Right now, S3 always returns something, so we need to check
the content-type .
Acked-by: Emma Anholt <emma@anholt.net>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25606>
We are about to rename mupuf/valve-infra into gfx-ci/ci-tron.
While most resources will transparently be redirected, gitlab does
not allow us to keep our containers during the migration.
To work around that, I uploaded the current containers to Eric's fork
of valve-infra. Let's use these containers until the migration is over!
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25593>
This test checks the driver's reported conformance version against the
version of the CTS we're running. This check fails every few months
and everyone has to go and bump the number in every driver.
Running this check only makes sense while preparing a conformance
submission, so skip it in the regular CI.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25519>
1. Move block used for detecting R8152 problems to the bootloader
phase where it belongs. Also remove requirement to 100 failures and just
retry immediatelly.
2. Consider job failed after 10 errors, not 100. From the logs on
cheza-14, ~ 30 errors is enough to fail.
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25285>
crocus-hsw was failing because results.csv.zst was left around in the
results dir, and then zstd -o complained. We shouldn't be uploading stale
results files, anyway, so do an rm -rf first to clean up when the docker
container gets reused.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25509>
Build jobs should never take more than 1-3 minutes.
These jobs are never slow, either they finish within reasonable time or
something has gone wrong and the job will never terminate, so we should
instead timeout and retry.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24995>
Turns out I was right the first time, I was just missing that this
should only be done in MRs, which @daniels added in 16527f6ffd.
Without this, a "farm re-enable" pipeline will run all the jobs for that
farm, but will have none of the container & build jobs to support these
tests.
This reverts commit 1c3097225a.
Fixes: 1c3097225a ("ci: don't run everything just because a farm gets re-enabled")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25243>
since the dependencies were not locked, they got updated and generating
a new container is throwing errors like the following:
error: failed to compile `bindgen-cli v0.62.0`, intermediate artifacts can be found at `/tmp/cargo-installcP54m7`
Caused by:
package `memchr v2.6.3` cannot be built because it requires rustc 1.61 or newer, while the currently active rustc version is 1.60.0
rust packages have Cargo.lock file from when they were released, so add
--locked flag to use it.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25226>
Lists of files changed are only really relevant if we're pushing an MR.
We don't want to trigger 'user added .ci-farms-disabled/igalia' because
the user pushed a branch when this file was already present upstream.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25205>
If we have diverging rulesets, we can have the base container jobs
possibly not being created, and the leaf container jobs then trying to
run, which ends up in us failing to create pipelines.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25205>
This should help us handling possibly slower downloads of the traces,
which leads into piglit not printing anything on the output.
After Infra will get stabilized again, needs to be reverted.
Acked-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25097>
All -Wimplicit-const-int-float-conversion warnings are fixed and ci
can drop -Wno-error=implicit-const-int-float-conversion.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Acked-by: David Heidelberg <david.heidelberg@collabora.com>
Acked-by: Yonggang Luo <luoyonggang@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24362>
Both testsuites used to be executed separately because of spurious
failures/hangs but they seem fixed now.
GLCTS+GLES might be faster to run now.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25062>
Since Google Freedreno and Collabora farm definition split,
we don't need to check for runner tag.
Reported-by: Eric Engestrom <eric@igalia.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24961>
When the list of expected failures match, the job shouldn't fail.
This also adjusts the first error check to catch segfaults.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/25025>
strace output is only used for debug and its output takes too much
space. Remove it to save resources.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Reviewed-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Fixes: 7b51a583ed ("ci/android: add android to the ci")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24913>
At least these two can be easily used in bare-metal or Labgrid setups.
Currently I already have MR for implementing these for Labgrid.
Reviewed-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24665>
We don't need the path, not at all when we use external kernel.
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24646>
curl is already installed in these images, drop it.
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24646>
Arguments are parsed in order, so the `-c` here causes that first `--rm`
won't get applied and then it gets overriden by `-o` which writes the file.
Sadly zstd won't report this as a issue, but that's being reported in [1],
so maybe in future versions zstd will warn about it.
[1] https://github.com/facebook/zstd/issues/3719
Fixes: d110299d77 ("ci/deqp-runner: compress results.csv before uploading it to GitLab")
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24651>
Otherwise it gets run by default on newly pushed fork branch.
In general, this is copy-paste of `.container-rules`.
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24604>
Previous 45 minutes is too much.
- 5 - 15 minutes mesa LTO build
- 5 - 15 minutes shader-db run
Should be safe, in case something fails, we still can make another run.
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24607>
I've known about this for years and yet I still accidentally wrote a too
long tag.
Document this for myself next time, and for everyone else.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24560>
deqp is probably the biggest thing that we're building (definitely in
size of binary linked), so it's also the one that benefits the most from
using mold for linking.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24490>
All the users of the latter were already getting the former through
other rules so there's no functional change, but it's more correct.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24449>
10 is overkill, if we fail that many times in a row we should stop
trying on this runner.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24407>
They both take only a few seconds, but it can take up to a minute for
setting up the job, and various external factors such as network can add
delays, so let's round it up to a generous 10 minutes.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24431>
`rules:changes:compare_to` resolved firstly pushed branch pipelines,
which always evaluated `rules:changes` as true which breaks the workflow
Since we now explicitely say, that we compare against `main` repository,
GitLab can evaluate against real changes.
Fixes: 79f7882fc6 ("ci: add quirk for GitLab assuming changes is always true for scheduled runs")
Reviewed-by: Eric Engestrom <eric@igalia.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24305>
Modify the build process for the images to include the build to have ci-kdl
available in the Mesa jobs. Modify also the init-stage2 to launch in the
background the process that will collect data and store a json file with the
relative changes on the recorded data.
Signed-off-by: Sergi Blanch Torne <sergi.blanch.torne@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24177>
A tool to collect relative changes in some registers of sysfs can be used in
the Mesa jobs to record information while the tests are being executed.
Signed-off-by: Sergi Blanch Torne <sergi.blanch.torne@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24177>
Leaving it means it gets re-uploaded when sync'ing the artifacts back
from the DUT to GitLab.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Reviewed-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24196>
Otherwise, Marge queue has to wait for someone manually trigger it.
Fixes: d3b66356 ("ci/microsoft: partly revert rename from container-rules to manual-rules")
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24048>
Sadly GitLab CI always evaluate `rules:changes` as true, when running
scheduled runs. So we have to add explicit condition to ignore it there.
Every line using `rules:changes` has to have following condition
ignoring "schedule" runes.
Cc: mesa-stable
Reported-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24051>
This bring visible speedup while preparing the rootfs and containers.
Acked-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Acked-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24079>
This variable was removed on commit
848f59deda when file `create-rootfs.sh`
was splitted.
Re-add it.
This can make it more convenient for other projects to reuse these
scripts.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23894>
Suggested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Eric Engestrom <eric@igalia.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: David Heidelberg <david.heidelberg@collabora.com>
Acked-by: Jesse Natalie <jenatali@microsoft.com>
Acked-by: Christian Gmeiner <cgmeiner@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23774>
That file has become a bit of the new `.gitlab-ci.yml` with just about
everything in there, but a lot of its content doesn't need to be in the
same file anymore now that `!reference` exists.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24090>
- Drop now unused RUN_CMD_WRAPPER.
- Copy-paste Weston initiation code from init-stage2.sh with slightly adjustments.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24056>
Enable the latest changes with vrend-video
Change the default branch of virglrenderer to main as upstream did
Signed-off-by: Corentin Noël <corentin.noel@collabora.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24067>
Use a lightweight container for ping, ssh, curl and bash support.
Also use an image located at fd.o infrastructure, since we are having
some issues with Collabora's gitlab one lately.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23534>
- To keep things organized, create a base hidden jobs for alpine images,
as we have 2 now
- This image will have an SSH client ran by LAVA dispatchers
(x86_64-only) who will serve as a bypass channel of output and dmesg
and an alternative for UART.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23534>
Our LAVA farm is currently experiencing issues with running and pulling
docker. LAVA has been detecting (with a low rate) timeouts during these
commands, causing some jobs to fail with infrastructure errors.
Increasing the failure_retry will make the job retry run the container
when LAVA detects the failure without losing its place in the job queue.
We are currently investigating why docker times out. But, when LAVA
fails to detect it, we cancel the job on our side and resubmit it to the
job queue. For more information, please refer to following dashboard:
https://ci-stats-grafana.freedesktop.org/goto/VjZvaA_4z?orgId=1
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23534>
We're interested in a Vulkan-only stack in Chrome OS, where Android's GLES
would be provided by ANGLE-over-Venus-over-ANV. Let's get some testing
covering ANGLE-on-ANV first.
This is structured as a single partial job pre-merge to catch most
regressions, and a longer manual job to do full coverage for when you need
to update the xfails list.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20163>
We need to keep container job as a manual one, while others are always
disabled.
Fixes: c9de0d2977 ("ci/microsoft: rename manual rules according to rest introduced rules")
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23968>
When we enabling the farm again, we don't want to run all the manual
jobs again, since some of them may take more than 1 hour.
We just have to wait until the nightly run.
Reviewed-by: Eric Engestrom <eric@igalia.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23846>
There are two physical locations, so it makes sense to manage them
separately.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Acked-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23908>
DEBIAN_X86_64_TEST_IMAGE_PATH is unused and
DEBIAN_X86_TEST_IMAGE_GL_PATH doesn't even exist, so remove it to avoid
confusion.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23939>
farm rules are placed on test-source-dep.yml, so move it there.
This is also useful when trying to re-use the container/gitlab-ci.yml to
other workflows without running the jobs.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Acked-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23731>
The way it's used is unacceptable. Here's the change it suggested:
diff --git a/src/amd/vulkan/radv_device.c b/src/amd/vulkan/radv_device.c
index 05b9cb0a3f1..e58abfa885f 100644
--- a/src/amd/vulkan/radv_device.c
+++ b/src/amd/vulkan/radv_device.c
@@ -783,8 +783,7 @@ radv_CreateDevice(VkPhysicalDevice physicalDevice, const VkDeviceCreateInfo *pCr
device->overallocation_disallowed = overallocation_disallowed;
mtx_init(&device->overallocation_mutex, mtx_plain);
- if (physical_device->rad_info.register_shadowing_required ||
- device->instance->debug_flags & RADV_DEBUG_SHADOW_REGS)
+ if (physical_device->rad_info.register_shadowing_required || device->instance->debug_flags & RADV_DEBUG_SHADOW_REGS)
device->uses_shadow_regs = true;
/* Create one context per queue priority. */
This is the dumbest reason to prevent merging a MR. I don't want to see this
in projects I work on.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23687>
- Disable farm with `git mv .ci-farm{,-disabled}/$farm_name`.
- Re-enable farm with `git mv .ci-farm{-disabled,}/$farm_name`.
NEVER MIX FARM MAINTENANCE WITH ANY OTHER CHANGE IN THE SAME MERGE REQUEST!
Reviewed-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23629>
Reviewed-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23629>
Fixes: ae9c67d773 ("ci/amd: add radeonsi-raven-va-full job to cover all VA-API tests")
Reviewed-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23629>
Reviewed-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23629>
No functional changes intended, align with other farms.
Reviewed-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Jesse Natalie <jenatali@microsoft.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23629>
Only retry when there's some kind of non-job failure, such as
runner-internal issues, or API/network issues, etc. If the job itself
fails or times out, then given the length of these jobs, there's no
point trying again and just tying up the job slots for even more hours.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23108>
Having a high value for the first activity timeout made sense back in
the days when the machine may not be associated with salad early... but
this isn't the case anymore!
So let's go with a very conservative value of 2 minutes to boot :)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21730>
When we have many DUTs with the same tags (or subset of tags), it is
possible for the gitlab runner name not to match the DUT picked by
valve-infra's executor.
This is needlessly confusing, and prevents specifically tagging some
runners with a low-priority tag but still have these runners execute
high-priority jobs... because a low priority job may get started by
gitlab but the corresponding DUT is being used by a high-priority
task.
To fix this, simply tell the executor which DUT we want, not just the
list of tags we want.
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23548>
Since we use S3 artifacts for LAVA always, keep only one codepath.
Reviewed-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23527>
We don't use MINIO for a long time. Rename variable accordingly.
Reviewed-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23527>
Make the S3 (previously MINIO) artifacts clearly identifiable by glance.
Also now we fail before compilation, if the job doesn't define
the BUILDTYPE variable to prevent confusion.
Reviewed-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23527>
Fail when a job gets introduced without build type.
It should be explicitly stated what job uses.
Reviewed-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23527>
This should speed up job submission by 3 to 30 seconds depending on
the farm the machine is hosted in, and how busy it is.
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23361>
I want to have the possibility to use asan in for etnaviv ci. As lot
devices in the my CI farm are arm32 based lets do some prep work.
I had to skip the mesa:util suite as there are some asan problems
on 32bit platform with the hash_map. Once they got sorted out we can
enable the suite again.
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23493>
We not passing very long string, but multiple separate packages, using
the array seems to be more logical and clear solution, without
shellcheck complaining about word spliting and risk making of accidental
mistakes (missed backslash etc.).
Shebang change, because let's have it same everywhere.
Reviewed-by: Eric Engestrom <eric@igalia.com>
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23425>
Manual/post-merge for now because radeonsi isn't a priority for the few
steamdecks that we have in CI and we need to keep them free for merging
MRs.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22990>
Add a Mesa base style instead of copying the same rules multiple times.
This is especially annoying with foreach macros, where every
.clang-format file maintains it's own incomplete list of the same
macros.
Adding a tree wide .clang-format allows other drivers to derive their
code style from whatever is considered default Mesa style.
Since clang-format doesn't allow us to derive ForEachMacros, driver
specific foreach macros have to be added to the common file.
Having a tree wide clang format should also help (new) contributers with
working oin parts of the tree that don't have their own .clang-format
file. (With regards to code formatting)
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23275>
It is required for the automatic uprev of piglit in mesa to have the
"^zink-radv-.*-valve" jobs in the pipeline that checks an uprev candidate. So,
when there is a change in the file where the revision of piglit is set, those
jobs will be listed as manual.
Signed-off-by: Sergi Blanch Torne <sergi.blanch.torne@collabora.com>
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21193>
Already in hard-freeze, so we don't have to worry about breaking changes.
Significant changes:
- LLVM 15 is used instead of 11 or 13
- /dev/shm has to be manually mounted
- Debian 12 uses libdrm 2.4.114
- reworked creating of rootfs, from debootstrap to mmdebstrap
- split `create-rootfs.sh` into `lava_build.sh`, `setup-rootfs.sh`, and `strip-rootfs.sh`
- dropped winehq repository for now (Debian wine is up-to-date enough)
- we use wine now, no need to call explicitly call wine64
- bumped libasan from version 6 to 8
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21977>
We've been trying to get podman to output its progress while it downloads
images so that we don't think it's stuck, but until we manage to do that,
a longer timeout means fewer inaccurate timeouts.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23206>
Avoids this error:
./install/common/init-stage2.sh: line 130: /capture-devcoredump.sh: No such file or directory
One step closer to an error-free CI and being able to `set -e`.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Reviewed-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22992>
This brings a fix for the steam decks which may boot too fast sometimes,
and have the network adapter not being enumerated by the time it tries
to connect to the gateway...
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23170>
To ensure proper SSH functioning, the device IP should be added to the
LAVA device dictionary by setting device_ip. LAVA will then map the
value to lava-target-ip.
meson-g12b-a311d-khadas-vim3-cbg-4 has an IP in the dictionary, while
sun50i-h6-pine-h64-cbg-1 and meson-g12b-a311d-khadas-vim3-cbg-2 do not.
Since some devices are not yet properly configured, and device tag
fixing is not an option here, let's temporarily switch to a job
definition based on UART, until it gets fixed.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22870>
In some devices, it takes a few dozens of seconds to LAVA post process
the job and give final metadata related to the job.
It is worth to wait a little more (up to 30 sec) to make structured log
data more accurate.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22870>
Make hide_sensitive_data work in a block fashion, not only hiding the
JWT line, since these tokens are huge, it may break the line when it
extrapolates the YAML dump width.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22870>
Some LAVA signals have similar log outputs and the regex associated with
the log section may conflict. Use the policy of the first regex as the
chosen one, otherwise one line may produce two Gitlab sections in a row.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22870>
Test suite in the dut is just running SSH server and waiting for the
docker container to start the SSH session. So it can take all the test
cases accumulated duration, not just the init-stage1.sh part anymore.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22870>
To use the supported job definition depending on some Mesa CI job
characteristics.
The strategy here, is to use LAVA with a containerized SSH session to
follow the job output, escaping from dumping data to the UART, which
proves to be error prone in some devices.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22870>
Create a separate job definition that runs the job via SSH session.
The DUT test only sets up the SSH server via dropbear, and another
deployed docker runner in LAVA dispatcher access the DUT via SSH with
pseudo-terminal to propagate the logs in real time.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22870>
We need SSH servers running inside the DUTs to establish a new channel
of communication between LAVA dispatcher and the DUT, to be able to
workaround UART hanging issue that are occurring in some chromeos
devices.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22870>
Add absolute path for:
- zramctl, maybe `/sbin/` is not in the PATH
- intel-gpu-freq.sh, as this script CWD may be run outside `/`
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22870>
