criteria tokeniser to a more shell-like one. Apparently the old tokeniser
(accidentally?) allowed "Match criteria=argument" as well as the "Match
criteria argument" syntax that we tested for.
People were using this syntax so this adds back support for
"Match criteria=argument"
bz3739 ok dtucker
OpenBSD-Commit-ID: d1eebedb8c902002b75b75debfe1eeea1801f58a
problematic client behaviours, controlled by two new sshd_config(5) options:
PerSourcePenalties and PerSourcePenaltyExemptList.
When PerSourcePenalties are enabled, sshd(8) will monitor the exit
status of its child pre-auth session processes. Through the exit
status, it can observe situations where the session did not
authenticate as expected. These conditions include when the client
repeatedly attempted authentication unsucessfully (possibly indicating
an attack against one or more accounts, e.g. password guessing), or
when client behaviour caused sshd to crash (possibly indicating
attempts to exploit sshd).
When such a condition is observed, sshd will record a penalty of some
duration (e.g. 30 seconds) against the client's address. If this time
is above a minimum threshold specified by the PerSourcePenalties, then
connections from the client address will be refused (along with any
others in the same PerSourceNetBlockSize CIDR range).
Repeated offenses by the same client address will accrue greater
penalties, up to a configurable maximum. A PerSourcePenaltyExemptList
option allows certain address ranges to be exempt from all penalties.
We hope these options will make it significantly more difficult for
attackers to find accounts with weak/guessable passwords or exploit
bugs in sshd(8) itself.
PerSourcePenalties is off by default, but we expect to enable it
automatically in the near future.
much feedback markus@ and others, ok markus@
OpenBSD-Commit-ID: 89ded70eccb2b4926ef0366a4d58a693de366cca
binaries. This step splits sshd into a listener and a session binary. More
splits are planned.
After this changes, the listener binary will validate the configuration,
load the hostkeys, listen on port 22 and manage MaxStartups only. All
session handling will be performed by a new sshd-session binary that the
listener fork+execs.
This reduces the listener process to the minimum necessary and sets us
up for future work on the sshd-session binary.
feedback/ok markus@ deraadt@
NB. if you're updating via source, please restart sshd after installing,
otherwise you run the risk of locking yourself out.
OpenBSD-Commit-ID: 43c04a1ab96cdbdeb53d2df0125a6d42c5f19934
to the active configuration. This fixes the config parser from erroneously
rejecting cases like:
AuthenticationMethods password
Match User ivy
AuthenticationMethods any
bz3657 ok markus@
OpenBSD-Commit-ID: 7f196cba634c2a3dba115f3fac3c4635a2199491
This attempts to hide inter-keystroke timings by sending interactive
traffic at fixed intervals (default: every 20ms) when there is only a
small amount of data being sent. It also sends fake "chaff" keystrokes
for a random interval after the last real keystroke. These are
controlled by a new ssh_config ObscureKeystrokeTiming keyword/
feedback/ok markus@
OpenBSD-Commit-ID: 02231ddd4f442212820976068c34a36e3c1b15be
multiplexed sessions to ignore SIGINT under some circumstances. Reported by /
feedback naddy@, ok dtucker@
OpenBSD-Commit-ID: 4d5c6c894664f50149153fd4764f21f43e7d7e5a
This checks via nlist(3) that candidate provider libraries contain one
of the symbols that we will require prior to dlopen(), which can cause
a number of side effects, including execution of constructors.
Feedback deraadt; ok markus
OpenBSD-Commit-ID: 1508a5fbd74e329e69a55b56c453c292029aefbe
SSH_TIME_T_MAX for this, so move from misc.c to misc.h so it's available.
Fixes a Coverity warning for 64bit time_t safety, ok djm@
OpenBSD-Commit-ID: c69c4c3152cdaab953706db4ccf4d5fd682f7d8d
sshd_config and sshd_config; previously if the same name was reused then the
last would win (which is the opposite to how the config is supposed to work).
While there, make the ssh_config parsing more like sshd_config.
bz3438, ok dtucker
OpenBSD-Commit-ID: 797909c1e0262c0d00e09280459d7ab00f18273b
~-prefixed paths, in particular ~user ones. Allows scp in sftp mode to accept
these paths, like scp in rcp mode does.
prompted by and much discussion deraadt@
ok markus@
OpenBSD-Commit-ID: 7d794def9e4de348e1e777f6030fc9bafdfff392
when it encounters an unquoted comment.
Add some additional utility function for working with argument
vectors, since we'll be switching to using them to parse
ssh/sshd_config shortly.
ok markus@ as part of a larger diff; tested in snaps
OpenBSD-Commit-ID: fd9c108cef2f713f24e3bc5848861d221bb3a1ac
handled specially by the protocol. Useful in ~/.ssh/config to set TERM to
something generic (e.g. "xterm" instead of "xterm-256color") for destinations
that lack terminfo entries. feedback and ok dtucker@
OpenBSD-Commit-ID: 38b1ef4d5bc159c7d9d589d05e3017433e2d5758
On platforms where sizeof(int) != sizeof(long), convtime could accept values
>MAX_INT which subsequently truncate when stored in an int during config
parsing. bz#3250, ok djm@
OpenBSD-Commit-ID: 8fc932683d6b4660d52f50911d62bd6639c5db31
make privilege dropping optional but allow it via callbacks (to avoid
need to link uidswap.c everywhere)
add some other flags (keep environment, disable strict path safety check)
that make this more useful for client-side use.
feedback & ok markus@
OpenBSD-Commit-ID: a80ea9fdcc156f1a18e9c166122c759fae1637bf
TCP connect. The connection phase of the SSH session is time-sensitive (due
to server side login grace periods) and is frequently interactive (e.g.
entering passwords). The ultimate interactive/bulk TOS/DSCP will be set after
authentication completes.
ok dtucker@
OpenBSD-Commit-ID: f31ab10d9233363a6d2c9996007083ba43a093f1
stdout and/or stderr to /dev/null. Factor all these out to a single
stdfd_devnull() function that allows selection of which of these to redirect.
ok markus@
OpenBSD-Commit-ID: 3033ba5a4c47cacfd5def020d42cabc52fad3099
environment variables on the client side. The supported keywords are
CertificateFile, ControlPath, IdentityAgent and IdentityFile, plus
LocalForward and RemoteForward when used for Unix domain socket paths. This
would for example allow forwarding of Unix domain socket paths that change at
runtime. bz#3140, ok djm@
OpenBSD-Commit-ID: a4a2e801fc2d4df2fe0e58f50d9c81b03822dffa
interval in a human- friendly format. Switch copyright for this file from BSD
to MIT to make it easier to add Henning's copyright for this function. ok
markus@
OpenBSD-Commit-ID: 414a831c662df7e68893e5233e86f2cac081ccf9
sigaction(2). This wrapper blocks all other signals during the handler
preventing races between handlers, and sets SA_RESTART which should reduce
the potential for short read/write operations.
OpenBSD-Commit-ID: 5e047663fd77a40d7b07bdabe68529df51fd2519
host/port was added in 2001 as an alternative to host:port syntax for
the benefit of IPv6 users. These days there are establised standards
for this like [::1]:22 and the slash syntax is easily mistaken for CIDR
notation, which OpenSSH now supports for some things. Remove the slash
notation from ListenAddress and PermitOpen. bz#2335, patch from jjelen
at redhat.com, ok markus@
OpenBSD-Commit-ID: fae5f4e23c51a368d6b2d98376069ac2b10ad4b7
ssh->kex and factor out the banner exchange. This eliminates some common code
from the client and server.
Also be more strict about handling \r characters - these should only
be accepted immediately before \n (pointed out by Jann Horn).
Inspired by a patch from Markus Schmidt.
(lots of) feedback and ok markus@
OpenBSD-Commit-ID: 1cc7885487a6754f63641d7d3279b0941890275b
written bytes before the initial timer check so that the first buffer written
is accounted. Set the threshold after which the timer is checked such that
the limit starts being computed as soon as possible, ie after the second
buffer is written. This prevents an initial burst of traffic and provides a
more accurate bandwidth limit. bz#2927, ok djm.
OpenBSD-Commit-ID: ff3ef76e4e43040ec198c2718d5682c36b255cb6
cannot be setuid and sshd always has privsep on, we can remove the uid checks
for low port binds and just let the system do the check. We leave a sanity
check for the !privsep case so long as the code is stil there. with & ok
djm@
OpenBSD-Commit-ID: 9535cfdbd1cd54486fdbedfaee44ce4367ec7ca0
environment variables for the remote session (subject to the server accepting
them)
refactor SendEnv to remove the arbitrary limit of variable names.
ok markus@
OpenBSD-Commit-ID: cfbb00d9b0e10c1ffff1d83424351fd961d1f2be
Replace atoi and strtol conversions for integer arguments
to config keywords with a checking wrapper around strtonum. This will
prevent and flag invalid and negative arguments to these keywords. ok djm@
OpenBSD-Commit-ID: 99ae3981f3d608a219ccb8d2fff635ae52c17998
Add monotime_ts and monotime_tv that return monotonic
timespec and timeval respectively. Replace calls to gettimeofday() in packet
timing with monotime_tv so that the callers will work over a clock step.
Should prevent integer overflow during clock steps reported by wangle6 at
huawei.com. "I like" markus@
OpenBSD-Commit-ID: 74d684264814ff806f197948b87aa732cb1b0b8a
add sshd_config RDomain keyword to place sshd and the
subsequent user session (including the shell and any TCP/IP forwardings) into
the specified rdomain(4)
ok markus@
Upstream-ID: be2358e86346b5cacf20d90f59f980b87d1af0f5
Add optional rdomain qualifier to sshd_config's
ListenAddress option to allow listening on a different rdomain(4), e.g.
ListenAddress 0.0.0.0 rdomain 4
Upstream-ID: 24b6622c376feeed9e9be8b9605e593695ac9091
Expose devices allocated for tun/tap forwarding.
At the client, the device may be obtained from a new %T expansion
for LocalCommand.
At the server, the allocated devices will be listed in a
SSH_TUNNEL variable exposed to the environment of any user sessions
started after the tunnel forwarding was established.
ok markus
Upstream-ID: e61e53f8ae80566e9ddc0d67a5df5bdf2f3c9f9e
Add URI support to ssh, sftp and scp. For example
ssh://user@host or sftp://user@host/path. The connection parameters
described in draft-ietf-secsh-scp-sftp-ssh-uri-04 are not implemented since
the ssh fingerprint format in the draft uses md5 with no way to specify the
hash function type. OK djm@
Upstream-ID: 4ba3768b662d6722de59e6ecb00abf2d4bf9cacc
add a "quiet" flag to exited_cleanly() that supresses
errors about exit status (failure due to signal is still reported)
Upstream-ID: db85c39c3aa08e6ff67fc1fb4ffa89f807a9d2f0
Move several subprocess-related functions from various
locations to misc.c. Extend subprocess() to offer a little more control over
stdio disposition.
feedback & ok dtucker@
Upstream-ID: 3573dd7109d13ef9bd3bed93a3deb170fbfce049
On startup, check to see if sshd is already daemonized
and if so, skip the call to daemon() and do not rewrite the PidFile. This
means that when sshd re-execs itself on SIGHUP the process ID will no longer
change. Should address bz#2641. ok djm@ markus@.
Upstream-ID: 5ea0355580056fb3b25c1fd6364307d9638a37b9
