[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
[ssh.1 ssh_config.5 sshd.8]
Remove mentions of weird "addr/port" alternate address format for IPv6
addresses combinations. It hasn't worked for ages and we have supported
the more commen "[addr]:port" format for a long time. ok jmc@ markus@
[PROTOCOL.mux clientloop.h mux.c readconf.c readconf.h ssh.1 ssh.c]
mux support for remote forwarding with dynamic port allocation,
use with
LPORT=`ssh -S muxsocket -R0:localhost:25 -O forward somehost`
feedback and ok djm@
[auth-rh-rsa.c auth-rsa.c auth.c auth.h auth2-hostbased.c auth2-pubkey.c]
[authfile.c authfile.h hostfile.c hostfile.h servconf.c servconf.h]
[ssh-keygen.c ssh.1 sshconnect.c sshd_config.5]
Add a TrustedUserCAKeys option to sshd_config to specify CA keys that
are trusted to authenticate users (in addition than doing it per-user
in authorized_keys).
Add a RevokedKeys option to sshd_config and a @revoked marker to
known_hosts to allow keys to me revoked and banned for user or host
authentication.
feedback and ok markus@
- djm@cvs.openbsd.org 2010/02/26 20:29:54
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys addrmatch.c auth-options.c]
[auth-options.h auth.h auth2-pubkey.c authfd.c dns.c dns.h hostfile.c]
[hostfile.h kex.h kexdhs.c kexgexs.c key.c key.h match.h monitor.c]
[myproposal.h servconf.c servconf.h ssh-add.c ssh-agent.c ssh-dss.c]
[ssh-keygen.1 ssh-keygen.c ssh-rsa.c ssh.1 ssh.c ssh2.h sshconnect.c]
[sshconnect2.c sshd.8 sshd.c sshd_config.5]
Add support for certificate key types for users and hosts.
OpenSSH certificate key types are not X.509 certificates, but a much
simpler format that encodes a public key, identity information and
some validity constraints and signs it with a CA key. CA keys are
regular SSH keys. This certificate style avoids the attack surface
of X.509 certificates and is very easy to deploy.
Certified host keys allow automatic acceptance of new host keys
when a CA certificate is marked as sh/known_hosts.
see VERIFYING HOST KEYS in ssh(1) for details.
Certified user keys allow authentication of users when the signing
CA key is marked as trusted in authorized_keys. See "AUTHORIZED_KEYS
FILE FORMAT" in sshd(8) for details.
Certificates are minted using ssh-keygen(1), documentation is in
the "CERTIFICATES" section of that manpage.
Documentation on the format of certificates is in the file
PROTOCOL.certkeys
feedback and ok markus@
[pathnames.h readconf.c readconf.h scp.1 sftp.1 ssh-add.1 ssh-add.c]
[ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config.5]
replace our obsolete smartcard code with PKCS#11.
ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20/pkcs-11v2-20.pdf
ssh(1) and ssh-keygen(1) use dlopen(3) directly to talk to a PKCS#11
provider (shared library) while ssh-agent(1) delegates PKCS#11 to
a forked a ssh-pkcs11-helper process.
PKCS#11 is currently a compile time option.
feedback and ok djm@; inspired by patches from Alon Bar-Lev
`
[ssh_config channels.c ssh.1 channels.h ssh.c]
Add a 'netcat mode' (ssh -W). This connects stdio on the client to a
single port forward on the server. This allows, for example, using ssh as
a ProxyCommand to route connections via intermediate servers.
bz #1618, man page help from jmc@, ok markus@
[channels.c ssh.1 servconf.c sshd_config.5 sshd.c channels.h servconf.h
ssh-keyscan.1 ssh-keyscan.c readconf.c sshconnect.c misc.c ssh.c
readconf.h scp.1 sftp.1 ssh_config.5 misc.h]
Remove RoutingDomain from ssh since it's now not needed. It can be
replaced with "route exec" or "nc -V" as a proxycommand. "route exec"
also ensures that trafic such as DNS lookups stays withing the specified
routingdomain. For example (from reyk):
# route -T 2 exec /usr/sbin/sshd
or inherited from the parent process
$ route -T 2 exec sh
$ ssh 10.1.2.3
ok deraadt@ markus@ stevesk@ reyk@
[sshd_config.5 readconf.c ssh_config.5 scp.1 servconf.c sftp.1 ssh.1]
Rename RDomain config option to RoutingDomain to be more clear and
consistent with other options.
NOTE: if you currently use RDomain in the ssh client or server config,
or ssh/sshd -o, you must update to use RoutingDomain.
ok markus@ djm@
[ssh_config.5 sshd.c misc.h ssh-keyscan.1 readconf.h sshconnect.c
channels.c channels.h servconf.h servconf.c ssh.1 ssh-keyscan.c scp.1
sftp.1 sshd_config.5 readconf.c ssh.c misc.c]
Allow to set the rdomain in ssh/sftp/scp/sshd and ssh-keyscan.
ok markus@
[ssh-agent.1 ssh-add.1 ssh.1]
write UNIX-domain in a more consistent way; while here, replace a
few remaining ".Tn UNIX" macros with ".Ux" ones.
pointed out by ratchov@, thanks!
ok jmc@
[ssh.1]
for "Ciphers", just point the reader to the keyword in ssh_config(5), just
as we do for "MACs": this stops us getting out of sync when the lists
change;
fixes documentation/6102, submitted by Peter J. Philipp
alternative fix proposed by djm
ok markus
[ssh.1 ssh.c]
Add -y option to force logging via syslog rather than stderr.
Useful for daemonised ssh connection (ssh -f). Patch originally from
and ok'd by markus@
[ssh.1 ssh.c]
When forking after authentication ("ssh -f") with ExitOnForwardFailure
enabled, delay the fork until after replies for any -R forwards have
been seen. Allows for robust detection of -R forward failure when
using -f (similar to bz#92); ok dtucker@
[readconf.c readconf.h ssh.1 ssh_config.5 sshconnect.c]
Move SSH Fingerprint Visualization away from sharing the config option
CheckHostIP to an own config option named VisualHostKey.
While there, fix the behaviour that ssh would draw a random art picture
on every newly seen host even when the option was not enabled.
prodded by deraadt@, discussions,
help and ok markus@ djm@ dtucker@
[ssh.1]
Explain the use of SSH fpr visualization using random art, and cite the
original scientific paper inspiring that technique.
Much help with English and nroff by jmc@, thanks.
[ssh.c ssh.1]
Add "-K" flag for ssh to set GSSAPIAuthentication=yes and
GSSAPIDelegateCredentials=yes. This is symmetric with -k (disable GSSAPI)
and is useful for hosts with /home on Kerberised NFS; bz #1312
patch from Markus.Kuhn AT cl.cam.ac.uk; ok dtucker@ markus@
[kex.h mac.c mac.h monitor_wrap.c myproposal.h packet.c ssh.1]
[ssh_config.5 sshd.8 sshd_config.5]
Add a new MAC algorithm for data integrity, UMAC-64 (not default yet,
must specify umac-64@openssh.com). Provides about 20% end-to-end speedup
compared to hmac-md5. Represents a different approach to message
authentication to that of HMAC that may be beneficial if HMAC based on
one of its underlying hash algorithms is found to be vulnerable to a
new attack. http://www.ietf.org/rfc/rfc4418.txt
in conjunction with and OK djm@
[scp.1 ssh_config.5 sftp-server.8 ssh-agent.1 sshd_config.5 sftp.1
ssh-keygen.1 ssh-keyscan.1 ssh-add.1 sshd.8 ssh.1 ssh-keysign.8]
convert to new .Dd format;
(We will need to teach mdoc2man.awk to understand this too.)
[clientloop.c ssh.1 ssh.c channels.c ssh_config.5 readconf.h session.c
channels.h readconf.c]
add ExitOnForwardFailure: terminate the connection if ssh(1)
cannot set up all requested dynamic, local, and remote port
forwardings. ok djm, dtucker, stevesk, jmc
[scp.1 ssh.1 ssh_config.5 sftp.1]
Document RekeyLimit. Based on patch from jan.iven at cern.ch from mindrot
#1056 with feedback from jmc, djm and markus; ok jmc@ djm@
[ssh.1]
split sections on tcp and x11 forwarding into two sections.
add an example in the tcp section, based on sth i wrote for ssh faq;
help + ok: djm markus dtucker
[ssh.1]
move FILES to a -compact list, and make each files an item in that list.
this avoids nastly line wrap when we have long pathnames, and treats
each file as a separate item;
remove the .Pa too, since it is useless.
- jmc@cvs.openbsd.org 2005/12/31 10:46:17
[ssh.1]
merge the "LOGIN SESSION AND REMOTE EXECUTION" and "SERVER
AUTHENTICATION" sections into "AUTHENTICATION";
some rewording done to make the text read better, plus some
improvements from djm;
ok djm
[ssh.1]
- sync the description of -e w/ synopsis
- simplify the description of -I
- note that -I is only available if support compiled in, and that it
isn't by default
feedback/ok djm@
[auth-options.c auth-options.h channels.c channels.h clientloop.c]
[misc.c misc.h readconf.c readconf.h scp.c servconf.c servconf.h]
[serverloop.c sftp.c ssh.1 ssh.c ssh_config ssh_config.5 sshconnect.c]
[sshconnect.h sshd.8 sshd_config sshd_config.5]
Add support for tun(4) forwarding over OpenSSH, based on an idea and
initial channel code bits by markus@. This is a simple and easy way to
use OpenSSH for ad hoc virtual private network connections, e.g.
administrative tunnels or secure wireless access. It's based on a new
ssh channel and works similar to the existing TCP forwarding support,
except that it depends on the tun(4) network interface on both ends of
the connection for layer 2 or layer 3 tunneling. This diff also adds
support for LocalCommand in the ssh(1) client.
ok djm@, markus@, jmc@ (manpages), tested and discussed with others
