The variable idx contains the index into the extra array, whereas wextra
points into the extra array at this index, containing the length of the
following collating sequence in the wide character representation.
It replaces the internal usage of __{f,l}xstat{at}{64} with the
__{f,l}stat{at}{64}. It should not change the generate code since
sys/stat.h explicit defines redirections to internal calls back to
xstat* symbols.
Checked with a build for all affected ABIs. I also check on
x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Sync this file from Gnulib, thus incorporating the following
fix for a bug with regexps with 16 or more subexpressions:
* posix/regex_internal.h (struct re_backref_cache_entry):
Use bitset_word_t as the type of eps_reachable_subexps_map,
instead of unsigned short int. This fixes a bug I introduced
to glibc in 2005-09-28T17:33:18Z!drepper@redhat.com (glibc commit
2c05d33f90, BZ #1302).
Remove unused member 'unused'.
* posix/regex.c (__STDC_WANT_IEC_60559_BFP_EXT__):
Define, for ULONG_WIDTH. This syncs regex.c from Gnujlib.
* posix/regex_internal.h (ULONG_WIDTH):
Use a more-portable fallback, from Gnulib.
(BITSET_WORD_BITS): Now defined in terms of ULONG_WIDTH.
Suppress or avoid warnings in tests that exercise failure modes by making
calls with invalid arguments.
Reviewed-by: DJ Delorie <dj@redhat.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
Adds the access attribute newly introduced in GCC 10 to the subset of
function declarations that are already covered by _FORTIFY_SOURCE and
that don't have corresponding GCC built-in equivalents.
Reviewed-by: DJ Delorie <dj@redhat.com>
The main changes are:
- Adapt to libsupport.
- Synchronize the signal handler using atomics.
- Replace waitpid by waitid calls.
- Use support_process_state_wait to wait for child state.
- Add tests for P_PGID and P_ALL.
- Use sigwaitinfo instead of global state set by the signal handler.
Checked on x86_64-linux-gnu and i686-linux-gnu.
The __suseconds64_t type is supposed to be the 64 bit type across all
architectures.
It would be mostly used internally in the glibc - however, when passed to
Linux kernel (very unlikely), if necessary, it shall be converted to 32
bit type (i.e. __suseconds_t)
Build tests:
./src/scripts/build-many-glibcs.py glibcs
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
I've updated copyright dates in glibc for 2020. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files. As well as the usual annual
updates, mainly dates in --version output (minus libc.texinfo which
previously had to be handled manually but is now successfully updated
by update-copyrights), there is a fix to
sysdeps/unix/sysv/linux/powerpc/bits/termios-c_lflag.h where a typo in
the copyright notice meant it failed to be updated automatically.
Please remember to include 2020 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
The POSIX implementation is used as default and both BSD and Linux
version are removed. It simplifies the implementation for
architectures that do not provide either __NR_waitpid or
__NR_wait4.
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu.
If the regex has more subexpressions than the number of elements allocated
in the regmatch_t array passed to regexec then proceed_next_node may
access the regmatch_t array outside its bounds.
No testcase added because even without this bug it would then crash in
pop_fail_stack which is bug 11053.
The generic version is straightforward. For Hurd, its nanosleep
implementation is moved to clock_nanosleep with adjustments from
generic unix implementation.
The generic clock_nanosleep unix version is also removed since
it calls nanosleep.
Checked on x86_64-linux-gnu and powerpc64le-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This patch replaces the fork+exec by posix_spawn on wordexp, which
allows a better scability on Linux and simplifies the thread
cancellation handling.
The only change which can not be implemented with posix_spawn the
/dev/null check to certify it is indeed the expected device. I am
not sure how effetive this check is since /dev/null tampering means
something very wrong with the system and this is the least of the
issues. My view is the tests is really out of the place and the
hardening provided is minimum.
If the idea is still to provide such check, I think a possibilty
would be to open /dev/null, check it, add a dup2 file action, and
close the file descriptor.
Checked on powerpc64le-linux-gnu and x86_64-linux-gnu.
* include/spawn.h (__posix_spawn_file_actions_addopen): New
prototype.
* posix/spawn_faction_addopen.c (posix_spawn_file_actions_addopen):
Add internal alias.
* posix/wordexp.c (create_environment, free_environment): New
functions.
(exec_comm_child, exec_comm): Use posix_spawn instead of fork+exec.
* posix/wordexp-test.c: Use libsupport.
Once wordexp switches to posix_spawn, testing for command execution
based on fork handlers will not work anymore. Therefore, move these
subtests into a new test, posix/tst-wordexp-nocmd, which uses a
different form of command execution detection, based on PID
namespaces.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Problem reported by Stefan Liebler in:
https://sourceware.org/ml/libc-alpha/2019-08/msg00658.html
* posix/tst-regex.c: Convert this file from Latin-1 to UTF-8.
(do_test, test_expr): Adjust to the fact that this source file,
and the test data in ChangeLog.8, is now UTF-8 instead of Latin-1.
* posix/tst-regex.input: Copy from ChangeLog.old/ChangeLog.8,
so that it is now UTF-8.
The recent commit e6855a3bdf
changed the encoding of ChangeLog.old/ChangeLog.8 from ISO-8859 to UTF-8.
Unfortunately the test posix/tst-regex assumes the former encoding.
Furthermore Francesco Potortì is now written with 'ì' instead of 'i`'
which would lead to two further matches in the first call to test_expr.
This patch just copies the former ChangeLog.8 file to tst-regex.input
and adjusts the test in order to use this new input file.
ChangeLog:
* posix/tst-regex.c (do_test): Use tst-regex.input as input file.
* posix/tst-regex.input: New file.
This was found by Coverity (CID 1484201). [BZ#24844]
* posix/regex_internal.c (create_cd_newstate): Fix use of bad
pointer and/or memory leak when storage is exhausted.
The fix for BZ#21270 (commit 158d5fa0e1) added a mask to avoid offset larger
than 1^44 to be used along __NR_mmap2. However mips64n32 users __NR_mmap,
as mips64n64, but still defines off_t as old non-LFS type (other ILP32, such
x32, defines off_t being equal to off64_t). This leads to use the same
mask meant only for __NR_mmap2 call for __NR_mmap, thus limiting the maximum
offset it can use with mmap64.
This patch fixes by setting the high mask only for __NR_mmap2 usage. The
posix/tst-mmap-offset.c already tests it and also fails for mips64n32. The
patch also change the test to check for an arch-specific header that defines
the maximum supported offset.
Checked on x86_64-linux-gnu, i686-linux-gnu, and I also tests tst-mmap-offset
on qemu simulated mips64 with kernel 3.2.0 kernel for both mips-linux-gnu and
mips64-n32-linux-gnu.
[BZ #24699]
* posix/tst-mmap-offset.c: Mention BZ #24699.
(do_test_bz21270): Rename to do_test_large_offset and use
mmap64_maximum_offset to check for maximum expected offset value.
* sysdeps/generic/mmap_info.h: New file.
* sysdeps/unix/sysv/linux/mips/mmap_info.h: Likewise.
* sysdeps/unix/sysv/linux/mmap64.c (MMAP_OFF_HIGH_MASK): Define iff
__NR_mmap2 is used.
Keep these functions compatible with Gnulib while adding
__time64_t support. The basic idea is to move private API
declarations from include/time.h to time/mktime-internal.h, since
the former file cannot easily be shared with Gnulib whereas the
latter can.
Also, do some other minor cleanup while in the neighborhood.
* include/time.h: Include stdbool.h, time/mktime-internal.h.
(__mktime_internal): Move this prototype to time/mktime-internal.h,
since Gnulib needs it.
(__localtime64_r, __gmtime64_r) [__TIMESIZE == 64]:
Move these macros to time/mktime-internal.h, since Gnulib needs them.
(__mktime64, __timegm64) [__TIMESIZE != 64]: New prototypes.
(in_time_t_range): New static function.
* posix/bits/types.h (__time64_t) [__TIMESIZE == 64 && !defined __LIBC]:
Do not define as a macro in this case, so that portable code is
less tempted to use __time64_t.
* time/mktime-internal.h: Rewrite so that it does both glibc
and Gnulib work. Include time.h if not _LIBC.
(mktime_offset_t) [!_LIBC]: Define for gnulib.
(__time64_t, __gmtime64_r, __localtime64_r, __mktime64, __timegm64)
[!_LIBC || __TIMESIZE == 64]: New macros, mostly moved here
from include/time.h.
(__gmtime_r, __localtime_r, __mktime_internal) [!_LIBC]:
New macros, taken from GNulib.
(__mktime_internal): New prototype, moved here from include/time.h.
* time/mktime.c (mktime_min, mktime_max, convert_time)
(ranged_convert, __mktime_internal, __mktime64):
* time/timegm.c (__timegm64):
Use __time64_t, not time_t.
* time/mktime.c: Stop worrying about whether time_t is floating-point.
(__mktime64) [! (_LIBC && __TIMESIZE != 64)]:
Rename from mktime.
(mktime) [_LIBC && __TIMESIZE != 64]: New function.
* time/timegm.c [!_LIBC]: Include libc-config.h, not config.h,
for libc_hidden_def.
Include errno.h.
(__timegm64) [! (_LIBC && __TIMESIZE != 64)]:
Rename from timegm.
(timegm) [_LIBC && __TIMESIZE != 64]: New function.
First cut at publicizing __time64_t
The stub implementations are turned into compat symbols.
Linux actually has two reserved system call numbers (for getpmsg
and putpmsg), but these system calls have never been implemented,
and there are no plans to implement them, so this patch replaces
the wrappers with the generic stubs.
According to <https://bugzilla.redhat.com/show_bug.cgi?id=436349>,
the presence of the XSI STREAMS declarations is a minor portability
hazard because they are not actually implemented.
This commit does not change the TIRPC support code in
sunrpc/rpc_svcout.c. It uses additional XTI functionality and
therefore never worked with glibc.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The test for obsolete typedefs in installed headers was implemented
using grep, and could therefore get false positives on e.g. “ulong”
in a comment. It was also scanning all of the headers included by
our headers, and therefore testing headers we don’t control, e.g.
Linux kernel headers.
This patch splits the obsolete-typedef test from
scripts/check-installed-headers.sh to a separate program,
scripts/check-obsolete-constructs.py. Being implemented in Python,
it is feasible to make it tokenize C accurately enough to avoid false
positives on the contents of comments and strings. It also only
examines $(headers) in each subdirectory--all the headers we install,
but not any external dependencies of those headers. Headers whose
installed name starts with finclude/ are ignored, on the assumption
that they contain Fortran.
It is also feasible to make the new test understand the difference
between _defining_ the obsolete typedefs and _using_ the obsolete
typedefs, which means posix/{bits,sys}/types.h no longer need to be
exempted. This uncovered an actual bug in bits/types.h: __quad_t and
__u_quad_t were being used to define __S64_TYPE, __U64_TYPE,
__SQUAD_TYPE and __UQUAD_TYPE. These are changed to __int64_t and
__uint64_t respectively. This is a safe change, despite the comments
in bits/types.h claiming a difference between __quad_t and __int64_t,
because those comments are incorrect. In all current ABIs, both
__quad_t and __int64_t are ‘long’ when ‘long’ is a 64-bit type, and
‘long long’ when ‘long’ is a 32-bit type, and similarly for __u_quad_t
and __uint64_t. (Changing the types to be what the comments say they
are would be an ABI break, as it affects C++ name mangling.) This
patch includes a minimal change to make the comments not completely
wrong.
sys/types.h was defining the legacy BSD u_intN_t typedefs using a
construct that was not necessarily consistent with how the C99 uintN_t
typedefs are defined, and is also too complicated for the new script to
understand (it lexes C relatively accurately, but it does not attempt
to expand preprocessor macros, nor does it do any actual parsing).
This patch cuts all of that out and uses bits/types.h's __uintN_t typedefs
to define u_intN_t instead. This is verified to not change the ABI on
any supported architecture, via the c++-types test, which means u_intN_t
and uintN_t were, in fact, consistent on all supported architectures.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* scripts/check-obsolete-constructs.py: New test script.
* scripts/check-installed-headers.sh: Remove tests for
obsolete typedefs, superseded by check-obsolete-constructs.py.
* Rules: Run scripts/check-obsolete-constructs.py over $(headers)
as a special test. Update commentary.
* posix/bits/types.h (__SQUAD_TYPE, __S64_TYPE): Define as __int64_t.
(__UQUAD_TYPE, __U64_TYPE): Define as __uint64_t.
Update commentary.
* posix/sys/types.h (__u_intN_t): Remove.
(u_int8_t): Typedef using __uint8_t.
(u_int16_t): Typedef using __uint16_t.
(u_int32_t): Typedef using __uint32_t.
(u_int64_t): Typedef using __uint64_t.
This patch adds fall-through comments in some cases where -Wextra
produces implicit-fallthrough warnings.
The patch is non-exhaustive. Apart from architecture-specific code
for non-x86_64 architectures, it does not change sunrpc/xdr.c (legacy
code, probably should have such changes, but left to be dealt with
separately), or places that already had comments about the
fall-through but not matching the form expected by
-Wimplicit-fallthrough=3 (the default level with -Wextra; my
inclination is to adjust those comments to match rather than
downgrading to -Wimplicit-fallthrough=1 to allow any comment), or one
place where I thought the implicit fallthrough was not correct and so
should be handled separately as a bug fix. I think the key thing to
consider in review of this patch is whether the fall-through is indeed
intended and correct in each place where such a comment is added.
Tested for x86_64.
* elf/dl-exception.c (_dl_exception_create_format): Add
fall-through comments.
* elf/ldconfig.c (parse_conf_include): Likewise.
* elf/rtld.c (print_statistics): Likewise.
* locale/programs/charmap.c (parse_charmap): Likewise.
* misc/mntent_r.c (__getmntent_r): Likewise.
* posix/wordexp.c (parse_arith): Likewise.
(parse_backtick): Likewise.
* resolv/ns_ttl.c (ns_parse_ttl): Likewise.
* sysdeps/x86/cpu-features.c (init_cpu_features): Likewise.
* sysdeps/x86_64/dl-machine.h (elf_machine_rela): Likewise.
Non-sysdeps headers cannot be overriden by sysdeps headers across the
entire build, so it is necessary to turn such extension headers into
sysdeps headers themselves. The approach here follows the existing
<bits/shm.h> header (although it uses sysdeps/gnu instead of
sysdeps/generic).
Fixes commit 1d0fc21382 ("Linux: Add
gettid system call wrapper [BZ #6399]") and commit
8f89ab216f ("posix: Fix missing wrapper
header for <bits/unistd_ext.h>").
This commit adds gettid to <unistd.h> on Linux, and not to the
kernel-independent GNU API.
gettid is now supportable on Linux because too many things assume a
1:1 mapping between libpthread threads and kernel threads.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This fixes the same bug in fnmatch that was fixed by commit 7e2f0d2d77 for
regexp matching. As a side effect it also removes the use of an unbound
VLA.
From time to time I get fails in tst-spawn like:
tst-spawn.c:111: numeric comparison failure
left: 0 (0x0); from: xlseek (fd2, 0, SEEK_CUR)
right: 28 (0x1c); from: strlen (fd2string)
error: 1 test failures
tst-spawn.c:252: numeric comparison failure
left: 1 (0x1); from: WEXITSTATUS (status)
right: 0 (0x0); from: 0
error: 1 test failures
It turned out, that a child process is testing it's open file descriptors
with e.g. a sequence of testing the current position, setting the position
to zero and reading a specific amount of bytes.
Unfortunately starting with commit 2a69f853c0
the test is spawning a second child process which is sharing some of the
file descriptors. If the test sequence as mentioned above is running in parallel
it leads to test failures.
As the second call of posix_spawn shall test a NULL pid argument,
this patch is just moving the waitpid of the first child
before the posix_spawn of the second child.
ChangeLog:
* posix/tst-spawn do_test(): Move waitpid before posix_spawn.
Problem found by AddressSanitizer, reported by Hongxu Chen in:
https://debbugs.gnu.org/34140
* posix/regexec.c (proceed_next_node):
Do not read past end of input buffer.
Austin Group issue #411 [1] proposes that posix_spawn file action
posix_spawn_file_actions_adddup2 resets the close-on-exec when
source and destination refer to same file descriptor.
It solves the issue on multi-thread applications which uses
close-on-exec as default, and want to hand-chose specifically
file descriptor to purposefully inherited into a child process.
Current approach to achieve this scenario is to use two adddup2 file
actions and a temporary file description which do not conflict with
any other, coupled with a close file action to avoid leaking the
temporary file descriptor. This approach, besides being complex,
may fail with EMFILE/ENFILE file descriptor exaustion.
This can be more easily accomplished with an in-place removal of
FD_CLOEXEC. Although the resulting adddup2 semantic is slight
different than dup2 (equal file descriptors should be handled as
no-op), the proposed possible solution are either more complex
(fcntl action which a limited set of operations) or results in
unrequired operations (dup3 which also returns EINVAL for same
file descriptor).
Checked on aarch64-linux-gnu.
[BZ #23640]
* posix/tst-spawn.c (do_prepare, handle_restart, do_test): Add
posix_spawn_file_actions_adddup2 test to check O_CLOCEXEC reset.
* sysdeps/unix/sysv/linux/spawni.c (__spawni_child): Add
close-on-exec reset for adddup2 file action.
* sysdeps/posix/spawni.c (__spawni_child): Likewise.
[1] http://austingroupbugs.net/view.php?id=411
From the glibc point of view, this removes duplicate macro
definitions and is obviously safe.
From the Gnulib point of view, this pacifies xlc 12.01 on AIX 7.1.
* posix/regex_internal.h:
(__attribute__, __attribute_warn_unused_result__):
Remove; already defined elsewhere.
This simplifies the code, by removing stuff intended for porting
to Gnulib but no longer needed there.
* posix/regcomp.c [!_LIBC]: No need to put #ifdef _LIBC around
uses of libc_hidden_def, weak_alias.
* posix/regcomp.c, posix/regexec.c: Use __restrict rather than
_Restrict_ except for public-facing headers.
* posix/regex_internal.h (attribute_hidden) [!_LIBC]:
Remove; already defined elsewhere.
* posix/regex.c, posix/regex_internal.h:
Use __GNUC_PREREQ instead of rolling our own.
* posix/regex_internal.h (__GNUC_PREREQ): Remove duplicate defn.
