mirrors/git
0
0
Fork 0
mirror of https://github.com/git/git.git synced 2024-12-18 06:14:59 +08:00
Code Issues Packages Projects Releases Wiki Activity
a201c20b41
git/Makefile
Vicent Marti 7cc8f97108 pack-objects: implement bitmap writing 
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.

If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.

Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:

    1. `bitmap_writer_set_checksum`: this call stores the partial
       checksum for the packfile being written; the checksum will be
       written in the resulting bitmap index to verify its integrity

    2. `bitmap_writer_build_type_index`: this call uses the array of
       `struct object_entry` that has just been sorted when writing out
       the actual packfile index to disk to generate 4 type-index bitmaps
       (one for each object type).

       These bitmaps have their nth bit set if the given object is of
       the bitmap's type. E.g. the nth bit of the Commits bitmap will be
       1 if the nth object in the packfile index is a commit.

       This is a very cheap operation because the bitmap writing code has
       access to the metadata stored in the `struct object_entry` array,
       and hence the real type for each object in the packfile.

    3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
       index for one of the packfiles we're trying to repack, this call
       will efficiently rebuild the existing bitmaps so they can be
       reused on the new index. All the existing bitmaps will be stored
       in a `reuse` hash table, and the commit selection phase will
       prioritize these when selecting, as they can be written directly
       to the new index without having to perform a revision walk to
       fill the bitmap. This can greatly speed up the repack of a
       repository that already has bitmaps.

    4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
       a given `pack-objects` run, the sequence of commits generated
       during the Counting Objects phase will be stored in an array.

       We then use that array to build up the list of selected commits.
       Writing a bitmap in the index for each object in the repository
       would be cost-prohibitive, so we use a simple heuristic to pick
       the commits that will be indexed with bitmaps.

       The current heuristics are a simplified version of JGit's
       original implementation. We select a higher density of commits
       depending on their age: the 100 most recent commits are always
       selected, after that we pick 1 commit of each 100, and the gap
       increases as the commits grow older. On top of that, we make sure
       that every single branch that has not been merged (all the tips
       that would be required from a clone) gets their own bitmap, and
       when selecting commits between a gap, we tend to prioritize the
       commit with the most parents.

       Do note that there is no right/wrong way to perform commit
       selection; different selection algorithms will result in
       different commits being selected, but there's no such thing as
       "missing a commit". The bitmap walker algorithm implemented in
       `prepare_bitmap_walk` is able to adapt to missing bitmaps by
       performing manual walks that complete the bitmap: the ideal
       selection algorithm, however, would select the commits that are
       more likely to be used as roots for a walk in the future (e.g.
       the tips of each branch, and so on) to ensure a bitmap for them
       is always available.

    5. `bitmap_writer_build`: this is the computationally expensive part
       of bitmap generation. Based on the list of commits that were
       selected in the previous step, we perform several incremental
       walks to generate the bitmap for each commit.

       The walks begin from the oldest commit, and are built up
       incrementally for each branch. E.g. consider this dag where A, B,
       C, D, E, F are the selected commits, and a, b, c, e are a chunk
       of simplified history that will not receive bitmaps.

            A---a---B--b--C--c--D
                     \
                      E--e--F

       We start by building the bitmap for A, using A as the root for a
       revision walk and marking all the objects that are reachable
       until the walk is over. Once this bitmap is stored, we reuse the
       bitmap walker to perform the walk for B, assuming that once we
       reach A again, the walk will be terminated because A has already
       been SEEN on the previous walk.

       This process is repeated for C, and D, but when we try to
       generate the bitmaps for E, we can reuse neither the current walk
       nor the bitmap we have generated so far.

       What we do now is resetting both the walk and clearing the
       bitmap, and performing the walk from scratch using E as the
       origin. This new walk, however, does not need to be completed.
       Once we hit B, we can lookup the bitmap we have already stored
       for that commit and OR it with the existing bitmap we've composed
       so far, allowing us to limit the walk early.

       After all the bitmaps have been generated, another iteration
       through the list of commits is performed to find the best XOR
       offsets for compression before writing them to disk. Because of
       the incremental nature of these bitmaps, XORing one of them with
       its predecesor results in a minimal "bitmap delta" most of the
       time. We can write this delta to the on-disk bitmap index, and
       then re-compose the original bitmaps by XORing them again when
       loaded.

       This is a phase very similar to pack-object's `find_delta` (using
       bitmaps instead of objects, of course), except the heuristics
       have been greatly simplified: we only check the 10 bitmaps before
       any given one to find best compressing one. This gives good
       results in practice, because there is locality in the ordering of
       the objects (and therefore bitmaps) in the packfile.

     6. `bitmap_writer_finish`: the last step in the process is
	serializing to disk all the bitmap data that has been generated
	in the two previous steps.

	The bitmap is written to a tmp file and then moved atomically to
	its final destination, using the same process as
	`pack-write.c:write_idx_file`.

Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-30 12:19:22 -08:00

2609 lines
75 KiB
Makefile
Raw Blame History

# The default target of this Makefile is...
all::
# Define V=1 to have a more verbose compile.
#
# Define SHELL_PATH to a POSIX shell if your /bin/sh is broken.
#
# Define SANE_TOOL_PATH to a colon-separated list of paths to prepend
# to PATH if your tools in /usr/bin are broken.
#
# Define SOCKLEN_T to a suitable type (such as 'size_t') if your
# system headers do not define a socklen_t type.
#
# Define INLINE to a suitable substitute (such as '__inline' or '') if git
# fails to compile with errors about undefined inline functions or similar.
#
# Define SNPRINTF_RETURNS_BOGUS if your are on a system which snprintf()
# or vsnprintf() return -1 instead of number of characters which would
# have been written to the final string if enough space had been available.
#
# Define FREAD_READS_DIRECTORIES if your are on a system which succeeds
# when attempting to read from an fopen'ed directory.
#
# Define NO_OPENSSL environment variable if you do not have OpenSSL.
# This also implies BLK_SHA1.
#
# Define USE_LIBPCRE if you have and want to use libpcre. git-grep will be
# able to use Perl-compatible regular expressions.
#
# Define LIBPCREDIR=/foo/bar if your libpcre header and library files are in
# /foo/bar/include and /foo/bar/lib directories.
#
# Define NO_CURL if you do not have libcurl installed. git-http-fetch and
# git-http-push are not built, and you cannot use http:// and https://
# transports (neither smart nor dumb).
#
# Define CURLDIR=/foo/bar if your curl header and library files are in
# /foo/bar/include and /foo/bar/lib directories.
#
# Define NO_EXPAT if you do not have expat installed. git-http-push is
# not built, and you cannot push using http:// and https:// transports (dumb).
#
# Define EXPATDIR=/foo/bar if your expat header and library files are in
# /foo/bar/include and /foo/bar/lib directories.
#
# Define EXPAT_NEEDS_XMLPARSE_H if you have an old version of expat (e.g.,
# 1.1 or 1.2) that provides xmlparse.h instead of expat.h.
#
# Define NO_GETTEXT if you don't want Git output to be translated.
# A translated Git requires GNU libintl or another gettext implementation,
# plus libintl-perl at runtime.
#
# Define USE_GETTEXT_SCHEME and set it to 'fallthrough', if you don't trust
# the installed gettext translation of the shell scripts output.
#
# Define HAVE_LIBCHARSET_H if you haven't set NO_GETTEXT and you can't
# trust the langinfo.h's nl_langinfo(CODESET) function to return the
# current character set. GNU and Solaris have a nl_langinfo(CODESET),
# FreeBSD can use either, but MinGW and some others need to use
# libcharset.h's locale_charset() instead.
#
# Define CHARSET_LIB to you need to link with library other than -liconv to
# use locale_charset() function. On some platforms this needs to set to
# -lcharset
#
# Define LIBC_CONTAINS_LIBINTL if your gettext implementation doesn't
# need -lintl when linking.
#
# Define NO_MSGFMT_EXTENDED_OPTIONS if your implementation of msgfmt
# doesn't support GNU extensions like --check and --statistics
#
# Define HAVE_PATHS_H if you have paths.h and want to use the default PATH
# it specifies.
#
# Define NO_D_INO_IN_DIRENT if you don't have d_ino in your struct dirent.
#
# Define NO_D_TYPE_IN_DIRENT if your platform defines DT_UNKNOWN but lacks
# d_type in struct dirent (Cygwin 1.5, fixed in Cygwin 1.7).
#
# Define HAVE_STRINGS_H if you have strings.h and need it for strcasecmp.
#
# Define NO_STRCASESTR if you don't have strcasestr.
#
# Define NO_MEMMEM if you don't have memmem.
#
# Define NO_GETPAGESIZE if you don't have getpagesize.
#
# Define NO_STRLCPY if you don't have strlcpy.
#
# Define NO_STRTOUMAX if you don't have both strtoimax and strtoumax in the
# C library. If your compiler also does not support long long or does not have
# strtoull, define NO_STRTOULL.
#
# Define NO_SETENV if you don't have setenv in the C library.
#
# Define NO_UNSETENV if you don't have unsetenv in the C library.
#
# Define NO_MKDTEMP if you don't have mkdtemp in the C library.
#
# Define MKDIR_WO_TRAILING_SLASH if your mkdir() can't deal with trailing slash.
#
# Define NO_MKSTEMPS if you don't have mkstemps in the C library.
#
# Define NO_FNMATCH if you don't have fnmatch in the C library.
#
# Define NO_FNMATCH_CASEFOLD if your fnmatch function doesn't have the
# FNM_CASEFOLD GNU extension.
#
# Define NO_WILDMATCH if you do not want to use Git's wildmatch
# implementation as fnmatch
#
# Define NO_GECOS_IN_PWENT if you don't have pw_gecos in struct passwd
# in the C library.
#
# Define NO_LIBGEN_H if you don't have libgen.h.
#
# Define NEEDS_LIBGEN if your libgen needs -lgen when linking
#
# Define NO_SYS_SELECT_H if you don't have sys/select.h.
#
# Define NO_SYMLINK_HEAD if you never want .git/HEAD to be a symbolic link.
# Enable it on Windows. By default, symrefs are still used.
#
# Define NO_SVN_TESTS if you want to skip time-consuming SVN interoperability
# tests. These tests take up a significant amount of the total test time
# but are not needed unless you plan to talk to SVN repos.
#
# Define NO_FINK if you are building on Darwin/Mac OS X, have Fink
# installed in /sw, but don't want GIT to link against any libraries
# installed there. If defined you may specify your own (or Fink's)
# include directories and library directories by defining CFLAGS
# and LDFLAGS appropriately.
#
# Define NO_DARWIN_PORTS if you are building on Darwin/Mac OS X,
# have DarwinPorts installed in /opt/local, but don't want GIT to
# link against any libraries installed there. If defined you may
# specify your own (or DarwinPort's) include directories and
# library directories by defining CFLAGS and LDFLAGS appropriately.
#
# Define NO_APPLE_COMMON_CRYPTO if you are building on Darwin/Mac OS X
# and do not want to use Apple's CommonCrypto library. This allows you
# to provide your own OpenSSL library, for example from MacPorts.
#
# Define BLK_SHA1 environment variable to make use of the bundled
# optimized C SHA1 routine.
#
# Define PPC_SHA1 environment variable when running make to make use of
# a bundled SHA1 routine optimized for PowerPC.
#
# Define NEEDS_CRYPTO_WITH_SSL if you need -lcrypto when using -lssl (Darwin).
#
# Define NEEDS_SSL_WITH_CRYPTO if you need -lssl when using -lcrypto (Darwin).
#
# Define NEEDS_SSL_WITH_CURL if you need -lssl with -lcurl (Minix).
#
# Define NEEDS_IDN_WITH_CURL if you need -lidn when using -lcurl (Minix).
#
# Define NEEDS_LIBICONV if linking with libc is not enough (Darwin).
#
# Define NEEDS_LIBINTL_BEFORE_LIBICONV if you need libintl before libiconv.
#
# Define NO_INTPTR_T if you don't have intptr_t nor uintptr_t.
#
# Define NO_UINTMAX_T if you don't have uintmax_t.
#
# Define NEEDS_SOCKET if linking with libc is not enough (SunOS,
# Patrick Mauritz).
#
# Define NEEDS_RESOLV if linking with -lnsl and/or -lsocket is not enough.
# Notably on Solaris hstrerror resides in libresolv and on Solaris 7
# inet_ntop and inet_pton additionally reside there.
#
# Define NO_MMAP if you want to avoid mmap.
#
# Define NO_SYS_POLL_H if you don't have sys/poll.h.
#
# Define NO_POLL if you do not have or don't want to use poll().
# This also implies NO_SYS_POLL_H.
#
# Define NEEDS_SYS_PARAM_H if you need to include sys/param.h to compile,
# *PLEASE* REPORT to git@vger.kernel.org if your platform needs this;
# we want to know more about the issue.
#
# Define NO_PTHREADS if you do not have or do not want to use Pthreads.
#
# Define NO_PREAD if you have a problem with pread() system call (e.g.
# cygwin1.dll before v1.5.22).
#
# Define NO_SETITIMER if you don't have setitimer()
#
# Define NO_STRUCT_ITIMERVAL if you don't have struct itimerval
# This also implies NO_SETITIMER
#
# Define NO_THREAD_SAFE_PREAD if your pread() implementation is not
# thread-safe. (e.g. compat/pread.c or cygwin)
#
# Define NO_FAST_WORKING_DIRECTORY if accessing objects in pack files is
# generally faster on your platform than accessing the working directory.
#
# Define NO_TRUSTABLE_FILEMODE if your filesystem may claim to support
# the executable mode bit, but doesn't really do so.
#
# Define NO_IPV6 if you lack IPv6 support and getaddrinfo().
#
# Define NO_UNIX_SOCKETS if your system does not offer unix sockets.
#
# Define NO_SOCKADDR_STORAGE if your platform does not have struct
# sockaddr_storage.
#
# Define NO_ICONV if your libc does not properly support iconv.
#
# Define OLD_ICONV if your library has an old iconv(), where the second
# (input buffer pointer) parameter is declared with type (const char **).
#
# Define NO_DEFLATE_BOUND if your zlib does not have deflateBound.
#
# Define NO_R_TO_GCC_LINKER if your gcc does not like "-R/path/lib"
# that tells runtime paths to dynamic libraries;
# "-Wl,-rpath=/path/lib" is used instead.
#
# Define NO_NORETURN if using buggy versions of gcc 4.6+ and profile feedback,
# as the compiler can crash (http://gcc.gnu.org/bugzilla/show_bug.cgi?id=49299)
#
# Define USE_NSEC below if you want git to care about sub-second file mtimes
# and ctimes. Note that you need recent glibc (at least 2.2.4) for this, and
# it will BREAK YOUR LOCAL DIFFS! show-diff and anything using it will likely
# randomly break unless your underlying filesystem supports those sub-second
# times (my ext3 doesn't).
#
# Define USE_ST_TIMESPEC if your "struct stat" uses "st_ctimespec" instead of
# "st_ctim"
#
# Define NO_NSEC if your "struct stat" does not have "st_ctim.tv_nsec"
# available. This automatically turns USE_NSEC off.
#
# Define USE_STDEV below if you want git to care about the underlying device
# change being considered an inode change from the update-index perspective.
#
# Define NO_ST_BLOCKS_IN_STRUCT_STAT if your platform does not have st_blocks
# field that counts the on-disk footprint in 512-byte blocks.
#
# Define DOCBOOK_XSL_172 if you want to format man pages with DocBook XSL v1.72
# (not v1.73 or v1.71).
#
# Define ASCIIDOC_ROFF if your DocBook XSL does not escape raw roff directives
# (versions 1.68.1 through v1.72).
#
# Define GNU_ROFF if your target system uses GNU groff. This forces
# apostrophes to be ASCII so that cut&pasting examples to the shell
# will work.
#
# Define PERL_PATH to the path of your Perl binary (usually /usr/bin/perl).
#
# Define NO_PERL_MAKEMAKER if you cannot use Makefiles generated by perl's
# MakeMaker (e.g. using ActiveState under Cygwin).
#
# Define NO_PERL if you do not want Perl scripts or libraries at all.
#
# Define PYTHON_PATH to the path of your Python binary (often /usr/bin/python
# but /usr/bin/python2.7 on some platforms).
#
# Define NO_PYTHON if you do not want Python scripts or libraries at all.
#
# Define NO_TCLTK if you do not want Tcl/Tk GUI.
#
# The TCL_PATH variable governs the location of the Tcl interpreter
# used to optimize git-gui for your system. Only used if NO_TCLTK
# is not set. Defaults to the bare 'tclsh'.
#
# The TCLTK_PATH variable governs the location of the Tcl/Tk interpreter.
# If not set it defaults to the bare 'wish'. If it is set to the empty
# string then NO_TCLTK will be forced (this is used by configure script).
#
# Define INTERNAL_QSORT to use Git's implementation of qsort(), which
# is a simplified version of the merge sort used in glibc. This is
# recommended if Git triggers O(n^2) behavior in your platform's qsort().
#
# Define UNRELIABLE_FSTAT if your system's fstat does not return the same
# information on a not yet closed file that lstat would return for the same
# file after it was closed.
#
# Define OBJECT_CREATION_USES_RENAMES if your operating systems has problems
# when hardlinking a file to another name and unlinking the original file right
# away (some NTFS drivers seem to zero the contents in that scenario).
#
# Define NO_CROSS_DIRECTORY_HARDLINKS if you plan to distribute the installed
# programs as a tar, where bin/ and libexec/ might be on different file systems.
#
# Define NO_INSTALL_HARDLINKS if you prefer to use either symbolic links or
# copies to install built-in git commands e.g. git-cat-file.
#
# Define USE_NED_ALLOCATOR if you want to replace the platforms default
# memory allocators with the nedmalloc allocator written by Niall Douglas.
#
# Define NO_REGEX if you have no or inferior regex support in your C library.
#
# Define HAVE_DEV_TTY if your system can open /dev/tty to interact with the
# user.
#
# Define GETTEXT_POISON if you are debugging the choice of strings marked
# for translation. In a GETTEXT_POISON build, you can turn all strings marked
# for translation into gibberish by setting the GIT_GETTEXT_POISON variable
# (to any value) in your environment.
#
# Define JSMIN to point to JavaScript minifier that functions as
# a filter to have gitweb.js minified.
#
# Define CSSMIN to point to a CSS minifier in order to generate a minified
# version of gitweb.css
#
# Define DEFAULT_PAGER to a sensible pager command (defaults to "less") if
# you want to use something different. The value will be interpreted by the
# shell at runtime when it is used.
#
# Define DEFAULT_EDITOR to a sensible editor command (defaults to "vi") if you
# want to use something different. The value will be interpreted by the shell
# if necessary when it is used. Examples:
#
# DEFAULT_EDITOR='~/bin/vi',
# DEFAULT_EDITOR='$GIT_FALLBACK_EDITOR',
# DEFAULT_EDITOR='"C:\Program Files\Vim\gvim.exe" --nofork'
#
# Define COMPUTE_HEADER_DEPENDENCIES to "yes" if you want dependencies on
# header files to be automatically computed, to avoid rebuilding objects when
# an unrelated header file changes. Define it to "no" to use the hard-coded
# dependency rules. The default is "auto", which means to use computed header
# dependencies if your compiler is detected to support it.
#
# Define CHECK_HEADER_DEPENDENCIES to check for problems in the hard-coded
# dependency rules.
#
# Define NATIVE_CRLF if your platform uses CRLF for line endings.
#
# Define XDL_FAST_HASH to use an alternative line-hashing method in
# the diff algorithm. It gives a nice speedup if your processor has
# fast unaligned word loads. Does NOT work on big-endian systems!
# Enabled by default on x86_64.
#
# Define GIT_USER_AGENT if you want to change how git identifies itself during
# network interactions. The default is "git/$(GIT_VERSION)".
#
# Define DEFAULT_HELP_FORMAT to "man", "info" or "html"
# (defaults to "man") if you want to have a different default when
# "git help" is called without a parameter specifying the format.
GIT-VERSION-FILE: FORCE
@$(SHELL_PATH) ./GIT-VERSION-GEN
-include GIT-VERSION-FILE
# CFLAGS and LDFLAGS are for the users to override from the command line.
CFLAGS = -g -O2 -Wall
LDFLAGS =
ALL_CFLAGS = $(CPPFLAGS) $(CFLAGS)
ALL_LDFLAGS = $(LDFLAGS)
STRIP ?= strip
# Among the variables below, these:
# gitexecdir
# template_dir
# sysconfdir
# can be specified as a relative path some/where/else;
# this is interpreted as relative to $(prefix) and "git" at
# runtime figures out where they are based on the path to the executable.
# Additionally, the following will be treated as relative by "git" if they
# begin with "$(prefix)/":
# mandir
# infodir
# htmldir
# This can help installing the suite in a relocatable way.
prefix = $(HOME)
bindir_relative = bin
bindir = $(prefix)/$(bindir_relative)
mandir = $(prefix)/share/man
infodir = $(prefix)/share/info
gitexecdir = libexec/git-core
mergetoolsdir = $(gitexecdir)/mergetools
sharedir = $(prefix)/share
gitwebdir = $(sharedir)/gitweb
localedir = $(sharedir)/locale
template_dir = share/git-core/templates
htmldir = $(prefix)/share/doc/git-doc
ETC_GITCONFIG = $(sysconfdir)/gitconfig
ETC_GITATTRIBUTES = $(sysconfdir)/gitattributes
lib = lib
# DESTDIR =
pathsep = :
mandir_relative = $(patsubst $(prefix)/%,%,$(mandir))
infodir_relative = $(patsubst $(prefix)/%,%,$(infodir))
htmldir_relative = $(patsubst $(prefix)/%,%,$(htmldir))
export prefix bindir sharedir sysconfdir gitwebdir localedir
CC = cc
AR = ar
RM = rm -f
DIFF = diff
TAR = tar
FIND = find
INSTALL = install
RPMBUILD = rpmbuild
TCL_PATH = tclsh
TCLTK_PATH = wish
XGETTEXT = xgettext
MSGFMT = msgfmt
PTHREAD_LIBS = -lpthread
PTHREAD_CFLAGS =
GCOV = gcov
export TCL_PATH TCLTK_PATH
SPARSE_FLAGS =
### --- END CONFIGURATION SECTION ---
# Those must not be GNU-specific; they are shared with perl/ which may
# be built by a different compiler. (Note that this is an artifact now
# but it still might be nice to keep that distinction.)
BASIC_CFLAGS = -I.
BASIC_LDFLAGS =
# Guard against environment variables
BUILTIN_OBJS =
BUILT_INS =
COMPAT_CFLAGS =
COMPAT_OBJS =
XDIFF_OBJS =
VCSSVN_OBJS =
GENERATED_H =
EXTRA_CPPFLAGS =
LIB_H =
LIB_OBJS =
PROGRAM_OBJS =
PROGRAMS =
SCRIPT_PERL =
SCRIPT_PYTHON =
SCRIPT_SH =
SCRIPT_LIB =
TEST_PROGRAMS_NEED_X =
# Having this variable in your environment would break pipelines because
# you cause "cd" to echo its destination to stdout. It can also take
# scripts to unexpected places. If you like CDPATH, define it for your
# interactive shell sessions without exporting it.
unexport CDPATH
SCRIPT_SH += git-am.sh
SCRIPT_SH += git-bisect.sh
SCRIPT_SH += git-difftool--helper.sh
SCRIPT_SH += git-filter-branch.sh
SCRIPT_SH += git-lost-found.sh
SCRIPT_SH += git-merge-octopus.sh
SCRIPT_SH += git-merge-one-file.sh
SCRIPT_SH += git-merge-resolve.sh
SCRIPT_SH += git-mergetool.sh
SCRIPT_SH += git-pull.sh
SCRIPT_SH += git-quiltimport.sh
SCRIPT_SH += git-rebase.sh
SCRIPT_SH += git-remote-testgit.sh
SCRIPT_SH += git-request-pull.sh
SCRIPT_SH += git-stash.sh
SCRIPT_SH += git-submodule.sh
SCRIPT_SH += git-web--browse.sh
SCRIPT_LIB += git-mergetool--lib
SCRIPT_LIB += git-parse-remote
SCRIPT_LIB += git-rebase--am
SCRIPT_LIB += git-rebase--interactive
SCRIPT_LIB += git-rebase--merge
SCRIPT_LIB += git-sh-setup
SCRIPT_LIB += git-sh-i18n
SCRIPT_PERL += git-add--interactive.perl
SCRIPT_PERL += git-difftool.perl
SCRIPT_PERL += git-archimport.perl
SCRIPT_PERL += git-cvsexportcommit.perl
SCRIPT_PERL += git-cvsimport.perl
SCRIPT_PERL += git-cvsserver.perl
SCRIPT_PERL += git-relink.perl
SCRIPT_PERL += git-send-email.perl
SCRIPT_PERL += git-svn.perl
SCRIPT_PYTHON += git-p4.py
NO_INSTALL += git-remote-testgit
# Generated files for scripts
SCRIPT_SH_GEN = $(patsubst %.sh,%,$(SCRIPT_SH))
SCRIPT_PERL_GEN = $(patsubst %.perl,%,$(SCRIPT_PERL))
SCRIPT_PYTHON_GEN = $(patsubst %.py,%,$(SCRIPT_PYTHON))
SCRIPT_SH_INS = $(filter-out $(NO_INSTALL),$(SCRIPT_SH_GEN))
SCRIPT_PERL_INS = $(filter-out $(NO_INSTALL),$(SCRIPT_PERL_GEN))
SCRIPT_PYTHON_INS = $(filter-out $(NO_INSTALL),$(SCRIPT_PYTHON_GEN))
# Individual rules to allow e.g.
# "make -C ../.. SCRIPT_PERL=contrib/foo/bar.perl build-perl-script"
# from subdirectories like contrib/*/
.PHONY: build-perl-script build-sh-script build-python-script
build-perl-script: $(SCRIPT_PERL_GEN)
build-sh-script: $(SCRIPT_SH_GEN)
build-python-script: $(SCRIPT_PYTHON_GEN)
.PHONY: install-perl-script install-sh-script install-python-script
install-sh-script: $(SCRIPT_SH_INS)
$(INSTALL) $^ '$(DESTDIR_SQ)$(gitexec_instdir_SQ)'
install-perl-script: $(SCRIPT_PERL_INS)
$(INSTALL) $^ '$(DESTDIR_SQ)$(gitexec_instdir_SQ)'
install-python-script: $(SCRIPT_PYTHON_INS)
$(INSTALL) $^ '$(DESTDIR_SQ)$(gitexec_instdir_SQ)'
.PHONY: clean-perl-script clean-sh-script clean-python-script
clean-sh-script:
$(RM) $(SCRIPT_SH_GEN)
clean-perl-script:
$(RM) $(SCRIPT_PERL_GEN)
clean-python-script:
$(RM) $(SCRIPT_PYTHON_GEN)
SCRIPTS = $(SCRIPT_SH_INS) \
$(SCRIPT_PERL_INS) \
$(SCRIPT_PYTHON_INS) \
git-instaweb
ETAGS_TARGET = TAGS
# Empty...
EXTRA_PROGRAMS =
# ... and all the rest that could be moved out of bindir to gitexecdir
PROGRAMS += $(EXTRA_PROGRAMS)
PROGRAM_OBJS += credential-store.o
PROGRAM_OBJS += daemon.o
PROGRAM_OBJS += fast-import.o
PROGRAM_OBJS += http-backend.o
PROGRAM_OBJS += imap-send.o
PROGRAM_OBJS += sh-i18n--envsubst.o
PROGRAM_OBJS += shell.o
PROGRAM_OBJS += show-index.o
PROGRAM_OBJS += upload-pack.o
PROGRAM_OBJS += remote-testsvn.o
# Binary suffix, set to .exe for Windows builds
X =
PROGRAMS += $(patsubst %.o,git-%$X,$(PROGRAM_OBJS))
TEST_PROGRAMS_NEED_X += test-chmtime
TEST_PROGRAMS_NEED_X += test-ctype
TEST_PROGRAMS_NEED_X += test-date
TEST_PROGRAMS_NEED_X += test-delta
TEST_PROGRAMS_NEED_X += test-dump-cache-tree
TEST_PROGRAMS_NEED_X += test-genrandom
TEST_PROGRAMS_NEED_X += test-index-version
TEST_PROGRAMS_NEED_X += test-line-buffer
TEST_PROGRAMS_NEED_X += test-match-trees
TEST_PROGRAMS_NEED_X += test-mergesort
TEST_PROGRAMS_NEED_X += test-mktemp
TEST_PROGRAMS_NEED_X += test-parse-options
TEST_PROGRAMS_NEED_X += test-path-utils
TEST_PROGRAMS_NEED_X += test-prio-queue
TEST_PROGRAMS_NEED_X += test-read-cache
TEST_PROGRAMS_NEED_X += test-regex
TEST_PROGRAMS_NEED_X += test-revision-walking
TEST_PROGRAMS_NEED_X += test-run-command
TEST_PROGRAMS_NEED_X += test-scrap-cache-tree
TEST_PROGRAMS_NEED_X += test-sha1
TEST_PROGRAMS_NEED_X += test-sigchain
TEST_PROGRAMS_NEED_X += test-string-list
TEST_PROGRAMS_NEED_X += test-subprocess
TEST_PROGRAMS_NEED_X += test-svn-fe
TEST_PROGRAMS_NEED_X += test-urlmatch-normalization
TEST_PROGRAMS_NEED_X += test-wildmatch
TEST_PROGRAMS = $(patsubst %,%$X,$(TEST_PROGRAMS_NEED_X))
# List built-in command $C whose implementation cmd_$C() is not in
# builtin/$C.o but is linked in as part of some other command.
BUILT_INS += $(patsubst builtin/%.o,git-%$X,$(BUILTIN_OBJS))
BUILT_INS += git-cherry$X
BUILT_INS += git-cherry-pick$X
BUILT_INS += git-format-patch$X
BUILT_INS += git-fsck-objects$X
BUILT_INS += git-get-tar-commit-id$X
BUILT_INS += git-init$X
BUILT_INS += git-merge-subtree$X
BUILT_INS += git-peek-remote$X
BUILT_INS += git-repo-config$X
BUILT_INS += git-show$X
BUILT_INS += git-stage$X
BUILT_INS += git-status$X
BUILT_INS += git-whatchanged$X
# what 'all' will build and 'install' will install in gitexecdir,
# excluding programs for built-in commands
ALL_PROGRAMS = $(PROGRAMS) $(SCRIPTS)
# what 'all' will build but not install in gitexecdir
OTHER_PROGRAMS = git$X
# what test wrappers are needed and 'install' will install, in bindir
BINDIR_PROGRAMS_NEED_X += git
BINDIR_PROGRAMS_NEED_X += git-upload-pack
BINDIR_PROGRAMS_NEED_X += git-receive-pack
BINDIR_PROGRAMS_NEED_X += git-upload-archive
BINDIR_PROGRAMS_NEED_X += git-shell
BINDIR_PROGRAMS_NO_X += git-cvsserver
# Set paths to tools early so that they can be used for version tests.
ifndef SHELL_PATH
SHELL_PATH = /bin/sh
endif
ifndef PERL_PATH
PERL_PATH = /usr/bin/perl
endif
ifndef PYTHON_PATH
PYTHON_PATH = /usr/bin/python
endif
export PERL_PATH
export PYTHON_PATH
LIB_FILE = libgit.a
XDIFF_LIB = xdiff/lib.a
VCSSVN_LIB = vcs-svn/lib.a
GENERATED_H += common-cmds.h
LIB_H += advice.h
LIB_H += archive.h
LIB_H += argv-array.h
LIB_H += attr.h
LIB_H += bisect.h
LIB_H += blob.h
LIB_H += branch.h
LIB_H += builtin.h
LIB_H += bulk-checkin.h
LIB_H += bundle.h
LIB_H += cache-tree.h
LIB_H += cache.h
LIB_H += color.h
LIB_H += column.h
LIB_H += commit.h
LIB_H += compat/bswap.h
LIB_H += compat/mingw.h
LIB_H += compat/obstack.h
LIB_H += compat/poll/poll.h
LIB_H += compat/precompose_utf8.h
LIB_H += compat/terminal.h
LIB_H += compat/win32/dirent.h
LIB_H += compat/win32/pthread.h
LIB_H += compat/win32/syslog.h
LIB_H += connected.h
LIB_H += convert.h
LIB_H += credential.h
LIB_H += csum-file.h
LIB_H += decorate.h
LIB_H += delta.h
LIB_H += diff.h
LIB_H += diffcore.h
LIB_H += dir.h
LIB_H += exec_cmd.h
LIB_H += ewah/ewok.h
LIB_H += ewah/ewok_rlw.h
LIB_H += fetch-pack.h
LIB_H += fmt-merge-msg.h
LIB_H += fsck.h
LIB_H += gettext.h
LIB_H += git-compat-util.h
LIB_H += gpg-interface.h
LIB_H += graph.h
LIB_H += grep.h
LIB_H += hash.h
LIB_H += help.h
LIB_H += http.h
LIB_H += kwset.h
LIB_H += levenshtein.h
LIB_H += line-log.h
LIB_H += line-range.h
LIB_H += list-objects.h
LIB_H += ll-merge.h
LIB_H += log-tree.h
LIB_H += mailmap.h
LIB_H += merge-blobs.h
LIB_H += merge-recursive.h
LIB_H += mergesort.h
LIB_H += notes-cache.h
LIB_H += notes-merge.h
LIB_H += notes-utils.h
LIB_H += notes.h
LIB_H += object.h
LIB_H += pack-objects.h
LIB_H += pack-revindex.h
LIB_H += pack.h
LIB_H += pack-bitmap.h
LIB_H += parse-options.h
LIB_H += patch-ids.h
LIB_H += pathspec.h
LIB_H += pkt-line.h
LIB_H += prio-queue.h
LIB_H += progress.h
LIB_H += prompt.h
LIB_H += quote.h
LIB_H += reachable.h
LIB_H += reflog-walk.h
LIB_H += refs.h
LIB_H += remote.h
LIB_H += rerere.h
LIB_H += resolve-undo.h
LIB_H += revision.h
LIB_H += run-command.h
LIB_H += send-pack.h
LIB_H += sequencer.h
LIB_H += sha1-array.h
LIB_H += sha1-lookup.h
LIB_H += shortlog.h
LIB_H += sideband.h
LIB_H += sigchain.h
LIB_H += strbuf.h
LIB_H += streaming.h
LIB_H += string-list.h
LIB_H += submodule.h
LIB_H += tag.h
LIB_H += tar.h
LIB_H += thread-utils.h
LIB_H += transport.h
LIB_H += tree-walk.h
LIB_H += tree.h
LIB_H += unpack-trees.h
LIB_H += url.h
LIB_H += urlmatch.h
LIB_H += userdiff.h
LIB_H += utf8.h
LIB_H += varint.h
LIB_H += vcs-svn/fast_export.h
LIB_H += vcs-svn/line_buffer.h
LIB_H += vcs-svn/repo_tree.h
LIB_H += vcs-svn/sliding_window.h
LIB_H += vcs-svn/svndiff.h
LIB_H += vcs-svn/svndump.h
LIB_H += walker.h
LIB_H += wildmatch.h
LIB_H += wt-status.h
LIB_H += xdiff-interface.h
LIB_H += xdiff/xdiff.h
LIB_H += xdiff/xdiffi.h
LIB_H += xdiff/xemit.h
LIB_H += xdiff/xinclude.h
LIB_H += xdiff/xmacros.h
LIB_H += xdiff/xprepare.h
LIB_H += xdiff/xtypes.h
LIB_H += xdiff/xutils.h
LIB_OBJS += abspath.o
LIB_OBJS += advice.o
LIB_OBJS += alias.o
LIB_OBJS += alloc.o
LIB_OBJS += archive.o
LIB_OBJS += archive-tar.o
LIB_OBJS += archive-zip.o
LIB_OBJS += argv-array.o
LIB_OBJS += attr.o
LIB_OBJS += base85.o
LIB_OBJS += bisect.o
LIB_OBJS += blob.o
LIB_OBJS += branch.o
LIB_OBJS += bulk-checkin.o
LIB_OBJS += bundle.o
LIB_OBJS += cache-tree.o
LIB_OBJS += color.o
LIB_OBJS += column.o
LIB_OBJS += combine-diff.o
LIB_OBJS += commit.o
LIB_OBJS += compat/obstack.o
LIB_OBJS += compat/terminal.o
LIB_OBJS += config.o
LIB_OBJS += connect.o
LIB_OBJS += connected.o
LIB_OBJS += convert.o
LIB_OBJS += copy.o
LIB_OBJS += credential.o
LIB_OBJS += csum-file.o
LIB_OBJS += ctype.o
LIB_OBJS += date.o
LIB_OBJS += decorate.o
LIB_OBJS += diffcore-break.o
LIB_OBJS += diffcore-delta.o
LIB_OBJS += diffcore-order.o
LIB_OBJS += diffcore-pickaxe.o
LIB_OBJS += diffcore-rename.o
LIB_OBJS += diff-delta.o
LIB_OBJS += diff-lib.o
LIB_OBJS += diff-no-index.o
LIB_OBJS += diff.o
LIB_OBJS += dir.o
LIB_OBJS += editor.o
LIB_OBJS += entry.o
LIB_OBJS += environment.o
LIB_OBJS += ewah/bitmap.o
LIB_OBJS += ewah/ewah_bitmap.o
LIB_OBJS += ewah/ewah_io.o
LIB_OBJS += ewah/ewah_rlw.o
LIB_OBJS += exec_cmd.o
LIB_OBJS += fetch-pack.o
LIB_OBJS += fsck.o
LIB_OBJS += gettext.o
LIB_OBJS += gpg-interface.o
LIB_OBJS += graph.o
LIB_OBJS += grep.o
LIB_OBJS += hash.o
LIB_OBJS += help.o
LIB_OBJS += hex.o
LIB_OBJS += ident.o
LIB_OBJS += kwset.o
LIB_OBJS += levenshtein.o
LIB_OBJS += line-log.o
LIB_OBJS += line-range.o
LIB_OBJS += list-objects.o
LIB_OBJS += ll-merge.o
LIB_OBJS += lockfile.o
LIB_OBJS += log-tree.o
LIB_OBJS += mailmap.o
LIB_OBJS += match-trees.o
LIB_OBJS += merge.o
LIB_OBJS += merge-blobs.o
LIB_OBJS += merge-recursive.o
LIB_OBJS += mergesort.o
LIB_OBJS += name-hash.o
LIB_OBJS += notes.o
LIB_OBJS += notes-cache.o
LIB_OBJS += notes-merge.o
LIB_OBJS += notes-utils.o
LIB_OBJS += object.o
LIB_OBJS += pack-bitmap.o
LIB_OBJS += pack-bitmap-write.o
LIB_OBJS += pack-check.o
LIB_OBJS += pack-objects.o
LIB_OBJS += pack-revindex.o
LIB_OBJS += pack-write.o
LIB_OBJS += pager.o
LIB_OBJS += parse-options.o
LIB_OBJS += parse-options-cb.o
LIB_OBJS += patch-delta.o
LIB_OBJS += patch-ids.o
LIB_OBJS += path.o
LIB_OBJS += pathspec.o
LIB_OBJS += pkt-line.o
LIB_OBJS += preload-index.o
LIB_OBJS += pretty.o
LIB_OBJS += prio-queue.o
LIB_OBJS += progress.o
LIB_OBJS += prompt.o
LIB_OBJS += quote.o
LIB_OBJS += reachable.o
LIB_OBJS += read-cache.o
LIB_OBJS += reflog-walk.o
LIB_OBJS += refs.o
LIB_OBJS += remote.o
LIB_OBJS += replace_object.o
LIB_OBJS += rerere.o
LIB_OBJS += resolve-undo.o
LIB_OBJS += revision.o
LIB_OBJS += run-command.o
LIB_OBJS += send-pack.o
LIB_OBJS += sequencer.o
LIB_OBJS += server-info.o
LIB_OBJS += setup.o
LIB_OBJS += sha1-array.o
LIB_OBJS += sha1-lookup.o
LIB_OBJS += sha1_file.o
LIB_OBJS += sha1_name.o
LIB_OBJS += shallow.o
LIB_OBJS += sideband.o
LIB_OBJS += sigchain.o
LIB_OBJS += strbuf.o
LIB_OBJS += streaming.o
LIB_OBJS += string-list.o
LIB_OBJS += submodule.o
LIB_OBJS += symlinks.o
LIB_OBJS += tag.o
LIB_OBJS += trace.o
LIB_OBJS += transport.o
LIB_OBJS += transport-helper.o
LIB_OBJS += tree-diff.o
LIB_OBJS += tree.o
LIB_OBJS += tree-walk.o
LIB_OBJS += unpack-trees.o
LIB_OBJS += url.o
LIB_OBJS += urlmatch.o
LIB_OBJS += usage.o
LIB_OBJS += userdiff.o
LIB_OBJS += utf8.o
LIB_OBJS += varint.o
LIB_OBJS += version.o
LIB_OBJS += walker.o
LIB_OBJS += wildmatch.o
LIB_OBJS += wrapper.o
LIB_OBJS += write_or_die.o
LIB_OBJS += ws.o
LIB_OBJS += wt-status.o
LIB_OBJS += xdiff-interface.o
LIB_OBJS += zlib.o
BUILTIN_OBJS += builtin/add.o
BUILTIN_OBJS += builtin/annotate.o
BUILTIN_OBJS += builtin/apply.o
BUILTIN_OBJS += builtin/archive.o
BUILTIN_OBJS += builtin/bisect--helper.o
BUILTIN_OBJS += builtin/blame.o
BUILTIN_OBJS += builtin/branch.o
BUILTIN_OBJS += builtin/bundle.o
BUILTIN_OBJS += builtin/cat-file.o
BUILTIN_OBJS += builtin/check-attr.o
BUILTIN_OBJS += builtin/check-ignore.o
BUILTIN_OBJS += builtin/check-mailmap.o
BUILTIN_OBJS += builtin/check-ref-format.o
BUILTIN_OBJS += builtin/checkout-index.o
BUILTIN_OBJS += builtin/checkout.o
BUILTIN_OBJS += builtin/clean.o
BUILTIN_OBJS += builtin/clone.o
BUILTIN_OBJS += builtin/column.o
BUILTIN_OBJS += builtin/commit-tree.o
BUILTIN_OBJS += builtin/commit.o
BUILTIN_OBJS += builtin/config.o
BUILTIN_OBJS += builtin/count-objects.o
BUILTIN_OBJS += builtin/credential.o
BUILTIN_OBJS += builtin/describe.o
BUILTIN_OBJS += builtin/diff-files.o
BUILTIN_OBJS += builtin/diff-index.o
BUILTIN_OBJS += builtin/diff-tree.o
BUILTIN_OBJS += builtin/diff.o
BUILTIN_OBJS += builtin/fast-export.o
BUILTIN_OBJS += builtin/fetch-pack.o
BUILTIN_OBJS += builtin/fetch.o
BUILTIN_OBJS += builtin/fmt-merge-msg.o
BUILTIN_OBJS += builtin/for-each-ref.o
BUILTIN_OBJS += builtin/fsck.o
BUILTIN_OBJS += builtin/gc.o
BUILTIN_OBJS += builtin/grep.o
BUILTIN_OBJS += builtin/hash-object.o
BUILTIN_OBJS += builtin/help.o
BUILTIN_OBJS += builtin/index-pack.o
BUILTIN_OBJS += builtin/init-db.o
BUILTIN_OBJS += builtin/log.o
BUILTIN_OBJS += builtin/ls-files.o
BUILTIN_OBJS += builtin/ls-remote.o
BUILTIN_OBJS += builtin/ls-tree.o
BUILTIN_OBJS += builtin/mailinfo.o
BUILTIN_OBJS += builtin/mailsplit.o
BUILTIN_OBJS += builtin/merge.o
BUILTIN_OBJS += builtin/merge-base.o
BUILTIN_OBJS += builtin/merge-file.o
BUILTIN_OBJS += builtin/merge-index.o
BUILTIN_OBJS += builtin/merge-ours.o
BUILTIN_OBJS += builtin/merge-recursive.o
BUILTIN_OBJS += builtin/merge-tree.o
BUILTIN_OBJS += builtin/mktag.o
BUILTIN_OBJS += builtin/mktree.o
BUILTIN_OBJS += builtin/mv.o
BUILTIN_OBJS += builtin/name-rev.o
BUILTIN_OBJS += builtin/notes.o
BUILTIN_OBJS += builtin/pack-objects.o
BUILTIN_OBJS += builtin/pack-redundant.o
BUILTIN_OBJS += builtin/pack-refs.o
BUILTIN_OBJS += builtin/patch-id.o
BUILTIN_OBJS += builtin/prune-packed.o
BUILTIN_OBJS += builtin/prune.o
BUILTIN_OBJS += builtin/push.o
BUILTIN_OBJS += builtin/read-tree.o
BUILTIN_OBJS += builtin/receive-pack.o
BUILTIN_OBJS += builtin/reflog.o
BUILTIN_OBJS += builtin/remote.o
BUILTIN_OBJS += builtin/remote-ext.o
BUILTIN_OBJS += builtin/remote-fd.o
BUILTIN_OBJS += builtin/repack.o
BUILTIN_OBJS += builtin/replace.o
BUILTIN_OBJS += builtin/rerere.o
BUILTIN_OBJS += builtin/reset.o
BUILTIN_OBJS += builtin/rev-list.o
BUILTIN_OBJS += builtin/rev-parse.o
BUILTIN_OBJS += builtin/revert.o
BUILTIN_OBJS += builtin/rm.o
BUILTIN_OBJS += builtin/send-pack.o
BUILTIN_OBJS += builtin/shortlog.o
BUILTIN_OBJS += builtin/show-branch.o
BUILTIN_OBJS += builtin/show-ref.o
BUILTIN_OBJS += builtin/stripspace.o
BUILTIN_OBJS += builtin/symbolic-ref.o
BUILTIN_OBJS += builtin/tag.o
BUILTIN_OBJS += builtin/tar-tree.o
BUILTIN_OBJS += builtin/unpack-file.o
BUILTIN_OBJS += builtin/unpack-objects.o
BUILTIN_OBJS += builtin/update-index.o
BUILTIN_OBJS += builtin/update-ref.o
BUILTIN_OBJS += builtin/update-server-info.o
BUILTIN_OBJS += builtin/upload-archive.o
BUILTIN_OBJS += builtin/var.o
BUILTIN_OBJS += builtin/verify-pack.o
BUILTIN_OBJS += builtin/verify-tag.o
BUILTIN_OBJS += builtin/write-tree.o
GITLIBS = $(LIB_FILE) $(XDIFF_LIB)
EXTLIBS =
GIT_USER_AGENT = git/$(GIT_VERSION)
include config.mak.uname
-include config.mak.autogen
-include config.mak
ifndef sysconfdir
ifeq ($(prefix),/usr)
sysconfdir = /etc
else
sysconfdir = etc
endif
endif
ifdef CHECK_HEADER_DEPENDENCIES
COMPUTE_HEADER_DEPENDENCIES = no
USE_COMPUTED_HEADER_DEPENDENCIES =
endif
ifndef COMPUTE_HEADER_DEPENDENCIES
COMPUTE_HEADER_DEPENDENCIES = auto
endif
ifeq ($(COMPUTE_HEADER_DEPENDENCIES),auto)
dep_check = $(shell $(CC) $(ALL_CFLAGS) \
-c -MF /dev/null -MQ /dev/null -MMD -MP \
-x c /dev/null -o /dev/null 2>&1; \
echo $$?)
ifeq ($(dep_check),0)
override COMPUTE_HEADER_DEPENDENCIES = yes
else
override COMPUTE_HEADER_DEPENDENCIES = no
endif
endif
ifeq ($(COMPUTE_HEADER_DEPENDENCIES),yes)
USE_COMPUTED_HEADER_DEPENDENCIES = YesPlease
else
ifneq ($(COMPUTE_HEADER_DEPENDENCIES),no)
$(error please set COMPUTE_HEADER_DEPENDENCIES to yes, no, or auto \
(not "$(COMPUTE_HEADER_DEPENDENCIES)"))
endif
endif
ifdef SANE_TOOL_PATH
SANE_TOOL_PATH_SQ = $(subst ','\'',$(SANE_TOOL_PATH))
BROKEN_PATH_FIX = 's|^\# @@BROKEN_PATH_FIX@@$$|git_broken_path_fix $(SANE_TOOL_PATH_SQ)|'
PATH := $(SANE_TOOL_PATH):${PATH}
else
BROKEN_PATH_FIX = '/^\# @@BROKEN_PATH_FIX@@$$/d'
endif
ifneq (,$(INLINE))
BASIC_CFLAGS += -Dinline=$(INLINE)
endif
ifneq (,$(SOCKLEN_T))
BASIC_CFLAGS += -Dsocklen_t=$(SOCKLEN_T)
endif
ifeq ($(uname_S),Darwin)
ifndef NO_FINK
ifeq ($(shell test -d /sw/lib && echo y),y)
BASIC_CFLAGS += -I/sw/include
BASIC_LDFLAGS += -L/sw/lib
endif
endif
ifndef NO_DARWIN_PORTS
ifeq ($(shell test -d /opt/local/lib && echo y),y)
BASIC_CFLAGS += -I/opt/local/include
BASIC_LDFLAGS += -L/opt/local/lib
endif
endif
ifndef NO_APPLE_COMMON_CRYPTO
APPLE_COMMON_CRYPTO = YesPlease
COMPAT_CFLAGS += -DAPPLE_COMMON_CRYPTO
endif
NO_REGEX = YesPlease
PTHREAD_LIBS =
endif
ifndef CC_LD_DYNPATH
ifdef NO_R_TO_GCC_LINKER
# Some gcc does not accept and pass -R to the linker to specify
# the runtime dynamic library path.
CC_LD_DYNPATH = -Wl,-rpath,
else
CC_LD_DYNPATH = -R
endif
endif
ifdef NO_LIBGEN_H
COMPAT_CFLAGS += -DNO_LIBGEN_H
COMPAT_OBJS += compat/basename.o
endif
ifdef USE_LIBPCRE
BASIC_CFLAGS += -DUSE_LIBPCRE
ifdef LIBPCREDIR
BASIC_CFLAGS += -I$(LIBPCREDIR)/include
EXTLIBS += -L$(LIBPCREDIR)/$(lib) $(CC_LD_DYNPATH)$(LIBPCREDIR)/$(lib)
endif
EXTLIBS += -lpcre
endif
ifdef NO_CURL
BASIC_CFLAGS += -DNO_CURL
REMOTE_CURL_PRIMARY =
REMOTE_CURL_ALIASES =
REMOTE_CURL_NAMES =
else
ifdef CURLDIR
# Try "-Wl,-rpath=$(CURLDIR)/$(lib)" in such a case.
BASIC_CFLAGS += -I$(CURLDIR)/include
CURL_LIBCURL = -L$(CURLDIR)/$(lib) $(CC_LD_DYNPATH)$(CURLDIR)/$(lib) -lcurl
else
CURL_LIBCURL = -lcurl
endif
ifdef NEEDS_SSL_WITH_CURL
CURL_LIBCURL += -lssl
ifdef NEEDS_CRYPTO_WITH_SSL
CURL_LIBCURL += -lcrypto
endif
endif
ifdef NEEDS_IDN_WITH_CURL
CURL_LIBCURL += -lidn
endif
REMOTE_CURL_PRIMARY = git-remote-http$X
REMOTE_CURL_ALIASES = git-remote-https$X git-remote-ftp$X git-remote-ftps$X
REMOTE_CURL_NAMES = $(REMOTE_CURL_PRIMARY) $(REMOTE_CURL_ALIASES)
PROGRAM_OBJS += http-fetch.o
PROGRAMS += $(REMOTE_CURL_NAMES)
curl_check := $(shell (echo 070908; curl-config --vernum) 2>/dev/null | sort -r | sed -ne 2p)
ifeq "$(curl_check)" "070908"
ifndef NO_EXPAT
PROGRAM_OBJS += http-push.o
endif
endif
ifndef NO_EXPAT
ifdef EXPATDIR
BASIC_CFLAGS += -I$(EXPATDIR)/include
EXPAT_LIBEXPAT = -L$(EXPATDIR)/$(lib) $(CC_LD_DYNPATH)$(EXPATDIR)/$(lib) -lexpat
else
EXPAT_LIBEXPAT = -lexpat
endif
ifdef EXPAT_NEEDS_XMLPARSE_H
BASIC_CFLAGS += -DEXPAT_NEEDS_XMLPARSE_H
endif
endif
endif
ifdef ZLIB_PATH
BASIC_CFLAGS += -I$(ZLIB_PATH)/include
EXTLIBS += -L$(ZLIB_PATH)/$(lib) $(CC_LD_DYNPATH)$(ZLIB_PATH)/$(lib)
endif
EXTLIBS += -lz
ifndef NO_OPENSSL
OPENSSL_LIBSSL = -lssl
ifdef OPENSSLDIR
BASIC_CFLAGS += -I$(OPENSSLDIR)/include
OPENSSL_LINK = -L$(OPENSSLDIR)/$(lib) $(CC_LD_DYNPATH)$(OPENSSLDIR)/$(lib)
else
OPENSSL_LINK =
endif
ifdef NEEDS_CRYPTO_WITH_SSL
OPENSSL_LIBSSL += -lcrypto
endif
else
BASIC_CFLAGS += -DNO_OPENSSL
BLK_SHA1 = 1
OPENSSL_LIBSSL =
endif
ifdef NO_OPENSSL
LIB_4_CRYPTO =
else
ifdef NEEDS_SSL_WITH_CRYPTO
LIB_4_CRYPTO = $(OPENSSL_LINK) -lcrypto -lssl
else
LIB_4_CRYPTO = $(OPENSSL_LINK) -lcrypto
endif
ifdef APPLE_COMMON_CRYPTO
LIB_4_CRYPTO += -framework Security -framework CoreFoundation
endif
endif
ifdef NEEDS_LIBICONV
ifdef ICONVDIR
BASIC_CFLAGS += -I$(ICONVDIR)/include
ICONV_LINK = -L$(ICONVDIR)/$(lib) $(CC_LD_DYNPATH)$(ICONVDIR)/$(lib)
else
ICONV_LINK =
endif
ifdef NEEDS_LIBINTL_BEFORE_LIBICONV
ICONV_LINK += -lintl
endif
EXTLIBS += $(ICONV_LINK) -liconv
endif
ifdef NEEDS_LIBGEN
EXTLIBS += -lgen
endif
ifndef NO_GETTEXT
ifndef LIBC_CONTAINS_LIBINTL
EXTLIBS += -lintl
endif
endif
ifdef NEEDS_SOCKET
EXTLIBS += -lsocket
endif
ifdef NEEDS_NSL
EXTLIBS += -lnsl
endif
ifdef NEEDS_RESOLV
EXTLIBS += -lresolv
endif
ifdef NO_D_TYPE_IN_DIRENT
BASIC_CFLAGS += -DNO_D_TYPE_IN_DIRENT
endif
ifdef NO_D_INO_IN_DIRENT
BASIC_CFLAGS += -DNO_D_INO_IN_DIRENT
endif
ifdef NO_GECOS_IN_PWENT
BASIC_CFLAGS += -DNO_GECOS_IN_PWENT
endif
ifdef NO_ST_BLOCKS_IN_STRUCT_STAT
BASIC_CFLAGS += -DNO_ST_BLOCKS_IN_STRUCT_STAT
endif
ifdef USE_NSEC
BASIC_CFLAGS += -DUSE_NSEC
endif
ifdef USE_ST_TIMESPEC
BASIC_CFLAGS += -DUSE_ST_TIMESPEC
endif
ifdef NO_NORETURN
BASIC_CFLAGS += -DNO_NORETURN
endif
ifdef NO_NSEC
BASIC_CFLAGS += -DNO_NSEC
endif
ifdef SNPRINTF_RETURNS_BOGUS
COMPAT_CFLAGS += -DSNPRINTF_RETURNS_BOGUS
COMPAT_OBJS += compat/snprintf.o
endif
ifdef FREAD_READS_DIRECTORIES
COMPAT_CFLAGS += -DFREAD_READS_DIRECTORIES
COMPAT_OBJS += compat/fopen.o
endif
ifdef NO_SYMLINK_HEAD
BASIC_CFLAGS += -DNO_SYMLINK_HEAD
endif
ifdef GETTEXT_POISON
BASIC_CFLAGS += -DGETTEXT_POISON
endif
ifdef NO_GETTEXT
BASIC_CFLAGS += -DNO_GETTEXT
USE_GETTEXT_SCHEME ?= fallthrough
endif
ifdef NO_POLL
NO_SYS_POLL_H = YesPlease
COMPAT_CFLAGS += -DNO_POLL -Icompat/poll
COMPAT_OBJS += compat/poll/poll.o
endif
ifdef NO_STRCASESTR
COMPAT_CFLAGS += -DNO_STRCASESTR
COMPAT_OBJS += compat/strcasestr.o
endif
ifdef NO_STRLCPY
COMPAT_CFLAGS += -DNO_STRLCPY
COMPAT_OBJS += compat/strlcpy.o
endif
ifdef NO_STRTOUMAX
COMPAT_CFLAGS += -DNO_STRTOUMAX
COMPAT_OBJS += compat/strtoumax.o compat/strtoimax.o
endif
ifdef NO_STRTOULL
COMPAT_CFLAGS += -DNO_STRTOULL
endif
ifdef NO_FNMATCH
COMPAT_CFLAGS += -Icompat/fnmatch
COMPAT_CFLAGS += -DNO_FNMATCH
COMPAT_OBJS += compat/fnmatch/fnmatch.o
else
ifdef NO_FNMATCH_CASEFOLD
COMPAT_CFLAGS += -Icompat/fnmatch
COMPAT_CFLAGS += -DNO_FNMATCH_CASEFOLD
COMPAT_OBJS += compat/fnmatch/fnmatch.o
endif
endif
ifndef NO_WILDMATCH
COMPAT_CFLAGS += -DUSE_WILDMATCH
endif
ifdef NO_SETENV
COMPAT_CFLAGS += -DNO_SETENV
COMPAT_OBJS += compat/setenv.o
endif
ifdef NO_MKDTEMP
COMPAT_CFLAGS += -DNO_MKDTEMP
COMPAT_OBJS += compat/mkdtemp.o
endif
ifdef MKDIR_WO_TRAILING_SLASH
COMPAT_CFLAGS += -DMKDIR_WO_TRAILING_SLASH
COMPAT_OBJS += compat/mkdir.o
endif
ifdef NO_MKSTEMPS
COMPAT_CFLAGS += -DNO_MKSTEMPS
endif
ifdef NO_UNSETENV
COMPAT_CFLAGS += -DNO_UNSETENV
COMPAT_OBJS += compat/unsetenv.o
endif
ifdef NO_SYS_SELECT_H
BASIC_CFLAGS += -DNO_SYS_SELECT_H
endif
ifdef NO_SYS_POLL_H
BASIC_CFLAGS += -DNO_SYS_POLL_H
endif
ifdef NEEDS_SYS_PARAM_H
BASIC_CFLAGS += -DNEEDS_SYS_PARAM_H
endif
ifdef NO_INTTYPES_H
BASIC_CFLAGS += -DNO_INTTYPES_H
endif
ifdef NO_INITGROUPS
BASIC_CFLAGS += -DNO_INITGROUPS
endif
ifdef NO_MMAP
COMPAT_CFLAGS += -DNO_MMAP
COMPAT_OBJS += compat/mmap.o
else
ifdef USE_WIN32_MMAP
COMPAT_CFLAGS += -DUSE_WIN32_MMAP
COMPAT_OBJS += compat/win32mmap.o
endif
endif
ifdef OBJECT_CREATION_USES_RENAMES
COMPAT_CFLAGS += -DOBJECT_CREATION_MODE=1
endif
ifdef NO_STRUCT_ITIMERVAL
COMPAT_CFLAGS += -DNO_STRUCT_ITIMERVAL
NO_SETITIMER = YesPlease
endif
ifdef NO_SETITIMER
COMPAT_CFLAGS += -DNO_SETITIMER
endif
ifdef NO_PREAD
COMPAT_CFLAGS += -DNO_PREAD
COMPAT_OBJS += compat/pread.o
NO_THREAD_SAFE_PREAD = YesPlease
endif
ifdef NO_THREAD_SAFE_PREAD
BASIC_CFLAGS += -DNO_THREAD_SAFE_PREAD
endif
ifdef NO_FAST_WORKING_DIRECTORY
BASIC_CFLAGS += -DNO_FAST_WORKING_DIRECTORY
endif
ifdef NO_TRUSTABLE_FILEMODE
BASIC_CFLAGS += -DNO_TRUSTABLE_FILEMODE
endif
ifdef NO_IPV6
BASIC_CFLAGS += -DNO_IPV6
endif
ifdef NO_INTPTR_T
COMPAT_CFLAGS += -DNO_INTPTR_T
endif
ifdef NO_UINTMAX_T
BASIC_CFLAGS += -Duintmax_t=uint32_t
endif
ifdef NO_SOCKADDR_STORAGE
ifdef NO_IPV6
BASIC_CFLAGS += -Dsockaddr_storage=sockaddr_in
else
BASIC_CFLAGS += -Dsockaddr_storage=sockaddr_in6
endif
endif
ifdef NO_INET_NTOP
LIB_OBJS += compat/inet_ntop.o
BASIC_CFLAGS += -DNO_INET_NTOP
endif
ifdef NO_INET_PTON
LIB_OBJS += compat/inet_pton.o
BASIC_CFLAGS += -DNO_INET_PTON
endif
ifndef NO_UNIX_SOCKETS
LIB_OBJS += unix-socket.o
LIB_H += unix-socket.h
PROGRAM_OBJS += credential-cache.o
PROGRAM_OBJS += credential-cache--daemon.o
endif
ifdef NO_ICONV
BASIC_CFLAGS += -DNO_ICONV
endif
ifdef OLD_ICONV
BASIC_CFLAGS += -DOLD_ICONV
endif
ifdef NO_DEFLATE_BOUND
BASIC_CFLAGS += -DNO_DEFLATE_BOUND
endif
ifdef NO_POSIX_GOODIES
BASIC_CFLAGS += -DNO_POSIX_GOODIES
endif
ifdef BLK_SHA1
SHA1_HEADER = "block-sha1/sha1.h"
LIB_OBJS += block-sha1/sha1.o
LIB_H += block-sha1/sha1.h
else
ifdef PPC_SHA1
SHA1_HEADER = "ppc/sha1.h"
LIB_OBJS += ppc/sha1.o ppc/sha1ppc.o
LIB_H += ppc/sha1.h
else
ifdef APPLE_COMMON_CRYPTO
COMPAT_CFLAGS += -DCOMMON_DIGEST_FOR_OPENSSL
SHA1_HEADER = <CommonCrypto/CommonDigest.h>
else
SHA1_HEADER = <openssl/sha.h>
EXTLIBS += $(LIB_4_CRYPTO)
endif
endif
endif
ifdef NO_PERL_MAKEMAKER
export NO_PERL_MAKEMAKER
endif
ifdef NO_HSTRERROR
COMPAT_CFLAGS += -DNO_HSTRERROR
COMPAT_OBJS += compat/hstrerror.o
endif
ifdef NO_MEMMEM
COMPAT_CFLAGS += -DNO_MEMMEM
COMPAT_OBJS += compat/memmem.o
endif
ifdef NO_GETPAGESIZE
COMPAT_CFLAGS += -DNO_GETPAGESIZE
endif
ifdef INTERNAL_QSORT
COMPAT_CFLAGS += -DINTERNAL_QSORT
COMPAT_OBJS += compat/qsort.o
endif
ifdef RUNTIME_PREFIX
COMPAT_CFLAGS += -DRUNTIME_PREFIX
endif
ifdef NO_PTHREADS
BASIC_CFLAGS += -DNO_PTHREADS
else
BASIC_CFLAGS += $(PTHREAD_CFLAGS)
EXTLIBS += $(PTHREAD_LIBS)
LIB_OBJS += thread-utils.o
endif
ifdef HAVE_PATHS_H
BASIC_CFLAGS += -DHAVE_PATHS_H
endif
ifdef HAVE_LIBCHARSET_H
BASIC_CFLAGS += -DHAVE_LIBCHARSET_H
EXTLIBS += $(CHARSET_LIB)
endif
ifdef HAVE_STRINGS_H
BASIC_CFLAGS += -DHAVE_STRINGS_H
endif
ifdef HAVE_DEV_TTY
BASIC_CFLAGS += -DHAVE_DEV_TTY
endif
ifdef DIR_HAS_BSD_GROUP_SEMANTICS
COMPAT_CFLAGS += -DDIR_HAS_BSD_GROUP_SEMANTICS
endif
ifdef UNRELIABLE_FSTAT
BASIC_CFLAGS += -DUNRELIABLE_FSTAT
endif
ifdef NO_REGEX
COMPAT_CFLAGS += -Icompat/regex
COMPAT_OBJS += compat/regex/regex.o
endif
ifdef USE_NED_ALLOCATOR
COMPAT_CFLAGS += -Icompat/nedmalloc
COMPAT_OBJS += compat/nedmalloc/nedmalloc.o
endif
ifdef GIT_TEST_CMP_USE_COPIED_CONTEXT
export GIT_TEST_CMP_USE_COPIED_CONTEXT
endif
ifndef NO_MSGFMT_EXTENDED_OPTIONS
MSGFMT += --check --statistics
endif
ifneq (,$(XDL_FAST_HASH))
BASIC_CFLAGS += -DXDL_FAST_HASH
endif
ifeq ($(TCLTK_PATH),)
NO_TCLTK = NoThanks
endif
ifeq ($(PERL_PATH),)
NO_PERL = NoThanks
endif
ifeq ($(PYTHON_PATH),)
NO_PYTHON = NoThanks
endif
QUIET_SUBDIR0 = +$(MAKE) -C # space to separate -C and subdir
QUIET_SUBDIR1 =
ifneq ($(findstring $(MAKEFLAGS),w),w)
PRINT_DIR = --no-print-directory
else # "make -w"
NO_SUBDIR = :
endif
ifneq ($(findstring $(MAKEFLAGS),s),s)
ifndef V
QUIET_CC = @echo ' ' CC $@;
QUIET_AR = @echo ' ' AR $@;
QUIET_LINK = @echo ' ' LINK $@;
QUIET_BUILT_IN = @echo ' ' BUILTIN $@;
QUIET_GEN = @echo ' ' GEN $@;
QUIET_LNCP = @echo ' ' LN/CP $@;
QUIET_XGETTEXT = @echo ' ' XGETTEXT $@;
QUIET_MSGFMT = @echo ' ' MSGFMT $@;
QUIET_GCOV = @echo ' ' GCOV $@;
QUIET_SP = @echo ' ' SP $<;
QUIET_RC = @echo ' ' RC $@;
QUIET_SUBDIR0 = +@subdir=
QUIET_SUBDIR1 = ;$(NO_SUBDIR) echo ' ' SUBDIR $$subdir; \
$(MAKE) $(PRINT_DIR) -C $$subdir
export V
export QUIET_GEN
export QUIET_BUILT_IN
endif
endif
ifdef NO_INSTALL_HARDLINKS
export NO_INSTALL_HARDLINKS
endif
### profile feedback build
#
# Can adjust this to be a global directory if you want to do extended
# data gathering
PROFILE_DIR := $(CURDIR)
ifeq ("$(PROFILE)","GEN")
CFLAGS += -fprofile-generate=$(PROFILE_DIR) -DNO_NORETURN=1
EXTLIBS += -lgcov
export CCACHE_DISABLE = t
V = 1
else
ifneq ("$(PROFILE)","")
CFLAGS += -fprofile-use=$(PROFILE_DIR) -fprofile-correction -DNO_NORETURN=1
export CCACHE_DISABLE = t
V = 1
endif
endif
# Shell quote (do not use $(call) to accommodate ancient setups);
SHA1_HEADER_SQ = $(subst ','\'',$(SHA1_HEADER))
ETC_GITCONFIG_SQ = $(subst ','\'',$(ETC_GITCONFIG))
ETC_GITATTRIBUTES_SQ = $(subst ','\'',$(ETC_GITATTRIBUTES))
DESTDIR_SQ = $(subst ','\'',$(DESTDIR))
bindir_SQ = $(subst ','\'',$(bindir))
bindir_relative_SQ = $(subst ','\'',$(bindir_relative))
mandir_relative_SQ = $(subst ','\'',$(mandir_relative))
infodir_relative_SQ = $(subst ','\'',$(infodir_relative))
localedir_SQ = $(subst ','\'',$(localedir))
gitexecdir_SQ = $(subst ','\'',$(gitexecdir))
template_dir_SQ = $(subst ','\'',$(template_dir))
htmldir_relative_SQ = $(subst ','\'',$(htmldir_relative))
prefix_SQ = $(subst ','\'',$(prefix))
gitwebdir_SQ = $(subst ','\'',$(gitwebdir))
SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH))
PERL_PATH_SQ = $(subst ','\'',$(PERL_PATH))
PYTHON_PATH_SQ = $(subst ','\'',$(PYTHON_PATH))
TCLTK_PATH_SQ = $(subst ','\'',$(TCLTK_PATH))
DIFF_SQ = $(subst ','\'',$(DIFF))
LIBS = $(GITLIBS) $(EXTLIBS)
BASIC_CFLAGS += -DSHA1_HEADER='$(SHA1_HEADER_SQ)' \
$(COMPAT_CFLAGS)
LIB_OBJS += $(COMPAT_OBJS)
# Quote for C
ifdef DEFAULT_EDITOR
DEFAULT_EDITOR_CQ = "$(subst ",\",$(subst \,\\,$(DEFAULT_EDITOR)))"
DEFAULT_EDITOR_CQ_SQ = $(subst ','\'',$(DEFAULT_EDITOR_CQ))
BASIC_CFLAGS += -DDEFAULT_EDITOR='$(DEFAULT_EDITOR_CQ_SQ)'
endif
ifdef DEFAULT_PAGER
DEFAULT_PAGER_CQ = "$(subst ",\",$(subst \,\\,$(DEFAULT_PAGER)))"
DEFAULT_PAGER_CQ_SQ = $(subst ','\'',$(DEFAULT_PAGER_CQ))
BASIC_CFLAGS += -DDEFAULT_PAGER='$(DEFAULT_PAGER_CQ_SQ)'
endif
ifdef SHELL_PATH
SHELL_PATH_CQ = "$(subst ",\",$(subst \,\\,$(SHELL_PATH)))"
SHELL_PATH_CQ_SQ = $(subst ','\'',$(SHELL_PATH_CQ))
BASIC_CFLAGS += -DSHELL_PATH='$(SHELL_PATH_CQ_SQ)'
endif
GIT_USER_AGENT_SQ = $(subst ','\'',$(GIT_USER_AGENT))
GIT_USER_AGENT_CQ = "$(subst ",\",$(subst \,\\,$(GIT_USER_AGENT)))"
GIT_USER_AGENT_CQ_SQ = $(subst ','\'',$(GIT_USER_AGENT_CQ))
GIT-USER-AGENT: FORCE
@if test x'$(GIT_USER_AGENT_SQ)' != x"`cat GIT-USER-AGENT 2>/dev/null`"; then \
echo '$(GIT_USER_AGENT_SQ)' >GIT-USER-AGENT; \
fi
ifdef DEFAULT_HELP_FORMAT
BASIC_CFLAGS += -DDEFAULT_HELP_FORMAT='"$(DEFAULT_HELP_FORMAT)"'
endif
ALL_CFLAGS += $(BASIC_CFLAGS)
ALL_LDFLAGS += $(BASIC_LDFLAGS)
export DIFF TAR INSTALL DESTDIR SHELL_PATH
### Build rules
SHELL = $(SHELL_PATH)
all:: shell_compatibility_test
ifeq "$(PROFILE)" "BUILD"
ifeq ($(filter all,$(MAKECMDGOALS)),all)
all:: profile-clean
$(MAKE) PROFILE=GEN all
$(MAKE) PROFILE=GEN -j1 test
endif
endif
all:: $(ALL_PROGRAMS) $(SCRIPT_LIB) $(BUILT_INS) $(OTHER_PROGRAMS) GIT-BUILD-OPTIONS
ifneq (,$X)
$(QUIET_BUILT_IN)$(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) git$X)), test -d '$p' -o '$p' -ef '$p$X' || $(RM) '$p';)
endif
all::
ifndef NO_TCLTK
$(QUIET_SUBDIR0)git-gui $(QUIET_SUBDIR1) gitexecdir='$(gitexec_instdir_SQ)' all
$(QUIET_SUBDIR0)gitk-git $(QUIET_SUBDIR1) all
endif
ifndef NO_PERL
$(QUIET_SUBDIR0)perl $(QUIET_SUBDIR1) PERL_PATH='$(PERL_PATH_SQ)' prefix='$(prefix_SQ)' localedir='$(localedir_SQ)' all
endif
$(QUIET_SUBDIR0)templates $(QUIET_SUBDIR1) SHELL_PATH='$(SHELL_PATH_SQ)' PERL_PATH='$(PERL_PATH_SQ)'
please_set_SHELL_PATH_to_a_more_modern_shell:
@$$(:)
shell_compatibility_test: please_set_SHELL_PATH_to_a_more_modern_shell
strip: $(PROGRAMS) git$X
$(STRIP) $(STRIP_OPTS) $^
### Target-specific flags and dependencies
# The generic compilation pattern rule and automatically
# computed header dependencies (falling back to a dependency on
# LIB_H) are enough to describe how most targets should be built,
# but some targets are special enough to need something a little
# different.
#
# - When a source file "foo.c" #includes a generated header file,
# we need to list that dependency for the "foo.o" target.
#
# We also list it from other targets that are built from foo.c
# like "foo.sp" and "foo.s", even though that is easy to forget
# to do because the generated header is already present around
# after a regular build attempt.
#
# - Some code depends on configuration kept in makefile
# variables. The target-specific variable EXTRA_CPPFLAGS can
# be used to convey that information to the C preprocessor
# using -D options.
#
# The "foo.o" target should have a corresponding dependency on
# a file that changes when the value of the makefile variable
# changes. For example, targets making use of the
# $(GIT_VERSION) variable depend on GIT-VERSION-FILE.
#
# Technically the ".sp" and ".s" targets do not need this
# dependency because they are force-built, but they get the
# same dependency for consistency. This way, you do not have to
# know how each target is implemented. And it means the
# dependencies here will not need to change if the force-build
# details change some day.
git.sp git.s git.o: GIT-PREFIX
git.sp git.s git.o: EXTRA_CPPFLAGS = \
'-DGIT_HTML_PATH="$(htmldir_relative_SQ)"' \
'-DGIT_MAN_PATH="$(mandir_relative_SQ)"' \
'-DGIT_INFO_PATH="$(infodir_relative_SQ)"'
git$X: git.o GIT-LDFLAGS $(BUILTIN_OBJS) $(GITLIBS)
$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ git.o \
$(BUILTIN_OBJS) $(ALL_LDFLAGS) $(LIBS)
help.sp help.s help.o: common-cmds.h
builtin/help.sp builtin/help.s builtin/help.o: common-cmds.h GIT-PREFIX
builtin/help.sp builtin/help.s builtin/help.o: EXTRA_CPPFLAGS = \
'-DGIT_HTML_PATH="$(htmldir_relative_SQ)"' \
'-DGIT_MAN_PATH="$(mandir_relative_SQ)"' \
'-DGIT_INFO_PATH="$(infodir_relative_SQ)"'
version.sp version.s version.o: GIT-VERSION-FILE GIT-USER-AGENT
version.sp version.s version.o: EXTRA_CPPFLAGS = \
'-DGIT_VERSION="$(GIT_VERSION)"' \
'-DGIT_USER_AGENT=$(GIT_USER_AGENT_CQ_SQ)'
$(BUILT_INS): git$X
$(QUIET_BUILT_IN)$(RM) $@ && \
ln $< $@ 2>/dev/null || \
ln -s $< $@ 2>/dev/null || \
cp $< $@
common-cmds.h: ./generate-cmdlist.sh command-list.txt
common-cmds.h: $(wildcard Documentation/git-*.txt)
$(QUIET_GEN)./generate-cmdlist.sh > $@+ && mv $@+ $@
SCRIPT_DEFINES = $(SHELL_PATH_SQ):$(DIFF_SQ):$(GIT_VERSION):\
$(localedir_SQ):$(NO_CURL):$(USE_GETTEXT_SCHEME):$(SANE_TOOL_PATH_SQ):\
$(gitwebdir_SQ):$(PERL_PATH_SQ)
define cmd_munge_script
$(RM) $@ $@+ && \
sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \
-e 's|@SHELL_PATH@|$(SHELL_PATH_SQ)|' \
-e 's|@@DIFF@@|$(DIFF_SQ)|' \
-e 's|@@LOCALEDIR@@|$(localedir_SQ)|g' \
-e 's/@@NO_CURL@@/$(NO_CURL)/g' \
-e 's/@@USE_GETTEXT_SCHEME@@/$(USE_GETTEXT_SCHEME)/g' \
-e $(BROKEN_PATH_FIX) \
-e 's|@@GITWEBDIR@@|$(gitwebdir_SQ)|g' \
-e 's|@@PERL@@|$(PERL_PATH_SQ)|g' \
$@.sh >$@+
endef
GIT-SCRIPT-DEFINES: FORCE
@FLAGS='$(SCRIPT_DEFINES)'; \
if test x"$$FLAGS" != x"`cat $@ 2>/dev/null`" ; then \
echo >&2 " * new script parameters"; \
echo "$$FLAGS" >$@; \
fi
$(patsubst %.sh,%,$(SCRIPT_SH)) : % : %.sh GIT-SCRIPT-DEFINES
$(QUIET_GEN)$(cmd_munge_script) && \
chmod +x $@+ && \
mv $@+ $@
$(SCRIPT_LIB) : % : %.sh GIT-SCRIPT-DEFINES
$(QUIET_GEN)$(cmd_munge_script) && \
mv $@+ $@
git.res: git.rc GIT-VERSION-FILE
$(QUIET_RC)$(RC) \
$(join -DMAJOR= -DMINOR= -DPATCH=, $(wordlist 1,3,$(subst -, ,$(subst ., ,$(GIT_VERSION))))) \
-DGIT_VERSION="\\\"$(GIT_VERSION)\\\"" $< -o $@
ifndef NO_PERL
$(patsubst %.perl,%,$(SCRIPT_PERL)): perl/perl.mak
perl/perl.mak: perl/PM.stamp
perl/PM.stamp: FORCE
$(QUIET_GEN)$(FIND) perl -type f -name '*.pm' | sort >$@+ && \
{ cmp $@+ $@ >/dev/null 2>/dev/null || mv $@+ $@; } && \
$(RM) $@+
perl/perl.mak: GIT-CFLAGS GIT-PREFIX perl/Makefile perl/Makefile.PL
$(QUIET_SUBDIR0)perl $(QUIET_SUBDIR1) PERL_PATH='$(PERL_PATH_SQ)' prefix='$(prefix_SQ)' $(@F)
$(patsubst %.perl,%,$(SCRIPT_PERL)): % : %.perl GIT-VERSION-FILE
$(QUIET_GEN)$(RM) $@ $@+ && \
INSTLIBDIR=`MAKEFLAGS= $(MAKE) -C perl -s --no-print-directory instlibdir` && \
sed -e '1{' \
-e ' s|#!.*perl|#!$(PERL_PATH_SQ)|' \
-e ' h' \
-e ' s=.*=use lib (split(/$(pathsep)/, $$ENV{GITPERLLIB} || "'"$$INSTLIBDIR"'"));=' \
-e ' H' \
-e ' x' \
-e '}' \
-e 's/@@GIT_VERSION@@/$(GIT_VERSION)/g' \
$< >$@+ && \
chmod +x $@+ && \
mv $@+ $@
.PHONY: gitweb
gitweb:
$(QUIET_SUBDIR0)gitweb $(QUIET_SUBDIR1) all
git-instaweb: git-instaweb.sh gitweb GIT-SCRIPT-DEFINES
$(QUIET_GEN)$(cmd_munge_script) && \
chmod +x $@+ && \
mv $@+ $@
else # NO_PERL
$(patsubst %.perl,%,$(SCRIPT_PERL)) git-instaweb: % : unimplemented.sh
$(QUIET_GEN)$(RM) $@ $@+ && \
sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \
-e 's|@@REASON@@|NO_PERL=$(NO_PERL)|g' \
unimplemented.sh >$@+ && \
chmod +x $@+ && \
mv $@+ $@
endif # NO_PERL
ifndef NO_PYTHON
$(SCRIPT_PYTHON_GEN): GIT-CFLAGS GIT-PREFIX GIT-PYTHON-VARS
$(SCRIPT_PYTHON_GEN): % : %.py
$(QUIET_GEN)$(RM) $@ $@+ && \
sed -e '1s|#!.*python|#!$(PYTHON_PATH_SQ)|' \
$< >$@+ && \
chmod +x $@+ && \
mv $@+ $@
else # NO_PYTHON
$(SCRIPT_PYTHON_GEN): % : unimplemented.sh
$(QUIET_GEN)$(RM) $@ $@+ && \
sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \
-e 's|@@REASON@@|NO_PYTHON=$(NO_PYTHON)|g' \
unimplemented.sh >$@+ && \
chmod +x $@+ && \
mv $@+ $@
endif # NO_PYTHON
CONFIGURE_RECIPE = $(RM) configure configure.ac+ && \
sed -e 's/@@GIT_VERSION@@/$(GIT_VERSION)/g' \
configure.ac >configure.ac+ && \
autoconf -o configure configure.ac+ && \
$(RM) configure.ac+
configure: configure.ac GIT-VERSION-FILE
$(QUIET_GEN)$(CONFIGURE_RECIPE)
ifdef AUTOCONFIGURED
# We avoid depending on 'configure' here, because it gets rebuilt
# every time GIT-VERSION-FILE is modified, only to update the embedded
# version number string, which config.status does not care about. We
# do want to recheck when the platform/environment detection logic
# changes, hence this depends on configure.ac.
config.status: configure.ac
$(QUIET_GEN)$(CONFIGURE_RECIPE) && \
if test -f config.status; then \
./config.status --recheck; \
else \
./configure; \
fi
reconfigure config.mak.autogen: config.status
$(QUIET_GEN)./config.status
.PHONY: reconfigure # This is a convenience target.
endif
XDIFF_OBJS += xdiff/xdiffi.o
XDIFF_OBJS += xdiff/xprepare.o
XDIFF_OBJS += xdiff/xutils.o
XDIFF_OBJS += xdiff/xemit.o
XDIFF_OBJS += xdiff/xmerge.o
XDIFF_OBJS += xdiff/xpatience.o
XDIFF_OBJS += xdiff/xhistogram.o
VCSSVN_OBJS += vcs-svn/line_buffer.o
VCSSVN_OBJS += vcs-svn/sliding_window.o
VCSSVN_OBJS += vcs-svn/repo_tree.o
VCSSVN_OBJS += vcs-svn/fast_export.o
VCSSVN_OBJS += vcs-svn/svndiff.o
VCSSVN_OBJS += vcs-svn/svndump.o
TEST_OBJS := $(patsubst test-%$X,test-%.o,$(TEST_PROGRAMS))
OBJECTS := $(LIB_OBJS) $(BUILTIN_OBJS) $(PROGRAM_OBJS) $(TEST_OBJS) \
$(XDIFF_OBJS) \
$(VCSSVN_OBJS) \
git.o
ifndef NO_CURL
OBJECTS += http.o http-walker.o remote-curl.o
endif
dep_files := $(foreach f,$(OBJECTS),$(dir $f).depend/$(notdir $f).d)
dep_dirs := $(addsuffix .depend,$(sort $(dir $(OBJECTS))))
ifeq ($(COMPUTE_HEADER_DEPENDENCIES),yes)
$(dep_dirs):
@mkdir -p $@
missing_dep_dirs := $(filter-out $(wildcard $(dep_dirs)),$(dep_dirs))
dep_file = $(dir $@).depend/$(notdir $@).d
dep_args = -MF $(dep_file) -MQ $@ -MMD -MP
ifdef CHECK_HEADER_DEPENDENCIES
$(error cannot compute header dependencies outside a normal build. \
Please unset CHECK_HEADER_DEPENDENCIES and try again)
endif
endif
ifneq ($(COMPUTE_HEADER_DEPENDENCIES),yes)
ifndef CHECK_HEADER_DEPENDENCIES
dep_dirs =
missing_dep_dirs =
dep_args =
endif
endif
ifdef CHECK_HEADER_DEPENDENCIES
ifndef PRINT_HEADER_DEPENDENCIES
missing_deps = $(filter-out $(notdir $^), \
$(notdir $(shell $(MAKE) -s $@ \
CHECK_HEADER_DEPENDENCIES=YesPlease \
USE_COMPUTED_HEADER_DEPENDENCIES=YesPlease \
PRINT_HEADER_DEPENDENCIES=YesPlease)))
endif
endif
ASM_SRC := $(wildcard $(OBJECTS:o=S))
ASM_OBJ := $(ASM_SRC:S=o)
C_OBJ := $(filter-out $(ASM_OBJ),$(OBJECTS))
.SUFFIXES:
ifdef PRINT_HEADER_DEPENDENCIES
$(C_OBJ): %.o: %.c FORCE
echo $^
$(ASM_OBJ): %.o: %.S FORCE
echo $^
ifndef CHECK_HEADER_DEPENDENCIES
$(error cannot print header dependencies during a normal build. \
Please set CHECK_HEADER_DEPENDENCIES and try again)
endif
endif
ifndef PRINT_HEADER_DEPENDENCIES
ifdef CHECK_HEADER_DEPENDENCIES
$(C_OBJ): %.o: %.c $(dep_files) FORCE
@set -e; echo CHECK $@; \
missing_deps="$(missing_deps)"; \
if test "$$missing_deps"; \
then \
echo missing dependencies: $$missing_deps; \
false; \
fi
$(ASM_OBJ): %.o: %.S $(dep_files) FORCE
@set -e; echo CHECK $@; \
missing_deps="$(missing_deps)"; \
if test "$$missing_deps"; \
then \
echo missing dependencies: $$missing_deps; \
false; \
fi
endif
endif
ifndef CHECK_HEADER_DEPENDENCIES
$(C_OBJ): %.o: %.c GIT-CFLAGS $(missing_dep_dirs)
$(QUIET_CC)$(CC) -o $*.o -c $(dep_args) $(ALL_CFLAGS) $(EXTRA_CPPFLAGS) $<
$(ASM_OBJ): %.o: %.S GIT-CFLAGS $(missing_dep_dirs)
$(QUIET_CC)$(CC) -o $*.o -c $(dep_args) $(ALL_CFLAGS) $(EXTRA_CPPFLAGS) $<
endif
%.s: %.c GIT-CFLAGS FORCE
$(QUIET_CC)$(CC) -o $@ -S $(ALL_CFLAGS) $(EXTRA_CPPFLAGS) $<
ifdef USE_COMPUTED_HEADER_DEPENDENCIES
# Take advantage of gcc's on-the-fly dependency generation
# See <http://gcc.gnu.org/gcc-3.0/features.html>.
dep_files_present := $(wildcard $(dep_files))
ifneq ($(dep_files_present),)
include $(dep_files_present)
endif
else
# Dependencies on header files, for platforms that do not support
# the gcc -MMD option.
#
# Dependencies on automatically generated headers such as common-cmds.h
# should _not_ be included here, since they are necessary even when
# building an object for the first time.
$(OBJECTS): $(LIB_H)
endif
exec_cmd.sp exec_cmd.s exec_cmd.o: GIT-PREFIX
exec_cmd.sp exec_cmd.s exec_cmd.o: EXTRA_CPPFLAGS = \
'-DGIT_EXEC_PATH="$(gitexecdir_SQ)"' \
'-DBINDIR="$(bindir_relative_SQ)"' \
'-DPREFIX="$(prefix_SQ)"'
builtin/init-db.sp builtin/init-db.s builtin/init-db.o: GIT-PREFIX
builtin/init-db.sp builtin/init-db.s builtin/init-db.o: EXTRA_CPPFLAGS = \
-DDEFAULT_GIT_TEMPLATE_DIR='"$(template_dir_SQ)"'
config.sp config.s config.o: GIT-PREFIX
config.sp config.s config.o: EXTRA_CPPFLAGS = \
-DETC_GITCONFIG='"$(ETC_GITCONFIG_SQ)"'
attr.sp attr.s attr.o: GIT-PREFIX
attr.sp attr.s attr.o: EXTRA_CPPFLAGS = \
-DETC_GITATTRIBUTES='"$(ETC_GITATTRIBUTES_SQ)"'
gettext.sp gettext.s gettext.o: GIT-PREFIX
gettext.sp gettext.s gettext.o: EXTRA_CPPFLAGS = \
-DGIT_LOCALE_PATH='"$(localedir_SQ)"'
http-push.sp http.sp http-walker.sp remote-curl.sp: SPARSE_FLAGS += \
-DCURL_DISABLE_TYPECHECK
ifdef NO_EXPAT
http-walker.sp http-walker.s http-walker.o: EXTRA_CPPFLAGS = -DNO_EXPAT
endif
ifdef NO_REGEX
compat/regex/regex.sp compat/regex/regex.o: EXTRA_CPPFLAGS = \
-DGAWK -DNO_MBSUPPORT
endif
ifdef USE_NED_ALLOCATOR
compat/nedmalloc/nedmalloc.sp compat/nedmalloc/nedmalloc.o: EXTRA_CPPFLAGS = \
-DNDEBUG -DOVERRIDE_STRDUP -DREPLACE_SYSTEM_ALLOCATOR
compat/nedmalloc/nedmalloc.sp: SPARSE_FLAGS += -Wno-non-pointer-null
endif
git-%$X: %.o GIT-LDFLAGS $(GITLIBS)
$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS)
git-imap-send$X: imap-send.o GIT-LDFLAGS $(GITLIBS)
$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) \
$(LIBS) $(OPENSSL_LINK) $(OPENSSL_LIBSSL) $(LIB_4_CRYPTO)
git-http-fetch$X: revision.o http.o http-walker.o http-fetch.o GIT-LDFLAGS $(GITLIBS)
$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) \
$(LIBS) $(CURL_LIBCURL)
git-http-push$X: revision.o http.o http-push.o GIT-LDFLAGS $(GITLIBS)
$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) \
$(LIBS) $(CURL_LIBCURL) $(EXPAT_LIBEXPAT)
git-remote-testsvn$X: remote-testsvn.o GIT-LDFLAGS $(GITLIBS) $(VCSSVN_LIB)
$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS) \
$(VCSSVN_LIB)
$(REMOTE_CURL_ALIASES): $(REMOTE_CURL_PRIMARY)
$(QUIET_LNCP)$(RM) $@ && \
ln $< $@ 2>/dev/null || \
ln -s $< $@ 2>/dev/null || \
cp $< $@
$(REMOTE_CURL_PRIMARY): remote-curl.o http.o http-walker.o GIT-LDFLAGS $(GITLIBS)
$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) \
$(LIBS) $(CURL_LIBCURL) $(EXPAT_LIBEXPAT)
$(LIB_FILE): $(LIB_OBJS)
$(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $^
$(XDIFF_LIB): $(XDIFF_OBJS)
$(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $^
$(VCSSVN_LIB): $(VCSSVN_OBJS)
$(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $^
export DEFAULT_EDITOR DEFAULT_PAGER
doc:
$(MAKE) -C Documentation all
man:
$(MAKE) -C Documentation man
html:
$(MAKE) -C Documentation html
info:
$(MAKE) -C Documentation info
pdf:
$(MAKE) -C Documentation pdf
XGETTEXT_FLAGS = \
--force-po \
--add-comments \
--msgid-bugs-address="Git Mailing List <git@vger.kernel.org>" \
--from-code=UTF-8
XGETTEXT_FLAGS_C = $(XGETTEXT_FLAGS) --language=C \
--keyword=_ --keyword=N_ --keyword="Q_:1,2"
XGETTEXT_FLAGS_SH = $(XGETTEXT_FLAGS) --language=Shell \
--keyword=gettextln --keyword=eval_gettextln
XGETTEXT_FLAGS_PERL = $(XGETTEXT_FLAGS) --keyword=__ --language=Perl
LOCALIZED_C := $(C_OBJ:o=c) $(LIB_H) $(GENERATED_H)
LOCALIZED_SH := $(SCRIPT_SH)
LOCALIZED_PERL := $(SCRIPT_PERL)
ifdef XGETTEXT_INCLUDE_TESTS
LOCALIZED_C += t/t0200/test.c
LOCALIZED_SH += t/t0200/test.sh
LOCALIZED_PERL += t/t0200/test.perl
endif
po/git.pot: $(LOCALIZED_C)
$(QUIET_XGETTEXT)$(XGETTEXT) -o$@+ $(XGETTEXT_FLAGS_C) $(LOCALIZED_C)
$(QUIET_XGETTEXT)$(XGETTEXT) -o$@+ --join-existing $(XGETTEXT_FLAGS_SH) \
$(LOCALIZED_SH)
$(QUIET_XGETTEXT)$(XGETTEXT) -o$@+ --join-existing $(XGETTEXT_FLAGS_PERL) \
$(LOCALIZED_PERL)
mv $@+ $@
pot: po/git.pot
POFILES := $(wildcard po/*.po)
MOFILES := $(patsubst po/%.po,po/build/locale/%/LC_MESSAGES/git.mo,$(POFILES))
ifndef NO_GETTEXT
all:: $(MOFILES)
endif
po/build/locale/%/LC_MESSAGES/git.mo: po/%.po
$(QUIET_MSGFMT)mkdir -p $(dir $@) && $(MSGFMT) -o $@ $<
FIND_SOURCE_FILES = ( git ls-files '*.[hcS]' 2>/dev/null || \
$(FIND) . \( -name .git -type d -prune \) \
-o \( -name '*.[hcS]' -type f -print \) )
$(ETAGS_TARGET): FORCE
$(RM) $(ETAGS_TARGET)
$(FIND_SOURCE_FILES) | xargs etags -a -o $(ETAGS_TARGET)
tags: FORCE
$(RM) tags
$(FIND_SOURCE_FILES) | xargs ctags -a
cscope:
$(RM) cscope*
$(FIND_SOURCE_FILES) | xargs cscope -b
### Detect prefix changes
TRACK_PREFIX = $(bindir_SQ):$(gitexecdir_SQ):$(template_dir_SQ):$(prefix_SQ):\
$(localedir_SQ)
GIT-PREFIX: FORCE
@FLAGS='$(TRACK_PREFIX)'; \
if test x"$$FLAGS" != x"`cat GIT-PREFIX 2>/dev/null`" ; then \
echo >&2 " * new prefix flags"; \
echo "$$FLAGS" >GIT-PREFIX; \
fi
TRACK_CFLAGS = $(CC):$(subst ','\'',$(ALL_CFLAGS)):$(USE_GETTEXT_SCHEME)
GIT-CFLAGS: FORCE
@FLAGS='$(TRACK_CFLAGS)'; \
if test x"$$FLAGS" != x"`cat GIT-CFLAGS 2>/dev/null`" ; then \
echo >&2 " * new build flags"; \
echo "$$FLAGS" >GIT-CFLAGS; \
fi
TRACK_LDFLAGS = $(subst ','\'',$(ALL_LDFLAGS))
GIT-LDFLAGS: FORCE
@FLAGS='$(TRACK_LDFLAGS)'; \
if test x"$$FLAGS" != x"`cat GIT-LDFLAGS 2>/dev/null`" ; then \
echo >&2 " * new link flags"; \
echo "$$FLAGS" >GIT-LDFLAGS; \
fi
# We need to apply sq twice, once to protect from the shell
# that runs GIT-BUILD-OPTIONS, and then again to protect it
# and the first level quoting from the shell that runs "echo".
GIT-BUILD-OPTIONS: FORCE
@echo SHELL_PATH=\''$(subst ','\'',$(SHELL_PATH_SQ))'\' >$@
@echo PERL_PATH=\''$(subst ','\'',$(PERL_PATH_SQ))'\' >>$@
@echo DIFF=\''$(subst ','\'',$(subst ','\'',$(DIFF)))'\' >>$@
@echo PYTHON_PATH=\''$(subst ','\'',$(PYTHON_PATH_SQ))'\' >>$@
@echo TAR=\''$(subst ','\'',$(subst ','\'',$(TAR)))'\' >>$@
@echo NO_CURL=\''$(subst ','\'',$(subst ','\'',$(NO_CURL)))'\' >>$@
@echo USE_LIBPCRE=\''$(subst ','\'',$(subst ','\'',$(USE_LIBPCRE)))'\' >>$@
@echo NO_PERL=\''$(subst ','\'',$(subst ','\'',$(NO_PERL)))'\' >>$@
@echo NO_PYTHON=\''$(subst ','\'',$(subst ','\'',$(NO_PYTHON)))'\' >>$@
@echo NO_UNIX_SOCKETS=\''$(subst ','\'',$(subst ','\'',$(NO_UNIX_SOCKETS)))'\' >>$@
ifdef TEST_OUTPUT_DIRECTORY
@echo TEST_OUTPUT_DIRECTORY=\''$(subst ','\'',$(subst ','\'',$(TEST_OUTPUT_DIRECTORY)))'\' >>$@
endif
ifdef GIT_TEST_OPTS
@echo GIT_TEST_OPTS=\''$(subst ','\'',$(subst ','\'',$(GIT_TEST_OPTS)))'\' >>$@
endif
ifdef GIT_TEST_CMP
@echo GIT_TEST_CMP=\''$(subst ','\'',$(subst ','\'',$(GIT_TEST_CMP)))'\' >>$@
endif
ifdef GIT_TEST_CMP_USE_COPIED_CONTEXT
@echo GIT_TEST_CMP_USE_COPIED_CONTEXT=YesPlease >>$@
endif
@echo NO_GETTEXT=\''$(subst ','\'',$(subst ','\'',$(NO_GETTEXT)))'\' >>$@
@echo GETTEXT_POISON=\''$(subst ','\'',$(subst ','\'',$(GETTEXT_POISON)))'\' >>$@
ifdef GIT_PERF_REPEAT_COUNT
@echo GIT_PERF_REPEAT_COUNT=\''$(subst ','\'',$(subst ','\'',$(GIT_PERF_REPEAT_COUNT)))'\' >>$@
endif
ifdef GIT_PERF_REPO
@echo GIT_PERF_REPO=\''$(subst ','\'',$(subst ','\'',$(GIT_PERF_REPO)))'\' >>$@
endif
ifdef GIT_PERF_LARGE_REPO
@echo GIT_PERF_LARGE_REPO=\''$(subst ','\'',$(subst ','\'',$(GIT_PERF_LARGE_REPO)))'\' >>$@
endif
ifdef GIT_PERF_MAKE_OPTS
@echo GIT_PERF_MAKE_OPTS=\''$(subst ','\'',$(subst ','\'',$(GIT_PERF_MAKE_OPTS)))'\' >>$@
endif
### Detect Python interpreter path changes
ifndef NO_PYTHON
TRACK_PYTHON = $(subst ','\'',-DPYTHON_PATH='$(PYTHON_PATH_SQ)')
GIT-PYTHON-VARS: FORCE
@VARS='$(TRACK_PYTHON)'; \
if test x"$$VARS" != x"`cat $@ 2>/dev/null`" ; then \
echo >&2 " * new Python interpreter location"; \
echo "$$VARS" >$@; \
fi
endif
test_bindir_programs := $(patsubst %,bin-wrappers/%,$(BINDIR_PROGRAMS_NEED_X) $(BINDIR_PROGRAMS_NO_X) $(TEST_PROGRAMS_NEED_X))
all:: $(TEST_PROGRAMS) $(test_bindir_programs)
all:: $(NO_INSTALL)
bin-wrappers/%: wrap-for-bin.sh
@mkdir -p bin-wrappers
$(QUIET_GEN)sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \
-e 's|@@BUILD_DIR@@|$(shell pwd)|' \
-e 's|@@PROG@@|$(@F)|' < $< > $@ && \
chmod +x $@
# GNU make supports exporting all variables by "export" without parameters.
# However, the environment gets quite big, and some programs have problems
# with that.
export NO_SVN_TESTS
export TEST_NO_MALLOC_CHECK
### Testing rules
test: all
$(MAKE) -C t/ all
perf: all
$(MAKE) -C t/perf/ all
.PHONY: test perf
test-ctype$X: ctype.o
test-date$X: date.o ctype.o
test-delta$X: diff-delta.o patch-delta.o
test-line-buffer$X: vcs-svn/lib.a
test-parse-options$X: parse-options.o parse-options-cb.o
test-svn-fe$X: vcs-svn/lib.a
.PRECIOUS: $(TEST_OBJS)
test-%$X: test-%.o GIT-LDFLAGS $(GITLIBS)
$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(filter %.a,$^) $(LIBS)
check-sha1:: test-sha1$X
./test-sha1.sh
SP_OBJ = $(patsubst %.o,%.sp,$(C_OBJ))
$(SP_OBJ): %.sp: %.c GIT-CFLAGS FORCE
$(QUIET_SP)cgcc -no-compile $(ALL_CFLAGS) $(EXTRA_CPPFLAGS) \
$(SPARSE_FLAGS) $<
.PHONY: sparse $(SP_OBJ)
sparse: $(SP_OBJ)
check: common-cmds.h
@if sparse; \
then \
echo 2>&1 "Use 'make sparse' instead"; \
$(MAKE) --no-print-directory sparse; \
else \
echo 2>&1 "Did you mean 'make test'?"; \
exit 1; \
fi
### Installation rules
ifneq ($(filter /%,$(firstword $(template_dir))),)
template_instdir = $(template_dir)
else
template_instdir = $(prefix)/$(template_dir)
endif
export template_instdir
ifneq ($(filter /%,$(firstword $(gitexecdir))),)
gitexec_instdir = $(gitexecdir)
else
gitexec_instdir = $(prefix)/$(gitexecdir)
endif
gitexec_instdir_SQ = $(subst ','\'',$(gitexec_instdir))
export gitexec_instdir
ifneq ($(filter /%,$(firstword $(mergetoolsdir))),)
mergetools_instdir = $(mergetoolsdir)
else
mergetools_instdir = $(prefix)/$(mergetoolsdir)
endif
mergetools_instdir_SQ = $(subst ','\'',$(mergetools_instdir))
install_bindir_programs := $(patsubst %,%$X,$(BINDIR_PROGRAMS_NEED_X)) $(BINDIR_PROGRAMS_NO_X)
install: all
$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(bindir_SQ)'
$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(gitexec_instdir_SQ)'
$(INSTALL) $(ALL_PROGRAMS) '$(DESTDIR_SQ)$(gitexec_instdir_SQ)'
$(INSTALL) -m 644 $(SCRIPT_LIB) '$(DESTDIR_SQ)$(gitexec_instdir_SQ)'
$(INSTALL) $(install_bindir_programs) '$(DESTDIR_SQ)$(bindir_SQ)'
$(MAKE) -C templates DESTDIR='$(DESTDIR_SQ)' install
$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(mergetools_instdir_SQ)'
$(INSTALL) -m 644 mergetools/* '$(DESTDIR_SQ)$(mergetools_instdir_SQ)'
ifndef NO_GETTEXT
$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(localedir_SQ)'
(cd po/build/locale && $(TAR) cf - .) | \
(cd '$(DESTDIR_SQ)$(localedir_SQ)' && umask 022 && $(TAR) xof -)
endif
ifndef NO_PERL
$(MAKE) -C perl prefix='$(prefix_SQ)' DESTDIR='$(DESTDIR_SQ)' install
$(MAKE) -C gitweb install
endif
ifndef NO_TCLTK
$(MAKE) -C gitk-git install
$(MAKE) -C git-gui gitexecdir='$(gitexec_instdir_SQ)' install
endif
ifneq (,$X)
$(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) git$X)), test '$(DESTDIR_SQ)$(gitexec_instdir_SQ)/$p' -ef '$(DESTDIR_SQ)$(gitexec_instdir_SQ)/$p$X' || $(RM) '$(DESTDIR_SQ)$(gitexec_instdir_SQ)/$p';)
endif
bindir=$$(cd '$(DESTDIR_SQ)$(bindir_SQ)' && pwd) && \
execdir=$$(cd '$(DESTDIR_SQ)$(gitexec_instdir_SQ)' && pwd) && \
{ test "$$bindir/" = "$$execdir/" || \
for p in git$X $(filter $(install_bindir_programs),$(ALL_PROGRAMS)); do \
$(RM) "$$execdir/$$p" && \
test -z "$(NO_INSTALL_HARDLINKS)$(NO_CROSS_DIRECTORY_HARDLINKS)" && \
ln "$$bindir/$$p" "$$execdir/$$p" 2>/dev/null || \
cp "$$bindir/$$p" "$$execdir/$$p" || exit; \
done; \
} && \
for p in $(filter $(install_bindir_programs),$(BUILT_INS)); do \
$(RM) "$$bindir/$$p" && \
test -z "$(NO_INSTALL_HARDLINKS)" && \
ln "$$bindir/git$X" "$$bindir/$$p" 2>/dev/null || \
ln -s "git$X" "$$bindir/$$p" 2>/dev/null || \
cp "$$bindir/git$X" "$$bindir/$$p" || exit; \
done && \
for p in $(BUILT_INS); do \
$(RM) "$$execdir/$$p" && \
test -z "$(NO_INSTALL_HARDLINKS)" && \
ln "$$execdir/git$X" "$$execdir/$$p" 2>/dev/null || \
ln -s "git$X" "$$execdir/$$p" 2>/dev/null || \
cp "$$execdir/git$X" "$$execdir/$$p" || exit; \
done && \
remote_curl_aliases="$(REMOTE_CURL_ALIASES)" && \
for p in $$remote_curl_aliases; do \
$(RM) "$$execdir/$$p" && \
test -z "$(NO_INSTALL_HARDLINKS)" && \
ln "$$execdir/git-remote-http$X" "$$execdir/$$p" 2>/dev/null || \
ln -s "git-remote-http$X" "$$execdir/$$p" 2>/dev/null || \
cp "$$execdir/git-remote-http$X" "$$execdir/$$p" || exit; \
done && \
./check_bindir "z$$bindir" "z$$execdir" "$$bindir/git-add$X"
install-gitweb:
$(MAKE) -C gitweb install
install-doc:
$(MAKE) -C Documentation install
install-man:
$(MAKE) -C Documentation install-man
install-html:
$(MAKE) -C Documentation install-html
install-info:
$(MAKE) -C Documentation install-info
install-pdf:
$(MAKE) -C Documentation install-pdf
quick-install-doc:
$(MAKE) -C Documentation quick-install
quick-install-man:
$(MAKE) -C Documentation quick-install-man
quick-install-html:
$(MAKE) -C Documentation quick-install-html
### Maintainer's dist rules
git.spec: git.spec.in GIT-VERSION-FILE
sed -e 's/@@VERSION@@/$(GIT_VERSION)/g' < $< > $@+
mv $@+ $@
GIT_TARNAME = git-$(GIT_VERSION)
dist: git.spec git-archive$(X) configure
./git-archive --format=tar \
--prefix=$(GIT_TARNAME)/ HEAD^{tree} > $(GIT_TARNAME).tar
@mkdir -p $(GIT_TARNAME)
@cp git.spec configure $(GIT_TARNAME)
@echo $(GIT_VERSION) > $(GIT_TARNAME)/version
@$(MAKE) -C git-gui TARDIR=../$(GIT_TARNAME)/git-gui dist-version
$(TAR) rf $(GIT_TARNAME).tar \
$(GIT_TARNAME)/git.spec \
$(GIT_TARNAME)/configure \
$(GIT_TARNAME)/version \
$(GIT_TARNAME)/git-gui/version
@$(RM) -r $(GIT_TARNAME)
gzip -f -9 $(GIT_TARNAME).tar
rpm: dist
$(RPMBUILD) \
--define "_source_filedigest_algorithm md5" \
--define "_binary_filedigest_algorithm md5" \
-ta $(GIT_TARNAME).tar.gz
htmldocs = git-htmldocs-$(GIT_VERSION)
manpages = git-manpages-$(GIT_VERSION)
dist-doc:
$(RM) -r .doc-tmp-dir
mkdir .doc-tmp-dir
$(MAKE) -C Documentation WEBDOC_DEST=../.doc-tmp-dir install-webdoc
cd .doc-tmp-dir && $(TAR) cf ../$(htmldocs).tar .
gzip -n -9 -f $(htmldocs).tar
:
$(RM) -r .doc-tmp-dir
mkdir -p .doc-tmp-dir/man1 .doc-tmp-dir/man5 .doc-tmp-dir/man7
$(MAKE) -C Documentation DESTDIR=./ \
man1dir=../.doc-tmp-dir/man1 \
man5dir=../.doc-tmp-dir/man5 \
man7dir=../.doc-tmp-dir/man7 \
install
cd .doc-tmp-dir && $(TAR) cf ../$(manpages).tar .
gzip -n -9 -f $(manpages).tar
$(RM) -r .doc-tmp-dir
### Cleaning rules
distclean: clean
$(RM) configure
$(RM) config.log config.status config.cache
$(RM) config.mak.autogen config.mak.append
$(RM) -r autom4te.cache
profile-clean:
$(RM) $(addsuffix *.gcda,$(addprefix $(PROFILE_DIR)/, $(object_dirs)))
$(RM) $(addsuffix *.gcno,$(addprefix $(PROFILE_DIR)/, $(object_dirs)))
clean: profile-clean coverage-clean
$(RM) *.o *.res block-sha1/*.o ppc/*.o compat/*.o compat/*/*.o
$(RM) xdiff/*.o vcs-svn/*.o ewah/*.o builtin/*.o
$(RM) $(LIB_FILE) $(XDIFF_LIB) $(VCSSVN_LIB)
$(RM) $(ALL_PROGRAMS) $(SCRIPT_LIB) $(BUILT_INS) git$X
$(RM) $(TEST_PROGRAMS) $(NO_INSTALL)
$(RM) -r bin-wrappers $(dep_dirs)
$(RM) -r po/build/
$(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo common-cmds.h $(ETAGS_TARGET) tags cscope*
$(RM) -r $(GIT_TARNAME) .doc-tmp-dir
$(RM) $(GIT_TARNAME).tar.gz git-core_$(GIT_VERSION)-*.tar.gz
$(RM) $(htmldocs).tar.gz $(manpages).tar.gz
$(MAKE) -C Documentation/ clean
ifndef NO_PERL
$(MAKE) -C gitweb clean
$(MAKE) -C perl clean
endif
$(MAKE) -C templates/ clean
$(MAKE) -C t/ clean
ifndef NO_TCLTK
$(MAKE) -C gitk-git clean
$(MAKE) -C git-gui clean
endif
$(RM) GIT-VERSION-FILE GIT-CFLAGS GIT-LDFLAGS GIT-BUILD-OPTIONS
$(RM) GIT-USER-AGENT GIT-PREFIX GIT-SCRIPT-DEFINES GIT-PYTHON-VARS
.PHONY: all install profile-clean clean strip
.PHONY: shell_compatibility_test please_set_SHELL_PATH_to_a_more_modern_shell
.PHONY: FORCE cscope
### Check documentation
#
ALL_COMMANDS = $(ALL_PROGRAMS) $(SCRIPT_LIB) $(BUILT_INS)
ALL_COMMANDS += git
ALL_COMMANDS += gitk
ALL_COMMANDS += gitweb
ALL_COMMANDS += git-gui git-citool
check-docs::
@(for v in $(ALL_COMMANDS); \
do \
case "$$v" in \
git-merge-octopus | git-merge-ours | git-merge-recursive | \
git-merge-resolve | git-merge-subtree | \
git-fsck-objects | git-init-db | \
git-remote-* | git-stage | \
git-?*--?* ) continue ;; \
esac ; \
test -f "Documentation/$$v.txt" || \
echo "no doc: $$v"; \
sed -e '/^#/d' command-list.txt | \
grep -q "^$$v[ ]" || \
case "$$v" in \
git) ;; \
*) echo "no link: $$v";; \
esac ; \
done; \
( \
sed -e '/^#/d' \
-e 's/[ ].*//' \
-e 's/^/listed /' command-list.txt; \
$(MAKE) -C Documentation print-man1 | \
grep '\.txt$$' | \
sed -e 's|Documentation/|documented |' \
-e 's/\.txt//'; \
) | while read how cmd; \
do \
case " $(ALL_COMMANDS) " in \
*" $$cmd "*) ;; \
*) echo "removed but $$how: $$cmd" ;; \
esac; \
done ) | sort
### Make sure built-ins do not have dups and listed in git.c
#
check-builtins::
./check-builtins.sh
### Test suite coverage testing
#
.PHONY: coverage coverage-clean coverage-compile coverage-test coverage-report
.PHONY: coverage-clean-results
coverage:
$(MAKE) coverage-test
$(MAKE) coverage-untested-functions
object_dirs := $(sort $(dir $(OBJECTS)))
coverage-clean-results:
$(RM) $(addsuffix *.gcov,$(object_dirs))
$(RM) $(addsuffix *.gcda,$(object_dirs))
$(RM) coverage-untested-functions
$(RM) -r cover_db/
$(RM) -r cover_db_html/
coverage-clean: coverage-clean-results
$(RM) $(addsuffix *.gcno,$(object_dirs))
COVERAGE_CFLAGS = $(CFLAGS) -O0 -ftest-coverage -fprofile-arcs
COVERAGE_LDFLAGS = $(CFLAGS) -O0 -lgcov
GCOVFLAGS = --preserve-paths --branch-probabilities --all-blocks
coverage-compile:
$(MAKE) CFLAGS="$(COVERAGE_CFLAGS)" LDFLAGS="$(COVERAGE_LDFLAGS)" all
coverage-test: coverage-clean-results coverage-compile
$(MAKE) CFLAGS="$(COVERAGE_CFLAGS)" LDFLAGS="$(COVERAGE_LDFLAGS)" \
DEFAULT_TEST_TARGET=test -j1 test
coverage-report:
$(QUIET_GCOV)for dir in $(object_dirs); do \
$(GCOV) $(GCOVFLAGS) --object-directory=$$dir $$dir*.c || exit; \
done
coverage-untested-functions: coverage-report
grep '^function.*called 0 ' *.c.gcov \
| sed -e 's/\([^:]*\)\.gcov: *function \([^ ]*\) called.*/\1: \2/' \
> coverage-untested-functions
cover_db: coverage-report
gcov2perl -db cover_db *.gcov
cover_db_html: cover_db
cover -report html -outputdir cover_db_html cover_db
Reference in New Issue View Git Blame Copy Permalink