this works by flagging the next barrier to use the current sample locations
so that everything works as expected during decompression
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11189>
The v_mbcnt instructions can take an extra source that they add to
the result. This is not exposed in SPIR-V but we now expose it in NIR.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Tony Wasserka <tony.wasserka@gmx.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11072>
According to feedback, the terminology with "exclusive scan"
and "reduction" is difficult. Change it to use "repack" instead,
which better fits what this sequence is actually used for.
The new sequence stores only 1 byte / wave to LDS, and uses packed
instructions to produce the results. This has lower latency and
fewer instructions than what we previously had.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Tony Wasserka <tony.wasserka@gmx.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11072>
When the result of these loads is only used by cross-lane instructions,
it is beneficial to use a VGPR destination. This is because this allows
to put the s_waitcnt further down, which decreases latency.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Tony Wasserka <tony.wasserka@gmx.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11072>
These map directly to v_perm_b32 and v_permlane_b32.
Unfortunately there is no corresponding NIR opcode or
intrinsics, and it's too tedious to puzzle these things
together from the existing NIR instructions.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Tony Wasserka <tony.wasserka@gmx.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11072>
Previously there hasn't been any validation for these instructions,
but after shooting myself in the leg with it a few times, I decided
to add the validation now.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Tony Wasserka <tony.wasserka@gmx.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11072>
Fix up the operand size for v_sad instructions, and implement
the new NIR horizontal add. There is no viable way to do this
in SALU, so let's always use a VGPR destination.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Tony Wasserka <tony.wasserka@gmx.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11072>
NIR currently doesn't have any intrinsics for a horizontal packed add,
so this one is modeled after AMD's v_sad_u8.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Tony Wasserka <tony.wasserka@gmx.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11072>
We tried to use this instruction for a more optimal sequence,
but it turned out that it doesn't exactly work as it was
supposed to. This note is to help others who want to use it.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Tony Wasserka <tony.wasserka@gmx.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11072>
As a result of some previous changes, it is now possible to expose ES
3.1 without having the ARB_shader_image_load_store enable set. However
we still want those other extensions. When there's a driver that's
capable of exposing ES 3.1 but not these extensions, more caps can be
added.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11204>
by initilizing variables up front and using actual draw structs for the
rewrite, a multidraw can be passed to the driver
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10966>
This allows partial writes and writes to the upper half of the destination.
fossil-db (Sienna Cichlid):
Totals from 135 (0.09% of 149839) affected shaders:
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11113>
Doesn't seem to create incorrect code, but it is suboptimal.
No fossil-db changes.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11113>
Previously, this could vectorize two scalar 16-bit loads into a u8vec4
load.
No fossil-db changes.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11113>
The robustness2 failures were a mistake because they are actually
not supported (no VK_EXT_scalar_block_layout on GFX6).
The sparse related failures are no longer supported since sparse
is only enabled for Polaris10+.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11243>
When the offset is negative, reg() isn't 255. Fix this by splitting
SGPR and literal emission. While we are at it, adjust a comment
saying that literals are also accepted on GFX6 which is wrong.
Fixes another batch of robustness tests.
Cc: 21.1 mesa-stable
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11247>
!11218 definitely didn't change anything about Zink that should make it
read black back from GLX. Assuming it's a race somewhere, just add it to
skips and move on.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11256>
The helpers will be reused for per-primitive variables that are also
arrayed, so use a more general name.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11252>
GFX6-7 are affected by a hw bug that prevents address clamping to work
correctly when the SGPR offset is used. Use the VGPR offset to fix it.
Fixes various hangs with dEQP-VK.robustness.robustness2.* on Bonaire.
Cc: 21.1 mesa-stable
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11238>
Warning from Gitlab:
This job is stuck because you don't have any active runners online or
available with any of these tags assigned to them: windows shell 1809
mesa
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11255>
At best, this is an extra instruction for NIR to optimize out. At worst,
depending on pass ordering nir_load_output could sneak into the final
NIR, even on drivers that don't support fbfetch.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11255>
If the tex/sfu ssa src is from a different block than the one currently
being scheduled, we do not have a valid sched-node. So fallback to
previous behavior rather than dereference an invalid ptr.
Fixes: 7821e5a3f8 ("ir3/sched: Don't penalize uses of already-waited tex/SFU")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10306>
