if GOST ciphersuite is selected. It is require for interoperability with CryptoPro CSP 3.0 and 3.6 and controlled by SSL_OP_CRYPTOPRO_TLSEXT_BUG constant. This constant is added to SSL_OP_ALL, because it does nothing, if non-GOST ciphersuite is selected, and all implementation of GOST include compatibility with CryptoPro. 9. Support for CertificateVerify message without length field. It is another CryptoPro bug, but support is made unconditional, because it does no harm for draft-conforming implementation. 10. In tls1_mac extra copy of stream mac context is no more done. When I've written currently commited code I haven't read EVP_DigestSignFinal manual carefully enough and haven't noticed that it does an internal digest ctx copying. This implementation was tested against 1. CryptoPro CSP 3.6 client and server 2. Cryptopro CSP 3.0 server
2007-10-26 20:06:36 +08:00
*) Implement remaining functionality needed to support GOST ciphersuites.
Interop testing has been performed using CryptoPro implementations.
[Victor B. Wagner <vitus@cryptocom.ru>]
*) s390x assembler pack.
[Andy Polyakov]
2007-09-27 15:09:46 +08:00
*) ARMv4 assembler pack. ARMv4 refers to v4 and later ISA, not CPU
"family."
[Andy Polyakov]
*) Implement Opaque PRF Input TLS extension as specified in
draft-rescorla-tls-opaque-prf-input-00.txt. Since this is not an
official specification yet and no extension type assignment by
IANA exists, this extension (for now) will have to be explicitly
enabled when building OpenSSL by providing the extension number
to use. For example, specify an option
-DTLSEXT_TYPE_opaque_prf_input=0x9527
to the "config" or "Configure" script to enable the extension,
assuming extension number 0x9527 (which is a completely arbitrary
and unofficial assignment based on the MD5 hash of the Internet
Draft). Note that by doing so, you potentially lose
interoperability with other TLS implementations since these might
be using the same extension number for other purposes.
SSL_set_tlsext_opaque_prf_input(ssl, src, len) is used to set the
opaque PRF input value to use in the handshake. This will create
an interal copy of the length-'len' string at 'src', and will
return non-zero for success.
To get more control and flexibility, provide a callback function
by using
SSL_CTX_set_tlsext_opaque_prf_input_callback(ctx, cb)
SSL_CTX_set_tlsext_opaque_prf_input_callback_arg(ctx, arg)
where
int (*cb)(SSL *, void *peerinput, size_t len, void *arg);
void *arg;
Callback function 'cb' will be called in handshakes, and is
expected to use SSL_set_tlsext_opaque_prf_input() as appropriate.
Argument 'arg' is for application purposes (the value as given to
SSL_CTX_set_tlsext_opaque_prf_input_callback_arg() will directly
be provided to the callback function). The callback function
has to return non-zero to report success: usually 1 to use opaque
PRF input just if possible, or 2 to enforce use of the opaque PRF
input. In the latter case, the library will abort the handshake
if opaque PRF input is not successfully negotiated.
Arguments 'peerinput' and 'len' given to the callback function
will always be NULL and 0 in the case of a client. A server will
see the client's opaque PRF input through these variables if
available (NULL and 0 otherwise). Note that if the server
provides an opaque PRF input, the length must be the same as the
length of the client's opaque PRF input.
Note that the callback function will only be called when creating
a new session (session resumption can resume whatever was
previously negotiated), and will not be called in SSL 2.0
handshakes; thus, SSL_CTX_set_options(ctx, SSL_OP_NO_SSLv2) or
SSL_set_options(ssl, SSL_OP_NO_SSLv2) is especially recommended
for applications that need to enforce opaque PRF input.
[Bodo Moeller]
*) Update ssl code to support digests other than SHA1+MD5 for handshake
MAC.
[Victor B. Wagner <vitus@cryptocom.ru>]
*) Add RFC4507 support to OpenSSL. This includes the corrections in
RFC4507bis. The encrypted ticket format is an encrypted encoded
SSL_SESSION structure, that way new session features are automatically
supported.
2007-08-24 06:59:09 +08:00
If a client application caches session in an SSL_SESSION structure
support is transparent because tickets are now stored in the encoded
SSL_SESSION.
The SSL_CTX structure automatically generates keys for ticket
protection in servers so again support should be possible
with no application modification.
If a client or server wishes to disable RFC4507 support then the option
SSL_OP_NO_TICKET can be set.
Add a TLS extension debugging callback to allow the contents of any client
or server extensions to be examined.
2007-08-28 07:41:36 +08:00
This work was sponsored by Google.
[Steve Henson]
2007-06-07 21:14:42 +08:00
*) Final changes to avoid use of pointer pointer casts in OpenSSL.
OpenSSL should now compile cleanly on gcc 4.2
[Peter Hartley <pdh@utter.chaos.org.uk>, Steve Henson]
*) Update SSL library to use new EVP_PKEY MAC API. Include generic MAC
support including streaming MAC support: this is required for GOST
ciphersuite support.
[Victor B. Wagner <vitus@cryptocom.ru>, Steve Henson]
*) Add option -stream to use PKCS#7 streaming in smime utility. New
function i2d_PKCS7_bio_stream() and PEM_write_PKCS7_bio_stream()
to output in BER and PEM format.
[Steve Henson]
2007-04-11 20:33:28 +08:00
*) Experimental support for use of HMAC via EVP_PKEY interface. This
allows HMAC to be handled via the EVP_DigestSign*() interface. The
EVP_PKEY "key" in this case is the HMAC key, potentially allowing
ENGINE support for HMAC keys which are unextractable. New -mac and
-macopt options to dgst utility.
2007-04-11 20:33:28 +08:00
[Steve Henson]
2007-04-08 20:47:18 +08:00
*) New option -sigopt to dgst utility. Update dgst to use
EVP_Digest{Sign,Verify}*. These two changes make it possible to use
alternative signing parameters such as X9.31 or PSS in the dgst
2007-04-08 20:47:18 +08:00
utility.
[Steve Henson]
*) Change ssl_cipher_apply_rule(), the internal function that does
the work each time a ciphersuite string requests enabling
("foo+bar"), moving ("+foo+bar"), disabling ("-foo+bar", or
removing ("!foo+bar") a class of ciphersuites: Now it maintains
the order of disabled ciphersuites such that those ciphersuites
that most recently went from enabled to disabled not only stay
in order with respect to each other, but also have higher priority
than other disabled ciphersuites the next time ciphersuites are
enabled again.
This means that you can now say, e.g., "PSK:-PSK:HIGH" to enable
the same ciphersuites as with "HIGH" alone, but in a specific
order where the PSK ciphersuites come first (since they are the
most recently disabled ciphersuites when "HIGH" is parsed).
Also, change ssl_create_cipher_list() (using this new
funcionality) such that between otherwise identical
cihpersuites, ephemeral ECDH is preferred over ephemeral DH in
the default order.
[Bodo Moeller]
*) Change ssl_create_cipher_list() so that it automatically
arranges the ciphersuites in reasonable order before starting
to process the rule string. Thus, the definition for "DEFAULT"
(SSL_DEFAULT_CIPHER_LIST) now is just "ALL:!aNULL:!eNULL", but
remains equivalent to "AES:ALL:!aNULL:!eNULL:+aECDH:+kRSA:+RC4:@STRENGTH".
This makes it much easier to arrive at a reasonable default order
in applications for which anonymous ciphers are OK (meaning
that you can't actually use DEFAULT).
[Bodo Moeller; suggested by Victor Duchovni]
*) Split the SSL/TLS algorithm mask (as used for ciphersuite string
processing) into multiple integers instead of setting
"SSL_MKEY_MASK" bits, "SSL_AUTH_MASK" bits, "SSL_ENC_MASK",
"SSL_MAC_MASK", and "SSL_SSL_MASK" bits all in a single integer.
(These masks as well as the individual bit definitions are hidden
away into the non-exported interface ssl/ssl_locl.h, so this
change to the definition of the SSL_CIPHER structure shouldn't
affect applications.) This give us more bits for each of these
categories, so there is no longer a need to coagulate AES128 and
AES256 into a single algorithm bit, and to coagulate Camellia128
and Camellia256 into a single algorithm bit, which has led to all
kinds of kludges.
Thus, among other things, the kludge introduced in 0.9.7m and
0.9.8e for masking out AES256 independently of AES128 or masking
out Camellia256 independently of AES256 is not needed here in 0.9.9.
With the change, we also introduce new ciphersuite aliases that
so far were missing: "AES128", "AES256", "CAMELLIA128", and
"CAMELLIA256".
[Bodo Moeller]
2007-02-03 22:41:12 +08:00
*) Add support for dsa-with-SHA224 and dsa-with-SHA256.
Use the leftmost N bytes of the signature input if the input is
larger than the prime q (with N being the size in bytes of q).
[Nils Larsch]
*) Very *very* experimental PKCS#7 streaming encoder support. Nothing uses
it yet and it is largely untested.
[Steve Henson]
2006-12-20 16:58:54 +08:00
*) Add support for the ecdsa-with-SHA224/256/384/512 signature types.
[Nils Larsch]
*) Initial incomplete changes to avoid need for function casts in OpenSSL
some compilers (gcc 4.2 and later) reject their use. Safestack is
reimplemented. Update ASN1 to avoid use of legacy functions.
[Steve Henson]
*) Win32/64 targets are linked with Winsock2.
[Andy Polyakov]
*) Add an X509_CRL_METHOD structure to allow CRL processing to be redirected
to external functions. This can be used to increase CRL handling
efficiency especially when CRLs are very large by (for example) storing
the CRL revoked certificates in a database.
[Steve Henson]
*) Overhaul of by_dir code. Add support for dynamic loading of CRLs so
new CRLs added to a directory can be used. New command line option
-verify_return_error to s_client and s_server. This causes real errors
to be returned by the verify callback instead of carrying on no matter
what. This reflects the way a "real world" verify callback would behave.
[Steve Henson]
*) GOST engine, supporting several GOST algorithms and public key formats.
Kindly donated by Cryptocom.
[Cryptocom]
*) Partial support for Issuing Distribution Point CRL extension. CRLs
partitioned by DP are handled but no indirect CRL or reason partitioning
(yet). Complete overhaul of CRL handling: now the most suitable CRL is
selected via a scoring technique which handles IDP and AKID in CRLs.
[Steve Henson]
*) New X509_STORE_CTX callbacks lookup_crls() and lookup_certs() which
will ultimately be used for all verify operations: this will remove the
X509_STORE dependency on certificate verification and allow alternative
lookup methods. X509_STORE based implementations of these two callbacks.
[Steve Henson]
*) Allow multiple CRLs to exist in an X509_STORE with matching issuer names.
Modify get_crl() to find a valid (unexpired) CRL if possible.
[Steve Henson]
2006-07-24 20:39:22 +08:00
*) New function X509_CRL_match() to check if two CRLs are identical. Normally
this would be called X509_CRL_cmp() but that name is already used by
a function that just compares CRL issuer names. Cache several CRL
extensions in X509_CRL structure and cache CRLDP in X509.
[Steve Henson]
*) Store a "canonical" representation of X509_NAME structure (ASN1 Name)
this maps equivalent X509_NAME structures into a consistent structure.
Name comparison can then be performed rapidly using memcmp().
[Steve Henson]
2006-07-17 21:26:54 +08:00
*) Non-blocking OCSP request processing. Add -timeout option to ocsp
utility.
2006-07-17 20:18:28 +08:00
[Steve Henson]
*) Allow digests to supply their own micalg string for S/MIME type using
the ctrl EVP_MD_CTRL_MICALG.
[Steve Henson]
*) During PKCS7 signing pass the PKCS7 SignerInfo structure to the
EVP_PKEY_METHOD before and after signing via the EVP_PKEY_CTRL_PKCS7_SIGN
ctrl. It can then customise the structure before and/or after signing
if necessary.
[Steve Henson]
*) New function OBJ_add_sigid() to allow application defined signature OIDs
to be added to OpenSSLs internal tables. New function OBJ_sigid_free()
to free up any added signature OIDs.
[Steve Henson]
*) New functions EVP_CIPHER_do_all(), EVP_CIPHER_do_all_sorted(),
EVP_MD_do_all() and EVP_MD_do_all_sorted() to enumerate internal
digest and cipher tables. New options added to openssl utility:
list-message-digest-algorithms and list-cipher-algorithms.
[Steve Henson]
*) Change the array representation of binary polynomials: the list
of degrees of non-zero coefficients is now terminated with -1.
Previously it was terminated with 0, which was also part of the
value; thus, the array representation was not applicable to
polynomials where t^0 has coefficient zero. This change makes
the array representation useful in a more general context.
[Douglas Stebila]
*) Various modifications and fixes to SSL/TLS cipher string
handling. For ECC, the code now distinguishes between fixed ECDH
with RSA certificates on the one hand and with ECDSA certificates
on the other hand, since these are separate ciphersuites. The
unused code for Fortezza ciphersuites has been removed.
For consistency with EDH, ephemeral ECDH is now called "EECDH"
(not "ECDHE"). For consistency with the code for DH
certificates, use of ECDH certificates is now considered ECDH
authentication, not RSA or ECDSA authentication (the latter is
merely the CA's signing algorithm and not actively used in the
protocol).
The temporary ciphersuite alias "ECCdraft" is no longer
available, and ECC ciphersuites are no longer excluded from "ALL"
and "DEFAULT". The following aliases now exist for RFC 4492
ciphersuites, most of these by analogy with the DH case:
kECDHr - ECDH cert, signed with RSA
kECDHe - ECDH cert, signed with ECDSA
kECDH - ECDH cert (signed with either RSA or ECDSA)
kEECDH - ephemeral ECDH
ECDH - ECDH cert or ephemeral ECDH
aECDH - ECDH cert
aECDSA - ECDSA cert
ECDSA - ECDSA cert
AECDH - anonymous ECDH
EECDH - non-anonymous ephemeral ECDH (equivalent to "kEECDH:-AECDH")
[Bodo Moeller]
*) Add additional S/MIME capabilities for AES and GOST ciphers if supported.
Use correct micalg parameters depending on digest(s) in signed message.
[Steve Henson]
*) Add engine support for EVP_PKEY_ASN1_METHOD. Add functions to process
an ENGINE asn1 method. Support ENGINE lookups in the ASN1 code.
[Steve Henson]
*) Initial engine support for EVP_PKEY_METHOD. New functions to permit
an engine to register a method. Add ENGINE lookups for methods and
functional reference processing.
[Steve Henson]
*) New functions EVP_Digest{Sign,Verify)*. These are enchance versions of
EVP_{Sign,Verify}* which allow an application to customise the signature
process.
[Steve Henson]
*) New -resign option to smime utility. This adds one or more signers
to an existing PKCS#7 signedData structure. Also -md option to use an
alternative message digest algorithm for signing.
[Steve Henson]
*) Tidy up PKCS#7 routines and add new functions to make it easier to
create PKCS7 structures containing multiple signers. Update smime
application to support multiple signers.
[Steve Henson]
*) New -macalg option to pkcs12 utility to allow setting of an alternative
digest MAC.
[Steve Henson]
*) Initial support for PKCS#5 v2.0 PRFs other than default SHA1 HMAC.
Reorganize PBE internals to lookup from a static table using NIDs,
2006-05-16 02:35:13 +08:00
add support for HMAC PBE OID translation. Add a EVP_CIPHER ctrl:
EVP_CTRL_PBE_PRF_NID this allows a cipher to specify an alternative
PRF which will be automatically used with PBES2.
[Steve Henson]
2006-05-15 00:50:22 +08:00
*) Replace the algorithm specific calls to generate keys in "req" with the
new API.
[Steve Henson]
*) Update PKCS#7 enveloped data routines to use new API. This is now
supported by any public key method supporting the encrypt operation. A
ctrl is added to allow the public key algorithm to examine or modify
the PKCS#7 RecipientInfo structure if it needs to: for RSA this is
a no op.
[Steve Henson]
2005-05-18 12:04:12 +08:00
*) Add a ctrl to asn1 method to allow a public key algorithm to express
a default digest type to use. In most cases this will be SHA1 but some
algorithms (such as GOST) need to specify an alternative digest. The
return value indicates how strong the preference is 1 means optional and
2 is mandatory (that is it is the only supported type). Modify
ASN1_item_sign() to accept a NULL digest argument to indicate it should
use the default md. Update openssl utilities to use the default digest
type for signing if it is not explicitly indicated.
[Steve Henson]
*) Use OID cross reference table in ASN1_sign() and ASN1_verify(). New
EVP_MD flag EVP_MD_FLAG_PKEY_METHOD_SIGNATURE. This uses the relevant
signing method from the key type. This effectively removes the link
between digests and public key types.
[Steve Henson]
*) Add an OID cross reference table and utility functions. Its purpose is to
translate between signature OIDs such as SHA1WithrsaEncryption and SHA1,
rsaEncryption. This will allow some of the algorithm specific hackery
needed to use the correct OID to be removed.
[Steve Henson]
*) Remove algorithm specific dependencies when setting PKCS7_SIGNER_INFO
structures for PKCS7_sign(). They are now set up by the relevant public
key ASN1 method.
[Steve Henson]
*) Add provisional EC pkey method with support for ECDSA and ECDH.
[Steve Henson]
2006-04-14 04:16:56 +08:00
*) Add support for key derivation (agreement) in the API, DH method and
pkeyutl.
[Steve Henson]
*) Add DSA pkey method and DH pkey methods, extend DH ASN1 method to support
public and private key formats. As a side effect these add additional
command line functionality not previously available: DSA signatures can be
generated and verified using pkeyutl and DH key support and generation in
pkey, genpkey.
[Steve Henson]
*) BeOS support.
[Oliver Tappe <zooey@hirschkaefer.de>]
*) New make target "install_html_docs" installs HTML renditions of the
manual pages.
[Oliver Tappe <zooey@hirschkaefer.de>]
*) New utility "genpkey" this is analogous to "genrsa" etc except it can
2006-04-11 21:28:52 +08:00
generate keys for any algorithm. Extend and update EVP_PKEY_METHOD to
support key and parameter generation and add initial key generation
functionality for RSA.
[Steve Henson]
*) Add functions for main EVP_PKEY_method operations. The undocumented
functions EVP_PKEY_{encrypt,decrypt} have been renamed to
EVP_PKEY_{encrypt,decrypt}_old.
[Steve Henson]
*) Initial definitions for EVP_PKEY_METHOD. This will be a high level public
key API, doesn't do much yet.
[Steve Henson]
*) New function EVP_PKEY_asn1_get0_info() to retrieve information about
public key algorithms. New option to openssl utility:
"list-public-key-algorithms" to print out info.
[Steve Henson]
*) Implement the Supported Elliptic Curves Extension for
ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
[Douglas Stebila]
*) Don't free up OIDs in OBJ_cleanup() if they are in use by EVP_MD or
EVP_CIPHER structures to avoid later problems in EVP_cleanup().
[Steve Henson]
*) New utilities pkey and pkeyparam. These are similar to algorithm specific
2006-04-11 21:28:52 +08:00
utilities such as rsa, dsa, dsaparam etc except they process any key
type.
2006-03-28 20:34:45 +08:00
[Steve Henson]
*) Transfer public key printing routines to EVP_PKEY_ASN1_METHOD. New
functions EVP_PKEY_print_public(), EVP_PKEY_print_private(),
EVP_PKEY_print_param() to print public key data from an EVP_PKEY
structure.
[Steve Henson]
*) Initial support for pluggable public key ASN1.
De-spaghettify the public key ASN1 handling. Move public and private
key ASN1 handling to a new EVP_PKEY_ASN1_METHOD structure. Relocate
algorithm specific handling to a single module within the relevant
algorithm directory. Add functions to allow (near) opaque processing
of public and private key structures.
[Steve Henson]
*) Implement the Supported Point Formats Extension for
ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
[Douglas Stebila]
*) Add initial support for RFC 4279 PSK TLS ciphersuites. Add members
for the psk identity [hint] and the psk callback functions to the
SSL_SESSION, SSL and SSL_CTX structure.
New ciphersuites:
PSK-RC4-SHA, PSK-3DES-EDE-CBC-SHA, PSK-AES128-CBC-SHA,
PSK-AES256-CBC-SHA
New functions:
SSL_CTX_use_psk_identity_hint
SSL_get_psk_identity_hint
SSL_get_psk_identity
SSL_use_psk_identity_hint
[Mika Kousa and Pasi Eronen of Nokia Corporation]
*) Add RFC 3161 compliant time stamp request creation, response generation
and response verification functionality.
[Zoltán Glózik <zglozik@opentsa.org>, The OpenTSA Project]
*) Add initial support for TLS extensions, specifically for the server_name
extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
have new members for a host name. The SSL data structure has an
additional member SSL_CTX *initial_ctx so that new sessions can be
stored in that context to allow for session resumption, even after the
SSL has been switched to a new SSL_CTX in reaction to a client's
server_name extension.
New functions (subject to change):
SSL_get_servername()
SSL_get_servername_type()
SSL_set_SSL_CTX()
New CTRL codes and macros (subject to change):
SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
- SSL_CTX_set_tlsext_servername_callback()
SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
- SSL_CTX_set_tlsext_servername_arg()
2006-12-22 05:13:27 +08:00
SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
2006-01-03 07:29:12 +08:00
openssl s_client has a new '-servername ...' option.
openssl s_server has new options '-servername_host ...', '-cert2 ...',
'-key2 ...', '-servername_fatal' (subject to change). This allows
testing the HostName extension for a specific single host name ('-cert'
and '-key' remain fallbacks for handshakes without HostName
negotiation). If the unrecognized_name alert has to be sent, this by
default is a warning; it becomes fatal with the '-servername_fatal'
option.
2006-01-03 07:29:12 +08:00
[Peter Sylvester, Remy Allais, Christophe Renou]
2006-01-03 07:29:12 +08:00
*) Whirlpool hash implementation is added.
[Andy Polyakov]
*) BIGNUM code on 64-bit SPARCv9 targets is switched from bn(64,64) to
bn(64,32). Because of instruction set limitations it doesn't have
any negative impact on performance. This was done mostly in order
to make it possible to share assembler modules, such as bn_mul_mont
implementations, between 32- and 64-bit builds without hassle.
[Andy Polyakov]
*) Move code previously exiled into file crypto/ec/ec2_smpt.c
to ec2_smpl.c, and no longer require the OPENSSL_EC_BIN_PT_COMP
macro.
[Bodo Moeller]
*) New candidate for BIGNUM assembler implementation, bn_mul_mont,
dedicated Montgomery multiplication procedure, is introduced.
BN_MONT_CTX is modified to allow bn_mul_mont to reach for higher
"64-bit" performance on certain 32-bit targets.
[Andy Polyakov]
*) New option SSL_OP_NO_COMP to disable use of compression selectively
in SSL structures. New SSL ctrl to set maximum send fragment size.
Save memory by seeting the I/O buffer sizes dynamically instead of
using the maximum available value.
[Steve Henson]
2005-10-01 12:08:48 +08:00
*) New option -V for 'openssl ciphers'. This prints the ciphersuite code
in addition to the text details.
[Bodo Moeller]
*) Very, very preliminary EXPERIMENTAL support for printing of general
ASN1 structures. This currently produces rather ugly output and doesn't
handle several customised structures at all.
[Steve Henson]
2005-09-01 00:37:54 +08:00
*) Integrated support for PVK file format and some related formats such
as MS PUBLICKEYBLOB and PRIVATEKEYBLOB. Command line switches to support
these in the 'rsa' and 'dsa' utilities.
[Steve Henson]
*) Support for PKCS#1 RSAPublicKey format on rsa utility command line.
[Steve Henson]
*) Remove the ancient ASN1_METHOD code. This was only ever used in one
place for the (very old) "NETSCAPE" format certificates which are now
handled using new ASN1 code equivalents.
[Steve Henson]
*) Let the TLSv1_method() etc. functions return a 'const' SSL_METHOD
pointer and make the SSL_METHOD parameter in SSL_CTX_new,
SSL_CTX_set_ssl_version and SSL_set_ssl_method 'const'.
[Nils Larsch]
*) Modify CRL distribution points extension code to print out previously
unsupported fields. Enhance extension setting code to allow setting of
all fields.
[Steve Henson]
2005-07-26 06:35:36 +08:00
*) Add print and set support for Issuing Distribution Point CRL extension.
[Steve Henson]
2005-05-18 12:04:12 +08:00
*) Change 'Configure' script to enable Camellia by default.
[NTT]
Changes between 0.9.8m and 0.9.8n [24 Mar 2010]
*) When rejecting SSL/TLS records due to an incorrect version number, never
update s->server with a new major version number. As of
- OpenSSL 0.9.8m if 'short' is a 16-bit type,
- OpenSSL 0.9.8f if 'short' is longer than 16 bits,
the previous behavior could result in a read attempt at NULL when
receiving specific incorrect SSL/TLS records once record payload
protection is active. (CVE-2010-0740)
[Bodo Moeller, Adam Langley <agl@chromium.org>]
*) Fix for CVE-2010-0433 where some kerberos enabled versions of OpenSSL
could be crashed if the relevant tables were not present (e.g. chrooted).
[Tomas Hoger <thoger@redhat.com>]
Changes between 0.9.8l and 0.9.8m [25 Feb 2010]
*) Always check bn_wexpend() return values for failure. (CVE-2009-3245)
[Martin Olsson, Neel Mehta]
2010-02-20 02:27:07 +08:00
*) Fix X509_STORE locking: Every 'objs' access requires a lock (to
accommodate for stack sorting, always a write lock!).
[Bodo Moeller]
2009-03-26 03:02:22 +08:00
*) On some versions of WIN32 Heap32Next is very slow. This can cause
excessive delays in the RAND_poll(): over a minute. As a workaround
include a time check in the inner Heap32Next loop too.
[Steve Henson]
2010-01-27 22:05:39 +08:00
*) The code that handled flushing of data in SSL/TLS originally used the
BIO_CTRL_INFO ctrl to see if any data was pending first. This caused
the problem outlined in PR#1949. The fix suggested there however can
trigger problems with buggy BIO_CTRL_WPENDING (e.g. some versions
of Apache). So instead simplify the code to flush unconditionally.
This should be fine since flushing with no data to flush is a no op.
[Steve Henson]
*) Handle TLS versions 2.0 and later properly and correctly use the
highest version of TLS/SSL supported. Although TLS >= 2.0 is some way
off ancient servers have a habit of sticking around for a while...
[Steve Henson]
*) Modify compression code so it frees up structures without using the
ex_data callbacks. This works around a problem where some applications
2010-01-26 20:30:00 +08:00
call CRYPTO_cleanup_all_ex_data() before application exit (e.g. when
restarting) then use compression (e.g. SSL with compression) later.
This results in significant per-connection memory leaks and
has caused some security issues including CVE-2008-1678 and
CVE-2009-4355.
[Steve Henson]
*) Constify crypto/cast (i.e., <openssl/cast.h>): a CAST_KEY doesn't
change when encrypting or decrypting.
[Bodo Moeller]
*) Add option SSL_OP_LEGACY_SERVER_CONNECT which will allow clients to
connect and renegotiate with servers which do not support RI.
Until RI is more widely deployed this option is enabled by default.
[Steve Henson]
*) Add "missing" ssl ctrls to clear options and mode.
[Steve Henson]
*) If client attempts to renegotiate and doesn't support RI respond with
2010-02-13 05:59:31 +08:00
a no_renegotiation alert as required by RFC5746. Some renegotiating
TLS clients will continue a connection gracefully when they receive
the alert. Unfortunately OpenSSL mishandled this alert and would hang
waiting for a server hello which it will never receive. Now we treat a
received no_renegotiation alert as a fatal error. This is because
applications requesting a renegotiation might well expect it to succeed
and would have no code in place to handle the server denying it so the
only safe thing to do is to terminate the connection.
[Steve Henson]
*) Add ctrl macro SSL_get_secure_renegotiation_support() which returns 1 if
peer supports secure renegotiation and 0 otherwise. Print out peer
renegotiation support in s_client/s_server.
[Steve Henson]
2009-12-02 23:28:27 +08:00
*) Replace the highly broken and deprecated SPKAC certification method with
the updated NID creation version. This should correctly handle UTF8.
[Steve Henson]
2010-02-13 05:59:31 +08:00
*) Implement RFC5746. Re-enable renegotiation but require the extension
as needed. Unfortunately, SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION
turns out to be a bad idea. It has been replaced by
SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION which can be set with
SSL_CTX_set_options(). This is really not recommended unless you
know what you are doing.
[Eric Rescorla <ekr@networkresonance.com>, Ben Laurie, Steve Henson]
2009-10-30 21:29:30 +08:00
*) Fixes to stateless session resumption handling. Use initial_ctx when
issuing and attempting to decrypt tickets in case it has changed during
servername handling. Use a non-zero length session ID when attempting
stateless session resumption: this makes it possible to determine if
a resumption has occurred immediately after receiving server hello
2009-10-30 21:29:30 +08:00
(several places in OpenSSL subtly assume this) instead of later in
the handshake.
[Steve Henson]
*) The functions ENGINE_ctrl(), OPENSSL_isservice(),
CMS_get1_RecipientRequest() and RAND_bytes() can return <=0 on error
fixes for a few places where the return code is not checked
correctly.
[Julia Lawall <julia@diku.dk>]
*) Add --strict-warnings option to Configure script to include devteam
warnings in other configurations.
[Steve Henson]
*) Add support for --libdir option and LIBDIR variable in makefiles. This
makes it possible to install openssl libraries in locations which
have names other than "lib", for example "/usr/lib64" which some
systems need.
[Steve Henson, based on patch from Jeremy Utley]
*) Don't allow the use of leading 0x80 in OIDs. This is a violation of
X690 8.9.12 and can produce some misleading textual output of OIDs.
[Steve Henson, reported by Dan Kaminsky]
*) Delete MD2 from algorithm tables. This follows the recommendation in
several standards that it is not used in new applications due to
several cryptographic weaknesses. For binary compatibility reasons
the MD2 API is still compiled in by default.
[Steve Henson]
2009-07-01 06:27:33 +08:00
*) Add compression id to {d2i,i2d}_SSL_SESSION so it is correctly saved
and restored.
[Steve Henson]
*) Rename uni2asc and asc2uni functions to OPENSSL_uni2asc and
OPENSSL_asc2uni conditionally on Netware platforms to avoid a name
clash.
[Guenter <lists@gknw.net>]
2009-06-29 00:24:37 +08:00
*) Fix the server certificate chain building code to use X509_verify_cert(),
it used to have an ad-hoc builder which was unable to cope with anything
other than a simple chain.
[David Woodhouse <dwmw2@infradead.org>, Steve Henson]
2009-06-26 19:29:26 +08:00
*) Don't check self signed certificate signatures in X509_verify_cert()
by default (a flag can override this): it just wastes time without
adding any security. As a useful side effect self signed root CAs
with non-FIPS digests are now usable in FIPS mode.
2009-06-15 23:01:00 +08:00
[Steve Henson]
2009-05-19 01:37:33 +08:00
*) In dtls1_process_out_of_seq_message() the check if the current message
is already buffered was missing. For every new message was memory
allocated, allowing an attacker to perform an denial of service attack
with sending out of seq handshake messages until there is no memory
left. Additionally every future messege was buffered, even if the
sequence number made no sense and would be part of another handshake.
So only messages with sequence numbers less than 10 in advance will be
buffered. (CVE-2009-1378)
2009-05-19 01:37:33 +08:00
[Robin Seggelmann, discovered by Daniel Mentz]
*) Records are buffered if they arrive with a future epoch to be
processed after finishing the corresponding handshake. There is
currently no limitation to this buffer allowing an attacker to perform
a DOS attack with sending records with future epochs until there is no
memory left. This patch adds the pqueue_size() function to determine
2009-05-19 01:37:33 +08:00
the size of a buffer and limits the record buffer to 100 entries.
(CVE-2009-1377)
2009-05-19 01:37:33 +08:00
[Robin Seggelmann, discovered by Daniel Mentz]
*) Keep a copy of frag->msg_header.frag_len so it can be used after the
parent structure is freed. (CVE-2009-1379)
2009-05-19 01:37:33 +08:00
[Daniel Mentz]
2009-04-08 00:33:26 +08:00
*) Handle non-blocking I/O properly in SSL_shutdown() call.
[Darryl Miles <darryl-mailinglists@netbauds.net>]
2009-03-26 03:02:22 +08:00
*) Add 2.5.4.* OIDs
[Ilya O. <vrghost@gmail.com>]
Changes between 0.9.8k and 0.9.8l [5 Nov 2009]
*) Disable renegotiation completely - this fixes a severe security
problem (CVE-2009-3555) at the cost of breaking all
renegotiation. Renegotiation can be re-enabled by setting
SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION in s3->flags at
run-time. This is really not recommended unless you know what
you're doing.
[Ben Laurie]
2009-03-25 20:57:50 +08:00
Changes between 0.9.8j and 0.9.8k [25 Mar 2009]
2009-01-28 20:36:14 +08:00
2009-03-25 20:54:14 +08:00
*) Don't set val to NULL when freeing up structures, it is freed up by
underlying code. If sizeof(void *) > sizeof(long) this can result in
zeroing past the valid field. (CVE-2009-0789)
[Paolo Ganci <Paolo.Ganci@AdNovum.CH>]
2009-03-25 20:53:50 +08:00
*) Fix bug where return value of CMS_SignerInfo_verify_content() was not
checked correctly. This would allow some invalid signed attributes to
appear to verify correctly. (CVE-2009-0591)
[Ivan Nestlerode <inestlerode@us.ibm.com>]
2009-03-25 20:53:26 +08:00
*) Reject UniversalString and BMPString types with invalid lengths. This
prevents a crash in ASN1_STRING_print_ex() which assumes the strings have
a legal length. (CVE-2009-0590)
[Steve Henson]
2009-03-15 21:37:34 +08:00
*) Set S/MIME signing as the default purpose rather than setting it
unconditionally. This allows applications to override it at the store
level.
[Steve Henson]
2009-03-15 02:33:49 +08:00
*) Permit restricted recursion of ASN1 strings. This is needed in practice
to handle some structures.
[Steve Henson]
2009-03-08 01:00:23 +08:00
*) Improve efficiency of mem_gets: don't search whole buffer each time
for a '\n'
[Jeremy Shapiro <jnshapir@us.ibm.com>]
*) New -hex option for openssl rand.
[Matthieu Herrb]
*) Print out UTF8String and NumericString when parsing ASN1.
[Steve Henson]
2009-01-28 20:36:14 +08:00
*) Support NumericString type for name components.
[Steve Henson]
2009-01-18 20:06:37 +08:00
*) Allow CC in the environment to override the automatically chosen
compiler. Note that nothing is done to ensure flags work with the
chosen compiler.
[Ben Laurie]
2009-01-08 07:44:27 +08:00
Changes between 0.9.8i and 0.9.8j [07 Jan 2009]
*) Properly check EVP_VerifyFinal() and similar return values
(CVE-2008-5077).
[Ben Laurie, Bodo Moeller, Google Security Team]
2009-01-09 20:48:02 +08:00
*) Enable TLS extensions by default.
[Ben Laurie]
*) Allow the CHIL engine to be loaded, whether the application is
multithreaded or not. (This does not release the developer from the
obligation to set up the dynamic locking callbacks.)
[Sander Temme <sander@temme.net>]
*) Use correct exit code if there is an error in dgst command.
[Steve Henson; problem pointed out by Roland Dirlewanger]
*) Tweak Configure so that you need to say "experimental-jpake" to enable
JPAKE, and need to use -DOPENSSL_EXPERIMENTAL_JPAKE in applications.
[Bodo Moeller]
*) Add experimental JPAKE support, including demo authentication in
s_client and s_server.
2008-10-27 02:40:52 +08:00
[Ben Laurie]
*) Set the comparison function in v3_addr_canonize().
[Rob Austein <sra@hactrn.net>]
2008-10-15 03:11:26 +08:00
*) Add support for XMPP STARTTLS in s_client.
[Philip Paeps <philip@freebsd.org>]
*) Change the server-side SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG behavior
to ensure that even with this option, only ciphersuites in the
server's preference list will be accepted. (Note that the option
applies only when resuming a session, so the earlier behavior was
just about the algorithm choice for symmetric cryptography.)
[Bodo Moeller]
Changes between 0.9.8h and 0.9.8i [15 Sep 2008]
2008-06-05 23:34:24 +08:00
*) Fix NULL pointer dereference if a DTLS server received
ChangeCipherSpec as first record (CVE-2009-1386).
[PR #1679]
*) Fix a state transition in s3_srvr.c and d1_srvr.c
(was using SSL3_ST_CW_CLNT_HELLO_B, should be ..._ST_SW_SRVR_...).
[Nagendra Modadugu]
*) The fix in 0.9.8c that supposedly got rid of unsafe
double-checked locking was incomplete for RSA blinding,
addressing just one layer of what turns out to have been
doubly unsafe triple-checked locking.
So now fix this for real by retiring the MONT_HELPER macro
in crypto/rsa/rsa_eay.c.
[Bodo Moeller; problem pointed out by Marius Schilder]
*) Various precautionary measures:
- Avoid size_t integer overflow in HASH_UPDATE (md32_common.h).
- Avoid a buffer overflow in d2i_SSL_SESSION() (ssl_asn1.c).
(NB: This would require knowledge of the secret session ticket key
to exploit, in which case you'd be SOL either way.)
- Change bn_nist.c so that it will properly handle input BIGNUMs
outside the expected range.
- Enforce the 'num' check in BN_div() (bn_div.c) for non-BN_DEBUG
builds.
[Neel Mehta, Bodo Moeller]
*) Allow engines to be "soft loaded" - i.e. optionally don't die if
the load fails. Useful for distros.
[Ben Laurie and the FreeBSD team]
2008-06-27 07:27:31 +08:00
*) Add support for Local Machine Keyset attribute in PKCS#12 files.
[Steve Henson]
*) Fix BN_GF2m_mod_arr() top-bit cleanup code.
[Huang Ying]
2008-06-05 23:34:24 +08:00
*) Expand ENGINE to support engine supplied SSL client certificate functions.
2008-06-10 00:48:42 +08:00
This work was sponsored by Logica.
2008-06-05 23:34:24 +08:00
[Steve Henson]
*) Add CryptoAPI ENGINE to support use of RSA and DSA keys held in Windows
keystores. Support for SSL/TLS client authentication too.
2008-06-05 23:34:24 +08:00
Not compiled unless enable-capieng specified to Configure.
2008-06-10 00:48:42 +08:00
This work was sponsored by Logica.
2008-06-05 23:34:24 +08:00
[Steve Henson]
*) Fix bug in X509_ATTRIBUTE creation: don't set attribute using
ASN1_TYPE_set1 if MBSTRING flag set. This bug would crash certain
attribute creation routines such as certificate requests and PKCS#12
files.
[Steve Henson]
2008-05-29 06:30:28 +08:00
Changes between 0.9.8g and 0.9.8h [28 May 2008]
*) Fix flaw if 'Server Key exchange message' is omitted from a TLS
handshake which could lead to a cilent crash as found using the
Codenomicon TLS test suite (CVE-2008-1672)
[Steve Henson, Mark Cox]
*) Fix double free in TLS server name extensions which could lead to
a remote crash found by Codenomicon TLS test suite (CVE-2008-0891)
[Joe Orton]
*) Clear error queue in SSL_CTX_use_certificate_chain_file()
Clear the error queue to ensure that error entries left from
older function calls do not interfere with the correct operation.
[Lutz Jaenicke, Erik de Castro Lopo]
*) Remove root CA certificates of commercial CAs:
The OpenSSL project does not recommend any specific CA and does not
have any policy with respect to including or excluding any CA.
Therefore it does not make any sense to ship an arbitrary selection
of root CA certificates with the OpenSSL software.
[Lutz Jaenicke]
*) RSA OAEP patches to fix two separate invalid memory reads.
The first one involves inputs when 'lzero' is greater than
'SHA_DIGEST_LENGTH' (it would read about SHA_DIGEST_LENGTH bytes
before the beginning of from). The second one involves inputs where
the 'db' section contains nothing but zeroes (there is a one-byte
invalid read after the end of 'db').
2008-05-21 02:49:00 +08:00
[Ivan Nestlerode <inestlerode@us.ibm.com>]
*) Partial backport from 0.9.9-dev:
Introduce bn_mul_mont (dedicated Montgomery multiplication
procedure) as a candidate for BIGNUM assembler implementation.
While 0.9.9-dev uses assembler for various architectures, only
x86_64 is available by default here in the 0.9.8 branch, and
32-bit x86 is available through a compile-time setting.
To try the 32-bit x86 assembler implementation, use Configure
option "enable-montasm" (which exists only for this backport).
As "enable-montasm" for 32-bit x86 disclaims code stability
anyway, in this constellation we activate additional code
backported from 0.9.9-dev for further performance improvements,
namely BN_from_montgomery_word. (To enable this otherwise,
e.g. x86_64, try "-DMONT_FROM_WORD___NON_DEFAULT_0_9_8_BUILD".)
[Andy Polyakov (backport partially by Bodo Moeller)]
2008-05-01 00:14:02 +08:00
*) Add TLS session ticket callback. This allows an application to set
TLS ticket cipher and HMAC keys rather than relying on hardcoded fixed
values. This is useful for key rollover for example where several key
sets may exist with different names.
[Steve Henson]
*) Reverse ENGINE-internal logic for caching default ENGINE handles.
This was broken until now in 0.9.8 releases, such that the only way
a registered ENGINE could be used (assuming it initialises
successfully on the host) was to explicitly set it as the default
for the relevant algorithms. This is in contradiction with 0.9.7
behaviour and the documentation. With this fix, when an ENGINE is
registered into a given algorithm's table of implementations, the
'uptodate' flag is reset so that auto-discovery will be used next
time a new context for that algorithm attempts to select an
implementation.
[Ian Lister (tweaked by Geoff Thorpe)]
*) Backport of CMS code to OpenSSL 0.9.8. This differs from the 0.9.9
implementation in the following ways:
Lack of EVP_PKEY_ASN1_METHOD means algorithm parameters have to be
hard coded.
Lack of BER streaming support means one pass streaming processing is
only supported if data is detached: setting the streaming flag is
ignored for embedded content.
CMS support is disabled by default and must be explicitly enabled
with the enable-cms configuration option.
[Steve Henson]
*) Update the GMP engine glue to do direct copies between BIGNUM and
mpz_t when openssl and GMP use the same limb size. Otherwise the
existing "conversion via a text string export" trick is still used.
[Paul Sheer <paulsheer@gmail.com>]
2008-04-02 19:44:00 +08:00
*) Zlib compression BIO. This is a filter BIO which compressed and
uncompresses any data passed through it.
[Steve Henson]
2008-04-02 19:24:22 +08:00
*) Add AES_wrap_key() and AES_unwrap_key() functions to implement
RFC3394 compatible AES key wrapping.
[Steve Henson]
*) Add utility functions to handle ASN1 structures. ASN1_STRING_set0():
sets string data without copying. X509_ALGOR_set0() and
X509_ALGOR_get0(): set and retrieve X509_ALGOR (AlgorithmIdentifier)
data. Attribute function X509at_get0_data_by_OBJ(): retrieves data
from an X509_ATTRIBUTE structure optionally checking it occurs only
once. ASN1_TYPE_set1(): set and ASN1_TYPE structure copying supplied
data.
[Steve Henson]
2008-02-27 14:01:28 +08:00
*) Fix BN flag handling in RSA_eay_mod_exp() and BN_MONT_CTX_set()
to get the expected BN_FLG_CONSTTIME behavior.
[Bodo Moeller (Google)]
*) Netware support:
- fixed wrong usage of ioctlsocket() when build for LIBC BSD sockets
- fixed do_tests.pl to run the test suite with CLIB builds too (CLIB_OPT)
- added some more tests to do_tests.pl
- fixed RunningProcess usage so that it works with newer LIBC NDKs too
- removed usage of BN_LLONG for CLIB builds to avoid runtime dependency
- added new Configure targets netware-clib-bsdsock, netware-clib-gcc,
netware-clib-bsdsock-gcc, netware-libc-bsdsock-gcc
- various changes to netware.pl to enable gcc-cross builds on Win32
platform
- changed crypto/bio/b_sock.c to work with macro functions (CLIB BSD)
- various changes to fix missing prototype warnings
- fixed x86nasm.pl to create correct asm files for NASM COFF output
- added AES, WHIRLPOOL and CPUID assembler code to build files
- added missing AES assembler make rules to mk1mf.pl
- fixed order of includes in apps/ocsp.c so that e_os.h settings apply
[Guenter Knauf <eflash@gmx.net>]
*) Implement certificate status request TLS extension defined in RFC3546.
A client can set the appropriate parameters and receive the encoded
OCSP response via a callback. A server can query the supplied parameters
and set the encoded OCSP response in the callback. Add simplified examples
to s_client and s_server.
[Steve Henson]
Changes between 0.9.8f and 0.9.8g [19 Oct 2007]
*) Fix various bugs:
+ Binary incompatibility of ssl_ctx_st structure
+ DTLS interoperation with non-compliant servers
+ Don't call get_session_cb() without proposed session
+ Fix ia64 assembler code
[Andy Polyakov, Steve Henson]
Changes between 0.9.8e and 0.9.8f [11 Oct 2007]
2007-03-21 22:33:16 +08:00
*) DTLS Handshake overhaul. There were longstanding issues with
OpenSSL DTLS implementation, which were making it impossible for
RFC 4347 compliant client to communicate with OpenSSL server.
Unfortunately just fixing these incompatibilities would "cut off"
pre-0.9.8f clients. To allow for hassle free upgrade post-0.9.8e
server keeps tolerating non RFC compliant syntax. The opposite is
not true, 0.9.8f client can not communicate with earlier server.
This update even addresses CVE-2007-4995.
[Andy Polyakov]
*) Changes to avoid need for function casts in OpenSSL: some compilers
(gcc 4.2 and later) reject their use.
[Kurt Roeckx <kurt@roeckx.be>, Peter Hartley <pdh@utter.chaos.org.uk>,
Steve Henson]
*) Add RFC4507 support to OpenSSL. This includes the corrections in
RFC4507bis. The encrypted ticket format is an encrypted encoded
SSL_SESSION structure, that way new session features are automatically
supported.
If a client application caches session in an SSL_SESSION structure
support is transparent because tickets are now stored in the encoded
SSL_SESSION.
The SSL_CTX structure automatically generates keys for ticket
protection in servers so again support should be possible
with no application modification.
If a client or server wishes to disable RFC4507 support then the option
SSL_OP_NO_TICKET can be set.
Add a TLS extension debugging callback to allow the contents of any client
or server extensions to be examined.
This work was sponsored by Google.
[Steve Henson]
*) Add initial support for TLS extensions, specifically for the server_name
extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
have new members for a host name. The SSL data structure has an
additional member SSL_CTX *initial_ctx so that new sessions can be
stored in that context to allow for session resumption, even after the
SSL has been switched to a new SSL_CTX in reaction to a client's
server_name extension.
New functions (subject to change):
SSL_get_servername()
SSL_get_servername_type()
SSL_set_SSL_CTX()
New CTRL codes and macros (subject to change):
SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
- SSL_CTX_set_tlsext_servername_callback()
SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
- SSL_CTX_set_tlsext_servername_arg()
SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
openssl s_client has a new '-servername ...' option.
openssl s_server has new options '-servername_host ...', '-cert2 ...',
'-key2 ...', '-servername_fatal' (subject to change). This allows
testing the HostName extension for a specific single host name ('-cert'
and '-key' remain fallbacks for handshakes without HostName
negotiation). If the unrecognized_name alert has to be sent, this by
default is a warning; it becomes fatal with the '-servername_fatal'
option.
[Peter Sylvester, Remy Allais, Christophe Renou, Steve Henson]
*) Add AES and SSE2 assembly language support to VC++ build.
[Steve Henson]
2007-06-21 01:46:43 +08:00
*) Mitigate attack on final subtraction in Montgomery reduction.
[Andy Polyakov]
*) Fix crypto/ec/ec_mult.c to work properly with scalars of value 0
(which previously caused an internal error).
[Bodo Moeller]
2007-05-13 23:14:38 +08:00
*) Squeeze another 10% out of IGE mode when in != out.
[Ben Laurie]
2007-05-13 20:57:59 +08:00
*) AES IGE mode speedup.
[Dean Gaudet (Google)]
*) Add the Korean symmetric 128-bit cipher SEED (see
http://www.kisa.or.kr/kisa/seed/jsp/seed_eng.jsp) and
add SEED ciphersuites from RFC 4162:
TLS_RSA_WITH_SEED_CBC_SHA = "SEED-SHA"
TLS_DHE_DSS_WITH_SEED_CBC_SHA = "DHE-DSS-SEED-SHA"
TLS_DHE_RSA_WITH_SEED_CBC_SHA = "DHE-RSA-SEED-SHA"
TLS_DH_anon_WITH_SEED_CBC_SHA = "ADH-SEED-SHA"
To minimize changes between patchlevels in the OpenSSL 0.9.8
series, SEED remains excluded from compilation unless OpenSSL
is configured with 'enable-seed'.
[KISA, Bodo Moeller]
*) Mitigate branch prediction attacks, which can be practical if a
single processor is shared, allowing a spy process to extract
information. For detailed background information, see
http://eprint.iacr.org/2007/039 (O. Aciicmez, S. Gueron,
J.-P. Seifert, "New Branch Prediction Vulnerabilities in OpenSSL
and Necessary Software Countermeasures"). The core of the change
are new versions BN_div_no_branch() and
BN_mod_inverse_no_branch() of BN_div() and BN_mod_inverse(),
respectively, which are slower, but avoid the security-relevant
conditional branches. These are automatically called by BN_div()
and BN_mod_inverse() if the flag BN_FLG_CONSTTIME is set for one
of the input BIGNUMs. Also, BN_is_bit_set() has been changed to
remove a conditional branch.
BN_FLG_CONSTTIME is the new name for the previous
BN_FLG_EXP_CONSTTIME flag, since it now affects more than just
modular exponentiation. (Since OpenSSL 0.9.7h, setting this flag
in the exponent causes BN_mod_exp_mont() to use the alternative
implementation in BN_mod_exp_mont_consttime().) The old name
remains as a deprecated alias.
Similarly, RSA_FLAG_NO_EXP_CONSTTIME is replaced by a more general
RSA_FLAG_NO_CONSTTIME flag since the RSA implementation now uses
constant-time implementations for more than just exponentiation.
Here too the old name is kept as a deprecated alias.
BN_BLINDING_new() will now use BN_dup() for the modulus so that
the BN_BLINDING structure gets an independent copy of the
modulus. This means that the previous "BIGNUM *m" argument to
BN_BLINDING_new() and to BN_BLINDING_create_param() now
essentially becomes "const BIGNUM *m", although we can't actually
change this in the header file before 0.9.9. It allows
RSA_setup_blinding() to use BN_with_flags() on the modulus to
enable BN_FLG_CONSTTIME.
[Matthew D Wood (Intel Corp)]
2007-03-21 22:33:16 +08:00
*) In the SSL/TLS server implementation, be strict about session ID
context matching (which matters if an application uses a single
external cache for different purposes). Previously,
out-of-context reuse was forbidden only if SSL_VERIFY_PEER was
set. This did ensure strict client verification, but meant that,
with applications using a single external cache for quite
different requirements, clients could circumvent ciphersuite
restrictions for a given session ID context by starting a session
in a different context.
[Bodo Moeller]
2006-09-28 21:35:01 +08:00
*) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
a ciphersuite string such as "DEFAULT:RSA" cannot enable
authentication-only ciphersuites.
[Bodo Moeller]
*) Update the SSL_get_shared_ciphers() fix CVE-2006-3738 which was
not complete and could lead to a possible single byte overflow
(CVE-2007-5135) [Ben Laurie]
2007-03-21 22:33:16 +08:00
Changes between 0.9.8d and 0.9.8e [23 Feb 2007]
*) Since AES128 and AES256 (and similarly Camellia128 and
Camellia256) share a single mask bit in the logic of
ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
kludge to work properly if AES128 is available and AES256 isn't
(or if Camellia128 is available and Camellia256 isn't).
[Victor Duchovni]
*) Fix the BIT STRING encoding generated by crypto/ec/ec_asn1.c
(within i2d_ECPrivateKey, i2d_ECPKParameters, i2d_ECParameters):
When a point or a seed is encoded in a BIT STRING, we need to
prevent the removal of trailing zero bits to get the proper DER
encoding. (By default, crypto/asn1/a_bitstr.c assumes the case
of a NamedBitList, for which trailing 0 bits need to be removed.)
[Bodo Moeller]
*) Have SSL/TLS server implementation tolerate "mismatched" record
protocol version while receiving ClientHello even if the
ClientHello is fragmented. (The server can't insist on the
particular protocol version it has chosen before the ServerHello
message has informed the client about his choice.)
[Bodo Moeller]
2006-11-27 22:18:05 +08:00
*) Add RFC 3779 support.
[Rob Austein for ARIN, Ben Laurie]
*) Load error codes if they are not already present instead of using a
static variable. This allows them to be cleanly unloaded and reloaded.
Improve header file function name parsing.
[Steve Henson]
*) extend SMTP and IMAP protocol emulation in s_client to use EHLO
or CAPABILITY handshake as required by RFCs.
[Goetz Babin-Ebell]
2006-09-28 21:35:01 +08:00
Changes between 0.9.8c and 0.9.8d [28 Sep 2006]
*) Introduce limits to prevent malicious keys being able to
cause a denial of service. (CVE-2006-2940)
[Steve Henson, Bodo Moeller]
*) Fix ASN.1 parsing of certain invalid structures that can result
in a denial of service. (CVE-2006-2937) [Steve Henson]
*) Fix buffer overflow in SSL_get_shared_ciphers() function.
(CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
*) Fix SSL client code which could crash if connecting to a
malicious SSLv2 server. (CVE-2006-4343)
[Tavis Ormandy and Will Drewry, Google Security Team]
*) Since 0.9.8b, ciphersuite strings naming explicit ciphersuites
match only those. Before that, "AES256-SHA" would be interpreted
2006-09-12 22:42:19 +08:00
as a pattern and match "AES128-SHA" too (since AES128-SHA got
the same strength classification in 0.9.7h) as we currently only
have a single AES bit in the ciphersuite description bitmap.
That change, however, also applied to ciphersuite strings such as
"RC4-MD5" that intentionally matched multiple ciphersuites --
namely, SSL 2.0 ciphersuites in addition to the more common ones
from SSL 3.0/TLS 1.0.
So we change the selection algorithm again: Naming an explicit
ciphersuite selects this one ciphersuite, and any other similar
ciphersuite (same bitmap) from *other* protocol versions.
Thus, "RC4-MD5" again will properly select both the SSL 2.0
ciphersuite and the SSL 3.0/TLS 1.0 ciphersuite.
Since SSL 2.0 does not have any ciphersuites for which the
128/256 bit distinction would be relevant, this works for now.
The proper fix will be to use different bits for AES128 and
AES256, which would have avoided the problems from the beginning;
however, bits are scarce, so we can only do this in a new release
(not just a patchlevel) when we can change the SSL_CIPHER
definition to split the single 'unsigned long mask' bitmap into
multiple values to extend the available space.
[Bodo Moeller]
Changes between 0.9.8b and 0.9.8c [05 Sep 2006]
*) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
(CVE-2006-4339) [Ben Laurie and Google Security Team]
2006-05-07 20:30:37 +08:00
2006-08-31 22:04:04 +08:00
*) Add AES IGE and biIGE modes.
[Ben Laurie]
*) Change the Unix randomness entropy gathering to use poll() when
possible instead of select(), since the latter has some
undesirable limitations.
[Darryl Miles via Richard Levitte and Bodo Moeller]
*) Disable "ECCdraft" ciphersuites more thoroughly. Now special
treatment in ssl/ssl_ciph.s makes sure that these ciphersuites
cannot be implicitly activated as part of, e.g., the "AES" alias.
However, please upgrade to OpenSSL 0.9.9[-dev] for
non-experimental use of the ECC ciphersuites to get TLS extension
support, which is required for curve and point format negotiation
to avoid potential handshake problems.
[Bodo Moeller]
2006-06-15 01:51:46 +08:00
*) Disable rogue ciphersuites:
- SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
- SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
- SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
The latter two were purportedly from
draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
appear there.
2006-12-22 05:13:27 +08:00
Also deactivate the remaining ciphersuites from
2006-06-15 01:51:46 +08:00
draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
unofficial, and the ID has long expired.
[Bodo Moeller]
*) Fix RSA blinding Heisenbug (problems sometimes occurred on
2006-06-14 16:55:23 +08:00
dual-core machines) and other potential thread-safety issues.
[Bodo Moeller]
*) Add the symmetric cipher Camellia (128-bit, 192-bit, 256-bit key
versions), which is now available for royalty-free use
(see http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html).
Also, add Camellia TLS ciphersuites from RFC 4132.
To minimize changes between patchlevels in the OpenSSL 0.9.8
series, Camellia remains excluded from compilation unless OpenSSL
is configured with 'enable-camellia'.
[NTT]
2006-05-07 20:30:37 +08:00
*) Disable the padding bug check when compression is in use. The padding
bug check assumes the first packet is of even length, this is not
necessarily true if compresssion is enabled and can result in false
2006-05-07 20:30:37 +08:00
positives causing handshake failure. The actual bug test is ancient
code so it is hoped that implementations will either have fixed it by
now or any which still have the bug do not support compression.
[Steve Henson]
Changes between 0.9.8a and 0.9.8b [04 May 2006]
2005-11-01 15:53:37 +08:00
*) When applying a cipher rule check to see if string match is an explicit
cipher suite and only match that one cipher suite if it is.
[Steve Henson]
2006-01-15 21:50:10 +08:00
*) Link in manifests for VC++ if needed.
[Austin Ziegler <halostatue@gmail.com>]
*) Update support for ECC-based TLS ciphersuites according to
2006-03-12 06:10:34 +08:00
draft-ietf-tls-ecc-12.txt with proposed changes (but without
TLS extensions, which are supported starting with the 0.9.9
branch, not in the OpenSSL 0.9.8 branch).
[Douglas Stebila]
*) New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free() to support
opaque EVP_CIPHER_CTX handling.
[Steve Henson]
2005-12-05 21:46:46 +08:00
*) Fixes and enhancements to zlib compression code. We now only use
"zlib1.dll" and use the default __cdecl calling convention on Win32
to conform with the standards mentioned here:
http://www.zlib.net/DLL_FAQ.txt
Static zlib linking now works on Windows and the new --with-zlib-include
--with-zlib-lib options to Configure can be used to supply the location
of the headers and library. Gracefully handle case where zlib library
can't be loaded.
[Steve Henson]
*) Several fixes and enhancements to the OID generation code. The old code
sometimes allowed invalid OIDs (1.X for X >= 40 for example), couldn't
handle numbers larger than ULONG_MAX, truncated printing and had a
non standard OBJ_obj2txt() behaviour.
[Steve Henson]
2005-11-07 01:58:26 +08:00
*) Add support for building of engines under engine/ as shared libraries
under VC++ build system.
[Steve Henson]
2005-11-01 15:53:37 +08:00
*) Corrected the numerous bugs in the Win32 path splitter in DSO.
Hopefully, we will not see any false combination of paths any more.
[Richard Levitte]
Changes between 0.9.8 and 0.9.8a [11 Oct 2005]
*) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
(part of SSL_OP_ALL). This option used to disable the
countermeasure against man-in-the-middle protocol-version
rollback in the SSL 2.0 server implementation, which is a bad
2005-10-19 19:00:39 +08:00
idea. (CVE-2005-2969)
[Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
for Information Security, National Institute of Advanced Industrial
Science and Technology [AIST], Japan)]
2005-07-06 03:16:24 +08:00
2005-09-03 06:49:54 +08:00
*) Add two function to clear and return the verify parameter flags.
[Steve Henson]
*) Keep cipherlists sorted in the source instead of sorting them at
runtime, thus removing the need for a lock.
[Nils Larsch]
*) Avoid some small subgroup attacks in Diffie-Hellman.
[Nick Mathewson and Ben Laurie]
*) Add functions for well-known primes.
[Nick Mathewson]
2005-08-08 06:21:49 +08:00
*) Extended Windows CE support.
[Satoshi Nakamura and Andy Polyakov]
*) Initialize SSL_METHOD structures at compile time instead of during
runtime, thus removing the need for a lock.
[Steve Henson]
*) Make PKCS7_decrypt() work even if no certificate is supplied by
attempting to decrypt each encrypted key in turn. Add support to
smime utility.
[Steve Henson]
2005-07-06 03:16:24 +08:00
Changes between 0.9.7h and 0.9.8 [05 Jul 2005]
2006-06-14 16:55:23 +08:00
[NB: OpenSSL 0.9.7i and later 0.9.7 patch levels were released after
OpenSSL 0.9.8.]
2005-07-06 02:36:42 +08:00
*) Add libcrypto.pc and libssl.pc for those who feel they need them.
[Richard Levitte]
*) Change CA.sh and CA.pl so they don't bundle the CSR and the private
key into the same file any more.
[Richard Levitte]
2005-07-05 19:48:38 +08:00
*) Add initial support for Win64, both IA64 and AMD64/x64 flavors.
[Andy Polyakov]
2005-07-05 07:12:04 +08:00
*) Add -utf8 command line and config file option to 'ca'.
[Stefan <stf@udoma.org]
2005-07-06 02:36:42 +08:00
*) Removed the macro des_crypt(), as it seems to conflict with some
libraries. Use DES_crypt().
[Richard Levitte]
*) Correct naming of the 'chil' and '4758cca' ENGINEs. This
involves renaming the source and generated shared-libs for
both. The engines will accept the corrected or legacy ids
('ncipher' and '4758_cca' respectively) when binding. NB,
this only applies when building 'shared'.
[Corinna Vinschen <vinschen@redhat.com> and Geoff Thorpe]
*) Add attribute functions to EVP_PKEY structure. Modify
PKCS12_create() to recognize a CSP name attribute and
use it. Make -CSP option work again in pkcs12 utility.
[Steve Henson]
*) Add new functionality to the bn blinding code:
- automatic re-creation of the BN_BLINDING parameters after
a fixed number of uses (currently 32)
- add new function for parameter creation
- introduce flags to control the update behaviour of the
BN_BLINDING parameters
- hide BN_BLINDING structure
Add a second BN_BLINDING slot to the RSA structure to improve
performance when a single RSA object is shared among several
threads.
[Nils Larsch]
2005-04-27 00:02:40 +08:00
*) Add support for DTLS.
[Nagendra Modadugu <nagendra@cs.stanford.edu> and Ben Laurie]
*) Add support for DER encoded private keys (SSL_FILETYPE_ASN1)
to SSL_CTX_use_PrivateKey_file() and SSL_use_PrivateKey_file()
[Walter Goulet]
*) Remove buggy and incomplete DH cert support from
ssl/ssl_rsa.c and ssl/s3_both.c
[Nils Larsch]
*) Use SHA-1 instead of MD5 as the default digest algorithm for
the apps/openssl applications.
[Nils Larsch]
*) Compile clean with "-Wall -Wmissing-prototypes
-Wstrict-prototypes -Wmissing-declarations -Werror". Currently
DEBUG_SAFESTACK must also be set.
[Ben Laurie]
*) Change ./Configure so that certain algorithms can be disabled by default.
The new counterpiece to "no-xxx" is "enable-xxx".
The patented RC5 and MDC2 algorithms will now be disabled unless
"enable-rc5" and "enable-mdc2", respectively, are specified.
(IDEA remains enabled despite being patented. This is because IDEA
is frequently required for interoperability, and there is no license
fee for non-commercial use. As before, "no-idea" can be used to
avoid this algorithm.)
[Bodo Moeller]
*) Add processing of proxy certificates (see RFC 3820). This work was
sponsored by KTH (The Royal Institute of Technology in Stockholm) and
EGEE (Enabling Grids for E-science in Europe).
[Richard Levitte]
2004-11-26 23:26:09 +08:00
*) RC4 performance overhaul on modern architectures/implementations, such
as Intel P4, IA-64 and AMD64.
[Andy Polyakov]
*) New utility extract-section.pl. This can be used specify an alternative
section number in a pod file instead of having to treat each file as
a separate case in Makefile. This can be done by adding two lines to the
pod file:
=for comment openssl_section:XXX
The blank line is mandatory.
[Steve Henson]
*) New arguments -certform, -keyform and -pass for s_client and s_server
to allow alternative format key and certificate files and passphrase
sources.
[Steve Henson]
*) New structure X509_VERIFY_PARAM which combines current verify parameters,
update associated structures and add various utility functions.
Add new policy related verify parameters, include policy checking in
standard verify code. Enhance 'smime' application with extra parameters
to support policy checking and print out.
[Steve Henson]
2004-08-05 06:42:29 +08:00
*) Add a new engine to support VIA PadLock ACE extensions in the VIA C3
Nehemiah processors. These extensions support AES encryption in hardware
as well as RNG (though RNG support is currently disabled).
[Michal Ludvig <michal@logix.cz>, with help from Andy Polyakov]
*) Deprecate BN_[get|set]_params() functions (they were ignored internally).
[Geoff Thorpe]
*) New FIPS 180-2 algorithms, SHA-224/-256/-384/-512 are implemented.
[Andy Polyakov and a number of other people]
*) Improved PowerPC platform support. Most notably BIGNUM assembler
implementation contributed by IBM.
[Suresh Chari, Peter Waltenberg, Andy Polyakov]
*) The new 'RSA_generate_key_ex' function now takes a BIGNUM for the public
exponent rather than 'unsigned long'. There is a corresponding change to
the new 'rsa_keygen' element of the RSA_METHOD structure.
[Jelte Jansen, Geoff Thorpe]
*) Functionality for creating the initial serial number file is now
moved from CA.pl to the 'ca' utility with a new option -create_serial.
(Before OpenSSL 0.9.7e, CA.pl used to initialize the serial
number file to 1, which is bound to cause problems. To avoid
the problems while respecting compatibility between different 0.9.7
patchlevels, 0.9.7e employed 'openssl x509 -next_serial' in
CA.pl for serial number initialization. With the new release 0.9.8,
we can fix the problem directly in the 'ca' utility.)
[Steve Henson]
*) Reduced header interdepencies by declaring more opaque objects in
ossl_typ.h. As a consequence, including some headers (eg. engine.h) will
give fewer recursive includes, which could break lazy source code - so
this change is covered by the OPENSSL_NO_DEPRECATED symbol. As always,
developers should define this symbol when building and using openssl to
ensure they track the recommended behaviour, interfaces, [etc], but
backwards-compatible behaviour prevails when this isn't defined.
[Geoff Thorpe]
2004-03-31 20:55:33 +08:00
*) New function X509_POLICY_NODE_print() which prints out policy nodes.
[Steve Henson]
*) Add new EVP function EVP_CIPHER_CTX_rand_key and associated functionality.
This will generate a random key of the appropriate length based on the
cipher context. The EVP_CIPHER can provide its own random key generation
routine to support keys of a specific form. This is used in the des and
3des routines to generate a key of the correct parity. Update S/MIME
code to use new functions and hence generate correct parity DES keys.
Add EVP_CHECK_DES_KEY #define to return an error if the key is not
valid (weak or incorrect parity).
[Steve Henson]
*) Add a local set of CRLs that can be used by X509_verify_cert() as well
as looking them up. This is useful when the verified structure may contain
CRLs, for example PKCS#7 signedData. Modify PKCS7_verify() to use any CRLs
present unless the new PKCS7_NO_CRL flag is asserted.
[Steve Henson]
2004-03-27 21:30:14 +08:00
*) Extend ASN1 oid configuration module. It now additionally accepts the
syntax:
shortName = some long name, 1.2.3.4
[Steve Henson]
*) Reimplemented the BN_CTX implementation. There is now no more static
limitation on the number of variables it can handle nor the depth of the
"stack" handling for BN_CTX_start()/BN_CTX_end() pairs. The stack
information can now expand as required, and rather than having a single
static array of bignums, BN_CTX now uses a linked-list of such arrays
allowing it to expand on demand whilst maintaining the usefulness of
BN_CTX's "bundling".
[Geoff Thorpe]
*) Add a missing BN_CTX parameter to the 'rsa_mod_exp' callback in RSA_METHOD
to allow all RSA operations to function using a single BN_CTX.
[Geoff Thorpe]
*) Preliminary support for certificate policy evaluation and checking. This
is initially intended to pass the tests outlined in "Conformance Testing
of Relying Party Client Certificate Path Processing Logic" v1.07.
[Steve Henson]
*) bn_dup_expand() has been deprecated, it was introduced in 0.9.7 and
remained unused and not that useful. A variety of other little bignum
tweaks and fixes have also been made continuing on from the audit (see
below).
[Geoff Thorpe]
*) Constify all or almost all d2i, c2i, s2i and r2i functions, along with
associated ASN1, EVP and SSL functions and old ASN1 macros.
[Richard Levitte]
*) BN_zero() only needs to set 'top' and 'neg' to zero for correct results,
and this should never fail. So the return value from the use of
BN_set_word() (which can fail due to needless expansion) is now deprecated;
if OPENSSL_NO_DEPRECATED is defined, BN_zero() is a void macro.
[Geoff Thorpe]
*) BN_CTX_get() should return zero-valued bignums, providing the same
initialised value as BN_new().
[Geoff Thorpe, suggested by Ulf Möller]
*) Support for inhibitAnyPolicy certificate extension.
[Steve Henson]
*) An audit of the BIGNUM code is underway, for which debugging code is
enabled when BN_DEBUG is defined. This makes stricter enforcements on what
is considered valid when processing BIGNUMs, and causes execution to
assert() when a problem is discovered. If BN_DEBUG_RAND is defined,
further steps are taken to deliberately pollute unused data in BIGNUM
structures to try and expose faulty code further on. For now, openssl will
(in its default mode of operation) continue to tolerate the inconsistent
forms that it has tolerated in the past, but authors and packagers should
consider trying openssl and their own applications when compiled with
these debugging symbols defined. It will help highlight potential bugs in
their own code, and will improve the test coverage for OpenSSL itself. At
some point, these tighter rules will become openssl's default to improve
maintainability, though the assert()s and other overheads will remain only
in debugging configurations. See bn.h for more details.
[Geoff Thorpe, Nils Larsch, Ulf Möller]
*) BN_CTX_init() has been deprecated, as BN_CTX is an opaque structure
that can only be obtained through BN_CTX_new() (which implicitly
initialises it). The presence of this function only made it possible
to overwrite an existing structure (and cause memory leaks).
[Geoff Thorpe]
*) Because of the callback-based approach for implementing LHASH as a
template type, lh_insert() adds opaque objects to hash-tables and
lh_doall() or lh_doall_arg() are typically used with a destructor callback
to clean up those corresponding objects before destroying the hash table
(and losing the object pointers). So some over-zealous constifications in
LHASH have been relaxed so that lh_insert() does not take (nor store) the
objects as "const" and the lh_doall[_arg] callback wrappers are not
prototyped to have "const" restrictions on the object pointers they are
given (and so aren't required to cast them away any more).
[Geoff Thorpe]
2003-10-29 12:40:13 +08:00
*) The tmdiff.h API was so ugly and minimal that our own timing utility
(speed) prefers to use its own implementation. The two implementations
haven't been consolidated as yet (volunteers?) but the tmdiff API has had
its object type properly exposed (MS_TM) instead of casting to/from "char
*". This may still change yet if someone realises MS_TM and "ms_time_***"
aren't necessarily the greatest nomenclatures - but this is what was used
internally to the implementation so I've used that for now.
[Geoff Thorpe]
*) Ensure that deprecated functions do not get compiled when
OPENSSL_NO_DEPRECATED is defined. Some "openssl" subcommands and a few of
the self-tests were still using deprecated key-generation functions so
these have been updated also.
[Geoff Thorpe]
*) Reorganise PKCS#7 code to separate the digest location functionality
into PKCS7_find_digest(), digest addition into PKCS7_bio_add_digest().
New function PKCS7_set_digest() to set the digest type for PKCS#7
digestedData type. Add additional code to correctly generate the
digestedData type and add support for this type in PKCS7 initialization
functions.
[Steve Henson]
*) New function PKCS7_set0_type_other() this initializes a PKCS7
structure of type "other".
[Steve Henson]
*) Fix prime generation loop in crypto/bn/bn_prime.pl by making
sure the loop does correctly stop and breaking ("division by zero")
modulus operations are not performed. The (pre-generated) prime
table crypto/bn/bn_prime.h was already correct, but it could not be
re-generated on some platforms because of the "division by zero"
situation in the script.
[Ralf S. Engelschall]
*) Update support for ECC-based TLS ciphersuites according to
draft-ietf-tls-ecc-03.txt: the KDF1 key derivation function with
SHA-1 now is only used for "small" curves (where the
representation of a field element takes up to 24 bytes); for
larger curves, the field element resulting from ECDH is directly
used as premaster secret.
[Douglas Stebila (Sun Microsystems Laboratories)]
*) Add code for kP+lQ timings to crypto/ec/ectest.c, and add SEC2
curve secp160r1 to the tests.
[Douglas Stebila (Sun Microsystems Laboratories)]
*) Add the possibility to load symbols globally with DSO.
[Götz Babin-Ebell <babin-ebell@trustcenter.de> via Richard Levitte]
*) Add the functions ERR_set_mark() and ERR_pop_to_mark() for better
control of the error stack.
[Richard Levitte]
2003-05-01 11:57:46 +08:00
*) Add support for STORE in ENGINE.
[Richard Levitte]
*) Add the STORE type. The intention is to provide a common interface
to certificate and key stores, be they simple file-based stores, or
HSM-type store, or LDAP stores, or...
NOTE: The code is currently UNTESTED and isn't really used anywhere.
[Richard Levitte]
2003-05-01 11:45:18 +08:00
*) Add a generic structure called OPENSSL_ITEM. This can be used to
pass a list of arguments to any function as well as provide a way
for a function to pass data back to the caller.
[Richard Levitte]
*) Add the functions BUF_strndup() and BUF_memdup(). BUF_strndup()
works like BUF_strdup() but can be used to duplicate a portion of
a string. The copy gets NUL-terminated. BUF_memdup() duplicates
a memory area.
[Richard Levitte]
*) Add the function sk_find_ex() which works like sk_find(), but will
return an index to an element even if an exact match couldn't be
found. The index is guaranteed to point at the element where the
searched-for key would be inserted to preserve sorting order.
[Richard Levitte]
*) Add the function OBJ_bsearch_ex() which works like OBJ_bsearch() but
takes an extra flags argument for optional functionality. Currently,
the following flags are defined:
OBJ_BSEARCH_VALUE_ON_NOMATCH
This one gets OBJ_bsearch_ex() to return a pointer to the first
element where the comparing function returns a negative or zero
number.
OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
This one gets OBJ_bsearch_ex() to return a pointer to the first
element where the comparing function returns zero. This is useful
if there are more than one element where the comparing function
returns zero.
[Richard Levitte]
*) Make it possible to create self-signed certificates with 'openssl ca'
in such a way that the self-signed certificate becomes part of the
CA database and uses the same mechanisms for serial number generation
as all other certificate signing. The new flag '-selfsign' enables
this functionality. Adapt CA.sh and CA.pl.in.
[Richard Levitte]
*) Add functionality to check the public key of a certificate request
against a given private. This is useful to check that a certificate
request can be signed by that key (self-signing).
[Richard Levitte]
*) Make it possible to have multiple active certificates with the same
subject in the CA index file. This is done only if the keyword
'unique_subject' is set to 'no' in the main CA section (default
if 'CA_default') of the configuration file. The value is saved
with the database itself in a separate index attribute file,
named like the index file with '.attr' appended to the name.
[Richard Levitte]
2003-03-30 09:51:16 +08:00
*) Generate muti valued AVAs using '+' notation in config files for
req and dirName.
[Steve Henson]
2003-03-25 01:04:44 +08:00
*) Support for nameConstraints certificate extension.
[Steve Henson]
2003-03-22 00:26:20 +08:00
*) Support for policyConstraints certificate extension.
[Steve Henson]
2003-03-21 01:26:44 +08:00
*) Support for policyMappings certificate extension.
[Steve Henson]
*) Make sure the default DSA_METHOD implementation only uses its
dsa_mod_exp() and/or bn_mod_exp() handlers if they are non-NULL,
and change its own handlers to be NULL so as to remove unnecessary
indirection. This lets alternative implementations fallback to the
default implementation more easily.
[Geoff Thorpe]
*) Support for directoryName in GeneralName related extensions
in config files.
[Steve Henson]
*) Make it possible to link applications using Makefile.shared.
Make that possible even when linking against static libraries!
[Richard Levitte]
*) Support for single pass processing for S/MIME signing. This now
means that S/MIME signing can be done from a pipe, in addition
cleartext signing (multipart/signed type) is effectively streaming
and the signed data does not need to be all held in memory.
This is done with a new flag PKCS7_STREAM. When this flag is set
PKCS7_sign() only initializes the PKCS7 structure and the actual signing
is done after the data is output (and digests calculated) in
SMIME_write_PKCS7().
[Steve Henson]
*) Add full support for -rpath/-R, both in shared libraries and
applications, at least on the platforms where it's known how
to do it.
[Richard Levitte]
*) In crypto/ec/ec_mult.c, implement fast point multiplication with
2003-02-07 03:32:06 +08:00
precomputation, based on wNAF splitting: EC_GROUP_precompute_mult()
will now compute a table of multiples of the generator that
2003-02-07 03:32:06 +08:00
makes subsequent invocations of EC_POINTs_mul() or EC_POINT_mul()
faster (notably in the case of a single point multiplication,
scalar * generator).
[Nils Larsch, Bodo Moeller]
*) IPv6 support for certificate extensions. The various extensions
which use the IP:a.b.c.d can now take IPv6 addresses using the
formats of RFC1884 2.2 . IPv6 addresses are now also displayed
correctly.
[Steve Henson]
2003-01-30 23:52:40 +08:00
*) Added an ENGINE that implements RSA by performing private key
exponentiations with the GMP library. The conversions to and from
GMP's mpz_t format aren't optimised nor are any montgomery forms
cached, and on x86 it appears OpenSSL's own performance has caught up.
However there are likely to be other architectures where GMP could
provide a boost. This ENGINE is not built in by default, but it can be
specified at Configure time and should be accompanied by the necessary
linker additions, eg;
./config -DOPENSSL_USE_GMP -lgmp
[Geoff Thorpe]
*) "openssl engine" will not display ENGINE/DSO load failure errors when
testing availability of engines with "-t" - the old behaviour is
produced by increasing the feature's verbosity with "-tt".
[Geoff Thorpe]
*) ECDSA routines: under certain error conditions uninitialized BN objects
could be freed. Solution: make sure initialization is performed early
enough. (Reported and fix supplied by Nils Larsch <nla@trustcenter.de>
via PR#459)
[Lutz Jaenicke]
*) Key-generation can now be implemented in RSA_METHOD, DSA_METHOD
and DH_METHOD (eg. by ENGINE implementations) to override the normal
software implementations. For DSA and DH, parameter generation can
also be overridden by providing the appropriate method callbacks.
[Geoff Thorpe]
This is a first-cut at improving the callback mechanisms used in key-generation and prime-checking functions. Rather than explicitly passing callback functions and caller-defined context data for the callbacks, a new structure BN_GENCB is defined that encapsulates this; a pointer to the structure is passed to all such functions instead. This wrapper structure allows the encapsulation of "old" and "new" style callbacks - "new" callbacks return a boolean result on the understanding that returning FALSE should terminate keygen/primality processing. The BN_GENCB abstraction will allow future callback modifications without needing to break binary compatibility nor change the API function prototypes. The new API functions have been given names ending in "_ex" and the old functions are implemented as wrappers to the new ones. The OPENSSL_NO_DEPRECATED symbol has been introduced so that, if defined, declaration of the older functions will be skipped. NB: Some openssl-internal code will stick with the older callbacks for now, so appropriate "#undef" logic will be put in place - this is in case the user is *building* openssl (rather than *including* its headers) with this symbol defined. There is another change in the new _ex functions; the key-generation functions do not return key structures but operate on structures passed by the caller, the return value is a boolean. This will allow for a smoother transition to having key-generation as "virtual function" in the various ***_METHOD tables.
2002-12-08 13:24:31 +08:00
*) Change the "progress" mechanism used in key-generation and
primality testing to functions that take a new BN_GENCB pointer in
place of callback/argument pairs. The new API functions have "_ex"
postfixes and the older functions are reimplemented as wrappers for
the new ones. The OPENSSL_NO_DEPRECATED symbol can be used to hide
declarations of the old functions to help (graceful) attempts to
migrate to the new functions. Also, the new key-generation API
functions operate on a caller-supplied key-structure and return
success/failure rather than returning a key or NULL - this is to
help make "keygen" another member function of RSA_METHOD etc.
Example for using the new callback interface:
int (*my_callback)(int a, int b, BN_GENCB *cb) = ...;
void *my_arg = ...;
BN_GENCB my_cb;
BN_GENCB_set(&my_cb, my_callback, my_arg);
return BN_is_prime_ex(some_bignum, BN_prime_checks, NULL, &cb);
/* For the meaning of a, b in calls to my_callback(), see the
* documentation of the function that calls the callback.
* cb will point to my_cb; my_arg can be retrieved as cb->arg.
* my_callback should return 1 if it wants BN_is_prime_ex()
* to continue, or 0 to stop.
*/
This is a first-cut at improving the callback mechanisms used in key-generation and prime-checking functions. Rather than explicitly passing callback functions and caller-defined context data for the callbacks, a new structure BN_GENCB is defined that encapsulates this; a pointer to the structure is passed to all such functions instead. This wrapper structure allows the encapsulation of "old" and "new" style callbacks - "new" callbacks return a boolean result on the understanding that returning FALSE should terminate keygen/primality processing. The BN_GENCB abstraction will allow future callback modifications without needing to break binary compatibility nor change the API function prototypes. The new API functions have been given names ending in "_ex" and the old functions are implemented as wrappers to the new ones. The OPENSSL_NO_DEPRECATED symbol has been introduced so that, if defined, declaration of the older functions will be skipped. NB: Some openssl-internal code will stick with the older callbacks for now, so appropriate "#undef" logic will be put in place - this is in case the user is *building* openssl (rather than *including* its headers) with this symbol defined. There is another change in the new _ex functions; the key-generation functions do not return key structures but operate on structures passed by the caller, the return value is a boolean. This will allow for a smoother transition to having key-generation as "virtual function" in the various ***_METHOD tables.
2002-12-08 13:24:31 +08:00
[Geoff Thorpe]
*) Change the ZLIB compression method to be stateful, and make it
available to TLS with the number defined in
draft-ietf-tls-compression-04.txt.
[Richard Levitte]
*) Add the ASN.1 structures and functions for CertificatePair, which
is defined as follows (according to X.509_4thEditionDraftV6.pdf):
CertificatePair ::= SEQUENCE {
forward [0] Certificate OPTIONAL,
reverse [1] Certificate OPTIONAL,
-- at least one of the pair shall be present -- }
Also implement the PEM functions to read and write certificate
pairs, and defined the PEM tag as "CERTIFICATE PAIR".
This needed to be defined, mostly for the sake of the LDAP
attribute crossCertificatePair, but may prove useful elsewhere as
well.
[Richard Levitte]
*) Make it possible to inhibit symlinking of shared libraries in
Makefile.shared, for Cygwin's sake.
[Richard Levitte]
*) Extend the BIGNUM API by creating a function
void BN_set_negative(BIGNUM *a, int neg);
and a macro that behave like
int BN_is_negative(const BIGNUM *a);
to avoid the need to access 'a->neg' directly in applications.
[Nils Larsch]
*) Implement fast modular reduction for pseudo-Mersenne primes
used in NIST curves (crypto/bn/bn_nist.c, crypto/ec/ecp_nist.c).
EC_GROUP_new_curve_GFp() will now automatically use this
if applicable.
[Nils Larsch <nla@trustcenter.de>]
*) Add new lock type (CRYPTO_LOCK_BN).
[Bodo Moeller]
*) Change the ENGINE framework to automatically load engines
dynamically from specific directories unless they could be
found to already be built in or loaded. Move all the
current engines except for the cryptodev one to a new
directory engines/.
The engines in engines/ are built as shared libraries if
the "shared" options was given to ./Configure or ./config.
Otherwise, they are inserted in libcrypto.a.
/usr/local/ssl/engines is the default directory for dynamic
engines, but that can be overridden at configure time through
the usual use of --prefix and/or --openssldir, and at run
time with the environment variable OPENSSL_ENGINES.
[Geoff Thorpe and Richard Levitte]
*) Add Makefile.shared, a helper makefile to build shared
libraries. Adapt Makefile.org.
[Richard Levitte]
*) Add version info to Win32 DLLs.
[Peter 'Luna' Runestig" <peter@runestig.com>]
*) Add new 'medium level' PKCS#12 API. Certificates and keys
can be added using this API to created arbitrary PKCS#12
files while avoiding the low level API.
New options to PKCS12_create(), key or cert can be NULL and
will then be omitted from the output file. The encryption
algorithm NIDs can be set to -1 for no encryption, the mac
iteration count can be set to 0 to omit the mac.
Enhance pkcs12 utility by making the -nokeys and -nocerts
options work when creating a PKCS#12 file. New option -nomac
to omit the mac, NONE can be set for an encryption algorithm.
New code is modified to use the enhanced PKCS12_create()
instead of the low level API.
[Steve Henson]
*) Extend ASN1 encoder to support indefinite length constructed
encoding. This can output sequences tags and octet strings in
this form. Modify pk7_asn1.c to support indefinite length
encoding. This is experimental and needs additional code to
be useful, such as an ASN1 bio and some enhanced streaming
PKCS#7 code.
Extend template encode functionality so that tagging is passed
down to the template encoder.
[Steve Henson]
*) Let 'openssl req' fail if an argument to '-newkey' is not
recognized instead of using RSA as a default.
[Bodo Moeller]
*) Add support for ECC-based ciphersuites from draft-ietf-tls-ecc-01.txt.
As these are not official, they are not included in "ALL";
the "ECCdraft" ciphersuite group alias can be used to select them.
[Vipul Gupta and Sumit Gupta (Sun Microsystems Laboratories)]
*) Add ECDH engine support.
[Nils Gura and Douglas Stebila (Sun Microsystems Laboratories)]
*) Add ECDH in new directory crypto/ecdh/.
[Douglas Stebila (Sun Microsystems Laboratories)]
*) Let BN_rand_range() abort with an error after 100 iterations
without success (which indicates a broken PRNG).
[Bodo Moeller]
*) Change BN_mod_sqrt() so that it verifies that the input value
is really the square of the return value. (Previously,
BN_mod_sqrt would show GIGO behaviour.)
[Bodo Moeller]
*) Add named elliptic curves over binary fields from X9.62, SECG,
and WAP/WTLS; add OIDs that were still missing.
[Sheueling Chang Shantz and Douglas Stebila
(Sun Microsystems Laboratories)]
*) Extend the EC library for elliptic curves over binary fields
(new files ec2_smpl.c, ec2_smpt.c, ec2_mult.c in crypto/ec/).
New EC_METHOD:
EC_GF2m_simple_method
New API functions:
EC_GROUP_new_curve_GF2m
EC_GROUP_set_curve_GF2m
EC_GROUP_get_curve_GF2m
EC_POINT_set_affine_coordinates_GF2m
EC_POINT_get_affine_coordinates_GF2m
EC_POINT_set_compressed_coordinates_GF2m
Point compression for binary fields is disabled by default for
patent reasons (compile with OPENSSL_EC_BIN_PT_COMP defined to
enable it).
As binary polynomials are represented as BIGNUMs, various members
of the EC_GROUP and EC_POINT data structures can be shared
between the implementations for prime fields and binary fields;
the above ..._GF2m functions (except for EX_GROUP_new_curve_GF2m)
are essentially identical to their ..._GFp counterparts.
2002-08-02 21:52:19 +08:00
(For simplicity, the '..._GFp' prefix has been dropped from
various internal method names.)
An internal 'field_div' method (similar to 'field_mul' and
'field_sqr') has been added; this is used only for binary fields.
[Sheueling Chang Shantz and Douglas Stebila
(Sun Microsystems Laboratories)]
2002-08-02 21:52:19 +08:00
*) Optionally dispatch EC_POINT_mul(), EC_POINT_precompute_mult()
through methods ('mul', 'precompute_mult').
The generic implementations (now internally called 'ec_wNAF_mul'
and 'ec_wNAF_precomputed_mult') remain the default if these
methods are undefined.
[Sheueling Chang Shantz and Douglas Stebila
(Sun Microsystems Laboratories)]
*) New function EC_GROUP_get_degree, which is defined through
EC_METHOD. For curves over prime fields, this returns the bit
length of the modulus.
[Sheueling Chang Shantz and Douglas Stebila
(Sun Microsystems Laboratories)]
*) New functions EC_GROUP_dup, EC_POINT_dup.
(These simply call ..._new and ..._copy).
[Sheueling Chang Shantz and Douglas Stebila
(Sun Microsystems Laboratories)]
*) Add binary polynomial arithmetic software in crypto/bn/bn_gf2m.c.
Polynomials are represented as BIGNUMs (where the sign bit is not
used) in the following functions [macros]:
BN_GF2m_add
BN_GF2m_sub [= BN_GF2m_add]
BN_GF2m_mod [wrapper for BN_GF2m_mod_arr]
BN_GF2m_mod_mul [wrapper for BN_GF2m_mod_mul_arr]
BN_GF2m_mod_sqr [wrapper for BN_GF2m_mod_sqr_arr]
BN_GF2m_mod_inv
BN_GF2m_mod_exp [wrapper for BN_GF2m_mod_exp_arr]
BN_GF2m_mod_sqrt [wrapper for BN_GF2m_mod_sqrt_arr]
BN_GF2m_mod_solve_quad [wrapper for BN_GF2m_mod_solve_quad_arr]
BN_GF2m_cmp [= BN_ucmp]
(Note that only the 'mod' functions are actually for fields GF(2^m).
BN_GF2m_add() is misnomer, but this is for the sake of consistency.)
For some functions, an the irreducible polynomial defining a
field can be given as an 'unsigned int[]' with strictly
decreasing elements giving the indices of those bits that are set;
i.e., p[] represents the polynomial
f(t) = t^p[0] + t^p[1] + ... + t^p[k]
where
p[0] > p[1] > ... > p[k] = 0.
This applies to the following functions:
BN_GF2m_mod_arr
BN_GF2m_mod_mul_arr
BN_GF2m_mod_sqr_arr
BN_GF2m_mod_inv_arr [wrapper for BN_GF2m_mod_inv]
BN_GF2m_mod_div_arr [wrapper for BN_GF2m_mod_div]
BN_GF2m_mod_exp_arr
BN_GF2m_mod_sqrt_arr
BN_GF2m_mod_solve_quad_arr
BN_GF2m_poly2arr
BN_GF2m_arr2poly
Conversion can be performed by the following functions:
BN_GF2m_poly2arr
BN_GF2m_arr2poly
bntest.c has additional tests for binary polynomial arithmetic.
Two implementations for BN_GF2m_mod_div() are available.
The default algorithm simply uses BN_GF2m_mod_inv() and
BN_GF2m_mod_mul(). The alternative algorithm is compiled in only
if OPENSSL_SUN_GF2M_DIV is defined (patent pending; read the
copyright notice in crypto/bn/bn_gf2m.c before enabling it).
[Sheueling Chang Shantz and Douglas Stebila
(Sun Microsystems Laboratories)]
*) Add new error code 'ERR_R_DISABLED' that can be used when some
functionality is disabled at compile-time.
[Douglas Stebila <douglas.stebila@sun.com>]
*) Change default behaviour of 'openssl asn1parse' so that more
information is visible when viewing, e.g., a certificate:
Modify asn1_parse2 (crypto/asn1/asn1_par.c) so that in non-'dump'
mode the content of non-printable OCTET STRINGs is output in a
style similar to INTEGERs, but with '[HEX DUMP]' prepended to
avoid the appearance of a printable string.
[Nils Larsch <nla@trustcenter.de>]
*) Add 'asn1_flag' and 'asn1_form' member to EC_GROUP with access
functions
EC_GROUP_set_asn1_flag()
EC_GROUP_get_asn1_flag()
EC_GROUP_set_point_conversion_form()
EC_GROUP_get_point_conversion_form()
These control ASN1 encoding details:
2002-06-12 22:19:01 +08:00
- Curves (i.e., groups) are encoded explicitly unless asn1_flag
has been set to OPENSSL_EC_NAMED_CURVE.
- Points are encoded in uncompressed form by default; options for
asn1_for are as for point2oct, namely
POINT_CONVERSION_COMPRESSED
POINT_CONVERSION_UNCOMPRESSED
POINT_CONVERSION_HYBRID
Also add 'seed' and 'seed_len' members to EC_GROUP with access
functions
EC_GROUP_set_seed()
EC_GROUP_get0_seed()
EC_GROUP_get_seed_len()
This is used only for ASN1 purposes (so far).
[Nils Larsch <nla@trustcenter.de>]
*) Add 'field_type' member to EC_METHOD, which holds the NID
of the appropriate field type OID. The new function
EC_METHOD_get_field_type() returns this value.
[Nils Larsch <nla@trustcenter.de>]
*) Add functions
EC_POINT_point2bn()
EC_POINT_bn2point()
EC_POINT_point2hex()
EC_POINT_hex2point()
providing useful interfaces to EC_POINT_point2oct() and
EC_POINT_oct2point().
[Nils Larsch <nla@trustcenter.de>]
*) Change internals of the EC library so that the functions
EC_GROUP_set_generator()
EC_GROUP_get_generator()
EC_GROUP_get_order()
EC_GROUP_get_cofactor()
are implemented directly in crypto/ec/ec_lib.c and not dispatched
to methods, which would lead to unnecessary code duplication when
adding different types of curves.
[Nils Larsch <nla@trustcenter.de> with input by Bodo Moeller]
2002-05-06 07:47:46 +08:00
*) Implement compute_wNAF (crypto/ec/ec_mult.c) without BIGNUM
arithmetic, and such that modified wNAFs are generated
(which avoid length expansion in many cases).
[Bodo Moeller]
*) Add a function EC_GROUP_check_discriminant() (defined via
EC_METHOD) that verifies that the curve discriminant is non-zero.
Add a function EC_GROUP_check() that makes some sanity tests
on a EC_GROUP, its generator and order. This includes
EC_GROUP_check_discriminant().
[Nils Larsch <nla@trustcenter.de>]
*) Add ECDSA in new directory crypto/ecdsa/.
Add applications 'openssl ecparam' and 'openssl ecdsa'
(these are based on 'openssl dsaparam' and 'openssl dsa').
ECDSA support is also included in various other files across the
library. Most notably,
- 'openssl req' now has a '-newkey ecdsa:file' option;
- EVP_PKCS82PKEY (crypto/evp/evp_pkey.c) now can handle ECDSA;
- X509_PUBKEY_get (crypto/asn1/x_pubkey.c) and
d2i_PublicKey (crypto/asn1/d2i_pu.c) have been modified to make
them suitable for ECDSA where domain parameters must be
extracted before the specific public key;
- ECDSA engine support has been added.
2002-02-20 20:38:00 +08:00
[Nils Larsch <nla@trustcenter.de>]
*) Include some named elliptic curves, and add OIDs from X9.62,
2002-09-02 15:12:08 +08:00
SECG, and WAP/WTLS. Each curve can be obtained from the new
function
EC_GROUP_new_by_curve_name(),
2002-09-02 15:12:08 +08:00
and the list of available named curves can be obtained with
EC_get_builtin_curves().
Also add a 'curve_name' member to EC_GROUP objects, which can be
accessed via
EC_GROUP_set_curve_name()
EC_GROUP_get_curve_name()
[Nils Larsch <larsch@trustcenter.de, Bodo Moeller]
2003-01-25 06:28:32 +08:00
*) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
was actually never needed) and in BN_mul(). The removal in BN_mul()
required a small change in bn_mul_part_recursive() and the addition
of the functions bn_cmp_part_words(), bn_sub_part_words() and
bn_add_part_words(), which do the same thing as bn_cmp_words(),
bn_sub_words() and bn_add_words() except they take arrays with
differing sizes.
[Richard Levitte]
Changes between 0.9.7l and 0.9.7m [23 Feb 2007]
2007-02-21 21:49:35 +08:00
*) Cleanse PEM buffers before freeing them since they may contain
sensitive data.
[Benjamin Bennett <ben@psc.edu>]
*) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
a ciphersuite string such as "DEFAULT:RSA" cannot enable
authentication-only ciphersuites.
[Bodo Moeller]
*) Since AES128 and AES256 share a single mask bit in the logic of
ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
kludge to work properly if AES128 is available and AES256 isn't.
[Victor Duchovni]
*) Expand security boundary to match 1.1.1 module.
[Steve Henson]
*) Remove redundant features: hash file source, editing of test vectors
modify fipsld to use external fips_premain.c signature.
[Steve Henson]
*) New perl script mkfipsscr.pl to create shell scripts or batch files to
run algorithm test programs.
[Steve Henson]
*) Make algorithm test programs more tolerant of whitespace.
[Steve Henson]
*) Have SSL/TLS server implementation tolerate "mismatched" record
protocol version while receiving ClientHello even if the
ClientHello is fragmented. (The server can't insist on the
particular protocol version it has chosen before the ServerHello
message has informed the client about his choice.)
[Bodo Moeller]
*) Load error codes if they are not already present instead of using a
static variable. This allows them to be cleanly unloaded and reloaded.
[Steve Henson]
2006-09-28 21:35:01 +08:00
Changes between 0.9.7k and 0.9.7l [28 Sep 2006]
*) Introduce limits to prevent malicious keys being able to
cause a denial of service. (CVE-2006-2940)
[Steve Henson, Bodo Moeller]
*) Fix ASN.1 parsing of certain invalid structures that can result
in a denial of service. (CVE-2006-2937) [Steve Henson]
*) Fix buffer overflow in SSL_get_shared_ciphers() function.
(CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
*) Fix SSL client code which could crash if connecting to a
malicious SSLv2 server. (CVE-2006-4343)
[Tavis Ormandy and Will Drewry, Google Security Team]
2006-09-12 22:42:19 +08:00
*) Change ciphersuite string processing so that an explicit
ciphersuite selects this one ciphersuite (so that "AES256-SHA"
will no longer include "AES128-SHA"), and any other similar
ciphersuite (same bitmap) from *other* protocol versions (so that
"RC4-MD5" will still include both the SSL 2.0 ciphersuite and the
SSL 3.0/TLS 1.0 ciphersuite). This is a backport combining
changes from 0.9.8b and 0.9.8d.
[Bodo Moeller]
Changes between 0.9.7j and 0.9.7k [05 Sep 2006]
*) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
(CVE-2006-4339) [Ben Laurie and Google Security Team]
2006-06-14 16:55:23 +08:00
*) Change the Unix randomness entropy gathering to use poll() when
possible instead of select(), since the latter has some
undesirable limitations.
[Darryl Miles via Richard Levitte and Bodo Moeller]
2006-06-15 01:51:46 +08:00
*) Disable rogue ciphersuites:
- SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
- SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
- SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
The latter two were purportedly from
draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
appear there.
Also deactive the remaining ciphersuites from
draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
unofficial, and the ID has long expired.
[Bodo Moeller]
*) Fix RSA blinding Heisenbug (problems sometimes occurred on
2006-06-14 16:55:23 +08:00
dual-core machines) and other potential thread-safety issues.
[Bodo Moeller]
Changes between 0.9.7i and 0.9.7j [04 May 2006]
*) Adapt fipsld and the build system to link against the validated FIPS
module in FIPS mode.
[Steve Henson]
*) Fixes for VC++ 2005 build under Windows.
[Steve Henson]
*) Add new Windows build target VC-32-GMAKE for VC++. This uses GNU make
from a Windows bash shell such as MSYS. It is autodetected from the
2006-06-14 16:55:23 +08:00
"config" script when run from a VC++ environment. Modify standard VC++
build to use fipscanister.o from the GNU make build.
[Steve Henson]
2005-10-15 12:26:57 +08:00
Changes between 0.9.7h and 0.9.7i [14 Oct 2005]
*) Wrapped the definition of EVP_MAX_MD_SIZE in a #ifdef OPENSSL_FIPS.
The value now differs depending on if you build for FIPS or not.
BEWARE! A program linked with a shared FIPSed libcrypto can't be
safely run with a non-FIPSed libcrypto, as it may crash because of
the difference induced by this change.
[Andy Polyakov]
Changes between 0.9.7g and 0.9.7h [11 Oct 2005]
*) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
(part of SSL_OP_ALL). This option used to disable the
countermeasure against man-in-the-middle protocol-version
rollback in the SSL 2.0 server implementation, which is a bad
2005-10-19 19:00:39 +08:00
idea. (CVE-2005-2969)
[Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
for Information Security, National Institute of Advanced Industrial
Science and Technology [AIST], Japan)]
2005-06-03 04:11:16 +08:00
*) Minimal support for X9.31 signatures and PSS padding modes. This is
2005-06-03 04:29:32 +08:00
mainly for FIPS compliance and not fully integrated at this stage.
2005-06-03 04:11:16 +08:00
[Steve Henson]
*) For DSA signing, unless DSA_FLAG_NO_EXP_CONSTTIME is set, perform
the exponentiation using a fixed-length exponent. (Otherwise,
the information leaked through timing could expose the secret key
after many signatures; cf. Bleichenbacher's attack on DSA with
biased k.)
[Bodo Moeller]
*) Make a new fixed-window mod_exp implementation the default for
RSA, DSA, and DH private-key operations so that the sequence of
squares and multiplies and the memory access pattern are
independent of the particular secret key. This will mitigate
cache-timing and potential related attacks.
BN_mod_exp_mont_consttime() is the new exponentiation implementation,
and this is automatically used by BN_mod_exp_mont() if the new flag
BN_FLG_EXP_CONSTTIME is set for the exponent. RSA, DSA, and DH
will use this BN flag for private exponents unless the flag
RSA_FLAG_NO_EXP_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME, or
DH_FLAG_NO_EXP_CONSTTIME, respectively, is set.
[Matthew D Wood (Intel Corp), with some changes by Bodo Moeller]
*) Change the client implementation for SSLv23_method() and
SSLv23_client_method() so that is uses the SSL 3.0/TLS 1.0
Client Hello message format if the SSL_OP_NO_SSLv2 option is set.
(Previously, the SSL 2.0 backwards compatible Client Hello
message format would be used even with SSL_OP_NO_SSLv2.)
[Bodo Moeller]
2005-05-01 20:46:57 +08:00
*) Add support for smime-type MIME parameter in S/MIME messages which some
clients need.
[Steve Henson]
*) New function BN_MONT_CTX_set_locked() to set montgomery parameters in
a threadsafe manner. Modify rsa code to use new function and add calls
to dsa and dh code (which had race conditions before).
[Steve Henson]
*) Include the fixed error library code in the C error file definitions
instead of fixing them up at runtime. This keeps the error code
structures constant.
[Steve Henson]
Changes between 0.9.7f and 0.9.7g [11 Apr 2005]
2005-03-24 08:14:59 +08:00
[NB: OpenSSL 0.9.7h and later 0.9.7 patch levels were released after
OpenSSL 0.9.8.]
*) Fixes for newer kerberos headers. NB: the casts are needed because
the 'length' field is signed on one version and unsigned on another
with no (?) obvious way to tell the difference, without these VC++
complains. Also the "definition" of FAR (blank) is no longer included
nor is the error ENOMEM. KRB5_PRIVATE has to be set to 1 to pick up
some needed definitions.
[Steve Henson]
2005-03-24 08:14:59 +08:00
*) Undo Cygwin change.
[Ulf Möller]
2005-03-24 08:14:59 +08:00
*) Added support for proxy certificates according to RFC 3820.
Because they may be a security thread to unaware applications,
they must be explicitly allowed in run-time. See
docs/HOWTO/proxy_certificates.txt for further information.
[Richard Levitte]
Changes between 0.9.7e and 0.9.7f [22 Mar 2005]
2004-11-29 19:57:00 +08:00
*) Use (SSL_RANDOM_VALUE - 4) bytes of pseudo random data when generating
server and client random values. Previously
(SSL_RANDOM_VALUE - sizeof(time_t)) would be used which would result in
less random data when sizeof(time_t) > 4 (some 64 bit platforms).
This change has negligible security impact because:
1. Server and client random values still have 24 bytes of pseudo random
data.
2. Server and client random values are sent in the clear in the initial
handshake.
3. The master secret is derived using the premaster secret (48 bytes in
size for static RSA ciphersuites) as well as client server and random
values.
The OpenSSL team would like to thank the UK NISCC for bringing this issue
to our attention.
[Stephen Henson, reported by UK NISCC]
2005-03-19 19:39:17 +08:00
*) Use Windows randomness collection on Cygwin.
[Ulf Möller]
2005-03-19 19:39:17 +08:00
*) Fix hang in EGD/PRNGD query when communication socket is closed
prematurely by EGD/PRNGD.
[Darren Tucker <dtucker@zip.com.au> via Lutz Jänicke, resolves #1014]
*) Prompt for pass phrases when appropriate for PKCS12 input format.
[Steve Henson]
*) Back-port of selected performance improvements from development
branch, as well as improved support for PowerPC platforms.
[Andy Polyakov]
*) Add lots of checks for memory allocation failure, error codes to indicate
failure and freeing up memory if a failure occurs.
[Nauticus Networks SSL Team <openssl@nauticusnet.com>, Steve Henson]
2004-12-03 20:26:56 +08:00
*) Add new -passin argument to dgst.
[Steve Henson]
*) Perform some character comparisons of different types in X509_NAME_cmp:
this is needed for some certificates that re-encode DNs into UTF8Strings
(in violation of RFC3280) and can't or won't issue name rollover
certificates.
[Steve Henson]
2004-11-29 19:57:00 +08:00
*) Make an explicit check during certificate validation to see that
the CA setting in each certificate on the chain is correct. As a
side effect always do the following basic checks on extensions,
not just when there's an associated purpose to the check:
- if there is an unhandled critical extension (unless the user
has chosen to ignore this fault)
- if the path length has been exceeded (if one is set at all)
- that certain extensions fit the associated purpose (if one has
been given)
[Richard Levitte]
Changes between 0.9.7d and 0.9.7e [25 Oct 2004]
*) Avoid a race condition when CRLs are checked in a multi threaded
environment. This would happen due to the reordering of the revoked
entries during signature checking and serial number lookup. Now the
encoding is cached and the serial number sort performed under a lock.
Add new STACK function sk_is_sorted().
[Steve Henson]
2004-07-07 01:16:40 +08:00
*) Add Delta CRL to the extension code.
[Steve Henson]
*) Various fixes to s3_pkt.c so alerts are sent properly.
[David Holmes <d.holmes@f5.com>]
*) Reduce the chances of duplicate issuer name and serial numbers (in
violation of RFC3280) using the OpenSSL certificate creation utilities.
This is done by creating a random 64 bit value for the initial serial
number when a serial number file is created or when a self signed
certificate is created using 'openssl req -x509'. The initial serial
number file is created using 'openssl x509 -next_serial' in CA.pl
rather than being initialized to 1.
[Steve Henson]
Changes between 0.9.7c and 0.9.7d [17 Mar 2004]
*) Fix null-pointer assignment in do_change_cipher_spec() revealed
2005-10-19 19:00:39 +08:00
by using the Codenomicon TLS Test Tool (CVE-2004-0079)
[Joe Orton, Steve Henson]
*) Fix flaw in SSL/TLS handshaking when using Kerberos ciphersuites
2005-10-19 19:00:39 +08:00
(CVE-2004-0112)
[Joe Orton, Steve Henson]
*) Make it possible to have multiple active certificates with the same
subject in the CA index file. This is done only if the keyword
'unique_subject' is set to 'no' in the main CA section (default
if 'CA_default') of the configuration file. The value is saved
with the database itself in a separate index attribute file,
named like the index file with '.attr' appended to the name.
[Richard Levitte]
*) X509 verify fixes. Disable broken certificate workarounds when
X509_V_FLAGS_X509_STRICT is set. Check CRL issuer has cRLSign set if
keyUsage extension present. Don't accept CRLs with unhandled critical
extensions: since verify currently doesn't process CRL extensions this
rejects a CRL with *any* critical extensions. Add new verify error codes
for these cases.
[Steve Henson]
*) When creating an OCSP nonce use an OCTET STRING inside the extnValue.
A clarification of RFC2560 will require the use of OCTET STRINGs and
some implementations cannot handle the current raw format. Since OpenSSL
copies and compares OCSP nonces as opaque blobs without any attempt at
parsing them this should not create any compatibility issues.
[Steve Henson]
*) New md flag EVP_MD_CTX_FLAG_REUSE this allows md_data to be reused when
calling EVP_MD_CTX_copy_ex() to avoid calling OPENSSL_malloc(). Without
this HMAC (and other) operations are several times slower than OpenSSL
< 0.9.7.
[Steve Henson]
*) Print out GeneralizedTime and UTCTime in ASN1_STRING_print_ex().
[Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
*) Use the correct content when signing type "other".
[Steve Henson]
Changes between 0.9.7b and 0.9.7c [30 Sep 2003]
*) Fix various bugs revealed by running the NISCC test suite:
Stop out of bounds reads in the ASN1 code when presented with
2005-10-19 19:00:39 +08:00
invalid tags (CVE-2003-0543 and CVE-2003-0544).
2005-10-19 19:00:39 +08:00
Free up ASN1_TYPE correctly if ANY type is invalid (CVE-2003-0545).
If verify callback ignores invalid public key errors don't try to check
certificate signature with the NULL public key.
[Steve Henson]
*) New -ignore_err option in ocsp application to stop the server
exiting on the first error in a request.
[Steve Henson]
*) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
if the server requested one: as stated in TLS 1.0 and SSL 3.0
specifications.
[Steve Henson]
*) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
extra data after the compression methods not only for TLS 1.0
but also for SSL 3.0 (as required by the specification).
[Bodo Moeller; problem pointed out by Matthias Loepfe]
*) Change X509_certificate_type() to mark the key as exported/exportable
when it's 512 *bits* long, not 512 bytes.
[Richard Levitte]
2003-06-10 12:42:38 +08:00
*) Change AES_cbc_encrypt() so it outputs exact multiple of
blocks during encryption.
[Richard Levitte]
*) Various fixes to base64 BIO and non blocking I/O. On write
flushes were not handled properly if the BIO retried. On read
data was not being buffered properly and had various logic bugs.
This also affects blocking I/O when the data being decoded is a
certain size.
[Steve Henson]
*) Various S/MIME bugfixes and compatibility changes:
output correct application/pkcs7 MIME type if
PKCS7_NOOLDMIMETYPE is set. Tolerate some broken signatures.
Output CR+LF for EOL if PKCS7_CRLFEOL is set (this makes opening
of files as .eml work). Correctly handle very long lines in MIME
parser.
[Steve Henson]
Changes between 0.9.7a and 0.9.7b [10 Apr 2003]
*) Countermeasure against the Klima-Pokorny-Rosa extension of
Bleichbacher's attack on PKCS #1 v1.5 padding: treat
a protocol version number mismatch like a decryption error
in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
[Bodo Moeller]
*) Turn on RSA blinding by default in the default implementation
to avoid a timing attack. Applications that don't want it can call
RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
They would be ill-advised to do so in most cases.
2003-04-02 17:50:22 +08:00
[Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
*) Change RSA blinding code so that it works when the PRNG is not
seeded (in this case, the secret RSA exponent is abused as
an unpredictable seed -- if it is not unpredictable, there
2003-04-02 17:50:22 +08:00
is no point in blinding anyway). Make RSA blinding thread-safe
by remembering the creator's thread ID in rsa->blinding and
having all other threads use local one-time blinding factors
(this requires more computation than sharing rsa->blinding, but
avoids excessive locking; and if an RSA object is not shared
between threads, blinding will still be very fast).
[Bodo Moeller]
*) Fixed a typo bug that would cause ENGINE_set_default() to set an
ENGINE as defaults for all supported algorithms irrespective of
the 'flags' parameter. 'flags' is now honoured, so applications
should make sure they are passing it correctly.
[Geoff Thorpe]
*) Target "mingw" now allows native Windows code to be generated in
the Cygwin environment as well as with the MinGW compiler.
[Ulf Moeller]
Changes between 0.9.7 and 0.9.7a [19 Feb 2003]
*) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
via timing by performing a MAC computation even if incorrect
block cipher padding has been found. This is a countermeasure
against active attacks where the attacker has to distinguish
2005-10-19 19:00:39 +08:00
between bad padding and a MAC verification error. (CVE-2003-0078)
[Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
Martin Vuagnoux (EPFL, Ilion)]
2002-12-31 08:02:10 +08:00
2003-02-18 20:14:57 +08:00
*) Make the no-err option work as intended. The intention with no-err
is not to have the whole error stack handling routines removed from
libcrypto, it's only intended to remove all the function name and
reason texts, thereby removing some of the footprint that may not
be interesting if those errors aren't displayed anyway.
NOTE: it's still possible for any application or module to have it's
own set of error texts inserted. The routines are there, just not
used by default when no-err is given.
[Richard Levitte]
2003-02-14 21:30:35 +08:00
*) Add support for FreeBSD on IA64.
[dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
*) Adjust DES_cbc_cksum() so it returns the same value as the MIT
Kerberos function mit_des_cbc_cksum(). Before this change,
the value returned by DES_cbc_cksum() was like the one from
mit_des_cbc_cksum(), except the bytes were swapped.
[Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
2003-02-13 01:06:02 +08:00
*) Allow an application to disable the automatic SSL chain building.
Before this a rather primitive chain build was always performed in
ssl3_output_cert_chain(): an application had no way to send the
correct chain if the automatic operation produced an incorrect result.
Now the chain builder is disabled if either:
1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
The reasoning behind this is that an application would not want the
auto chain building to take place if extra chain certificates are
present and it might also want a means of sending no additional
certificates (for example the chain has two certificates and the
root is omitted).
[Steve Henson]
*) Add the possibility to build without the ENGINE framework.
[Steven Reddie <smr@essemer.com.au> via Richard Levitte]
*) Under Win32 gmtime() can return NULL: check return value in
OPENSSL_gmtime(). Add error code for case where gmtime() fails.
[Steve Henson]
*) DSA routines: under certain error conditions uninitialized BN objects
could be freed. Solution: make sure initialization is performed early
enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
Nils Larsch <nla@trustcenter.de> via PR#459)
[Lutz Jaenicke]
*) Another fix for SSLv2 session ID handling: the session ID was incorrectly
checked on reconnect on the client side, therefore session resumption
could still fail with a "ssl session id is different" error. This
behaviour is masked when SSL_OP_ALL is used due to
SSL_OP_MICROSOFT_SESS_ID_BUG being set.
Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
followup to PR #377.
[Lutz Jaenicke]
2003-01-14 01:16:25 +08:00
*) IA-32 assembler support enhancements: unified ELF targets, support
for SCO/Caldera platforms, fix for Cygwin shared build.
[Andy Polyakov]
*) Add support for FreeBSD on sparc64. As a consequence, support for
FreeBSD on non-x86 processors is separate from x86 processors on
the config script, much like the NetBSD support.
[Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
2002-12-31 08:02:10 +08:00
Changes between 0.9.6h and 0.9.7 [31 Dec 2002]
[NB: OpenSSL 0.9.6i and later 0.9.6 patch levels were released after
OpenSSL 0.9.7.]
*) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
code (06) was taken as the first octet of the session ID and the last
octet was ignored consequently. As a result SSLv2 client side session
caching could not have worked due to the session ID mismatch between
client and server.
Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
PR #377.
[Lutz Jaenicke]
*) Change the declaration of needed Kerberos libraries to use EX_LIBS
instead of the special (and badly supported) LIBKRB5. LIBKRB5 is
removed entirely.
[Richard Levitte]
*) The hw_ncipher.c engine requires dynamic locks. Unfortunately, it
seems that in spite of existing for more than a year, many application
author have done nothing to provide the necessary callbacks, which
means that this particular engine will not work properly anywhere.
This is a very unfortunate situation which forces us, in the name
of usability, to give the hw_ncipher.c a static lock, which is part
of libcrypto.
NOTE: This is for the 0.9.7 series ONLY. This hack will never
appear in 0.9.8 or later. We EXPECT application authors to have
dealt properly with this when 0.9.8 is released (unless we actually
make such changes in the libcrypto locking code that changes will
have to be made anyway).
[Richard Levitte]
*) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
octets have been read, EOF or an error occurs. Without this change
some truncated ASN1 structures will not produce an error.
[Steve Henson]
*) Disable Heimdal support, since it hasn't been fully implemented.
Still give the possibility to force the use of Heimdal, but with
warnings and a request that patches get sent to openssl-dev.
[Richard Levitte]
2002-11-16 06:37:18 +08:00
*) Add the VC-CE target, introduce the WINCE sysname, and add
INSTALL.WCE and appropriate conditionals to make it build.
[Steven Reddie <smr@essemer.com.au> via Richard Levitte]
*) Change the DLL names for Cygwin to cygcrypto-x.y.z.dll and
cygssl-x.y.z.dll, where x, y and z are the major, minor and
edit numbers of the version.
[Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
*) Introduce safe string copy and catenation functions
(BUF_strlcpy() and BUF_strlcat()).
[Ben Laurie (CHATS) and Richard Levitte]
*) Avoid using fixed-size buffers for one-line DNs.
[Ben Laurie (CHATS)]
*) Add BUF_MEM_grow_clean() to avoid information leakage when
resizing buffers containing secrets, and use where appropriate.
[Ben Laurie (CHATS)]
*) Avoid using fixed size buffers for configuration file location.
[Ben Laurie (CHATS)]
*) Avoid filename truncation for various CA files.
[Ben Laurie (CHATS)]
*) Use sizeof in preference to magic numbers.
[Ben Laurie (CHATS)]
*) Avoid filename truncation in cert requests.
[Ben Laurie (CHATS)]
*) Add assertions to check for (supposedly impossible) buffer
overflows.
[Ben Laurie (CHATS)]
*) Don't cache truncated DNS entries in the local cache (this could
potentially lead to a spoofing attack).
[Ben Laurie (CHATS)]
*) Fix various buffers to be large enough for hex/decimal
representations in a platform independent manner.
[Ben Laurie (CHATS)]
*) Add CRYPTO_realloc_clean() to avoid information leakage when
resizing buffers containing secrets, and use where appropriate.
[Ben Laurie (CHATS)]
*) Add BIO_indent() to avoid much slightly worrying code to do
indents.
[Ben Laurie (CHATS)]
*) Convert sprintf()/BIO_puts() to BIO_printf().
[Ben Laurie (CHATS)]
*) buffer_gets() could terminate with the buffer only half
full. Fixed.
[Ben Laurie (CHATS)]
*) Add assertions to prevent user-supplied crypto functions from
overflowing internal buffers by having large block sizes, etc.
[Ben Laurie (CHATS)]
2002-11-14 20:17:47 +08:00
*) New OPENSSL_assert() macro (similar to assert(), but enabled
unconditionally).
[Ben Laurie (CHATS)]
*) Eliminate unused copy of key in RC4.
[Ben Laurie (CHATS)]
*) Eliminate unused and incorrectly sized buffers for IV in pem.h.
[Ben Laurie (CHATS)]
*) Fix off-by-one error in EGD path.
[Ben Laurie (CHATS)]
*) If RANDFILE path is too long, ignore instead of truncating.
[Ben Laurie (CHATS)]
*) Eliminate unused and incorrectly sized X.509 structure
CBCParameter.
[Ben Laurie (CHATS)]
*) Eliminate unused and dangerous function knumber().
[Ben Laurie (CHATS)]
*) Eliminate unused and dangerous structure, KSSL_ERR.
[Ben Laurie (CHATS)]
*) Protect against overlong session ID context length in an encoded
session object. Since these are local, this does not appear to be
exploitable.
[Ben Laurie (CHATS)]
*) Change from security patch (see 0.9.6e below) that did not affect
the 0.9.6 release series:
Remote buffer overflow in SSL3 protocol - an attacker could
supply an oversized master key in Kerberos-enabled versions.
2005-10-19 19:00:39 +08:00
(CVE-2002-0657)
[Ben Laurie (CHATS)]
*) Change the SSL kerb5 codes to match RFC 2712.
[Richard Levitte]
2002-09-02 22:22:51 +08:00
*) Make -nameopt work fully for req and add -reqopt switch.
[Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
*) The "block size" for block ciphers in CFB and OFB mode should be 1.
[Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]
*) Make sure tests can be performed even if the corresponding algorithms
have been removed entirely. This was also the last step to make
OpenSSL compilable with DJGPP under all reasonable conditions.
[Richard Levitte, Doug Kaufman <dkaufman@rahul.net>]
2002-07-22 16:39:44 +08:00
*) Add cipher selection rules COMPLEMENTOFALL and COMPLEMENTOFDEFAULT
to allow version independent disabling of normally unselected ciphers,
which may be activated as a side-effect of selecting a single cipher.
2002-07-22 16:39:44 +08:00
(E.g., cipher list string "RSA" enables ciphersuites that are left
out of "ALL" because they do not provide symmetric encryption.
"RSA:!COMPLEMEMENTOFALL" avoids these unsafe ciphersuites.)
[Lutz Jaenicke, Bodo Moeller]
*) Add appropriate support for separate platform-dependent build
directories. The recommended way to make a platform-dependent
build directory is the following (tested on Linux), maybe with
some local tweaks:
# Place yourself outside of the OpenSSL source tree. In
# this example, the environment variable OPENSSL_SOURCE
# is assumed to contain the absolute OpenSSL source directory.
mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
cd objtree/"`uname -s`-`uname -r`-`uname -m`"
(cd $OPENSSL_SOURCE; find . -type f) | while read F; do
mkdir -p `dirname $F`
ln -s $OPENSSL_SOURCE/$F $F
done
To be absolutely sure not to disturb the source tree, a "make clean"
is a good thing. If it isn't successful, don't worry about it,
it probably means the source directory is very clean.
[Richard Levitte]
*) Make sure any ENGINE control commands make local copies of string
pointers passed to them whenever necessary. Otherwise it is possible
the caller may have overwritten (or deallocated) the original string
data when a later ENGINE operation tries to use the stored values.
[Götz Babin-Ebell <babinebell@trustcenter.de>]
2002-06-11 20:41:37 +08:00
*) Improve diagnostics in file reading and command-line digests.
[Ben Laurie aided and abetted by Solar Designer <solar@openwall.com>]
2002-05-31 21:16:10 +08:00
*) Add AES modes CFB and OFB to the object database. Correct an
error in AES-CFB decryption.
[Richard Levitte]
*) Remove most calls to EVP_CIPHER_CTX_cleanup() in evp_enc.c, this
allows existing EVP_CIPHER_CTX structures to be reused after
calling EVP_*Final(). This behaviour is used by encryption
BIOs and some applications. This has the side effect that
applications must explicitly clean up cipher contexts with
EVP_CIPHER_CTX_cleanup() or they will leak memory.
[Steve Henson]
*) Check the values of dna and dnb in bn_mul_recursive before calling
bn_mul_comba (a non zero value means the a or b arrays do not contain
n2 elements) and fallback to bn_mul_normal if either is not zero.
[Steve Henson]
*) Fix escaping of non-ASCII characters when using the -subj option
of the "openssl req" command line tool. (Robert Joop <joop@fokus.gmd.de>)
[Lutz Jaenicke]
*) Make object definitions compliant to LDAP (RFC2256): SN is the short
2002-04-15 22:18:30 +08:00
form for "surname", serialNumber has no short form.
Use "mail" as the short name for "rfc822Mailbox" according to RFC2798;
therefore remove "mail" short name for "internet 7".
The OID for unique identifiers in X509 certificates is
x500UniqueIdentifier, not uniqueIdentifier.
2002-04-15 22:18:30 +08:00
Some more OID additions. (Michael Bell <michael.bell@rz.hu-berlin.de>)
2002-04-12 21:52:40 +08:00
[Lutz Jaenicke]
*) Add an "init" command to the ENGINE config module and auto initialize
ENGINEs. Without any "init" command the ENGINE will be initialized
after all ctrl commands have been executed on it. If init=1 the
ENGINE is initailized at that point (ctrls before that point are run
on the uninitialized ENGINE and after on the initialized one). If
init=0 then the ENGINE will not be iniatialized at all.
[Steve Henson]
*) Fix the 'app_verify_callback' interface so that the user-defined
argument is actually passed to the callback: In the
SSL_CTX_set_cert_verify_callback() prototype, the callback
declaration has been changed from
int (*cb)()
into
int (*cb)(X509_STORE_CTX *,void *);
in ssl_verify_cert_chain (ssl/ssl_cert.c), the call
i=s->ctx->app_verify_callback(&ctx)
has been changed into
i=s->ctx->app_verify_callback(&ctx, s->ctx->app_verify_arg).
To update applications using SSL_CTX_set_cert_verify_callback(),
a dummy argument can be added to their callback functions.
[D. K. Smetters <smetters@parc.xerox.com>]
*) Added the '4758cca' ENGINE to support IBM 4758 cards.
[Maurice Gittens <maurice@gittens.nl>, touchups by Geoff Thorpe]
*) Add and OPENSSL_LOAD_CONF define which will cause
OpenSSL_add_all_algorithms() to load the openssl.cnf config file.
This allows older applications to transparently support certain
OpenSSL features: such as crypto acceleration and dynamic ENGINE loading.
Two new functions OPENSSL_add_all_algorithms_noconf() which will never
load the config file and OPENSSL_add_all_algorithms_conf() which will
always load it have also been added.
[Steve Henson]
*) Add the OFB, CFB and CTR (all with 128 bit feedback) to AES.
2002-02-28 19:29:55 +08:00
Adjust NIDs and EVP layer.
[Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
*) Config modules support in openssl utility.
Most commands now load modules from the config file,
though in a few (such as version) this isn't done
because it couldn't be used for anything.
In the case of ca and req the config file used is
the same as the utility itself: that is the -config
command line option can be used to specify an
alternative file.
[Steve Henson]
*) Move default behaviour from OPENSSL_config(). If appname is NULL
use "openssl_conf" if filename is NULL use default openssl config file.
2002-02-21 08:54:54 +08:00
[Steve Henson]
*) Add an argument to OPENSSL_config() to allow the use of an alternative
2002-02-21 08:54:54 +08:00
config section name. Add a new flag to tolerate a missing config file
and move code to CONF_modules_load_file().
[Steve Henson]
*) Support for crypto accelerator cards from Accelerated Encryption
Processing, www.aep.ie. (Use engine 'aep')
The support was copied from 0.9.6c [engine] and adapted/corrected
to work with the new engine framework.
[AEP Inc. and Richard Levitte]
*) Support for SureWare crypto accelerator cards from Baltimore
Technologies. (Use engine 'sureware')
The support was copied from 0.9.6c [engine] and adapted
to work with the new engine framework.
[Richard Levitte]
*) Have the CHIL engine fork-safe (as defined by nCipher) and actually
make the newer ENGINE framework commands for the CHIL engine work.
[Toomas Kiisk <vix@cyber.ee> and Richard Levitte]
*) Make it possible to produce shared libraries on ReliantUNIX.
[Robert Dahlem <Robert.Dahlem@ffm2.siemens.de> via Richard Levitte]
*) Add the configuration target debug-linux-ppro.
Make 'openssl rsa' use the general key loading routines
implemented in apps.c, and make those routines able to
handle the key format FORMAT_NETSCAPE and the variant
FORMAT_IISSGC.
[Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
2002-04-11 03:52:40 +08:00
*) Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
[Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
*) Add -keyform to rsautl, and document -engine.
2002-01-26 01:00:56 +08:00
[Richard Levitte, inspired by Toomas Kiisk <vix@cyber.ee>]
*) Change BIO_new_file (crypto/bio/bss_file.c) to use new
BIO_R_NO_SUCH_FILE error code rather than the generic
ERR_R_SYS_LIB error code if fopen() fails with ENOENT.
[Ben Laurie]
*) Add new functions
ERR_peek_last_error
ERR_peek_last_error_line
ERR_peek_last_error_line_data.
These are similar to
ERR_peek_error
ERR_peek_error_line
ERR_peek_error_line_data,
but report on the latest error recorded rather than the first one
still in the error queue.
[Ben Laurie, Bodo Moeller]
*) default_algorithms option in ENGINE config module. This allows things
like:
default_algorithms = ALL
default_algorithms = RSA, DSA, RAND, CIPHERS, DIGESTS
[Steve Henson]
*) Preliminary ENGINE config module.
[Steve Henson]
*) New experimental application configuration code.
[Steve Henson]
*) Change the AES code to follow the same name structure as all other
symmetric ciphers, and behave the same way. Move everything to
the directory crypto/aes, thereby obsoleting crypto/rijndael.
[Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
*) SECURITY: remove unsafe setjmp/signal interaction from ui_openssl.c.
2001-12-20 20:18:08 +08:00
[Ben Laurie and Theo de Raadt]
*) Add option to output public keys in req command.
2001-12-02 07:03:30 +08:00
[Massimiliano Pala madwolf@openca.org]
*) Use wNAFs in EC_POINTs_mul() for improved efficiency
(up to about 10% better than before for P-192 and P-224).
2001-11-16 06:32:11 +08:00
[Bodo Moeller]
*) New functions/macros
SSL_CTX_set_msg_callback(ctx, cb)
SSL_CTX_set_msg_callback_arg(ctx, arg)
SSL_set_msg_callback(ssl, cb)
SSL_set_msg_callback_arg(ssl, arg)
to request calling a callback function
void cb(int write_p, int version, int content_type,
const void *buf, size_t len, SSL *ssl, void *arg)
whenever a protocol message has been completely received
(write_p == 0) or sent (write_p == 1). Here 'version' is the
protocol version according to which the SSL library interprets
the current protocol message (SSL2_VERSION, SSL3_VERSION, or
TLS1_VERSION). 'content_type' is 0 in the case of SSL 2.0, or
the content type as defined in the SSL 3.0/TLS 1.0 protocol
specification (change_cipher_spec(20), alert(21), handshake(22)).
'buf' and 'len' point to the actual message, 'ssl' to the
SSL object, and 'arg' is the application-defined value set by
SSL[_CTX]_set_msg_callback_arg().
'openssl s_client' and 'openssl s_server' have new '-msg' options
to enable a callback that displays all protocol messages.
[Bodo Moeller]
*) Change the shared library support so shared libraries are built as
soon as the corresponding static library is finished, and thereby get
openssl and the test programs linked against the shared library.
This still only happens when the keyword "shard" has been given to
the configuration scripts.
NOTE: shared library support is still an experimental thing, and
backward binary compatibility is still not guaranteed.
["Maciej W. Rozycki" <macro@ds2.pg.gda.pl> and Richard Levitte]
*) Add support for Subject Information Access extension.
[Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
*) Make BUF_MEM_grow() behaviour more consistent: Initialise to zero
2001-10-26 22:06:33 +08:00
additional bytes when new memory had to be allocated, not just
when reusing an existing buffer.
[Bodo Moeller]
*) New command line and configuration option 'utf8' for the req command.
This allows field values to be specified as UTF8 strings.
[Steve Henson]
*) Add -multi and -mr options to "openssl speed" - giving multiple parallel
runs for the former and machine-readable output for the latter.
[Ben Laurie]
*) Add '-noemailDN' option to 'openssl ca'. This prevents inclusion
of the e-mail address in the DN (i.e., it will go into a certificate
extension only). The new configuration file option 'email_in_dn = no'
has the same effect.
[Massimiliano Pala madwolf@openca.org]
*) Change all functions with names starting with des_ to be starting
with DES_ instead. Add wrappers that are compatible with libdes,
but are named _ossl_old_des_*. Finally, add macros that map the
des_* symbols to the corresponding _ossl_old_des_* if libdes
compatibility is desired. If OpenSSL 0.9.6c compatibility is
desired, the des_* symbols will be mapped to DES_*, with one
exception.
Since we provide two compatibility mappings, the user needs to
define the macro OPENSSL_DES_LIBDES_COMPATIBILITY if libdes
compatibility is desired. The default (i.e., when that macro
isn't defined) is OpenSSL 0.9.6c compatibility.
There are also macros that enable and disable the support of old
des functions altogether. Those are OPENSSL_ENABLE_OLD_DES_SUPPORT
and OPENSSL_DISABLE_OLD_DES_SUPPORT. If none or both of those
are defined, the default will apply: to support the old des routines.
In either case, one must include openssl/des.h to get the correct
definitions. Do not try to just include openssl/des_old.h, that
won't work.
NOTE: This is a major break of an old API into a new one. Software
authors are encouraged to switch to the DES_ style functions. Some
time in the future, des_old.h and the libdes compatibility functions
will be disable (i.e. OPENSSL_DISABLE_OLD_DES_SUPPORT will be the
default), and then completely removed.
[Richard Levitte]
*) Test for certificates which contain unsupported critical extensions.
If such a certificate is found during a verify operation it is
rejected by default: this behaviour can be overridden by either
handling the new error X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION or
by setting the verify flag X509_V_FLAG_IGNORE_CRITICAL. A new function
X509_supported_extension() has also been added which returns 1 if a
particular extension is supported.
[Steve Henson]
*) Modify the behaviour of EVP cipher functions in similar way to digests
to retain compatibility with existing code.
[Steve Henson]
*) Modify the behaviour of EVP_DigestInit() and EVP_DigestFinal() to retain
2001-10-23 08:54:58 +08:00
compatibility with existing code. In particular the 'ctx' parameter does
not have to be to be initialized before the call to EVP_DigestInit() and
it is tidied up after a call to EVP_DigestFinal(). New function
EVP_DigestFinal_ex() which does not tidy up the ctx. Similarly function
EVP_MD_CTX_copy() changed to not require the destination to be
initialized valid and new function EVP_MD_CTX_copy_ex() added which
requires the destination to be valid.
Modify all the OpenSSL digest calls to use EVP_DigestInit_ex(),
EVP_DigestFinal_ex() and EVP_MD_CTX_copy_ex().
[Steve Henson]
*) Change ssl3_get_message (ssl/s3_both.c) and the functions using it
so that complete 'Handshake' protocol structures are kept in memory
instead of overwriting 'msg_type' and 'length' with 'body' data.
[Bodo Moeller]
*) Add an implementation of SSL_add_dir_cert_subjects_to_stack for Win32.
[Massimo Santin via Richard Levitte]
*) Major restructuring to the underlying ENGINE code. This includes
reduction of linker bloat, separation of pure "ENGINE" manipulation
(initialisation, etc) from functionality dealing with implementations
of specific crypto iterfaces. This change also introduces integrated
support for symmetric ciphers and digest implementations - so ENGINEs
can now accelerate these by providing EVP_CIPHER and EVP_MD
implementations of their own. This is detailed in crypto/engine/README
as it couldn't be adequately described here. However, there are a few
API changes worth noting - some RSA, DSA, DH, and RAND functions that
were changed in the original introduction of ENGINE code have now
reverted back - the hooking from this code to ENGINE is now a good
deal more passive and at run-time, operations deal directly with
RSA_METHODs, DSA_METHODs (etc) as they did before, rather than
dereferencing through an ENGINE pointer any more. Also, the ENGINE
functions dealing with BN_MOD_EXP[_CRT] handlers have been removed -
they were not being used by the framework as there is no concept of a
BIGNUM_METHOD and they could not be generalised to the new
'ENGINE_TABLE' mechanism that underlies the new code. Similarly,
ENGINE_cpy() has been removed as it cannot be consistently defined in
the new code.
[Geoff Thorpe]
*) Change ASN1_GENERALIZEDTIME_check() to allow fractional seconds.
[Steve Henson]
*) Change mkdef.pl to sort symbols that get the same entry number,
and make sure the automatically generated functions ERR_load_*
become part of libeay.num as well.
[Richard Levitte]
*) New function SSL_renegotiate_pending(). This returns true once
renegotiation has been requested (either SSL_renegotiate() call
or HelloRequest/ClientHello received from the peer) and becomes
false once a handshake has been completed.
(For servers, SSL_renegotiate() followed by SSL_do_handshake()
sends a HelloRequest, but does not ensure that a handshake takes
place. SSL_renegotiate_pending() is useful for checking if the
client has followed the request.)
[Bodo Moeller]
*) New SSL option SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION.
By default, clients may request session resumption even during
renegotiation (if session ID contexts permit); with this option,
session resumption is possible only in the first handshake.
SSL_OP_ALL is now 0x00000FFFL instead of 0x000FFFFFL. This makes
more bits available for options that should not be part of
SSL_OP_ALL (such as SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION).
[Bodo Moeller]
*) Add some demos for certificate and certificate request creation.
[Steve Henson]
*) Make maximum certificate chain size accepted from the peer application
settable (SSL*_get/set_max_cert_list()), as proposed by
"Douglas E. Engert" <deengert@anl.gov>.
[Lutz Jaenicke]
*) Add support for shared libraries for Unixware-7
2001-11-13 07:22:29 +08:00
(Boyd Lynn Gerber <gerberb@zenez.com>).
[Lutz Jaenicke]
*) Add a "destroy" handler to ENGINEs that allows structural cleanup to
be done prior to destruction. Use this to unload error strings from
ENGINEs that load their own error strings. NB: This adds two new API
functions to "get" and "set" this destroy handler in an ENGINE.
2001-09-06 18:42:56 +08:00
[Geoff Thorpe]
*) Alter all existing ENGINE implementations (except "openssl" and
2001-09-06 01:50:24 +08:00
"openbsd") to dynamically instantiate their own error strings. This
makes them more flexible to be built both as statically-linked ENGINEs
and self-contained shared-libraries loadable via the "dynamic" ENGINE.
Also, add stub code to each that makes building them as self-contained
shared-libraries easier (see README.ENGINE).
[Geoff Thorpe]
*) Add a "dynamic" ENGINE that provides a mechanism for binding ENGINE
2001-09-06 01:50:24 +08:00
implementations into applications that are completely implemented in
self-contained shared-libraries. The "dynamic" ENGINE exposes control
commands that can be used to configure what shared-library to load and
to control aspects of the way it is handled. Also, made an update to
the README.ENGINE file that brings its information up-to-date and
provides some information and instructions on the "dynamic" ENGINE
(ie. how to use it, how to build "dynamic"-loadable ENGINEs, etc).
[Geoff Thorpe]
*) Make it possible to unload ranges of ERR strings with a new
"ERR_unload_strings" function.
[Geoff Thorpe]
*) Add a copy() function to EVP_MD.
[Ben Laurie]
*) Make EVP_MD routines take a context pointer instead of just the
2001-09-07 14:39:38 +08:00
md_data void pointer.
[Ben Laurie]
*) Add flags to EVP_MD and EVP_MD_CTX. EVP_MD_FLAG_ONESHOT indicates
that the digest can only process a single chunk of data
(typically because it is provided by a piece of
hardware). EVP_MD_CTX_FLAG_ONESHOT indicates that the application
is only going to provide a single chunk of data, and hence the
framework needn't accumulate the data for oneshot drivers.
[Ben Laurie]
*) As with "ERR", make it possible to replace the underlying "ex_data"
2001-09-02 04:20:16 +08:00
functions. This change also alters the storage and management of global
ex_data state - it's now all inside ex_data.c and all "class" code (eg.
RSA, BIO, SSL_CTX, etc) no longer stores its own STACKS and per-class
index counters. The API functions that use this state have been changed
to take a "class_index" rather than pointers to the class's local STACK
and counter, and there is now an API function to dynamically create new
classes. This centralisation allows us to (a) plug a lot of the
thread-safety problems that existed, and (b) makes it possible to clean
up all allocated state using "CRYPTO_cleanup_all_ex_data()". W.r.t. (b)
such data would previously have always leaked in application code and
workarounds were in place to make the memory debugging turn a blind eye
to it. Application code that doesn't use this new function will still
leak as before, but their memory debugging output will announce it now
rather than letting it slide.
Besides the addition of CRYPTO_cleanup_all_ex_data(), another API change
induced by the "ex_data" overhaul is that X509_STORE_CTX_init() now
has a return value to indicate success or failure.
2001-09-02 04:20:16 +08:00
[Geoff Thorpe]
*) Make it possible to replace the underlying "ERR" functions such that the
2001-08-26 01:59:13 +08:00
global state (2 LHASH tables and 2 locks) is only used by the "default"
implementation. This change also adds two functions to "get" and "set"
the implementation prior to it being automatically set the first time
any other ERR function takes place. Ie. an application can call "get",
pass the return value to a module it has just loaded, and that module
can call its own "set" function using that value. This means the
module's "ERR" operations will use (and modify) the error state in the
application and not in its own statically linked copy of OpenSSL code.
[Geoff Thorpe]
*) Give DH, DSA, and RSA types their own "**_up_ref()" function to increment
2001-08-26 01:37:46 +08:00
reference counts. This performs normal REF_PRINT/REF_CHECK macros on
the operation, and provides a more encapsulated way for external code
(crypto/evp/ and ssl/) to do this. Also changed the evp and ssl code
to use these functions rather than manually incrementing the counts.
2001-09-06 05:39:39 +08:00
Also rename "DSO_up()" function to more descriptive "DSO_up_ref()".
2001-08-26 01:37:46 +08:00
[Geoff Thorpe]
*) Add EVP test program.
2001-08-18 21:53:01 +08:00
[Ben Laurie]
*) Add symmetric cipher support to ENGINE. Expect the API to change!
[Ben Laurie]
*) New CRL functions: X509_CRL_set_version(), X509_CRL_set_issuer_name()
X509_CRL_set_lastUpdate(), X509_CRL_set_nextUpdate(), X509_CRL_sort(),
X509_REVOKED_set_serialNumber(), and X509_REVOKED_set_revocationDate().
These allow a CRL to be built without having to access X509_CRL fields
directly. Modify 'ca' application to use new functions.
[Steve Henson]
*) Move SSL_OP_TLS_ROLLBACK_BUG out of the SSL_OP_ALL list of recommended
bug workarounds. Rollback attack detection is a security feature.
2001-08-03 17:28:02 +08:00
The problem will only arise on OpenSSL servers when TLSv1 is not
available (sslv3_server_method() or SSL_OP_NO_TLSv1).
Software authors not wanting to support TLSv1 will have special reasons
for their choice and can explicitly enable this option.
[Bodo Moeller, Lutz Jaenicke]
*) Rationalise EVP so it can be extended: don't include a union of
2002-06-26 22:21:16 +08:00
cipher/digest structures, add init/cleanup functions for EVP_MD_CTX
(similar to those existing for EVP_CIPHER_CTX).
2002-04-09 19:54:24 +08:00
Usage example:
EVP_MD_CTX md;
EVP_MD_CTX_init(&md); /* new function call */
EVP_DigestInit(&md, EVP_sha1());
EVP_DigestUpdate(&md, in, len);
EVP_DigestFinal(&md, out, NULL);
EVP_MD_CTX_cleanup(&md); /* new function call */
[Ben Laurie]
*) Make DES key schedule conform to the usual scheme, as well as
2001-07-31 21:33:58 +08:00
correcting its structure. This means that calls to DES functions
now have to pass a pointer to a des_key_schedule instead of a
plain des_key_schedule (which was actually always a pointer
2002-04-09 19:54:24 +08:00
anyway): E.g.,
des_key_schedule ks;
des_set_key_checked(..., &ks);
des_ncbc_encrypt(..., &ks, ...);
(Note that a later change renames 'des_...' into 'DES_...'.)
[Ben Laurie]
*) Initial reduction of linker bloat: the use of some functions, such as
PEM causes large amounts of unused functions to be linked in due to
poor organisation. For example pem_all.c contains every PEM function
which has a knock on effect of linking in large amounts of (unused)
ASN1 code. Grouping together similar functions and splitting unrelated
functions prevents this.
[Steve Henson]
*) Cleanup of EVP macros.
2002-04-11 03:52:40 +08:00
[Ben Laurie]
*) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
2002-04-11 03:52:40 +08:00
correct _ecb suffix.
[Ben Laurie]
*) Add initial OCSP responder support to ocsp application. The
revocation information is handled using the text based index
use by the ca application. The responder can either handle
requests generated internally, supplied in files (for example
via a CGI script) or using an internal minimal server.
[Steve Henson]
*) Add configuration choices to get zlib compression for TLS.
[Richard Levitte]
*) Changes to Kerberos SSL for RFC 2712 compliance:
1. Implemented real KerberosWrapper, instead of just using
KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
2. Implemented optional authenticator field of KerberosWrapper.
Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
and authenticator structs; see crypto/krb5/.
Generalized Kerberos calls to support multiple Kerberos libraries.
[Vern Staats <staatsvr@asc.hpc.mil>,
Jeffrey Altman <jaltman@columbia.edu>
via Richard Levitte]
*) Cause 'openssl speed' to use fully hard-coded DSA keys as it
already does with RSA. testdsa.h now has 'priv_key/pub_key'
values for each of the key sizes rather than having just
parameters (and 'speed' generating keys each time).
[Geoff Thorpe]
*) Speed up EVP routines.
Before:
encrypt
type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
decrypt
des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
After:
encrypt
des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
decrypt
des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
[Ben Laurie]
*) Added the OS2-EMX target.
2001-07-02 07:15:43 +08:00
["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
*) Rewrite apps to use NCONF routines instead of the old CONF. New functions
to support NCONF routines in extension code. New function CONF_set_nconf()
to allow functions which take an NCONF to also handle the old LHASH
structure: this means that the old CONF compatible routines can be
retained (in particular wrt extensions) without having to duplicate the
code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
[Steve Henson]
*) Enhance the general user interface with mechanisms for inner control
2001-09-07 14:39:38 +08:00
and with possibilities to have yes/no kind of prompts.
2001-06-24 00:27:37 +08:00
[Richard Levitte]
*) Change all calls to low level digest routines in the library and
applications to use EVP. Add missing calls to HMAC_cleanup() and
don't assume HMAC_CTX can be copied using memcpy().
[Verdon Walker <VWalker@novell.com>, Steve Henson]
*) Add the possibility to control engines through control names but with
arbitrary arguments instead of just a string.
Change the key loaders to take a UI_METHOD instead of a callback
function pointer. NOTE: this breaks binary compatibility with earlier
versions of OpenSSL [engine].
2001-09-07 14:39:38 +08:00
Adapt the nCipher code for these new conditions and add a card insertion
callback.
[Richard Levitte]
*) Enhance the general user interface with mechanisms to better support
dialog box interfaces, application-defined prompts, the possibility
to use defaults (for example default passwords from somewhere else)
2001-09-07 14:39:38 +08:00
and interrupts/cancellations.
[Richard Levitte]
*) Tidy up PKCS#12 attribute handling. Add support for the CSP name
attribute in PKCS#12 files, add new -CSP option to pkcs12 utility.
[Steve Henson]
*) Fix a memory leak in 'sk_dup()' in the case reallocation fails. (Also
2001-09-07 14:39:38 +08:00
tidy up some unnecessarily weird code in 'sk_new()').
[Geoff, reported by Diego Tartara <dtartara@novamens.com>]
*) Change the key loading routines for ENGINEs to use the same kind
2001-05-27 00:58:34 +08:00
callback (pem_password_cb) as all other routines that need this
kind of callback.
[Richard Levitte]
*) Increase ENTROPY_NEEDED to 32 bytes, as Rijndael can operate with
256 bit (=32 byte) keys. Of course seeding with more entropy bytes
than this minimum value is recommended.
[Lutz Jaenicke]
*) New random seeder for OpenVMS, using the system process statistics
2001-05-13 18:37:02 +08:00
that are easily reachable.
[Richard Levitte]
*) Windows apparently can't transparently handle global
variables defined in DLLs. Initialisations such as:
const ASN1_ITEM *it = &ASN1_INTEGER_it;
won't compile. This is used by the any applications that need to
2001-09-07 14:39:38 +08:00
declare their own ASN1 modules. This was fixed by adding the option
EXPORT_VAR_AS_FN to all Win32 platforms, although this isn't strictly
needed for static libraries under Win32.
[Steve Henson]
*) New functions X509_PURPOSE_set() and X509_TRUST_set() to handle
setting of purpose and trust fields. New X509_STORE trust and
purpose functions and tidy up setting in other SSL functions.
[Steve Henson]
*) Add copies of X509_STORE_CTX fields and callbacks to X509_STORE
structure. These are inherited by X509_STORE_CTX when it is
initialised. This allows various defaults to be set in the
X509_STORE structure (such as flags for CRL checking and custom
purpose or trust settings) for functions which only use X509_STORE_CTX
internally such as S/MIME.
Modify X509_STORE_CTX_purpose_inherit() so it only sets purposes and
trust settings if they are not set in X509_STORE. This allows X509_STORE
purposes and trust (in S/MIME for example) to override any set by default.
Add command line options for CRL checking to smime, s_client and s_server
applications.
[Steve Henson]
*) Initial CRL based revocation checking. If the CRL checking flag(s)
2001-05-08 06:52:50 +08:00
are set then the CRL is looked up in the X509_STORE structure and
its validity and signature checked, then if the certificate is found
in the CRL the verify fails with a revoked error.
Various new CRL related callbacks added to X509_STORE_CTX structure.
Command line options added to 'verify' application to support this.
This needs some additional work, such as being able to handle multiple
CRLs with different times, extension based lookup (rather than just
by subject name) and ultimately more complete V2 CRL extension
handling.
[Steve Henson]
*) Add a general user interface API (crypto/ui/). This is designed
to replace things like des_read_password and friends (backward
compatibility functions using this new API are provided).
The purpose is to remove prompting functions from the DES code
section as well as provide for prompting through dialog boxes in
a window system and the like.
[Richard Levitte]
*) Add "ex_data" support to ENGINE so implementations can add state at a
2001-04-27 04:42:12 +08:00
per-structure level rather than having to store it globally.
[Geoff]
*) Make it possible for ENGINE structures to be copied when retrieved by
2001-04-27 04:42:12 +08:00
ENGINE_by_id() if the ENGINE specifies a new flag: ENGINE_FLAGS_BY_ID_COPY.
This causes the "original" ENGINE structure to act like a template,
analogous to the RSA vs. RSA_METHOD type of separation. Because of this
operational state can be localised to each ENGINE structure, despite the
fact they all share the same "methods". New ENGINE structures returned in
this case have no functional references and the return value is the single
structural reference. This matches the single structural reference returned
by ENGINE_by_id() normally, when it is incremented on the pre-existing
ENGINE structure.
[Geoff]
*) Fix ASN1 decoder when decoding type ANY and V_ASN1_OTHER: since this
needs to match any other type at all we need to manually clear the
tag cache.
[Steve Henson]
*) Changes to the "openssl engine" utility to include;
- verbosity levels ('-v', '-vv', and '-vvv') that provide information
about an ENGINE's available control commands.
- executing control commands from command line arguments using the
'-pre' and '-post' switches. '-post' is only used if '-t' is
specified and the ENGINE is successfully initialised. The syntax for
the individual commands are colon-separated, for example;
openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
[Geoff]
*) New dynamic control command support for ENGINEs. ENGINEs can now
declare their own commands (numbers), names (strings), descriptions,
and input types for run-time discovery by calling applications. A
subset of these commands are implicitly classed as "executable"
depending on their input type, and only these can be invoked through
the new string-based API function ENGINE_ctrl_cmd_string(). (Eg. this
can be based on user input, config files, etc). The distinction is
that "executable" commands cannot return anything other than a boolean
result and can only support numeric or string input, whereas some
discoverable commands may only be for direct use through
ENGINE_ctrl(), eg. supporting the exchange of binary data, function
pointers, or other custom uses. The "executable" commands are to
support parameterisations of ENGINE behaviour that can be
unambiguously defined by ENGINEs and used consistently across any
OpenSSL-based application. Commands have been added to all the
existing hardware-supporting ENGINEs, noticeably "SO_PATH" to allow
control over shared-library paths without source code alterations.
[Geoff]
*) Changed all ENGINE implementations to dynamically allocate their
ENGINEs rather than declaring them statically. Apart from this being
necessary with the removal of the ENGINE_FLAGS_MALLOCED distinction,
this also allows the implementations to compile without using the
internal engine_int.h header.
[Geoff]
*) Minor adjustment to "rand" code. RAND_get_rand_method() now returns a
'const' value. Any code that should be able to modify a RAND_METHOD
should already have non-const pointers to it (ie. they should only
modify their own ones).
[Geoff]
*) Made a variety of little tweaks to the ENGINE code.
- "atalla" and "ubsec" string definitions were moved from header files
to C code. "nuron" string definitions were placed in variables
rather than hard-coded - allowing parameterisation of these values
later on via ctrl() commands.
- Removed unused "#if 0"'d code.
- Fixed engine list iteration code so it uses ENGINE_free() to release
structural references.
- Constified the RAND_METHOD element of ENGINE structures.
- Constified various get/set functions as appropriate and added
missing functions (including a catch-all ENGINE_cpy that duplicates
all ENGINE values onto a new ENGINE except reference counts/state).
- Removed NULL parameter checks in get/set functions. Setting a method
or function to NULL is a way of cancelling out a previously set
value. Passing a NULL ENGINE parameter is just plain stupid anyway
and doesn't justify the extra error symbols and code.
- Deprecate the ENGINE_FLAGS_MALLOCED define and move the area for
flags from engine_int.h to engine.h.
- Changed prototypes for ENGINE handler functions (init(), finish(),
ctrl(), key-load functions, etc) to take an (ENGINE*) parameter.
[Geoff]
*) Implement binary inversion algorithm for BN_mod_inverse in addition
2001-09-07 14:39:38 +08:00
to the algorithm using long division. The binary algorithm can be
used only if the modulus is odd. On 32-bit systems, it is faster
only for relatively small moduli (roughly 20-30% for 128-bit moduli,
roughly 5-15% for 256-bit moduli), so we use it only for moduli
up to 450 bits. In 64-bit environments, the binary algorithm
appears to be advantageous for much longer moduli; here we use it
for moduli up to 2048 bits.
2001-04-09 02:23:44 +08:00
[Bodo Moeller]
*) Rewrite CHOICE field setting in ASN1_item_ex_d2i(). The old code
could not support the combine flag in choice fields.
[Steve Henson]
*) Add a 'copy_extensions' option to the 'ca' utility. This copies
extensions from a certificate request to the certificate.
[Steve Henson]
*) Allow multiple 'certopt' and 'nameopt' options to be separated
by commas. Add 'namopt' and 'certopt' options to the 'ca' config
file: this allows the display of the certificate about to be
signed to be customised, to allow certain fields to be included
or excluded and extension details. The old system didn't display
multicharacter strings properly, omitted fields not in the policy
and couldn't display additional details such as extensions.
[Steve Henson]
*) Function EC_POINTs_mul for multiple scalar multiplication
2001-11-16 06:32:11 +08:00
of an arbitrary number of elliptic curve points
\sum scalars[i]*points[i],
optionally including the generator defined for the EC_GROUP:
scalar*generator + \sum scalars[i]*points[i].
EC_POINT_mul is a simple wrapper function for the typical case
that the point list has just one item (besides the optional
generator).
[Bodo Moeller]
*) First EC_METHODs for curves over GF(p):
EC_GFp_simple_method() uses the basic BN_mod_mul and BN_mod_sqr
operations and provides various method functions that can also
operate with faster implementations of modular arithmetic.
EC_GFp_mont_method() reuses most functions that are part of
EC_GFp_simple_method, but uses Montgomery arithmetic.
[Bodo Moeller; point addition and point doubling
implementation directly derived from source code provided by
Lenka Fibikova <fibikova@exp-math.uni-essen.de>]
*) Framework for elliptic curves (crypto/ec/ec.h, crypto/ec/ec_lcl.h,
crypto/ec/ec_lib.c):
2001-03-11 07:37:52 +08:00
Curves are EC_GROUP objects (with an optional group generator)
based on EC_METHODs that are built into the library.
Points are EC_POINT objects based on EC_GROUP objects.
Most of the framework would be able to handle curves over arbitrary
2001-03-11 07:37:52 +08:00
finite fields, but as there are no obvious types for fields other
than GF(p), some functions are limited to that for now.
[Bodo Moeller]
*) Add the -HTTP option to s_server. It is similar to -WWW, but requires
that the file contains a complete HTTP response.
[Richard Levitte]
*) Add the ec directory to mkdef.pl and mkfiles.pl. In mkdef.pl
change the def and num file printf format specifier from "%-40sXXX"
to "%-39s XXX". The latter will always guarantee a space after the
field while the former will cause them to run together if the field
is 40 of more characters long.
[Steve Henson]
*) Constify the cipher and digest 'method' functions and structures
and modify related functions to take constant EVP_MD and EVP_CIPHER
pointers.
[Steve Henson]
*) Hide BN_CTX structure details in bn_lcl.h instead of publishing them
in <openssl/bn.h>. Also further increase BN_CTX_NUM to 32.
[Bodo Moeller]
*) Modify EVP_Digest*() routines so they now return values. Although the
internal software routines can never fail additional hardware versions
might.
[Steve Henson]
*) Clean up crypto/err/err.h and change some error codes to avoid conflicts:
2001-03-07 09:19:07 +08:00
Previously ERR_R_FATAL was too small and coincided with ERR_LIB_PKCS7
(= ERR_R_PKCS7_LIB); it is now 64 instead of 32.
ASN1 error codes
ERR_R_NESTED_ASN1_ERROR
...
ERR_R_MISSING_ASN1_EOS
were 4 .. 9, conflicting with
ERR_LIB_RSA (= ERR_R_RSA_LIB)
...
ERR_LIB_PEM (= ERR_R_PEM_LIB).
They are now 58 .. 63 (i.e., just below ERR_R_FATAL).
Add new error code 'ERR_R_INTERNAL_ERROR'.
[Bodo Moeller]
*) Don't overuse locks in crypto/err/err.c: For data retrieval, CRYPTO_r_lock
2001-03-07 09:19:07 +08:00
suffices.
[Bodo Moeller]
*) New option '-subj arg' for 'openssl req' and 'openssl ca'. This
sets the subject name for a new request or supersedes the
subject name in a given request. Formats that can be parsed are
'CN=Some Name, OU=myOU, C=IT'
and
'CN=Some Name/OU=myOU/C=IT'.
Add options '-batch' and '-verbose' to 'openssl req'.
[Massimiliano Pala <madwolf@hackmasters.net>]
*) Introduce the possibility to access global variables through
functions on platform were that's the best way to handle exporting
global variables in shared libraries. To enable this functionality,
one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
"OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
is normally done by Configure or something similar).
To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
in the source file (foo.c) like this:
OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
OPENSSL_IMPLEMENT_GLOBAL(double,bar);
To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
OPENSSL_DECLARE_GLOBAL(int,foo);
#define foo OPENSSL_GLOBAL_REF(foo)
OPENSSL_DECLARE_GLOBAL(double,bar);
#define bar OPENSSL_GLOBAL_REF(bar)
The #defines are very important, and therefore so is including the
2001-09-07 14:39:38 +08:00
header file everywhere where the defined globals are used.
The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
2001-09-07 14:39:38 +08:00
of ASN.1 items, but that structure is a bit different.
The largest change is in util/mkdef.pl which has been enhanced with
better and easier to understand logic to choose which symbols should
go into the Windows .def files as well as a number of fixes and code
cleanup (among others, algorithm keywords are now sorted
lexicographically to avoid constant rewrites).
[Richard Levitte]
*) In BN_div() keep a copy of the sign of 'num' before writing the
result to 'rm' because if rm==num the value will be overwritten
and produce the wrong result if 'num' is negative: this caused
problems with BN_mod() and BN_nnmod().
[Steve Henson]
*) Function OCSP_request_verify(). This checks the signature on an
OCSP request and verifies the signer certificate. The signer
certificate is just checked for a generic purpose and OCSP request
trust settings.
[Steve Henson]
*) Add OCSP_check_validity() function to check the validity of OCSP
responses. OCSP responses are prepared in real time and may only
be a few seconds old. Simply checking that the current time lies
between thisUpdate and nextUpdate max reject otherwise valid responses
2001-09-07 14:39:38 +08:00
caused by either OCSP responder or client clock inaccuracy. Instead
we allow thisUpdate and nextUpdate to fall within a certain period of
the current time. The age of the response can also optionally be
checked. Two new options -validity_period and -status_age added to
ocsp utility.
[Steve Henson]
*) If signature or public key algorithm is unrecognized print out its
2001-09-07 14:39:38 +08:00
OID rather that just UNKNOWN.
[Steve Henson]
*) Change OCSP_cert_to_id() to tolerate a NULL subject certificate and
OCSP_cert_id_new() a NULL serialNumber. This allows a partial certificate
ID to be generated from the issuer certificate alone which can then be
passed to OCSP_id_issuer_cmp().
[Steve Henson]
*) New compilation option ASN1_ITEM_FUNCTIONS. This causes the new
ASN1 modules to export functions returning ASN1_ITEM pointers
instead of the ASN1_ITEM structures themselves. This adds several
new macros which allow the underlying ASN1 function/structure to
be accessed transparently. As a result code should not use ASN1_ITEM
references directly (such as &X509_it) but instead use the relevant
macros (such as ASN1_ITEM_rptr(X509)). This option is to allow
use of the new ASN1 code on platforms where exporting structures
is problematical (for example in shared libraries) but exporting
functions returning pointers to structures is not.
[Steve Henson]
*) Add support for overriding the generation of SSL/TLS session IDs.
These callbacks can be registered either in an SSL_CTX or per SSL.
The purpose of this is to allow applications to control, if they wish,
the arbitrary values chosen for use as session IDs, particularly as it
can be useful for session caching in multiple-server environments. A
command-line switch for testing this (and any client code that wishes
to use such a feature) has been added to "s_server".
[Geoff Thorpe, Lutz Jaenicke]
*) Modify mkdef.pl to recognise and parse preprocessor conditionals
of the form '#if defined(...) || defined(...) || ...' and
'#if !defined(...) && !defined(...) && ...'. This also avoids
the growing number of special cases it was previously handling.
[Richard Levitte]
*) Make all configuration macros available for application by making
sure they are available in opensslconf.h, by giving them names starting
with "OPENSSL_" to avoid conflicts with other packages and by making
sure e_os2.h will cover all platform-specific cases together with
opensslconf.h.
Additionally, it is now possible to define configuration/platform-
specific names (called "system identities"). In the C code, these
are prefixed with "OPENSSL_SYSNAME_". e_os2.h will create another
macro with the name beginning with "OPENSSL_SYS_", which is determined
from "OPENSSL_SYSNAME_*" or compiler-specific macros depending on
what is available.
[Richard Levitte]
*) New option -set_serial to 'req' and 'x509' this allows the serial
number to use to be specified on the command line. Previously self
signed certificates were hard coded with serial number 0 and the
CA options of 'x509' had to use a serial number in a file which was
auto incremented.
[Steve Henson]
*) New options to 'ca' utility to support V2 CRL entry extensions.
Currently CRL reason, invalidity date and hold instruction are
supported. Add new CRL extensions to V3 code and some new objects.
[Steve Henson]
*) New function EVP_CIPHER_CTX_set_padding() this is used to
disable standard block padding (aka PKCS#5 padding) in the EVP
API, which was previously mandatory. This means that the data is
not padded in any way and so the total length much be a multiple
of the block size, otherwise an error occurs.
[Steve Henson]
*) Initial (incomplete) OCSP SSL support.
2001-02-14 09:12:41 +08:00
[Steve Henson]
*) New function OCSP_parse_url(). This splits up a URL into its host,
port and path components: primarily to parse OCSP URLs. New -url
option to ocsp utility.
[Steve Henson]
*) New nonce behavior. The return value of OCSP_check_nonce() now
2001-02-13 07:28:45 +08:00
reflects the various checks performed. Applications can decide
whether to tolerate certain situations such as an absent nonce
in a response when one was present in a request: the ocsp application
just prints out a warning. New function OCSP_add1_basic_nonce()
this is to allow responders to include a nonce in a response even if
the request is nonce-less.
[Steve Henson]
*) Disable stdin buffering in load_cert (apps/apps.c) so that no certs are
2001-02-10 21:12:35 +08:00
skipped when using openssl x509 multiple times on a single input file,
e.g. "(openssl x509 -out cert1; openssl x509 -out cert2) <certs".
[Bodo Moeller]
*) Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string()
set string type: to handle setting ASN1_TIME structures. Fix ca
utility to correctly initialize revocation date of CRLs.
[Steve Henson]
*) New option SSL_OP_CIPHER_SERVER_PREFERENCE allows the server to override
the clients preferred ciphersuites and rather use its own preferences.
Should help to work around M$ SGC (Server Gated Cryptography) bug in
Internet Explorer by ensuring unchanged hash method during stepup.
2001-08-01 18:07:55 +08:00
(Also replaces the broken/deactivated SSL_OP_NON_EXPORT_FIRST option.)
[Lutz Jaenicke]
*) Make mkdef.pl recognise all DECLARE_ASN1 macros, change rijndael
to aes and add a new 'exist' option to print out symbols that don't
appear to exist.
[Steve Henson]
*) Additional options to ocsp utility to allow flags to be set and
additional certificates supplied.
[Steve Henson]
*) Add the option -VAfile to 'openssl ocsp', so the user can give the
OCSP client a number of certificate to only verify the response
signature against.
[Richard Levitte]
*) Update Rijndael code to version 3.0 and change EVP AES ciphers to
handle the new API. Currently only ECB, CBC modes supported. Add new
2002-05-06 07:47:46 +08:00
AES OIDs.
Add TLS AES ciphersuites as described in RFC3268, "Advanced
Encryption Standard (AES) Ciphersuites for Transport Layer
Security (TLS)". (In beta versions of OpenSSL 0.9.7, these were
not enabled by default and were not part of the "ALL" ciphersuite
alias because they were not yet official; they could be
explicitly requested by specifying the "AESdraft" ciphersuite
group alias. In the final release of OpenSSL 0.9.7, the group
alias is called "AES" and is part of "ALL".)
[Ben Laurie, Steve Henson, Bodo Moeller]
*) New function OCSP_copy_nonce() to copy nonce value (if present) from
request to response.
[Steve Henson]
*) Functions for OCSP responders. OCSP_request_onereq_count(),
OCSP_request_onereq_get0(), OCSP_onereq_get0_id() and OCSP_id_get0_info()
extract information from a certificate request. OCSP_response_create()
creates a response and optionally adds a basic response structure.
OCSP_basic_add1_status() adds a complete single response to a basic
2001-09-07 14:39:38 +08:00
response and returns the OCSP_SINGLERESP structure just added (to allow
extensions to be included for example). OCSP_basic_add1_cert() adds a
certificate to a basic response and OCSP_basic_sign() signs a basic
response with various flags. New helper functions ASN1_TIME_check()
(checks validity of ASN1_TIME structure) and ASN1_TIME_to_generalizedtime()
(converts ASN1_TIME to GeneralizedTime).
[Steve Henson]
*) Various new functions. EVP_Digest() combines EVP_Digest{Init,Update,Final}()
in a single operation. X509_get0_pubkey_bitstr() extracts the public_key
2001-09-07 14:39:38 +08:00
structure from a certificate. X509_pubkey_digest() digests the public_key
contents: this is used in various key identifiers.
[Steve Henson]
*) Make sk_sort() tolerate a NULL argument.
[Steve Henson reported by Massimiliano Pala <madwolf@comune.modena.it>]
*) New OCSP verify flag OCSP_TRUSTOTHER. When set the "other" certificates
passed by the function are trusted implicitly. If any of them signed the
2001-09-07 14:39:38 +08:00
response then it is assumed to be valid and is not verified.
[Steve Henson]
*) In PKCS7_set_type() initialise content_type in PKCS7_ENC_CONTENT
to data. This was previously part of the PKCS7 ASN1 code. This
was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures.
[Steve Henson, reported by Kenneth R. Robinette
<support@securenetterm.com>]
*) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1
routines: without these tracing memory leaks is very painful.
Fix leaks in PKCS12 and PKCS7 routines.
[Steve Henson]
*) Make X509_time_adj() cope with the new behaviour of ASN1_TIME_new().
Previously it initialised the 'type' argument to V_ASN1_UTCTIME which
effectively meant GeneralizedTime would never be used. Now it
is initialised to -1 but X509_time_adj() now has to check the value
and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or
V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime.
[Steve Henson, reported by Kenneth R. Robinette
<support@securenetterm.com>]
*) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously
result in a zero length in the ASN1_INTEGER structure which was
not consistent with the structure when d2i_ASN1_INTEGER() was used
and would cause ASN1_INTEGER_cmp() to fail. Enhance s2i_ASN1_INTEGER()
to cope with hex and negative integers. Fix bug in i2a_ASN1_INTEGER()
where it did not print out a minus for negative ASN1_INTEGER.
[Steve Henson]
*) Add summary printout to ocsp utility. The various functions which
convert status values to strings have been renamed to:
OCSP_response_status_str(), OCSP_cert_status_str() and
OCSP_crl_reason_str() and are no longer static. New options
to verify nonce values and to disable verification. OCSP response
printout format cleaned up.
[Steve Henson]
*) Add additional OCSP certificate checks. These are those specified
in RFC2560. This consists of two separate checks: the CA of the
certificate being checked must either be the OCSP signer certificate
or the issuer of the OCSP signer certificate. In the latter case the
OCSP signer certificate must contain the OCSP signing extended key
usage. This check is performed by attempting to match the OCSP
signer or the OCSP signer CA to the issuerNameHash and issuerKeyHash
in the OCSP_CERTID structures of the response.
[Steve Henson]
*) Initial OCSP certificate verification added to OCSP_basic_verify()
and related routines. This uses the standard OpenSSL certificate
verify routines to perform initial checks (just CA validity) and
to obtain the certificate chain. Then additional checks will be
performed on the chain. Currently the root CA is checked to see
if it is explicitly trusted for OCSP signing. This is used to set
a root CA as a global signing root: that is any certificate that
chains to that CA is an acceptable OCSP signing certificate.
[Steve Henson]
*) New '-extfile ...' option to 'openssl ca' for reading X.509v3
extensions from a separate configuration file.
As when reading extensions from the main configuration file,
the '-extensions ...' option may be used for specifying the
section to use.
[Massimiliano Pala <madwolf@comune.modena.it>]
*) New OCSP utility. Allows OCSP requests to be generated or
read. The request can be sent to a responder and the output
parsed, outputed or printed in text form. Not complete yet:
still needs to check the OCSP response validity.
[Steve Henson]
*) New subcommands for 'openssl ca':
'openssl ca -status <serial>' prints the status of the cert with
the given serial number (according to the index file).
'openssl ca -updatedb' updates the expiry status of certificates
in the index file.
[Massimiliano Pala <madwolf@comune.modena.it>]
*) New '-newreq-nodes' command option to CA.pl. This is like
'-newreq', but calls 'openssl req' with the '-nodes' option
so that the resulting key is not encrypted.
[Damien Miller <djm@mindrot.org>]
*) New configuration for the GNU Hurd.
2001-01-11 20:58:37 +08:00
[Jonathan Bartlett <johnnyb@wolfram.com> via Richard Levitte]
*) Initial code to implement OCSP basic response verify. This
is currently incomplete. Currently just finds the signer's
certificate and verifies the signature on the response.
[Steve Henson]
*) New SSLeay_version code SSLEAY_DIR to determine the compiled-in
value of OPENSSLDIR. This is available via the new '-d' option
to 'openssl version', and is also included in 'openssl version -a'.
[Bodo Moeller]
*) Allowing defining memory allocation callbacks that will be given
file name and line number information in additional arguments
(a const char* and an int). The basic functionality remains, as
well as the original possibility to just replace malloc(),
realloc() and free() by functions that do not know about these
additional arguments. To register and find out the current
settings for extended allocation functions, the following
functions are provided:
CRYPTO_set_mem_ex_functions
CRYPTO_set_locked_mem_ex_functions
CRYPTO_get_mem_ex_functions
CRYPTO_get_locked_mem_ex_functions
These work the same way as CRYPTO_set_mem_functions and friends.
CRYPTO_get_[locked_]mem_functions now writes 0 where such an
extended allocation function is enabled.
Similarly, CRYPTO_get_[locked_]mem_ex_functions writes 0 where
a conventional allocation function is enabled.
[Richard Levitte, Bodo Moeller]
*) Finish off removing the remaining LHASH function pointer casts.
There should no longer be any prototype-casting required when using
the LHASH abstraction, and any casts that remain are "bugs". See
the callback types and macros at the head of lhash.h for details
(and "OBJ_cleanup" in crypto/objects/obj_dat.c as an example).
[Geoff Thorpe]
*) Add automatic query of EGD sockets in RAND_poll() for the unix variant.
If /dev/[u]random devices are not available or do not return enough
entropy, EGD style sockets (served by EGD or PRNGD) will automatically
be queried.
The locations /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool, and
/etc/entropy will be queried once each in this sequence, querying stops
when enough entropy was collected without querying more sockets.
[Lutz Jaenicke]
*) Change the Unix RAND_poll() variant to be able to poll several
random devices, as specified by DEVRANDOM, until a sufficient amount
of data has been collected. We spend at most 10 ms on each file
(select timeout) and read in non-blocking mode. DEVRANDOM now
defaults to the list "/dev/urandom", "/dev/random", "/dev/srandom"
(previously it was just the string "/dev/urandom"), so on typical
platforms the 10 ms delay will never occur.
Also separate out the Unix variant to its own file, rand_unix.c.
For VMS, there's a currently-empty rand_vms.c.
[Richard Levitte]
*) Move OCSP client related routines to ocsp_cl.c. These
provide utility functions which an application needing
to issue a request to an OCSP responder and analyse the
response will typically need: as opposed to those which an
OCSP responder itself would need which will be added later.
OCSP_request_sign() signs an OCSP request with an API similar
to PKCS7_sign(). OCSP_response_status() returns status of OCSP
response. OCSP_response_get1_basic() extracts basic response
from response. OCSP_resp_find_status(): finds and extracts status
information from an OCSP_CERTID structure (which will be created
when the request structure is built). These are built from lower
level functions which work on OCSP_SINGLERESP structures but
won't normally be used unless the application wishes to examine
extensions in the OCSP response for example.
Replace nonce routines with a pair of functions.
OCSP_request_add1_nonce() adds a nonce value and optionally
generates a random value. OCSP_check_nonce() checks the
validity of the nonce in an OCSP response.
[Steve Henson]
*) Change function OCSP_request_add() to OCSP_request_add0_id().
This doesn't copy the supplied OCSP_CERTID and avoids the
need to free up the newly created id. Change return type
to OCSP_ONEREQ to return the internal OCSP_ONEREQ structure.
This can then be used to add extensions to the request.
Deleted OCSP_request_new(), since most of its functionality
is now in OCSP_REQUEST_new() (and the case insensitive name
clash) apart from the ability to set the request name which
will be added elsewhere.
[Steve Henson]
*) Update OCSP API. Remove obsolete extensions argument from
various functions. Extensions are now handled using the new
OCSP extension code. New simple OCSP HTTP function which
can be used to send requests and parse the response.
[Steve Henson]
*) Fix the PKCS#7 (S/MIME) code to work with new ASN1. Two new
ASN1_ITEM structures help with sign and verify. PKCS7_ATTR_SIGN
uses the special reorder version of SET OF to sort the attributes
and reorder them to match the encoded order. This resolves a long
standing problem: a verify on a PKCS7 structure just after signing
it used to fail because the attribute order did not match the
encoded order. PKCS7_ATTR_VERIFY does not reorder the attributes:
it uses the received order. This is necessary to tolerate some broken
software that does not order SET OF. This is handled by encoding
as a SEQUENCE OF but using implicit tagging (with UNIVERSAL class)
to produce the required SET OF.
[Steve Henson]
*) Have mk1mf.pl generate the macros OPENSSL_BUILD_SHLIBCRYPTO and
2000-12-31 08:26:18 +08:00
OPENSSL_BUILD_SHLIBSSL and use them appropriately in the header
files to get correct declarations of the ASN.1 item variables.
[Richard Levitte]
*) Rewrite of PKCS#12 code to use new ASN1 functionality. Replace many
PKCS#12 macros with real functions. Fix two unrelated ASN1 bugs:
asn1_check_tlen() would sometimes attempt to use 'ctx' when it was
NULL and ASN1_TYPE was not dereferenced properly in asn1_ex_c2i().
New ASN1 macro: DECLARE_ASN1_ITEM() which just declares the relevant
ASN1_ITEM and no wrapper functions.
[Steve Henson]
*) New functions or ASN1_item_d2i_fp() and ASN1_item_d2i_bio(). These
replace the old function pointer based I/O routines. Change most of
the *_d2i_bio() and *_d2i_fp() functions to use these.
[Steve Henson]
*) Enhance mkdef.pl to be more accepting about spacing in C preprocessor
lines, recognice more "algorithms" that can be deselected, and make
it complain about algorithm deselection that isn't recognised.
[Richard Levitte]
*) New ASN1 functions to handle dup, sign, verify, digest, pack and
unpack operations in terms of ASN1_ITEM. Modify existing wrappers
to use new functions. Add NO_ASN1_OLD which can be set to remove
some old style ASN1 functions: this can be used to determine if old
code will still work when these eventually go away.
[Steve Henson]
*) New extension functions for OCSP structures, these follow the
2000-12-28 09:05:05 +08:00
same conventions as certificates and CRLs.
[Steve Henson]
*) New function X509V3_add1_i2d(). This automatically encodes and
adds an extension. Its behaviour can be customised with various
flags to append, replace or delete. Various wrappers added for
certificates and CRLs.
[Steve Henson]
*) Fix to avoid calling the underlying ASN1 print routine when
an extension cannot be parsed. Correct a typo in the
OCSP_SERVICELOC extension. Tidy up print OCSP format.
[Steve Henson]
*) Make mkdef.pl parse some of the ASN1 macros and add appropriate
entries for variables.
[Steve Henson]
*) Add functionality to apps/openssl.c for detecting locking
2000-12-16 00:40:35 +08:00
problems: As the program is single-threaded, all we have
to do is register a locking callback using an array for
storing which locks are currently held by the program.
[Bodo Moeller]
*) Use a lock around the call to CRYPTO_get_ex_new_index() in
2000-12-16 00:40:35 +08:00
SSL_get_ex_data_X509_STORE_idx(), which is used in
ssl_verify_cert_chain() and thus can be called at any time
during TLS/SSL handshakes so that thread-safety is essential.
Unfortunately, the ex_data design is not at all suited
for multi-threaded use, so it probably should be abolished.
[Bodo Moeller]
*) Added Broadcom "ubsec" ENGINE to OpenSSL.
2000-12-15 05:49:48 +08:00
[Broadcom, tweaked and integrated by Geoff Thorpe]
*) Move common extension printing code to new function
X509V3_print_extensions(). Reorganise OCSP print routines and
implement some needed OCSP ASN1 functions. Add OCSP extensions.
[Steve Henson]
*) New function X509_signature_print() to remove duplication in some
print routines.
[Steve Henson]
*) Add a special meaning when SET OF and SEQUENCE OF flags are both
set (this was treated exactly the same as SET OF previously). This
is used to reorder the STACK representing the structure to match the
encoding. This will be used to get round a problem where a PKCS7
structure which was signed could not be verified because the STACK
order did not reflect the encoded order.
[Steve Henson]
*) Reimplement the OCSP ASN1 module using the new code.
[Steve Henson]
*) Update the X509V3 code to permit the use of an ASN1_ITEM structure
for its ASN1 operations. The old style function pointers still exist
for now but they will eventually go away.
[Steve Henson]
*) Merge in replacement ASN1 code from the ASN1 branch. This almost
completely replaces the old ASN1 functionality with a table driven
encoder and decoder which interprets an ASN1_ITEM structure describing
the ASN1 module. Compatibility with the existing ASN1 API (i2d,d2i) is
largely maintained. Almost all of the old asn1_mac.h macro based ASN1
has also been converted to the new form.
[Steve Henson]
*) Change BN_mod_exp_recp so that negative moduli are tolerated
(the sign is ignored). Similarly, ignore the sign in BN_MONT_CTX_set
so that BN_mod_exp_mont and BN_mod_exp_mont_word work
for negative moduli.
[Bodo Moeller]
*) Fix BN_uadd and BN_usub: Always return non-negative results instead
of not touching the result's sign bit.
[Bodo Moeller]
*) BN_div bugfix: If the result is 0, the sign (res->neg) must not be
set.
[Bodo Moeller]
*) Changed the LHASH code to use prototypes for callbacks, and created
2000-12-04 11:35:35 +08:00
macros to declare and implement thin (optionally static) functions
that provide type-safety and avoid function pointer casting for the
type-specific callbacks.
[Geoff Thorpe]
*) Added Kerberos Cipher Suites to be used with TLS, as written in
2000-12-05 03:04:55 +08:00
RFC 2712.
[Veers Staats <staatsvr@asc.hpc.mil>,
Jeffrey Altman <jaltman@columbia.edu>, via Richard Levitte]
*) Reformat the FAQ so the different questions and answers can be divided
2000-12-01 09:51:04 +08:00
in sections depending on the subject.
[Richard Levitte]
*) Have the zlib compression code load ZLIB.DLL dynamically under
Windows.
[Richard Levitte]
*) New function BN_mod_sqrt for computing square roots modulo a prime
2000-12-07 05:33:58 +08:00
(using the probabilistic Tonelli-Shanks algorithm unless
p == 3 (mod 4) or p == 5 (mod 8), which are cases that can
be handled deterministically).
2000-11-30 08:20:20 +08:00
[Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
*) Make BN_mod_inverse faster by explicitly handling small quotients
in the Euclid loop. (Speed gain about 20% for small moduli [256 or
512 bits], about 30% for larger ones [1024 or 2048 bits].)
[Bodo Moeller]
*) New function BN_kronecker.
[Bodo Moeller]
*) Fix BN_gcd so that it works on negative inputs; the result is
positive unless both parameters are zero.
Previously something reasonably close to an infinite loop was
possible because numbers could be growing instead of shrinking
in the implementation of Euclid's algorithm.
[Bodo Moeller]
*) Fix BN_is_word() and BN_is_one() macros to take into account the
sign of the number in question.
Fix BN_is_word(a,w) to work correctly for w == 0.
The old BN_is_word(a,w) macro is now called BN_abs_is_word(a,w)
because its test if the absolute value of 'a' equals 'w'.
Note that BN_abs_is_word does *not* handle w == 0 reliably;
it exists mostly for use in the implementations of BN_is_zero(),
BN_is_one(), and BN_is_word().
[Bodo Moeller]
*) New function BN_swap.
2000-11-27 00:42:38 +08:00
[Bodo Moeller]
*) Use BN_nnmod instead of BN_mod in crypto/bn/bn_exp.c so that
2000-11-27 00:42:38 +08:00
the exponentiation functions are more likely to produce reasonable
results on negative inputs.
[Bodo Moeller]
*) Change BN_mod_mul so that the result is always non-negative.
2000-11-27 00:42:38 +08:00
Previously, it could be negative if one of the factors was negative;
I don't think anyone really wanted that behaviour.
[Bodo Moeller]
*) Move BN_mod_... functions into new file crypto/bn/bn_mod.c
(except for exponentiation, which stays in crypto/bn/bn_exp.c,
2000-11-27 00:42:38 +08:00
and BN_mod_mul_reciprocal, which stays in crypto/bn/bn_recp.c)
and add new functions:
2000-11-27 02:31:32 +08:00
2000-11-27 00:42:38 +08:00
BN_nnmod
BN_mod_sqr
BN_mod_add
2000-11-27 02:31:32 +08:00
BN_mod_add_quick
2000-11-27 00:42:38 +08:00
BN_mod_sub
2000-11-27 02:31:32 +08:00
BN_mod_sub_quick
BN_mod_lshift1
BN_mod_lshift1_quick
BN_mod_lshift
BN_mod_lshift_quick
2000-11-27 00:42:38 +08:00
These functions always generate non-negative results.
2000-11-27 02:31:32 +08:00
2000-11-27 00:42:38 +08:00
BN_nnmod otherwise is like BN_mod (if BN_mod computes a remainder r
such that |m| < r < 0, BN_nnmod will output rem + |m| instead).
2000-11-27 02:31:32 +08:00
BN_mod_XXX_quick(r, a, [b,] m) generates the same result as
BN_mod_XXX(r, a, [b,] m, ctx), but requires that a [and b]
be reduced modulo m.
2000-11-27 00:42:38 +08:00
[Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
2003-01-25 06:28:32 +08:00
#if 0
The following entry accidentally appeared in the CHANGES file
2003-01-25 06:28:32 +08:00
distributed with OpenSSL 0.9.7. The modifications described in
it do *not* apply to OpenSSL 0.9.7.
*) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
was actually never needed) and in BN_mul(). The removal in BN_mul()
required a small change in bn_mul_part_recursive() and the addition
of the functions bn_cmp_part_words(), bn_sub_part_words() and
bn_add_part_words(), which do the same thing as bn_cmp_words(),
bn_sub_words() and bn_add_words() except they take arrays with
differing sizes.
[Richard Levitte]
2003-01-25 06:28:32 +08:00
#endif
*) In 'openssl passwd', verify passwords read from the terminal
unless the '-salt' option is used (which usually means that
verification would just waste user's time since the resulting
hash is going to be compared with some given password hash)
or the new '-noverify' option is used.
This is an incompatible change, but it does not affect
non-interactive use of 'openssl passwd' (passwords on the command
line, '-stdin' option, '-in ...' option) and thus should not
cause any problems.
[Bodo Moeller]
*) Remove all references to RSAref, since there's no more need for it.
[Richard Levitte]
*) Make DSO load along a path given through an environment variable
(SHLIB_PATH) with shl_load().
[Richard Levitte]
*) Constify the ENGINE code as a result of BIGNUM constification.
2000-11-07 07:29:52 +08:00
Also constify the RSA code and most things related to it. In a
few places, most notable in the depth of the ASN.1 code, ugly
casts back to non-const were required (to be solved at a later
time)
[Richard Levitte]
*) Make it so the openssl application has all engines loaded by default.
[Richard Levitte]
*) Constify the BIGNUM routines a little more.
[Richard Levitte]
*) Add the following functions:
ENGINE_load_cswift()
ENGINE_load_chil()
ENGINE_load_atalla()
ENGINE_load_nuron()
ENGINE_load_builtin_engines()
That way, an application can itself choose if external engines that
are built-in in OpenSSL shall ever be used or not. The benefit is
that applications won't have to be linked with libdl or other dso
libraries unless it's really needed.
Changed 'openssl engine' to load all engines on demand.
Changed the engine header files to avoid the duplication of some
declarations (they differed!).
[Richard Levitte]
*) 'openssl engine' can now list capabilities.
[Richard Levitte]
*) Better error reporting in 'openssl engine'.
[Richard Levitte]
*) Never call load_dh_param(NULL) in s_server.
[Bodo Moeller]
*) Add engine application. It can currently list engines by name and
identity, and test if they are actually available.
[Richard Levitte]
*) Improve RPM specification file by forcing symbolic linking and making
sure the installed documentation is also owned by root.root.
[Damien Miller <djm@mindrot.org>]
*) Give the OpenSSL applications more possibilities to make use of
2000-10-29 06:44:03 +08:00
keys (public as well as private) handled by engines.
[Richard Levitte]
*) Add OCSP code that comes from CertCo.
2000-10-27 19:22:17 +08:00
[Richard Levitte]
*) Add VMS support for the Rijndael code.
[Richard Levitte]
*) Added untested support for Nuron crypto accelerator.
[Ben Laurie]
*) Add support for external cryptographic devices. This code was
previously distributed separately as the "engine" branch.
[Geoff Thorpe, Richard Levitte]
*) Rework the filename-translation in the DSO code. It is now possible to
have far greater control over how a "name" is turned into a filename
depending on the operating environment and any oddities about the
different shared library filenames on each system.
[Geoff Thorpe]
*) Support threads on FreeBSD-elf in Configure.
2000-10-22 06:53:32 +08:00
[Richard Levitte]
*) Fix for SHA1 assembly problem with MASM: it produces
warnings about corrupt line number information when assembling
with debugging information. This is caused by the overlapping
of two sections.
[Bernd Matthes <mainbug@celocom.de>, Steve Henson]
*) NCONF changes.
2000-10-22 04:01:34 +08:00
NCONF_get_number() has no error checking at all. As a replacement,
NCONF_get_number_e() is defined (_e for "error checking") and is
promoted strongly. The old NCONF_get_number is kept around for
binary backward compatibility.
Make it possible for methods to load from something other than a BIO,
by providing a function pointer that is given a name instead of a BIO.
For example, this could be used to load configuration data from an
LDAP server.
[Richard Levitte]
*) Fix for non blocking accept BIOs. Added new I/O special reason
BIO_RR_ACCEPT to cover this case. Previously use of accept BIOs
with non blocking I/O was not possible because no retry code was
implemented. Also added new SSL code SSL_WANT_ACCEPT to cover
this case.
[Steve Henson]
*) Added the beginnings of Rijndael support.
[Ben Laurie]
*) Fix for bug in DirectoryString mask setting. Add support for
2000-10-06 19:51:47 +08:00
X509_NAME_print_ex() in 'req' and X509_print_ex() function
to allow certificate printing to more controllable, additional
'certopt' option to 'x509' to allow new printing options to be
set.
[Steve Henson]
*) Clean old EAY MD5 hack from e_os.h.
2000-10-02 05:46:43 +08:00
[Richard Levitte]
Changes between 0.9.6l and 0.9.6m [17 Mar 2004]
*) Fix null-pointer assignment in do_change_cipher_spec() revealed
2005-10-19 19:00:39 +08:00
by using the Codenomicon TLS Test Tool (CVE-2004-0079)
[Joe Orton, Steve Henson]
Changes between 0.9.6k and 0.9.6l [04 Nov 2003]
*) Fix additional bug revealed by the NISCC test suite:
Stop bug triggering large recursion when presented with
2005-10-19 19:00:39 +08:00
certain ASN.1 tags (CVE-2003-0851)
[Steve Henson]
Changes between 0.9.6j and 0.9.6k [30 Sep 2003]
*) Fix various bugs revealed by running the NISCC test suite:
Stop out of bounds reads in the ASN1 code when presented with
2005-10-19 19:00:39 +08:00
invalid tags (CVE-2003-0543 and CVE-2003-0544).
If verify callback ignores invalid public key errors don't try to check
certificate signature with the NULL public key.
[Steve Henson]
*) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
if the server requested one: as stated in TLS 1.0 and SSL 3.0
specifications.
[Steve Henson]
*) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
extra data after the compression methods not only for TLS 1.0
but also for SSL 3.0 (as required by the specification).
[Bodo Moeller; problem pointed out by Matthias Loepfe]
*) Change X509_certificate_type() to mark the key as exported/exportable
2003-06-20 03:04:13 +08:00
when it's 512 *bits* long, not 512 bytes.
[Richard Levitte]
Changes between 0.9.6i and 0.9.6j [10 Apr 2003]
*) Countermeasure against the Klima-Pokorny-Rosa extension of
Bleichbacher's attack on PKCS #1 v1.5 padding: treat
a protocol version number mismatch like a decryption error
in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
[Bodo Moeller]
*) Turn on RSA blinding by default in the default implementation
to avoid a timing attack. Applications that don't want it can call
RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
They would be ill-advised to do so in most cases.
[Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
*) Change RSA blinding code so that it works when the PRNG is not
seeded (in this case, the secret RSA exponent is abused as
an unpredictable seed -- if it is not unpredictable, there
is no point in blinding anyway). Make RSA blinding thread-safe
by remembering the creator's thread ID in rsa->blinding and
having all other threads use local one-time blinding factors
(this requires more computation than sharing rsa->blinding, but
avoids excessive locking; and if an RSA object is not shared
between threads, blinding will still be very fast).
[Bodo Moeller]
Changes between 0.9.6h and 0.9.6i [19 Feb 2003]
*) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
via timing by performing a MAC computation even if incorrrect
block cipher padding has been found. This is a countermeasure
against active attacks where the attacker has to distinguish
2005-10-19 19:00:39 +08:00
between bad padding and a MAC verification error. (CVE-2003-0078)
[Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
Martin Vuagnoux (EPFL, Ilion)]
Changes between 0.9.6g and 0.9.6h [5 Dec 2002]
*) New function OPENSSL_cleanse(), which is used to cleanse a section of
memory from it's contents. This is done with a counter that will
place alternating values in each byte. This can be used to solve
two issues: 1) the removal of calls to memset() by highly optimizing
compilers, and 2) cleansing with other values than 0, since those can
be read through on certain media, for example a swap space on disk.
[Geoff Thorpe]
*) Bugfix: client side session caching did not work with external caching,
because the session->cipher setting was not restored when reloading
from the external cache. This problem was masked, when
SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
(Found by Steve Haslam <steve@araqnid.ddts.net>.)
[Lutz Jaenicke]
*) Fix client_certificate (ssl/s2_clnt.c): The permissible total
length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
[Zeev Lieber <zeev-l@yahoo.com>]
*) Undo an undocumented change introduced in 0.9.6e which caused
repeated calls to OpenSSL_add_all_ciphers() and
OpenSSL_add_all_digests() to be ignored, even after calling
EVP_cleanup().
[Richard Levitte]
*) Change the default configuration reader to deal with last line not
being properly terminated.
[Richard Levitte]
*) Change X509_NAME_cmp() so it applies the special rules on handling
DN values that are of type PrintableString, as well as RDNs of type
emailAddress where the value has the type ia5String.
[stefank@valicert.com via Richard Levitte]
*) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
the bitwise-OR of the two for use by the majority of applications
wanting this behaviour, and update the docs. The documented
behaviour and actual behaviour were inconsistent and had been
changing anyway, so this is more a bug-fix than a behavioural
change.
[Geoff Thorpe, diagnosed by Nadav Har'El]
*) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
(the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
[Bodo Moeller]
2002-09-23 22:25:07 +08:00
*) Fix initialization code race conditions in
SSLv23_method(), SSLv23_client_method(), SSLv23_server_method(),
SSLv2_method(), SSLv2_client_method(), SSLv2_server_method(),
SSLv3_method(), SSLv3_client_method(), SSLv3_server_method(),
TLSv1_method(), TLSv1_client_method(), TLSv1_server_method(),
ssl2_get_cipher_by_char(),
ssl3_get_cipher_by_char().
2002-09-23 22:25:07 +08:00
[Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
2002-09-19 19:26:45 +08:00
*) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
the cached sessions are flushed, as the remove_cb() might use ex_data
contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
(see [openssl.org #212]).
[Geoff Thorpe, Lutz Jaenicke]
*) Fix typo in OBJ_txt2obj which incorrectly passed the content
length, instead of the encoding length to d2i_ASN1_OBJECT.
[Steve Henson]
2002-08-12 16:45:00 +08:00
Changes between 0.9.6f and 0.9.6g [9 Aug 2002]
2002-08-09 06:55:28 +08:00
2002-08-12 16:45:00 +08:00
*) [In 0.9.6g-engine release:]
Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
[Lynn Gazis <lgazis@rainbow.com>]
2002-08-09 06:55:28 +08:00
Changes between 0.9.6e and 0.9.6f [8 Aug 2002]
2002-08-02 19:48:15 +08:00
*) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
and get fix the header length calculation.
[Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
Alon Kantor <alonk@checkpoint.com> (and others),
Steve Henson]
2002-08-02 19:48:15 +08:00
*) Use proper error handling instead of 'assertions' in buffer
overflow checks added in 0.9.6e. This prevents DoS (the
assertions could call abort()).
[Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
Changes between 0.9.6d and 0.9.6e [30 Jul 2002]
*) Add various sanity checks to asn1_get_length() to reject
the ASN1 length bytes if they exceed sizeof(long), will appear
negative or the content length exceeds the length of the
supplied buffer.
[Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
*) Fix cipher selection routines: ciphers without encryption had no flags
for the cipher strength set and where therefore not handled correctly
by the selection routines (PR #130).
[Lutz Jaenicke]
*) Fix EVP_dsa_sha macro.
[Nils Larsch]
*) New option
SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
for disabling the SSL 3.0/TLS 1.0 CBC vulnerability countermeasure
that was added in OpenSSL 0.9.6d.
As the countermeasure turned out to be incompatible with some
broken SSL implementations, the new option is part of SSL_OP_ALL.
SSL_OP_ALL is usually employed when compatibility with weird SSL
implementations is desired (e.g. '-bugs' option to 's_client' and
's_server'), so the new option is automatically set in many
applications.
[Bodo Moeller]
*) Changes in security patch:
Changes marked "(CHATS)" were sponsored by the Defense Advanced
Research Projects Agency (DARPA) and Air Force Research Laboratory,
Air Force Materiel Command, USAF, under agreement number
F30602-01-2-0537.
*) Add various sanity checks to asn1_get_length() to reject
the ASN1 length bytes if they exceed sizeof(long), will appear
negative or the content length exceeds the length of the
2005-10-19 19:00:39 +08:00
supplied buffer. (CVE-2002-0659)
[Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
*) Assertions for various potential buffer overflows, not known to
happen in practice.
[Ben Laurie (CHATS)]
*) Various temporary buffers to hold ASCII versions of integers were
2005-10-19 19:00:39 +08:00
too small for 64 bit platforms. (CVE-2002-0655)
[Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
*) Remote buffer overflow in SSL3 protocol - an attacker could
2005-10-19 19:00:39 +08:00
supply an oversized session ID to a client. (CVE-2002-0656)
[Ben Laurie (CHATS)]
*) Remote buffer overflow in SSL2 protocol - an attacker could
2005-10-19 19:00:39 +08:00
supply an oversized client master key. (CVE-2002-0656)
[Ben Laurie (CHATS)]
Changes between 0.9.6c and 0.9.6d [9 May 2002]
2002-04-11 03:52:40 +08:00
*) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
encoded as NULL) with id-dsa-with-sha1.
[Nils Larsch <nla@trustcenter.de>; problem pointed out by Bodo Moeller]
*) Check various X509_...() return values in apps/req.c.
[Nils Larsch <nla@trustcenter.de>]
2002-04-15 17:55:40 +08:00
*) Fix BASE64 decode (EVP_DecodeUpdate) for data with CR/LF ended lines:
an end-of-file condition would erroneously be flagged, when the CRLF
2002-04-15 17:55:40 +08:00
was just at the end of a processed block. The bug was discovered when
processing data through a buffering memory BIO handing the data to a
BASE64-decoding BIO. Bug fund and patch submitted by Pavel Tsekov
<ptsekov@syntrex.com> and Nedelcho Stanev.
[Lutz Jaenicke]
*) Implement a countermeasure against a vulnerability recently found
in CBC ciphersuites in SSL 3.0/TLS 1.0: Send an empty fragment
before application data chunks to avoid the use of known IVs
with data potentially chosen by the attacker.
[Bodo Moeller]
*) Fix length checks in ssl3_get_client_hello().
[Bodo Moeller]
*) TLS/SSL library bugfix: use s->s3->in_read_app_data differently
to prevent ssl3_read_internal() from incorrectly assuming that
ssl3_read_bytes() found application data while handshake
processing was enabled when in fact s->s3->in_read_app_data was
merely automatically cleared during the initial handshake.
[Bodo Moeller; problem pointed out by Arne Ansper <arne@ats.cyber.ee>]
2002-04-11 03:52:40 +08:00
*) Fix object definitions for Private and Enterprise: they were not
recognized in their shortname (=lowercase) representation. Extend
obj_dat.pl to issue an error when using undefined keywords instead
of silently ignoring the problem (Svenning Sorensen
<sss@sss.dnsalias.net>).
[Lutz Jaenicke]
*) Fix DH_generate_parameters() so that it works for 'non-standard'
generators, i.e. generators other than 2 and 5. (Previously, the
code did not properly initialise the 'add' and 'rem' values to
BN_generate_prime().)
In the new general case, we do not insist that 'generator' is
actually a primitive root: This requirement is rather pointless;
a generator of the order-q subgroup is just as good, if not
better.
[Bodo Moeller]
*) Map new X509 verification errors to alerts. Discovered and submitted by
Tom Wu <tom@arcot.com>.
[Lutz Jaenicke]
*) Fix ssl3_pending() (ssl/s3_lib.c) to prevent SSL_pending() from
returning non-zero before the data has been completely received
when using non-blocking I/O.
[Bodo Moeller; problem pointed out by John Hughes]
*) Some of the ciphers missed the strength entry (SSL_LOW etc).
[Ben Laurie, Lutz Jaenicke]
*) Fix bug in SSL_clear(): bad sessions were not removed (found by
Yoram Zahavi <YoramZ@gilian.com>).
[Lutz Jaenicke]
*) Add information about CygWin 1.3 and on, and preserve proper
configuration for the versions before that.
[Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
*) Make removal from session cache (SSL_CTX_remove_session()) more robust:
check whether we deal with a copy of a session and do not delete from
the cache in this case. Problem reported by "Izhar Shoshani Levi"
<izhar@checkpoint.com>.
[Lutz Jaenicke]
*) Do not store session data into the internal session cache, if it
is never intended to be looked up (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
flag is set). Proposed by Aslam <aslam@funk.com>.
[Lutz Jaenicke]
*) Have ASN1_BIT_STRING_set_bit() really clear a bit when the requested
value is 0.
[Richard Levitte]
*) [In 0.9.6d-engine release:]
Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
[Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
*) Add the configuration target linux-s390x.
[Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
2002-04-11 03:52:40 +08:00
*) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
variable as an indication that a ClientHello message has been
received. As the flag value will be lost between multiple
invocations of ssl3_accept when using non-blocking I/O, the
function may not be aware that a handshake has actually taken
place, thus preventing a new session from being added to the
session cache.
To avoid this problem, we now set s->new_session to 2 instead of
using a local variable.
[Lutz Jaenicke, Bodo Moeller]
*) Bugfix: Return -1 from ssl3_get_server_done (ssl3/s3_clnt.c)
if the SSL_R_LENGTH_MISMATCH error is detected.
[Geoff Thorpe, Bodo Moeller]
*) New 'shared_ldflag' column in Configure platform table.
[Richard Levitte]
*) Fix EVP_CIPHER_mode macro.
["Dan S. Camper" <dan@bti.net>]
*) Fix ssl3_read_bytes (ssl/s3_pkt.c): To ignore messages of unknown
type, we must throw them away by setting rr->length to 0.
[D P Chang <dpc@qualys.com>]
Changes between 0.9.6b and 0.9.6c [21 dec 2001]
*) Fix BN_rand_range bug pointed out by Dominikus Scherkl
<Dominikus.Scherkl@biodata.com>. (The previous implementation
worked incorrectly for those cases where range = 10..._2 and
3*range is two bits longer than range.)
[Bodo Moeller]
*) Only add signing time to PKCS7 structures if it is not already
present.
[Steve Henson]
*) Fix crypto/objects/objects.h: "ld-ce" should be "id-ce",
OBJ_ld_ce should be OBJ_id_ce.
Also some ip-pda OIDs in crypto/objects/objects.txt were
incorrect (cf. RFC 3039).
[Matt Cooper, Frederic Giudicelli, Bodo Moeller]
*) Release CRYPTO_LOCK_DYNLOCK when CRYPTO_destroy_dynlockid()
returns early because it has nothing to do.
[Andy Schneider <andy.schneider@bjss.co.uk>]
*) [In 0.9.6c-engine release:]
Fix mutex callback return values in crypto/engine/hw_ncipher.c.
[Andy Schneider <andy.schneider@bjss.co.uk>]
*) [In 0.9.6c-engine release:]
Add support for Cryptographic Appliance's keyserver technology.
(Use engine 'keyclient')
[Cryptographic Appliances and Geoff Thorpe]
*) Add a configuration entry for OS/390 Unix. The C compiler 'c89'
is called via tools/c89.sh because arguments have to be
rearranged (all '-L' options must appear before the first object
modules).
[Richard Shapiro <rshapiro@abinitio.com>]
*) [In 0.9.6c-engine release:]
Add support for Broadcom crypto accelerator cards, backported
from 0.9.7.
[Broadcom, Nalin Dahyabhai <nalin@redhat.com>, Mark Cox]
*) [In 0.9.6c-engine release:]
Add support for SureWare crypto accelerator cards from
Baltimore Technologies. (Use engine 'sureware')
[Baltimore Technologies and Mark Cox]
*) [In 0.9.6c-engine release:]
Add support for crypto accelerator cards from Accelerated
Encryption Processing, www.aep.ie. (Use engine 'aep')
[AEP Inc. and Mark Cox]
*) Add a configuration entry for gcc on UnixWare.
[Gary Benson <gbenson@redhat.com>]
*) Change ssl/s2_clnt.c and ssl/s2_srvr.c so that received handshake
messages are stored in a single piece (fixed-length part and
variable-length part combined) and fix various bugs found on the way.
[Bodo Moeller]
*) Disable caching in BIO_gethostbyname(), directly use gethostbyname()
instead. BIO_gethostbyname() does not know what timeouts are
appropriate, so entries would stay in cache even when they have
become invalid.
[Bodo Moeller; problem pointed out by Rich Salz <rsalz@zolera.com>
*) Change ssl23_get_client_hello (ssl/s23_srvr.c) behaviour when
faced with a pathologically small ClientHello fragment that does
not contain client_version: Instead of aborting with an error,
simply choose the highest available protocol version (i.e.,
TLS 1.0 unless it is disabled). In practice, ClientHello
messages are never sent like this, but this change gives us
strictly correct behaviour at least for TLS.
[Bodo Moeller]
*) Fix SSL handshake functions and SSL_clear() such that SSL_clear()
never resets s->method to s->ctx->method when called from within
one of the SSL handshake functions.
[Bodo Moeller; problem pointed out by Niko Baric]
*) In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert
(sent using the client's version number) if client_version is
smaller than the protocol version in use. Also change
ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if
the client demanded SSL 3.0 but only TLS 1.0 is enabled; then
the client will at least see that alert.
[Bodo Moeller]
*) Fix ssl3_get_message (ssl/s3_both.c) to handle message fragmentation
correctly.
[Bodo Moeller]
*) Avoid infinite loop in ssl3_get_message (ssl/s3_both.c) if a
client receives HelloRequest while in a handshake.
[Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
*) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
should end in 'break', not 'goto end' which circumvents various
2002-04-11 03:52:40 +08:00
cleanups done in state SSL_ST_OK. But session related stuff
must be disabled for SSL_ST_OK in the case that we just sent a
HelloRequest.
Also avoid some overhead by not calling ssl_init_wbio_buffer()
before just sending a HelloRequest.
[Bodo Moeller, Eric Rescorla <ekr@rtfm.com>]
*) Fix ssl/s3_enc.c, ssl/t1_enc.c and ssl/s3_pkt.c so that we don't
reveal whether illegal block cipher padding was found or a MAC
verification error occurred. (Neither SSLerr() codes nor alerts
2002-04-11 03:52:40 +08:00
are directly visible to potential attackers, but the information
may leak via logfiles.)
Similar changes are not required for the SSL 2.0 implementation
because the number of padding bytes is sent in clear for SSL 2.0,
and the extra bytes are just ignored. However ssl/s2_pkt.c
failed to verify that the purported number of padding bytes is in
the legal range.
[Bodo Moeller]
*) Add OpenUNIX-8 support including shared libraries
(Boyd Lynn Gerber <gerberb@zenez.com>).
[Lutz Jaenicke]
*) Improve RSA_padding_check_PKCS1_OAEP() check again to avoid
'wristwatch attack' using huge encoding parameters (cf.
James H. Manger's CRYPTO 2001 paper). Note that the
RSA_PKCS1_OAEP_PADDING case of RSA_private_decrypt() does not use
encoding parameters and hence was not vulnerable.
[Bodo Moeller]
*) BN_sqr() bug fix.
[Ulf Möller, reported by Jim Ellis <jim.ellis@cavium.com>]
2002-04-11 03:52:40 +08:00
*) Rabin-Miller test analyses assume uniformly distributed witnesses,
so use BN_pseudo_rand_range() instead of using BN_pseudo_rand()
followed by modular reduction.
[Bodo Moeller; pointed out by Adam Young <AYoung1@NCSUS.JNJ.COM>]
*) Add BN_pseudo_rand_range() with obvious functionality: BN_rand_range()
equivalent based on BN_pseudo_rand() instead of BN_rand().
[Bodo Moeller]
*) s3_srvr.c: allow sending of large client certificate lists (> 16 kB).
This function was broken, as the check for a new client hello message
to handle SGC did not allow these large messages.
(Tracked down by "Douglas E. Engert" <deengert@anl.gov>.)
[Lutz Jaenicke]
*) Add alert descriptions for TLSv1 to SSL_alert_desc_string[_long]().
[Lutz Jaenicke]
*) Fix buggy behaviour of BIO_get_num_renegotiates() and BIO_ctrl()
for BIO_C_GET_WRITE_BUF_SIZE ("Stephen Hinton" <shinton@netopia.com>).
[Lutz Jaenicke]
*) Rework the configuration and shared library support for Tru64 Unix.
The configuration part makes use of modern compiler features and
still retains old compiler behavior for those that run older versions
of the OS. The shared library support part includes a variant that
uses the RPATH feature, and is available through the special
configuration target "alpha-cc-rpath", which will never be selected
automatically.
[Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> via Richard Levitte]
*) In ssl3_get_key_exchange (ssl/s3_clnt.c), call ssl3_get_message()
with the same message size as in ssl3_get_certificate_request().
Otherwise, if no ServerKeyExchange message occurs, CertificateRequest
messages might inadvertently be reject as too long.
[Petr Lampa <lampa@fee.vutbr.cz>]
*) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
[Andy Polyakov]
*) Modified SSL library such that the verify_callback that has been set
specificly for an SSL object with SSL_set_verify() is actually being
used. Before the change, a verify_callback set with this function was
ignored and the verify_callback() set in the SSL_CTX at the time of
the call was used. New function X509_STORE_CTX_set_verify_cb() introduced
to allow the necessary settings.
[Lutz Jaenicke]
*) Initialize static variable in crypto/dsa/dsa_lib.c and crypto/dh/dh_lib.c
explicitly to NULL, as at least on Solaris 8 this seems not always to be
done automatically (in contradiction to the requirements of the C
standard). This made problems when used from OpenSSH.
[Lutz Jaenicke]
*) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
dh->length and always used
BN_rand_range(priv_key, dh->p).
BN_rand_range() is not necessary for Diffie-Hellman, and this
specific range makes Diffie-Hellman unnecessarily inefficient if
dh->length (recommended exponent length) is much smaller than the
length of dh->p. We could use BN_rand_range() if the order of
the subgroup was stored in the DH structure, but we only have
dh->length.
So switch back to
BN_rand(priv_key, l, ...)
where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
otherwise.
[Bodo Moeller]
*) In
RSA_eay_public_encrypt
RSA_eay_private_decrypt
RSA_eay_private_encrypt (signing)
RSA_eay_public_decrypt (signature verification)
(default implementations for RSA_public_encrypt,
RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
always reject numbers >= n.
[Bodo Moeller]
*) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
to synchronize access to 'locking_thread'. This is necessary on
systems where access to 'locking_thread' (an 'unsigned long'
variable) is not atomic.
[Bodo Moeller]
*) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
*before* setting the 'crypto_lock_rand' flag. The previous code had
a race condition if 0 is a valid thread ID.
[Travis Vitek <vitek@roguewave.com>]
*) Add support for shared libraries under Irix.
[Albert Chin-A-Young <china@thewrittenword.com>]
*) Add configuration option to build on Linux on both big-endian and
little-endian MIPS.
[Ralf Baechle <ralf@uni-koblenz.de>]
*) Add the possibility to create shared libraries on HP-UX.
[Richard Levitte]
Changes between 0.9.6a and 0.9.6b [9 Jul 2001]
*) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
PRNG state recovery was possible based on the output of
one PRNG request appropriately sized to gain knowledge on
'md' followed by enough consecutive 1-byte PRNG requests
to traverse all of 'state'.
1. When updating 'md_local' (the current thread's copy of 'md')
during PRNG output generation, hash all of the previous
'md_local' value, not just the half used for PRNG output.
2. Make the number of bytes from 'state' included into the hash
independent from the number of PRNG bytes requested.
The first measure alone would be sufficient to avoid
Markku-Juhani's attack. (Actually it had never occurred
to me that the half of 'md_local' used for chaining was the
half from which PRNG output bytes were taken -- I had always
assumed that the secret half would be used.) The second
measure makes sure that additional data from 'state' is never
mixed into 'md_local' in small portions; this heuristically
further strengthens the PRNG.
[Bodo Moeller]
*) Fix crypto/bn/asm/mips3.s.
[Andy Polyakov]
*) When only the key is given to "enc", the IV is undefined. Print out
an error message in this case.
[Lutz Jaenicke]
*) Handle special case when X509_NAME is empty in X509 printing routines.
[Steve Henson]
*) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
positive and less than q.
[Bodo Moeller]
*) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
used: it isn't thread safe and the add_lock_callback should handle
that itself.
[Paul Rose <Paul.Rose@bridge.com>]
*) Verify that incoming data obeys the block size in
ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
[Bodo Moeller]
*) Fix OAEP check.
[Ulf Möller, Bodo Möller]
2002-04-11 03:52:40 +08:00
*) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5
when fixing the server behaviour for backwards-compatible 'client
hello' messages. (Note that the attack is impractical against
SSL 3.0 and TLS 1.0 anyway because length and version checking
means that the probability of guessing a valid ciphertext is
around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
paper.)
Before 0.9.5, the countermeasure (hide the error by generating a
random 'decryption result') did not work properly because
ERR_clear_error() was missing, meaning that SSL_get_error() would
detect the supposedly ignored error.
Both problems are now fixed.
[Bodo Moeller]
*) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
(previously it was 1024).
[Bodo Moeller]
*) Fix for compatibility mode trust settings: ignore trust settings
unless some valid trust or reject settings are present.
[Steve Henson]
*) Fix for blowfish EVP: its a variable length cipher.
[Steve Henson]
*) Fix various bugs related to DSA S/MIME verification. Handle missing
parameters in DSA public key structures and return an error in the
DSA routines if parameters are absent.
[Steve Henson]
*) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
in the current directory if neither $RANDFILE nor $HOME was set.
RAND_file_name() in 0.9.6a returned NULL in this case. This has
caused some confusion to Windows users who haven't defined $HOME.
Thus RAND_file_name() is changed again: e_os.h can define a
DEFAULT_HOME, which will be used if $HOME is not set.
For Windows, we use "C:"; on other platforms, we still require
environment variables.
*) Move 'if (!initialized) RAND_poll()' into regions protected by
CRYPTO_LOCK_RAND. This is not strictly necessary, but avoids
having multiple threads call RAND_poll() concurrently.
[Bodo Moeller]
*) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
combination of a flag and a thread ID variable.
Otherwise while one thread is in ssleay_rand_bytes (which sets the
flag), *other* threads can enter ssleay_add_bytes without obeying
the CRYPTO_LOCK_RAND lock (and may even illegally release the lock
that they do not hold after the first thread unsets add_do_not_lock).
[Bodo Moeller]
*) Change bctest again: '-x' expressions are not available in all
versions of 'test'.
[Bodo Moeller]
Changes between 0.9.6 and 0.9.6a [5 Apr 2001]
*) Fix a couple of memory leaks in PKCS7_dataDecode()
[Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
*) Change Configure and Makefiles to provide EXE_EXT, which will contain
the default extension for executables, if any. Also, make the perl
scripts that use symlink() to test if it really exists and use "cp"
if it doesn't. All this made OpenSSL compilable and installable in
CygWin.
[Richard Levitte]
*) Fix for asn1_GetSequence() for indefinite length constructed data.
If SEQUENCE is length is indefinite just set c->slen to the total
amount of data available.
[Steve Henson, reported by shige@FreeBSD.org]
[This change does not apply to 0.9.7.]
*) Change bctest to avoid here-documents inside command substitution
(workaround for FreeBSD /bin/sh bug).
For compatibility with Ultrix, avoid shell functions (introduced
in the bctest version that searches along $PATH).
[Bodo Moeller]
*) Rename 'des_encrypt' to 'des_encrypt1'. This avoids the clashes
with des_encrypt() defined on some operating systems, like Solaris
and UnixWare.
[Richard Levitte]
*) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
On the Importance of Eliminating Errors in Cryptographic
Computations, J. Cryptology 14 (2001) 2, 101-119,
http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
[Ulf Moeller]
*) MIPS assembler BIGNUM division bug fix.
[Andy Polyakov]
*) Disabled incorrect Alpha assembler code.
[Richard Levitte]
*) Fix PKCS#7 decode routines so they correctly update the length
after reading an EOC for the EXPLICIT tag.
[Steve Henson]
[This change does not apply to 0.9.7.]
*) Fix bug in PKCS#12 key generation routines. This was triggered
if a 3DES key was generated with a 0 initial byte. Include
PKCS12_BROKEN_KEYGEN compilation option to retain the old
(but broken) behaviour.
[Steve Henson]
*) Enhance bctest to search for a working bc along $PATH and print
it when found.
[Tim Rice <tim@multitalents.net> via Richard Levitte]
*) Fix memory leaks in err.c: free err_data string if necessary;
don't write to the wrong index in ERR_set_error_data.
[Bodo Moeller]
*) Implement ssl23_peek (analogous to ssl23_read), which previously
did not exist.
[Bodo Moeller]
*) Replace rdtsc with _emit statements for VC++ version 5.
[Jeremy Cooper <jeremy@baymoo.org>]
*) Make it possible to reuse SSLv2 sessions.
[Richard Levitte]
*) In copy_email() check for >= 0 as a return value for
X509_NAME_get_index_by_NID() since 0 is a valid index.
[Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
*) Avoid coredump with unsupported or invalid public keys by checking if
X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
PKCS7_verify() fails with non detached data.
[Steve Henson]
*) Don't use getenv in library functions when run as setuid/setgid.
New function OPENSSL_issetugid().
[Ulf Moeller]
*) Avoid false positives in memory leak detection code (crypto/mem_dbg.c)
due to incorrect handling of multi-threading:
1. Fix timing glitch in the MemCheck_off() portion of CRYPTO_mem_ctrl().
2. Fix logical glitch in is_MemCheck_on() aka CRYPTO_is_mem_check_on().
3. Count how many times MemCheck_off() has been called so that
nested use can be treated correctly. This also avoids
inband-signalling in the previous code (which relied on the
assumption that thread ID 0 is impossible).
[Bodo Moeller]
*) Add "-rand" option also to s_client and s_server.
[Lutz Jaenicke]
*) Fix CPU detection on Irix 6.x.
[Kurt Hockenbury <khockenb@stevens-tech.edu> and
"Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
*) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
was empty.
[Steve Henson]
[This change does not apply to 0.9.7.]
*) Use the cached encoding of an X509_NAME structure rather than
copying it. This is apparently the reason for the libsafe "errors"
but the code is actually correct.
[Steve Henson]
*) Add new function BN_rand_range(), and fix DSA_sign_setup() to prevent
Bleichenbacher's DSA attack.
Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
to be set and top=0 forces the highest bit to be set; top=-1 is new
and leaves the highest bit random.
[Ulf Moeller, Bodo Moeller]
*) In the NCONF_...-based implementations for CONF_... queries
(crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
a temporary CONF structure with the data component set to NULL
(which gives segmentation faults in lh_retrieve).
Instead, use NULL for the CONF pointer in CONF_get_string and
CONF_get_number (which may use environment variables) and directly
return NULL from CONF_get_section.
[Bodo Moeller]
*) Fix potential buffer overrun for EBCDIC.
[Ulf Moeller]
*) Tolerate nonRepudiation as being valid for S/MIME signing and certSign
keyUsage if basicConstraints absent for a CA.
[Steve Henson]
*) Make SMIME_write_PKCS7() write mail header values with a format that
is more generally accepted (no spaces before the semicolon), since
some programs can't parse those values properly otherwise. Also make
sure BIO's that break lines after each write do not create invalid
headers.
[Richard Levitte]
*) Make the CRL encoding routines work with empty SEQUENCE OF. The
macros previously used would not encode an empty SEQUENCE OF
and break the signature.
[Steve Henson]
[This change does not apply to 0.9.7.]
*) Zero the premaster secret after deriving the master secret in
DH ciphersuites.
[Steve Henson]
*) Add some EVP_add_digest_alias registrations (as found in
OpenSSL_add_all_digests()) to SSL_library_init()
aka OpenSSL_add_ssl_algorithms(). This provides improved
compatibility with peers using X.509 certificates
with unconventional AlgorithmIdentifier OIDs.
[Bodo Moeller]
*) Fix for Irix with NO_ASM.
["Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
*) ./config script fixes.
[Ulf Moeller, Richard Levitte]
*) Fix 'openssl passwd -1'.
[Bodo Moeller]
*) Change PKCS12_key_gen_asc() so it can cope with non null
terminated strings whose length is passed in the passlen
parameter, for example from PEM callbacks. This was done
by adding an extra length parameter to asc2uni().
[Steve Henson, reported by <oddissey@samsung.co.kr>]
*) Fix C code generated by 'openssl dsaparam -C': If a BN_bin2bn
call failed, free the DSA structure.
[Bodo Moeller]
*) Fix to uni2asc() to cope with zero length Unicode strings.
These are present in some PKCS#12 files.
[Steve Henson]
*) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
when writing a 32767 byte record.
[Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
*) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
(RSA objects have a reference count access to which is protected
by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
so they are meant to be shared between threads.)
[Bodo Moeller, Geoff Thorpe; original patch submitted by
"Reddie, Steven" <Steven.Reddie@ca.com>]
*) Fix a deadlock in CRYPTO_mem_leaks().
[Bodo Moeller]
*) Use better test patterns in bntest.
[Ulf Möller]
2002-04-11 03:52:40 +08:00
*) rand_win.c fix for Borland C.
[Ulf Möller]
2002-04-11 03:52:40 +08:00
*) BN_rshift bugfix for n == 0.
[Bodo Moeller]
*) Add a 'bctest' script that checks for some known 'bc' bugs
so that 'make test' does not abort just because 'bc' is broken.
[Bodo Moeller]
*) Store verify_result within SSL_SESSION also for client side to
avoid potential security hole. (Re-used sessions on the client side
always resulted in verify_result==X509_V_OK, not using the original
result of the server certificate verification.)
[Lutz Jaenicke]
*) Fix ssl3_pending: If the record in s->s3->rrec is not of type
SSL3_RT_APPLICATION_DATA, return 0.
Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
[Bodo Moeller]
*) Fix SSL_peek:
Both ssl2_peek and ssl3_peek, which were totally broken in earlier
releases, have been re-implemented by renaming the previous
implementations of ssl2_read and ssl3_read to ssl2_read_internal
and ssl3_read_internal, respectively, and adding 'peek' parameters
to them. The new ssl[23]_{read,peek} functions are calls to
ssl[23]_read_internal with the 'peek' flag set appropriately.
A 'peek' parameter has also been added to ssl3_read_bytes, which
does the actual work for ssl3_read_internal.
[Bodo Moeller]
*) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
the method-specific "init()" handler. Also clean up ex_data after
calling the method-specific "finish()" handler. Previously, this was
happening the other way round.
[Geoff Thorpe]
*) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
The previous value, 12, was not always sufficient for BN_mod_exp().
[Bodo Moeller]
*) Make sure that shared libraries get the internal name engine with
the full version number and not just 0. This should mark the
shared libraries as not backward compatible. Of course, this should
be changed again when we can guarantee backward binary compatibility.
[Richard Levitte]
*) Fix typo in get_cert_by_subject() in by_dir.c
[Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
*) Rework the system to generate shared libraries:
- Make note of the expected extension for the shared libraries and
if there is a need for symbolic links from for example libcrypto.so.0
to libcrypto.so.0.9.7. There is extended info in Configure for
that.
- Make as few rebuilds of the shared libraries as possible.
- Still avoid linking the OpenSSL programs with the shared libraries.
- When installing, install the shared libraries separately from the
static ones.
[Richard Levitte]
2000-09-26 19:39:37 +08:00
*) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
and not in SSL_clear because the latter is also used by the
accept/connect functions; previously, the settings made by
SSL_set_read_ahead would be lost during the handshake.
[Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]
2000-09-25 19:12:27 +08:00
*) Correct util/mkdef.pl to be selective about disabled algorithms.
Previously, it would create entries for disabled algorithms no
2000-09-25 19:12:27 +08:00
matter what.
[Richard Levitte]
*) Added several new manual pages for SSL_* function.
[Lutz Jaenicke]
Changes between 0.9.5a and 0.9.6 [24 Sep 2000]
2000-09-23 05:39:33 +08:00
*) In ssl23_get_client_hello, generate an error message when faced
with an initial SSL 3.0/TLS record that is too small to contain the
first two bytes of the ClientHello message, i.e. client_version.
(Note that this is a pathologic case that probably has never happened
in real life.) The previous approach was to use the version number
2000-09-23 05:45:49 +08:00
from the record header as a substitute; but our protocol choice
2000-09-23 05:39:33 +08:00
should not depend on that one because it is not authenticated
by the Finished messages.
[Bodo Moeller]
2000-09-23 13:17:40 +08:00
*) More robust randomness gathering functions for Windows.
[Jeffrey Altman <jaltman@columbia.edu>]
*) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is
not set then we don't setup the error code for issuer check errors
to avoid possibly overwriting other errors which the callback does
handle. If an application does set the flag then we assume it knows
what it is doing and can handle the new informational codes
appropriately.
[Steve Henson]
2000-09-22 02:57:00 +08:00
*) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for
a general "ANY" type, as such it should be able to decode anything
including tagged types. However it didn't check the class so it would
wrongly interpret tagged types in the same way as their universal
counterpart and unknown types were just rejected. Changed so that the
tagged and unknown types are handled in the same way as a SEQUENCE:
that is the encoding is stored intact. There is also a new type
"V_ASN1_OTHER" which is used when the class is not universal, in this
case we have no idea what the actual type is so we just lump them all
together.
[Steve Henson]
*) On VMS, stdout may very well lead to a file that is written to
in a record-oriented fashion. That means that every write() will
write a separate record, which will be read separately by the
programs trying to read from it. This can be very confusing.
The solution is to put a BIO filter in the way that will buffer
text until a linefeed is reached, and then write everything a
line at a time, so every record written will be an actual line,
not chunks of lines and not (usually doesn't happen, but I've
seen it once) several lines in one record. BIO_f_linebuffer() is
the answer.
Currently, it's a VMS-only method, because that's where it has
been tested well enough.
[Richard Levitte]
*) Remove 'optimized' squaring variant in BN_mod_mul_montgomery,
it can return incorrect results.
2000-09-20 07:06:14 +08:00
(Note: The buggy variant was not enabled in OpenSSL 0.9.5a,
but it was in 0.9.6-beta[12].)
[Bodo Moeller]
*) Disable the check for content being present when verifying detached
signatures in pk7_smime.c. Some versions of Netscape (wrongly)
include zero length content when signing messages.
[Steve Henson]
*) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR
BIO_ctrl (for BIO pairs).
[Bodo Möller]
*) Add DSO method for VMS.
[Richard Levitte]
*) Bug fix: Montgomery multiplication could produce results with the
wrong sign.
[Ulf Möller]
*) Add RPM specification openssl.spec and modify it to build three
packages. The default package contains applications, application
documentation and run-time libraries. The devel package contains
include files, static libraries and function documentation. The
doc package contains the contents of the doc directory. The original
openssl.spec was provided by Damien Miller <djm@mindrot.org>.
[Richard Levitte]
*) Add a large number of documentation files for many SSL routines.
[Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
*) Add a configuration entry for Sony News 4.
[NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>]
2000-09-13 09:48:05 +08:00
*) Don't set the two most significant bits to one when generating a
random number < q in the DSA library.
[Ulf Möller]
2000-09-13 09:48:05 +08:00
*) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default
behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if
the underlying transport is blocking) if a handshake took place.
(The default behaviour is needed by applications such as s_client
and s_server that use select() to determine when to use SSL_read;
but for applications that know in advance when to expect data, it
just makes things more complicated.)
[Bodo Moeller]
2000-09-12 01:58:09 +08:00
*) Add RAND_egd_bytes(), which gives control over the number of bytes read
from EGD.
[Ben Laurie]
*) Add a few more EBCDIC conditionals that make `req' and `x509'
work better on such systems.
[Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
*) Add two demo programs for PKCS12_parse() and PKCS12_create().
Update PKCS12_parse() so it copies the friendlyName and the
keyid to the certificates aux info.
[Steve Henson]
*) Fix bug in PKCS7_verify() which caused an infinite loop
if there was more than one signature.
[Sven Uszpelkat <su@celocom.de>]
*) Major change in util/mkdef.pl to include extra information
about each symbol, as well as presenting variables as well
as functions. This change means that there's n more need
to rebuild the .num files when some algorithms are excluded.
[Richard Levitte]
*) Allow the verify time to be set by an application,
rather than always using the current time.
[Steve Henson]
*) Phase 2 verify code reorganisation. The certificate
verify code now looks up an issuer certificate by a
number of criteria: subject name, authority key id
and key usage. It also verifies self signed certificates
by the same criteria. The main comparison function is
X509_check_issued() which performs these checks.
Lot of changes were necessary in order to support this
without completely rewriting the lookup code.
Authority and subject key identifier are now cached.
The LHASH 'certs' is X509_STORE has now been replaced
by a STACK_OF(X509_OBJECT). This is mainly because an
LHASH can't store or retrieve multiple objects with
the same hash value.
As a result various functions (which were all internal
use only) have changed to handle the new X509_STORE
structure. This will break anything that messed round
with X509_STORE internally.
The functions X509_STORE_add_cert() now checks for an
exact match, rather than just subject name.
The X509_STORE API doesn't directly support the retrieval
of multiple certificates matching a given criteria, however
this can be worked round by performing a lookup first
(which will fill the cache with candidate certificates)
and then examining the cache for matches. This is probably
the best we can do without throwing out X509_LOOKUP
entirely (maybe later...).
The X509_VERIFY_CTX structure has been enhanced considerably.
All certificate lookup operations now go via a get_issuer()
callback. Although this currently uses an X509_STORE it
can be replaced by custom lookups. This is a simple way
to bypass the X509_STORE hackery necessary to make this
work and makes it possible to use more efficient techniques
in future. A very simple version which uses a simple
STACK for its trusted certificate store is also provided
using X509_STORE_CTX_trusted_stack().
The verify_cb() and verify() callbacks now have equivalents
in the X509_STORE_CTX structure.
X509_STORE_CTX also has a 'flags' field which can be used
to customise the verify behaviour.
[Steve Henson]
*) Add new PKCS#7 signing option PKCS7_NOSMIMECAP which
excludes S/MIME capabilities.
[Steve Henson]
*) When a certificate request is read in keep a copy of the
original encoding of the signed data and use it when outputting
again. Signatures then use the original encoding rather than
a decoded, encoded version which may cause problems if the
request is improperly encoded.
[Steve Henson]
2000-09-04 23:47:17 +08:00
*) For consistency with other BIO_puts implementations, call
buffer_write(b, ...) directly in buffer_puts instead of calling
BIO_write(b, ...).
2000-09-05 20:46:10 +08:00
In BIO_puts, increment b->num_write as in BIO_write.
2000-09-04 23:47:17 +08:00
[Peter.Sylvester@EdelWeb.fr]
*) Fix BN_mul_word for the case where the word is 0. (We have to use
BN_zero, we may not return a BIGNUM with an array consisting of
words set to zero.)
[Bodo Moeller]
*) Avoid calling abort() from within the library when problems are
detected, except if preprocessor symbols have been defined
(such as REF_CHECK, BN_DEBUG etc.).
[Bodo Moeller]
*) New openssl application 'rsautl'. This utility can be
used for low level RSA operations. DER public key
BIO/fp routines also added.
[Steve Henson]
2000-09-01 17:54:25 +08:00
*) New Configure entry and patches for compiling on QNX 4.
[Andreas Schneider <andreas@ds3.etech.fh-hamburg.de>]
2000-08-31 02:14:28 +08:00
*) A demo state-machine implementation was sponsored by
Nuron (http://www.nuron.com/) and is now available in
demos/state_machine.
[Ben Laurie]
*) New options added to the 'dgst' utility for signature
generation and verification.
[Steve Henson]
*) Unrecognized PKCS#7 content types are now handled via a
catch all ASN1_TYPE structure. This allows unsupported
types to be stored as a "blob" and an application can
encode and decode it manually.
[Steve Henson]
*) Fix various signed/unsigned issues to make a_strex.c
compile under VC++.
[Oscar Jacobsson <oscar.jacobsson@celocom.com>]
*) ASN1 fixes. i2d_ASN1_OBJECT was not returning the correct
length if passed a buffer. ASN1_INTEGER_to_BN failed
if passed a NULL BN and its argument was negative.
[Steve Henson, pointed out by Sven Heiberg <sven@tartu.cyber.ee>]
*) Modification to PKCS#7 encoding routines to output definite
length encoding. Since currently the whole structures are in
memory there's not real point in using indefinite length
constructed encoding. However if OpenSSL is compiled with
the flag PKCS7_INDEFINITE_ENCODING the old form is used.
[Steve Henson]
*) Added BIO_vprintf() and BIO_vsnprintf().
[Richard Levitte]
*) Added more prefixes to parse for in the the strings written
through a logging bio, to cover all the levels that are available
through syslog. The prefixes are now:
PANIC, EMERG, EMR => LOG_EMERG
ALERT, ALR => LOG_ALERT
CRIT, CRI => LOG_CRIT
ERROR, ERR => LOG_ERR
WARNING, WARN, WAR => LOG_WARNING
NOTICE, NOTE, NOT => LOG_NOTICE
INFO, INF => LOG_INFO
DEBUG, DBG => LOG_DEBUG
and as before, if none of those prefixes are present at the
beginning of the string, LOG_ERR is chosen.
On Win32, the LOG_* levels are mapped according to this:
LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
LOG_WARNING => EVENTLOG_WARNING_TYPE
LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
[Richard Levitte]
*) Made it possible to reconfigure with just the configuration
argument "reconf" or "reconfigure". The command line arguments
are stored in Makefile.ssl in the variable CONFIGURE_ARGS,
and are retrieved from there when reconfiguring.
[Richard Levitte]
*) MD4 implemented.
2000-08-18 17:50:41 +08:00
[Assar Westerlund <assar@sics.se>, Richard Levitte]
*) Add the arguments -CAfile and -CApath to the pkcs12 utility.
[Richard Levitte]
*) The obj_dat.pl script was messing up the sorting of object
names. The reason was that it compared the quoted version
of strings as a result "OCSP" > "OCSP Signing" because
" > SPACE. Changed script to store unquoted versions of
names and add quotes on output. It was also omitting some
names from the lookup table if they were given a default
value (that is if SN is missing it is given the same
value as LN and vice versa), these are now added on the
grounds that if an object has a name we should be able to
look it up. Finally added warning output when duplicate
short or long names are found.
[Steve Henson]
*) Changes needed for Tandem NSK.
2000-09-23 13:17:40 +08:00
[Scott Uroff <scott@xypro.com>]
2000-07-30 03:27:20 +08:00
*) Fix SSL 2.0 rollback checking: Due to an off-by-one error in
RSA_padding_check_SSLv23(), special padding was never detected
and thus the SSL 3.0/TLS 1.0 countermeasure against protocol
version rollback attacks was not effective.
In s23_clnt.c, don't use special rollback-attack detection padding
(RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
client; similarly, in s23_srvr.c, don't do the rollback check if
SSL 2.0 is the only protocol enabled in the server.
[Bodo Moeller]
*) Make it possible to get hexdumps of unprintable data with 'openssl
asn1parse'. By implication, the functions ASN1_parse_dump() and
BIO_dump_indent() are added.
[Richard Levitte]
*) New functions ASN1_STRING_print_ex() and X509_NAME_print_ex()
these print out strings and name structures based on various
flags including RFC2253 support and proper handling of
multibyte characters. Added options to the 'x509' utility
to allow the various flags to be set.
[Steve Henson]
*) Various fixes to use ASN1_TIME instead of ASN1_UTCTIME.
Also change the functions X509_cmp_current_time() and
X509_gmtime_adj() work with an ASN1_TIME structure,
this will enable certificates using GeneralizedTime in validity
dates to be checked.
[Steve Henson]
*) Make the NEG_PUBKEY_BUG code (which tolerates invalid
negative public key encodings) on by default,
NO_NEG_PUBKEY_BUG can be set to disable it.
[Steve Henson]
*) New function c2i_ASN1_OBJECT() which acts on ASN1_OBJECT
content octets. An i2c_ASN1_OBJECT is unnecessary because
the encoding can be trivially obtained from the structure.
[Steve Henson]
2000-07-21 23:17:04 +08:00
*) crypto/err.c locking bugfix: Use write locks (CRYPTO_w_[un]lock),
not read locks (CRYPTO_r_[un]lock).
[Bodo Moeller]
*) A first attempt at creating official support for shared
libraries through configuration. I've kept it so the
default is static libraries only, and the OpenSSL programs
are always statically linked for now, but there are
preparations for dynamic linking in place.
Apply the Tru64 patch from Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> His comments are: 1) Changes all references for `True64' to be `Tru64', which is the correct spelling for the OS name. 2) Makes `alpha-cc' be the same as `alpha164-cc', and adds an `alphaold-cc' entry that is the same as the previous `alpha-cc'. The reason is that most people these days are using the newer compiler, so it should be the default. 3) Adds a bit of commentary to Configure, regarding the name changes of the OS over the years, so it's not so confusing to people that haven't been with the OS for a while. 4) Adds an `alpha-cc-rpath' target (which is *not* selected automatically by Configure under any circumstance) that builds an RPATH into the shared libraries. This is explained in the comment in Configure. It's very very useful for people that want it, and people that don't want it just shouldn't choose that target. 5) Adds the `-pthread' flag as the best way to get POSIX thread support from the newer compiler. 6) Updates the Makefile targets, so that when the `alpha164-cc', `alpha-cc', or `alpha-cc-rpath' target is what Configure is set to use, it uses a Makefile target that includes the `-msym' option when building the shared library. This is a performance enhancement. 7) Updates `config' so that if it detects you're running version 4 or 5 of the OS, it automatically selects `alpha-cc', but uses `alphaold-cc' for versions 1-3 of the OS. 8) Updates the comment in opensslv.h, fixing both the OS name typo and adding a reference to IRIX 6.x, since the shared library semantics are virtually identical there.
2001-08-10 23:26:21 +08:00
This has been tested on Linux and Tru64.
[Richard Levitte]
2000-07-20 05:35:35 +08:00
*) Randomness polling function for Win9x, as described in:
Peter Gutmann, Software Generation of Practically Strong
Random Numbers.
[Ulf Möller]
2000-07-20 05:35:35 +08:00
*) Fix so PRNG is seeded in req if using an already existing
DSA key.
[Steve Henson]
*) New options to smime application. -inform and -outform
allow alternative formats for the S/MIME message including
PEM and DER. The -content option allows the content to be
specified separately. This should allow things like Netscape
form signing output easier to verify.
[Steve Henson]
*) Fix the ASN1 encoding of tags using the 'long form'.
[Steve Henson]
*) New ASN1 functions, i2c_* and c2i_* for INTEGER and BIT
STRING types. These convert content octets to and from the
underlying type. The actual tag and length octets are
already assumed to have been read in and checked. These
are needed because all other string types have virtually
identical handling apart from the tag. By having versions
of the ASN1 functions that just operate on content octets
IMPLICIT tagging can be handled properly. It also allows
the ASN1_ENUMERATED code to be cut down because ASN1_ENUMERATED
and ASN1_INTEGER are identical apart from the tag.
[Steve Henson]
2000-07-05 10:52:47 +08:00
*) Change the handling of OID objects as follows:
- New object identifiers are inserted in objects.txt, following
the syntax given in objects.README.
- objects.pl is used to process obj_mac.num and create a new
obj_mac.h.
- obj_dat.pl is used to create a new obj_dat.h, using the data in
obj_mac.h.
This is currently kind of a hack, and the perl code in objects.pl
isn't very elegant, but it works as I intended. The simplest way
to check that it worked correctly is to look in obj_dat.h and
check the array nid_objs and make sure the objects haven't moved
around (this is important!). Additions are OK, as well as
consistent name changes.
[Richard Levitte]
*) Add BSD-style MD5-based passwords to 'openssl passwd' (option '-1').
[Bodo Moeller]
2000-06-22 17:19:59 +08:00
*) Addition of the command line parameter '-rand file' to 'openssl req'.
2000-06-23 05:17:46 +08:00
The given file adds to whatever has already been seeded into the
random pool through the RANDFILE configuration file option or
environment variable, or the default random state file.
2000-06-22 17:19:59 +08:00
[Richard Levitte]
*) mkstack.pl now sorts each macro group into lexical order.
Previously the output order depended on the order the files
appeared in the directory, resulting in needless rewriting
of safestack.h .
[Steve Henson]
*) Patches to make OpenSSL compile under Win32 again. Mostly
work arounds for the VC++ problem that it treats func() as
func(void). Also stripped out the parts of mkdef.pl that
added extra typesafe functions: these no longer exist.
[Steve Henson]
*) Reorganisation of the stack code. The macros are now all
collected in safestack.h . Each macro is defined in terms of
a "stack macro" of the form SKM_<name>(type, a, b). The
DEBUG_SAFESTACK is now handled in terms of function casts,
this has the advantage of retaining type safety without the
use of additional functions. If DEBUG_SAFESTACK is not defined
then the non typesafe macros are used instead. Also modified the
mkstack.pl script to handle the new form. Needs testing to see
if which (if any) compilers it chokes and maybe make DEBUG_SAFESTACK
the default if no major problems. Similar behaviour for ASN1_SET_OF
and PKCS12_STACK_OF.
[Steve Henson]
*) When some versions of IIS use the 'NET' form of private key the
key derivation algorithm is different. Normally MD5(password) is
used as a 128 bit RC4 key. In the modified case
MD5(MD5(password) + "SGCKEYSALT") is used instead. Added some
new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
as the old Netscape_RSA functions except they have an additional
'sgckey' parameter which uses the modified algorithm. Also added
an -sgckey command line option to the rsa utility. Thanks to
Adrian Peck <bertie@ncipher.com> for posting details of the modified
algorithm to openssl-dev.
[Steve Henson]
*) The evp_local.h macros were using 'c.##kname' which resulted in
invalid expansion on some systems (SCO 5.0.5 for example).
Corrected to 'c.kname'.
[Phillip Porch <root@theporch.com>]
*) New X509_get1_email() and X509_REQ_get1_email() functions that return
a STACK of email addresses from a certificate or request, these look
in the subject name and the subject alternative name extensions and
omit any duplicate addresses.
[Steve Henson]
*) Re-implement BN_mod_exp2_mont using independent (and larger) windows.
This makes DSA verification about 2 % faster.
[Bodo Moeller]
*) Increase maximum window size in BN_mod_exp_... to 6 bits instead of 5
(meaning that now 2^5 values will be precomputed, which is only 4 KB
plus overhead for 1024 bit moduli).
This makes exponentiations about 0.5 % faster for 1024 bit
exponents (as measured by "openssl speed rsa2048").
[Bodo Moeller]
2000-06-08 23:01:14 +08:00
*) Rename memory handling macros to avoid conflicts with other
software:
Malloc => OPENSSL_malloc
Malloc_locked => OPENSSL_malloc_locked
Realloc => OPENSSL_realloc
Free => OPENSSL_free
[Richard Levitte]
*) New function BN_mod_exp_mont_word for small bases (roughly 15%
faster than BN_mod_exp_mont, i.e. 7% for a full DH exchange).
2000-06-08 05:29:25 +08:00
[Bodo Moeller]
*) CygWin32 support.
[John Jarvie <jjarvie@newsguy.com>]
*) The type-safe stack code has been rejigged. It is now only compiled
in when OpenSSL is configured with the DEBUG_SAFESTACK option and
by default all type-specific stack functions are "#define"d back to
standard stack functions. This results in more streamlined output
but retains the type-safety checking possibilities of the original
approach.
[Geoff Thorpe]
2000-06-01 10:36:58 +08:00
*) The STACK code has been cleaned up, and certain type declarations
that didn't make a lot of sense have been brought in line. This has
also involved a cleanup of sorts in safestack.h to more correctly
map type-safe stack functions onto their plain stack counterparts.
This work has also resulted in a variety of "const"ifications of
lots of the code, especially "_cmp" operations which should normally
be prototyped with "const" parameters anyway.
[Geoff Thorpe]
2000-05-31 05:44:36 +08:00
*) When generating bytes for the first time in md_rand.c, 'stir the pool'
by seeding with STATE_SIZE dummy bytes (with zero entropy count).
(The PRNG state consists of two parts, the large pool 'state' and 'md',
where all of 'md' is used each time the PRNG is used, but 'state'
is used only indexed by a cyclic counter. As entropy may not be
well distributed from the beginning, 'md' is important as a
chaining variable. However, the output function chains only half
of 'md', i.e. 80 bits. ssleay_rand_add, on the other hand, chains
all of 'md', and seeding with STATE_SIZE dummy bytes will result
in all of 'state' being rewritten, with the new values depending
on virtually all of 'md'. This overcomes the 80 bit limitation.)
[Bodo Moeller]
*) In ssl/s2_clnt.c and ssl/s3_clnt.c, call ERR_clear_error() when
the handshake is continued after ssl_verify_cert_chain();
otherwise, if SSL_VERIFY_NONE is set, remaining error codes
can lead to 'unexplainable' connection aborts later.
[Bodo Moeller; problem tracked down by Lutz Jaenicke]
*) Major EVP API cipher revision.
Add hooks for extra EVP features. This allows various cipher
parameters to be set in the EVP interface. Support added for variable
key length ciphers via the EVP_CIPHER_CTX_set_key_length() function and
setting of RC2 and RC5 parameters.
Modify EVP_OpenInit() and EVP_SealInit() to cope with variable key length
ciphers.
Remove lots of duplicated code from the EVP library. For example *every*
cipher init() function handles the 'iv' in the same way according to the
cipher mode. They also all do nothing if the 'key' parameter is NULL and
for CFB and OFB modes they zero ctx->num.
New functionality allows removal of S/MIME code RC2 hack.
Most of the routines have the same form and so can be declared in terms
of macros.
By shifting this to the top level EVP_CipherInit() it can be removed from
all individual ciphers. If the cipher wants to handle IVs or keys
differently it can set the EVP_CIPH_CUSTOM_IV or EVP_CIPH_ALWAYS_CALL_INIT
flags.
Change lots of functions like EVP_EncryptUpdate() to now return a
value: although software versions of the algorithms cannot fail
any installed hardware versions can.
[Steve Henson]
*) Implement SSL_OP_TLS_ROLLBACK_BUG: In ssl3_get_client_key_exchange, if
this option is set, tolerate broken clients that send the negotiated
protocol version number instead of the requested protocol version
number.
[Bodo Moeller]
*) Call dh_tmp_cb (set by ..._TMP_DH_CB) with correct 'is_export' flag;
i.e. non-zero for export ciphersuites, zero otherwise.
Previous versions had this flag inverted, inconsistent with
rsa_tmp_cb (..._TMP_RSA_CB).
[Bodo Moeller; problem reported by Amit Chopra]
*) Add missing DSA library text string. Work around for some IIS
key files with invalid SEQUENCE encoding.
[Steve Henson]
2000-05-19 05:25:48 +08:00
*) Add a document (doc/standards.txt) that list all kinds of standards
and so on that are implemented in OpenSSL.
[Richard Levitte]
*) Enhance c_rehash script. Old version would mishandle certificates
with the same subject name hash and wouldn't handle CRLs at all.
Added -fingerprint option to crl utility, to support new c_rehash
features.
[Steve Henson]
2000-05-16 06:54:43 +08:00
*) Eliminate non-ANSI declarations in crypto.h and stack.h.
[Ulf Möller]
2000-05-16 06:54:43 +08:00
2000-05-05 07:03:49 +08:00
*) Fix for SSL server purpose checking. Server checking was
rejecting certificates which had extended key usage present
but no ssl client purpose.
[Steve Henson, reported by Rene Grosser <grosser@hisolutions.com>]
*) Make PKCS#12 code work with no password. The PKCS#12 spec
is a little unclear about how a blank password is handled.
Since the password in encoded as a BMPString with terminating
double NULL a zero length password would end up as just the
double NULL. However no password at all is different and is
handled differently in the PKCS#12 key generation code. NS
treats a blank password as zero length. MSIE treats it as no
password on export: but it will try both on import. We now do
the same: PKCS12_parse() tries zero length and no password if
the password is set to "" or NULL (NULL is now a valid password:
it wasn't before) as does the pkcs12 application.
[Steve Henson]
2000-05-03 04:29:03 +08:00
*) Bugfixes in apps/x509.c: Avoid a memory leak; and don't use
perror when PEM_read_bio_X509_REQ fails, the error message must
be obtained from the error queue.
[Bodo Moeller]
*) Avoid 'thread_hash' memory leak in crypto/err/err.c by freeing
it in ERR_remove_state if appropriate, and change ERR_get_state
accordingly to avoid race conditions (this is necessary because
thread_hash is no longer constant once set).
[Bodo Moeller]
2000-04-27 23:06:26 +08:00
*) Bugfix for linux-elf makefile.one.
[Ulf Möller]
2000-04-27 23:06:26 +08:00
*) RSA_get_default_method() will now cause a default
RSA_METHOD to be chosen if one doesn't exist already.
Previously this was only set during a call to RSA_new()
or RSA_new_method(NULL) meaning it was possible for
RSA_get_default_method() to return NULL.
[Geoff Thorpe]
*) Added native name translation to the existing DSO code
that will convert (if the flag to do so is set) filenames
that are sufficiently small and have no path information
into a canonical native form. Eg. "blah" converted to
"libblah.so" or "blah.dll" etc.
[Geoff Thorpe]
2000-04-15 07:36:15 +08:00
*) New function ERR_error_string_n(e, buf, len) which is like
ERR_error_string(e, buf), but writes at most 'len' bytes
including the 0 terminator. For ERR_error_string_n, 'buf'
may not be NULL.
[Damien Miller <djm@mindrot.org>, Bodo Moeller]
2000-04-10 23:48:16 +08:00
*) CONF library reworked to become more general. A new CONF
configuration file reader "class" is implemented as well as a
new functions (NCONF_*, for "New CONF") to handle it. The now
old CONF_* functions are still there, but are reimplemented to
work in terms of the new functions. Also, a set of functions
to handle the internal storage of the configuration data is
provided to make it easier to write new configuration file
reader "classes" (I can definitely see something reading a
configuration file in XML format, for example), called _CONF_*,
or "the configuration storage API"...
The new configuration file reading functions are:
NCONF_new, NCONF_free, NCONF_load, NCONF_load_fp, NCONF_load_bio,
NCONF_get_section, NCONF_get_string, NCONF_get_numbre
2000-04-10 23:48:16 +08:00
NCONF_default, NCONF_WIN32
2000-04-10 23:48:16 +08:00
NCONF_dump_fp, NCONF_dump_bio
2000-04-10 23:48:16 +08:00
NCONF_default and NCONF_WIN32 are method (or "class") choosers,
NCONF_new creates a new CONF object. This works in the same way
as other interfaces in OpenSSL, like the BIO interface.
NCONF_dump_* dump the internal storage of the configuration file,
which is useful for debugging. All other functions take the same
arguments as the old CONF_* functions wth the exception of the
first that must be a `CONF *' instead of a `LHASH *'.
To make it easer to use the new classes with the old CONF_* functions,
the function CONF_set_default_method is provided.
[Richard Levitte]
*) Add '-tls1' option to 'openssl ciphers', which was already
mentioned in the documentation but had not been implemented.
(This option is not yet really useful because even the additional
experimental TLS 1.0 ciphers are currently treated as SSL 3.0 ciphers.)
[Bodo Moeller]
*) Initial DSO code added into libcrypto for letting OpenSSL (and
OpenSSL-based applications) load shared libraries and bind to
them in a portable way.
[Geoff Thorpe, with contributions from Richard Levitte]
Changes between 0.9.5 and 0.9.5a [1 Apr 2000]
*) Make sure _lrotl and _lrotr are only used with MSVC.
*) Use lock CRYPTO_LOCK_RAND correctly in ssleay_rand_status
(the default implementation of RAND_status).
*) Rename openssl x509 option '-crlext', which was added in 0.9.5,
to '-clrext' (= clear extensions), as intended and documented.
[Bodo Moeller; inconsistency pointed out by Michael Attili
<attili@amaxo.com>]
2000-03-27 08:53:27 +08:00
*) Fix for HMAC. It wasn't zeroing the rest of the block if the key length
was larger than the MD block size.
[Steve Henson, pointed out by Yost William <YostW@tce.com>]
*) Modernise PKCS12_parse() so it uses STACK_OF(X509) for its ca argument
fix a leak when the ca argument was passed as NULL. Stop X509_PUBKEY_set()
using the passed key: if the passed key was a private key the result
of X509_print(), for example, would be to print out all the private key
components.
[Steve Henson]
*) des_quad_cksum() byte order bug fix.
[Ulf Möller, using the problem description in krb4-0.9.7, where
the solution is attributed to Derrick J Brashear <shadow@DEMENTIA.ORG>]
2000-03-14 11:29:57 +08:00
*) Fix so V_ASN1_APP_CHOOSE works again: however its use is strongly
discouraged.
[Steve Henson, pointed out by Brian Korver <briank@cs.stanford.edu>]
2000-03-14 04:48:23 +08:00
*) For easily testing in shell scripts whether some command
'openssl XXX' exists, the new pseudo-command 'openssl no-XXX'
2000-03-14 05:01:05 +08:00
returns with exit code 0 iff no command of the given name is available.
2000-03-14 04:48:23 +08:00
'no-XXX' is printed in this case, 'XXX' otherwise. In both cases,
the output goes to stdout and nothing is printed to stderr.
Additional arguments are always ignored.
Since for each cipher there is a command of the same name,
the 'no-cipher' compilation switches can be tested this way.
2000-03-14 04:48:23 +08:00
('openssl no-XXX' is not able to detect pseudo-commands such
as 'quit', 'list-XXX-commands', or 'no-XXX' itself.)
[Bodo Moeller]
*) Update test suite so that 'make test' succeeds in 'no-rsa' configuration.
[Bodo Moeller]
*) For SSL_[CTX_]set_tmp_dh, don't create a DH key if SSL_OP_SINGLE_DH_USE
is set; it will be thrown away anyway because each handshake creates
its own key.
ssl_cert_dup, which is used by SSL_new, now copies DH keys in addition
to parameters -- in previous versions (since OpenSSL 0.9.3) the
'default key' from SSL_CTX_set_tmp_dh would always be lost, meaning
you effectivly got SSL_OP_SINGLE_DH_USE when using this macro.
[Bodo Moeller]
2000-03-10 21:49:02 +08:00
*) New s_client option -ign_eof: EOF at stdin is ignored, and
'Q' and 'R' lose their special meanings (quit/renegotiate).
This is part of what -quiet does; unlike -quiet, -ign_eof
does not suppress any output.
[Richard Levitte]
2000-03-07 23:10:08 +08:00
*) Add compatibility options to the purpose and trust code. The
purpose X509_PURPOSE_ANY is "any purpose" which automatically
accepts a certificate or CA, this was the previous behaviour,
with all the associated security issues.
X509_TRUST_COMPAT is the old trust behaviour: only and
automatically trust self signed roots in certificate store. A
new trust setting X509_TRUST_DEFAULT is used to specify that
a purpose has no associated trust setting and it should instead
use the value in the default purpose.
[Steve Henson]
*) Fix the PKCS#8 DSA private key code so it decodes keys again
and fix a memory leak.
[Steve Henson]
*) In util/mkerr.pl (which implements 'make errors'), preserve
reason strings from the previous version of the .c file, as
the default to have only downcase letters (and digits) in
automatically generated reasons codes is not always appropriate.
[Bodo Moeller]
*) In ERR_load_ERR_strings(), build an ERR_LIB_SYS error reason table
using strerror. Previously, ERR_reason_error_string() returned
library names as reason strings for SYSerr; but SYSerr is a special
case where small numbers are errno values, not library numbers.
[Bodo Moeller]
*) Add '-dsaparam' option to 'openssl dhparam' application. This
converts DSA parameters into DH parameters. (When creating parameters,
DSA_generate_parameters is used.)
[Bodo Moeller]
*) Include 'length' (recommended exponent length) in C code generated
by 'openssl dhparam -C'.
[Bodo Moeller]
*) The second argument to set_label in perlasm was already being used
so couldn't be used as a "file scope" flag. Moved to third argument
which was free.
[Steve Henson]
*) In PEM_ASN1_write_bio and some other functions, use RAND_pseudo_bytes
instead of RAND_bytes for encryption IVs and salts.
[Bodo Moeller]
*) Include RAND_status() into RAND_METHOD instead of implementing
it only for md_rand.c Otherwise replacing the PRNG by calling
RAND_set_rand_method would be impossible.
[Bodo Moeller]
2000-03-02 03:07:58 +08:00
*) Don't let DSA_generate_key() enter an infinite loop if the random
number generation fails.
[Bodo Moeller]
2000-03-01 15:57:25 +08:00
*) New 'rand' application for creating pseudo-random output.
[Bodo Moeller]
*) Added configuration support for Linux/IA64
[Rolf Haberrecker <rolf@suse.de>]
2000-02-29 03:16:41 +08:00
*) Assembler module support for Mingw32.
[Ulf Möller]
2000-02-29 03:16:41 +08:00
*) Shared library support for HPUX (in shlib/).
[Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE> and Anonymous]
*) Shared library support for Solaris gcc.
[Lutz Behnke <behnke@trustcenter.de>]
2000-02-28 19:59:02 +08:00
Changes between 0.9.4 and 0.9.5 [28 Feb 2000]
*) PKCS7_encrypt() was adding text MIME headers twice because they
were added manually and by SMIME_crlf_copy().
[Steve Henson]
*) In bntest.c don't call BN_rand with zero bits argument.
[Steve Henson, pointed out by Andrew W. Gray <agray@iconsinc.com>]
2000-02-27 10:05:39 +08:00
*) BN_mul bugfix: In bn_mul_part_recursion() only the a>a[n] && b>b[n]
case was implemented. This caused BN_div_recp() to fail occasionally.
[Ulf Möller]
2000-02-27 10:05:39 +08:00
*) Add an optional second argument to the set_label() in the perl
assembly language builder. If this argument exists and is set
to 1 it signals that the assembler should use a symbol whose
scope is the entire file, not just the current function. This
is needed with MASM which uses the format label:: for this scope.
[Steve Henson, pointed out by Peter Runestig <peter@runestig.com>]
*) Change the ASN1 types so they are typedefs by default. Before
almost all types were #define'd to ASN1_STRING which was causing
STACK_OF() problems: you couldn't declare STACK_OF(ASN1_UTF8STRING)
for example.
[Steve Henson]
*) Change names of new functions to the new get1/get0 naming
convention: After 'get1', the caller owns a reference count
and has to call ..._free; 'get0' returns a pointer to some
data structure without incrementing reference counters.
(Some of the existing 'get' functions increment a reference
counter, some don't.)
Similarly, 'set1' and 'add1' functions increase reference
counters or duplicate objects.
2000-02-26 09:55:33 +08:00
[Steve Henson]
*) Allow for the possibility of temp RSA key generation failure:
the code used to assume it always worked and crashed on failure.
[Steve Henson]
2000-02-25 06:57:42 +08:00
*) Fix potential buffer overrun problem in BIO_printf().
[Ulf Möller, using public domain code by Patrick Powell; problem
2000-02-25 06:57:42 +08:00
pointed out by David Sacerdote <das33@cornell.edu>]
2000-02-24 10:51:47 +08:00
*) Support EGD <http://www.lothar.com/tech/crypto/>. New functions
RAND_egd() and RAND_status(). In the command line application,
the EGD socket can be specified like a seed file using RANDFILE
or -rand.
[Ulf Möller]
2000-02-24 10:51:47 +08:00
*) Allow the string CERTIFICATE to be tolerated in PKCS#7 structures.
Some CAs (e.g. Verisign) distribute certificates in this form.
[Steve Henson]
*) Remove the SSL_ALLOW_ADH compile option and set the default cipher
list to exclude them. This means that no special compilation option
is needed to use anonymous DH: it just needs to be included in the
cipher list.
[Steve Henson]
*) Change the EVP_MD_CTX_type macro so its meaning consistent with
EVP_MD_type. The old functionality is available in a new macro called
EVP_MD_md(). Change code that uses it and update docs.
[Steve Henson]
*) ..._ctrl functions now have corresponding ..._callback_ctrl functions
where the 'void *' argument is replaced by a function pointer argument.
Previously 'void *' was abused to point to functions, which works on
many platforms, but is not correct. As these functions are usually
called by macros defined in OpenSSL header files, most source code
should work without changes.
2000-02-24 05:57:22 +08:00
[Richard Levitte]
*) <openssl/opensslconf.h> (which is created by Configure) now contains
sections with information on -D... compiler switches used for
compiling the library so that applications can see them. To enable
one of these sections, a pre-processor symbol OPENSSL_..._DEFINES
must be defined. E.g.,
#define OPENSSL_ALGORITHM_DEFINES
#include <openssl/opensslconf.h>
defines all pertinent NO_<algo> symbols, such as NO_IDEA, NO_RSA, etc.
[Richard Levitte, Ulf and Bodo Möller]
*) Bugfix: Tolerate fragmentation and interleaving in the SSL 3/TLS
record layer.
[Bodo Moeller]
*) Change the 'other' type in certificate aux info to a STACK_OF
X509_ALGOR. Although not an AlgorithmIdentifier as such it has
the required ASN1 format: arbitrary types determined by an OID.
[Steve Henson]
*) Add some PEM_write_X509_REQ_NEW() functions and a command line
argument to 'req'. This is not because the function is newer or
better than others it just uses the work 'NEW' in the certificate
request header lines. Some software needs this.
[Steve Henson]
2000-02-17 07:16:01 +08:00
*) Reorganise password command line arguments: now passwords can be
obtained from various sources. Delete the PEM_cb function and make
it the default behaviour: i.e. if the callback is NULL and the
usrdata argument is not NULL interpret it as a null terminated pass
phrase. If usrdata and the callback are NULL then the pass phrase
is prompted for as usual.
[Steve Henson]
*) Add support for the Compaq Atalla crypto accelerator. If it is installed,
the support is automatically enabled. The resulting binaries will
autodetect the card and use it if present.
[Ben Laurie and Compaq Inc.]
2000-02-15 22:19:44 +08:00
*) Work around for Netscape hang bug. This sends certificate request
and server done in one record. Since this is perfectly legal in the
SSL/TLS protocol it isn't a "bug" option and is on by default. See
the bugs/SSLv3 entry for more info.
[Steve Henson]
*) HP-UX tune-up: new unified configs, HP C compiler bug workaround.
[Andy Polyakov]
*) Add -rand argument to smime and pkcs12 applications and read/write
of seed file.
[Steve Henson]
2000-02-12 01:18:50 +08:00
*) New 'passwd' tool for crypt(3) and apr1 password hashes.
2000-02-11 05:50:52 +08:00
[Bodo Moeller]
*) Add command line password options to the remaining applications.
[Steve Henson]
*) Bug fix for BN_div_recp() for numerators with an even number of
bits.
[Ulf Möller]
*) More tests in bntest.c, and changed test_bn output.
[Ulf Möller]
*) ./config recognizes MacOS X now.
[Andy Polyakov]
*) Bug fix for BN_div() when the first words of num and divsor are
equal (it gave wrong results if (rem=(n1-q*d0)&BN_MASK2) < d0).
[Ulf Möller]
*) Add support for various broken PKCS#8 formats, and command line
options to produce them.
[Steve Henson]
*) New functions BN_CTX_start(), BN_CTX_get() and BT_CTX_end() to
get temporary BIGNUMs from a BN_CTX.
[Ulf Möller]
*) Correct return values in BN_mod_exp_mont() and BN_mod_exp2_mont()
for p == 0.
[Ulf Möller]
*) Change the SSLeay_add_all_*() functions to OpenSSL_add_all_*() and
include a #define from the old name to the new. The original intent
was that statically linked binaries could for example just call
SSLeay_add_all_ciphers() to just add ciphers to the table and not
link with digests. This never worked because SSLeay_add_all_digests()
and SSLeay_add_all_ciphers() were in the same source file so calling
one would link with the other. They are now in separate source files.
[Steve Henson]
*) Add a new -notext option to 'ca' and a -pubkey option to 'spkac'.
[Steve Henson]
2000-02-03 05:20:44 +08:00
*) Use a less unusual form of the Miller-Rabin primality test (it used
a binary algorithm for exponentiation integrated into the Miller-Rabin
loop, our standard modexp algorithms are faster).
[Bodo Moeller]
2000-02-01 15:50:42 +08:00
*) Support for the EBCDIC character set completed.
[Martin Kraemer <Martin.Kraemer@Mch.SNI.De>]
2000-01-31 07:34:33 +08:00
*) Source code cleanups: use const where appropriate, eliminate casts,
use void * instead of char * in lhash.
[Ulf Möller]
2000-01-31 07:34:33 +08:00
*) Bugfix: ssl3_send_server_key_exchange was not restartable
(the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of
this the server could overwrite ephemeral keys that the client
has already seen).
[Bodo Moeller]
*) Turn DSA_is_prime into a macro that calls BN_is_prime,
using 50 iterations of the Rabin-Miller test.
DSA_generate_parameters now uses BN_is_prime_fasttest (with 50
iterations of the Rabin-Miller test as required by the appendix
to FIPS PUB 186[-1]) instead of DSA_is_prime.
As BN_is_prime_fasttest includes trial division, DSA parameter
generation becomes much faster.
This implies a change for the callback functions in DSA_is_prime
and DSA_generate_parameters: The callback function is called once
for each positive witness in the Rabin-Miller test, not just
occasionally in the inner loop; and the parameters to the
callback function now provide an iteration count for the outer
loop rather than for the current invocation of the inner loop.
DSA_generate_parameters additionally can call the callback
function with an 'iteration count' of -1, meaning that a
candidate has passed the trial division test (when q is generated
from an application-provided seed, trial division is skipped).
[Bodo Moeller]
*) New function BN_is_prime_fasttest that optionally does trial
division before starting the Rabin-Miller test and has
an additional BN_CTX * argument (whereas BN_is_prime always
has to allocate at least one BN_CTX).
'callback(1, -1, cb_arg)' is called when a number has passed the
trial division stage.
[Bodo Moeller]
2000-01-29 08:00:26 +08:00
*) Fix for bug in CRL encoding. The validity dates weren't being handled
as ASN1_TIME.
[Steve Henson]
*) New -pkcs12 option to CA.pl script to write out a PKCS#12 file.
[Steve Henson]
*) New function BN_pseudo_rand().
[Ulf Möller]
2000-01-27 09:50:42 +08:00
*) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable)
bignum version of BN_from_montgomery() with the working code from
SSLeay 0.9.0 (the word based version is faster anyway), and clean up
the comments.
[Ulf Möller]
2000-01-27 09:50:42 +08:00
2000-01-25 01:57:56 +08:00
*) Avoid a race condition in s2_clnt.c (function get_server_hello) that
made it impossible to use the same SSL_SESSION data structure in
SSL2 clients in multiple threads.
[Bodo Moeller]
2000-01-25 00:02:29 +08:00
*) The return value of RAND_load_file() no longer counts bytes obtained
by stat(). RAND_load_file(..., -1) is new and uses the complete file
to seed the PRNG (previously an explicit byte count was required).
[Ulf Möller, Bodo Möller]
2000-01-24 22:42:26 +08:00
2000-01-24 07:41:49 +08:00
*) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes
used (char *) instead of (void *) and had casts all over the place.
[Steve Henson]
*) Make BN_generate_prime() return NULL on error if ret!=NULL.
[Ulf Möller]
*) Retain source code compatibility for BN_prime_checks macro:
BN_is_prime(..., BN_prime_checks, ...) now uses
BN_prime_checks_for_size to determine the appropriate number of
Rabin-Miller iterations.
[Ulf Möller]
*) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to
DH_CHECK_P_NOT_SAFE_PRIME.
(Check if this is true? OpenPGP calls them "strong".)
[Ulf Möller]
*) Merge the functionality of "dh" and "gendh" programs into a new program
"dhparam". The old programs are retained for now but will handle DH keys
(instead of parameters) in future.
[Steve Henson]
*) Make the ciphers, s_server and s_client programs check the return values
when a new cipher list is set.
[Steve Henson]
*) Enhance the SSL/TLS cipher mechanism to correctly handle the TLS 56bit
ciphers. Before when the 56bit ciphers were enabled the sorting was
wrong.
The syntax for the cipher sorting has been extended to support sorting by
cipher-strength (using the strength_bits hard coded in the tables).
The new command is "@STRENGTH" (see also doc/apps/ciphers.pod).
Fix a bug in the cipher-command parser: when supplying a cipher command
string with an "undefined" symbol (neither command nor alphanumeric
[A-Za-z0-9], ssl_set_cipher_list used to hang in an endless loop. Now
an error is flagged.
Due to the strength-sorting extension, the code of the
ssl_create_cipher_list() function was completely rearranged. I hope that
the readability was also increased :-)
[Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
*) Minor change to 'x509' utility. The -CAcreateserial option now uses 1
for the first serial number and places 2 in the serial number file. This
avoids problems when the root CA is created with serial number zero and
the first user certificate has the same issuer name and serial number
as the root CA.
[Steve Henson]
*) Fixes to X509_ATTRIBUTE utilities, change the 'req' program so it uses
the new code. Add documentation for this stuff.
[Steve Henson]
*) Changes to X509_ATTRIBUTE utilities. These have been renamed from
X509_*() to X509at_*() on the grounds that they don't handle X509
structures and behave in an analogous way to the X509v3 functions:
they shouldn't be called directly but wrapper functions should be used
instead.
So we also now have some wrapper functions that call the X509at functions
when passed certificate requests. (TO DO: similar things can be done with
PKCS#7 signed and unsigned attributes, PKCS#12 attributes and a few other
things. Some of these need some d2i or i2d and print functionality
because they handle more complex structures.)
[Steve Henson]
*) Add missing #ifndefs that caused missing symbols when building libssl
as a shared library without RSA. Use #ifndef NO_SSL2 instead of
NO_RSA in ssl/s2*.c.
[Kris Kennaway <kris@hub.freebsd.org>, modified by Ulf Möller]
*) Precautions against using the PRNG uninitialized: RAND_bytes() now
has a return value which indicates the quality of the random data
(1 = ok, 0 = not seeded). Also an error is recorded on the thread's
error queue. New function RAND_pseudo_bytes() generates output that is
guaranteed to be unique but not unpredictable. RAND_add is like
RAND_seed, but takes an extra argument for an entropy estimate
(RAND_seed always assumes full entropy).
[Ulf Möller]
*) Do more iterations of Rabin-Miller probable prime test (specifically,
3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes
instead of only 2 for all lengths; see BN_prime_checks_for_size definition
in crypto/bn/bn_prime.c for the complete table). This guarantees a
false-positive rate of at most 2^-80 for random input.
[Bodo Moeller]
*) Rewrite ssl3_read_n (ssl/s3_pkt.c) avoiding a couple of bugs.
2000-01-11 09:07:26 +08:00
[Bodo Moeller]
*) New function X509_CTX_rget_chain() (renamed to X509_CTX_get1_chain
in the 0.9.5 release), this returns the chain
from an X509_CTX structure with a dup of the stack and all
the X509 reference counts upped: so the stack will exist
after X509_CTX_cleanup() has been called. Modify pkcs12.c
to use this.
Also make SSL_SESSION_print() print out the verify return
code.
[Steve Henson]
*) Add manpage for the pkcs12 command. Also change the default
behaviour so MAC iteration counts are used unless the new
-nomaciter option is used. This improves file security and
only older versions of MSIE (4.0 for example) need it.
[Steve Henson]
*) Honor the no-xxx Configure options when creating .DEF files.
[Ulf Möller]
2000-01-07 08:55:54 +08:00
*) Add PKCS#10 attributes to field table: challengePassword,
unstructuredName and unstructuredAddress. These are taken from
draft PKCS#9 v2.0 but are compatible with v1.2 provided no
international characters are used.
More changes to X509_ATTRIBUTE code: allow the setting of types
based on strings. Remove the 'loc' parameter when adding
attributes because these will be a SET OF encoding which is sorted
in ASN1 order.
[Steve Henson]
*) Initial changes to the 'req' utility to allow request generation
automation. This will allow an application to just generate a template
file containing all the field values and have req construct the
request.
Initial support for X509_ATTRIBUTE handling. Stacks of these are
used all over the place including certificate requests and PKCS#7
structures. They are currently handled manually where necessary with
some primitive wrappers for PKCS#7. The new functions behave in a
manner analogous to the X509 extension functions: they allow
attributes to be looked up by NID and added.
Later something similar to the X509V3 code would be desirable to
automatically handle the encoding, decoding and printing of the
more complex types. The string types like challengePassword can
be handled by the string table functions.
Also modified the multi byte string table handling. Now there is
a 'global mask' which masks out certain types. The table itself
can use the flag STABLE_NO_MASK to ignore the mask setting: this
is useful when for example there is only one permissible type
(as in countryName) and using the mask might result in no valid
types at all.
[Steve Henson]
*) Clean up 'Finished' handling, and add functions SSL_get_finished and
SSL_get_peer_finished to allow applications to obtain the latest
Finished messages sent to the peer or expected from the peer,
respectively. (SSL_get_peer_finished is usually the Finished message
actually received from the peer, otherwise the protocol will be aborted.)
As the Finished message are message digests of the complete handshake
(with a total of 192 bits for TLS 1.0 and more for SSL 3.0), they can
be used for external authentication procedures when the authentication
provided by SSL/TLS is not desired or is not enough.
[Bodo Moeller]
*) Enhanced support for Alpha Linux is added. Now ./config checks if
the host supports BWX extension and if Compaq C is present on the
$PATH. Just exploiting of the BWX extension results in 20-30%
performance kick for some algorithms, e.g. DES and RC4 to mention
a couple. Compaq C in turn generates ~20% faster code for MD5 and
SHA1.
[Andy Polyakov]
2000-01-03 02:52:58 +08:00
*) Add support for MS "fast SGC". This is arguably a violation of the
SSL3/TLS protocol. Netscape SGC does two handshakes: the first with
weak crypto and after checking the certificate is SGC a second one
with strong crypto. MS SGC stops the first handshake after receiving
the server certificate message and sends a second client hello. Since
a server will typically do all the time consuming operations before
expecting any further messages from the client (server key exchange
is the most expensive) there is little difference between the two.
To get OpenSSL to support MS SGC we have to permit a second client
hello message after we have sent server done. In addition we have to
reset the MAC if we do get this second client hello.
2000-01-03 02:52:58 +08:00
[Steve Henson]
*) Add a function 'd2i_AutoPrivateKey()' this will automatically decide
if a DER encoded private key is RSA or DSA traditional format. Changed
d2i_PrivateKey_bio() to use it. This is only needed for the "traditional"
format DER encoded private key. Newer code should use PKCS#8 format which
has the key type encoded in the ASN1 structure. Added DER private key
support to pkcs8 application.
[Steve Henson]
*) SSL 3/TLS 1 servers now don't request certificates when an anonymous
ciphersuites has been selected (as required by the SSL 3/TLS 1
specifications). Exception: When SSL_VERIFY_FAIL_IF_NO_PEER_CERT
is set, we interpret this as a request to violate the specification
(the worst that can happen is a handshake failure, and 'correct'
behaviour would result in a handshake failure anyway).
[Bodo Moeller]
*) In SSL_CTX_add_session, take into account that there might be multiple
SSL_SESSION structures with the same session ID (e.g. when two threads
concurrently obtain them from an external cache).
The internal cache can handle only one SSL_SESSION with a given ID,
so if there's a conflict, we now throw out the old one to achieve
consistency.
[Bodo Moeller]
*) Add OIDs for idea and blowfish in CBC mode. This will allow both
to be used in PKCS#5 v2.0 and S/MIME. Also add checking to
some routines that use cipher OIDs: some ciphers do not have OIDs
defined and so they cannot be used for S/MIME and PKCS#5 v2.0 for
example.
[Steve Henson]
*) Simplify the trust setting structure and code. Now we just have
two sequences of OIDs for trusted and rejected settings. These will
typically have values the same as the extended key usage extension
and any application specific purposes.
The trust checking code now has a default behaviour: it will just
check for an object with the same NID as the passed id. Functions can
be provided to override either the default behaviour or the behaviour
for a given id. SSL client, server and email already have functions
in place for compatibility: they check the NID and also return "trusted"
if the certificate is self signed.
[Steve Henson]
*) Add d2i,i2d bio/fp functions for PrivateKey: these convert the
traditional format into an EVP_PKEY structure.
[Steve Henson]
*) Add a password callback function PEM_cb() which either prompts for
a password if usr_data is NULL or otherwise assumes it is a null
terminated password. Allow passwords to be passed on command line
environment or config files in a few more utilities.
[Steve Henson]
*) Add a bunch of DER and PEM functions to handle PKCS#8 format private
keys. Add some short names for PKCS#8 PBE algorithms and allow them
to be specified on the command line for the pkcs8 and pkcs12 utilities.
Update documentation.
[Steve Henson]
1999-12-22 09:39:23 +08:00
*) Support for ASN1 "NULL" type. This could be handled before by using
ASN1_TYPE but there wasn't any function that would try to read a NULL
and produce an error if it couldn't. For compatibility we also have
1999-12-22 09:39:23 +08:00
ASN1_NULL_new() and ASN1_NULL_free() functions but these are faked and
don't allocate anything because they don't need to.
[Steve Henson]
*) Initial support for MacOS is now provided. Examine INSTALL.MacOS
for details.
[Andy Polyakov, Roy Woods <roy@centicsystems.ca>]
*) Rebuild of the memory allocation routines used by OpenSSL code and
possibly others as well. The purpose is to make an interface that
provide hooks so anyone can build a separate set of allocation and
deallocation routines to be used by OpenSSL, for example memory
pool implementations, or something else, which was previously hard
since Malloc(), Realloc() and Free() were defined as macros having
2000-01-12 06:32:37 +08:00
the values malloc, realloc and free, respectively (except for Win32
compilations). The same is provided for memory debugging code.
OpenSSL already comes with functionality to find memory leaks, but
this gives people a chance to debug other memory problems.
With these changes, a new set of functions and macros have appeared:
CRYPTO_set_mem_debug_functions() [F]
CRYPTO_get_mem_debug_functions() [F]
CRYPTO_dbg_set_options() [F]
CRYPTO_dbg_get_options() [F]
CRYPTO_malloc_debug_init() [M]
The memory debug functions are NULL by default, unless the library
is compiled with CRYPTO_MDEBUG or friends is defined. If someone
wants to debug memory anyway, CRYPTO_malloc_debug_init() (which
gives the standard debugging functions that come with OpenSSL) or
CRYPTO_set_mem_debug_functions() (tells OpenSSL to use functions
provided by the library user) must be used. When the standard
debugging functions are used, CRYPTO_dbg_set_options can be used to
request additional information:
CRYPTO_dbg_set_options(V_CYRPTO_MDEBUG_xxx) corresponds to setting
the CRYPTO_MDEBUG_xxx macro when compiling the library.
Also, things like CRYPTO_set_mem_functions will always give the
expected result (the new set of functions is used for allocation
and deallocation) at all times, regardless of platform and compiler
options.
To finish it up, some functions that were never use in any other
way than through macros have a new API and new semantic:
CRYPTO_dbg_malloc()
CRYPTO_dbg_realloc()
CRYPTO_dbg_free()
All macros of value have retained their old syntax.
[Richard Levitte and Bodo Moeller]
1999-12-12 04:04:06 +08:00
*) Some S/MIME fixes. The OID for SMIMECapabilities was wrong, the
ordering of SMIMECapabilities wasn't in "strength order" and there
was a missing NULL in the AlgorithmIdentifier for the SHA1 signature
algorithm.
[Steve Henson]
*) Some ASN1 types with illegal zero length encoding (INTEGER,
ENUMERATED and OBJECT IDENTIFIER) choked the ASN1 routines.
[Frans Heymans <fheymans@isaserver.be>, modified by Steve Henson]
*) Merge in my S/MIME library for OpenSSL. This provides a simple
S/MIME API on top of the PKCS#7 code, a MIME parser (with enough
functionality to handle multipart/signed properly) and a utility
called 'smime' to call all this stuff. This is based on code I
originally wrote for Celo who have kindly allowed it to be
included in OpenSSL.
[Steve Henson]
*) Add variants des_set_key_checked and des_set_key_unchecked of
des_set_key (aka des_key_sched). Global variable des_check_key
decides which of these is called by des_set_key; this way
des_check_key behaves as it always did, but applications and
the library itself, which was buggy for des_check_key == 1,
have a cleaner way to pick the version they need.
[Bodo Moeller]
1999-12-03 11:46:18 +08:00
*) New function PKCS12_newpass() which changes the password of a
PKCS12 structure.
[Steve Henson]
*) Modify X509_TRUST and X509_PURPOSE so it also uses a static and
dynamic mix. In both cases the ids can be used as an index into the
table. Also modified the X509_TRUST_add() and X509_PURPOSE_add()
functions so they accept a list of the field values and the
application doesn't need to directly manipulate the X509_TRUST
structure.
[Steve Henson]
*) Modify the ASN1_STRING_TABLE stuff so it also uses bsearch and doesn't
need initialising.
[Steve Henson]
*) Modify the way the V3 extension code looks up extensions. This now
works in a similar way to the object code: we have some "standard"
extensions in a static table which is searched with OBJ_bsearch()
and the application can add dynamic ones if needed. The file
crypto/x509v3/ext_dat.h now has the info: this file needs to be
updated whenever a new extension is added to the core code and kept
in ext_nid order. There is a simple program 'tabtest.c' which checks
this. New extensions are not added too often so this file can readily
be maintained manually.
There are two big advantages in doing things this way. The extensions
can be looked up immediately and no longer need to be "added" using
X509V3_add_standard_extensions(): this function now does nothing.
[Side note: I get *lots* of email saying the extension code doesn't
work because people forget to call this function]
Also no dynamic allocation is done unless new extensions are added:
so if we don't add custom extensions there is no need to call
X509V3_EXT_cleanup().
[Steve Henson]
*) Modify enc utility's salting as follows: make salting the default. Add a
magic header, so unsalted files fail gracefully instead of just decrypting
to garbage. This is because not salting is a big security hole, so people
should be discouraged from doing it.
[Ben Laurie]
*) Fixes and enhancements to the 'x509' utility. It allowed a message
digest to be passed on the command line but it only used this
parameter when signing a certificate. Modified so all relevant
operations are affected by the digest parameter including the
-fingerprint and -x509toreq options. Also -x509toreq choked if a
DSA key was used because it didn't fix the digest.
[Steve Henson]
*) Initial certificate chain verify code. Currently tests the untrusted
certificates for consistency with the verify purpose (which is set
when the X509_STORE_CTX structure is set up) and checks the pathlength.
There is a NO_CHAIN_VERIFY compilation option to keep the old behaviour:
this is because it will reject chains with invalid extensions whereas
every previous version of OpenSSL and SSLeay made no checks at all.
Trust code: checks the root CA for the relevant trust settings. Trust
settings have an initial value consistent with the verify purpose: e.g.
if the verify purpose is for SSL client use it expects the CA to be
trusted for SSL client use. However the default value can be changed to
permit custom trust settings: one example of this would be to only trust
certificates from a specific "secure" set of CAs.
Also added X509_STORE_CTX_new() and X509_STORE_CTX_free() functions
which should be used for version portability: especially since the
verify structure is likely to change more often now.
SSL integration. Add purpose and trust to SSL_CTX and SSL and functions
to set them. If not set then assume SSL clients will verify SSL servers
and vice versa.
Two new options to the verify program: -untrusted allows a set of
untrusted certificates to be passed in and -purpose which sets the
intended purpose of the certificate. If a purpose is set then the
new chain verify code is used to check extension consistency.
[Steve Henson]
*) Support for the authority information access extension.
[Steve Henson]
*) Modify RSA and DSA PEM read routines to transparently handle
PKCS#8 format private keys. New *_PUBKEY_* functions that handle
public keys in a format compatible with certificate
SubjectPublicKeyInfo structures. Unfortunately there were already
functions called *_PublicKey_* which used various odd formats so
these are retained for compatibility: however the DSA variants were
never in a public release so they have been deleted. Changed dsa/rsa
utilities to handle the new format: note no releases ever handled public
keys so we should be OK.
The primary motivation for this change is to avoid the same fiasco
that dogs private keys: there are several incompatible private key
formats some of which are standard and some OpenSSL specific and
require various evil hacks to allow partial transparent handling and
even then it doesn't work with DER formats. Given the option anything
other than PKCS#8 should be dumped: but the other formats have to
stay in the name of compatibility.
With public keys and the benefit of hindsight one standard format
is used which works with EVP_PKEY, RSA or DSA structures: though
it clearly returns an error if you try to read the wrong kind of key.
Added a -pubkey option to the 'x509' utility to output the public key.
Also rename the EVP_PKEY_get_*() to EVP_PKEY_rget_*()
(renamed to EVP_PKEY_get1_*() in the OpenSSL 0.9.5 release) and add
EVP_PKEY_rset_*() functions (renamed to EVP_PKEY_set1_*())
that do the same as the EVP_PKEY_assign_*() except they up the
reference count of the added key (they don't "swallow" the
supplied key).
[Steve Henson]
*) Fixes to crypto/x509/by_file.c the code to read in certificates and
CRLs would fail if the file contained no certificates or no CRLs:
added a new function to read in both types and return the number
read: this means that if none are read it will be an error. The
DER versions of the certificate and CRL reader would always fail
because it isn't possible to mix certificates and CRLs in DER format
without choking one or the other routine. Changed this to just read
a certificate: this is the best we can do. Also modified the code
in apps/verify.c to take notice of return codes: it was previously
attempting to read in certificates from NULL pointers and ignoring
any errors: this is one reason why the cert and CRL reader seemed
to work. It doesn't check return codes from the default certificate
routines: these may well fail if the certificates aren't installed.
[Steve Henson]
1999-11-19 10:19:58 +08:00
*) Code to support otherName option in GeneralName.
[Steve Henson]
*) First update to verify code. Change the verify utility
so it warns if it is passed a self signed certificate:
for consistency with the normal behaviour. X509_verify
has been modified to it will now verify a self signed
certificate if *exactly* the same certificate appears
in the store: it was previously impossible to trust a
single self signed certificate. This means that:
openssl verify ss.pem
now gives a warning about a self signed certificate but
openssl verify -CAfile ss.pem ss.pem
is OK.
[Steve Henson]
*) For servers, store verify_result in SSL_SESSION data structure
(and add it to external session representation).
This is needed when client certificate verifications fails,
but an application-provided verification callback (set by
SSL_CTX_set_cert_verify_callback) allows accepting the session
anyway (i.e. leaves x509_store_ctx->error != X509_V_OK
but returns 1): When the session is reused, we have to set
ssl->verify_result to the appropriate error code to avoid
security holes.
[Bodo Moeller, problem pointed out by Lutz Jaenicke]
*) Fix a bug in the new PKCS#7 code: it didn't consider the
case in PKCS7_dataInit() where the signed PKCS7 structure
didn't contain any existing data because it was being created.
[Po-Cheng Chen <pocheng@nst.com.tw>, slightly modified by Steve Henson]
*) Add a salt to the key derivation routines in enc.c. This
forms the first 8 bytes of the encrypted file. Also add a
-S option to allow a salt to be input on the command line.
[Steve Henson]
1999-11-16 08:56:03 +08:00
*) New function X509_cmp(). Oddly enough there wasn't a function
to compare two certificates. We do this by working out the SHA1
hash and comparing that. X509_cmp() will be needed by the trust
code.
[Steve Henson]
2000-01-29 05:26:30 +08:00
*) SSL_get1_session() is like SSL_get_session(), but increments
the reference count in the SSL_SESSION returned.
[Geoff Thorpe <geoff@eu.c2.net>]
*) Fix for 'req': it was adding a null to request attributes.
Also change the X509_LOOKUP and X509_INFO code to handle
certificate auxiliary information.
[Steve Henson]
*) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
the 'enc' command.
[Steve Henson]
*) Add the possibility to add extra information to the memory leak
detecting output, to form tracebacks, showing from where each
allocation was originated: CRYPTO_push_info("constant string") adds
the string plus current file name and line number to a per-thread
stack, CRYPTO_pop_info() does the obvious, CRYPTO_remove_all_info()
is like calling CYRPTO_pop_info() until the stack is empty.
Also updated memory leak detection code to be multi-thread-safe.
[Richard Levitte]
*) Add options -text and -noout to pkcs7 utility and delete the
encryption options which never did anything. Update docs.
[Steve Henson]
*) Add options to some of the utilities to allow the pass phrase
to be included on either the command line (not recommended on
OSes like Unix) or read from the environment. Update the
manpages and fix a few bugs.
[Steve Henson]
*) Add a few manpages for some of the openssl commands.
[Steve Henson]
*) Fix the -revoke option in ca. It was freeing up memory twice,
leaking and not finding already revoked certificates.
[Steve Henson]
*) Extensive changes to support certificate auxiliary information.
This involves the use of X509_CERT_AUX structure and X509_AUX
functions. An X509_AUX function such as PEM_read_X509_AUX()
can still read in a certificate file in the usual way but it
will also read in any additional "auxiliary information". By
doing things this way a fair degree of compatibility can be
retained: existing certificates can have this information added
using the new 'x509' options.
Current auxiliary information includes an "alias" and some trust
settings. The trust settings will ultimately be used in enhanced
certificate chain verification routines: currently a certificate
can only be trusted if it is self signed and then it is trusted
for all purposes.
[Steve Henson]
*) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD).
The problem was that one of the replacement routines had not been working
since SSLeay releases. For now the offending routine has been replaced
with non-optimised assembler. Even so, this now gives around 95%
performance improvement for 1024 bit RSA signs.
[Mark Cox]
*) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
handling. Most clients have the effective key size in bits equal to
the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
A few however don't do this and instead use the size of the decrypted key
to determine the RC2 key length and the AlgorithmIdentifier to determine
the effective key length. In this case the effective key length can still
be 40 bits but the key length can be 168 bits for example. This is fixed
by manually forcing an RC2 key into the EVP_PKEY structure because the
EVP code can't currently handle unusual RC2 key sizes: it always assumes
the key length and effective key length are equal.
[Steve Henson]
*) Add a bunch of functions that should simplify the creation of
X509_NAME structures. Now you should be able to do:
X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
and have it automatically work out the correct field type and fill in
the structures. The more adventurous can try:
X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
and it will (hopefully) work out the correct multibyte encoding.
[Steve Henson]
*) Change the 'req' utility to use the new field handling and multibyte
copy routines. Before the DN field creation was handled in an ad hoc
way in req, ca, and x509 which was rather broken and didn't support
BMPStrings or UTF8Strings. Since some software doesn't implement
BMPStrings or UTF8Strings yet, they can be enabled using the config file
using the dirstring_type option. See the new comment in the default
openssl.cnf for more info.
[Steve Henson]
1999-10-26 22:49:12 +08:00
*) Make crypto/rand/md_rand.c more robust:
- Assure unique random numbers after fork().
1999-10-26 22:49:12 +08:00
- Make sure that concurrent threads access the global counter and
md serializably so that we never lose entropy in them
or use exactly the same state in multiple threads.
Access to the large state is not always serializable because
the additional locking could be a performance killer, and
md should be large enough anyway.
[Bodo Moeller]
*) New file apps/app_rand.c with commonly needed functionality
for handling the random seed file.
Use the random seed file in some applications that previously did not:
ca,
dsaparam -genkey (which also ignored its '-rand' option),
s_client,
s_server,
x509 (when signing).
Except on systems with /dev/urandom, it is crucial to have a random
seed file at least for key creation, DSA signing, and for DH exchanges;
1999-10-26 19:19:42 +08:00
for RSA signatures we could do without one.
gendh and gendsa (unlike genrsa) used to read only the first byte
of each file listed in the '-rand' option. The function as previously
found in genrsa is now in app_rand.c and is used by all programs
that support '-rand'.
[Bodo Moeller]
*) In RAND_write_file, use mode 0600 for creating files;
don't just chmod when it may be too late.
[Bodo Moeller]
*) Report an error from X509_STORE_load_locations
when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
[Bill Perry]
*) New function ASN1_mbstring_copy() this copies a string in either
ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
into an ASN1_STRING type. A mask of permissible types is passed
and it chooses the "minimal" type to use or an error if not type
is suitable.
[Steve Henson]
*) Add function equivalents to the various macros in asn1.h. The old
macros are retained with an M_ prefix. Code inside the library can
use the M_ macros. External code (including the openssl utility)
should *NOT* in order to be "shared library friendly".
[Steve Henson]
*) Add various functions that can check a certificate's extensions
to see if it usable for various purposes such as SSL client,
server or S/MIME and CAs of these types. This is currently
VERY EXPERIMENTAL but will ultimately be used for certificate chain
verification. Also added a -purpose flag to x509 utility to
print out all the purposes.
[Steve Henson]
*) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
functions.
[Steve Henson]
*) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
for, obtain and decode and extension and obtain its critical flag.
This allows all the necessary extension code to be handled in a
single function call.
[Steve Henson]
*) RC4 tune-up featuring 30-40% performance improvement on most RISC
platforms. See crypto/rc4/rc4_enc.c for further details.
[Andy Polyakov]
*) New -noout option to asn1parse. This causes no output to be produced
its main use is when combined with -strparse and -out to extract data
from a file (which may not be in ASN.1 format).
[Steve Henson]
*) Fix for pkcs12 program. It was hashing an invalid certificate pointer
when producing the local key id.
[Richard Levitte <levitte@stacken.kth.se>]
*) New option -dhparam in s_server. This allows a DH parameter file to be
stated explicitly. If it is not stated then it tries the first server
certificate file. The previous behaviour hard coded the filename
"server.pem".
[Steve Henson]
*) Add -pubin and -pubout options to the rsa and dsa commands. These allow
a public key to be input or output. For example:
openssl rsa -in key.pem -pubout -out pubkey.pem
Also added necessary DSA public key functions to handle this.
[Steve Henson]
*) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
in the message. This was handled by allowing
X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
[Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
*) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
to the end of the strings whereas this didn't. This would cause problems
if strings read with d2i_ASN1_bytes() were later modified.
[Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
1999-10-02 21:33:06 +08:00
*) Fix for base64 decode bug. When a base64 bio reads only one line of
data and it contains EOF it will end up returning an error. This is
caused by input 46 bytes long. The cause is due to the way base64
BIOs find the start of base64 encoded data. They do this by trying a
trial decode on each line until they find one that works. When they
do a flag is set and it starts again knowing it can pass all the
data directly through the decoder. Unfortunately it doesn't reset
the context it uses. This means that if EOF is reached an attempt
is made to pass two EOFs through the context and this causes the
resulting error. This can also cause other problems as well. As is
usual with these problems it takes *ages* to find and the fix is
trivial: move one line.
[Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
*) Ugly workaround to get s_client and s_server working under Windows. The
old code wouldn't work because it needed to select() on sockets and the
tty (for keypresses and to see if data could be written). Win32 only
supports select() on sockets so we select() with a 1s timeout on the
sockets and then see if any characters are waiting to be read, if none
are present then we retry, we also assume we can always write data to
the tty. This isn't nice because the code then blocks until we've
received a complete line of data and it is effectively polling the
keyboard at 1s intervals: however it's quite a bit better than not
working at all :-) A dedicated Windows application might handle this
with an event loop for example.
[Steve Henson]
*) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
will be called when RSA_sign() and RSA_verify() are used. This is useful
if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
should *not* be used: RSA_sign() and RSA_verify() must be used instead.
This necessitated the support of an extra signature type NID_md5_sha1
for SSL signatures and modifications to the SSL library to use it instead
of calling RSA_public_decrypt() and RSA_private_encrypt().
[Steve Henson]
*) Add new -verify -CAfile and -CApath options to the crl program, these
will lookup a CRL issuers certificate and verify the signature in a
similar way to the verify program. Tidy up the crl program so it
no longer accesses structures directly. Make the ASN1 CRL parsing a bit
less strict. It will now permit CRL extensions even if it is not
a V2 CRL: this will allow it to tolerate some broken CRLs.
[Steve Henson]
*) Initialize all non-automatic variables each time one of the openssl
sub-programs is started (this is necessary as they may be started
multiple times from the "OpenSSL>" prompt).
[Lennart Bang, Bodo Moeller]
*) Preliminary compilation option RSA_NULL which disables RSA crypto without
removing all other RSA functionality (this is what NO_RSA does). This
is so (for example) those in the US can disable those operations covered
by the RSA patent while allowing storage and parsing of RSA keys and RSA
key generation.
[Steve Henson]
*) Non-copying interface to BIO pairs.
(still largely untested)
[Bodo Moeller]
*) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
ASCII string. This was handled independently in various places before.
[Steve Henson]
*) New functions UTF8_getc() and UTF8_putc() that parse and generate
UTF8 strings a character at a time.
[Steve Henson]
*) Use client_version from client hello to select the protocol
(s23_srvr.c) and for RSA client key exchange verification
(s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
[Bodo Moeller]
*) Add various utility functions to handle SPKACs, these were previously
handled by poking round in the structure internals. Added new function
NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
print, verify and generate SPKACs. Based on an original idea from
Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
[Steve Henson]
1999-08-28 21:18:25 +08:00
*) RIPEMD160 is operational on all platforms and is back in 'make test'.
[Andy Polyakov]
*) Allow the config file extension section to be overwritten on the
command line. Based on an original idea from Massimiliano Pala
<madwolf@comune.modena.it>. The new option is called -extensions
and can be applied to ca, req and x509. Also -reqexts to override
the request extensions in req and -crlexts to override the crl extensions
in ca.
[Steve Henson]
*) Add new feature to the SPKAC handling in ca. Now you can include
the same field multiple times by preceding it by "XXXX." for example:
1.OU="Unit name 1"
2.OU="Unit name 2"
this is the same syntax as used in the req config file.
[Steve Henson]
*) Allow certificate extensions to be added to certificate requests. These
are specified in a 'req_extensions' option of the req section of the
config file. They can be printed out with the -text option to req but
are otherwise ignored at present.
[Steve Henson]
1999-09-21 21:33:15 +08:00
*) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
data read consists of only the final block it would not decrypted because
EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
A misplaced 'break' also meant the decrypted final block might not be
copied until the next read.
[Steve Henson]
*) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
a few extra parameters to the DH structure: these will be useful if
for example we want the value of 'q' or implement X9.42 DH.
[Steve Henson]
1999-08-23 01:57:38 +08:00
*) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
provides hooks that allow the default DSA functions or functions on a
"per key" basis to be replaced. This allows hardware acceleration and
hardware key storage to be handled without major modification to the
library. Also added low level modexp hooks and CRYPTO_EX structure and
associated functions.
[Steve Henson]
*) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
as "read only": it can't be written to and the buffer it points to will
not be freed. Reading from a read only BIO is much more efficient than
a normal memory BIO. This was added because there are several times when
an area of memory needs to be read from a BIO. The previous method was
to create a memory BIO and write the data to it, this results in two
copies of the data and an O(n^2) reading algorithm. There is a new
function BIO_new_mem_buf() which creates a read only memory BIO from
an area of memory. Also modified the PKCS#7 routines to use read only
memory BIOs.
[Steve Henson]
*) Bugfix: ssl23_get_client_hello did not work properly when called in
state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
but a retry condition occurred while trying to read the rest.
[Bodo Moeller]
*) The PKCS7_ENC_CONTENT_new() function was setting the content type as
NID_pkcs7_encrypted by default: this was wrong since this should almost
always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
the encrypted data type: this is a more sensible place to put it and it
allows the PKCS#12 code to be tidied up that duplicated this
functionality.
[Steve Henson]
*) Changed obj_dat.pl script so it takes its input and output files on
the command line. This should avoid shell escape redirection problems
under Win32.
[Steve Henson]
*) Initial support for certificate extension requests, these are included
in things like Xenroll certificate requests. Included functions to allow
extensions to be obtained and added.
[Steve Henson]
1999-08-09 21:01:48 +08:00
*) -crlf option to s_client and s_server for sending newlines as
CRLF (as required by many protocols).
[Bodo Moeller]
1999-08-09 06:41:24 +08:00
Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
1999-08-09 06:41:24 +08:00
*) Install libRSAglue.a when OpenSSL is built with RSAref.
[Ralf S. Engelschall]
*) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
[Andrija Antonijevic <TheAntony2@bigfoot.com>]
*) Fix -startdate and -enddate (which was missing) arguments to 'ca'
program.
[Steve Henson]
*) New function DSA_dup_DH, which duplicates DSA parameters/keys as
DH parameters/keys (q is lost during that conversion, but the resulting
DH parameters contain its length).
For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
much faster than DH_generate_parameters (which creates parameters
where p = 2*q + 1), and also the smaller q makes DH computations
much more efficient (160-bit exponentiation instead of 1024-bit
exponentiation); so this provides a convenient way to support DHE
ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
utter importance to use
SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
or
SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
when such DH parameters are used, because otherwise small subgroup
attacks may become possible!
[Bodo Moeller]
*) Avoid memory leak in i2d_DHparams.
[Bodo Moeller]
*) Allow the -k option to be used more than once in the enc program:
this allows the same encrypted message to be read by multiple recipients.
[Steve Henson]
1999-07-28 06:22:58 +08:00
*) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
it will always use the numerical form of the OID, even if it has a short
or long name.
[Steve Henson]
*) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
method only got called if p,q,dmp1,dmq1,iqmp components were present,
otherwise bn_mod_exp was called. In the case of hardware keys for example
no private key components need be present and it might store extra data
1999-09-21 21:33:15 +08:00
in the RSA structure, which cannot be accessed from bn_mod_exp.
By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
private key operations.
[Steve Henson]
1999-07-25 23:13:49 +08:00
*) Added support for SPARC Linux.
[Andy Polyakov]
*) pem_password_cb function type incompatibly changed from
typedef int pem_password_cb(char *buf, int size, int rwflag);
to
....(char *buf, int size, int rwflag, void *userdata);
so that applications can pass data to their callbacks:
The PEM[_ASN1]_{read,write}... functions and macros now take an
additional void * argument, which is just handed through whenever
the password callback is called.
1999-09-21 21:33:15 +08:00
[Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
New function SSL_CTX_set_default_passwd_cb_userdata.
Compatibility note: As many C implementations push function arguments
onto the stack in reverse order, the new library version is likely to
interoperate with programs that have been compiled with the old
pem_password_cb definition (PEM_whatever takes some data that
happens to be on the stack as its last argument, and the callback
just ignores this garbage); but there is no guarantee whatsoever that
this will work.
1999-05-31 07:54:52 +08:00
*) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
(both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
problems not only on Windows, but also on some Unix platforms.
To avoid problematic command lines, these definitions are now in an
auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
[Bodo Moeller]
*) MIPS III/IV assembler module is reimplemented.
[Andy Polyakov]
1999-07-16 08:50:45 +08:00
*) More DES library cleanups: remove references to srand/rand and
delete an unused file.
[Ulf Möller]
1999-07-16 08:50:45 +08:00
*) Add support for the the free Netwide assembler (NASM) under Win32,
since not many people have MASM (ml) and it can be hard to obtain.
This is currently experimental but it seems to work OK and pass all
the tests. Check out INSTALL.W32 for info.
[Steve Henson]
1999-07-13 01:15:42 +08:00
*) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
without temporary keys kept an extra copy of the server key,
and connections with temporary keys did not free everything in case
of an error.
[Bodo Moeller]
*) New function RSA_check_key and new openssl rsa option -check
for verifying the consistency of RSA keys.
[Ulf Moeller, Bodo Moeller]
*) Various changes to make Win32 compile work:
1. Casts to avoid "loss of data" warnings in p5_crpt2.c
2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
comparison" warnings.
3. Add sk_<TYPE>_sort to DEF file generator and do make update.
[Steve Henson]
*) Add a debugging option to PKCS#5 v2 key generation function: when
you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
derived keys are printed to stderr.
[Steve Henson]
1999-07-11 20:30:55 +08:00
*) Copy the flags in ASN1_STRING_dup().
[Roman E. Pavlov <pre@mo.msk.ru>]
*) The x509 application mishandled signing requests containing DSA
keys when the signing key was also DSA and the parameters didn't match.
It was supposed to omit the parameters when they matched the signing key:
the verifying software was then supposed to automatically use the CA's
parameters if they were absent from the end user certificate.
Omitting parameters is no longer recommended. The test was also
the wrong way round! This was probably due to unusual behaviour in
EVP_cmp_parameters() which returns 1 if the parameters match.
This meant that parameters were omitted when they *didn't* match and
the certificate was useless. Certificates signed with 'ca' didn't have
this bug.
[Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
*) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
The interface is as follows:
1999-07-10 00:27:30 +08:00
Applications can use
CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
"off" is now the default.
The library internally uses
CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
to disable memory-checking temporarily.
Some inconsistent states that previously were possible (and were
even the default) are now avoided.
-DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
with each memory chunk allocated; this is occasionally more helpful
than just having a counter.
-DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
-DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
extensions.
1999-07-10 00:27:30 +08:00
[Bodo Moeller]
*) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
which largely parallels "options", but is for changing API behaviour,
whereas "options" are about protocol behaviour.
Initial "mode" flags are:
SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
a single record has been written.
SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
retries use the same buffer location.
(But all of the contents must be
copied!)
[Bodo Moeller]
*) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
worked.
1999-06-30 08:42:56 +08:00
*) Fix problems with no-hmac etc.
[Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
1999-06-30 08:42:56 +08:00
*) New functions RSA_get_default_method(), RSA_set_method() and
RSA_get_method(). These allows replacement of RSA_METHODs without having
to mess around with the internals of an RSA structure.
[Steve Henson]
1999-06-25 22:04:10 +08:00
*) Fix memory leaks in DSA_do_sign and DSA_is_prime.
Also really enable memory leak checks in openssl.c and in some
test programs.
[Chad C. Mulligan, Bodo Moeller]
*) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
up the length of negative integers. This has now been simplified to just
store the length when it is first determined and use it later, rather
than trying to keep track of where data is copied and updating it to
point to the end.
[Steve Henson, reported by Brien Wheeler
<bwheeler@authentica-security.com>]
*) Add a new function PKCS7_signatureVerify. This allows the verification
of a PKCS#7 signature but with the signing certificate passed to the
function itself. This contrasts with PKCS7_dataVerify which assumes the
certificate is present in the PKCS#7 structure. This isn't always the
case: certificates can be omitted from a PKCS#7 structure and be
distributed by "out of band" means (such as a certificate database).
[Steve Henson]
*) Complete the PEM_* macros with DECLARE_PEM versions to replace the
function prototypes in pem.h, also change util/mkdef.pl to add the
necessary function names.
[Steve Henson]
*) mk1mf.pl (used by Windows builds) did not properly read the
1999-07-09 20:01:40 +08:00
options set by Configure in the top level Makefile, and Configure
1999-07-09 21:02:14 +08:00
was not even able to write more than one option correctly.
1999-07-09 20:01:40 +08:00
Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
[Bodo Moeller]
*) New functions CONF_load_bio() and CONF_load_fp() to allow a config
file to be loaded from a BIO or FILE pointer. The BIO version will
for example allow memory BIOs to contain config info.
[Steve Henson]
1999-06-19 00:14:18 +08:00
*) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
Whoever hopes to achieve shared-library compatibility across versions
must use this, not the compile-time macro.
1999-06-19 02:22:38 +08:00
(Exercise 0.9.4: Which is the minimum library version required by
such programs?)
Note: All this applies only to multi-threaded programs, others don't
need locks.
1999-06-19 00:14:18 +08:00
[Bodo Moeller]
1999-06-12 09:03:40 +08:00
*) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
through a BIO pair triggered the default case, i.e.
SSLerr(...,SSL_R_UNKNOWN_STATE).
[Bodo Moeller]
*) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
can use the SSL library even if none of the specific BIOs is
appropriate.
[Bodo Moeller]
*) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
for the encoded length.
[Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
*) Add initial documentation of the X509V3 functions.
[Steve Henson]
*) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
PEM_write_bio_PKCS8PrivateKey() that are equivalent to
PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
secure PKCS#8 private key format with a high iteration count.
[Steve Henson]
*) Fix determination of Perl interpreter: A perl or perl5
_directory_ in $PATH was also accepted as the interpreter.
[Ralf S. Engelschall]
*) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
wrong with it but it was very old and did things like calling
PEM_ASN1_read() directly and used MD5 for the hash not to mention some
unusual formatting.
[Steve Henson]
*) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
to use the new extension code.
[Steve Henson]
*) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
with macros. This should make it easier to change their form, add extra
arguments etc. Fix a few PEM prototypes which didn't have cipher as a
constant.
[Steve Henson]
1999-06-09 21:29:51 +08:00
*) Add to configuration table a new entry that can specify an alternative
name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
according to Mark Crispin <MRC@Panda.COM>.
[Bodo Moeller]
1999-06-09 21:41:51 +08:00
#if 0
*) DES CBC did not update the IV. Weird.
[Ben Laurie]
1999-06-09 21:41:51 +08:00
#else
des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
Changing the behaviour of the former might break existing programs --
where IV updating is needed, des_ncbc_encrypt can be used.
1999-06-09 21:41:51 +08:00
#endif
*) When bntest is run from "make test" it drives bc to check its
calculations, as well as internally checking them. If an internal check
fails, it needs to cause bc to give a non-zero result or make test carries
on without noticing the failure. Fixed.
[Ben Laurie]
*) DES library cleanups.
[Ulf Möller]
*) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
ciphers. NOTE: although the key derivation function has been verified
against some published test vectors it has not been extensively tested
yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
of v2.0.
[Steve Henson]
1999-06-07 21:34:25 +08:00
*) Instead of "mkdir -p", which is not fully portable, use new
Perl script "util/mkdir-p.pl".
1999-06-09 21:29:51 +08:00
[Bodo Moeller]
1999-06-07 21:34:25 +08:00
*) Rewrite the way password based encryption (PBE) is handled. It used to
assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
the 'parameter' field of the AlgorithmIdentifier is passed to the
underlying key generation function so it must do its own ASN1 parsing.
This has also changed the EVP_PBE_CipherInit() function which now has a
'parameter' argument instead of literal salt and iteration count values
and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
[Steve Henson]
*) Support for PKCS#5 v1.5 compatible password based encryption algorithms
and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
KEY" because this clashed with PKCS#8 unencrypted string. Since this
value was just used as a "magic string" and not used directly its
value doesn't matter.
[Steve Henson]
*) Introduce some semblance of const correctness to BN. Shame C doesn't
support mutable.
[Ben Laurie]
1999-06-07 08:26:20 +08:00
*) "linux-sparc64" configuration (ultrapenguin).
[Ray Miller <ray.miller@oucs.ox.ac.uk>]
1999-06-07 08:26:20 +08:00
"linux-sparc" configuration.
[Christian Forster <fo@hawo.stw.uni-erlangen.de>]
*) config now generates no-xxx options for missing ciphers.
[Ulf Möller]
*) Support the EBCDIC character set (work in progress).
File ebcdic.c not yet included because it has a different license.
[Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
*) Support BS2000/OSD-POSIX.
[Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
1999-06-04 02:04:04 +08:00
*) Make callbacks for key generation use void * instead of char *.
[Ben Laurie]
1999-06-04 00:07:37 +08:00
*) Make S/MIME samples compile (not yet tested).
[Ben Laurie]
1999-06-01 05:58:18 +08:00
*) Additional typesafe stacks.
[Ben Laurie]
*) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
1999-05-31 07:54:52 +08:00
[Bodo Moeller]
1999-06-01 05:58:18 +08:00
1999-05-29 22:13:15 +08:00
Changes between 0.9.3 and 0.9.3a [29 May 1999]
*) New configuration variant "sco5-gcc".
*) Updated some demos.
[Sean O Riordain, Wade Scholine]
1999-05-28 04:55:18 +08:00
*) Add missing BIO_free at exit of pkcs12 application.
[Wu Zhigang]
*) Fix memory leak in conf.c.
[Steve Henson]
*) Updates for Win32 to assembler version of MD5.
[Steve Henson]
*) Set #! path to perl in apps/der_chop to where we found it
instead of using a fixed path.
[Bodo Moeller]
*) SHA library changes for irix64-mips4-cc.
[Andy Polyakov]
*) Improvements for VMS support.
[Richard Levitte]
1999-06-01 05:58:18 +08:00
1999-05-25 06:38:23 +08:00
Changes between 0.9.2b and 0.9.3 [24 May 1999]
*) Bignum library bug fix. IRIX 6 passes "make test" now!
This also avoids the problems with SC4.2 and unpatched SC5.
[Andy Polyakov <appro@fy.chalmers.se>]
*) New functions sk_num, sk_value and sk_set to replace the previous macros.
These are required because of the typesafe stack would otherwise break
existing code. If old code used a structure member which used to be STACK
and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
sk_num or sk_value it would produce an error because the num, data members
are not present in STACK_OF. Now it just produces a warning. sk_set
replaces the old method of assigning a value to sk_value
(e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
that does this will no longer work (and should use sk_set instead) but
this could be regarded as a "questionable" behaviour anyway.
[Steve Henson]
*) Fix most of the other PKCS#7 bugs. The "experimental" code can now
correctly handle encrypted S/MIME data.
[Steve Henson]
1999-05-16 20:29:28 +08:00
*) Change type of various DES function arguments from des_cblock
1999-05-16 22:20:17 +08:00
(which means, in function argument declarations, pointer to char)
1999-05-16 20:29:28 +08:00
to des_cblock * (meaning pointer to array with 8 char elements),
which allows the compiler to do more typechecking; it was like
1999-05-16 20:29:28 +08:00
that back in SSLeay, but with lots of ugly casts.
Introduce new type const_des_cblock.
[Bodo Moeller]
*) Reorganise the PKCS#7 library and get rid of some of the more obvious
problems: find RecipientInfo structure that matches recipient certificate
and initialise the ASN1 structures properly based on passed cipher.
[Steve Henson]
1999-05-15 23:59:28 +08:00
*) Belatedly make the BN tests actually check the results.
[Ben Laurie]
*) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
to and from BNs: it was completely broken. New compilation option
NEG_PUBKEY_BUG to allow for some broken certificates that encode public
key elements as negative integers.
[Steve Henson]
*) Reorganize and speed up MD5.
[Andy Polyakov <appro@fy.chalmers.se>]
*) VMS support.
[Richard Levitte <richard@levitte.org>]
*) New option -out to asn1parse to allow the parsed structure to be
output to a file. This is most useful when combined with the -strparse
option to examine the output of things like OCTET STRINGS.
[Steve Henson]
*) Make SSL library a little more fool-proof by not requiring any longer
that SSL_set_{accept,connect}_state be called before
SSL_{accept,connect} may be used (SSL_set_..._state is omitted
in many applications because usually everything *appeared* to work as
intended anyway -- now it really works as intended).
[Bodo Moeller]
1999-05-11 07:59:28 +08:00
*) Move openssl.cnf out of lib/.
[Ulf Möller]
1999-05-11 07:59:28 +08:00
*) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
-Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
-Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
[Ralf S. Engelschall]
*) Various fixes to the EVP and PKCS#7 code. It may now be able to
handle PKCS#7 enveloped data properly.
[Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
*) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
copying pointers. The cert_st handling is changed by this in
various ways (and thus what used to be known as ctx->default_cert
is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
any longer when s->cert does not give us what we need).
ssl_cert_instantiate becomes obsolete by this change.
As soon as we've got the new code right (possibly it already is?),
we have solved a couple of bugs of the earlier code where s->cert
was used as if it could not have been shared with other SSL structures.
Note that using the SSL API in certain dirty ways now will result
in different behaviour than observed with earlier library versions:
Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
does not influence s as it used to.
In order to clean up things more thoroughly, inside SSL_SESSION
we don't use CERT any longer, but a new structure SESS_CERT
that holds per-session data (if available); currently, this is
the peer's certificate chain and, for clients, the server's certificate
and temporary key. CERT holds only those values that can have
meaningful defaults in an SSL_CTX.
[Bodo Moeller]
*) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
from the internal representation. Various PKCS#7 fixes: remove some
evil casts and set the enc_dig_alg field properly based on the signing
key type.
[Steve Henson]
*) Allow PKCS#12 password to be set from the command line or the
environment. Let 'ca' get its config file name from the environment
variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
and 'x509').
[Steve Henson]
*) Allow certificate policies extension to use an IA5STRING for the
organization field. This is contrary to the PKIX definition but
VeriSign uses it and IE5 only recognises this form. Document 'x509'
extension option.
[Steve Henson]
1999-05-07 23:42:23 +08:00
*) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
without disallowing inline assembler and the like for non-pedantic builds.
[Ben Laurie]
*) Support Borland C++ builder.
[Janez Jere <jj@void.si>, modified by Ulf Möller]
*) Support Mingw32.
[Ulf Möller]
*) SHA-1 cleanups and performance enhancements.
[Andy Polyakov <appro@fy.chalmers.se>]
*) Sparc v8plus assembler for the bignum library.
[Andy Polyakov <appro@fy.chalmers.se>]
*) Accept any -xxx and +xxx compiler options in Configure.
[Ulf Möller]
*) Update HPUX configuration.
[Anonymous]
*) Add missing sk_<type>_unshift() function to safestack.h
[Ralf S. Engelschall]
*) New function SSL_CTX_use_certificate_chain_file that sets the
"extra_cert"s in addition to the certificate. (This makes sense
only for "PEM" format files, as chains as a whole are not
DER-encoded.)
[Bodo Moeller]
*) Support verify_depth from the SSL API.
x509_vfy.c had what can be considered an off-by-one-error:
Its depth (which was not part of the external interface)
was actually counting the number of certificates in a chain;
now it really counts the depth.
[Bodo Moeller]
*) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
instead of X509err, which often resulted in confusing error
messages since the error codes are not globally unique
(e.g. an alleged error in ssl3_accept when a certificate
didn't match the private key).
*) New function SSL_CTX_set_session_id_context that allows to set a default
value (so that you don't need SSL_set_session_id_context for each
connection using the SSL_CTX).
[Bodo Moeller]
1999-04-30 05:56:13 +08:00
*) OAEP decoding bug fix.
[Ulf Möller]
1999-04-30 05:56:13 +08:00
*) Support INSTALL_PREFIX for package builders, as proposed by
David Harris.
[Bodo Moeller]
1999-04-30 00:10:41 +08:00
*) New Configure options "threads" and "no-threads". For systems
where the proper compiler options are known (currently Solaris
and Linux), "threads" is the default.
[Bodo Moeller]
*) New script util/mklink.pl as a faster substitute for util/mklink.sh.
[Bodo Moeller]
*) Install various scripts to $(OPENSSLDIR)/misc, not to
$(INSTALLTOP)/bin -- they shouldn't clutter directories
such as /usr/local/bin.
[Bodo Moeller]
1999-04-29 00:16:31 +08:00
*) "make linux-shared" to build shared libraries.
[Niels Poppe <niels@netbox.org>]
1999-04-29 00:16:31 +08:00
*) New Configure option no-<cipher> (rsa, idea, rc5, ...).
[Ulf Möller]
*) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
extension adding in x509 utility.
[Steve Henson]
*) Remove NOPROTO sections and error code comments.
[Ulf Möller]
*) Partial rewrite of the DEF file generator to now parse the ANSI
prototypes.
[Steve Henson]
*) New Configure options --prefix=DIR and --openssldir=DIR.
[Ulf Möller]
*) Complete rewrite of the error code script(s). It is all now handled
by one script at the top level which handles error code gathering,
header rewriting and C source file generation. It should be much better
than the old method: it now uses a modified version of Ulf's parser to
read the ANSI prototypes in all header files (thus the old K&R definitions
aren't needed for error creation any more) and do a better job of
translating function codes into names. The old 'ASN1 error code imbedded
in a comment' is no longer necessary and it doesn't use .err files which
have now been deleted. Also the error code call doesn't have to appear all
on one line (which resulted in some large lines...).
[Steve Henson]
1999-04-24 06:38:22 +08:00
*) Change #include filenames from <foo.h> to <openssl/foo.h>.
1999-04-24 06:20:21 +08:00
[Bodo Moeller]
*) Change behaviour of ssl2_read when facing length-0 packets: Don't return
0 (which usually indicates a closed connection), but continue reading.
[Bodo Moeller]
1999-04-22 21:38:03 +08:00
*) Fix some race conditions.
[Bodo Moeller]
*) Add support for CRL distribution points extension. Add Certificate
Policies and CRL distribution points documentation.
[Steve Henson]
*) Move the autogenerated header file parts to crypto/opensslconf.h.
[Ulf Möller]
1999-04-21 21:24:58 +08:00
*) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
8 of keying material. Merlin has also confirmed interop with this fix
between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
[Merlin Hughes <merlin@baltimore.ie>]
*) Fix lots of warnings.
[Richard Levitte <levitte@stacken.kth.se>]
*) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
the directory spec didn't end with a LIST_SEPARATOR_CHAR.
1999-04-21 21:24:58 +08:00
[Richard Levitte <levitte@stacken.kth.se>]
*) Fix problems with sizeof(long) == 8.
[Andy Polyakov <appro@fy.chalmers.se>]
1999-04-20 05:31:43 +08:00
*) Change functions to ANSI C.
[Ulf Möller]
1999-04-20 05:31:43 +08:00
1999-04-19 22:45:02 +08:00
*) Fix typos in error codes.
[Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
1999-04-19 22:45:02 +08:00
*) Remove defunct assembler files from Configure.
[Ulf Möller]
*) SPARC v8 assembler BIGNUM implementation.
[Andy Polyakov <appro@fy.chalmers.se>]
*) Support for Certificate Policies extension: both print and set.
Various additions to support the r2i method this uses.
[Steve Henson]
1999-04-18 05:25:43 +08:00
*) A lot of constification, and fix a bug in X509_NAME_oneline() that could
return a const string when you are expecting an allocated buffer.
[Ben Laurie]
*) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
types DirectoryString and DisplayText.
[Steve Henson]
*) Add code to allow r2i extensions to access the configuration database,
add an LHASH database driver and add several ctx helper functions.
[Steve Henson]
*) Fix an evil bug in bn_expand2() which caused various BN functions to
fail when they extended the size of a BIGNUM.
[Steve Henson]
*) Various utility functions to handle SXNet extension. Modify mkdef.pl to
support typesafe stack.
[Steve Henson]
1999-04-14 19:13:47 +08:00
*) Fix typo in SSL_[gs]et_options().
[Nils Frostberg <nils@medcom.se>]
*) Delete various functions and files that belonged to the (now obsolete)
old X509V3 handling code.
[Steve Henson]
1999-04-13 08:58:49 +08:00
*) New Configure option "rsaref".
[Ulf Möller]
1999-04-13 08:58:49 +08:00
*) Don't auto-generate pem.h.
[Bodo Moeller]
1999-04-13 01:23:57 +08:00
*) Introduce type-safe ASN.1 SETs.
[Ben Laurie]
*) Convert various additional casted stacks to type-safe STACK_OF() variants.
1999-05-07 17:18:25 +08:00
[Ben Laurie, Ralf S. Engelschall, Steve Henson]
1999-04-13 01:23:57 +08:00
*) Introduce type-safe STACKs. This will almost certainly break lots of code
that links with OpenSSL (well at least cause lots of warnings), but fear
not: the conversion is trivial, and it eliminates loads of evil casts. A
few STACKed things have been converted already. Feel free to convert more.
In the fullness of time, I'll do away with the STACK type altogether.
[Ben Laurie]
*) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
specified in <certfile> by updating the entry in the index.txt file.
This way one no longer has to edit the index.txt file manually for
revoking a certificate. The -revoke option does the gory details now.
[Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
*) Fix `openssl crl -noout -text' combination where `-noout' killed the
`-text' option at all and this way the `-noout -text' combination was
inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
[Ralf S. Engelschall]
*) Make sure a corresponding plain text error message exists for the
X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
verify callback function determined that a certificate was revoked.
[Ralf S. Engelschall]
1999-04-11 10:49:35 +08:00
*) Bugfix: In test/testenc, don't test "openssl <cipher>" for
ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
all available cipers including rc5, which was forgotten until now.
In order to let the testing shell script know which algorithms
are available, a new (up to now undocumented) command
"openssl list-cipher-commands" is used.
[Bodo Moeller]
*) Bugfix: s_client occasionally would sleep in select() when
it should have checked SSL_pending() first.
[Bodo Moeller]
1999-04-10 01:04:32 +08:00
*) New functions DSA_do_sign and DSA_do_verify to provide access to
the raw DSA values prior to ASN.1 encoding.
[Ulf Möller]
1999-04-10 01:04:32 +08:00
*) Tweaks to Configure
1999-06-01 05:58:18 +08:00
[Niels Poppe <niels@netbox.org>]
1999-04-10 01:04:32 +08:00
1999-04-09 07:55:42 +08:00
*) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
yet...
[Steve Henson]
*) New variables $(RANLIB) and $(PERL) in the Makefiles.
[Ulf Möller]
1999-03-31 20:38:27 +08:00
*) New config option to avoid instructions that are illegal on the 80386.
The default code is faster, but requires at least a 486.
[Ulf Möller]
1999-03-31 20:38:27 +08:00
*) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
SSL2_SERVER_VERSION (not used at all) macros, which are now the
same as SSL2_VERSION anyway.
[Bodo Moeller]
*) New "-showcerts" option for s_client.
[Bodo Moeller]
*) Still more PKCS#12 integration. Add pkcs12 application to openssl
application. Various cleanups and fixes.
[Steve Henson]
*) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
modify error routines to work internally. Add error codes and PBE init
to library startup routines.
[Steve Henson]
*) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
packing functions to asn1 and evp. Changed function names and error
codes along the way.
[Steve Henson]
*) PKCS12 integration: and so it begins... First of several patches to
slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
objects to objects.h
[Steve Henson]
*) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
and display support for Thawte strong extranet extension.
[Steve Henson]
1999-03-27 21:03:37 +08:00
*) Add LinuxPPC support.
[Jeff Dubrule <igor@pobox.org>]
*) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
bn_div_words in alpha.s.
[Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
*) Make sure the RSA OAEP test is skipped under -DRSAref because
OAEP isn't supported when OpenSSL is built with RSAref.
[Ulf Moeller <ulf@fitug.de>]
*) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
so they no longer are missing under -DNOPROTO.
[Soren S. Jorvang <soren@t.dk>]
Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
1999-02-28 20:41:50 +08:00
1999-03-22 20:22:14 +08:00
*) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
doesn't work when the session is reused. Coming soon!
[Ben Laurie]
*) Fix a security hole, that allows sessions to be reused in the wrong
context thus bypassing client cert protection! All software that uses
client certs and session caches in multiple contexts NEEDS PATCHING to
allow session reuse! A fuller solution is in the works.
[Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
*) Some more source tree cleanups (removed obsolete files
crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
permission on "config" script to be executable) and a fix for the INSTALL
document.
[Ulf Moeller <ulf@fitug.de>]
*) Remove some legacy and erroneous uses of malloc, free instead of
Malloc, Free.
[Lennart Bang <lob@netstream.se>, with minor changes by Steve]
1999-03-13 04:41:09 +08:00
*) Make rsa_oaep_test return non-zero on error.
[Ulf Moeller <ulf@fitug.de>]
1999-03-13 04:26:27 +08:00
*) Add support for native Solaris shared libraries. Configure
solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
if someone would make that last step automatic.
[Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
1999-03-13 03:58:43 +08:00
*) ctx_size was not built with the right compiler during "make links". Fixed.
[Ben Laurie]
*) Change the meaning of 'ALL' in the cipher list. It now means "everything
except NULL ciphers". This means the default cipher list will no longer
enable NULL ciphers. They need to be specifically enabled e.g. with
the string "DEFAULT:eNULL".
[Steve Henson]
*) Fix to RSA private encryption routines: if p < q then it would
occasionally produce an invalid result. This will only happen with
externally generated keys because OpenSSL (and SSLeay) ensure p > q.
[Steve Henson]
*) Be less restrictive and allow also `perl util/perlpath.pl
/path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
because this way one can also use an interpreter named `perl5' (which is
usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
installed as `perl').
[Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
*) Let util/clean-depend.pl work also with older Perl 5.00x versions.
[Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
*) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
advapi32.lib to Win32 build and change the pem test comparison
to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
and crypto/des/ede_cbcm_enc.c.
[Steve Henson]
1999-03-09 19:37:23 +08:00
*) DES quad checksum was broken on big-endian architectures. Fixed.
[Ben Laurie]
*) Comment out two functions in bio.h that aren't implemented. Fix up the
Win32 test batch file so it (might) work again. The Win32 test batch file
is horrible: I feel ill....
[Steve Henson]
*) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
in e_os.h. Audit of header files to check ANSI and non ANSI
sections: 10 functions were absent from non ANSI section and not exported
from Windows DLLs. Fixed up libeay.num for new functions.
[Steve Henson]
*) Make `openssl version' output lines consistent.
[Ralf S. Engelschall]
*) Fix Win32 symbol export lists for BIO functions: Added
BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
to ms/libeay{16,32}.def.
[Ralf S. Engelschall]
*) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
fine under Unix and passes some trivial tests I've now added. But the
whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
added to make sure no one expects that this stuff really works in the
OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
openssl_bio.xs.
[Ralf S. Engelschall]
1999-03-07 23:08:38 +08:00
*) Fix the generation of two part addresses in perl.
[Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
1999-03-07 22:17:32 +08:00
*) Add config entry for Linux on MIPS.
[John Tobey <jtobey@channel1.com>]
1999-03-07 23:21:08 +08:00
*) Make links whenever Configure is run, unless we are on Windoze.
1999-03-07 22:05:36 +08:00
[Ben Laurie]
*) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
Currently only issuerAltName and AuthorityKeyIdentifier make any sense
in CRLs.
[Steve Henson]
*) Add a useful kludge to allow package maintainers to specify compiler and
other platforms details on the command line without having to patch the
Configure script everytime: One now can use ``perl Configure
<id>:<details>'', i.e. platform ids are allowed to have details appended
to them (separated by colons). This is treated as there would be a static
pre-configured entry in Configure's %table under key <id> with value
<details> and ``perl Configure <id>'' is called. So, when you want to
perform a quick test-compile under FreeBSD 3.1 with pgcc and without
assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
now, which overrides the FreeBSD-elf entry on-the-fly.
[Ralf S. Engelschall]
1999-03-06 23:21:02 +08:00
*) Disable new TLS1 ciphersuites by default: they aren't official yet.
[Ben Laurie]
*) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
on the `perl Configure ...' command line. This way one can compile
OpenSSL libraries with Position Independent Code (PIC) which is needed
for linking it into DSOs.
[Ralf S. Engelschall]
1999-03-06 22:09:36 +08:00
*) Remarkably, export ciphers were totally broken and no-one had noticed!
Fixed.
[Ben Laurie]
*) Cleaned up the LICENSE document: The official contact for any license
questions now is the OpenSSL core team under openssl-core@openssl.org.
And add a paragraph about the dual-license situation to make sure people
recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
to the OpenSSL toolkit.
[Ralf S. Engelschall]
*) General source tree makefile cleanups: Made `making xxx in yyy...'
display consistent in the source tree and replaced `/bin/rm' by `rm'.
Additionally cleaned up the `make links' target: Remove unnecessary
semicolons, subsequent redundant removes, inline point.sh into mklink.sh
to speed processing and no longer clutter the display with confusing
stuff. Instead only the actually done links are displayed.
[Ralf S. Engelschall]
1999-03-06 20:09:36 +08:00
*) Permit null encryption ciphersuites, used for authentication only. It used
to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
encryption.
[Ben Laurie]
*) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
signed attributes when verifying signatures (this would break them),
the detached data encoding was wrong and public keys obtained using
X509_get_pubkey() weren't freed.
[Steve Henson]
*) Add text documentation for the BUFFER functions. Also added a work around
to a Win95 console bug. This was triggered by the password read stuff: the
last character typed gets carried over to the next fread(). If you were
generating a new cert request using 'req' for example then the last
character of the passphrase would be CR which would then enter the first
field as blank.
[Steve Henson]
*) Added the new `Includes OpenSSL Cryptography Software' button as
doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
button and can be used by applications based on OpenSSL to show the
relationship to the OpenSSL project.
[Ralf S. Engelschall]
*) Remove confusing variables in function signatures in files
ssl/ssl_lib.c and ssl/ssl.h.
[Lennart Bong <lob@kulthea.stacken.kth.se>]
*) Don't install bss_file.c under PREFIX/include/
[Lennart Bong <lob@kulthea.stacken.kth.se>]
*) Get the Win32 compile working again. Modify mkdef.pl so it can handle
functions that return function pointers and has support for NT specific
stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
#ifdef WIN32 and WINNTs sprinkled about the place and some changes from
unsigned to signed types: this was killing the Win32 compile.
[Steve Henson]
*) Add new certificate file to stack functions,
SSL_add_dir_cert_subjects_to_stack() and
SSL_add_file_cert_subjects_to_stack(). These largely supplant
SSL_load_client_CA_file(), and can be used to add multiple certs easily
to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
This means that Apache-SSL and similar packages don't have to mess around
to add as many CAs as they want to the preferred list.
[Ben Laurie]
1999-02-28 20:41:50 +08:00
*) Experiment with doxygen documentation. Currently only partially applied to
ssl/ssl_lib.c.
See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
openssl.doxy as the configuration file.
[Ben Laurie]
*) Get rid of remaining C++-style comments which strict C compilers hate.
[Ralf S. Engelschall, pointed out by Carlos Amengual]
*) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
compiled in by default: it has problems with large keys.
[Steve Henson]
*) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
DH private keys and/or callback functions which directly correspond to
their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
is needed for applications which have to configure certificates on a
per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
(e.g. s_server).
For the RSA certificate situation is makes no difference, but
for the DSA certificate situation this fixes the "no shared cipher"
problem where the OpenSSL cipher selection procedure failed because the
temporary keys were not overtaken from the context and the API provided
no way to reconfigure them.
The new functions now let applications reconfigure the stuff and they
are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
non-public-API function ssl_cert_instantiate() is used as a helper
function and also to reduce code redundancy inside ssl_rsa.c.
[Ralf S. Engelschall]
*) Move s_server -dcert and -dkey options out of the undocumented feature
area because they are useful for the DSA situation and should be
recognized by the users.
[Ralf S. Engelschall]
*) Fix the cipher decision scheme for export ciphers: the export bits are
*not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
SSL_EXP_MASK. So, the original variable has to be used instead of the
already masked variable.
[Richard Levitte <levitte@stacken.kth.se>]
*) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
[Richard Levitte <levitte@stacken.kth.se>]
*) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
from `int' to `unsigned int' because it's a length and initialized by
EVP_DigestFinal() which expects an `unsigned int *'.
[Richard Levitte <levitte@stacken.kth.se>]
*) Don't hard-code path to Perl interpreter on shebang line of Configure
script. Instead use the usual Shell->Perl transition trick.
[Ralf S. Engelschall]
*) Make `openssl x509 -noout -modulus' functional also for DSA certificates
(in addition to RSA certificates) to match the behaviour of `openssl dsa
-noout -modulus' as it's already the case for `openssl rsa -noout
-modulus'. For RSA the -modulus is the real "modulus" while for DSA
currently the public key is printed (a decision which was already done by
`openssl dsa -modulus' in the past) which serves a similar purpose.
Additionally the NO_RSA no longer completely removes the whole -modulus
option; it now only avoids using the RSA stuff. Same applies to NO_DSA
now, too.
[Ralf S. Engelschall]
1999-02-24 05:44:34 +08:00
*) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
BIO. See the source (crypto/evp/bio_ok.c) for more info.
[Arne Ansper <arne@ats.cyber.ee>]
*) Dump the old yucky req code that tried (and failed) to allow raw OIDs
to be added. Now both 'req' and 'ca' can use new objects defined in the
config file.
[Steve Henson]
1999-02-23 05:21:08 +08:00
*) Add cool BIO that does syslog (or event log on NT).
[Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
*) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
[Ben Laurie]
*) Add preliminary config info for new extension code.
[Steve Henson]
*) Make RSA_NO_PADDING really use no padding.
[Ulf Moeller <ulf@fitug.de>]
*) Generate errors when private/public key check is done.
[Ben Laurie]
*) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
for some CRL extensions and new objects added.
[Steve Henson]
*) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
key usage extension and fuller support for authority key id.
[Steve Henson]
1999-02-18 05:11:08 +08:00
*) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
padding method for RSA, which is recommended for new applications in PKCS
#1 v2.0 (RFC 2437, October 1998).
OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
against Bleichbacher's attack on RSA.
[Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
Ben Laurie]
*) Updates to the new SSL compression code
[Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
*) Fix so that the version number in the master secret, when passed
via RSA, checks that if TLS was proposed, but we roll back to SSLv3
(because the server will not accept higher), that the version number
is 0x03,0x01, not 0x03,0x00
[Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
*) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
[Steve Henson]
*) Support for RAW extensions where an arbitrary extension can be
created by including its DER encoding. See apps/openssl.cnf for
an example.
[Steve Henson]
*) Make sure latest Perl versions don't interpret some generated C array
code as Perl array code in the crypto/err/err_genc.pl script.
[Lars Weber <3weber@informatik.uni-hamburg.de>]
*) Modify ms/do_ms.bat to not generate assembly language makefiles since
not many people have the assembler. Various Win32 compilation fixes and
update to the INSTALL.W32 file with (hopefully) more accurate Win32
build instructions.
[Steve Henson]
*) Modify configure script 'Configure' to automatically create crypto/date.h
file under Win32 and also build pem.h from pem.org. New script
util/mkfiles.pl to create the MINFO file on environments that can't do a
'make files': perl util/mkfiles.pl >MINFO should work.
[Steve Henson]
*) Major rework of DES function declarations, in the pursuit of correctness
and purity. As a result, many evil casts evaporated, and some weirdness,
too. You may find this causes warnings in your code. Zapping your evil
casts will probably fix them. Mostly.
[Ben Laurie]
*) Fix for a typo in asn1.h. Bug fix to object creation script
obj_dat.pl. It considered a zero in an object definition to mean
"end of object": none of the objects in objects.h have any zeros
so it wasn't spotted.
[Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
1999-02-13 23:03:47 +08:00
*) Add support for Triple DES Cipher Block Chaining with Output Feedback
Masking (CBCM). In the absence of test vectors, the best I have been able
to do is check that the decrypt undoes the encrypt, so far. Send me test
vectors if you have them.
[Ben Laurie]
1999-03-06 22:01:29 +08:00
*) Correct calculation of key length for export ciphers (too much space was
allocated for null ciphers). This has not been tested!
[Ben Laurie]
*) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
message is now correct (it understands "crypto" and "ssl" on its
command line). There is also now an "update" option. This will update
the util/ssleay.num and util/libeay.num files with any new functions.
If you do a:
perl util/mkdef.pl crypto ssl update
it will update them.
[Steve Henson]
*) Overhauled the Perl interface (perl/*):
- ported BN stuff to OpenSSL's different BN library
- made the perl/ source tree CVS-aware
- renamed the package from SSLeay to OpenSSL (the files still contain
their history because I've copied them in the repository)
- removed obsolete files (the test scripts will be replaced
by better Test::Harness variants in the future)
[Ralf S. Engelschall]
1999-02-10 16:34:01 +08:00
*) First cut for a very conservative source tree cleanup:
1. merge various obsolete readme texts into doc/ssleay.txt
where we collect the old documents and readme texts.
2. remove the first part of files where I'm already sure that we no
longer need them because of three reasons: either they are just temporary
files which were left by Eric or they are preserved original files where
I've verified that the diff is also available in the CVS via "cvs diff
-rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
the crypto/md/ stuff).
[Ralf S. Engelschall]
*) More extension code. Incomplete support for subject and issuer alt
name, issuer and authority key id. Change the i2v function parameters
and add an extra 'crl' parameter in the X509V3_CTX structure: guess
what that's for :-) Fix to ASN1 macro which messed up
IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
[Steve Henson]
*) Preliminary support for ENUMERATED type. This is largely copied from the
INTEGER code.
[Steve Henson]
*) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
[Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
*) Make sure `make rehash' target really finds the `openssl' program.
[Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
*) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
like to hear about it if this slows down other processors.
[Ben Laurie]
*) Add CygWin32 platform information to Configure script.
[Alan Batie <batie@aahz.jf.intel.com>]
*) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
[Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
*) New program nseq to manipulate netscape certificate sequences
[Steve Henson]
1998-12-23 20:09:47 +08:00
*) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
few typos.
[Steve Henson]
*) Fixes to BN code. Previously the default was to define BN_RECURSION
but the BN code had some problems that would cause failures when
doing certificate verification and some other functions.
[Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
*) Add ASN1 and PEM code to support netscape certificate sequences.
[Steve Henson]
*) Add ASN1 and PEM code to support netscape certificate sequences.
[Steve Henson]
1999-01-27 07:13:14 +08:00
*) Add several PKIX and private extended key usage OIDs.
[Steve Henson]
*) Modify the 'ca' program to handle the new extension code. Modify
openssl.cnf for new extension format, add comments.
[Steve Henson]
*) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
and add a sample to openssl.cnf so req -x509 now adds appropriate
CA extensions.
[Steve Henson]
*) Continued X509 V3 changes. Add to other makefiles, integrate with the
error code, add initial support to X509_print() and x509 application.
[Steve Henson]
*) Takes a deep breath and start adding X509 V3 extension support code. Add
files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
stuff is currently isolated and isn't even compiled yet.
[Steve Henson]
*) Continuing patches for GeneralizedTime. Fix up certificate and CRL
ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
Removed the versions check from X509 routines when loading extensions:
this allows certain broken certificates that don't set the version
properly to be processed.
[Steve Henson]
*) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
can still be regenerated with "make depend".
[Ben Laurie]
1999-01-20 03:18:20 +08:00
*) Spelling mistake in C version of CAST-128.
[Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
*) Changes to the error generation code. The perl script err-code.pl
now reads in the old error codes and retains the old numbers, only
adding new ones if necessary. It also only changes the .err files if new
codes are added. The makefiles have been modified to only insert errors
when needed (to avoid needlessly modifying header files). This is done
by only inserting errors if the .err file is newer than the auto generated
C file. To rebuild all the error codes from scratch (the old behaviour)
either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
or delete all the .err files.
[Steve Henson]
*) CAST-128 was incorrectly implemented for short keys. The C version has
been fixed, but is untested. The assembler versions are also fixed, but
new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
to regenerate it if needed.
[Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
Hagino <itojun@kame.net>]
*) File was opened incorrectly in randfile.c.
[Ulf Möller <ulf@fitug.de>]
*) Beginning of support for GeneralizedTime. d2i, i2d, check and print
functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
GeneralizedTime. ASN1_TIME is the proper type used in certificates et
al: it's just almost always a UTCTime. Note this patch adds new error
codes so do a "make errors" if there are problems.
[Steve Henson]
*) Correct Linux 1 recognition in config.
[Ulf Möller <ulf@fitug.de>]
*) Remove pointless MD5 hash when using DSA keys in ca.
[Anonymous <nobody@replay.com>]
*) Generate an error if given an empty string as a cert directory. Also
generate an error if handed NULL (previously returned 0 to indicate an
error, but didn't set one).
[Ben Laurie, reported by Anonymous <nobody@replay.com>]
1999-01-17 02:46:23 +08:00
*) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
[Ben Laurie]
*) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
parameters. This was causing a warning which killed off the Win32 compile.
[Steve Henson]
*) Remove C++ style comments from crypto/bn/bn_local.h.
[Neil Costigan <neil.costigan@celocom.com>]
*) The function OBJ_txt2nid was broken. It was supposed to return a nid
based on a text string, looking up short and long names and finally
"dot" format. The "dot" format stuff didn't work. Added new function
OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
OID is not part of the table.
[Steve Henson]
*) Add prototypes to X509 lookup/verify methods, fixing a bug in
X509_LOOKUP_by_alias().
[Ben Laurie]
1999-01-10 03:15:59 +08:00
*) Sort openssl functions by name.
[Ben Laurie]
*) Get the gendsa program working (hopefully) and add it to app list. Remove
encryption from sample DSA keys (in case anyone is interested the password
was "1234").
[Steve Henson]
1999-01-08 03:15:59 +08:00
*) Make _all_ *_free functions accept a NULL pointer.
[Frans Heymans <fheymans@isaserver.be>]
*) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
NULL pointers.
[Anonymous <nobody@replay.com>]
1999-01-07 08:16:37 +08:00
*) s_server should send the CAfile as acceptable CAs, not its own cert.
[Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
*) Don't blow it for numeric -newkey arguments to apps/req.
[Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
1999-01-07 07:18:08 +08:00
*) Temp key "for export" tests were wrong in s3_srvr.c.
[Anonymous <nobody@replay.com>]
*) Add prototype for temp key callback functions
SSL_CTX_set_tmp_{rsa,dh}_callback().
[Ben Laurie]
*) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
1999-01-06 09:41:21 +08:00
[Steve Henson]
1999-01-05 05:43:32 +08:00
*) X509_name_add_entry() freed the wrong thing after an error.
[Arne Ansper <arne@ats.cyber.ee>]
1999-01-05 05:39:34 +08:00
*) rsa_eay.c would attempt to free a NULL context.
[Arne Ansper <arne@ats.cyber.ee>]
*) BIO_s_socket() had a broken should_retry() on Windoze.
[Arne Ansper <arne@ats.cyber.ee>]
*) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
[Arne Ansper <arne@ats.cyber.ee>]
*) Make sure the already existing X509_STORE->depth variable is initialized
in X509_STORE_new(), but document the fact that this variable is still
unused in the certificate verification process.
[Ralf S. Engelschall]
*) Fix the various library and apps files to free up pkeys obtained from
X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
[Steve Henson]
1999-01-03 03:04:27 +08:00
*) Fix reference counting in X509_PUBKEY_get(). This makes
demos/maurice/example2.c work, amongst others, probably.
[Steve Henson and Ben Laurie]
*) First cut of a cleanup for apps/. First the `ssleay' program is now named
`openssl' and second, the shortcut symlinks for the `openssl <command>'
are no longer created. This way we have a single and consistent command
line interface `openssl <command>', similar to `cvs <command>'.
1999-01-03 03:04:27 +08:00
[Ralf S. Engelschall, Paul Sutton and Ben Laurie]
*) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
BIT STRING wrapper always have zero unused bits.
[Steve Henson]
*) Add CA.pl, perl version of CA.sh, add extended key usage OID.
[Steve Henson]
*) Make the top-level INSTALL documentation easier to understand.
[Paul Sutton]
*) Makefiles updated to exit if an error occurs in a sub-directory
make (including if user presses ^C) [Paul Sutton]
1999-01-01 01:11:46 +08:00
*) Make Montgomery context stuff explicit in RSA data structure.
[Ben Laurie]
*) Fix build order of pem and err to allow for generated pem.h.
[Ben Laurie]
*) Fix renumbering bug in X509_NAME_delete_entry().
[Ben Laurie]
*) Enhanced the err-ins.pl script so it makes the error library number
global and can add a library name. This is needed for external ASN1 and
other error libraries.
[Steve Henson]
*) Fixed sk_insert which never worked properly.
[Steve Henson]
*) Fix ASN1 macros so they can handle indefinite length constructed
EXPLICIT tags. Some non standard certificates use these: they can now
be read in.
[Steve Henson]
*) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
into a single doc/ssleay.txt bundle. This way the information is still
preserved but no longer messes up this directory. Now it's new room for
the new set of documentation files.
[Ralf S. Engelschall]
*) SETs were incorrectly DER encoded. This was a major pain, because they
shared code with SEQUENCEs, which aren't coded the same. This means that
almost everything to do with SETs or SEQUENCEs has either changed name or
number of arguments.
[Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
*) Fix test data to work with the above.
[Ben Laurie]
*) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
was already fixed by Eric for 0.9.1 it seems.
[Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
1998-12-29 01:14:28 +08:00
*) Autodetect FreeBSD3.
[Ben Laurie]
*) Fix various bugs in Configure. This affects the following platforms:
nextstep
ncr-scde
unixware-2.0
unixware-2.0-pentium
sco5-cc.
[Ben Laurie]
1998-12-26 20:42:56 +08:00
1998-12-29 05:58:19 +08:00
*) Eliminate generated files from CVS. Reorder tests to regenerate files
before they are needed.
[Ben Laurie]
*) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
[Ben Laurie]
Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
1998-12-23 15:58:53 +08:00
1998-12-23 16:18:47 +08:00
*) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
changed SSLeay to OpenSSL in version strings.
1998-12-23 15:58:53 +08:00
[Ralf S. Engelschall]
1998-12-23 15:42:26 +08:00
*) Some fixups to the top-level documents.
[Paul Sutton]
*) Fixed the nasty bug where rsaref.h was not found under compile-time
because the symlink to include/ was missing.
[Ralf S. Engelschall]
*) Incorporated the popular no-RSA/DSA-only patches
which allow to compile a RSA-free SSLeay.
1998-12-23 20:09:47 +08:00
[Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
*) Fixed nasty rehash problem under `make -f Makefile.ssl links'
when "ssleay" is still not found.
[Ralf S. Engelschall]
*) Added more platforms to Configure: Cray T3E, HPUX 11,
[Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
*) Updated the README file.
[Ralf S. Engelschall]
*) Added various .cvsignore files in the CVS repository subdirs
to make a "cvs update" really silent.
[Ralf S. Engelschall]
*) Recompiled the error-definition header files and added
missing symbols to the Win32 linker tables.
[Ralf S. Engelschall]
*) Cleaned up the top-level documents;
o new files: CHANGES and LICENSE
o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
o merged COPYRIGHT into LICENSE
o removed obsolete TODO file
o renamed MICROSOFT to INSTALL.W32
[Ralf S. Engelschall]
*) Removed dummy files from the 0.9.1b source tree:
crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
[Ralf S. Engelschall]
*) Added various platform portability fixes.
1998-12-23 15:42:26 +08:00
[Mark J. Cox]
1998-12-23 15:38:54 +08:00
*) The Genesis of the OpenSSL rpject:
We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
Young and Tim J. Hudson created while they were working for C2Net until
summer 1998.
1998-12-23 15:38:54 +08:00
[The OpenSSL Project]
Changes between 0.9.0b and 0.9.1b [not released]
*) Updated a few CA certificates under certs/
[Eric A. Young]
*) Changed some BIGNUM api stuff.
[Eric A. Young]
*) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
DGUX x86, Linux Alpha, etc.
[Eric A. Young]
*) New COMP library [crypto/comp/] for SSL Record Layer Compression:
RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
available).
[Eric A. Young]
*) Add -strparse option to asn1pars program which parses nested
binary structures
[Dr Stephen Henson <shenson@bigfoot.com>]
*) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
[Eric A. Young]
*) DSA fix for "ca" program.
[Eric A. Young]
*) Added "-genkey" option to "dsaparam" program.
[Eric A. Young]
*) Added RIPE MD160 (rmd160) message digest.
[Eric A. Young]
*) Added -a (all) option to "ssleay version" command.
[Eric A. Young]
*) Added PLATFORM define which is the id given to Configure.
[Eric A. Young]
*) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
[Eric A. Young]
*) Extended the ASN.1 parser routines.
[Eric A. Young]
*) Extended BIO routines to support REUSEADDR, seek, tell, etc.
[Eric A. Young]
*) Added a BN_CTX to the BN library.
[Eric A. Young]
*) Fixed the weak key values in DES library
[Eric A. Young]
*) Changed API in EVP library for cipher aliases.
[Eric A. Young]
*) Added support for RC2/64bit cipher.
[Eric A. Young]
*) Converted the lhash library to the crypto/mem.c functions.
[Eric A. Young]
*) Added more recognized ASN.1 object ids.
[Eric A. Young]
*) Added more RSA padding checks for SSL/TLS.
[Eric A. Young]
*) Added BIO proxy/filter functionality.
[Eric A. Young]
*) Added extra_certs to SSL_CTX which can be used
send extra CA certificates to the client in the CA cert chain sending
process. It can be configured with SSL_CTX_add_extra_chain_cert().
[Eric A. Young]
*) Now Fortezza is denied in the authentication phase because
this is key exchange mechanism is not supported by SSLeay at all.
[Eric A. Young]
*) Additional PKCS1 checks.
[Eric A. Young]
*) Support the string "TLSv1" for all TLS v1 ciphers.
[Eric A. Young]
*) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
ex_data index of the SSL context in the X509_STORE_CTX ex_data.
[Eric A. Young]
*) Fixed a few memory leaks.
[Eric A. Young]
*) Fixed various code and comment typos.
[Eric A. Young]
*) A minor bug in ssl/s3_clnt.c where there would always be 4 0
bytes sent in the client random.
[Edward Bishop <ebishop@spyglass.com>]