Several extensions were unsorted in
anv_physical_device.c:get_device_extensions().
The worse was an EXT found between INTEL/NV.
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32205>
glsl ir creates these temps to copy global initialiser values for
example. To avoid collisions during linking due to 2 shaders in the same
stage having temps with the same name we make sure to define these as
function variables not shader globals. This will put the temps into the
global instructions wrapper created in 7c5b21c032.
Fixes: cbfc225e2b ("glsl: switch to a full nir based linker")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12136
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32202>
This will need to be set to true when the GLSL linker lowers IO, which
can later be unlowered by st/mesa, and then drivers can lower it again
without load_interpolated_input. Therefore, it can't be a global
immutable option.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Georg Lehmann <dadschoorse@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32229>
This is to match the code names used in other enums.
Also add comments to separate GFX11.5 and GFX12 chips.
v2 by Marek Olšák:
- Rename GFX1103 to in addrlib also
- Rework ac_get_family_name
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32170>
No functional change, just move i915 specific data to a struct
and check for kmd_type where appropriate. This will make the
next patch (which adds Xe KMD support here) cleaner.
This patch had to make intel_kmd.h header C++ friendly so it
can use its symbols.
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32194>
vk_common_*Wait* calls vk_device_check_status to detect device lost.
This allows device lost to be reported more timely.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32166>
When PANVK_DEBUG=sync detects a failed job, report queue lost
immediately.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32166>
deqp-runner version is 0.20.2 already. But we would like to keep
MESA_VK_ABORT_ON_DEVICE_LOSS globally because, without it, after the
first VK_ERROR_DEVICE_LOST in a test group, the error is sticky and the
remaining tests will be considered failed as well.
deqp-vk gained --deqp-terminate-on-device-lost since 1.3.8.0 and enabled
it by default since 1.3.10.0. But let's prefer our own mechanism.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32228>
The meaning is negated.
This NIR option is deprecated and shouldn't be used. It means any IO
optimizations can be disabled and it's a currently a workaround for zink,
which is the only driver that asks for it by default. The original option
is replaced by an environment variable for the GLSL linker.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32173>
Make sure the sysval is pushed.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32203>
These are not necessary because __node is only a single token. The
variable declaration wouldn't work otherwise.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32225>
If we have NIR such as:
32x4 %48 = @load_vulkan_descriptor (%47) (desc_type=SSBO)
32x4 %76 = deref_cast (tint_symbol_11 *)%48 (ssbo tint_symbol_11) (ptr_stride=0, align_mul=4, align_offset=0)
32x4 %77 = deref_struct &%76->tint_symbol_10 (ssbo int) // &((tint_symbol_11 *)%48)->tint_symbol_10
A single nir_rematerialize_deref_in_use_blocks() will rematerialize the
deref_struct and then it's deref_cast. However,
nir_foreach_instr_reverse_safe is not safe if the next iteration's
instruction is removed. This can result in the instruction loop exiting
and the load_vulkan_descriptor never having an LCSSA phi.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Fixes: 439e8c42cc ("nir/lcssa: Fix rematerializing derefs")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/11770
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32225>
iabs(a) is not positive if "a" is the minimum signed value, so this is
incorrect in that case for some values of "b".
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Fixes: 2b76de9b5d ("nir/algebraic: Add a couple optimizations for iabs and ishr")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32157>
This was needed because of the issue with using NV12 regardless
of RT format that was fixed in previous commit.
There was a special case for AV1, because AV1 Profile 0 supports
both 8 and 10 bit, but this is also not needed anymore.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32089>
If applications doesn't send any attributes to describe the format,
we would always use driver preferred format (NV12). This is wrong
for any RT format other than the driver preferred (YUV420).
Driver doesn't have a choice here, we must use the matching format.
Cc: mesa-stable
Reviewed-by: Leo Liu <leo.liu@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32089>
The code wants the number of components used by the variable in the
current attribute slot, not the total number of components.
For e.g. a 4x3 matrix, glsl_get_components() returns 12, leading to the
following error reported by AddressSanitizer:
```
Test case 'dEQP-VK.tessellation.shader_input_output.cross_invocation_per_patch_mat4x3'..
../src/compiler/nir/nir_lower_io_to_vector.c:265:16: runtime error: index 4 out of bounds for type 'nir_variable *[4]'
```
Fixes: 5ef2b8f1f2 ("nir: Add a pass for lowering IO back to vector when possible")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32193>
If shader stages are specified but compilation stages aren't,
dump NIR, backend IR and disassembly.
If compilation stages are specified but shader stages aren't,
dump all shader stages.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32079>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32079>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32079>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32079>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32079>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32079>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32079>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32079>
The new debug flags can make the output less overwhelming
and only dump what we want to see.
The old RADV_DEBUG=shaders will still print all stages.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32079>
