to the active configuration. This fixes the config parser from erroneously
rejecting cases like:
AuthenticationMethods password
Match User ivy
AuthenticationMethods any
bz3657 ok markus@
OpenBSD-Commit-ID: 7f196cba634c2a3dba115f3fac3c4635a2199491
This attempts to hide inter-keystroke timings by sending interactive
traffic at fixed intervals (default: every 20ms) when there is only a
small amount of data being sent. It also sends fake "chaff" keystrokes
for a random interval after the last real keystroke. These are
controlled by a new ssh_config ObscureKeystrokeTiming keyword/
feedback/ok markus@
OpenBSD-Commit-ID: 02231ddd4f442212820976068c34a36e3c1b15be
This adds a ssh_config(5) "Tag" directive and corresponding
"Match tag" predicate that may be used to select blocks of
configuration similar to the pf.conf(5) keywords of the same
name.
ok markus
OpenBSD-Commit-ID: dc08358e70e702b59ac3e591827e5a96141b06a3
This option (default "no") controls whether the ~C escape is available.
Turning it off by default means we will soon be able to use a stricter
default pledge(2) in the client.
feedback deraadt@ dtucker@; tested in snaps for a while
OpenBSD-Commit-ID: 7e277595d60acb8263118dcb66554472257b387a
ssh(1). User authentication keys that fall beneath this limit will be
ignored. If a host presents a host key beneath this limit then the connection
will be terminated (unfortunately there are no fallbacks in the protocol for
host authentication).
feedback deraadt, Dmitry Belyavskiy; ok markus@
OpenBSD-Commit-ID: 430e339b2a79fa9ecc63f2837b06fdd88a7da13a
sshd_config and sshd_config; previously if the same name was reused then the
last would win (which is the opposite to how the config is supposed to work).
While there, make the ssh_config parsing more like sshd_config.
bz3438, ok dtucker
OpenBSD-Commit-ID: 797909c1e0262c0d00e09280459d7ab00f18273b
Allow control over which pubkey methods are used. Added out of
concern that some hardware devices may have difficulty signing
the longer pubkey authentication challenges. This provides a
way for them to disable the extension. It's also handy for
testing.
feedback / ok markus@
OpenBSD-Commit-ID: ee52580db95c355cf6d563ba89974c210e603b1a
the config file to do the same thing as -n does on the ssh(1) commandline.
Patch from Volker Diels-Grabsch via GHPR231; ok dtucker
OpenBSD-Commit-ID: 66ddf3f15c76796d4dcd22ff464aed1edd62468e
configuration file to offer equivalent control to the -N (no session) and -s
(subsystem) command-line flags.
Part of GHPR#231 by Volker Diels-Grabsch with some minor tweaks;
feedback and ok dtucker@
OpenBSD-Commit-ID: 726ee931dd4c5cc7f1d7a187b26f41257f9a2d12
HostbasedAcceptedKeyTypes (sshd) to HostbasedAcceptedAlgorithms, which more
accurately reflects its effect. This matches a previous change to
PubkeyAcceptedAlgorithms. The previous names are retained as aliases. ok
djm@
OpenBSD-Commit-ID: 49451c382adc6e69d3fa0e0663eeef2daa4b199e
PubkeyAcceptedAlgorithms. While the two were originally equivalent, this
actually specifies the signature algorithms that are accepted. Some key
types (eg RSA) can be used by multiple algorithms (eg ssh-rsa, rsa-sha2-512)
so the old name is becoming increasingly misleading. The old name is
retained as an alias. Prompted by bz#3253, help & ok djm@, man page help jmc@
OpenBSD-Commit-ID: 0346b2f73f54c43d4e001089759d149bfe402ca5
to obtain known_hosts data from a command in addition to the usual files.
The command accepts bunch of %-expansions, including details of the
connection and the offered server host key. Note that the command may
be invoked up to three times per connection (see the manpage for
details).
ok markus@
OpenBSD-Commit-ID: 2433cff4fb323918ae968da6ff38feb99b4d33d0
limit for keys in addition to its current flag options. Time-limited keys
will automatically be removed from ssh-agent after their expiry time has
passed; ok markus@
OpenBSD-Commit-ID: 792e71cacbbc25faab5424cf80bee4a006119f94
percent_expansions more consistent. - %C is moved into its own function and
added to Match Exec. - move the common (global) options into a macro. This
is ugly but it's the least-ugly way I could come up with. - move
IdentityAgent and ForwardAgent percent expansion to before the config dump
to make it regression-testable. - document all of the above
ok jmc@ for man page bits, "makes things less terrible" djm@ for the rest.
OpenBSD-Commit-ID: 4b65664bd6d8ae2a9afaf1a2438ddd1b614b1d75
time and remove ifdef and distinct settings for OPENSSL=no case.
This will make things much simpler for -portable where the exact set
of algos depends on the configuration of both OpenSSH and the libcrypto
it's linked against (if any). ok djm@
OpenBSD-Commit-ID: e0116d0183dcafc7a9c40ba5fe9127805c5dfdd2
specified by $SSH_AUTH_SOCK, by extending the existing ForwardAgent option to
accepting an explicit path or the name of an environment variable in addition
to yes/no.
Patch by Eric Chiang, manpage by me; ok markus@
OpenBSD-Commit-ID: 98f2ed80bf34ea54d8b2ddd19ac14ebbf40e9265
Matches in same pass as "Match canonical" but doesn't require
hostname canonicalisation be enabled. bz#2906 ok markus
OpenBSD-Commit-ID: fba1dfe9f6e0cabcd0e2b3be13f7a434199beffa
it to specify which signature algorithms may be used by CAs when signing
certificates. Useful if you want to ban RSA/SHA1; ok markus@
OpenBSD-Commit-ID: 9159e5e9f67504829bf53ff222057307a6e3230f
ssh(1) setuid has been removed, remove supporting code and clean up
references to it in the man pages
We have not shipped ssh(1) the setuid bit since 2002. If ayone
really needs to make connections from a low port number this can
be implemented via a small setuid ProxyCommand.
ok markus@ jmc@ djm@
OpenBSD-Commit-ID: d03364610b7123ae4c6792f5274bd147b6de717e
environment variables for the remote session (subject to the server accepting
them)
refactor SendEnv to remove the arbitrary limit of variable names.
ok markus@
OpenBSD-Commit-ID: cfbb00d9b0e10c1ffff1d83424351fd961d1f2be
command-line argument to ssh(1) that directs it to bind its outgoing
connection to the address of the specified network interface.
BindInterface prefers to use addresses that aren't loopback or link-
local, but will fall back to those if no other addresses of the
required family are available on that interface.
Based on patch by Mike Manning in bz#2820, ok dtucker@
OpenBSD-Commit-ID: c5064d285c2851f773dd736a2c342aa384fbf713
Add URI support to ssh, sftp and scp. For example
ssh://user@host or sftp://user@host/path. The connection parameters
described in draft-ietf-secsh-scp-sftp-ssh-uri-04 are not implemented since
the ssh fingerprint format in the draft uses md5 with no way to specify the
hash function type. OK djm@
Upstream-ID: 4ba3768b662d6722de59e6ecb00abf2d4bf9cacc
Expand ssh_config's StrictModes option with two new
settings:
StrictModes=accept-new will automatically accept hitherto-unseen keys
but will refuse connections for changed or invalid hostkeys.
StrictModes=off is the same as StrictModes=no
Motivation:
StrictModes=no combines two behaviours for host key processing:
automatically learning new hostkeys and continuing to connect to hosts
with invalid/changed hostkeys. The latter behaviour is quite dangerous
since it removes most of the protections the SSH protocol is supposed to
provide.
Quite a few users want to automatically learn hostkeys however, so
this makes that feature available with less danger.
At some point in the future, StrictModes=no will change to be a synonym
for accept-new, with its current behaviour remaining available via
StrictModes=off.
bz#2400, suggested by Michael Samuel; ok markus
Upstream-ID: 0f55502bf75fc93a74fb9853264a8276b9680b64
Add RemoteCommand option to specify a command in the
ssh config file instead of giving it on the client's command line. This
command will be executed on the remote host. The feature allows to automate
tasks using ssh config. OK markus@
Upstream-ID: 5d982fc17adea373a9c68cae1021ce0a0904a5ee
Add SyslogFacility option to ssh(1) matching the
equivalent option in sshd(8). bz#2705, patch from erahn at arista.com, ok
djm@
Upstream-ID: d5115c2c0193ceb056ed857813b2a7222abda9ed
Add a ProxyJump ssh_config(5) option and corresponding -J
ssh(1) command-line flag to allow simplified indirection through a SSH
bastion or "jump host".
These options construct a proxy command that connects to the
specified jump host(s) (more than one may be specified) and uses
port-forwarding to establish a connection to the next destination.
This codifies the safest way of indirecting connections through SSH
servers and makes it easy to use.
ok markus@
Upstream-ID: fa899cb8b26d889da8f142eb9774c1ea36b04397
Move the host and port used by ssh -W into the Options
struct. This will make future changes a bit easier. ok djm@
Upstream-ID: 151bce5ecab2fbedf0d836250a27968d30389382
Add an AddKeysToAgent client option which can be set to
'yes', 'no', 'ask', or 'confirm', and defaults to 'no'. When enabled, a
private key that is used during authentication will be added to ssh-agent if
it is running (with confirmation enabled if set to 'confirm').
Initial version from Joachim Schipper many years ago.
ok markus@
Upstream-ID: a680db2248e8064ec55f8be72d539458c987d5f4
add ssh_config CertificateFile option to explicitly list
a certificate; patch from Meghana Bhat on bz#2436; ok markus@
Upstream-ID: 58648ec53c510b41c1f46d8fe293aadc87229ab8
Turn off DSA by default; add HostKeyAlgorithms to the
server and PubkeyAcceptedKeyTypes to the client side, so it still can be
tested or turned back on; feedback and ok djm@
Upstream-ID: 8450a9e6d83f80c9bfed864ff061dfc9323cec21
Revise hostkeys@openssh.com hostkey learning extension.
The client will not ask the server to prove ownership of the private
halves of any hitherto-unseen hostkeys it offers to the client.
Allow UpdateHostKeys option to take an 'ask' argument to let the
user manually review keys offered.
ok markus@
Add a ssh_config HostbasedKeyType option to control which
host public key types are tried during hostbased authentication.
This may be used to prevent too many keys being sent to the server,
and blowing past its MaxAuthTries limit.
bz#2211 based on patch by Iain Morgan; ok markus@