mirror of
https://github.com/git/git.git
synced 2024-11-25 10:54:00 +08:00
6e773527b6
If we have a full index, then we can convert it to a sparse index by replacing directories outside of the sparse cone with sparse directory entries. The convert_to_sparse() method does this, when the situation is appropriate. For now, we avoid converting the index to a sparse index if: 1. the index is split. 2. the index is already sparse. 3. sparse-checkout is disabled. 4. sparse-checkout does not use cone mode. Finally, we currently limit the conversion to when the GIT_TEST_SPARSE_INDEX environment variable is enabled. A mode using Git config will be added in a later change. The trickiest thing about this conversion is that we might not be able to mark a directory as a sparse directory just because it is outside the sparse cone. There might be unmerged files within that directory, so we need to look for those. Also, if there is some strange reason why a file is not marked with CE_SKIP_WORKTREE, then we should give up on converting that directory. There is still hope that some of its subdirectories might be able to convert to sparse, so we keep looking deeper. The conversion process is assisted by the cache-tree extension. This is calculated from the full index if it does not already exist. We then abandon the cache-tree as it no longer applies to the newly-sparse index. Thus, this cache-tree will be recalculated in every sparse-full-sparse round-trip until we integrate the cache-tree extension with the sparse index. Some Git commands use the index after writing it. For example, 'git add' will update the index, then write it to disk, then read its entries to report information. To keep the in-memory index in a full state after writing, we re-expand it to a full one after the write. This is wasteful for commands that only write the index and do not read from it again, but that is only the case until we make those commands "sparse aware." We can compare the behavior of the sparse-index in t1092-sparse-checkout-compability.sh by using GIT_TEST_SPARSE_INDEX=1 when operating on the 'sparse-index' repo. We can also compare the two sparse repos directly, such as comparing their indexes (when expanded to full in the case of the 'sparse-index' repo). We also verify that the index is actually populated with sparse directory entries. The 'checkout and reset (mixed)' test is marked for failure when comparing a sparse repo to a full repo, but we can compare the two sparse-checkout cases directly to ensure that we are not changing the behavior when using a sparse index. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
1912 lines
66 KiB
C
1912 lines
66 KiB
C
#ifndef CACHE_H
|
|
#define CACHE_H
|
|
|
|
#include "git-compat-util.h"
|
|
#include "strbuf.h"
|
|
#include "hashmap.h"
|
|
#include "list.h"
|
|
#include "advice.h"
|
|
#include "gettext.h"
|
|
#include "convert.h"
|
|
#include "trace.h"
|
|
#include "trace2.h"
|
|
#include "string-list.h"
|
|
#include "pack-revindex.h"
|
|
#include "hash.h"
|
|
#include "path.h"
|
|
#include "oid-array.h"
|
|
#include "repository.h"
|
|
#include "mem-pool.h"
|
|
|
|
#include <zlib.h>
|
|
typedef struct git_zstream {
|
|
z_stream z;
|
|
unsigned long avail_in;
|
|
unsigned long avail_out;
|
|
unsigned long total_in;
|
|
unsigned long total_out;
|
|
unsigned char *next_in;
|
|
unsigned char *next_out;
|
|
} git_zstream;
|
|
|
|
void git_inflate_init(git_zstream *);
|
|
void git_inflate_init_gzip_only(git_zstream *);
|
|
void git_inflate_end(git_zstream *);
|
|
int git_inflate(git_zstream *, int flush);
|
|
|
|
void git_deflate_init(git_zstream *, int level);
|
|
void git_deflate_init_gzip(git_zstream *, int level);
|
|
void git_deflate_init_raw(git_zstream *, int level);
|
|
void git_deflate_end(git_zstream *);
|
|
int git_deflate_abort(git_zstream *);
|
|
int git_deflate_end_gently(git_zstream *);
|
|
int git_deflate(git_zstream *, int flush);
|
|
unsigned long git_deflate_bound(git_zstream *, unsigned long);
|
|
|
|
#if defined(DT_UNKNOWN) && !defined(NO_D_TYPE_IN_DIRENT)
|
|
#define DTYPE(de) ((de)->d_type)
|
|
#else
|
|
#undef DT_UNKNOWN
|
|
#undef DT_DIR
|
|
#undef DT_REG
|
|
#undef DT_LNK
|
|
#define DT_UNKNOWN 0
|
|
#define DT_DIR 1
|
|
#define DT_REG 2
|
|
#define DT_LNK 3
|
|
#define DTYPE(de) DT_UNKNOWN
|
|
#endif
|
|
|
|
/* unknown mode (impossible combination S_IFIFO|S_IFCHR) */
|
|
#define S_IFINVALID 0030000
|
|
|
|
/*
|
|
* A "directory link" is a link to another git directory.
|
|
*
|
|
* The value 0160000 is not normally a valid mode, and
|
|
* also just happens to be S_IFDIR + S_IFLNK
|
|
*/
|
|
#define S_IFGITLINK 0160000
|
|
#define S_ISGITLINK(m) (((m) & S_IFMT) == S_IFGITLINK)
|
|
|
|
/*
|
|
* Some mode bits are also used internally for computations.
|
|
*
|
|
* They *must* not overlap with any valid modes, and they *must* not be emitted
|
|
* to outside world - i.e. appear on disk or network. In other words, it's just
|
|
* temporary fields, which we internally use, but they have to stay in-house.
|
|
*
|
|
* ( such approach is valid, as standard S_IF* fits into 16 bits, and in Git
|
|
* codebase mode is `unsigned int` which is assumed to be at least 32 bits )
|
|
*/
|
|
|
|
/* used internally in tree-diff */
|
|
#define S_DIFFTREE_IFXMIN_NEQ 0x80000000
|
|
|
|
|
|
/*
|
|
* Intensive research over the course of many years has shown that
|
|
* port 9418 is totally unused by anything else. Or
|
|
*
|
|
* Your search - "port 9418" - did not match any documents.
|
|
*
|
|
* as www.google.com puts it.
|
|
*
|
|
* This port has been properly assigned for git use by IANA:
|
|
* git (Assigned-9418) [I06-050728-0001].
|
|
*
|
|
* git 9418/tcp git pack transfer service
|
|
* git 9418/udp git pack transfer service
|
|
*
|
|
* with Linus Torvalds <torvalds@osdl.org> as the point of
|
|
* contact. September 2005.
|
|
*
|
|
* See http://www.iana.org/assignments/port-numbers
|
|
*/
|
|
#define DEFAULT_GIT_PORT 9418
|
|
|
|
/*
|
|
* Basic data structures for the directory cache
|
|
*/
|
|
|
|
#define CACHE_SIGNATURE 0x44495243 /* "DIRC" */
|
|
struct cache_header {
|
|
uint32_t hdr_signature;
|
|
uint32_t hdr_version;
|
|
uint32_t hdr_entries;
|
|
};
|
|
|
|
#define INDEX_FORMAT_LB 2
|
|
#define INDEX_FORMAT_UB 4
|
|
|
|
/*
|
|
* The "cache_time" is just the low 32 bits of the
|
|
* time. It doesn't matter if it overflows - we only
|
|
* check it for equality in the 32 bits we save.
|
|
*/
|
|
struct cache_time {
|
|
uint32_t sec;
|
|
uint32_t nsec;
|
|
};
|
|
|
|
struct stat_data {
|
|
struct cache_time sd_ctime;
|
|
struct cache_time sd_mtime;
|
|
unsigned int sd_dev;
|
|
unsigned int sd_ino;
|
|
unsigned int sd_uid;
|
|
unsigned int sd_gid;
|
|
unsigned int sd_size;
|
|
};
|
|
|
|
struct cache_entry {
|
|
struct hashmap_entry ent;
|
|
struct stat_data ce_stat_data;
|
|
unsigned int ce_mode;
|
|
unsigned int ce_flags;
|
|
unsigned int mem_pool_allocated;
|
|
unsigned int ce_namelen;
|
|
unsigned int index; /* for link extension */
|
|
struct object_id oid;
|
|
char name[FLEX_ARRAY]; /* more */
|
|
};
|
|
|
|
#define CE_STAGEMASK (0x3000)
|
|
#define CE_EXTENDED (0x4000)
|
|
#define CE_VALID (0x8000)
|
|
#define CE_STAGESHIFT 12
|
|
|
|
/*
|
|
* Range 0xFFFF0FFF in ce_flags is divided into
|
|
* two parts: in-memory flags and on-disk ones.
|
|
* Flags in CE_EXTENDED_FLAGS will get saved on-disk
|
|
* if you want to save a new flag, add it in
|
|
* CE_EXTENDED_FLAGS
|
|
*
|
|
* In-memory only flags
|
|
*/
|
|
#define CE_UPDATE (1 << 16)
|
|
#define CE_REMOVE (1 << 17)
|
|
#define CE_UPTODATE (1 << 18)
|
|
#define CE_ADDED (1 << 19)
|
|
|
|
#define CE_HASHED (1 << 20)
|
|
#define CE_FSMONITOR_VALID (1 << 21)
|
|
#define CE_WT_REMOVE (1 << 22) /* remove in work directory */
|
|
#define CE_CONFLICTED (1 << 23)
|
|
|
|
#define CE_UNPACKED (1 << 24)
|
|
#define CE_NEW_SKIP_WORKTREE (1 << 25)
|
|
|
|
/* used to temporarily mark paths matched by pathspecs */
|
|
#define CE_MATCHED (1 << 26)
|
|
|
|
#define CE_UPDATE_IN_BASE (1 << 27)
|
|
#define CE_STRIP_NAME (1 << 28)
|
|
|
|
/*
|
|
* Extended on-disk flags
|
|
*/
|
|
#define CE_INTENT_TO_ADD (1 << 29)
|
|
#define CE_SKIP_WORKTREE (1 << 30)
|
|
/* CE_EXTENDED2 is for future extension */
|
|
#define CE_EXTENDED2 (1U << 31)
|
|
|
|
#define CE_EXTENDED_FLAGS (CE_INTENT_TO_ADD | CE_SKIP_WORKTREE)
|
|
|
|
/*
|
|
* Safeguard to avoid saving wrong flags:
|
|
* - CE_EXTENDED2 won't get saved until its semantic is known
|
|
* - Bits in 0x0000FFFF have been saved in ce_flags already
|
|
* - Bits in 0x003F0000 are currently in-memory flags
|
|
*/
|
|
#if CE_EXTENDED_FLAGS & 0x803FFFFF
|
|
#error "CE_EXTENDED_FLAGS out of range"
|
|
#endif
|
|
|
|
#define S_ISSPARSEDIR(m) ((m) == S_IFDIR)
|
|
|
|
/* Forward structure decls */
|
|
struct pathspec;
|
|
struct child_process;
|
|
struct tree;
|
|
|
|
/*
|
|
* Copy the sha1 and stat state of a cache entry from one to
|
|
* another. But we never change the name, or the hash state!
|
|
*/
|
|
static inline void copy_cache_entry(struct cache_entry *dst,
|
|
const struct cache_entry *src)
|
|
{
|
|
unsigned int state = dst->ce_flags & CE_HASHED;
|
|
int mem_pool_allocated = dst->mem_pool_allocated;
|
|
|
|
/* Don't copy hash chain and name */
|
|
memcpy(&dst->ce_stat_data, &src->ce_stat_data,
|
|
offsetof(struct cache_entry, name) -
|
|
offsetof(struct cache_entry, ce_stat_data));
|
|
|
|
/* Restore the hash state */
|
|
dst->ce_flags = (dst->ce_flags & ~CE_HASHED) | state;
|
|
|
|
/* Restore the mem_pool_allocated flag */
|
|
dst->mem_pool_allocated = mem_pool_allocated;
|
|
}
|
|
|
|
static inline unsigned create_ce_flags(unsigned stage)
|
|
{
|
|
return (stage << CE_STAGESHIFT);
|
|
}
|
|
|
|
#define ce_namelen(ce) ((ce)->ce_namelen)
|
|
#define ce_size(ce) cache_entry_size(ce_namelen(ce))
|
|
#define ce_stage(ce) ((CE_STAGEMASK & (ce)->ce_flags) >> CE_STAGESHIFT)
|
|
#define ce_uptodate(ce) ((ce)->ce_flags & CE_UPTODATE)
|
|
#define ce_skip_worktree(ce) ((ce)->ce_flags & CE_SKIP_WORKTREE)
|
|
#define ce_mark_uptodate(ce) ((ce)->ce_flags |= CE_UPTODATE)
|
|
#define ce_intent_to_add(ce) ((ce)->ce_flags & CE_INTENT_TO_ADD)
|
|
|
|
#define ce_permissions(mode) (((mode) & 0100) ? 0755 : 0644)
|
|
static inline unsigned int create_ce_mode(unsigned int mode)
|
|
{
|
|
if (S_ISLNK(mode))
|
|
return S_IFLNK;
|
|
if (S_ISSPARSEDIR(mode))
|
|
return S_IFDIR;
|
|
if (S_ISDIR(mode) || S_ISGITLINK(mode))
|
|
return S_IFGITLINK;
|
|
return S_IFREG | ce_permissions(mode);
|
|
}
|
|
static inline unsigned int ce_mode_from_stat(const struct cache_entry *ce,
|
|
unsigned int mode)
|
|
{
|
|
extern int trust_executable_bit, has_symlinks;
|
|
if (!has_symlinks && S_ISREG(mode) &&
|
|
ce && S_ISLNK(ce->ce_mode))
|
|
return ce->ce_mode;
|
|
if (!trust_executable_bit && S_ISREG(mode)) {
|
|
if (ce && S_ISREG(ce->ce_mode))
|
|
return ce->ce_mode;
|
|
return create_ce_mode(0666);
|
|
}
|
|
return create_ce_mode(mode);
|
|
}
|
|
static inline int ce_to_dtype(const struct cache_entry *ce)
|
|
{
|
|
unsigned ce_mode = ntohl(ce->ce_mode);
|
|
if (S_ISREG(ce_mode))
|
|
return DT_REG;
|
|
else if (S_ISDIR(ce_mode) || S_ISGITLINK(ce_mode))
|
|
return DT_DIR;
|
|
else if (S_ISLNK(ce_mode))
|
|
return DT_LNK;
|
|
else
|
|
return DT_UNKNOWN;
|
|
}
|
|
static inline unsigned int canon_mode(unsigned int mode)
|
|
{
|
|
if (S_ISREG(mode))
|
|
return S_IFREG | ce_permissions(mode);
|
|
if (S_ISLNK(mode))
|
|
return S_IFLNK;
|
|
if (S_ISDIR(mode))
|
|
return S_IFDIR;
|
|
return S_IFGITLINK;
|
|
}
|
|
|
|
#define cache_entry_size(len) (offsetof(struct cache_entry,name) + (len) + 1)
|
|
|
|
#define SOMETHING_CHANGED (1 << 0) /* unclassified changes go here */
|
|
#define CE_ENTRY_CHANGED (1 << 1)
|
|
#define CE_ENTRY_REMOVED (1 << 2)
|
|
#define CE_ENTRY_ADDED (1 << 3)
|
|
#define RESOLVE_UNDO_CHANGED (1 << 4)
|
|
#define CACHE_TREE_CHANGED (1 << 5)
|
|
#define SPLIT_INDEX_ORDERED (1 << 6)
|
|
#define UNTRACKED_CHANGED (1 << 7)
|
|
#define FSMONITOR_CHANGED (1 << 8)
|
|
|
|
struct split_index;
|
|
struct untracked_cache;
|
|
struct progress;
|
|
struct pattern_list;
|
|
|
|
struct index_state {
|
|
struct cache_entry **cache;
|
|
unsigned int version;
|
|
unsigned int cache_nr, cache_alloc, cache_changed;
|
|
struct string_list *resolve_undo;
|
|
struct cache_tree *cache_tree;
|
|
struct split_index *split_index;
|
|
struct cache_time timestamp;
|
|
unsigned name_hash_initialized : 1,
|
|
initialized : 1,
|
|
drop_cache_tree : 1,
|
|
updated_workdir : 1,
|
|
updated_skipworktree : 1,
|
|
fsmonitor_has_run_once : 1,
|
|
|
|
/*
|
|
* sparse_index == 1 when sparse-directory
|
|
* entries exist. Requires sparse-checkout
|
|
* in cone mode.
|
|
*/
|
|
sparse_index : 1;
|
|
struct hashmap name_hash;
|
|
struct hashmap dir_hash;
|
|
struct object_id oid;
|
|
struct untracked_cache *untracked;
|
|
char *fsmonitor_last_update;
|
|
struct ewah_bitmap *fsmonitor_dirty;
|
|
struct mem_pool *ce_mem_pool;
|
|
struct progress *progress;
|
|
struct repository *repo;
|
|
struct pattern_list *sparse_checkout_patterns;
|
|
};
|
|
|
|
/* Name hashing */
|
|
int test_lazy_init_name_hash(struct index_state *istate, int try_threaded);
|
|
void add_name_hash(struct index_state *istate, struct cache_entry *ce);
|
|
void remove_name_hash(struct index_state *istate, struct cache_entry *ce);
|
|
void free_name_hash(struct index_state *istate);
|
|
|
|
|
|
/* Cache entry creation and cleanup */
|
|
|
|
/*
|
|
* Create cache_entry intended for use in the specified index. Caller
|
|
* is responsible for discarding the cache_entry with
|
|
* `discard_cache_entry`.
|
|
*/
|
|
struct cache_entry *make_cache_entry(struct index_state *istate,
|
|
unsigned int mode,
|
|
const struct object_id *oid,
|
|
const char *path,
|
|
int stage,
|
|
unsigned int refresh_options);
|
|
|
|
struct cache_entry *make_empty_cache_entry(struct index_state *istate,
|
|
size_t name_len);
|
|
|
|
/*
|
|
* Create a cache_entry that is not intended to be added to an index.
|
|
* Caller is responsible for discarding the cache_entry
|
|
* with `discard_cache_entry`.
|
|
*/
|
|
struct cache_entry *make_transient_cache_entry(unsigned int mode,
|
|
const struct object_id *oid,
|
|
const char *path,
|
|
int stage);
|
|
|
|
struct cache_entry *make_empty_transient_cache_entry(size_t name_len);
|
|
|
|
/*
|
|
* Discard cache entry.
|
|
*/
|
|
void discard_cache_entry(struct cache_entry *ce);
|
|
|
|
/*
|
|
* Check configuration if we should perform extra validation on cache
|
|
* entries.
|
|
*/
|
|
int should_validate_cache_entries(void);
|
|
|
|
/*
|
|
* Duplicate a cache_entry. Allocate memory for the new entry from a
|
|
* memory_pool. Takes into account cache_entry fields that are meant
|
|
* for managing the underlying memory allocation of the cache_entry.
|
|
*/
|
|
struct cache_entry *dup_cache_entry(const struct cache_entry *ce, struct index_state *istate);
|
|
|
|
/*
|
|
* Validate the cache entries in the index. This is an internal
|
|
* consistency check that the cache_entry structs are allocated from
|
|
* the expected memory pool.
|
|
*/
|
|
void validate_cache_entries(const struct index_state *istate);
|
|
|
|
#ifdef USE_THE_INDEX_COMPATIBILITY_MACROS
|
|
extern struct index_state the_index;
|
|
|
|
#define active_cache (the_index.cache)
|
|
#define active_nr (the_index.cache_nr)
|
|
#define active_alloc (the_index.cache_alloc)
|
|
#define active_cache_changed (the_index.cache_changed)
|
|
#define active_cache_tree (the_index.cache_tree)
|
|
|
|
#define read_cache() repo_read_index(the_repository)
|
|
#define read_cache_from(path) read_index_from(&the_index, (path), (get_git_dir()))
|
|
#define read_cache_preload(pathspec) repo_read_index_preload(the_repository, (pathspec), 0)
|
|
#define is_cache_unborn() is_index_unborn(&the_index)
|
|
#define read_cache_unmerged() repo_read_index_unmerged(the_repository)
|
|
#define discard_cache() discard_index(&the_index)
|
|
#define unmerged_cache() unmerged_index(&the_index)
|
|
#define cache_name_pos(name, namelen) index_name_pos(&the_index,(name),(namelen))
|
|
#define add_cache_entry(ce, option) add_index_entry(&the_index, (ce), (option))
|
|
#define rename_cache_entry_at(pos, new_name) rename_index_entry_at(&the_index, (pos), (new_name))
|
|
#define remove_cache_entry_at(pos) remove_index_entry_at(&the_index, (pos))
|
|
#define remove_file_from_cache(path) remove_file_from_index(&the_index, (path))
|
|
#define add_to_cache(path, st, flags) add_to_index(&the_index, (path), (st), (flags))
|
|
#define add_file_to_cache(path, flags) add_file_to_index(&the_index, (path), (flags))
|
|
#define chmod_cache_entry(ce, flip) chmod_index_entry(&the_index, (ce), (flip))
|
|
#define refresh_cache(flags) refresh_index(&the_index, (flags), NULL, NULL, NULL)
|
|
#define refresh_and_write_cache(refresh_flags, write_flags, gentle) repo_refresh_and_write_index(the_repository, (refresh_flags), (write_flags), (gentle), NULL, NULL, NULL)
|
|
#define ce_match_stat(ce, st, options) ie_match_stat(&the_index, (ce), (st), (options))
|
|
#define ce_modified(ce, st, options) ie_modified(&the_index, (ce), (st), (options))
|
|
#define cache_dir_exists(name, namelen) index_dir_exists(&the_index, (name), (namelen))
|
|
#define cache_file_exists(name, namelen, igncase) index_file_exists(&the_index, (name), (namelen), (igncase))
|
|
#define cache_name_is_other(name, namelen) index_name_is_other(&the_index, (name), (namelen))
|
|
#define resolve_undo_clear() resolve_undo_clear_index(&the_index)
|
|
#define unmerge_cache_entry_at(at) unmerge_index_entry_at(&the_index, at)
|
|
#define unmerge_cache(pathspec) unmerge_index(&the_index, pathspec)
|
|
#define read_blob_data_from_cache(path, sz) read_blob_data_from_index(&the_index, (path), (sz))
|
|
#define hold_locked_index(lock_file, flags) repo_hold_locked_index(the_repository, (lock_file), (flags))
|
|
#endif
|
|
|
|
#define TYPE_BITS 3
|
|
|
|
/*
|
|
* Values in this enum (except those outside the 3 bit range) are part
|
|
* of pack file format. See Documentation/technical/pack-format.txt
|
|
* for more information.
|
|
*/
|
|
enum object_type {
|
|
OBJ_BAD = -1,
|
|
OBJ_NONE = 0,
|
|
OBJ_COMMIT = 1,
|
|
OBJ_TREE = 2,
|
|
OBJ_BLOB = 3,
|
|
OBJ_TAG = 4,
|
|
/* 5 for future expansion */
|
|
OBJ_OFS_DELTA = 6,
|
|
OBJ_REF_DELTA = 7,
|
|
OBJ_ANY,
|
|
OBJ_MAX
|
|
};
|
|
|
|
static inline enum object_type object_type(unsigned int mode)
|
|
{
|
|
return S_ISDIR(mode) ? OBJ_TREE :
|
|
S_ISGITLINK(mode) ? OBJ_COMMIT :
|
|
OBJ_BLOB;
|
|
}
|
|
|
|
/* Double-check local_repo_env below if you add to this list. */
|
|
#define GIT_DIR_ENVIRONMENT "GIT_DIR"
|
|
#define GIT_COMMON_DIR_ENVIRONMENT "GIT_COMMON_DIR"
|
|
#define GIT_NAMESPACE_ENVIRONMENT "GIT_NAMESPACE"
|
|
#define GIT_WORK_TREE_ENVIRONMENT "GIT_WORK_TREE"
|
|
#define GIT_PREFIX_ENVIRONMENT "GIT_PREFIX"
|
|
#define GIT_SUPER_PREFIX_ENVIRONMENT "GIT_INTERNAL_SUPER_PREFIX"
|
|
#define DEFAULT_GIT_DIR_ENVIRONMENT ".git"
|
|
#define DB_ENVIRONMENT "GIT_OBJECT_DIRECTORY"
|
|
#define INDEX_ENVIRONMENT "GIT_INDEX_FILE"
|
|
#define GRAFT_ENVIRONMENT "GIT_GRAFT_FILE"
|
|
#define GIT_SHALLOW_FILE_ENVIRONMENT "GIT_SHALLOW_FILE"
|
|
#define TEMPLATE_DIR_ENVIRONMENT "GIT_TEMPLATE_DIR"
|
|
#define CONFIG_ENVIRONMENT "GIT_CONFIG"
|
|
#define CONFIG_DATA_ENVIRONMENT "GIT_CONFIG_PARAMETERS"
|
|
#define CONFIG_COUNT_ENVIRONMENT "GIT_CONFIG_COUNT"
|
|
#define EXEC_PATH_ENVIRONMENT "GIT_EXEC_PATH"
|
|
#define CEILING_DIRECTORIES_ENVIRONMENT "GIT_CEILING_DIRECTORIES"
|
|
#define NO_REPLACE_OBJECTS_ENVIRONMENT "GIT_NO_REPLACE_OBJECTS"
|
|
#define GIT_REPLACE_REF_BASE_ENVIRONMENT "GIT_REPLACE_REF_BASE"
|
|
#define GITATTRIBUTES_FILE ".gitattributes"
|
|
#define INFOATTRIBUTES_FILE "info/attributes"
|
|
#define ATTRIBUTE_MACRO_PREFIX "[attr]"
|
|
#define GITMODULES_FILE ".gitmodules"
|
|
#define GITMODULES_INDEX ":.gitmodules"
|
|
#define GITMODULES_HEAD "HEAD:.gitmodules"
|
|
#define GIT_NOTES_REF_ENVIRONMENT "GIT_NOTES_REF"
|
|
#define GIT_NOTES_DEFAULT_REF "refs/notes/commits"
|
|
#define GIT_NOTES_DISPLAY_REF_ENVIRONMENT "GIT_NOTES_DISPLAY_REF"
|
|
#define GIT_NOTES_REWRITE_REF_ENVIRONMENT "GIT_NOTES_REWRITE_REF"
|
|
#define GIT_NOTES_REWRITE_MODE_ENVIRONMENT "GIT_NOTES_REWRITE_MODE"
|
|
#define GIT_LITERAL_PATHSPECS_ENVIRONMENT "GIT_LITERAL_PATHSPECS"
|
|
#define GIT_GLOB_PATHSPECS_ENVIRONMENT "GIT_GLOB_PATHSPECS"
|
|
#define GIT_NOGLOB_PATHSPECS_ENVIRONMENT "GIT_NOGLOB_PATHSPECS"
|
|
#define GIT_ICASE_PATHSPECS_ENVIRONMENT "GIT_ICASE_PATHSPECS"
|
|
#define GIT_QUARANTINE_ENVIRONMENT "GIT_QUARANTINE_PATH"
|
|
#define GIT_OPTIONAL_LOCKS_ENVIRONMENT "GIT_OPTIONAL_LOCKS"
|
|
#define GIT_TEXT_DOMAIN_DIR_ENVIRONMENT "GIT_TEXTDOMAINDIR"
|
|
|
|
/*
|
|
* Environment variable used in handshaking the wire protocol.
|
|
* Contains a colon ':' separated list of keys with optional values
|
|
* 'key[=value]'. Presence of unknown keys and values must be
|
|
* ignored.
|
|
*/
|
|
#define GIT_PROTOCOL_ENVIRONMENT "GIT_PROTOCOL"
|
|
/* HTTP header used to handshake the wire protocol */
|
|
#define GIT_PROTOCOL_HEADER "Git-Protocol"
|
|
|
|
/*
|
|
* This environment variable is expected to contain a boolean indicating
|
|
* whether we should or should not treat:
|
|
*
|
|
* GIT_DIR=foo.git git ...
|
|
*
|
|
* as if GIT_WORK_TREE=. was given. It's not expected that users will make use
|
|
* of this, but we use it internally to communicate to sub-processes that we
|
|
* are in a bare repo. If not set, defaults to true.
|
|
*/
|
|
#define GIT_IMPLICIT_WORK_TREE_ENVIRONMENT "GIT_IMPLICIT_WORK_TREE"
|
|
|
|
/*
|
|
* Repository-local GIT_* environment variables; these will be cleared
|
|
* when git spawns a sub-process that runs inside another repository.
|
|
* The array is NULL-terminated, which makes it easy to pass in the "env"
|
|
* parameter of a run-command invocation, or to do a simple walk.
|
|
*/
|
|
extern const char * const local_repo_env[];
|
|
|
|
void setup_git_env(const char *git_dir);
|
|
|
|
/*
|
|
* Returns true iff we have a configured git repository (either via
|
|
* setup_git_directory, or in the environment via $GIT_DIR).
|
|
*/
|
|
int have_git_dir(void);
|
|
|
|
extern int is_bare_repository_cfg;
|
|
int is_bare_repository(void);
|
|
int is_inside_git_dir(void);
|
|
extern char *git_work_tree_cfg;
|
|
int is_inside_work_tree(void);
|
|
const char *get_git_dir(void);
|
|
const char *get_git_common_dir(void);
|
|
char *get_object_directory(void);
|
|
char *get_index_file(void);
|
|
char *get_graft_file(struct repository *r);
|
|
void set_git_dir(const char *path, int make_realpath);
|
|
int get_common_dir_noenv(struct strbuf *sb, const char *gitdir);
|
|
int get_common_dir(struct strbuf *sb, const char *gitdir);
|
|
const char *get_git_namespace(void);
|
|
const char *strip_namespace(const char *namespaced_ref);
|
|
const char *get_super_prefix(void);
|
|
const char *get_git_work_tree(void);
|
|
|
|
/*
|
|
* Return true if the given path is a git directory; note that this _just_
|
|
* looks at the directory itself. If you want to know whether "foo/.git"
|
|
* is a repository, you must feed that path, not just "foo".
|
|
*/
|
|
int is_git_directory(const char *path);
|
|
|
|
/*
|
|
* Return 1 if the given path is the root of a git repository or
|
|
* submodule, else 0. Will not return 1 for bare repositories with the
|
|
* exception of creating a bare repository in "foo/.git" and calling
|
|
* is_git_repository("foo").
|
|
*
|
|
* If we run into read errors, we err on the side of saying "yes, it is",
|
|
* as we usually consider sub-repos precious, and would prefer to err on the
|
|
* side of not disrupting or deleting them.
|
|
*/
|
|
int is_nonbare_repository_dir(struct strbuf *path);
|
|
|
|
#define READ_GITFILE_ERR_STAT_FAILED 1
|
|
#define READ_GITFILE_ERR_NOT_A_FILE 2
|
|
#define READ_GITFILE_ERR_OPEN_FAILED 3
|
|
#define READ_GITFILE_ERR_READ_FAILED 4
|
|
#define READ_GITFILE_ERR_INVALID_FORMAT 5
|
|
#define READ_GITFILE_ERR_NO_PATH 6
|
|
#define READ_GITFILE_ERR_NOT_A_REPO 7
|
|
#define READ_GITFILE_ERR_TOO_LARGE 8
|
|
void read_gitfile_error_die(int error_code, const char *path, const char *dir);
|
|
const char *read_gitfile_gently(const char *path, int *return_error_code);
|
|
#define read_gitfile(path) read_gitfile_gently((path), NULL)
|
|
const char *resolve_gitdir_gently(const char *suspect, int *return_error_code);
|
|
#define resolve_gitdir(path) resolve_gitdir_gently((path), NULL)
|
|
|
|
void set_git_work_tree(const char *tree);
|
|
|
|
#define ALTERNATE_DB_ENVIRONMENT "GIT_ALTERNATE_OBJECT_DIRECTORIES"
|
|
|
|
void setup_work_tree(void);
|
|
/*
|
|
* Find the commondir and gitdir of the repository that contains the current
|
|
* working directory, without changing the working directory or other global
|
|
* state. The result is appended to commondir and gitdir. If the discovered
|
|
* gitdir does not correspond to a worktree, then 'commondir' and 'gitdir' will
|
|
* both have the same result appended to the buffer. The return value is
|
|
* either 0 upon success and non-zero if no repository was found.
|
|
*/
|
|
int discover_git_directory(struct strbuf *commondir,
|
|
struct strbuf *gitdir);
|
|
const char *setup_git_directory_gently(int *);
|
|
const char *setup_git_directory(void);
|
|
char *prefix_path(const char *prefix, int len, const char *path);
|
|
char *prefix_path_gently(const char *prefix, int len, int *remaining, const char *path);
|
|
|
|
/*
|
|
* Concatenate "prefix" (if len is non-zero) and "path", with no
|
|
* connecting characters (so "prefix" should end with a "/").
|
|
* Unlike prefix_path, this should be used if the named file does
|
|
* not have to interact with index entry; i.e. name of a random file
|
|
* on the filesystem.
|
|
*
|
|
* The return value is always a newly allocated string (even if the
|
|
* prefix was empty).
|
|
*/
|
|
char *prefix_filename(const char *prefix, const char *path);
|
|
|
|
int check_filename(const char *prefix, const char *name);
|
|
void verify_filename(const char *prefix,
|
|
const char *name,
|
|
int diagnose_misspelt_rev);
|
|
void verify_non_filename(const char *prefix, const char *name);
|
|
int path_inside_repo(const char *prefix, const char *path);
|
|
|
|
#define INIT_DB_QUIET 0x0001
|
|
#define INIT_DB_EXIST_OK 0x0002
|
|
|
|
int init_db(const char *git_dir, const char *real_git_dir,
|
|
const char *template_dir, int hash_algo,
|
|
const char *initial_branch, unsigned int flags);
|
|
void initialize_repository_version(int hash_algo, int reinit);
|
|
|
|
void sanitize_stdfds(void);
|
|
int daemonize(void);
|
|
|
|
#define alloc_nr(x) (((x)+16)*3/2)
|
|
|
|
/**
|
|
* Dynamically growing an array using realloc() is error prone and boring.
|
|
*
|
|
* Define your array with:
|
|
*
|
|
* - a pointer (`item`) that points at the array, initialized to `NULL`
|
|
* (although please name the variable based on its contents, not on its
|
|
* type);
|
|
*
|
|
* - an integer variable (`alloc`) that keeps track of how big the current
|
|
* allocation is, initialized to `0`;
|
|
*
|
|
* - another integer variable (`nr`) to keep track of how many elements the
|
|
* array currently has, initialized to `0`.
|
|
*
|
|
* Then before adding `n`th element to the item, call `ALLOC_GROW(item, n,
|
|
* alloc)`. This ensures that the array can hold at least `n` elements by
|
|
* calling `realloc(3)` and adjusting `alloc` variable.
|
|
*
|
|
* ------------
|
|
* sometype *item;
|
|
* size_t nr;
|
|
* size_t alloc
|
|
*
|
|
* for (i = 0; i < nr; i++)
|
|
* if (we like item[i] already)
|
|
* return;
|
|
*
|
|
* // we did not like any existing one, so add one
|
|
* ALLOC_GROW(item, nr + 1, alloc);
|
|
* item[nr++] = value you like;
|
|
* ------------
|
|
*
|
|
* You are responsible for updating the `nr` variable.
|
|
*
|
|
* If you need to specify the number of elements to allocate explicitly
|
|
* then use the macro `REALLOC_ARRAY(item, alloc)` instead of `ALLOC_GROW`.
|
|
*
|
|
* Consider using ALLOC_GROW_BY instead of ALLOC_GROW as it has some
|
|
* added niceties.
|
|
*
|
|
* DO NOT USE any expression with side-effect for 'x', 'nr', or 'alloc'.
|
|
*/
|
|
#define ALLOC_GROW(x, nr, alloc) \
|
|
do { \
|
|
if ((nr) > alloc) { \
|
|
if (alloc_nr(alloc) < (nr)) \
|
|
alloc = (nr); \
|
|
else \
|
|
alloc = alloc_nr(alloc); \
|
|
REALLOC_ARRAY(x, alloc); \
|
|
} \
|
|
} while (0)
|
|
|
|
/*
|
|
* Similar to ALLOC_GROW but handles updating of the nr value and
|
|
* zeroing the bytes of the newly-grown array elements.
|
|
*
|
|
* DO NOT USE any expression with side-effect for any of the
|
|
* arguments.
|
|
*/
|
|
#define ALLOC_GROW_BY(x, nr, increase, alloc) \
|
|
do { \
|
|
if (increase) { \
|
|
size_t new_nr = nr + (increase); \
|
|
if (new_nr < nr) \
|
|
BUG("negative growth in ALLOC_GROW_BY"); \
|
|
ALLOC_GROW(x, new_nr, alloc); \
|
|
memset((x) + nr, 0, sizeof(*(x)) * (increase)); \
|
|
nr = new_nr; \
|
|
} \
|
|
} while (0)
|
|
|
|
/* Initialize and use the cache information */
|
|
struct lock_file;
|
|
void preload_index(struct index_state *index,
|
|
const struct pathspec *pathspec,
|
|
unsigned int refresh_flags);
|
|
int do_read_index(struct index_state *istate, const char *path,
|
|
int must_exist); /* for testting only! */
|
|
int read_index_from(struct index_state *, const char *path,
|
|
const char *gitdir);
|
|
int is_index_unborn(struct index_state *);
|
|
|
|
void ensure_full_index(struct index_state *istate);
|
|
|
|
/* For use with `write_locked_index()`. */
|
|
#define COMMIT_LOCK (1 << 0)
|
|
#define SKIP_IF_UNCHANGED (1 << 1)
|
|
|
|
/*
|
|
* Write the index while holding an already-taken lock. Close the lock,
|
|
* and if `COMMIT_LOCK` is given, commit it.
|
|
*
|
|
* Unless a split index is in use, write the index into the lockfile.
|
|
*
|
|
* With a split index, write the shared index to a temporary file,
|
|
* adjust its permissions and rename it into place, then write the
|
|
* split index to the lockfile. If the temporary file for the shared
|
|
* index cannot be created, fall back to the behavior described in
|
|
* the previous paragraph.
|
|
*
|
|
* With `COMMIT_LOCK`, the lock is always committed or rolled back.
|
|
* Without it, the lock is closed, but neither committed nor rolled
|
|
* back.
|
|
*
|
|
* If `SKIP_IF_UNCHANGED` is given and the index is unchanged, nothing
|
|
* is written (and the lock is rolled back if `COMMIT_LOCK` is given).
|
|
*/
|
|
int write_locked_index(struct index_state *, struct lock_file *lock, unsigned flags);
|
|
|
|
int discard_index(struct index_state *);
|
|
void move_index_extensions(struct index_state *dst, struct index_state *src);
|
|
int unmerged_index(const struct index_state *);
|
|
|
|
/**
|
|
* Returns 1 if istate differs from tree, 0 otherwise. If tree is NULL,
|
|
* compares istate to HEAD. If tree is NULL and on an unborn branch,
|
|
* returns 1 if there are entries in istate, 0 otherwise. If an strbuf is
|
|
* provided, the space-separated list of files that differ will be appended
|
|
* to it.
|
|
*/
|
|
int repo_index_has_changes(struct repository *repo,
|
|
struct tree *tree,
|
|
struct strbuf *sb);
|
|
|
|
int verify_path(const char *path, unsigned mode);
|
|
int strcmp_offset(const char *s1, const char *s2, size_t *first_change);
|
|
int index_dir_exists(struct index_state *istate, const char *name, int namelen);
|
|
void adjust_dirname_case(struct index_state *istate, char *name);
|
|
struct cache_entry *index_file_exists(struct index_state *istate, const char *name, int namelen, int igncase);
|
|
|
|
/*
|
|
* Searches for an entry defined by name and namelen in the given index.
|
|
* If the return value is positive (including 0) it is the position of an
|
|
* exact match. If the return value is negative, the negated value minus 1
|
|
* is the position where the entry would be inserted.
|
|
* Example: The current index consists of these files and its stages:
|
|
*
|
|
* b#0, d#0, f#1, f#3
|
|
*
|
|
* index_name_pos(&index, "a", 1) -> -1
|
|
* index_name_pos(&index, "b", 1) -> 0
|
|
* index_name_pos(&index, "c", 1) -> -2
|
|
* index_name_pos(&index, "d", 1) -> 1
|
|
* index_name_pos(&index, "e", 1) -> -3
|
|
* index_name_pos(&index, "f", 1) -> -3
|
|
* index_name_pos(&index, "g", 1) -> -5
|
|
*/
|
|
int index_name_pos(const struct index_state *, const char *name, int namelen);
|
|
|
|
/*
|
|
* Some functions return the negative complement of an insert position when a
|
|
* precise match was not found but a position was found where the entry would
|
|
* need to be inserted. This helper protects that logic from any integer
|
|
* underflow.
|
|
*/
|
|
static inline int index_pos_to_insert_pos(uintmax_t pos)
|
|
{
|
|
if (pos > INT_MAX)
|
|
die("overflow: -1 - %"PRIuMAX, pos);
|
|
return -1 - (int)pos;
|
|
}
|
|
|
|
#define ADD_CACHE_OK_TO_ADD 1 /* Ok to add */
|
|
#define ADD_CACHE_OK_TO_REPLACE 2 /* Ok to replace file/directory */
|
|
#define ADD_CACHE_SKIP_DFCHECK 4 /* Ok to skip DF conflict checks */
|
|
#define ADD_CACHE_JUST_APPEND 8 /* Append only */
|
|
#define ADD_CACHE_NEW_ONLY 16 /* Do not replace existing ones */
|
|
#define ADD_CACHE_KEEP_CACHE_TREE 32 /* Do not invalidate cache-tree */
|
|
#define ADD_CACHE_RENORMALIZE 64 /* Pass along HASH_RENORMALIZE */
|
|
int add_index_entry(struct index_state *, struct cache_entry *ce, int option);
|
|
void rename_index_entry_at(struct index_state *, int pos, const char *new_name);
|
|
|
|
/* Remove entry, return true if there are more entries to go. */
|
|
int remove_index_entry_at(struct index_state *, int pos);
|
|
|
|
void remove_marked_cache_entries(struct index_state *istate, int invalidate);
|
|
int remove_file_from_index(struct index_state *, const char *path);
|
|
#define ADD_CACHE_VERBOSE 1
|
|
#define ADD_CACHE_PRETEND 2
|
|
#define ADD_CACHE_IGNORE_ERRORS 4
|
|
#define ADD_CACHE_IGNORE_REMOVAL 8
|
|
#define ADD_CACHE_INTENT 16
|
|
/*
|
|
* These two are used to add the contents of the file at path
|
|
* to the index, marking the working tree up-to-date by storing
|
|
* the cached stat info in the resulting cache entry. A caller
|
|
* that has already run lstat(2) on the path can call
|
|
* add_to_index(), and all others can call add_file_to_index();
|
|
* the latter will do necessary lstat(2) internally before
|
|
* calling the former.
|
|
*/
|
|
int add_to_index(struct index_state *, const char *path, struct stat *, int flags);
|
|
int add_file_to_index(struct index_state *, const char *path, int flags);
|
|
|
|
int chmod_index_entry(struct index_state *, struct cache_entry *ce, char flip);
|
|
int ce_same_name(const struct cache_entry *a, const struct cache_entry *b);
|
|
void set_object_name_for_intent_to_add_entry(struct cache_entry *ce);
|
|
int index_name_is_other(const struct index_state *, const char *, int);
|
|
void *read_blob_data_from_index(const struct index_state *, const char *, unsigned long *);
|
|
|
|
/* do stat comparison even if CE_VALID is true */
|
|
#define CE_MATCH_IGNORE_VALID 01
|
|
/* do not check the contents but report dirty on racily-clean entries */
|
|
#define CE_MATCH_RACY_IS_DIRTY 02
|
|
/* do stat comparison even if CE_SKIP_WORKTREE is true */
|
|
#define CE_MATCH_IGNORE_SKIP_WORKTREE 04
|
|
/* ignore non-existent files during stat update */
|
|
#define CE_MATCH_IGNORE_MISSING 0x08
|
|
/* enable stat refresh */
|
|
#define CE_MATCH_REFRESH 0x10
|
|
/* don't refresh_fsmonitor state or do stat comparison even if CE_FSMONITOR_VALID is true */
|
|
#define CE_MATCH_IGNORE_FSMONITOR 0X20
|
|
int is_racy_timestamp(const struct index_state *istate,
|
|
const struct cache_entry *ce);
|
|
int ie_match_stat(struct index_state *, const struct cache_entry *, struct stat *, unsigned int);
|
|
int ie_modified(struct index_state *, const struct cache_entry *, struct stat *, unsigned int);
|
|
|
|
#define HASH_WRITE_OBJECT 1
|
|
#define HASH_FORMAT_CHECK 2
|
|
#define HASH_RENORMALIZE 4
|
|
int index_fd(struct index_state *istate, struct object_id *oid, int fd, struct stat *st, enum object_type type, const char *path, unsigned flags);
|
|
int index_path(struct index_state *istate, struct object_id *oid, const char *path, struct stat *st, unsigned flags);
|
|
|
|
/*
|
|
* Record to sd the data from st that we use to check whether a file
|
|
* might have changed.
|
|
*/
|
|
void fill_stat_data(struct stat_data *sd, struct stat *st);
|
|
|
|
/*
|
|
* Return 0 if st is consistent with a file not having been changed
|
|
* since sd was filled. If there are differences, return a
|
|
* combination of MTIME_CHANGED, CTIME_CHANGED, OWNER_CHANGED,
|
|
* INODE_CHANGED, and DATA_CHANGED.
|
|
*/
|
|
int match_stat_data(const struct stat_data *sd, struct stat *st);
|
|
int match_stat_data_racy(const struct index_state *istate,
|
|
const struct stat_data *sd, struct stat *st);
|
|
|
|
void fill_stat_cache_info(struct index_state *istate, struct cache_entry *ce, struct stat *st);
|
|
|
|
#define REFRESH_REALLY 0x0001 /* ignore_valid */
|
|
#define REFRESH_UNMERGED 0x0002 /* allow unmerged */
|
|
#define REFRESH_QUIET 0x0004 /* be quiet about it */
|
|
#define REFRESH_IGNORE_MISSING 0x0008 /* ignore non-existent */
|
|
#define REFRESH_IGNORE_SUBMODULES 0x0010 /* ignore submodules */
|
|
#define REFRESH_IN_PORCELAIN 0x0020 /* user friendly output, not "needs update" */
|
|
#define REFRESH_PROGRESS 0x0040 /* show progress bar if stderr is tty */
|
|
int refresh_index(struct index_state *, unsigned int flags, const struct pathspec *pathspec, char *seen, const char *header_msg);
|
|
/*
|
|
* Refresh the index and write it to disk.
|
|
*
|
|
* 'refresh_flags' is passed directly to 'refresh_index()', while
|
|
* 'COMMIT_LOCK | write_flags' is passed to 'write_locked_index()', so
|
|
* the lockfile is always either committed or rolled back.
|
|
*
|
|
* If 'gentle' is passed, errors locking the index are ignored.
|
|
*
|
|
* Return 1 if refreshing the index returns an error, -1 if writing
|
|
* the index to disk fails, 0 on success.
|
|
*
|
|
* Note that if refreshing the index returns an error, we still write
|
|
* out the index (unless locking fails).
|
|
*/
|
|
int repo_refresh_and_write_index(struct repository*, unsigned int refresh_flags, unsigned int write_flags, int gentle, const struct pathspec *, char *seen, const char *header_msg);
|
|
|
|
struct cache_entry *refresh_cache_entry(struct index_state *, struct cache_entry *, unsigned int);
|
|
|
|
void set_alternate_index_output(const char *);
|
|
|
|
extern int verify_index_checksum;
|
|
extern int verify_ce_order;
|
|
|
|
/* Environment bits from configuration mechanism */
|
|
extern int trust_executable_bit;
|
|
extern int trust_ctime;
|
|
extern int check_stat;
|
|
extern int quote_path_fully;
|
|
extern int has_symlinks;
|
|
extern int minimum_abbrev, default_abbrev;
|
|
extern int ignore_case;
|
|
extern int assume_unchanged;
|
|
extern int prefer_symlink_refs;
|
|
extern int warn_ambiguous_refs;
|
|
extern int warn_on_object_refname_ambiguity;
|
|
extern char *apply_default_whitespace;
|
|
extern char *apply_default_ignorewhitespace;
|
|
extern const char *git_attributes_file;
|
|
extern const char *git_hooks_path;
|
|
extern int zlib_compression_level;
|
|
extern int core_compression_level;
|
|
extern int pack_compression_level;
|
|
extern size_t packed_git_window_size;
|
|
extern size_t packed_git_limit;
|
|
extern size_t delta_base_cache_limit;
|
|
extern unsigned long big_file_threshold;
|
|
extern unsigned long pack_size_limit_cfg;
|
|
|
|
/*
|
|
* Accessors for the core.sharedrepository config which lazy-load the value
|
|
* from the config (if not already set). The "reset" function can be
|
|
* used to unset "set" or cached value, meaning that the value will be loaded
|
|
* fresh from the config file on the next call to get_shared_repository().
|
|
*/
|
|
void set_shared_repository(int value);
|
|
int get_shared_repository(void);
|
|
void reset_shared_repository(void);
|
|
|
|
/*
|
|
* Do replace refs need to be checked this run? This variable is
|
|
* initialized to true unless --no-replace-object is used or
|
|
* $GIT_NO_REPLACE_OBJECTS is set, but is set to false by some
|
|
* commands that do not want replace references to be active.
|
|
*/
|
|
extern int read_replace_refs;
|
|
extern char *git_replace_ref_base;
|
|
|
|
extern int fsync_object_files;
|
|
extern int core_preload_index;
|
|
extern int precomposed_unicode;
|
|
extern int protect_hfs;
|
|
extern int protect_ntfs;
|
|
extern const char *core_fsmonitor;
|
|
|
|
extern int core_apply_sparse_checkout;
|
|
extern int core_sparse_checkout_cone;
|
|
|
|
/*
|
|
* Include broken refs in all ref iterations, which will
|
|
* generally choke dangerous operations rather than letting
|
|
* them silently proceed without taking the broken ref into
|
|
* account.
|
|
*/
|
|
extern int ref_paranoia;
|
|
|
|
/*
|
|
* Returns the boolean value of $GIT_OPTIONAL_LOCKS (or the default value).
|
|
*/
|
|
int use_optional_locks(void);
|
|
|
|
/*
|
|
* The character that begins a commented line in user-editable file
|
|
* that is subject to stripspace.
|
|
*/
|
|
extern char comment_line_char;
|
|
extern int auto_comment_line_char;
|
|
|
|
enum log_refs_config {
|
|
LOG_REFS_UNSET = -1,
|
|
LOG_REFS_NONE = 0,
|
|
LOG_REFS_NORMAL,
|
|
LOG_REFS_ALWAYS
|
|
};
|
|
extern enum log_refs_config log_all_ref_updates;
|
|
|
|
enum rebase_setup_type {
|
|
AUTOREBASE_NEVER = 0,
|
|
AUTOREBASE_LOCAL,
|
|
AUTOREBASE_REMOTE,
|
|
AUTOREBASE_ALWAYS
|
|
};
|
|
|
|
enum push_default_type {
|
|
PUSH_DEFAULT_NOTHING = 0,
|
|
PUSH_DEFAULT_MATCHING,
|
|
PUSH_DEFAULT_SIMPLE,
|
|
PUSH_DEFAULT_UPSTREAM,
|
|
PUSH_DEFAULT_CURRENT,
|
|
PUSH_DEFAULT_UNSPECIFIED
|
|
};
|
|
|
|
extern enum rebase_setup_type autorebase;
|
|
extern enum push_default_type push_default;
|
|
|
|
enum object_creation_mode {
|
|
OBJECT_CREATION_USES_HARDLINKS = 0,
|
|
OBJECT_CREATION_USES_RENAMES = 1
|
|
};
|
|
|
|
extern enum object_creation_mode object_creation_mode;
|
|
|
|
extern char *notes_ref_name;
|
|
|
|
extern int grafts_replace_parents;
|
|
|
|
/*
|
|
* GIT_REPO_VERSION is the version we write by default. The
|
|
* _READ variant is the highest number we know how to
|
|
* handle.
|
|
*/
|
|
#define GIT_REPO_VERSION 0
|
|
#define GIT_REPO_VERSION_READ 1
|
|
extern int repository_format_precious_objects;
|
|
extern int repository_format_worktree_config;
|
|
|
|
/*
|
|
* You _have_ to initialize a `struct repository_format` using
|
|
* `= REPOSITORY_FORMAT_INIT` before calling `read_repository_format()`.
|
|
*/
|
|
struct repository_format {
|
|
int version;
|
|
int precious_objects;
|
|
char *partial_clone; /* value of extensions.partialclone */
|
|
int worktree_config;
|
|
int is_bare;
|
|
int hash_algo;
|
|
char *work_tree;
|
|
struct string_list unknown_extensions;
|
|
struct string_list v1_only_extensions;
|
|
};
|
|
|
|
/*
|
|
* Always use this to initialize a `struct repository_format`
|
|
* to a well-defined, default state before calling
|
|
* `read_repository()`.
|
|
*/
|
|
#define REPOSITORY_FORMAT_INIT \
|
|
{ \
|
|
.version = -1, \
|
|
.is_bare = -1, \
|
|
.hash_algo = GIT_HASH_SHA1, \
|
|
.unknown_extensions = STRING_LIST_INIT_DUP, \
|
|
.v1_only_extensions = STRING_LIST_INIT_DUP, \
|
|
}
|
|
|
|
/*
|
|
* Read the repository format characteristics from the config file "path" into
|
|
* "format" struct. Returns the numeric version. On error, or if no version is
|
|
* found in the configuration, -1 is returned, format->version is set to -1,
|
|
* and all other fields in the struct are set to the default configuration
|
|
* (REPOSITORY_FORMAT_INIT). Always initialize the struct using
|
|
* REPOSITORY_FORMAT_INIT before calling this function.
|
|
*/
|
|
int read_repository_format(struct repository_format *format, const char *path);
|
|
|
|
/*
|
|
* Free the memory held onto by `format`, but not the struct itself.
|
|
* (No need to use this after `read_repository_format()` fails.)
|
|
*/
|
|
void clear_repository_format(struct repository_format *format);
|
|
|
|
/*
|
|
* Verify that the repository described by repository_format is something we
|
|
* can read. If it is, return 0. Otherwise, return -1, and "err" will describe
|
|
* any errors encountered.
|
|
*/
|
|
int verify_repository_format(const struct repository_format *format,
|
|
struct strbuf *err);
|
|
|
|
/*
|
|
* Check the repository format version in the path found in get_git_dir(),
|
|
* and die if it is a version we don't understand. Generally one would
|
|
* set_git_dir() before calling this, and use it only for "are we in a valid
|
|
* repo?".
|
|
*
|
|
* If successful and fmt is not NULL, fill fmt with data.
|
|
*/
|
|
void check_repository_format(struct repository_format *fmt);
|
|
|
|
#define MTIME_CHANGED 0x0001
|
|
#define CTIME_CHANGED 0x0002
|
|
#define OWNER_CHANGED 0x0004
|
|
#define MODE_CHANGED 0x0008
|
|
#define INODE_CHANGED 0x0010
|
|
#define DATA_CHANGED 0x0020
|
|
#define TYPE_CHANGED 0x0040
|
|
|
|
/*
|
|
* Return an abbreviated sha1 unique within this repository's object database.
|
|
* The result will be at least `len` characters long, and will be NUL
|
|
* terminated.
|
|
*
|
|
* The non-`_r` version returns a static buffer which remains valid until 4
|
|
* more calls to find_unique_abbrev are made.
|
|
*
|
|
* The `_r` variant writes to a buffer supplied by the caller, which must be at
|
|
* least `GIT_MAX_HEXSZ + 1` bytes. The return value is the number of bytes
|
|
* written (excluding the NUL terminator).
|
|
*
|
|
* Note that while this version avoids the static buffer, it is not fully
|
|
* reentrant, as it calls into other non-reentrant git code.
|
|
*/
|
|
const char *repo_find_unique_abbrev(struct repository *r, const struct object_id *oid, int len);
|
|
#define find_unique_abbrev(oid, len) repo_find_unique_abbrev(the_repository, oid, len)
|
|
int repo_find_unique_abbrev_r(struct repository *r, char *hex, const struct object_id *oid, int len);
|
|
#define find_unique_abbrev_r(hex, oid, len) repo_find_unique_abbrev_r(the_repository, hex, oid, len)
|
|
|
|
/* set default permissions by passing mode arguments to open(2) */
|
|
int git_mkstemps_mode(char *pattern, int suffix_len, int mode);
|
|
int git_mkstemp_mode(char *pattern, int mode);
|
|
|
|
/*
|
|
* NOTE NOTE NOTE!!
|
|
*
|
|
* PERM_UMASK, OLD_PERM_GROUP and OLD_PERM_EVERYBODY enumerations must
|
|
* not be changed. Old repositories have core.sharedrepository written in
|
|
* numeric format, and therefore these values are preserved for compatibility
|
|
* reasons.
|
|
*/
|
|
enum sharedrepo {
|
|
PERM_UMASK = 0,
|
|
OLD_PERM_GROUP = 1,
|
|
OLD_PERM_EVERYBODY = 2,
|
|
PERM_GROUP = 0660,
|
|
PERM_EVERYBODY = 0664
|
|
};
|
|
int git_config_perm(const char *var, const char *value);
|
|
int adjust_shared_perm(const char *path);
|
|
|
|
/*
|
|
* Create the directory containing the named path, using care to be
|
|
* somewhat safe against races. Return one of the scld_error values to
|
|
* indicate success/failure. On error, set errno to describe the
|
|
* problem.
|
|
*
|
|
* SCLD_VANISHED indicates that one of the ancestor directories of the
|
|
* path existed at one point during the function call and then
|
|
* suddenly vanished, probably because another process pruned the
|
|
* directory while we were working. To be robust against this kind of
|
|
* race, callers might want to try invoking the function again when it
|
|
* returns SCLD_VANISHED.
|
|
*
|
|
* safe_create_leading_directories() temporarily changes path while it
|
|
* is working but restores it before returning.
|
|
* safe_create_leading_directories_const() doesn't modify path, even
|
|
* temporarily. Both these variants adjust the permissions of the
|
|
* created directories to honor core.sharedRepository, so they are best
|
|
* suited for files inside the git dir. For working tree files, use
|
|
* safe_create_leading_directories_no_share() instead, as it ignores
|
|
* the core.sharedRepository setting.
|
|
*/
|
|
enum scld_error {
|
|
SCLD_OK = 0,
|
|
SCLD_FAILED = -1,
|
|
SCLD_PERMS = -2,
|
|
SCLD_EXISTS = -3,
|
|
SCLD_VANISHED = -4
|
|
};
|
|
enum scld_error safe_create_leading_directories(char *path);
|
|
enum scld_error safe_create_leading_directories_const(const char *path);
|
|
enum scld_error safe_create_leading_directories_no_share(char *path);
|
|
|
|
/*
|
|
* Callback function for raceproof_create_file(). This function is
|
|
* expected to do something that makes dirname(path) permanent despite
|
|
* the fact that other processes might be cleaning up empty
|
|
* directories at the same time. Usually it will create a file named
|
|
* path, but alternatively it could create another file in that
|
|
* directory, or even chdir() into that directory. The function should
|
|
* return 0 if the action was completed successfully. On error, it
|
|
* should return a nonzero result and set errno.
|
|
* raceproof_create_file() treats two errno values specially:
|
|
*
|
|
* - ENOENT -- dirname(path) does not exist. In this case,
|
|
* raceproof_create_file() tries creating dirname(path)
|
|
* (and any parent directories, if necessary) and calls
|
|
* the function again.
|
|
*
|
|
* - EISDIR -- the file already exists and is a directory. In this
|
|
* case, raceproof_create_file() removes the directory if
|
|
* it is empty (and recursively any empty directories that
|
|
* it contains) and calls the function again.
|
|
*
|
|
* Any other errno causes raceproof_create_file() to fail with the
|
|
* callback's return value and errno.
|
|
*
|
|
* Obviously, this function should be OK with being called again if it
|
|
* fails with ENOENT or EISDIR. In other scenarios it will not be
|
|
* called again.
|
|
*/
|
|
typedef int create_file_fn(const char *path, void *cb);
|
|
|
|
/*
|
|
* Create a file in dirname(path) by calling fn, creating leading
|
|
* directories if necessary. Retry a few times in case we are racing
|
|
* with another process that is trying to clean up the directory that
|
|
* contains path. See the documentation for create_file_fn for more
|
|
* details.
|
|
*
|
|
* Return the value and set the errno that resulted from the most
|
|
* recent call of fn. fn is always called at least once, and will be
|
|
* called more than once if it returns ENOENT or EISDIR.
|
|
*/
|
|
int raceproof_create_file(const char *path, create_file_fn fn, void *cb);
|
|
|
|
int mkdir_in_gitdir(const char *path);
|
|
char *expand_user_path(const char *path, int real_home);
|
|
const char *enter_repo(const char *path, int strict);
|
|
static inline int is_absolute_path(const char *path)
|
|
{
|
|
return is_dir_sep(path[0]) || has_dos_drive_prefix(path);
|
|
}
|
|
int is_directory(const char *);
|
|
char *strbuf_realpath(struct strbuf *resolved, const char *path,
|
|
int die_on_error);
|
|
char *strbuf_realpath_forgiving(struct strbuf *resolved, const char *path,
|
|
int die_on_error);
|
|
char *real_pathdup(const char *path, int die_on_error);
|
|
const char *absolute_path(const char *path);
|
|
char *absolute_pathdup(const char *path);
|
|
const char *remove_leading_path(const char *in, const char *prefix);
|
|
const char *relative_path(const char *in, const char *prefix, struct strbuf *sb);
|
|
int normalize_path_copy_len(char *dst, const char *src, int *prefix_len);
|
|
int normalize_path_copy(char *dst, const char *src);
|
|
int longest_ancestor_length(const char *path, struct string_list *prefixes);
|
|
char *strip_path_suffix(const char *path, const char *suffix);
|
|
int daemon_avoid_alias(const char *path);
|
|
|
|
/*
|
|
* These functions match their is_hfs_dotgit() counterparts; see utf8.h for
|
|
* details.
|
|
*/
|
|
int is_ntfs_dotgit(const char *name);
|
|
int is_ntfs_dotgitmodules(const char *name);
|
|
int is_ntfs_dotgitignore(const char *name);
|
|
int is_ntfs_dotgitattributes(const char *name);
|
|
|
|
/*
|
|
* Returns true iff "str" could be confused as a command-line option when
|
|
* passed to a sub-program like "ssh". Note that this has nothing to do with
|
|
* shell-quoting, which should be handled separately; we're assuming here that
|
|
* the string makes it verbatim to the sub-program.
|
|
*/
|
|
int looks_like_command_line_option(const char *str);
|
|
|
|
/**
|
|
* Return a newly allocated string with the evaluation of
|
|
* "$XDG_CONFIG_HOME/git/$filename" if $XDG_CONFIG_HOME is non-empty, otherwise
|
|
* "$HOME/.config/git/$filename". Return NULL upon error.
|
|
*/
|
|
char *xdg_config_home(const char *filename);
|
|
|
|
/**
|
|
* Return a newly allocated string with the evaluation of
|
|
* "$XDG_CACHE_HOME/git/$filename" if $XDG_CACHE_HOME is non-empty, otherwise
|
|
* "$HOME/.cache/git/$filename". Return NULL upon error.
|
|
*/
|
|
char *xdg_cache_home(const char *filename);
|
|
|
|
int git_open_cloexec(const char *name, int flags);
|
|
#define git_open(name) git_open_cloexec(name, O_RDONLY)
|
|
int unpack_loose_header(git_zstream *stream, unsigned char *map, unsigned long mapsize, void *buffer, unsigned long bufsiz);
|
|
int parse_loose_header(const char *hdr, unsigned long *sizep);
|
|
|
|
int check_object_signature(struct repository *r, const struct object_id *oid,
|
|
void *buf, unsigned long size, const char *type);
|
|
|
|
int finalize_object_file(const char *tmpfile, const char *filename);
|
|
|
|
/* Helper to check and "touch" a file */
|
|
int check_and_freshen_file(const char *fn, int freshen);
|
|
|
|
extern const signed char hexval_table[256];
|
|
static inline unsigned int hexval(unsigned char c)
|
|
{
|
|
return hexval_table[c];
|
|
}
|
|
|
|
/*
|
|
* Convert two consecutive hexadecimal digits into a char. Return a
|
|
* negative value on error. Don't run over the end of short strings.
|
|
*/
|
|
static inline int hex2chr(const char *s)
|
|
{
|
|
unsigned int val = hexval(s[0]);
|
|
return (val & ~0xf) ? val : (val << 4) | hexval(s[1]);
|
|
}
|
|
|
|
/* Convert to/from hex/sha1 representation */
|
|
#define MINIMUM_ABBREV minimum_abbrev
|
|
#define DEFAULT_ABBREV default_abbrev
|
|
|
|
/* used when the code does not know or care what the default abbrev is */
|
|
#define FALLBACK_DEFAULT_ABBREV 7
|
|
|
|
struct object_context {
|
|
unsigned short mode;
|
|
/*
|
|
* symlink_path is only used by get_tree_entry_follow_symlinks,
|
|
* and only for symlinks that point outside the repository.
|
|
*/
|
|
struct strbuf symlink_path;
|
|
/*
|
|
* If GET_OID_RECORD_PATH is set, this will record path (if any)
|
|
* found when resolving the name. The caller is responsible for
|
|
* releasing the memory.
|
|
*/
|
|
char *path;
|
|
};
|
|
|
|
#define GET_OID_QUIETLY 01
|
|
#define GET_OID_COMMIT 02
|
|
#define GET_OID_COMMITTISH 04
|
|
#define GET_OID_TREE 010
|
|
#define GET_OID_TREEISH 020
|
|
#define GET_OID_BLOB 040
|
|
#define GET_OID_FOLLOW_SYMLINKS 0100
|
|
#define GET_OID_RECORD_PATH 0200
|
|
#define GET_OID_ONLY_TO_DIE 04000
|
|
|
|
#define GET_OID_DISAMBIGUATORS \
|
|
(GET_OID_COMMIT | GET_OID_COMMITTISH | \
|
|
GET_OID_TREE | GET_OID_TREEISH | \
|
|
GET_OID_BLOB)
|
|
|
|
enum get_oid_result {
|
|
FOUND = 0,
|
|
MISSING_OBJECT = -1, /* The requested object is missing */
|
|
SHORT_NAME_AMBIGUOUS = -2,
|
|
/* The following only apply when symlinks are followed */
|
|
DANGLING_SYMLINK = -4, /*
|
|
* The initial symlink is there, but
|
|
* (transitively) points to a missing
|
|
* in-tree file
|
|
*/
|
|
SYMLINK_LOOP = -5,
|
|
NOT_DIR = -6, /*
|
|
* Somewhere along the symlink chain, a path is
|
|
* requested which contains a file as a
|
|
* non-final element.
|
|
*/
|
|
};
|
|
|
|
int repo_get_oid(struct repository *r, const char *str, struct object_id *oid);
|
|
int get_oidf(struct object_id *oid, const char *fmt, ...);
|
|
int repo_get_oid_commit(struct repository *r, const char *str, struct object_id *oid);
|
|
int repo_get_oid_committish(struct repository *r, const char *str, struct object_id *oid);
|
|
int repo_get_oid_tree(struct repository *r, const char *str, struct object_id *oid);
|
|
int repo_get_oid_treeish(struct repository *r, const char *str, struct object_id *oid);
|
|
int repo_get_oid_blob(struct repository *r, const char *str, struct object_id *oid);
|
|
int repo_get_oid_mb(struct repository *r, const char *str, struct object_id *oid);
|
|
void maybe_die_on_misspelt_object_name(struct repository *repo,
|
|
const char *name,
|
|
const char *prefix);
|
|
enum get_oid_result get_oid_with_context(struct repository *repo, const char *str,
|
|
unsigned flags, struct object_id *oid,
|
|
struct object_context *oc);
|
|
|
|
#define get_oid(str, oid) repo_get_oid(the_repository, str, oid)
|
|
#define get_oid_commit(str, oid) repo_get_oid_commit(the_repository, str, oid)
|
|
#define get_oid_committish(str, oid) repo_get_oid_committish(the_repository, str, oid)
|
|
#define get_oid_tree(str, oid) repo_get_oid_tree(the_repository, str, oid)
|
|
#define get_oid_treeish(str, oid) repo_get_oid_treeish(the_repository, str, oid)
|
|
#define get_oid_blob(str, oid) repo_get_oid_blob(the_repository, str, oid)
|
|
#define get_oid_mb(str, oid) repo_get_oid_mb(the_repository, str, oid)
|
|
|
|
typedef int each_abbrev_fn(const struct object_id *oid, void *);
|
|
int repo_for_each_abbrev(struct repository *r, const char *prefix, each_abbrev_fn, void *);
|
|
#define for_each_abbrev(prefix, fn, data) repo_for_each_abbrev(the_repository, prefix, fn, data)
|
|
|
|
int set_disambiguate_hint_config(const char *var, const char *value);
|
|
|
|
/*
|
|
* Try to read a SHA1 in hexadecimal format from the 40 characters
|
|
* starting at hex. Write the 20-byte result to sha1 in binary form.
|
|
* Return 0 on success. Reading stops if a NUL is encountered in the
|
|
* input, so it is safe to pass this function an arbitrary
|
|
* null-terminated string.
|
|
*/
|
|
int get_sha1_hex(const char *hex, unsigned char *sha1);
|
|
int get_oid_hex(const char *hex, struct object_id *sha1);
|
|
|
|
/* Like get_oid_hex, but for an arbitrary hash algorithm. */
|
|
int get_oid_hex_algop(const char *hex, struct object_id *oid, const struct git_hash_algo *algop);
|
|
|
|
/*
|
|
* Read `len` pairs of hexadecimal digits from `hex` and write the
|
|
* values to `binary` as `len` bytes. Return 0 on success, or -1 if
|
|
* the input does not consist of hex digits).
|
|
*/
|
|
int hex_to_bytes(unsigned char *binary, const char *hex, size_t len);
|
|
|
|
/*
|
|
* Convert a binary hash in "unsigned char []" or an object name in
|
|
* "struct object_id *" to its hex equivalent. The `_r` variant is reentrant,
|
|
* and writes the NUL-terminated output to the buffer `out`, which must be at
|
|
* least `GIT_MAX_HEXSZ + 1` bytes, and returns a pointer to out for
|
|
* convenience.
|
|
*
|
|
* The non-`_r` variant returns a static buffer, but uses a ring of 4
|
|
* buffers, making it safe to make multiple calls for a single statement, like:
|
|
*
|
|
* printf("%s -> %s", hash_to_hex(one), hash_to_hex(two));
|
|
* printf("%s -> %s", oid_to_hex(one), oid_to_hex(two));
|
|
*/
|
|
char *hash_to_hex_algop_r(char *buffer, const unsigned char *hash, const struct git_hash_algo *);
|
|
char *oid_to_hex_r(char *out, const struct object_id *oid);
|
|
char *hash_to_hex_algop(const unsigned char *hash, const struct git_hash_algo *); /* static buffer result! */
|
|
char *hash_to_hex(const unsigned char *hash); /* same static buffer */
|
|
char *oid_to_hex(const struct object_id *oid); /* same static buffer */
|
|
|
|
/*
|
|
* Parse a 40-character hexadecimal object ID starting from hex, updating the
|
|
* pointer specified by end when parsing stops. The resulting object ID is
|
|
* stored in oid. Returns 0 on success. Parsing will stop on the first NUL or
|
|
* other invalid character. end is only updated on success; otherwise, it is
|
|
* unmodified.
|
|
*/
|
|
int parse_oid_hex(const char *hex, struct object_id *oid, const char **end);
|
|
|
|
/* Like parse_oid_hex, but for an arbitrary hash algorithm. */
|
|
int parse_oid_hex_algop(const char *hex, struct object_id *oid, const char **end,
|
|
const struct git_hash_algo *algo);
|
|
|
|
|
|
/*
|
|
* These functions work like get_oid_hex and parse_oid_hex, but they will parse
|
|
* a hex value for any algorithm. The algorithm is detected based on the length
|
|
* and the algorithm in use is returned. If this is not a hex object ID in any
|
|
* algorithm, returns GIT_HASH_UNKNOWN.
|
|
*/
|
|
int get_oid_hex_any(const char *hex, struct object_id *oid);
|
|
int parse_oid_hex_any(const char *hex, struct object_id *oid, const char **end);
|
|
|
|
/*
|
|
* This reads short-hand syntax that not only evaluates to a commit
|
|
* object name, but also can act as if the end user spelled the name
|
|
* of the branch from the command line.
|
|
*
|
|
* - "@{-N}" finds the name of the Nth previous branch we were on, and
|
|
* places the name of the branch in the given buf and returns the
|
|
* number of characters parsed if successful.
|
|
*
|
|
* - "<branch>@{upstream}" finds the name of the other ref that
|
|
* <branch> is configured to merge with (missing <branch> defaults
|
|
* to the current branch), and places the name of the branch in the
|
|
* given buf and returns the number of characters parsed if
|
|
* successful.
|
|
*
|
|
* If the input is not of the accepted format, it returns a negative
|
|
* number to signal an error.
|
|
*
|
|
* If the input was ok but there are not N branch switches in the
|
|
* reflog, it returns 0.
|
|
*/
|
|
#define INTERPRET_BRANCH_LOCAL (1<<0)
|
|
#define INTERPRET_BRANCH_REMOTE (1<<1)
|
|
#define INTERPRET_BRANCH_HEAD (1<<2)
|
|
struct interpret_branch_name_options {
|
|
/*
|
|
* If "allowed" is non-zero, it is a treated as a bitfield of allowable
|
|
* expansions: local branches ("refs/heads/"), remote branches
|
|
* ("refs/remotes/"), or "HEAD". If no "allowed" bits are set, any expansion is
|
|
* allowed, even ones to refs outside of those namespaces.
|
|
*/
|
|
unsigned allowed;
|
|
|
|
/*
|
|
* If ^{upstream} or ^{push} (or equivalent) is requested, and the
|
|
* branch in question does not have such a reference, return -1 instead
|
|
* of die()-ing.
|
|
*/
|
|
unsigned nonfatal_dangling_mark : 1;
|
|
};
|
|
int repo_interpret_branch_name(struct repository *r,
|
|
const char *str, int len,
|
|
struct strbuf *buf,
|
|
const struct interpret_branch_name_options *options);
|
|
#define interpret_branch_name(str, len, buf, options) \
|
|
repo_interpret_branch_name(the_repository, str, len, buf, options)
|
|
|
|
int validate_headref(const char *ref);
|
|
|
|
int base_name_compare(const char *name1, int len1, int mode1, const char *name2, int len2, int mode2);
|
|
int df_name_compare(const char *name1, int len1, int mode1, const char *name2, int len2, int mode2);
|
|
int name_compare(const char *name1, size_t len1, const char *name2, size_t len2);
|
|
int cache_name_stage_compare(const char *name1, int len1, int stage1, const char *name2, int len2, int stage2);
|
|
|
|
void *read_object_with_reference(struct repository *r,
|
|
const struct object_id *oid,
|
|
const char *required_type,
|
|
unsigned long *size,
|
|
struct object_id *oid_ret);
|
|
|
|
struct object *repo_peel_to_type(struct repository *r,
|
|
const char *name, int namelen,
|
|
struct object *o, enum object_type);
|
|
#define peel_to_type(name, namelen, obj, type) \
|
|
repo_peel_to_type(the_repository, name, namelen, obj, type)
|
|
|
|
enum date_mode_type {
|
|
DATE_NORMAL = 0,
|
|
DATE_HUMAN,
|
|
DATE_RELATIVE,
|
|
DATE_SHORT,
|
|
DATE_ISO8601,
|
|
DATE_ISO8601_STRICT,
|
|
DATE_RFC2822,
|
|
DATE_STRFTIME,
|
|
DATE_RAW,
|
|
DATE_UNIX
|
|
};
|
|
|
|
struct date_mode {
|
|
enum date_mode_type type;
|
|
const char *strftime_fmt;
|
|
int local;
|
|
};
|
|
|
|
/*
|
|
* Convenience helper for passing a constant type, like:
|
|
*
|
|
* show_date(t, tz, DATE_MODE(NORMAL));
|
|
*/
|
|
#define DATE_MODE(t) date_mode_from_type(DATE_##t)
|
|
struct date_mode *date_mode_from_type(enum date_mode_type type);
|
|
|
|
const char *show_date(timestamp_t time, int timezone, const struct date_mode *mode);
|
|
void show_date_relative(timestamp_t time, struct strbuf *timebuf);
|
|
void show_date_human(timestamp_t time, int tz, const struct timeval *now,
|
|
struct strbuf *timebuf);
|
|
int parse_date(const char *date, struct strbuf *out);
|
|
int parse_date_basic(const char *date, timestamp_t *timestamp, int *offset);
|
|
int parse_expiry_date(const char *date, timestamp_t *timestamp);
|
|
void datestamp(struct strbuf *out);
|
|
#define approxidate(s) approxidate_careful((s), NULL)
|
|
timestamp_t approxidate_careful(const char *, int *);
|
|
timestamp_t approxidate_relative(const char *date);
|
|
void parse_date_format(const char *format, struct date_mode *mode);
|
|
int date_overflows(timestamp_t date);
|
|
|
|
#define IDENT_STRICT 1
|
|
#define IDENT_NO_DATE 2
|
|
#define IDENT_NO_NAME 4
|
|
|
|
enum want_ident {
|
|
WANT_BLANK_IDENT,
|
|
WANT_AUTHOR_IDENT,
|
|
WANT_COMMITTER_IDENT
|
|
};
|
|
|
|
const char *git_author_info(int);
|
|
const char *git_committer_info(int);
|
|
const char *fmt_ident(const char *name, const char *email,
|
|
enum want_ident whose_ident,
|
|
const char *date_str, int);
|
|
const char *fmt_name(enum want_ident);
|
|
const char *ident_default_name(void);
|
|
const char *ident_default_email(void);
|
|
const char *git_editor(void);
|
|
const char *git_sequence_editor(void);
|
|
const char *git_pager(int stdout_is_tty);
|
|
int is_terminal_dumb(void);
|
|
int git_ident_config(const char *, const char *, void *);
|
|
/*
|
|
* Prepare an ident to fall back on if the user didn't configure it.
|
|
*/
|
|
void prepare_fallback_ident(const char *name, const char *email);
|
|
void reset_ident_date(void);
|
|
|
|
struct ident_split {
|
|
const char *name_begin;
|
|
const char *name_end;
|
|
const char *mail_begin;
|
|
const char *mail_end;
|
|
const char *date_begin;
|
|
const char *date_end;
|
|
const char *tz_begin;
|
|
const char *tz_end;
|
|
};
|
|
/*
|
|
* Signals an success with 0, but time part of the result may be NULL
|
|
* if the input lacks timestamp and zone
|
|
*/
|
|
int split_ident_line(struct ident_split *, const char *, int);
|
|
|
|
/*
|
|
* Like show_date, but pull the timestamp and tz parameters from
|
|
* the ident_split. It will also sanity-check the values and produce
|
|
* a well-known sentinel date if they appear bogus.
|
|
*/
|
|
const char *show_ident_date(const struct ident_split *id,
|
|
const struct date_mode *mode);
|
|
|
|
/*
|
|
* Compare split idents for equality or strict ordering. Note that we
|
|
* compare only the ident part of the line, ignoring any timestamp.
|
|
*
|
|
* Because there are two fields, we must choose one as the primary key; we
|
|
* currently arbitrarily pick the email.
|
|
*/
|
|
int ident_cmp(const struct ident_split *, const struct ident_split *);
|
|
|
|
struct checkout {
|
|
struct index_state *istate;
|
|
const char *base_dir;
|
|
int base_dir_len;
|
|
struct delayed_checkout *delayed_checkout;
|
|
struct checkout_metadata meta;
|
|
unsigned force:1,
|
|
quiet:1,
|
|
not_new:1,
|
|
clone:1,
|
|
refresh_cache:1;
|
|
};
|
|
#define CHECKOUT_INIT { NULL, "" }
|
|
|
|
#define TEMPORARY_FILENAME_LENGTH 25
|
|
int checkout_entry(struct cache_entry *ce, const struct checkout *state, char *topath, int *nr_checkouts);
|
|
void enable_delayed_checkout(struct checkout *state);
|
|
int finish_delayed_checkout(struct checkout *state, int *nr_checkouts);
|
|
/*
|
|
* Unlink the last component and schedule the leading directories for
|
|
* removal, such that empty directories get removed.
|
|
*/
|
|
void unlink_entry(const struct cache_entry *ce);
|
|
|
|
struct cache_def {
|
|
struct strbuf path;
|
|
int flags;
|
|
int track_flags;
|
|
int prefix_len_stat_func;
|
|
};
|
|
#define CACHE_DEF_INIT { STRBUF_INIT, 0, 0, 0 }
|
|
static inline void cache_def_clear(struct cache_def *cache)
|
|
{
|
|
strbuf_release(&cache->path);
|
|
}
|
|
|
|
int has_symlink_leading_path(const char *name, int len);
|
|
int threaded_has_symlink_leading_path(struct cache_def *, const char *, int);
|
|
int check_leading_path(const char *name, int len);
|
|
int has_dirs_only_path(const char *name, int len, int prefix_len);
|
|
void schedule_dir_for_removal(const char *name, int len);
|
|
void remove_scheduled_dirs(void);
|
|
|
|
struct pack_window {
|
|
struct pack_window *next;
|
|
unsigned char *base;
|
|
off_t offset;
|
|
size_t len;
|
|
unsigned int last_used;
|
|
unsigned int inuse_cnt;
|
|
};
|
|
|
|
struct pack_entry {
|
|
off_t offset;
|
|
struct packed_git *p;
|
|
};
|
|
|
|
/*
|
|
* Create a temporary file rooted in the object database directory, or
|
|
* die on failure. The filename is taken from "pattern", which should have the
|
|
* usual "XXXXXX" trailer, and the resulting filename is written into the
|
|
* "template" buffer. Returns the open descriptor.
|
|
*/
|
|
int odb_mkstemp(struct strbuf *temp_filename, const char *pattern);
|
|
|
|
/*
|
|
* Create a pack .keep file named "name" (which should generally be the output
|
|
* of odb_pack_name). Returns a file descriptor opened for writing, or -1 on
|
|
* error.
|
|
*/
|
|
int odb_pack_keep(const char *name);
|
|
|
|
/*
|
|
* Set this to 0 to prevent oid_object_info_extended() from fetching missing
|
|
* blobs. This has a difference only if extensions.partialClone is set.
|
|
*
|
|
* Its default value is 1.
|
|
*/
|
|
extern int fetch_if_missing;
|
|
|
|
/* Dumb servers support */
|
|
int update_server_info(int);
|
|
|
|
const char *get_log_output_encoding(void);
|
|
const char *get_commit_output_encoding(void);
|
|
|
|
/*
|
|
* This is a hack for test programs like test-dump-untracked-cache to
|
|
* ensure that they do not modify the untracked cache when reading it.
|
|
* Do not use it otherwise!
|
|
*/
|
|
extern int ignore_untracked_cache_config;
|
|
|
|
int committer_ident_sufficiently_given(void);
|
|
int author_ident_sufficiently_given(void);
|
|
|
|
extern const char *git_commit_encoding;
|
|
extern const char *git_log_output_encoding;
|
|
extern const char *git_mailmap_file;
|
|
extern const char *git_mailmap_blob;
|
|
|
|
/* IO helper functions */
|
|
void maybe_flush_or_die(FILE *, const char *);
|
|
__attribute__((format (printf, 2, 3)))
|
|
void fprintf_or_die(FILE *, const char *fmt, ...);
|
|
|
|
#define COPY_READ_ERROR (-2)
|
|
#define COPY_WRITE_ERROR (-3)
|
|
int copy_fd(int ifd, int ofd);
|
|
int copy_file(const char *dst, const char *src, int mode);
|
|
int copy_file_with_time(const char *dst, const char *src, int mode);
|
|
|
|
void write_or_die(int fd, const void *buf, size_t count);
|
|
void fsync_or_die(int fd, const char *);
|
|
|
|
ssize_t read_in_full(int fd, void *buf, size_t count);
|
|
ssize_t write_in_full(int fd, const void *buf, size_t count);
|
|
ssize_t pread_in_full(int fd, void *buf, size_t count, off_t offset);
|
|
|
|
static inline ssize_t write_str_in_full(int fd, const char *str)
|
|
{
|
|
return write_in_full(fd, str, strlen(str));
|
|
}
|
|
|
|
/**
|
|
* Open (and truncate) the file at path, write the contents of buf to it,
|
|
* and close it. Dies if any errors are encountered.
|
|
*/
|
|
void write_file_buf(const char *path, const char *buf, size_t len);
|
|
|
|
/**
|
|
* Like write_file_buf(), but format the contents into a buffer first.
|
|
* Additionally, write_file() will append a newline if one is not already
|
|
* present, making it convenient to write text files:
|
|
*
|
|
* write_file(path, "counter: %d", ctr);
|
|
*/
|
|
__attribute__((format (printf, 2, 3)))
|
|
void write_file(const char *path, const char *fmt, ...);
|
|
|
|
/* pager.c */
|
|
void setup_pager(void);
|
|
int pager_in_use(void);
|
|
extern int pager_use_color;
|
|
int term_columns(void);
|
|
void term_clear_line(void);
|
|
int decimal_width(uintmax_t);
|
|
int check_pager_config(const char *cmd);
|
|
void prepare_pager_args(struct child_process *, const char *pager);
|
|
|
|
extern const char *editor_program;
|
|
extern const char *askpass_program;
|
|
extern const char *excludes_file;
|
|
|
|
/* base85 */
|
|
int decode_85(char *dst, const char *line, int linelen);
|
|
void encode_85(char *buf, const unsigned char *data, int bytes);
|
|
|
|
/* pkt-line.c */
|
|
void packet_trace_identity(const char *prog);
|
|
|
|
/* add */
|
|
/*
|
|
* return 0 if success, 1 - if addition of a file failed and
|
|
* ADD_FILES_IGNORE_ERRORS was specified in flags
|
|
*/
|
|
int add_files_to_cache(const char *prefix, const struct pathspec *pathspec, int flags);
|
|
|
|
/* diff.c */
|
|
extern int diff_auto_refresh_index;
|
|
|
|
/* match-trees.c */
|
|
void shift_tree(struct repository *, const struct object_id *, const struct object_id *, struct object_id *, int);
|
|
void shift_tree_by(struct repository *, const struct object_id *, const struct object_id *, struct object_id *, const char *);
|
|
|
|
/*
|
|
* whitespace rules.
|
|
* used by both diff and apply
|
|
* last two digits are tab width
|
|
*/
|
|
#define WS_BLANK_AT_EOL 0100
|
|
#define WS_SPACE_BEFORE_TAB 0200
|
|
#define WS_INDENT_WITH_NON_TAB 0400
|
|
#define WS_CR_AT_EOL 01000
|
|
#define WS_BLANK_AT_EOF 02000
|
|
#define WS_TAB_IN_INDENT 04000
|
|
#define WS_TRAILING_SPACE (WS_BLANK_AT_EOL|WS_BLANK_AT_EOF)
|
|
#define WS_DEFAULT_RULE (WS_TRAILING_SPACE|WS_SPACE_BEFORE_TAB|8)
|
|
#define WS_TAB_WIDTH_MASK 077
|
|
/* All WS_* -- when extended, adapt diff.c emit_symbol */
|
|
#define WS_RULE_MASK 07777
|
|
extern unsigned whitespace_rule_cfg;
|
|
unsigned whitespace_rule(struct index_state *, const char *);
|
|
unsigned parse_whitespace_rule(const char *);
|
|
unsigned ws_check(const char *line, int len, unsigned ws_rule);
|
|
void ws_check_emit(const char *line, int len, unsigned ws_rule, FILE *stream, const char *set, const char *reset, const char *ws);
|
|
char *whitespace_error_string(unsigned ws);
|
|
void ws_fix_copy(struct strbuf *, const char *, int, unsigned, int *);
|
|
int ws_blank_line(const char *line, int len, unsigned ws_rule);
|
|
#define ws_tab_width(rule) ((rule) & WS_TAB_WIDTH_MASK)
|
|
|
|
/* ls-files */
|
|
void overlay_tree_on_index(struct index_state *istate,
|
|
const char *tree_name, const char *prefix);
|
|
|
|
/* setup.c */
|
|
struct startup_info {
|
|
int have_repository;
|
|
const char *prefix;
|
|
};
|
|
extern struct startup_info *startup_info;
|
|
|
|
/* merge.c */
|
|
struct commit_list;
|
|
int try_merge_command(struct repository *r,
|
|
const char *strategy, size_t xopts_nr,
|
|
const char **xopts, struct commit_list *common,
|
|
const char *head_arg, struct commit_list *remotes);
|
|
int checkout_fast_forward(struct repository *r,
|
|
const struct object_id *from,
|
|
const struct object_id *to,
|
|
int overwrite_ignore);
|
|
|
|
|
|
int sane_execvp(const char *file, char *const argv[]);
|
|
|
|
/*
|
|
* A struct to encapsulate the concept of whether a file has changed
|
|
* since we last checked it. This uses criteria similar to those used
|
|
* for the index.
|
|
*/
|
|
struct stat_validity {
|
|
struct stat_data *sd;
|
|
};
|
|
|
|
void stat_validity_clear(struct stat_validity *sv);
|
|
|
|
/*
|
|
* Returns 1 if the path is a regular file (or a symlink to a regular
|
|
* file) and matches the saved stat_validity, 0 otherwise. A missing
|
|
* or inaccessible file is considered a match if the struct was just
|
|
* initialized, or if the previous update found an inaccessible file.
|
|
*/
|
|
int stat_validity_check(struct stat_validity *sv, const char *path);
|
|
|
|
/*
|
|
* Update the stat_validity from a file opened at descriptor fd. If
|
|
* the file is missing, inaccessible, or not a regular file, then
|
|
* future calls to stat_validity_check will match iff one of those
|
|
* conditions continues to be true.
|
|
*/
|
|
void stat_validity_update(struct stat_validity *sv, int fd);
|
|
|
|
int versioncmp(const char *s1, const char *s2);
|
|
|
|
/*
|
|
* Create a directory and (if share is nonzero) adjust its permissions
|
|
* according to the shared_repository setting. Only use this for
|
|
* directories under $GIT_DIR. Don't use it for working tree
|
|
* directories.
|
|
*/
|
|
void safe_create_dir(const char *dir, int share);
|
|
|
|
/*
|
|
* Should we print an ellipsis after an abbreviated SHA-1 value
|
|
* when doing diff-raw output or indicating a detached HEAD?
|
|
*/
|
|
int print_sha1_ellipsis(void);
|
|
|
|
/* Return 1 if the file is empty or does not exists, 0 otherwise. */
|
|
int is_empty_or_missing_file(const char *filename);
|
|
|
|
#endif /* CACHE_H */
|