git/git-am.sh
Jiang Xin c7108bf9ed i18n: rebase: mark messages for translation
Mark messages in git-rebase.sh for translation.  While doing this
Jonathan noticed that the comma usage and sentence structure of the
resolvemsg was not quite right, so correct that and its cousins in
git-am.sh and t/t0201-gettext-fallbacks.sh at the same time.

Some tests would start to fail with GETTEXT_POISON turned on after
this update.  Use test_i18ncmp and test_i18ngrep where appropriate
to mark strings that should only be checked in the C locale output
to avoid such issues.

Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-07-25 10:09:14 -07:00

908 lines
22 KiB
Bash
Executable File

#!/bin/sh
#
# Copyright (c) 2005, 2006 Junio C Hamano
SUBDIRECTORY_OK=Yes
OPTIONS_KEEPDASHDASH=
OPTIONS_SPEC="\
git am [options] [(<mbox>|<Maildir>)...]
git am [options] (--resolved | --skip | --abort)
--
i,interactive run interactively
b,binary* (historical option -- no-op)
3,3way allow fall back on 3way merging if needed
q,quiet be quiet
s,signoff add a Signed-off-by line to the commit message
u,utf8 recode into utf8 (default)
k,keep pass -k flag to git-mailinfo
keep-non-patch pass -b flag to git-mailinfo
keep-cr pass --keep-cr flag to git-mailsplit for mbox format
no-keep-cr do not pass --keep-cr flag to git-mailsplit independent of am.keepcr
c,scissors strip everything before a scissors line
whitespace= pass it through git-apply
ignore-space-change pass it through git-apply
ignore-whitespace pass it through git-apply
directory= pass it through git-apply
exclude= pass it through git-apply
include= pass it through git-apply
C= pass it through git-apply
p= pass it through git-apply
patch-format= format the patch(es) are in
reject pass it through git-apply
resolvemsg= override error message when patch failure occurs
continue continue applying patches after resolving a conflict
r,resolved synonyms for --continue
skip skip the current patch
abort restore the original branch and abort the patching operation.
committer-date-is-author-date lie about committer date
ignore-date use current timestamp for author date
rerere-autoupdate update the index with reused conflict resolution if possible
rebasing* (internal use for git-rebase)"
. git-sh-setup
. git-sh-i18n
prefix=$(git rev-parse --show-prefix)
set_reflog_action am
require_work_tree
cd_to_toplevel
git var GIT_COMMITTER_IDENT >/dev/null ||
die "$(gettext "You need to set your committer info first")"
if git rev-parse --verify -q HEAD >/dev/null
then
HAS_HEAD=yes
else
HAS_HEAD=
fi
cmdline="git am"
if test '' != "$interactive"
then
cmdline="$cmdline -i"
fi
if test '' != "$threeway"
then
cmdline="$cmdline -3"
fi
sq () {
git rev-parse --sq-quote "$@"
}
stop_here () {
echo "$1" >"$dotest/next"
git rev-parse --verify -q HEAD >"$dotest/abort-safety"
exit 1
}
safe_to_abort () {
if test -f "$dotest/dirtyindex"
then
return 1
fi
if ! test -s "$dotest/abort-safety"
then
return 0
fi
abort_safety=$(cat "$dotest/abort-safety")
if test "z$(git rev-parse --verify -q HEAD)" = "z$abort_safety"
then
return 0
fi
gettextln "You seem to have moved HEAD since the last 'am' failure.
Not rewinding to ORIG_HEAD" >&2
return 1
}
stop_here_user_resolve () {
if [ -n "$resolvemsg" ]; then
printf '%s\n' "$resolvemsg"
stop_here $1
fi
eval_gettextln "When you have resolved this problem, run \"\$cmdline --resolved\".
If you prefer to skip this patch, run \"\$cmdline --skip\" instead.
To restore the original branch and stop patching, run \"\$cmdline --abort\"."
stop_here $1
}
go_next () {
rm -f "$dotest/$msgnum" "$dotest/msg" "$dotest/msg-clean" \
"$dotest/patch" "$dotest/info"
echo "$next" >"$dotest/next"
this=$next
}
cannot_fallback () {
echo "$1"
gettextln "Cannot fall back to three-way merge."
exit 1
}
fall_back_3way () {
O_OBJECT=`cd "$GIT_OBJECT_DIRECTORY" && pwd`
rm -fr "$dotest"/patch-merge-*
mkdir "$dotest/patch-merge-tmp-dir"
# First see if the patch records the index info that we can use.
cmd="git apply $git_apply_opt --build-fake-ancestor" &&
cmd="$cmd "'"$dotest/patch-merge-tmp-index" "$dotest/patch"' &&
eval "$cmd" &&
GIT_INDEX_FILE="$dotest/patch-merge-tmp-index" \
git write-tree >"$dotest/patch-merge-base+" ||
cannot_fallback "$(gettext "Repository lacks necessary blobs to fall back on 3-way merge.")"
say Using index info to reconstruct a base tree...
cmd='GIT_INDEX_FILE="$dotest/patch-merge-tmp-index"'
if test -z "$GIT_QUIET"
then
eval "$cmd git diff-index --cached --diff-filter=AM --name-status HEAD"
fi
cmd="$cmd git apply --cached $git_apply_opt"' <"$dotest/patch"'
if eval "$cmd"
then
mv "$dotest/patch-merge-base+" "$dotest/patch-merge-base"
mv "$dotest/patch-merge-tmp-index" "$dotest/patch-merge-index"
else
cannot_fallback "$(gettext "Did you hand edit your patch?
It does not apply to blobs recorded in its index.")"
fi
test -f "$dotest/patch-merge-index" &&
his_tree=$(GIT_INDEX_FILE="$dotest/patch-merge-index" git write-tree) &&
orig_tree=$(cat "$dotest/patch-merge-base") &&
rm -fr "$dotest"/patch-merge-* || exit 1
say "$(gettext "Falling back to patching base and 3-way merge...")"
# This is not so wrong. Depending on which base we picked,
# orig_tree may be wildly different from ours, but his_tree
# has the same set of wildly different changes in parts the
# patch did not touch, so recursive ends up canceling them,
# saying that we reverted all those changes.
eval GITHEAD_$his_tree='"$FIRSTLINE"'
export GITHEAD_$his_tree
if test -n "$GIT_QUIET"
then
GIT_MERGE_VERBOSITY=0 && export GIT_MERGE_VERBOSITY
fi
git-merge-recursive $orig_tree -- HEAD $his_tree || {
git rerere $allow_rerere_autoupdate
echo Failed to merge in the changes.
exit 1
}
unset GITHEAD_$his_tree
}
clean_abort () {
test $# = 0 || echo >&2 "$@"
rm -fr "$dotest"
exit 1
}
patch_format=
check_patch_format () {
# early return if patch_format was set from the command line
if test -n "$patch_format"
then
return 0
fi
# we default to mbox format if input is from stdin and for
# directories
if test $# = 0 || test "x$1" = "x-" || test -d "$1"
then
patch_format=mbox
return 0
fi
# otherwise, check the first few non-blank lines of the first
# patch to try to detect its format
{
# Start from first line containing non-whitespace
l1=
while test -z "$l1"
do
read l1 || break
done
read l2
read l3
case "$l1" in
"From "* | "From: "*)
patch_format=mbox
;;
'# This series applies on GIT commit'*)
patch_format=stgit-series
;;
"# HG changeset patch")
patch_format=hg
;;
*)
# if the second line is empty and the third is
# a From, Author or Date entry, this is very
# likely an StGIT patch
case "$l2,$l3" in
,"From: "* | ,"Author: "* | ,"Date: "*)
patch_format=stgit
;;
*)
;;
esac
;;
esac
if test -z "$patch_format" &&
test -n "$l1" &&
test -n "$l2" &&
test -n "$l3"
then
# This begins with three non-empty lines. Is this a
# piece of e-mail a-la RFC2822? Grab all the headers,
# discarding the indented remainder of folded lines,
# and see if it looks like that they all begin with the
# header field names...
tr -d '\015' <"$1" |
sed -n -e '/^$/q' -e '/^[ ]/d' -e p |
sane_egrep -v '^[!-9;-~]+:' >/dev/null ||
patch_format=mbox
fi
} < "$1" || clean_abort
}
split_patches () {
case "$patch_format" in
mbox)
if test t = "$keepcr"
then
keep_cr=--keep-cr
else
keep_cr=
fi
git mailsplit -d"$prec" -o"$dotest" -b $keep_cr -- "$@" > "$dotest/last" ||
clean_abort
;;
stgit-series)
if test $# -ne 1
then
clean_abort "$(gettext "Only one StGIT patch series can be applied at once")"
fi
series_dir=`dirname "$1"`
series_file="$1"
shift
{
set x
while read filename
do
set "$@" "$series_dir/$filename"
done
# remove the safety x
shift
# remove the arg coming from the first-line comment
shift
} < "$series_file" || clean_abort
# set the patch format appropriately
patch_format=stgit
# now handle the actual StGIT patches
split_patches "$@"
;;
stgit)
this=0
for stgit in "$@"
do
this=`expr "$this" + 1`
msgnum=`printf "%0${prec}d" $this`
# Perl version of StGIT parse_patch. The first nonemptyline
# not starting with Author, From or Date is the
# subject, and the body starts with the next nonempty
# line not starting with Author, From or Date
perl -ne 'BEGIN { $subject = 0 }
if ($subject > 1) { print ; }
elsif (/^\s+$/) { next ; }
elsif (/^Author:/) { s/Author/From/ ; print ;}
elsif (/^(From|Date)/) { print ; }
elsif ($subject) {
$subject = 2 ;
print "\n" ;
print ;
} else {
print "Subject: ", $_ ;
$subject = 1;
}
' < "$stgit" > "$dotest/$msgnum" || clean_abort
done
echo "$this" > "$dotest/last"
this=
msgnum=
;;
hg)
this=0
for hg in "$@"
do
this=$(( $this + 1 ))
msgnum=$(printf "%0${prec}d" $this)
# hg stores changeset metadata in #-commented lines preceding
# the commit message and diff(s). The only metadata we care about
# are the User and Date (Node ID and Parent are hashes which are
# only relevant to the hg repository and thus not useful to us)
# Since we cannot guarantee that the commit message is in
# git-friendly format, we put no Subject: line and just consume
# all of the message as the body
perl -M'POSIX qw(strftime)' -ne 'BEGIN { $subject = 0 }
if ($subject) { print ; }
elsif (/^\# User /) { s/\# User/From:/ ; print ; }
elsif (/^\# Date /) {
my ($hashsign, $str, $time, $tz) = split ;
$tz = sprintf "%+05d", (0-$tz)/36;
print "Date: " .
strftime("%a, %d %b %Y %H:%M:%S ",
localtime($time))
. "$tz\n";
} elsif (/^\# /) { next ; }
else {
print "\n", $_ ;
$subject = 1;
}
' <"$hg" >"$dotest/$msgnum" || clean_abort
done
echo "$this" >"$dotest/last"
this=
msgnum=
;;
*)
if test -n "$patch_format"
then
clean_abort "$(eval_gettext "Patch format \$patch_format is not supported.")"
else
clean_abort "$(gettext "Patch format detection failed.")"
fi
;;
esac
}
prec=4
dotest="$GIT_DIR/rebase-apply"
sign= utf8=t keep= keepcr= skip= interactive= resolved= rebasing= abort=
resolvemsg= resume= scissors= no_inbody_headers=
git_apply_opt=
committer_date_is_author_date=
ignore_date=
allow_rerere_autoupdate=
if test "$(git config --bool --get am.keepcr)" = true
then
keepcr=t
fi
while test $# != 0
do
case "$1" in
-i|--interactive)
interactive=t ;;
-b|--binary)
echo >&2 "The $1 option has been a no-op for long time, and"
echo >&2 "it will be removed. Please do not use it anymore."
;;
-3|--3way)
threeway=t ;;
-s|--signoff)
sign=t ;;
-u|--utf8)
utf8=t ;; # this is now default
--no-utf8)
utf8= ;;
-k|--keep)
keep=t ;;
--keep-non-patch)
keep=b ;;
-c|--scissors)
scissors=t ;;
--no-scissors)
scissors=f ;;
-r|--resolved|--continue)
resolved=t ;;
--skip)
skip=t ;;
--abort)
abort=t ;;
--rebasing)
rebasing=t threeway=t ;;
-d|--dotest)
die "$(gettext "-d option is no longer supported. Do not use.")"
;;
--resolvemsg)
shift; resolvemsg=$1 ;;
--whitespace|--directory|--exclude|--include)
git_apply_opt="$git_apply_opt $(sq "$1=$2")"; shift ;;
-C|-p)
git_apply_opt="$git_apply_opt $(sq "$1$2")"; shift ;;
--patch-format)
shift ; patch_format="$1" ;;
--reject|--ignore-whitespace|--ignore-space-change)
git_apply_opt="$git_apply_opt $1" ;;
--committer-date-is-author-date)
committer_date_is_author_date=t ;;
--ignore-date)
ignore_date=t ;;
--rerere-autoupdate|--no-rerere-autoupdate)
allow_rerere_autoupdate="$1" ;;
-q|--quiet)
GIT_QUIET=t ;;
--keep-cr)
keepcr=t ;;
--no-keep-cr)
keepcr=f ;;
--)
shift; break ;;
*)
usage ;;
esac
shift
done
# If the dotest directory exists, but we have finished applying all the
# patches in them, clear it out.
if test -d "$dotest" &&
last=$(cat "$dotest/last") &&
next=$(cat "$dotest/next") &&
test $# != 0 &&
test "$next" -gt "$last"
then
rm -fr "$dotest"
fi
if test -d "$dotest"
then
case "$#,$skip$resolved$abort" in
0,*t*)
# Explicit resume command and we do not have file, so
# we are happy.
: ;;
0,)
# No file input but without resume parameters; catch
# user error to feed us a patch from standard input
# when there is already $dotest. This is somewhat
# unreliable -- stdin could be /dev/null for example
# and the caller did not intend to feed us a patch but
# wanted to continue unattended.
test -t 0
;;
*)
false
;;
esac ||
die "$(eval_gettext "previous rebase directory \$dotest still exists but mbox given.")"
resume=yes
case "$skip,$abort" in
t,t)
die "$(gettext "Please make up your mind. --skip or --abort?")"
;;
t,)
git rerere clear
git read-tree --reset -u HEAD HEAD
orig_head=$(cat "$GIT_DIR/ORIG_HEAD")
git reset HEAD
git update-ref ORIG_HEAD $orig_head
;;
,t)
if test -f "$dotest/rebasing"
then
exec git rebase --abort
fi
git rerere clear
if safe_to_abort
then
git read-tree --reset -u HEAD ORIG_HEAD
git reset ORIG_HEAD
fi
rm -fr "$dotest"
exit ;;
esac
rm -f "$dotest/dirtyindex"
else
# Make sure we are not given --skip, --resolved, nor --abort
test "$skip$resolved$abort" = "" ||
die "$(gettext "Resolve operation not in progress, we are not resuming.")"
# Start afresh.
mkdir -p "$dotest" || exit
if test -n "$prefix" && test $# != 0
then
first=t
for arg
do
test -n "$first" && {
set x
first=
}
if is_absolute_path "$arg"
then
set "$@" "$arg"
else
set "$@" "$prefix$arg"
fi
done
shift
fi
check_patch_format "$@"
split_patches "$@"
# -i can and must be given when resuming; everything
# else is kept
echo " $git_apply_opt" >"$dotest/apply-opt"
echo "$threeway" >"$dotest/threeway"
echo "$sign" >"$dotest/sign"
echo "$utf8" >"$dotest/utf8"
echo "$keep" >"$dotest/keep"
echo "$scissors" >"$dotest/scissors"
echo "$no_inbody_headers" >"$dotest/no_inbody_headers"
echo "$GIT_QUIET" >"$dotest/quiet"
echo 1 >"$dotest/next"
if test -n "$rebasing"
then
: >"$dotest/rebasing"
else
: >"$dotest/applying"
if test -n "$HAS_HEAD"
then
git update-ref ORIG_HEAD HEAD
else
git update-ref -d ORIG_HEAD >/dev/null 2>&1
fi
fi
fi
git update-index -q --refresh
case "$resolved" in
'')
case "$HAS_HEAD" in
'')
files=$(git ls-files) ;;
?*)
files=$(git diff-index --cached --name-only HEAD --) ;;
esac || exit
if test "$files"
then
test -n "$HAS_HEAD" && : >"$dotest/dirtyindex"
die "$(eval_gettext "Dirty index: cannot apply patches (dirty: \$files)")"
fi
esac
# Now, decide what command line options we will give to the git
# commands we invoke, based on the result of parsing command line
# options and previous invocation state stored in $dotest/ files.
if test "$(cat "$dotest/utf8")" = t
then
utf8=-u
else
utf8=-n
fi
keep=$(cat "$dotest/keep")
case "$keep" in
t)
keep=-k ;;
b)
keep=-b ;;
*)
keep= ;;
esac
case "$(cat "$dotest/scissors")" in
t)
scissors=--scissors ;;
f)
scissors=--no-scissors ;;
esac
if test "$(cat "$dotest/no_inbody_headers")" = t
then
no_inbody_headers=--no-inbody-headers
else
no_inbody_headers=
fi
if test "$(cat "$dotest/quiet")" = t
then
GIT_QUIET=t
fi
if test "$(cat "$dotest/threeway")" = t
then
threeway=t
fi
git_apply_opt=$(cat "$dotest/apply-opt")
if test "$(cat "$dotest/sign")" = t
then
SIGNOFF=`git var GIT_COMMITTER_IDENT | sed -e '
s/>.*/>/
s/^/Signed-off-by: /'
`
else
SIGNOFF=
fi
last=`cat "$dotest/last"`
this=`cat "$dotest/next"`
if test "$skip" = t
then
this=`expr "$this" + 1`
resume=
fi
while test "$this" -le "$last"
do
msgnum=`printf "%0${prec}d" $this`
next=`expr "$this" + 1`
test -f "$dotest/$msgnum" || {
resume=
go_next
continue
}
# If we are not resuming, parse and extract the patch information
# into separate files:
# - info records the authorship and title
# - msg is the rest of commit log message
# - patch is the patch body.
#
# When we are resuming, these files are either already prepared
# by the user, or the user can tell us to do so by --resolved flag.
case "$resume" in
'')
if test -f "$dotest/rebasing"
then
commit=$(sed -e 's/^From \([0-9a-f]*\) .*/\1/' \
-e q "$dotest/$msgnum") &&
test "$(git cat-file -t "$commit")" = commit ||
stop_here $this
git cat-file commit "$commit" |
sed -e '1,/^$/d' >"$dotest/msg-clean"
echo "$commit" >"$dotest/original-commit"
get_author_ident_from_commit "$commit" >"$dotest/author-script"
git diff-tree --root --binary "$commit" >"$dotest/patch"
else
git mailinfo $keep $no_inbody_headers $scissors $utf8 "$dotest/msg" "$dotest/patch" \
<"$dotest/$msgnum" >"$dotest/info" ||
stop_here $this
# skip pine's internal folder data
sane_grep '^Author: Mail System Internal Data$' \
<"$dotest"/info >/dev/null &&
go_next && continue
test -s "$dotest/patch" || {
eval_gettextln "Patch is empty. Was it split wrong?
If you would prefer to skip this patch, instead run \"\$cmdline --skip\".
To restore the original branch and stop patching run \"\$cmdline --abort\"."
stop_here $this
}
rm -f "$dotest/original-commit" "$dotest/author-script"
{
sed -n '/^Subject/ s/Subject: //p' "$dotest/info"
echo
cat "$dotest/msg"
} |
git stripspace > "$dotest/msg-clean"
fi
;;
esac
if test -f "$dotest/author-script"
then
eval $(cat "$dotest/author-script")
else
GIT_AUTHOR_NAME="$(sed -n '/^Author/ s/Author: //p' "$dotest/info")"
GIT_AUTHOR_EMAIL="$(sed -n '/^Email/ s/Email: //p' "$dotest/info")"
GIT_AUTHOR_DATE="$(sed -n '/^Date/ s/Date: //p' "$dotest/info")"
fi
if test -z "$GIT_AUTHOR_EMAIL"
then
gettextln "Patch does not have a valid e-mail address."
stop_here $this
fi
export GIT_AUTHOR_NAME GIT_AUTHOR_EMAIL GIT_AUTHOR_DATE
case "$resume" in
'')
if test '' != "$SIGNOFF"
then
LAST_SIGNED_OFF_BY=`
sed -ne '/^Signed-off-by: /p' \
"$dotest/msg-clean" |
sed -ne '$p'
`
ADD_SIGNOFF=`
test "$LAST_SIGNED_OFF_BY" = "$SIGNOFF" || {
test '' = "$LAST_SIGNED_OFF_BY" && echo
echo "$SIGNOFF"
}`
else
ADD_SIGNOFF=
fi
{
if test -s "$dotest/msg-clean"
then
cat "$dotest/msg-clean"
fi
if test '' != "$ADD_SIGNOFF"
then
echo "$ADD_SIGNOFF"
fi
} >"$dotest/final-commit"
;;
*)
case "$resolved$interactive" in
tt)
# This is used only for interactive view option.
git diff-index -p --cached HEAD -- >"$dotest/patch"
;;
esac
esac
resume=
if test "$interactive" = t
then
test -t 0 ||
die "$(gettext "cannot be interactive without stdin connected to a terminal.")"
action=again
while test "$action" = again
do
gettextln "Commit Body is:"
echo "--------------------------"
cat "$dotest/final-commit"
echo "--------------------------"
# TRANSLATORS: Make sure to include [y], [n], [e], [v] and [a]
# in your translation. The program will only accept English
# input at this point.
gettext "Apply? [y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all "
read reply
case "$reply" in
[yY]*) action=yes ;;
[aA]*) action=yes interactive= ;;
[nN]*) action=skip ;;
[eE]*) git_editor "$dotest/final-commit"
action=again ;;
[vV]*) action=again
git_pager "$dotest/patch" ;;
*) action=again ;;
esac
done
else
action=yes
fi
if test -f "$dotest/final-commit"
then
FIRSTLINE=$(sed 1q "$dotest/final-commit")
else
FIRSTLINE=""
fi
if test $action = skip
then
go_next
continue
fi
if test -x "$GIT_DIR"/hooks/applypatch-msg
then
"$GIT_DIR"/hooks/applypatch-msg "$dotest/final-commit" ||
stop_here $this
fi
say "$(eval_gettext "Applying: \$FIRSTLINE")"
case "$resolved" in
'')
# When we are allowed to fall back to 3-way later, don't give
# false errors during the initial attempt.
squelch=
if test "$threeway" = t
then
squelch='>/dev/null 2>&1 '
fi
eval "git apply $squelch$git_apply_opt"' --index "$dotest/patch"'
apply_status=$?
;;
t)
# Resolved means the user did all the hard work, and
# we do not have to do any patch application. Just
# trust what the user has in the index file and the
# working tree.
resolved=
git diff-index --quiet --cached HEAD -- && {
gettextln "No changes - did you forget to use 'git add'?
If there is nothing left to stage, chances are that something else
already introduced the same changes; you might want to skip this patch."
stop_here_user_resolve $this
}
unmerged=$(git ls-files -u)
if test -n "$unmerged"
then
gettextln "You still have unmerged paths in your index
did you forget to use 'git add'?"
stop_here_user_resolve $this
fi
apply_status=0
git rerere
;;
esac
if test $apply_status != 0 && test "$threeway" = t
then
if (fall_back_3way)
then
# Applying the patch to an earlier tree and merging the
# result may have produced the same tree as ours.
git diff-index --quiet --cached HEAD -- && {
say "$(gettext "No changes -- Patch already applied.")"
go_next
continue
}
# clear apply_status -- we have successfully merged.
apply_status=0
fi
fi
if test $apply_status != 0
then
eval_gettextln 'Patch failed at $msgnum $FIRSTLINE'
stop_here_user_resolve $this
fi
if test -x "$GIT_DIR"/hooks/pre-applypatch
then
"$GIT_DIR"/hooks/pre-applypatch || stop_here $this
fi
tree=$(git write-tree) &&
commit=$(
if test -n "$ignore_date"
then
GIT_AUTHOR_DATE=
fi
parent=$(git rev-parse --verify -q HEAD) ||
say >&2 "$(gettext "applying to an empty history")"
if test -n "$committer_date_is_author_date"
then
GIT_COMMITTER_DATE="$GIT_AUTHOR_DATE"
export GIT_COMMITTER_DATE
fi &&
git commit-tree $tree ${parent:+-p} $parent <"$dotest/final-commit"
) &&
git update-ref -m "$GIT_REFLOG_ACTION: $FIRSTLINE" HEAD $commit $parent ||
stop_here $this
if test -f "$dotest/original-commit"; then
echo "$(cat "$dotest/original-commit") $commit" >> "$dotest/rewritten"
fi
if test -x "$GIT_DIR"/hooks/post-applypatch
then
"$GIT_DIR"/hooks/post-applypatch
fi
go_next
done
if test -s "$dotest"/rewritten; then
git notes copy --for-rewrite=rebase < "$dotest"/rewritten
if test -x "$GIT_DIR"/hooks/post-rewrite; then
"$GIT_DIR"/hooks/post-rewrite rebase < "$dotest"/rewritten
fi
fi
rm -fr "$dotest"
git gc --auto