[clientloop.c ssh-keygen.c sshd.c]
some unsigned long long casts that make things a bit easier for
portable without resorting to dropping PRIu64 formats everywhere
[kex.c kex.h kexecdh.c kexecdhc.c kexecdhs.c readconf.c readconf.h]
[servconf.c servconf.h ssh_config.5 sshconnect2.c sshd.c sshd_config.5]
add a KexAlgorithms knob to the client and server configuration to allow
selection of which key exchange methods are used by ssh(1) and sshd(8)
and their order of preference.
ok markus@
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c]
reintroduce commit from tedu@, which I pulled out for release
engineering:
OpenSSL_add_all_algorithms is the name of the function we have a
man page for, so use that. ok djm
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c]
OpenSSL_add_all_algorithms is the name of the function we have a man page
for, so use that. ok djm
[PROTOCOL.certkeys auth-options.c auth-options.h auth-rsa.c]
[auth2-pubkey.c authfd.c key.c key.h myproposal.h ssh-add.c]
[ssh-agent.c ssh-dss.c ssh-keygen.1 ssh-keygen.c ssh-rsa.c]
[sshconnect.c sshconnect2.c sshd.c]
revised certificate format ssh-{dss,rsa}-cert-v01@openssh.com with the
following changes:
move the nonce field to the beginning of the certificate where it can
better protect against chosen-prefix attacks on the signature hash
Rename "constraints" field to "critical options"
Add a new non-critical "extensions" field
Add a serial number
The older format is still support for authentication and cert generation
(use "ssh-keygen -t v00 -s ca_key ..." to generate a v00 certificate)
ok markus@
[auth-rhosts.c monitor.c monitor_wrap.c session.c auth-options.c sshd.c]
Hold authentication debug messages until after successful authentication.
Fixes an info leak of environment variables specified in authorized_keys,
reported by Jacob Appelbaum. ok djm@
- djm@cvs.openbsd.org 2010/02/26 20:29:54
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys addrmatch.c auth-options.c]
[auth-options.h auth.h auth2-pubkey.c authfd.c dns.c dns.h hostfile.c]
[hostfile.h kex.h kexdhs.c kexgexs.c key.c key.h match.h monitor.c]
[myproposal.h servconf.c servconf.h ssh-add.c ssh-agent.c ssh-dss.c]
[ssh-keygen.1 ssh-keygen.c ssh-rsa.c ssh.1 ssh.c ssh2.h sshconnect.c]
[sshconnect2.c sshd.8 sshd.c sshd_config.5]
Add support for certificate key types for users and hosts.
OpenSSH certificate key types are not X.509 certificates, but a much
simpler format that encodes a public key, identity information and
some validity constraints and signs it with a CA key. CA keys are
regular SSH keys. This certificate style avoids the attack surface
of X.509 certificates and is very easy to deploy.
Certified host keys allow automatic acceptance of new host keys
when a CA certificate is marked as sh/known_hosts.
see VERIFYING HOST KEYS in ssh(1) for details.
Certified user keys allow authentication of users when the signing
CA key is marked as trusted in authorized_keys. See "AUTHORIZED_KEYS
FILE FORMAT" in sshd(8) for details.
Certificates are minted using ssh-keygen(1), documentation is in
the "CERTIFICATES" section of that manpage.
Documentation on the format of certificates is in the file
PROTOCOL.certkeys
feedback and ok markus@
[servconf.c servconf.h sshd.c]
avoid run-time failures when specifying hostkeys via a relative
path by prepending the cwd in these cases; bz#1290; ok dtucker@
[channels.c ssh.1 servconf.c sshd_config.5 sshd.c channels.h servconf.h
ssh-keyscan.1 ssh-keyscan.c readconf.c sshconnect.c misc.c ssh.c
readconf.h scp.1 sftp.1 ssh_config.5 misc.h]
Remove RoutingDomain from ssh since it's now not needed. It can be
replaced with "route exec" or "nc -V" as a proxycommand. "route exec"
also ensures that trafic such as DNS lookups stays withing the specified
routingdomain. For example (from reyk):
# route -T 2 exec /usr/sbin/sshd
or inherited from the parent process
$ route -T 2 exec sh
$ ssh 10.1.2.3
ok deraadt@ markus@ stevesk@ reyk@
[sshd.c]
Afer sshd receives a SIGHUP, ignore subsequent HUPs while sshd re-execs
itself. Prevents two HUPs in quick succession from resulting in sshd
dying. bz#1692, patch from Colin Watson via Ubuntu.
[ssh_config.5 sshd.c misc.h ssh-keyscan.1 readconf.h sshconnect.c
channels.c channels.h servconf.h servconf.c ssh.1 ssh-keyscan.c scp.1
sftp.1 sshd_config.5 readconf.c ssh.c misc.c]
Allow to set the rdomain in ssh/sftp/scp/sshd and ssh-keyscan.
ok markus@
set IPV6_V6ONLY for local forwarding with GatwayPorts=yes. Unify
setting IPV6_V6ONLY behind a new function misc.c:sock_set_v6only()
report and fix from jan.kratochvil AT redhat.com
[sshd.c packet.c serverloop.c monitor_wrap.c clientloop.c sshconnect.c
monitor.c Added roaming.h roaming_common.c roaming_dummy.c]
Keep track of number of bytes read and written. Needed for upcoming
changes. Most code from Martin Forssen, maf at appgate dot com.
ok markus@
Also, applied appropriate changes to Makefile.in
[clientloop.c misc.c readconf.c readconf.h servconf.c servconf.h]
[serverloop.c ssh-keyscan.c ssh.c sshd.c]
make a2port() return -1 when it encounters an invalid port number
rather than 0, which it will now treat as valid (needed for future work)
adjust current consumers of a2port() to check its return value is <= 0,
which in turn required some things to be converted from u_short => int
make use of int vs. u_short consistent in some other places too
feedback & ok markus@
[packet.c scp.c serverloop.c sftp-client.c ssh-agent.c ssh-keyscan.c]
[sshd.c] Explicitly handle EWOULDBLOCK wherever we handle EAGAIN, on
some platforms (HP nonstop) it is a distinct errno;
bz#1467 reported by sconeu AT yahoo.com; ok dtucker@
[sshd.c sshconnect.c packet.h misc.c misc.h packet.c]
Make keepalive timeouts apply while waiting for a packet, particularly
during key renegotiation (bz #1363). With djm and Matt Day, ok djm@
[sshd.c channels.h channels.c log.c servconf.c log.h servconf.h sshd.8]
Add extended test mode (-T) and connection parameters for test mode (-C).
-T causes sshd to write its effective configuration to stdout and exit.
-C causes any relevant Match rules to be applied before output. The
combination allows tesing of the parser and config files. ok deraadt djm
[auth-options.c auth1.c channels.c channels.h clientloop.c gss-serv.c]
[monitor.c monitor_wrap.c nchan.c servconf.c serverloop.c session.c]
[ssh.c sshd.c]
Implement a channel success/failure status confirmation callback
mechanism. Each channel maintains a queue of callbacks, which will
be drained in order (RFC4253 guarantees confirm messages are not
reordered within an channel).
Also includes a abandonment callback to clean up if a channel is
closed without sending confirmation messages. This probably
shouldn't happen in compliant implementations, but it could be
abused to leak memory.
ok markus@ (as part of a larger diff)
- djm@cvs.openbsd.org 2008/04/13 00:22:17
[dh.c sshd.c]
Use arc4random_buf() when requesting more than a single word of output
Use arc4random_uniform() when the desired random number upper bound
is not a power of two
ok deraadt@ millert@
openbsd-compat/openssl-compat.{c,h}] Bug #1437 Move the OpenSSL compat
header to after OpenSSL headers, since some versions of OpenSSL have
SSLeay_add_all_algorithms as a macro already.
[sshd.c]
When in inetd mode, have sshd generate a Protocol 1 ephemeral server
key only for connections where the client chooses Protocol 1 as opposed
to when it's enabled in the server's config. Speeds up Protocol 2
connections to inetd-mode servers that also allow Protocol 1. bz #440,
based on a patch from bruno at wolff.to, ok markus@
[servconf.c canohost.c misc.c channels.c sshconnect.c misc.h ssh-keyscan.c
sshd.c]
Add a small helper function to consistently handle the EAI_SYSTEM error
code of getaddrinfo. Prompted by vgiffin at apple com via bz #1417.
ok markus@ stevesk@
[servconf.c sshd.c]
Move C/R -> kbdint special case to after the defaults have been
loaded, which makes ChallengeResponse default to yes again. This
was broken by the Match changes and not fixed properly subsequently.
Found by okan at demirmen.com, ok djm@ "please do it" deraadt@
[sshd.c]
Clear alarm() before restarting sshd on SIGHUP. Without this, if there's
a SIGALRM pending (for SSH1 key regeneration) when sshd is SIGHUP'ed, the
newly exec'ed sshd will get the SIGALRM and not have a handler for it,
and the default action will terminate the listening sshd. Analysis and
patch from andrew at gaul.org.
be used to drop privilege to; fixes Solaris GSSAPI crash reported by
Magnus Abrante; suggestion and feedback dtucker@
NB. this change will require that the privilege separation user must
exist on all the time, not just when UsePrivilegeSeparation=yes
[platform.c platform.h sshd.c openbsd-compat/Makefile.in]
[openbsd-compat/openbsd-compat.h openbsd-compat/port-solaris.c]
[openbsd-compat/port-solaris.h] Add support for Solaris process
contracts, enabled with --use-solaris-contracts. Patch from Chad
Mynhier, tweaked by dtucker@ and myself; ok dtucker@
