Both symbols have to be moved at the same time because they
are intertwined for __WORDSIZE == 64. The treatment of this case
is also changed to match more closely how the other files suppress
the declaration of the *64 identifier.
The symbols were moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The symbols were moved using scripts/move-symbol-to-libc.py.
A version placeholder symbol is needed on alpha and sparc because
of the additional symbols formerly at version GLIBC_2.3.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>:
This commit also moves the aio_misc and aio_sigquue helper,
so GLIBC_PRIVATE exports need to be added.
The symbol was moved using scripts/move-symbol-to-libc.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Revert "elf: Fix DTV gap reuse logic [BZ #27135]"
This reverts commit 572bd547d5.
It turns out that the _dl_next_tls_modid in _dl_map_object_from_fd keeps
returning the same modid over and over again if there is a gap and
more than TLS-using module is loaded in one dlopen call. This corrupts
TLS data structures. The bug is still present after a revert, but
empirically it is much more difficult to trigger (because it involves a
dlopen failure).
If lib->flags (in the cache) did not match GLRO (dl_correct_cache_id),
searching for further glibc-hwcaps entries did not happen, and it
was possible that the best glibc-hwcaps was not found. By accident,
this causes a test failure for elf/tst-glibc-hwcaps-prepend-cache
on armv7l.
This commit changes the cache lookup logic to continue searching
if (a) no match has been found, (b) a named glibc-hwcaps match
has been found(), or (c) non-glibc-hwcaps match has been found
and the entry flags and cache default flags do not match.
_DL_CACHE_DEFAULT_ID is used instead of GLRO (dl_correct_cache_id)
because the latter is only written once on i386 if loading
of libc.so.5 libraries is selected, so GLRO (dl_correct_cache_id)
should probably removed in a future change.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
No bug. The way wcsnlen will check if near the end of maxlen
is the following macro:
mov %r11, %rsi; \
subq %rax, %rsi; \
andq $-64, %rax; \
testq $-64, %rsi; \
je L(strnlen_ret)
Which words independently of s + maxlen overflowing. So the
second overflow check is unnecissary for correctness and
just extra overhead in the common no overflow case.
test-strlen.c, test-wcslen.c, test-strnlen.c and test-wcsnlen.c are
all passing
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
No bug. Just seem like relevant cases given that strnlen will
use s + maxlen in many implementations.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The pthread_atfork is similar between Linux and Hurd, only the compat
version bits differs. The generic version is place at sysdeps/pthread
with a common name.
It also fixes an issue with Hurd license, where the static-only object
did not use LGPL + exception.
Checked on x86_64-linux-gnu, i686-linux-gnu, and with a build for
i686-gnu.
The Linux nptl implementation is used as base for generic fork
implementation to handle the internal locks and mutexes. The
system specific bits are moved a new internal _Fork symbol.
(This new implementation will be used to provide a async-signal-safe
_Fork now that POSIX has clarified that fork might not be
async-signal-safe [1]).
For Hurd it means that the __nss_database_fork_prepare_parent and
__nss_database_fork_subprocess will be run in a slight different
order.
[1] https://austingroupbugs.net/view.php?id=62
It is a wrapper for Linux clone syscall, to simplify the call to the
use only the most common arguments and remove architecture specific
handling (such as ia64 different name and signature).
AMD define different flags for IRPB, IBRS, and STIPBP [1], so new
x86_64_cpu are added and IBRS_IBPB is only tested for Intel.
The SSDB is also defined and implemented different on AMD [2],
and also a new AMD_SSDB flag is added. It should map to the
cpuinfo 'ssdb' on recent AMD cpus.
It fixes tst-cpu-features-cpuinfo and tst-cpu-features-cpuinfo-static
on recent AMD cpus.
Checked on x86_64-linux-gnu on AMD Ryzen 9 5900X.
[1] https://developer.amd.com/wp-content/resources/Architecture_Guidelines_Update_Indirect_Branch_Control.pdf
[2] https://bugzilla.kernel.org/show_bug.cgi?id=199889
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
IBT and SHSTK usable bits are copied from CPUID feature bits and later
cleared if kernel doesn't support CET. Copy IBT and SHSTK usable only
if CET is enabled so that they aren't set on CET capable processors
with non-CET enabled glibc.
This commit fixes the bug mentioned in the previous commit.
The previous implementations of wmemchr in these files relied
on maxlen * sizeof(wchar_t) which was not guranteed by the standard.
The new overflow tests added in the previous commit now
pass (As well as all the other tests).
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This commit fixes the bug mentioned in the previous commit.
The previous implementations of wmemchr in these files relied
on n * sizeof(wchar_t) which was not guranteed by the standard.
The new overflow tests added in the previous commit now
pass (As well as all the other tests).
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
This commit adds tests for a bug in the wide char variant of the
functions where the implementation may assume that maxlen for wcsnlen
or n for wmemchr/strncat will not overflow when multiplied by
sizeof(wchar_t).
These tests show the following implementations failing on x86_64:
wcsnlen-sse4_1
wcsnlen-avx2
wmemchr-sse2
wmemchr-avx2
strncat would fail as well if it where on a system that prefered
either of the wcsnlen implementations that failed as it relies on
wcsnlen.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
No bug. This comment adds the ifunc / build infrastructure
necessary for wcslen to prefer the sse4.1 implementation
in strlen-vec.S. test-wcslen.c is passing.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Since strlen.S contains SSE2 version of strlen/strnlen and SSE4.1
version of wcslen/wcsnlen, move strlen.S to multiarch/strlen-vec.S
and include multiarch/strlen-vec.S from SSE2 and SSE4.1 variants.
This also removes the unused symbols, __GI___strlen_sse2 and
__GI___wcsnlen_sse4_1.
The usage of signals to implementation pthread cancellation is an
implementation detail and should not be visible through cancellation
entrypoints.
However now that pthread_cancel always send the SIGCANCEL, some
entrypoint might be interruptable and return EINTR to the caller
(for instance on sem_wait).
Using SA_RESTART hides this, since the cancellation handler should
either act uppon cancellation (if asynchronous cancellation is enable)
or ignore the cancellation internal signal.
Checked on x86_64-linux-gnu and i686-linux-gnu.
* NEWS: Don't imply the default will always be 32-bit.
* manual/creature.texi (Feature Test Macros):
Say that _TIME_BITS and _FILE_OFFSET_BITS defaults
may change in future releases.
On filesystems that do not support dt_type, a regular file shows up as
DT_UNKNOWN. Fall back to using lstat64 to read file properties in
such cases.
Reviewed-by: DJ Delorie <dj@redhat.com>
Drop local copy of gconv file parsing and use the one in
gconv_parseconfdir.h instead. Now there is a single implementation of
configuration file parsing.
Reviewed-by: DJ Delorie <dj@redhat.com>
Split configuration file processing into a separate header file and
include it. Macroize all calls that need to go through internal
interfaces so that iconvconfig can also use them.
Reviewed-by: DJ Delorie <dj@redhat.com>
The modules and nmodules parameters passed to add_modules, add_alias,
etc. are not used and are hence unnecessary. Remove them so that
their signatures match the functions in iconvconfig.
Reviewed-by: DJ Delorie <dj@redhat.com>
Reviewed-by: Andreas Schwab <schwab@linux-m68k.org>
The alloca sizes ought to be constrained to PATH_MAX, but replace them
with dynamic allocation to be safe. A static PATH_MAX array would
have worked too but Hurd does not have PATH_MAX and the code path is
not hot enough to micro-optimise this allocation. Revisit if any of
those realities change.
Reviewed-by: DJ Delorie <dj@redhat.com>
The (private) symbols __pthread_clock_gettime, __pthread_clock_settime and
__pthread_initialize_minimal haven't been defined by libpthread for some
time.
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
The large timeout are already tests by io/tst-utimensat-skeleton.c.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
It breaks the usage case of live migration like CRIU or similar
and most usages can be optimized away by either building glibc with
a minimum 5.1 kernel or by using the 32-bit syscall for the common
case.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
It breaks the usage case of live migration like CRIU or similar.
The performance drawback is it would require an extra syscall
on older kernels without 64-bit time support.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
It breaks the usage case of live migration like CRIU or similar.
The performance drawback is it would require an extra syscall
on older kernels without 64-bit time support.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one. This also avoids the need
to use supports_time64() (which breaks the usage case of live migration
like CRIU or similar).
It also fixes an issue on 32-bit select call for !__ASSUME_PSELECT
(microblase with older kernels only) where the expected timeout
is a 'struct timeval' instead of 'struct timespec'.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one. This also avoids the need
to use supports_time64() (which breaks the usage case of live migration
like CRIU or similar).
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one. This also avoids the need
to use supports_time64() (which breaks the usage case of live migration
like CRIU or similar).
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
It is a simple wrapper over timer_create, timer_settime, and
sigaction. It will be used to check for large timeout to trigger an
EINTR and to avoid use a large timeout (as for alarm()).
Reviewed-by: Lukasz Majewski <lukma@denx.de>
