git/t/t9809-git-p4-client-view.sh
Johannes Schindelin 99e37c2560 git p4 test: use 'test_atexit' to kill p4d and the watchdog process
Use 'test_atexit' to run cleanup commands to stop 'p4d' at the end of
the test script or upon interrupt or failure, as it is shorter,
simpler, and more robust than registering such cleanup commands in the
trap on EXIT in the test scripts.

Note that one of the test scripts, 't9801-git-p4-branch.sh', stops and
then re-starts 'p4d' twice in the middle of the script; take care that
the cleanup functions to stop 'p4d' are only registered once.

Note also that 'git p4' tests invoke different functions in the trap
on EXIT ('cleanup') and in the last test before 'test_done'
('kill_p4d').  Register both of these functions with 'test_atexit' for
now, and a a later patch in this series will then clean up the
redundancy.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-14 12:34:39 +09:00

840 lines
21 KiB
Bash
Executable File

#!/bin/sh
test_description='git p4 client view'
. ./lib-git-p4.sh
test_expect_success 'start p4d' '
start_p4d
'
#
# Verify these files exist, exactly. Caller creates
# a list of files in file "files".
#
check_files_exist() {
ok=0 &&
num=$# &&
for arg ; do
test_path_is_file "$arg" &&
ok=$(($ok + 1))
done &&
test $ok -eq $num &&
test_line_count = $num files
}
#
# Sync up the p4 client, make sure the given files (and only
# those) exist.
#
client_verify() {
(
cd "$cli" &&
p4 sync &&
find . -type f ! -name files >files &&
check_files_exist "$@"
)
}
#
# Make sure the named files, exactly, exist.
#
git_verify() {
(
cd "$git" &&
git ls-files >files &&
check_files_exist "$@"
)
}
# //depot
# - dir1
# - file11
# - file12
# - dir2
# - file21
# - file22
init_depot() {
for d in 1 2 ; do
mkdir -p dir$d &&
for f in 1 2 ; do
echo dir$d/file$d$f >dir$d/file$d$f &&
p4 add dir$d/file$d$f &&
p4 submit -d "dir$d/file$d$f"
done
done &&
find . -type f ! -name files >files &&
check_files_exist dir1/file11 dir1/file12 \
dir2/file21 dir2/file22
}
test_expect_success 'init depot' '
(
cd "$cli" &&
init_depot
)
'
# double % for printf
test_expect_success 'view wildcard %%n' '
client_view "//depot/%%%%1/sub/... //client/sub/%%%%1/..." &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot
'
test_expect_success 'view wildcard *' '
client_view "//depot/*/bar/... //client/*/bar/..." &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot
'
test_expect_success 'wildcard ... in the middle' '
client_view "//depot/.../file11 //client/.../file11" &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot
'
test_expect_success 'wildcard ... in the middle and at the end' '
client_view "//depot/.../a/... //client/.../a/..." &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot
'
test_expect_success 'basic map' '
client_view "//depot/dir1/... //client/cli1/..." &&
files="cli1/file11 cli1/file12" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
test_expect_success 'client view with no mappings' '
client_view &&
client_verify &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify
'
test_expect_success 'single file map' '
client_view "//depot/dir1/file11 //client/file11" &&
files="file11" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
test_expect_success 'later mapping takes precedence (entire repo)' '
client_view "//depot/dir1/... //client/cli1/..." \
"//depot/... //client/cli2/..." &&
files="cli2/dir1/file11 cli2/dir1/file12
cli2/dir2/file21 cli2/dir2/file22" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
test_expect_success 'later mapping takes precedence (partial repo)' '
client_view "//depot/dir1/... //client/..." \
"//depot/dir2/... //client/..." &&
files="file21 file22" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
# Reading the view backwards,
# dir2 goes to cli12
# dir1 cannot go to cli12 since it was filled by dir2
# dir1 also does not go to cli3, since the second rule
# noticed that it matched, but was already filled
test_expect_success 'depot path matching rejected client path' '
client_view "//depot/dir1/... //client/cli3/..." \
"//depot/dir1/... //client/cli12/..." \
"//depot/dir2/... //client/cli12/..." &&
files="cli12/file21 cli12/file22" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
# since both have the same //client/..., the exclusion
# rule keeps everything out
test_expect_success 'exclusion wildcard, client rhs same (odd)' '
client_view "//depot/... //client/..." \
"-//depot/dir2/... //client/..." &&
client_verify &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify
'
test_expect_success 'exclusion wildcard, client rhs different (normal)' '
client_view "//depot/... //client/..." \
"-//depot/dir2/... //client/dir2/..." &&
files="dir1/file11 dir1/file12" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
test_expect_success 'exclusion single file' '
client_view "//depot/... //client/..." \
"-//depot/dir2/file22 //client/file22" &&
files="dir1/file11 dir1/file12 dir2/file21" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
test_expect_success 'overlay wildcard' '
client_view "//depot/dir1/... //client/cli/..." \
"+//depot/dir2/... //client/cli/..." &&
files="cli/file11 cli/file12 cli/file21 cli/file22" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
test_expect_success 'overlay single file' '
client_view "//depot/dir1/... //client/cli/..." \
"+//depot/dir2/file21 //client/cli/file21" &&
files="cli/file11 cli/file12 cli/file21" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
test_expect_success 'exclusion with later inclusion' '
client_view "//depot/... //client/..." \
"-//depot/dir2/... //client/dir2/..." \
"//depot/dir2/... //client/dir2incl/..." &&
files="dir1/file11 dir1/file12 dir2incl/file21 dir2incl/file22" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
test_expect_success 'quotes on rhs only' '
client_view "//depot/dir1/... \"//client/cdir 1/...\"" &&
client_verify "cdir 1/file11" "cdir 1/file12" &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify "cdir 1/file11" "cdir 1/file12"
'
#
# Submit tests
#
# clone sets variable
test_expect_success 'clone --use-client-spec sets useClientSpec' '
client_view "//depot/... //client/..." &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
(
cd "$git" &&
git config --bool git-p4.useClientSpec >actual &&
echo true >true &&
test_cmp actual true
)
'
# clone just a subdir of the client spec
test_expect_success 'subdir clone' '
client_view "//depot/... //client/..." &&
files="dir1/file11 dir1/file12 dir2/file21 dir2/file22" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot/dir1 &&
git_verify dir1/file11 dir1/file12
'
#
# submit back, see what happens: five cases
#
test_expect_success 'subdir clone, submit modify' '
client_view "//depot/... //client/..." &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot/dir1 &&
(
cd "$git" &&
git config git-p4.skipSubmitEdit true &&
echo line >>dir1/file12 &&
git add dir1/file12 &&
git commit -m dir1/file12 &&
git p4 submit
) &&
(
cd "$cli" &&
test_path_is_file dir1/file12 &&
test_line_count = 2 dir1/file12
)
'
test_expect_success 'subdir clone, submit add' '
client_view "//depot/... //client/..." &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot/dir1 &&
(
cd "$git" &&
git config git-p4.skipSubmitEdit true &&
echo file13 >dir1/file13 &&
git add dir1/file13 &&
git commit -m dir1/file13 &&
git p4 submit
) &&
(
cd "$cli" &&
test_path_is_file dir1/file13
)
'
test_expect_success 'subdir clone, submit delete' '
client_view "//depot/... //client/..." &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot/dir1 &&
(
cd "$git" &&
git config git-p4.skipSubmitEdit true &&
git rm dir1/file12 &&
git commit -m "delete dir1/file12" &&
git p4 submit
) &&
(
cd "$cli" &&
test_path_is_missing dir1/file12
)
'
test_expect_success 'subdir clone, submit copy' '
client_view "//depot/... //client/..." &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot/dir1 &&
(
cd "$git" &&
git config git-p4.skipSubmitEdit true &&
git config git-p4.detectCopies true &&
cp dir1/file11 dir1/file11a &&
git add dir1/file11a &&
git commit -m "copy to dir1/file11a" &&
git p4 submit
) &&
(
cd "$cli" &&
test_path_is_file dir1/file11a &&
! is_cli_file_writeable dir1/file11a
)
'
test_expect_success 'subdir clone, submit rename' '
client_view "//depot/... //client/..." &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot/dir1 &&
(
cd "$git" &&
git config git-p4.skipSubmitEdit true &&
git config git-p4.detectRenames true &&
git mv dir1/file13 dir1/file13a &&
git commit -m "rename dir1/file13 to dir1/file13a" &&
git p4 submit
) &&
(
cd "$cli" &&
test_path_is_missing dir1/file13 &&
test_path_is_file dir1/file13a &&
! is_cli_file_writeable dir1/file13a
)
'
# see t9800 for the non-client-spec case, and the rest of the wildcard tests
test_expect_success 'wildcard files submit back to p4, client-spec case' '
client_view "//depot/... //client/..." &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot/dir1 &&
(
cd "$git" &&
echo git-wild-hash >dir1/git-wild#hash &&
if test_have_prereq !MINGW,!CYGWIN
then
echo git-wild-star >dir1/git-wild\*star
fi &&
echo git-wild-at >dir1/git-wild@at &&
echo git-wild-percent >dir1/git-wild%percent &&
git add dir1/git-wild* &&
git commit -m "add some wildcard filenames" &&
git config git-p4.skipSubmitEditCheck true &&
git p4 submit
) &&
(
cd "$cli" &&
test_path_is_file dir1/git-wild#hash &&
if test_have_prereq !MINGW,!CYGWIN
then
test_path_is_file dir1/git-wild\*star
fi &&
test_path_is_file dir1/git-wild@at &&
test_path_is_file dir1/git-wild%percent
) &&
(
# delete these carefully, cannot just do "p4 delete"
# on files with wildcards; but git-p4 knows how
cd "$git" &&
git rm dir1/git-wild* &&
git commit -m "clean up the wildcards" &&
git p4 submit
)
'
test_expect_success 'reinit depot' '
(
cd "$cli" &&
rm files &&
p4 delete */* &&
p4 submit -d "delete all files" &&
init_depot
)
'
#
# What happens when two files of the same name are overlayed together?
# The last-listed file should take preference.
#
# //depot
# - dir1
# - file11
# - file12
# - filecollide
# - dir2
# - file21
# - file22
# - filecollide
#
test_expect_success 'overlay collision setup' '
client_view "//depot/... //client/..." &&
(
cd "$cli" &&
p4 sync &&
echo dir1/filecollide >dir1/filecollide &&
p4 add dir1/filecollide &&
p4 submit -d dir1/filecollide &&
echo dir2/filecollide >dir2/filecollide &&
p4 add dir2/filecollide &&
p4 submit -d dir2/filecollide
)
'
test_expect_success 'overlay collision 1 to 2' '
client_view "//depot/dir1/... //client/..." \
"+//depot/dir2/... //client/..." &&
files="file11 file12 file21 file22 filecollide" &&
echo dir2/filecollide >actual &&
client_verify $files &&
test_cmp actual "$cli"/filecollide &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files &&
test_cmp actual "$git"/filecollide
'
test_expect_failure 'overlay collision 2 to 1' '
client_view "//depot/dir2/... //client/..." \
"+//depot/dir1/... //client/..." &&
files="file11 file12 file21 file22 filecollide" &&
echo dir1/filecollide >actual &&
client_verify $files &&
test_cmp actual "$cli"/filecollide &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files &&
test_cmp actual "$git"/filecollide
'
test_expect_success 'overlay collision delete 2' '
client_view "//depot/... //client/..." &&
(
cd "$cli" &&
p4 sync &&
p4 delete dir2/filecollide &&
p4 submit -d "remove dir2/filecollide"
)
'
# no filecollide, got deleted with dir2
test_expect_failure 'overlay collision 1 to 2, but 2 deleted' '
client_view "//depot/dir1/... //client/..." \
"+//depot/dir2/... //client/..." &&
files="file11 file12 file21 file22" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
test_expect_success 'overlay collision update 1' '
client_view "//depot/dir1/... //client/dir1/..." &&
(
cd "$cli" &&
p4 sync &&
p4 open dir1/filecollide &&
echo dir1/filecollide update >dir1/filecollide &&
p4 submit -d "update dir1/filecollide"
)
'
# still no filecollide, dir2 still wins with the deletion even though the
# change to dir1 is more recent
test_expect_failure 'overlay collision 1 to 2, but 2 deleted, then 1 updated' '
client_view "//depot/dir1/... //client/..." \
"+//depot/dir2/... //client/..." &&
files="file11 file12 file21 file22" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
test_expect_success 'overlay collision delete filecollides' '
client_view "//depot/... //client/..." &&
(
cd "$cli" &&
p4 sync &&
p4 delete dir1/filecollide dir2/filecollide &&
p4 submit -d "remove filecollides"
)
'
#
# Overlays as part of sync, rather than initial checkout:
# 1. add a file in dir1
# 2. sync to include it
# 3. add same file in dir2
# 4. sync, make sure content switches as dir2 has priority
# 5. add another file in dir1
# 6. sync
# 7. add/delete same file in dir2
# 8. sync, make sure it disappears, again dir2 wins
# 9. cleanup
#
# //depot
# - dir1
# - file11
# - file12
# - colA
# - colB
# - dir2
# - file21
# - file22
# - colA
# - colB
#
test_expect_success 'overlay sync: add colA in dir1' '
client_view "//depot/dir1/... //client/dir1/..." &&
(
cd "$cli" &&
p4 sync &&
echo dir1/colA >dir1/colA &&
p4 add dir1/colA &&
p4 submit -d dir1/colA
)
'
test_expect_success 'overlay sync: initial git checkout' '
client_view "//depot/dir1/... //client/..." \
"+//depot/dir2/... //client/..." &&
files="file11 file12 file21 file22 colA" &&
echo dir1/colA >actual &&
client_verify $files &&
test_cmp actual "$cli"/colA &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files &&
test_cmp actual "$git"/colA
'
test_expect_success 'overlay sync: add colA in dir2' '
client_view "//depot/dir2/... //client/dir2/..." &&
(
cd "$cli" &&
p4 sync &&
echo dir2/colA >dir2/colA &&
p4 add dir2/colA &&
p4 submit -d dir2/colA
)
'
test_expect_success 'overlay sync: colA content switch' '
client_view "//depot/dir1/... //client/..." \
"+//depot/dir2/... //client/..." &&
files="file11 file12 file21 file22 colA" &&
echo dir2/colA >actual &&
client_verify $files &&
test_cmp actual "$cli"/colA &&
(
cd "$git" &&
git p4 sync --use-client-spec &&
git merge --ff-only p4/master
) &&
git_verify $files &&
test_cmp actual "$git"/colA
'
test_expect_success 'overlay sync: add colB in dir1' '
client_view "//depot/dir1/... //client/dir1/..." &&
(
cd "$cli" &&
p4 sync &&
echo dir1/colB >dir1/colB &&
p4 add dir1/colB &&
p4 submit -d dir1/colB
)
'
test_expect_success 'overlay sync: colB appears' '
client_view "//depot/dir1/... //client/..." \
"+//depot/dir2/... //client/..." &&
files="file11 file12 file21 file22 colA colB" &&
echo dir1/colB >actual &&
client_verify $files &&
test_cmp actual "$cli"/colB &&
(
cd "$git" &&
git p4 sync --use-client-spec &&
git merge --ff-only p4/master
) &&
git_verify $files &&
test_cmp actual "$git"/colB
'
test_expect_success 'overlay sync: add/delete colB in dir2' '
client_view "//depot/dir2/... //client/dir2/..." &&
(
cd "$cli" &&
p4 sync &&
echo dir2/colB >dir2/colB &&
p4 add dir2/colB &&
p4 submit -d dir2/colB &&
p4 delete dir2/colB &&
p4 submit -d "delete dir2/colB"
)
'
test_expect_success 'overlay sync: colB disappears' '
client_view "//depot/dir1/... //client/..." \
"+//depot/dir2/... //client/..." &&
files="file11 file12 file21 file22 colA" &&
client_verify $files &&
test_when_finished cleanup_git &&
(
cd "$git" &&
git p4 sync --use-client-spec &&
git merge --ff-only p4/master
) &&
git_verify $files
'
test_expect_success 'overlay sync: cleanup' '
client_view "//depot/... //client/..." &&
(
cd "$cli" &&
p4 sync &&
p4 delete dir1/colA dir2/colA dir1/colB &&
p4 submit -d "remove overlay sync files"
)
'
#
# Overlay tests again, but swapped so dir1 has priority.
# 1. add a file in dir1
# 2. sync to include it
# 3. add same file in dir2
# 4. sync, make sure content does not switch
# 5. add another file in dir1
# 6. sync
# 7. add/delete same file in dir2
# 8. sync, make sure it is still there
# 9. cleanup
#
# //depot
# - dir1
# - file11
# - file12
# - colA
# - colB
# - dir2
# - file21
# - file22
# - colA
# - colB
#
test_expect_success 'overlay sync swap: add colA in dir1' '
client_view "//depot/dir1/... //client/dir1/..." &&
(
cd "$cli" &&
p4 sync &&
echo dir1/colA >dir1/colA &&
p4 add dir1/colA &&
p4 submit -d dir1/colA
)
'
test_expect_success 'overlay sync swap: initial git checkout' '
client_view "//depot/dir2/... //client/..." \
"+//depot/dir1/... //client/..." &&
files="file11 file12 file21 file22 colA" &&
echo dir1/colA >actual &&
client_verify $files &&
test_cmp actual "$cli"/colA &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files &&
test_cmp actual "$git"/colA
'
test_expect_success 'overlay sync swap: add colA in dir2' '
client_view "//depot/dir2/... //client/dir2/..." &&
(
cd "$cli" &&
p4 sync &&
echo dir2/colA >dir2/colA &&
p4 add dir2/colA &&
p4 submit -d dir2/colA
)
'
test_expect_failure 'overlay sync swap: colA no content switch' '
client_view "//depot/dir2/... //client/..." \
"+//depot/dir1/... //client/..." &&
files="file11 file12 file21 file22 colA" &&
echo dir1/colA >actual &&
client_verify $files &&
test_cmp actual "$cli"/colA &&
(
cd "$git" &&
git p4 sync --use-client-spec &&
git merge --ff-only p4/master
) &&
git_verify $files &&
test_cmp actual "$git"/colA
'
test_expect_success 'overlay sync swap: add colB in dir1' '
client_view "//depot/dir1/... //client/dir1/..." &&
(
cd "$cli" &&
p4 sync &&
echo dir1/colB >dir1/colB &&
p4 add dir1/colB &&
p4 submit -d dir1/colB
)
'
test_expect_success 'overlay sync swap: colB appears' '
client_view "//depot/dir2/... //client/..." \
"+//depot/dir1/... //client/..." &&
files="file11 file12 file21 file22 colA colB" &&
echo dir1/colB >actual &&
client_verify $files &&
test_cmp actual "$cli"/colB &&
(
cd "$git" &&
git p4 sync --use-client-spec &&
git merge --ff-only p4/master
) &&
git_verify $files &&
test_cmp actual "$git"/colB
'
test_expect_success 'overlay sync swap: add/delete colB in dir2' '
client_view "//depot/dir2/... //client/dir2/..." &&
(
cd "$cli" &&
p4 sync &&
echo dir2/colB >dir2/colB &&
p4 add dir2/colB &&
p4 submit -d dir2/colB &&
p4 delete dir2/colB &&
p4 submit -d "delete dir2/colB"
)
'
test_expect_failure 'overlay sync swap: colB no change' '
client_view "//depot/dir2/... //client/..." \
"+//depot/dir1/... //client/..." &&
files="file11 file12 file21 file22 colA colB" &&
echo dir1/colB >actual &&
client_verify $files &&
test_cmp actual "$cli"/colB &&
test_when_finished cleanup_git &&
(
cd "$git" &&
git p4 sync --use-client-spec &&
git merge --ff-only p4/master
) &&
git_verify $files &&
test_cmp actual "$cli"/colB
'
test_expect_success 'overlay sync swap: cleanup' '
client_view "//depot/... //client/..." &&
(
cd "$cli" &&
p4 sync &&
p4 delete dir1/colA dir2/colA dir1/colB &&
p4 submit -d "remove overlay sync files"
)
'
#
# Rename directories to test quoting in depot-side mappings
# //depot
# - "dir 1"
# - file11
# - file12
# - "dir 2"
# - file21
# - file22
#
test_expect_success 'rename files to introduce spaces' '
client_view "//depot/... //client/..." &&
client_verify dir1/file11 dir1/file12 \
dir2/file21 dir2/file22 &&
(
cd "$cli" &&
p4 open dir1/... &&
p4 move dir1/... "dir 1"/... &&
p4 open dir2/... &&
p4 move dir2/... "dir 2"/... &&
p4 submit -d "rename with spaces"
) &&
client_verify "dir 1/file11" "dir 1/file12" \
"dir 2/file21" "dir 2/file22"
'
test_expect_success 'quotes on lhs only' '
client_view "\"//depot/dir 1/...\" //client/cdir1/..." &&
files="cdir1/file11 cdir1/file12" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
client_verify $files
'
test_expect_success 'quotes on both sides' '
client_view "\"//depot/dir 1/...\" \"//client/cdir 1/...\"" &&
client_verify "cdir 1/file11" "cdir 1/file12" &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify "cdir 1/file11" "cdir 1/file12"
'
test_done