This will be used to test llvmpipe against Xvfb and freedreno against
Xorg. We keep the core deqp testing on surfaceless because
--deqp-surface-type=pbuffer fails on x11_egl_glx, =fbo has never worked in
VK-GL-CTS, and =window would increase test runtime for all the
swapbuffers.
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10240>
For baremetal CI we are using a 'dummy' rootfs as it is required by
abootimg. This causes NFS boot problems when using u-boot as bootloader.
[ 13.230968] RAMDISK: gzip image found at block 0
[ 13.235645] using deprecated initrd support, will be removed in 2021.
[ 13.243106] List of all partitions:
If we disable CONFIG_BLK_DEV_INITRD nfsroot works.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10024>
This is possible again thanks to
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9955 , and
this MR requires rebuilding all templates based docker images anyway,
so we can pull in the latest templates for free.
We need to exclude /dev/* when unpacking rootfs tarballs for the
arm_test image, since x86 container build jobs do not allow mknod
anymore with current templates. The baremetal test jobs have another
filesystem mounted on /dev anyway.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9833>
Among other things, this gets us GCC 10 (was 6).
Requires some changes to third party components we use:
* Install apitrace (& waffle) from Debian; was hitting issues with the
local build, and it's the same version 9.0 anyway.
* Update Fossilize to a newer commit which builds with GCC 10.
* apt.llvm.org repositories are no longer needed.
* Use an SPIRV-LLVM-Translator commit which builds with LLVM 11.0.1.
* Install XCB packages from Debian, 1.13 fails to build with Python 3.9.
* Install wayland-protocols from Debian, 1.12 is too old for
libgtk-3-dev in bullseye.
LLVM 7/8 packages are no longer available.
Also adapt expected test results to Xvfb now exposing multi-samle
GLXFBConfigs.
v2:
* Install clang instead of clang-11.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3124
Reviewed-by: Eric Anholt <eric@anholt.net> # v1
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9833>
v2:
- Bump up MESA_ROOTFS_TAG instead of arm_build (Michel)
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10136>
So far we were using a telnet-based script to communicate with the PoE
Switch to turn on/off the network ports the DUTs are connected.
But this script does not seem very reliable because from time to time the
switch fails to execute the steps in the script.
As the PoE Switch we use is a smart one with support for SNMP protocol,
it would be easier to use it to handle it, which allows to turn on/off
the ports without going through the nasty telnet steps
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9954>
libpciaccess-dev:$arch from STABLE_EPHEMERAL down to the main list of packages
in .gitlab-ci/container/cross_build.sh, and bumping the arm_build, i386_build,
ppc64el_build & s390x_build tags again.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
----
.gitlab-ci.yml | 8 ++++----
.gitlab-ci/container/cross_build.sh | 2 +-
2 files changed, 5 insertions(+), 5 deletions(-)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10095>
This allows to fix some credential leaks and provides compatibility with
the latest LAVA version.
Avoids failures when the LAVA instance returns Error 500
Signed-off-by: Corentin Noël <corentin.noel@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9851>
Works around the other Missing case we've seen in CI, possibly fixes the
underlying issue, and adds support for comments in xfails lists.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9806>
The merged image contains kernels & rootfs for both arm64 & armhf
baremetal test jobs, and is smaller than either arm{64,hf}_test image
before.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9955>
Doing so in an x86 container via qemu was slow, and started failing
recently after updating to a newer qemu version.
This also results in smaller arm*_test* docker images, since we need to
install fewer Debian packages in them.
As a bonus, this turns some piglit tests from fail to pass (Or maybe
they'll turn out to be flakes? They've passed at least 3 times in a
row).
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9955>
We use the CI-built kernel+rootfs these days. I haven't bumped image tags
because the files are definitely unused, and I'm rebuilding it all in the
next commit.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9955>
Waffle building requires libgl1-mesa-dev to add support for GLX. This
package is pulled automatically in arm64 container as a suggested
package, but no in armhf. Which means we end up having support for GLX
in waffle in arm64 but not in armhf.
Thus let's install explicitly this package to have support in both
cases.
Reviewed-by: Andres Gomez <agomez@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9562>
This adds a piglit runner that we'll be using on freedreno, better
xfail/unexpectedpass handling for some cases (Missing->Pass, Warn->Warn),
better error logging for the Missing issue we've had in CI, a fix for a
source of Missing, and a pile more unit tests.
As a result, we now catch that the Missing results for a bunch of our
tests have gone away.
Reviewed-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9468>
Build deqp-runner with the `--locked` option to use dependencies
versions specified in `Cargo.lock`.
v2: Bump image tags.
Signed-off-by: Antonio Caggiano <antonio.caggiano@collabora.com>
Suggested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9368>
On top of the last kernel tree I added a couple of DT changes for db820c
from the qcom landing tree necessary for bringing up the GPU, and a fix to
my OOB cleanups fro cheza. I also enabled the CPU clock driver for db820c
so we can turn on SMP and not leave jobs stranded on a 19Mhz CPU or whatever.
This causes us to need a bit of updating of our TF expectations since the
order of jobs changes a bit.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9144>
We have to disable the GLSL unit tests because with asan it runs way too
much code under qemu and times out. Those unit tests have coverage on
x86, anyway.
I also included a vulkan run, which is disabled by default due to timeouts
that I need to sort out still. It should be a useful tool for turnip
devs, though.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9070>
https://github.com/LunarG/gfxreconstruct/issues/328 and
https://github.com/LunarG/gfxreconstruct/issues/402 are already fixed
in the "master" branch.
Updated the piglit version so it supports this version.
Additionally, LunarG's VulkanTools are not built any more since
GFXReconstruct is now able to generate screenshots on its own without
using the VK_LAYER_LUNARG_screenshot layer.
v2:
- Explain the VulkanTools removal in the commit log (Martin).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9032>
For imx6 we need the following fec ethernet fix:
c730ab423bfa ("net: fec: Fix temporary RMII clock reset on link up")
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9046>
This new version contains several fixes.
v2:
- Bump lava kernel+rootfs tag (Eric)
v3:
- Drop {x86,arm}_test-base tag bumps (Michel)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8990>
In the next commit, we'll start building Zink in the meson-testing step,
and because mega-drivers end up stuffing all dependencies in the same
shared-object, we end up requiring libvulkan for other drivers as well.
So let's no longer track separately who needs vulkan and who doesn't,
and just always install it.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8879>
To be more consistent and to declutter the .gitlab-ci dir.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8757>
This will hopefully give us more information about why some tests are
intermittently timing out.
Only in build jobs using the x86_build docker image for now, since
those are where we're currently seeing most such timeouts. But may
expand this later if it provides the expected benefits.
v2:
* Add comment about why we test for and use /usr/bin/time explicitly.
Acked-by: Eric Engestrom <eric@engestrom.ch> # v1
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8776>
The dr_mode hack is now folded into the git tree. The uprev brings in a
shrinker fix for msm and a fix for the GPU_SET OOB messages on cheza
(possibly involved in piglit flakes).
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8768>
This should help us avoid landing memory leaks (and some buffer overflows)
throughout the GL stack. I put the asan lib in x86_test-base because
we'll want asan for lavapipe, too.
This requires keeping debug symbols for the asan drivers in the artifacts,
as otherwise you can't do much with the backtraces it produces.
Closes: #3726
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8530>
Replace the expect-based script to turn on/off the Raspberry Pi devices
using a python-based script.
v2:
- Fix small nitpicks (Juan)
- Limit line length (Andres)
v3:
- Bump image tags (Eric, Andres)
v4:
- Bump image tags (Eric)
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Acked-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8362>
This is mostly to get additional -Werror coverage to avoid introducing
unforced ILP32 or big-endian errors. i386 adds lavapipe, r600, nouveau,
zink, and all the classic drivers. ppc64le adds lavapipe and zink, and
also adds -Werror for symmetry with the other cross builds. s390x also
adds lavapipe and zink.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8394>
ARM64 had it for traces only, upgrade it to a full build so we can test
a630. We also add it for armhf, as we'll want it on both rpi and etnaviv.
Bumped the LAVA tag as well, since the script changes a bit and it does
impact the final image (even if we aren't pulling in full piglit there
yet). Note I also had to drop the "v" on the tarring of their rootfs, as
the verbosity on baremetal was exceeding job log size.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7370>
The STRIP_CMD env var is used in several build scripts, not just by
dEQP.
Also, we want to have the rootfs destination directory created so it
also exists for builds that only move directory trees in there.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
v2:
- Update tag for the android_build image (Michel).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> [v1]
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
The -S and -B flags were officially introduced in CMake 3.13.
Avoids the following warning:
"
CMake Warning:
No source or binary directory provided. Both will be assumed to be the
same as the current working directory, but note that this warning will
become a fatal error in future CMake releases.
"
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6388>
I want to enable ASan runs on freedreno. It turns out it's a long road to
get there, starting with making sure we can run our unit tests with the
sanitizer enabled.
While I'm revving this container, add in valgrind too to make sure that
our build paths with valgrind enabled work.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7936>
Require libwayland 1.18 and remove the workaround for
WL_SHM_FORMAT_{A,X}BGR16161616F.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7771>
This tests OpenGL ES 2.0 CTS suite with VC4 drivers, through baremetal
Raspberry Pi 3 devices.
The devices are connected to a switch that supports Power over Ethernet
(PoE), so the devices can be started/stopped through the switch, and
also to a host that runs the GitLab runner through serial-to-USB cables,
to monitor the devices to know when the testing finishes.
The Raspberries uses a network boot, using NFS and TFTP. For the root
filesystem, they use the one created in the armhf container. For the
kernel/modules case, this is handled externally. Currently it is using
the same kernel/modules that come with the Raspberry Pi OS. In future we
could build them in the same armhf container.
At this moment we only test armhf architecture, as this is the default
one suggested by the Raspberry Pi Foundation. In future we could also
add testing for arm64 architecture.
Finally, for the very rare ocassions where the Raspberry Pi 3 device is
booted but no data is received, it retries the testing for a second
time, powering off and on the device in the process.
v2:
- Remove commit that exists capture devcoredump (Eric)
- Squash remaining commits in one (Andres)
v3:
- Add missing boot timeout check (Juan)
v4:
- Use locks when running the PoE on/off script (Eric)
- Use a timeout for serial read (Eric)
v5:
- Rename stage to "raspberrypi" (Eric)
- Bump up arm64_test tag (Eric)
v6:
- Make serial buffer timeout optional (Juan)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7628>
Seems some sort of linux change (bugfix?) resulted in the db410cs
selecting device mode for the db410cs due to the micro cable being
plugged in (fastboot runs them in device mode), so we weren't finding
the network and getting artifacts out.
Closes: #3728
Acked-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6971>
The recent change to install kernel modules for AMD included a sed job to
disable kernel modules in the defconfig. This somehow broke booting on
a307, except the commit failed to bump the arm64_test tag so it wasn't
noticed until the next uprev. (I didn't notice when landing the next
change to that container to add the deqp runner, because I didn't get a
git conflict on rebasing my tag bump so I didn't bump the tag again to
pull in the kernel changes and catch the fail).
I've spent a while trying to debug what's happened (including what
*should* be a replication of the kernel build on my local db410c) and come
up empty. Just punt and disable the AMD kernel module changes on
baremetal to fix it. Bump every container using lava_build.sh to make
sure we don't screw anything up with the script changes.
Fixes: 60c5729d16 ("ci: Distribute ADMGPU driver to LAVA as a module")
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6971>
I found the C++ runner hard to develop on, and we had stability issues and
outstanding feature needs that made me want something I felt good about
hacking on. Thus, Rewrite It In Rust of the deqp runner.
The new runner includes:
- Skip lists don't reshuffle the test list.
- Known-flake handling without resorting to skip lists (fixing our main CI
reliability issue on a3xx right now).
- Per-thread Vulkan shader caches should speed up VK CI runtime.
- Tracking of crashes separate from fails (so we can see progress on that
front).
- Logging of deqp stderr spam (particularly assertion failures!) in the CI
log.
- Integrated QPA filtering so we don't have bash perf issues for it.
- Logging of what caselist to go look at for a given error report (in red,
so it's easier to find in your CI log).
- The code is 1/3 unit tests, and easy to extend for more coverage.
- Non-LAVA CI runs create a failures.csv in artifacts that you can check
in as your deqp-*-fails.txt file.
- Test runtime is included in results.csv so you can debug how to speed up
your CI job.
- Pretty summary at the end of the run of slow/flaky/failed tests.
Since this is a new runner with a different RNG, the test groups are
shuffled one more time. This seems to result in some panfrost T720
stability issues (See its new deqp-panfrost-t720-flakes.txt), and one new
flake in freedreno a630.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7434>
As it needs firmware to probe, and we cannot bundle it within the kernel
image because it is incompatible with the GPL.
Currently we rebind the driver after boot but that's slow and fragile,
as unloads of DRM drivers aren't generally tested.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7420>
To support Android drivers, we're going to want to be tracking that Mesa's
build succeeds on a real android toolchain. This still uses the android
stubs since these libs aren't in the NDK.
Note that I had to drop the Intel and AMD drivers currently: we don't have
LLVM cross-compiled for Android in this container, and I'm honestly hoping
ACO saves us from that. Intel has dependencies on libexpat, which AOSP
really doesn't want to bring in, and it looks to me like those dependencies
could be optional.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6700>
This causes a lot of hiccups on the CL tests, but I've got most of
them fixed in another MR in pieces.
This should at least give a much more realistic baseline.
v2: use script in both places
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7073>
Update to v5.9-rc5-based drm-misc-for-next, so we can run jobs on
machines with Bifrost GPUs.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7011>
This adds support for building clover/llvmpipe and running the
piglit CL tests on it.
It uses the gl testing container, and add builds the libclc
spirv libraries as part of that which requires the llvm spirv
translator in the build container.
It also builds the llvm spirv translator as part of the build
root and creates a mesa build that builds clover for testing
against it. It uses llvm 10 as the baseline.
This drops bswap as it has an oob memory access with llvmpipe
which cause flaky test results. phatk also seems flaky
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6901>
I'd like to see this new non-UAPI feature bake in CI. More importantly,
it may prevent some classes of flakes on cheza by isolating the processes
on the GPU so that a fault in one doesn't stomp over memory in another.
I've also pulled in a fix that etnaviv needed for their upcoming CI.
We add a few more kernel options while uprevving:
- More interconnect drivers for getting good GPU perf
- PRNG so that we don't get late-in-boot complaints about randomness.
- db820c's power domains and ethernet so hopefully we can switch to this
upstream kernel
This seems to slightly change the flakes happening in bypass mode, so add
them to the list.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6592>
There's no need to have separate build scripts here, just choose what the
DEQP_TARGET is for the particular container being built. This brings in a
tremendous number of GLES test fixes that haven't made it into a tagged
gles CTS release.
Closes: #2056
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6526>
Debian defaults to bfd, which is comically slow. We can't use lld because
the old version we have in the debian stable we use has various bugs.
This required bumping libwayland, which had multiply-defined symbols
issues in the previous release.
Closes: #3236
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6324>
ccache is installed as ephemeral. Hence, the build will fail if used
by the post_build script after removing it.
This reverts commit 40ab6d77c0.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6391>
And remove a redundant call to ccache --show-stats
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6343>
https://github.com/KhronosGroup/EGL-Registry/pull/95 has moved
a couple of extensions defines and functions to the upstream `eglext.h`,
but when 9a74746bd1 sync'ed these files we broke compilation
of apps that require these symbols on systems that don't have the
updated Khronos headers.
On non-GLVND builds, we still provide these headers, so everything's
fine, but on GLVND builds the Khronos headers are external so we need to
make sure we have a libglvnd version that's recent enough.
Fixes: 9a74746bd1 ("EGL: sync headers with Khronos")
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6069>
We anyway depend already on robust network support in the DUTs, and we
can save quite some time this way.
It will also allow us to grow further as we expand coverage.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-By: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6114>
Some changes unintendedly slipped into an unrelated commit before it was
merged.
This caused kernel modules to be built and installed in the ramdisk,
which caused some devices to fail to boot due to the ramdisk size limit
being surpassed.
These changes weren't in effect until a subsequent commit triggered a
rebuild of the ramdisks.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Fixes: a9560939e0 ("ci: Build-test Panfrost tools")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6167>
Now that we have MinIO, we can distribute traces better than by direct
downloads from git.
With a caching MinIO instance local to the DUT, total run times should
be noticeably impacted.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6136>
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Daniel Schürmann <daniel@schuermann.dev>
Acked-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3521>
For testing Mesa on LAVA devices with the amd64 architecture, build
kernels and rootfs in the same way as we do for arm64 and armhf.
Also add a few trivial jobs for a specific AMD Chromebook.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5903>
As we are doing that in several places already and we'll need to build
in others as well.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5903>
master-tot doesn't have that zip file any more, but the just made
release still does.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5903>
This also tunes `.freedreno-rules` a bit so that it isn't triggered by
various tools that don't effect the driver build.
The .gitlab-ci directory is kept separate from the toplevel one so that
updates to (for example) reference decode output do not trigger all the
other-driver jobs to run.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6070>
Upload failed images and the results.yml file to MinIO, to facilitate
debugging.
Also, fix version checking when git is installed as Mesa is going to
output a different renderer string if git is installed.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-By: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5472>
fd.o has retuned the x86 runners on packet for -j8. Rather than having to
tweak our CI every time fd.o decides to rebalance job concurrency, respect
what the runner admin has chosen for their builds (this will also be
convenient for people with large local runners).
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5669>
I mistakenly removed what I thought were remnants of when Freedreno used
LAVA for their DUTs. lava_arm.sh is used for baremetal, so re-add that
code.
Fixes: dcd171f5e9 ("gitlab-ci: More stable URL for kernel and ramdisk artifacts, for LAVA")
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5839>
Since version 2.4.101 there are only xz archives hence the bz2 to xz
change.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5906>
Since version 2.4.101 there are only xz archives hence the bz2 to xz
change.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4580>
Place the kernel and ramdisk into a place in the file server so the URL
will only change when the contents also change.
Also put the Mesa build into a separate tarball so the ramdisk's
contents don't change every build.
With proper caching in place, all devices in the same farm need only to
download the mesa tarball once, saving time.
As we switch to MinIO for making kernels and rootfs available to LAVA
devices, we can stop using Docker to distribute them.
Instead, build when needed in separate jobs that push directly to MinIO,
from where LAVA devices can download them.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5515>
Builds the renderdoc and apitrace programs so we can replay GL traces on
DUTs.
[Separated out from 5472's commit that also enabled the jobs in LAVA,
dropped unnecessary python packages from arm_build, fixed up arm64_test
build, traces-db in baremetal, new commit message by anholt]
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5433>
We build in Debian buster but were currently testing in bullseye-based
ramdisks. This has started being a problem since Python 3.7 was removed
from bullseye.
[ Also bumped arm_test containers, by anholt ]
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5433>
rm -rf and then copying over all the contents again is a waste of time
when we'll almost always be using the same rootfs. Saves about 30s of job
time.
Closes: #3065
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5266>
I'm going to enable the VK CTS on cheza, so swap the deqp we have in the
container. build-deqp-vk already included GLES deqp binaries and data,
and is a newer branch than the last opengl-es-cts tag.
This brings a few things back over from build-deqp-gl for testlog
extraction, and copyes out the GLES mustpass lists.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5266>
Using arm_test-base as a separate base layer as well for storage &
network bandwidth efficiency.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5381>
Using x86_build-base as a separate base layer as well for storage &
network bandwidth efficiency.
Using separate images allows dropping the workarounds from the cross
build job scripts.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5296>
And python3-distutils back to x86_test-gl's list.
These are not used for building Mesa, only for other components used in
test jobs.
This partially reverts commit c1a290bdd5
"meson: Bump required version to 0.52.0".
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5296>
They're available in Debian 9 (stretch) as well.
This will avoid conflicts with packages from Debian testing.
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5296>
This gets us back to the behavior we used to have for freedreno: clicking
play on arm_test gets you testing of the ARM platforms that aren't under
arm-build (the LAVA runners).
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5247>
This is a set of kernel options I've come up with mostly cribbing from
chrome os's kernel config snippet. We also build an lzma kernel, as
uncompressed kernel is big but lzma is the only compression supported by
the bootloader. With that image, we have to pack it into a FIT formatted
image+dtb blob.
CONFIG_SUNRPC_DEBUG is added so that you can set "nfsrootdebug" to figure
out what's going wrong with your nfs mount (mine were "both the tcp and
nfsvers options were required, and don't try to use 'default' as the root
path to defer to DHCP's answer because otherwise you get
/tftpboot/default, just use an empty root path which doesn't prepend
/tftpboot.")
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5247>
Making use of the relatively recent FDO_BASE_IMAGE feature of the
templates, the x86_test-base image contents are shared as a separate
layer by the x86_test-gl/vk images (meaning the former only needs to be
downloaded once for either or both of the latter). This should be more
efficient in terms of overall network bandwidth and storage, in
particular if the base image changes less often than the -gl/vk ones.
v2:
* List x86_test-base in needs: along with x86_test-gl/vk (see parent
commit)
* Always put $STABLE/TESTING_EPHEMERAL on separate lines, will make it
easier to add any non-ephemeral packages
Reviewed-by: Eric Anholt <eric@anholt.net> # v1
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5186>
The runner is an x86 system, so running the ARM image meant doing
everything at runtime under qemu, and for the xz of the test rootfs that
was quite expensive. Also, we can rebuild x86 images much faster than we
can rebuild arm images for container development, which will help unblock
some of the other feature parity work I have to do versus the old docker
system that cheza is using.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5033>
This adds a few more variables that we found we needed for x86-to-arm dEQP
cross builds. Also note that we're now fixed to use ccache in the dEQP
builds.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5033>
The x86 baremetal build would have an armhf cross file, and need the
kernel env setup.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5033>
We're going to do this in another container soon, and it would also be
nice to consolidate cmake cross setup.
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5033>
v2: Verbatim translation from the original shell script
Make the corrections visible in explicit commits (Andres)
Remove redundant code (Alexandros)
Code style nitpick (Rohan)
Reimplementation of the tracie's self-tests using a pythonic test suit
(pytest).
The new tracie/test.py module is almost a direct translation of the
tests defined in the tracie/test.sh. This new implementation of the
test provides a more common framework where define the tests.
Also allows a better introspection for the tests results and/or
resulting errors.
This patch also adds python3-pytest as dependency for the built images
and adapts the tracie-runner scripts to run the self-test using pytest.
Signed-off-by: Pablo Saavedra <psaavedra@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com> [v1]
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com> [v1]
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4916>
mingw-w64 pulls in a lot more packages we don't need.
g++-mingw-w64-x86-64-win32 is only available in Debian testing, so get
all mingw packages from there.
Acked-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4851>
Instead of a third-party repository which has proved unreliable at
times.
This pulls in glibc 2.30 from testing in the x86_build image, so we need
to update the x86_test-{gl,vk} images to match.
Acked-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4851>
We don't want LLVM 8 packages to be pulled in from testing though (it
would make installing llvm-8-dev for cross architectures a lot more
complicated), so explicitly select buster-backports for them (they were
already implicitly installed from there before, since they're not
available in buster proper).
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4851>
Additionally, purge the winehq-stable package and its dependencies to
avoid crashing when building for s390x.
v2:
- Remove winehq-stable and dependencies for s390x.
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2657
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Daniel Stone <daniels@collabora.com> [v1]
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4678>
Add virglrenderer to the container and use the vtest transport to test
the Gallium driver. On the "host", llvmpipe is used.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4433>
Verify that the Mesa version used when running tracie tests is the
one that was built by CI, rather than any installed distro version.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3894>
Our shared runners are set up for concurrent jobs ~= CPUs / 4 (x86) or 8
(ARM). If you use more build processes than that, then jobs may be
fighting each other for shared system resources, possibly to the point of
failure (we've seen one of the runners OOM on some jobs before, though I'm
not sure if this was the cause).
To try to systematically prevent the problem, we make a ninja wrapper in
the containers that passes the -j flags, and set MAKEFLAGS in the
container builds. This doesn't cover make in non-container builds, but I
believe we don't have any of those.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3782>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3782>
In preparation for having automated testing with DXGI traces.
v2:
- Updated DXVK version.
- Merged the new Wine container into the existing Vulkan
one (Michel).
v3:
- Updated commit log.
- Use a particular known-good apitrace version (Alexandros).
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
The backports repository can be temporarily inconsistent between
architectures, which can break the docker image build.
Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4238>
After 90a39af5f6 ("ci: Drop the git dependency in tracie"), we have
this error in the radv-polaris10-traces job:
"
...
+ /builds/tanty/mesa/artifacts/tracie/tests/test.sh
tracie_succeeds_if_all_images_match: Fail
Traceback (most recent call last):
File "/tmp/tracie.test.glY0O23HJo/tracie.py", line 6, in <module>
import requests
ModuleNotFoundError: No module named 'requests'
...
"
v2:
- Updated commit log to be more descriptive (Michel).
Fixes: 90a39af5f6 ("ci: Drop the git dependency in tracie")
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4237>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4237>
Following on from the db410c conversion to baremetal testing, reuse the
same scripts in the same rack to run 7 db820c boards (#4/8 is failing in
the bootloader for unknown reasons).
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4177>
This should reduce our container rebuild times, particularly on the
40-minute ARM build (which is split across only 2 runners and thus likely
to have a hot cache) when working on updating containers.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4099>
Instead of using git, use python and the Gitlab API
to fetch traces. This helps us slim down our ramdisks
in preparation for integrating trace replay on LAVA
devices.
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4000>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4000>
This supports powering up the device (using an external tool you
provide based on your particular lab), talking over serial to wait for
the fastboot prompt, and then booting a fastboot image on a target
device.
I was previously relying on LAVA for this, but that ran afoul of
corporate policies related to the AGPL. However, LAVA wasn't doing
too much for us, given that gitlab already has a job scheduler and
tagging and runners. We were spending a lot of engineering on making
the two systems match up, when we can just have gitlab do it directly.
Lightly-reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4076>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
It was added with tracie, but it doesn't depend on it.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
In preparation for having automated testing with Vulkan traces.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
In preparation for having automated testing with Vulkan traces.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
I'm working on moving the db410c CI from docker to LAVA, which means we
get to boot a custom kernel. To do that, we need to enable ARCH_QCOM in
the kernel, save the dtb around, and include abootimg in our container so
that we can generate combined kernel/dtb/ramdisk images for fastboot.
LAVA's fastboot support is unable to pack the overlay into an abootimg
image, just a cpio rootfs. We could flash the cpio rootfs after overlay
addition, but that takes 2 minutes to do, and causes wear on the devices.
Instead, we'll bring up the network at boot and use wget to fetch the
overlay. We'll want network support anyway, so that we can transfer the
failure xmls back to the gitlab job's artifacts at some point.
Since the msm GPU and realtek network firmware increase our payload by
3MB, add in firmware compression so that it doesn't waste as much RAM on
devices not using it.
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3928>
Introduce automated testing of Mesa by replaying traces with Renderdoc
or Apitrace.
For now only LLVMPipe is tested, but other drivers can be tested if
there's runners with the necessary hardware.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2935>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2935>
Using LLVM 8 for ppc64el and 7 for s390x (which hits some coroutine
related issues with LLVM 8).
There are some test failures we need to ignore for now. Also, the
timeout needs to be bumped from the default 30s for some tests, because
they can take longer under emulation.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3643>
The motivation for this is that we want to make use of the meson cross
files in this script, which have the ccache compiler paths.
We need to remove the ccache directory at the end, it would just waste
space in the image for no benefit.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3643>
Use the normal build job to also prepare the artifacts for LAVA jobs.
For that, the build container needs to also build the test suites,
kernel, ramdisk, etc.
Then the build job will place the just-built Mesa in the ramdisk and the
test job can generate a LAVA job and point to those artifacts.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3295>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3295>
They're not available for Debian buster yet, so we have to use upstream
snapshot packages again.
In contrast to earlier, we now store the LLVM APT repository key in Git
instead of re-downloading it every time.
Take one step towards sharing code between the LAVA and non-LAVA jobs,
with the goals of reducing maintenance burden and use of computational
resources.
The env var DEQP_NO_SAVE_RESULTS allows us to skip the procesing of the
XML result files, which can take a long time and is not useful in the
LAVA case as we are not uploading artifacts anywhere at the moment.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This requires to bump LLVM to 8 because it's the minimum supported
version by RADV.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
If there are a small number of fails, re-run to determine if they are
flakes, and optionally (if `$FLAKES_CHANNEL` configured) report the
flakes.
This way flakes don't interfere with developers working on other
drivers, but get logged so that the developers working on the flaking
driver can monitor the situation.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Cleans up .gitlab-ci/ a little, and allows using a single DEBIAN_EXEC
line for all container jobs.
v2:
* Use lava_arm.sh instead of arm_lava.sh for consistency with v2 of the
previous change
Reviewed-by: Eric Anholt <eric@anholt.net> # v1
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
