in OpenBSD (they are the same value) but makes things easier in -portable
where they may be distinct values. "sigh ok" deraadt@
(ID sync only, portable already had this change).
OpenBSD-Commit-ID: 91f2bc7c0ecec905915ed59fa37feb9cc90e17d7
the progressmeter formatting outside of signal handler context and have the
atomicio callback called for EINTR too. bz#2434 with contributions from djm
and jjelen at redhat.com, ok djm@
OpenBSD-Commit-ID: 1af61c1f70e4f3bd8ab140b9f1fa699481db57d8
In the cases where we can't compare to read or readv function pointers
for some reason we currently ifdef out the poll() used to block while
waiting for reads or writes, falling back to busy waiting. This restores
the poll() in this case, but has it always check for read or write,
removing an inline ifdef in the process.
Replace <sys/param.h> with <limits.h> and other less
dirty headers where possible. Annotate <sys/param.h> lines with their
current reasons. Switch to PATH_MAX, NGROUPS_MAX, HOST_NAME_MAX+1,
LOGIN_NAME_MAX, etc. Change MIN() and MAX() to local definitions of
MINIMUM() and MAXIMUM() where sensible to avoid pulling in the pollution.
These are the files confirmed through binary verification. ok guenther,
millert, doug (helped with the verification protocol)
different symbols for 'read' when various compiler flags are
in use, causing atomicio.c comparisons against it to break and
read/write operations to hang; ok dtucker
[atomicio.c atomicio.h misc.c misc.h scp.c sftp-client.c]
[sftp-client.h sftp.1 sftp.c]
add an option per-read/write callback to atomicio
factor out bandwidth limiting code from scp(1) into a generic bandwidth
limiter that can be attached using the atomicio callback mechanism
add a bandwidth limit option to sftp(1) using the above
"very nice" markus@
[packet.c scp.c serverloop.c sftp-client.c ssh-agent.c ssh-keyscan.c]
[sshd.c] Explicitly handle EWOULDBLOCK wherever we handle EAGAIN, on
some platforms (HP nonstop) it is a distinct errno;
bz#1467 reported by sconeu AT yahoo.com; ok dtucker@
openbsd-compat/bsd-poll.{c,h} openbsd-compat/openbsd-compat.h]
Add an implementation of poll() built on top of select(2). Code from
OpenNTPD with changes suggested by djm. ok djm@
[atomicio.c]
if the fd passed to atomicio/atomiciov() is non blocking, then poll() to
avoid a spin if it is not yet ready for reading/writing; ok dtucker@
[atomicio.c atomicio.h]
introduce atomiciov() function that wraps readv/writev to retry
interrupted transfers like atomicio() does for read/write;
feedback deraadt@ dtucker@ stevesk@ ok deraadt@
[atomicio.c atomicio.h authfd.c monitor_wrap.c msg.c scp.c sftp-client.c]
[ssh-keyscan.c sshconnect.c]
Switch atomicio to use a simpler interface; it now returns a size_t
(containing number of bytes read/written), and indicates error by
returning 0. EOF is signalled by errno==EPIPE.
Typical use now becomes:
if (atomicio(read, ..., len) != len)
err(1,"read");
ok deraadt@, cloder@, djm@
- markus@cvs.openbsd.org 2000/09/05 02:59:57
[session.c]
print hostname (not hushlogin)
- markus@cvs.openbsd.org 2000/09/05 13:18:48
[authfile.c ssh-add.c]
enable ssh-add -d for DSA keys
- markus@cvs.openbsd.org 2000/09/05 13:20:49
[sftp-server.c]
cleanup
- markus@cvs.openbsd.org 2000/09/06 03:46:41
[authfile.h]
prototype
- deraadt@cvs.openbsd.org 2000/09/07 14:27:56
[ALL]
cleanup copyright notices on all files. I have attempted to be
accurate with the details. everything is now under Tatu's licence
(which I copied from his readme), and/or the core-sdi bsd-ish thing
for deattack, or various openbsd developers under a 2-term bsd
licence. We're not changing any rules, just being accurate.
- markus@cvs.openbsd.org 2000/09/07 14:40:30
[channels.c channels.h clientloop.c serverloop.c ssh.c]
cleanup window and packet sizes for ssh2 flow control; ok niels
- markus@cvs.openbsd.org 2000/09/07 14:53:00
[scp.c]
typo
- markus@cvs.openbsd.org 2000/09/07 15:13:37
[auth-options.c auth-options.h auth-rh-rsa.c auth-rsa.c auth.c]
[authfile.h canohost.c channels.h compat.c hostfile.h log.c match.h]
[pty.c readconf.c]
some more Copyright fixes
- markus@cvs.openbsd.org 2000/09/08 03:02:51
[README.openssh2]
bye bye
- deraadt@cvs.openbsd.org 2000/09/11 18:38:33
[LICENCE cipher.c]
a few more comments about it being ARC4 not RC4
- markus@cvs.openbsd.org 2000/09/12 14:53:11
[log-client.c log-server.c log.c ssh.1 ssh.c ssh.h sshd.8 sshd.c]
multiple debug levels
- markus@cvs.openbsd.org 2000/09/14 14:25:15
[clientloop.c]
typo
- deraadt@cvs.openbsd.org 2000/09/15 01:13:51
[ssh-agent.c]
check return value for setenv(3) for failure, and deal appropriately
- All OpenSSL includes are now unconditionally referenced as
openssl/foo.h
- Pick up formatting changes
- Other minor changed (typecasts, etc) that I missed
[ssh.h atomicio.c]
- int atomicio -> ssize_t (for alpha). ok deraadt@
[auth-rsa.c]
- delay MD5 computation until client sends response, free() early, cleanup.
[cipher.c]
- void* -> unsigned char*, ok niels@
[hostfile.c]
- remove unused variable 'len'. fix comments.
- remove unused variable
[log-client.c log-server.c]
- rename a cpp symbol, to avoid param.h collision
[packet.c]
- missing xfree()
- getsockname() requires initialized tolen; andy@guildsoftware.com
- use getpeername() in packet_connection_is_on_socket(), fixes sshd -i;
from Holger.Trapp@Informatik.TU-Chemnitz.DE
[pty.c pty.h]
- register cleanup for pty earlier. move code for pty-owner handling to
pty.c ok provos@, dugsong@
[readconf.c]
- turn off x11-fwd for the client, too.
[rsa.c]
- PKCS#1 padding
[scp.c]
- allow '.' in usernames; from jedgar@fxp.org
[servconf.c]
- typo: ignore_user_known_hosts int->flag; naddy@mips.rhein-neckar.de
- sync with sshd_config
[ssh-keygen.c]
- enable ssh-keygen -l -f ~/.ssh/known_hosts, ok deraadt@
[ssh.1]
- Change invalid 'CHAT' loglevel to 'VERBOSE'
[ssh.c]
- suppress AAAA query host when '-4' is used; from shin@nd.net.fujitsu.co.jp
- turn off x11-fwd for the client, too.
[sshconnect.c]
- missing xfree()
- retry rresvport_af(), too. from sumikawa@ebina.hitachi.co.jp.
- read error vs. "Connection closed by remote host"
[sshd.8]
- ie. -> i.e.,
- do not link to a commercial page..
- sync with sshd_config
[sshd.c]
- no need for poll.h; from bright@wintelcom.net
- log with level log() not fatal() if peer behaves badly.
- don't panic if client behaves strange. ok deraadt@
- make no-port-forwarding for RSA keys deny both -L and -R style fwding
- delay close() of pty until the pty has been chowned back to root
- oops, fix comment, too.
- missing xfree()
- move XAUTHORITY to subdir. ok dugsong@. fixes debian bug #57907, too.
(http://cgi.debian.org/cgi-bin/bugreport.cgi?archive=no&bug=57907)
- register cleanup for pty earlier. move code for pty-owner handling to
pty.c ok provos@, dugsong@
- create x11 cookie file
- fix pr 1113, fclose() -> pclose(), todo: remote popen()
- version 1.2.3
- Cleaned up
- [atomicio.c authfd.c scp.c serverloop.c ssh.h sshconnect.c sshd.c]
move atomicio into it's own file. wrap all socket write()s which
were doing write(sock, buf, len) != len, with atomicio() calls.
- [auth-skey.c]
fd leak
- [authfile.c]
properly name fd variable
- [channels.c]
display great hatred towards strcpy
- [pty.c pty.h sshd.c]
use openpty() if it exists (it does on BSD4_4)
- [tildexpand.c]
check for ~ expansion past MAXPATHLEN
- Modified helper.c to use new atomicio function.
- Reformat Makefile a little
- Moved RC4 routines from rc4.[ch] into helper.c
- Added autoconf code to detect /dev/ptmx (Solaris) and /dev/ptc (AIX)
