This patch makes Python 3.4 or later a required tool for building
glibc, so allowing changes of awk, perl etc. code used in the build
and test to Python code without any such changes needing makefile
conditionals or to handle older Python versions.
This patch makes the configure test for Python check the version and
give an error if Python is missing or too old, and removes makefile
conditionals that are no longer needed. It does not itself convert
any code from another language to Python, and does not remove any
compatibility with older Python versions from existing scripts.
Tested for x86_64.
* configure.ac (PYTHON_PROG): Use AC_CHECK_PROG_VER. Set
critic_missing for versions before 3.4.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Document
requirement for Python to build glibc.
* INSTALL: Regenerated.
* Rules [PYTHON]: Make code unconditional.
* benchtests/Makefile [PYTHON]: Likewise.
* conform/Makefile [PYTHON]: Likewise.
* manual/Makefile [PYTHON]: Likewise.
* math/Makefile [PYTHON]: Likewise.
RDTSCP waits until all previous instructions have executed and all
previous loads are globally visible before reading the counter. RDTSC
doesn't wait until all previous instructions have been executed before
reading the counter. All x86 processors since 2010 support RDTSCP
instruction. This patch adds RDTSCP support to benchtests.
* benchtests/Makefile (CPPFLAGS-nonlib): Add -DUSE_RDTSCP if
USE_RDTSCP is defined.
* sysdeps/x86/hp-timing.h (HP_TIMING_NOW): Use RDTSCP if
USE_RDTSCP is defined.
Otherwise, we see the following runtime error when using the parameter:
File "./glibc/benchtests/scripts/compare_bench.py", line 46, in do_compare
if d > threshold:
TypeError: '>' not supported between instances of 'float' and 'str'
* benchtests/scripts/compare_bench.py (main): set float type on
threshold argument.
Add the workload test properties (max-throughput, latency, etc.) to
the schema to prevent benchmark output validation from failing.
* benchtests/scripts/benchout.schema.json (properties): Add
new properties.
Add the duration and iterations attributes to the workloads tests to
make the json schema parser happy
* benchtests/bench-skeleton.c (main): Add duration and
iterations attributes.
Drop realloc_bufs in favour of making alloc_bufs transparently
reallocate the buffers if it had allocated before. Also consolidate
computation of buffer lengths so that they don't get repeated on every
reallocation.
* benchtests/bench-string.h (buf1_size, buf2_size): New
variables.
(init_sizes): New function.
(test_init): Use it.
(alloc_buf, exit_error): New functions.
(alloc_bufs): Use ALLOC_BUF.
(realloc_bufs): Remove.
* benchtests/bench-memcmp.c (do_test): Adjust.
* benchtests/bench-memset-large.c (do_test): Likewise.
* benchtests/bench-memset-walk.c (do_test): Likewise.
* benchtests/bench-memset.c (do_test): Likewise.
* benchtests/bench-strncmp.c (do_test): Likewise.
Python 2 does not have a FileNotFoundError so drop it in favour of
simply printing out the last (and most informative) line of the
exception.
* benchtests/scripts/compare_strings.py: Import traceback.
(parse_file): Pretty-print error.
The argparse library is used on compare_bench script to improve command line
argument parsing. The 'schema validation file' is now optional, reducing by
one the number of required parameters.
* benchtests/scripts/compare_bench.py (__main__): use the argparse
library to improve command line parsing.
(__main__): make schema file as optional parameter (--schema),
defaulting to benchtests/scripts/benchout.schema.json.
(main): move out of the parsing stuff to __main_ and leave it
only as caller of main comparison functions.
Improve strstr performance. Strstr tends to be slow because it uses
many calls to memchr and a slow byte loop to scan for the next match.
Performance is significantly improved by using strnlen on larger blocks
and using strchr to search for the next matching character. strcasestr
can also use strnlen to scan ahead, and memmem can use memchr to check
for the next match.
On the GLIBC bench tests the performance gains on Cortex-A72 are:
strstr: +25%
strcasestr: +4.3%
memmem: +18%
On a 256KB dataset strstr performance improves by 67%, strcasestr by 47%.
Reviewd-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On x86-64, there may be multiple IFUNC implementations for a given
function. But we may be only interested in a subset of them. This
patch adds -f/--functions argument to compare a subset of IFUNC
implementations.
* benchtests/scripts/compare_strings.py (process_results): Add
funcs argument. Compare only functions which are selected.
(main): Check if base function is among selected functions.
Pass selected functions to process_results.
(__main__): Add -f/--functions argument.
Catch runtime exceptions in case the user provided: wrong base
function, attribute(s) or input file. In any of the latter, quit
immediately with non-zero return code.
* benchtests/scripts/compare_string.py: (process_results) Catch
exception in non-existent base_func and catch exception in
non-existent attribute.
(parse_file) Catch exception in non-existent input file.
Having a string comparison report with neither diff numbers nor header
yields a more useful output to be consumed by other tools.
* benchtests/scripts/compare_string.py: Add --no-diff and --no-header
options to avoid diff calculation and omit header, respectively.
(main): process --no-diff and --no-header
This is a minor style change to move the definition of I to its usage
scope instead of at the top of the function. This is consistent with
glibc style guidelines and more importantly it was getting in the way
of my testing.
* benchtests/bench-memcpy-walk.c (do_test): Move declaration
of I into loop header.
* benchtests/bench-memmove-walk.c (do_test): Likewise.
Add an undefine of attribute_hidden since it may be defined in some cases
(it must be defined since it is used by some hp-timing configurations).
* benchtests/bench-timing.h (attribute_hidden): Undefine.
Currently the benchtests are run with internal GLIBC headers, which is incorrect.
Defining _ISOMAC in the makefile ensures the internal headers are bypassed.
Fix all tests which were relying on internal defines or includes.
* benchtests/Makefile: Define _ISOMAC.
* benchtests/bench-strcoll.c: Add missing sys/stat.h include.
* benchtests/bench-string.h: Define inhibit_loop_to_libcall macro.
* benchtests/bench-strstr.c: Define empty libc_hidden_builtin_def.
* benchtests/bench-strtok.c (oldstrtok): Use rawmemchr.
* benchtests/bench-timing.h: Define attribute_hidden.
The 0 length strncmp is interesting for correctness but not for
performance.
* benchtests/bench-strncmp.c (test_main): Remove 0 length tests.
(do_test_limit): Likewise.
Don't reuse buffers for different strncmp implementations since the
earlier implementation will end up warming the cache for the later
one. Eventually there should be a more elegant way to do this.
* benchtests/bench-strncmp.c (do_test_limit): Reallocate buffers
for every implementation.
(do_test): Likewise.
Remove the slow paths from pow. Like several other double precision math
functions, pow is exactly rounded. This is not required from math functions
and causes major overheads as it requires multiple fallbacks using higher
precision arithmetic if a result is close to 0.5ULP. Ridiculous slowdowns
of up to 100000x have been reported when the highest precision path triggers.
All GLIBC math tests pass on AArch64 and x64 (with ULP of pow set to 1).
The worst case error is ~0.506ULP. A simple test over a few hundred million
values shows pow is 10% faster on average. This fixes BZ #13932.
[BZ #13932]
* sysdeps/ieee754/dbl-64/uexp.h (err_1): Remove.
* benchtests/pow-inputs: Update comment for slow path cases.
* manual/probes.texi (slowpow_p10): Delete removed probe.
(slowpow_p10): Likewise.
* math/Makefile: Remove halfulp.c and slowpow.c.
* sysdeps/aarch64/libm-test-ulps: Set ULP of pow to 1.
* sysdeps/generic/math_private.h (__exp1): Remove error argument.
(__halfulp): Remove.
(__slowpow): Remove.
* sysdeps/i386/fpu/halfulp.c: Delete file.
* sysdeps/i386/fpu/slowpow.c: Likewise.
* sysdeps/ia64/fpu/halfulp.c: Likewise.
* sysdeps/ia64/fpu/slowpow.c: Likewise.
* sysdeps/ieee754/dbl-64/e_exp.c (__exp1): Remove error argument,
improve comments and add error analysis.
* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Add error analysis.
(power1): Remove function:
(log1): Remove error argument, add error analysis.
(my_log2): Remove function.
* sysdeps/ieee754/dbl-64/halfulp.c: Delete file.
* sysdeps/ieee754/dbl-64/slowpow.c: Likewise.
* sysdeps/m68k/m680x0/fpu/halfulp.c: Likewise.
* sysdeps/m68k/m680x0/fpu/slowpow.c: Likewise.
* sysdeps/powerpc/power4/fpu/Makefile: Remove CPPFLAGS-slowpow.c.
* sysdeps/x86_64/fpu/libm-test-ulps: Set ULP of pow to 1.
* sysdeps/x86_64/fpu/multiarch/Makefile: Remove slowpow-fma.c,
slowpow-fma4.c, halfulp-fma.c, halfulp-fma4.c.
* sysdeps/x86_64/fpu/multiarch/e_pow-fma.c (__slowpow): Remove define.
* sysdeps/x86_64/fpu/multiarch/e_pow-fma4.c (__slowpow): Likewise.
* sysdeps/x86_64/fpu/multiarch/halfulp-fma.c: Delete file.
* sysdeps/x86_64/fpu/multiarch/halfulp-fma4.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowpow-fma.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowpow-fma4.c: Likewise.
Keeping the buffers the same across test runs gives later invocations
the advantage since they access cached data. Reallocate so that all
test runs are on equal grounds.
* benchtests/bench-memcmp.c (do_test): Call realloc_buf for
every test run.
This patch adds BENCHSET variable to benchtests/Makefile in order to
provide the capability to run a list of subsets of benchmark tests, ie;
make bench BENCHSET="bench-pthread bench-math malloc-thread"
This helps users to benchmark specific glibc area
ChangeLog:
* benchtests/Makefile:Add BENCHSET to allow subsets of
benchmarks to be run.
* benchtests/README: Add documentation for: Running subsets of
benchmarks.
Signed-off-by: Victor Rodriguez <victor.rodriguez.bahena@intel.com>
Signed-off-by: Icarus Sparry <icarus.w.sparry@intel.com>
Reviewed-By: Siddhesh Poyarekar <siddhesh@sourceware.org>
When executing bench-math the benchmark output is invalid with this
error msg:
Invalid benchmark output: 'workload-spec2006.wrf' does not match any of
the regexes: '^[_a-zA-Z0-9]*$¹ or Invalid benchmark output: Additional
properties are not allowed ('workload-spec2006.wrf' was unexpected)
The error was seen when running the test:
workload-spec2006.wrf, 'stack=1024,guard=1' and 'stack=1024,guard=2'.
The problem is that the current regex's do not accept the hyphen, dot, equal
and comma in the output.
This patch changes the regex in benchout.schema.json to accept symbols in
benchmark tests names.
ChangeLog:
* benchtests/scripts/benchout.schema.json: Fix regex to accept a
wider range of tests names.
Signed-off-by: Victor Rodriguez <victor.rodriguez.bahena@intel.com>
Reviewed-By: Siddhesh Poyarekar <siddhesh@sourceware.org>
Benchmark workload-spec2006.wrf does not produce max, min or mean
results but instead produce throughput. This is represented in
benchtests/bench-skeleton.c. This patch adjust benchout.schema.json to consider
bench.out from bench-math benchmarks as valid
ChangeLog:
* benchtests/scripts/benchout.schema.json: Add throughput as accepted
result from property and remove "max", min" and "mean" from required
properties based on benchtests/bench-skeleton.c.
Signed-off-by: Victor Rodriguez <victor.rodriguez.bahena@intel.com>
Reviewed-By: Siddhesh Poyarekar <siddhesh@sourceware.org>
Numbers for very small sizes (< 128B) are much noisier for non-cached
benchmarks like the walk benchmarks, so don't include them.
* benchtests/bench-memcpy-walk.c (START_SIZE): Set to 128.
* benchtests/bench-memmove-walk.c (START_SIZE): Likewise.
* benchtests/bench-memset-walk.c (START_SIZE): Likewise.
Make the walking benchmarks walk only backwards since copying both
ways is biased in favour of implementations that use non-temporal
stores for larger sizes; falkor is one of them. This also fixes up
bugs in computation of the result which ended up multiplying the
length with the timing result unnecessarily.
* benchtests/bench-memcpy-walk.c (do_one_test): Copy only
backwards. Fix timing computation.
* benchtests/bench-memmove-walk.c (do_one_test): Likewise.
* benchtests/bench-memset-walk.c (do_one_test): Walk backwards
on memset by N at a time. Fix timing computation.
This benchmark is an attempt to eliminate cache effects from string
benchmarks. The benchmark walks both ways through a large memory area
and copies different sizes of memory and alignments one at a time
instead of looping around in the same memory area. This is a good
metric to have alongside the simple memmove benchmark (which is only
really useful for smaller sizes) especially for larger sizes where the
likelihood of the call being done only once is pretty high.
This benchmark is different from memcpy in that it also tests
overlapping copies.
* benchtests/bench-memmove-walk.c: New file.
* benchtests/Makefile (string-benchset): Add it.
This benchmark is an attempt to eliminate cache effects from string
benchmarks. The benchmark walks backward through a large memory area
and sets different sizes of memory and alignments one at a time
instead of looping around in the same memory area. This is a good
metric to have alongside the simple memset benchmark (which is only
really useful for smaller sizes) especially for larger sizes where the
likelihood of the call being done only once is pretty high.
* benchtests/bench-memset-walk.c: New file.
* benchtests/Makefile (string-benchset): Add it.
This benchmark is an attempt to eliminate cache effects from string
benchmarks. The benchmark walks both ways through a large memory area
and copies different sizes of memory and alignments one at a time
instead of looping around in the same memory area. This is a good
metric to have alongside the other memcpy benchmarks, especially for
larger sizes where the likelihood of the call being done only once is
pretty high.
* benchtests/bench-memcpy-walk.c: New file.
* benchtests/Makefile (string-benchset): Add it.
exp2f and log2f benchmark traces are just copies of the existing
expf and logf traces from wrf_r.
* benchtests/Makefile: Add exp2f and log2f benchmarks.
* benchtests/exp2f-inputs: Copy of expf-inputs.
* benchtests/log2f-inputs: Copy of logf-inputs.
Add a trace for logf. This is a reduced trace based on 2.8 billion
samples extracted from wrf_r.
* benchtests/Makefile: Add logf benchmark.
* benchtests/logf-inputs: Add reduced trace from wrf_r.
Add a trace for expf. This is a reduced trace based on 2.4 billion
samples extracted from wrf_r.
* benchtests/Makefile: Add expf benchmark.
* benchtests/expf-inputs: Add reduced trace from wrf_r.
This patch adds benchtests for the trunc and truncf functions. The
inputs listed are fairly arbitrary; I do not assert they are
representative of any particular application.
* benchtests/Makefile (bench-math): Add trunc and truncf.
(CFLAGS-bench-trunc.c): New variable.
(CFLAGS-bench-truncf.c): Likewise.
* benchtests/trunc-inputs: New file.
* benchtests/truncf-inputs: Likewise.
The compare_strings.py option unconditionally generates a graph PNG
image of the input data, which can be unnecessary and slow. Put this
behind an optional flag -g.
* benchtests/scripts/compare_strings.py: New option -g.
(draw_graph): Print a message that a graph is being generated.
(process_results): Generate graph only if -g is passed.
(main): Process option -g.
Make the column widths for the outputs fixed so that they look a
little less messy. They will still look bad with lots of IFUNCs (like
on x86) but it's still a step forward.
* benchtests/scripts/compare_strings.py (process_results):
Better spacing for output.
Make the script more usable by adding proper command line options
along with a way to query the options. The script is capable of doing
a bunch of things right now like choosing a base for comparison,
choosing to generate graphs, etc. and they should be accessible via
command line switches.
* benchtests/scripts/compare_strings.py: Use argparse.
* benchtests/README: Document existence of compare_strings.py.
Keeping the same buffers along with copying the same size of data into
the same location means that the first routine is typically the
slowest since it has to bear the cost of fetching data into to cache.
Reallocating buffers stabilizes numbers by a bit.
* benchtests/bench-string.h (realloc_bufs): New function.
(test_init): Call it.
* benchtests/bench-memset-large.c (do_test): Likewise.
* benchtests/bench-memset.c (do_test): Likewise.
Make the memset benchmarks (bench-memset and bench-memset-large) print
their output in JSON so that they can be evaluated using the
compare_strings.py script.
* benchtests/bench-memset-large.c: Print output in JSON
format.
* benchtests/bench-memset.c: Likewise.
This code page is identical to code page 850 except that X'D5'
has been changed from LI61 (dotless i) to SC20 (euro symbol).
The code points from /x01 to /x1f in the /localedata/charmaps/IBM858
file have the same mapping as those in localedata/charmaps/ANSI_X3.4-1968.
That means they disagree with with
ftp://ftp.software.ibm.com/software/globalization/gcoc/attachments/CP00858.txt
in that range.
For example, localedata/charmaps/IBM858 and localedata/charmaps/ANSI_X3.4-1968 have:
“<U0001> /x01 START OF HEADING (SOH)”
whereas CP00858.txt has:
“01 SS000000 Smiling Face”
That means that CP00858.txt is not really ASCII-compatible and to make
it ASCII-compatible we deviate fro CP00858.txt in the code points from /x01
to /x1f.
[BZ #21084]
* benchtests/strcoll-inputs/filelist#en_US.UTF-8: Add IBM858 and ibm858.c.
* iconvdata/Makefile: Add IBM858.
* iconvdata/gconv-modules: Add IBM858.
* iconvdata/ibm858.c: New file.
* iconvdata/tst-tables.sh: Add IBM858
* localedata/charmaps/IBM858: New file.
This patch further improves math function benchmarking by adding a latency
test in addition to throughput. This enables more accurate comparisons of the
math functions. The latency test works by creating a dependency on the previous
iteration: func_res = F (func_res * zero + input[i]). The multiply by zero
avoids changing the input.
It reports reciprocal throughput and latency in nanoseconds (depending on the
timing header used) and max/min throughput in iterations per second:
"workload-spec2006.wrf": {
"reciprocal-throughput": 100,
"latency": 200,
"max-throughput": 1.0e+07,
"min-throughput": 5.0e+06
}
* benchtests/bench-skeleton.c (main): Add support for
latency benchmarking.
* benchtests/scripts/bench.py: Add support for latency benchmarking.
Make the memmove benchmarks (bench-memmove and bench-memmove-large)
print their output in JSON so that they can be evaluated using the
compare_strings.py script.
* benchtests/bench-memmove-large.c: Print output in JSON
format.
* benchtests/bench-memmove.c: Likewise.
The test run is unnecessary and interferes with the benchmark. The
tests are done during make check, so they're unnecessary here.
* benchtests/bench-memccpy.c (do_one_test): Remove checks.
* benchtests/bench-memchr.c (do_one_test): Likewise.
* benchtests/bench-memcpy-large.c (do_one_test): Likewise.
* benchtests/bench-memcpy.c (do_one_test): Likewise.
* benchtests/bench-memmove-large.c (do_one_test): Likewise.
* benchtests/bench-memmove.c (do_one_test): Likewise.
* benchtests/bench-memset-large.c (do_one_test): Likewise.
* benchtests/bench-memset.c (do_one_test): Likewise.
* benchtests/bench-string.h (test_init): Remove memsets.
The compare_strings.py script generates a graph for the benchmarks it
performs a comparison on and that fails if X is not available. Avoid
the error and ensure that only the graph is generated and saved as a
PNG file.
* benchtests/scripts/compare_strings.py: Avoid display error
when generating graph.
