This test verifies the sanity of ftime and exposes bugs such as BZ
2014-09-17 Arjun Shankar <arjun.is@lostca.se>
* time/tst-ftime.c: New test.
* time/Makefile (tests): Add tst-ftime.
This patch fixes formatting of comments in soft-fp (in particular, the
normal style in glibc does not have a leading '*' on each line, and
comments should start with capital letters and end with ". */").
Tested for powerpc-nofpu that the disassembly of installed shared
libraries is unchanged by this patch.
* soft-fp/extended.h: Fix comment formatting.
* soft-fp/op-1.h: Likewise.
* soft-fp/op-2.h: Likewise.
* soft-fp/op-4.h: Likewise.
* soft-fp/op-8.h: Likewise.
* soft-fp/op-common.h: Likewise.
* soft-fp/soft-fp.h: Likewise.
This patch corrects some soft-fp formatting that failed to follow the
GNU Coding Standards.
Tested for powerpc-nofpu that the disassembly of installed shared
libraries is unchanged by this patch.
* soft-fp/op-common.h (_FP_TO_INT): Correct formatting.
This patch removes the --enable-oldest-abi configure option, which has
long been bitrotten (as reported in bug 6652). The principle of
removing this option was agreed in the thread starting at
<https://sourceware.org/ml/libc-alpha/2013-07/msg00174.html>.
Tested for x86_64 and x86 that the installed shared libraries other
than libc.so are unchanged by this patch and that libc.so disassembly
and symbol versions are unchanged (debug info changes because of
changed line numbers in csu/version.c).
[BZ #6652]
* Makeconfig (soversions-default-setname): Remove variable.
($(common-objpfx)soversions.i): Don't pass default_setname to
soversions.awk.
* Makerules ($(common-objpfx)abi-versions.h): Don't pass
oldest_abi to abi-versions.awk.
* config.h.in (GLIBC_OLDEST_ABI): Remove macro undefine.
* config.make.in (oldest-abi): Remove variable.
* configure.ac (--enable-oldest-abi): Remove configure option.
* configure: Regenerated.
* csu/version.c (banner) [GLIBC_OLDEST_ABI]: Remove conditional
text.
* scripts/abi-versions.awk: Do not handle oldest_abi variable.
* scripts/soversions.awk: Do not handle default_setname variable.
* sysdeps/mach/hurd/configure.ac: Do not handle oldest_abi
variable.
* sysdeps/mach/hurd/configure: Regenerated.
* sysdeps/unix/sysv/linux/configure.ac: Do not handle oldest_abi
variable.
* sysdeps/unix/sysv/linux/configure: Regenerated.
Replace it with including an auto-generated linker-runtime.h.
Build-tested on x86_64 and found that there was no change in the
generated code.
* elf/Makefile (CFLAGS-interp.c): Remove.
($(elf-objpfx)runtime-linker.h): Generate header with linker
path string.
* elf/interp.c: Include generated runtime-linker.h
Barring libc.so and libdl.so, none of the libraries have any entry
points, so it is pointless to add a .interp section for them. The
libdl.so entry point (in dlfcn/eval.c) is also defunct, so remove that
file as well.
Build tested for x86_64, ppc64 and s390x. I have not moved
CFLAGS-interp.c to CPPFLAGS-interp.c isnce I'll be removing it
completely in a follow-up patch.
Siddhesh
* Makerules (lib%.so): Don't include $(+interp) in
prerequisites.
* elf/Makefile (CFLAGS-interp.c): Don't define NOT_IN_libc.
* dlfcn/eval.c: Remove file.
The fix for BZ #17266 (884ddc5081)
removed changes that had gone into cdefs.h to make
__extern_always_inline usable with clang++. This patch adds back
support for clang to detect if GNU inlining semantics are available,
this time without breaking the gcc use case. The check put here is
based on the earlier patch and assertion[1] that checking if
__GNUC_STDC_INLINE__ or __GNUC_GNU_INLINE__ is defined is sufficient
to determine that clang++ suports GNU inlining semantics.
Tested with a simple program that builds with __extern_always_inline
with the patch and fails compilation without it.
#include <stdio.h>
#include <sys/cdefs.h>
extern void foo_alias (void) __asm ("foo");
__extern_always_inline void
foo (void)
{
puts ("hi oh world!");
return foo_alias ();
}
void
foo_alias (void)
{
puts ("hell oh world");
}
int
main ()
{
foo ();
}
[1] https://sourceware.org/ml/libc-alpha/2012-12/msg00306.html
[BZ #17266]
* misc/sys/cdefs.h: Define __extern_always_inline for clang
4.2 and newer.
The check for only __GNUC_STDC_INLINE__ and __GNUC_GNU_INLINE__ may
not be sufficient since those flags were added during initial support
for C99 inlining semantics. There is also a problem with always
defining __extern_inline and __extern_always_inline, since it enables
inline wrapper functions even when GNU inlining semantics are not
guaranteed. This, along with the possibility of such wrappers using
redirection (btowc for example) could result in compiler generating an
infinitely recusrive call to the function.
In fact it was such a recursion that led to this code being written
the way it was; see:
https://bugzilla.redhat.com/show_bug.cgi?id=186410
The initial change was to fix bugs 14530 and 13741, but they can be
resolved by checking if __fortify_function and/or
__extern_always_inline are defined, as it has been done in this patch.
In addition, I have audited uses of __extern_always_inline to make
sure that none of the uses result in compilation errors.
There is however a regression in this patch for llvm, since it reverts
the llvm expectation that __GNUC_STDC_INLINE__ or __GNUC_GNU_INLINE__
definition imply proper extern inline semantics.
2014-09-16 Siddhesh Poyarekar <siddhesh@redhat.com>
Jakub Jelinek <jakub@redhat.com>
[BZ #17266]
* libio/stdio.h: Check definition of __fortify_function
instead of __extern_always_inline to include bits/stdio2.h.
* math/bits/math-finite.h [__USE_XOPEN || __USE_ISOC99]: Also
check if __extern_always_inline is defined.
[__USE_MISC || __USE_XOPEN]: Likewise.
[__USE_ISOC99] Likewise.
* misc/sys/cdefs.h (__fortify_function): Define only if
__extern_always_inline is defined.
[!__cplusplus || __GNUC_PREREQ (4,3)]: Revert to defining
__extern_always_inline and __extern_inline only for g++-4.3
and newer or a compatible gcc.
There is no _POSIX_REGEX_VERSION, so don't check for it.
_REGEX_VERSION has been removed as well[1], so only keep the -1 return
for backward compatibility. I found this when trying to make the
getconf environment variables typo-proof.
* sysdeps/posix/sysconf.c (__sysconf): Return -1 for
_SC_REGEX_VERSION.
[1] http://pubs.opengroup.org/onlinepubs/009695399/functions/sysconf.html
getconf only recognizes IPV6 and RAW_SOCKETS, when the standard
requires it to recognize the actual configuration variable name[1]. I
have not removed the earlier names for compatibility.
* posix/getconf.c (vars): Add _POSIX_IPV6 and
_POSIX_RAW_SOCKETS.
[1] http://pubs.opengroup.org/onlinepubs/007904875/functions/sysconf.html
This patch removes the first column (patterns matching configuration
names) from shlib-versions, leaving shlib-versions entry selection
based purely on sysdeps directories.
An implication of this removal is that the default for any non-Linux
ports using NPTL will be the same SONAMEs for NPTL libraries as for
Linux (as those defaults, previously limited to .*-.*-linux.*, are
left in nptl/shlib-versions and nptl_db/shlib-versions).
Special host_os handling in configure.ac that was purely for
shlib-versions is removed. (The host_os setting is still used for
libc-abis - see
<https://sourceware.org/ml/libc-alpha/2014-01/msg00375.html> regarding
that - but no entries there are affected by this change.)
Tested on x86_64 and x86 that the installed shared libraries are
unchanged by this patch.
* scripts/soversions.awk: Do not handle configuration names.
* Makeconfig ($(common-objpfx)soversions.i): Do not pass cpu,
vendor and os variables to soversions.awk.
* configure.ac: Do not modify gnu-* host_os.
* configure: Regenerated
* shlib-versions: Remove first column with configuration names.
* nptl/shlib-versions: Likewise.
* nptl_db/shlib-versions: Likewise.
* sysdeps/hppa/shlib-versions: Likewise.
* sysdeps/m68k/shlib-versions: Likewise.
* sysdeps/mach/hurd/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/aarch64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/alpha/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/arm/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/hppa/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/ia64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/microblaze/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/mips/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sh/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/tile/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/shlib-versions: Likewise.
libidn/ChangeLog:
* shlib-versions: Remove first column with configuration names.
This patch makes
sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions use %ifdef
conditionals around the different symbol version definitions for big
and little endian. (It doesn't actually change the host patterns used
for those definitions; the point is to make it possible to remove the
first column from shlib-versions by eliminating the last case where it
would be harmful for it to be treated as .*-.*-.*.) The conditional
is based on the ELFv1/ELFv2 distinction rather than BE/LE, since
that's what's already tested in configure and used for the ld.so
soname in the Makefiles. (Of course if BE ELFv2 were supported in
future, it would get new symbol versions and so need new
conditionals.)
* sysdeps/unix/sysv/linux/powerpc/powerpc64/configure.ac
(HAVE_ELFV2_ABI): AC_DEFINE in ELFv2 case.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/configure:
Regenerated.
* config.h.in (HAVE_ELFV2_ABI): New macro undefine.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions:
Condition symbol version definitions on [HAVE_ELFV2_ABI].
This patch moves OS-specific entries in the top-level shlib-versions
file to appropriate sysdeps directories. I left the entries in
nptl/shlib-versions and nptl_db/shlib-versions unchanged; I think it
can be for those doing non-Linux NPTL-using ports to figure out
whether those entries should actually be OS-independent or should move
to sysdeps.
Given these two patches, I think the only further change needed before
the first column of shlib-versions can be eliminated will be changing
sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions to use %ifdef
to distinguish BE and LE configurations, instead of relying on the
powerpc64-.*-linux.* and powerpc.*le-.*-linux.* patterns.
Tested on x86_64 that the installed shared libraries are unchanged by
this patch.
* shlib-versions: Remove OS-specific entries. Moved to files in
sysdeps.
* sysdeps/mach/hurd/shlib-versions: New file.
* sysdeps/unix/sysv/linux/shlib-versions: Likewise.
This patch eliminates another way in which ex-ports and non-ex-ports
architectures differ, by moving architecture-specific entries from the
top-level shlib-versions file and that in nptl/ to appropriate sysdeps
directories. As with my previous patch
<https://sourceware.org/ml/libc-alpha/2014-06/msg00949.html>, I do not
change the regular expressions used; even where the present
expressions seem more general, I believe they are in fact specific to
the chosen sysdeps directory, because any port that matches the
expression but not the sysdeps directory does not currently exist, and
so would use different symbol versions if added in future (and an
intended goal of these changes is to eliminate the first column in
shlib-versions completely rather than having two different mechanisms
in use for system-specific configuration).
Tested on x86_64 that this does not change the installed shared
libraries. (x86_64 of course does not provide much test coverage for
this patch - what should be architecture-specific contents in
shlib-versions for x86_64 is currently abi-*-ld-soname Makefile
settings, until gnu/lib-names.h is generated more like gnu/stubs.h so
those can move back to shlib-versions.)
* nptl/shlib-versions: Remove architecture-specific entries.
Moved to files in sysdeps.
* shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/shlib-versions: New
file.
* sysdeps/unix/sysv/linux/s390/s390-64/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sh/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/shlib-versions: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/shlib-versions: Likewise.
This patch adds the new constants UDP_NO_CHECK6_TX and
UDP_NO_CHECK6_RX from Linux 3.16 to sysdeps/gnu/netinet/udp.h. (I
believe the existing constants there are already Linux-specific,
possibly with the intention that other OSes should adopt the same
values if possible if adopting the features in question.)
Tested on x86_64.
* sysdeps/gnu/netinet/udp.h (UDP_NO_CHECK6_TX): New macro.
(UDP_NO_CHECK6_RX): Likewise.
Spell _POSIX_DEVICE_SPECIFIC and _POSIX_DEVICE_SPECIFIC_R correctly.
Found when trying to make the getconf environment variables
typo-proof.
* sysdeps/posix/sysconf.c (__sysconf): Spell
_POSIX_DEVICE_SPECIFIC and _POSIX_DEVICE_SPECIFIC_R correctly.
Prior to the 2.20 release, the function was just changed to fail
unconditionally, in commit a1a6a401ab.
This commit removes the function completely, including gconv bits
which depend on it.
This changes the gconv ABI, which is not a public interface.
2d63a517e4 added support to save and
restore zmm register in the dynamic linker, but did not enhance
test-xmmymm.sh to detect accidental usage of these registers. The
patch below adds that check.
The script has also been renamed to tst-ld-sse-use.sh. To see the
minimal changes, run `git show -M`.
[BZ #16194]
* sysdeps/x86/tst-xmmymm.sh: Rename file to...
* sysdeps/x86/tst-ld-sse-use.sh: ... this. Check for zmm
register usage.
* sysdeps/x86/Makefile: Adjust.
The netgroups lookup code fails when one of the groups in the search
tree is empty. In such a case it only returns the leaves of the tree
after the blank netgroup. This is because the line parser returns a
NOTFOUND status when the netgroup exists but is empty. The
__getnetgrent_internal implementation needs to be fixed to try
remaining groups if the current group is entry. This patch implements
this fix. Tested on x86_64.
[BZ #17363]
* inet/getnetgrent_r.c (__internal_getnetgrent_r): Try next
group if the current group is empty.
This patch adds an optimized memset implementation for POWER8. For
sizes from 0 to 255 bytes, a word/doubleword algorithm similar to
POWER7 optimized one is used.
For size higher than 255 two strategies are used:
1. If the constant is different than 0, the memory is written with
altivec vector instruction;
2. If constant is 0, dbcz instructions are used. The loop is unrolled
to clear 512 byte at time.
Using vector instructions increases throughput considerable, with a
double performance for sizes larger than 1024. The dcbz loops unrolls
also shows performance improvement, by doubling throughput for sizes
larger than 8192 bytes.
This patch cleanups the multiarch bzero for powerpc64 by remove
the multiarch objects and use instead the the memset embedded
implementation presented in each multiarch optimization. The
code generate is essentially the same, but the TB_TOCLESS (which
is not essential).
GCC 4.4, the minimum compiler version, supports this option. Unlike
other warnings, -Wimplicit-function-declaration warnings should be
independent of compiler versions, so this change should not cause
compiler-specific build failures.
Merge roland/nptl-hppa to master, update and test for hppa-linux-gnu.
This commit squashes and commits the work done by Roland McGrath on
roland/nptl-hppa to migrate hppa to the new non-addon NPTL. Some
additional tweaks were required for tcb-offsets.sym to work correctly
along with clone.S (unique to hppa).
Some types of relocations technically need to be signed rather than
unsigned: in particular ones that are used with moveli or movei,
or for jump and branch. This is almost never a problem. Jump and
branch opcodes are pretty much uniformly resolved by the static linker
(unless you omit -fpic for a shared library, which is not recommended).
The moveli and movei opcodes that need to be sign-extended generally
are for positive displacements, like the construction of the address of
main() from _start(). However, tst-pie1 ends up with main below _start
(in a different module) and the test failed due to signedness issues in
relocation handling.
This commit treats the value as signed when shifting (to preserve the
high bit) and also sign-extends the value generated from the updated
bundle when comparing with the desired bundle, which we do to make sure
no overflow occurred. As a result, the tst-pie1 test now passes.
generic HAVE_RM_CTX implementation which is used for ppc/e500 as well
has introduced calls to fegetenv which should be resolved internally
with in libm
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* sysdeps/powerpc/powerpc32/e500/nofpu/fegetenv.c (fegetenv): Add
libm_hidden_ver.
If e.g. a signal is being received while we are running fork(), the signal
thread may be having our SS lock when we make the space copy, and thus in the
child we can not take the SS lock any more.
* sysdeps/mach/hurd/fork.c (__fork): Lock SS->lock around __proc_dostop call.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
TLS_INIT_TP in sysdeps/i386/nptl/tls.h uses some hand written asm to
generate a set_thread_area that might result in exchanging ebx and esp
around the syscall causing introspection tools like valgrind to loose
track of the user stack. Just use INTERNAL_SYSCALL which makes sure
esp isn't changed arbitrarily.
Before the patch the code would generate:
mov $0xf3,%eax
movl $0xfffff,0x8(%esp)
movl $0x51,0xc(%esp)
xchg %esp,%ebx
int $0x80
xchg %esp,%ebx
Using INTERNAL_SYSCALL instead will generate:
movl $0xfffff,0x8(%esp)
movl $0x51,0xc(%esp)
xchg %ecx,%ebx
mov $0xf3,%eax
int $0x80
xchg %ecx,%ebx
Thanks to Florian Weimer for analysing why the original code generated
the bogus esp usage:
_segdescr.desc happens to be at the top of the stack, so its address
is in %esp. The asm statement says that %3 is an input, so its value
will not change, and GCC can use %esp as the input register for the
expression &_segdescr.desc. But the constraints do not fully describe
the asm statement because the %3 register is actually modified, albeit
only temporarily.
[BZ #17319]
* sysdeps/i386/nptl/tls.h (TLS_INIT_TP): Use INTERNAL_SYSCALL
to call set_thread_area instead of hand written asm.
(__NR_set_thread_area): Removed define.
(TLS_FLAG_WRITABLE): Likewise.
(__ASSUME_SET_THREAD_AREA): Remove check.
(TLS_EBX_ARG): Remove define.
(TLS_LOAD_EBX): Likewise.
