"sparse-checkout" UI improvements.
* en/sparse-checkout:
sparse-checkout: provide a new reapply subcommand
unpack-trees: failure to set SKIP_WORKTREE bits always just a warning
unpack-trees: provide warnings on sparse updates for unmerged paths too
unpack-trees: make sparse path messages sound like warnings
unpack-trees: split display_error_msgs() into two
unpack-trees: rename ERROR_* fields meant for warnings to WARNING_*
unpack-trees: move ERROR_WOULD_LOSE_SUBMODULE earlier
sparse-checkout: use improved unpack_trees porcelain messages
sparse-checkout: use new update_sparsity() function
unpack-trees: add a new update_sparsity() function
unpack-trees: pull sparse-checkout pattern reading into a new function
unpack-trees: do not mark a dirty path with SKIP_WORKTREE
unpack-trees: allow check_updates() to work on a different index
t1091: make some tests a little more defensive against failures
unpack-trees: simplify pattern_list freeing
unpack-trees: simplify verify_absent_sparse()
unpack-trees: remove unused error type
unpack-trees: fix minor typo in comment
When sparse-checkout runs to update the list of sparsity patterns, it
gives warnings if it can't remove paths from the working tree because
those files have dirty changes. Add a similar warning for unmerged
paths as well.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
display_error_msgs() is never called to show messages of both ERROR_*
and WARNING_* types at the same time; it is instead called multiple
times, separately for each type. Since we want to display these types
differently, make two slightly different versions of this function.
A subsequent commit will further modify unpack_trees() and how it calls
the new display_warning_msgs().
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to treat issues with setting the SKIP_WORKTREE bit as a warning
rather than an error; rename the enum values to reflect this intent as
a simple step towards that goal.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A minor change, but we want to convert the sparse messages to warnings
and this allows us to group warnings and errors.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the only way to update the SKIP_WORKTREE bits for various
paths was invoking `git read-tree -mu HEAD` or calling the same code
that this codepath invoked. This however had a number of problems if
the index or working directory were not clean. First, let's consider
the case:
Flipping SKIP_WORKTREE -> !SKIP_WORKTREE (materializing files)
If the working tree was clean this was fine, but if there were files or
directories or symlinks or whatever already present at the given path
then the operation would abort with an error. Let's label this case
for later discussion:
A) There is an untracked path in the way
Now let's consider the opposite case:
Flipping !SKIP_WORKTREE -> SKIP_WORKTREE (removing files)
If the index and working tree was clean this was fine, but if there were
any unclean paths we would run into problems. There are three different
cases to consider:
B) The path is unmerged
C) The path has unstaged changes
D) The path has staged changes (differs from HEAD)
If any path fell into case B or C, then the whole operation would be
aborted with an error. With sparse-checkout, the whole operation would
be aborted for case D as well, but for its predecessor of using `git
read-tree -mu HEAD` directly, any paths that fell into case D would be
removed from the working copy and the index entry for that path would be
reset to match HEAD -- which looks and feels like data loss to users
(only a few are even aware to ask whether it can be recovered, and even
then it requires walking through loose objects trying to match up the
right ones).
Refusing to remove files that have unsaved user changes is good, but
refusing to work on any other paths is very problematic for users. If
the user is in the middle of a rebase or has made modifications to files
that bring in more dependencies, then for their build to work they need
to update the sparse paths. This logic has been preventing them from
doing so. Sometimes in response, the user will stage the files and
re-try, to no avail with sparse-checkout or to the horror of losing
their changes if they are using its predecessor of `git read-tree -mu
HEAD`.
Add a new update_sparsity() function which will not error out in any of
these cases but behaves as follows for the special cases:
A) Leave the file in the working copy alone, clear the SKIP_WORKTREE
bit, and print a warning (thus leaving the path in a state where
status will report the file as modified, which seems logical).
B) Do NOT mark this path as SKIP_WORKTREE, and leave it as unmerged.
C) Do NOT mark this path as SKIP_WORKTREE and print a warning about
the dirty path.
D) Mark the path as SKIP_WORKTREE, but do not revert the version
stored in the index to match HEAD; leave the contents alone.
I tried a different behavior for A (leave the SKIP_WORKTREE bit set),
but found it very surprising and counter-intuitive (e.g. the user sees
it is present along with all the other files in that directory, tries to
stage it, but git add ignores it since the SKIP_WORKTREE bit is set). A
& C seem like optimal behavior to me. B may be as well, though I wonder
if printing a warning would be an improvement. Some might be slightly
surprised by D at first, but given that it does the right thing with
`git commit` and even `git commit -a` (`git add` ignores entries that
are marked SKIP_WORKTREE and thus doesn't delete them, and `commit -a`
is similar), it seems logical to me.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit e091228e17 ("sparse-checkout: update working directory
in-process", 2019-11-21) allowed passing a pre-defined set of patterns
to unpack_trees(). However, if o->pl was NULL, it would still read the
existing patterns and use those. If those patterns were read into a
data structure that was allocated, naturally they needed to be free'd.
However, despite the same function being responsible for knowing about
both the allocation and the free'ing, the logic for tracking whether to
free the pattern_list was hoisted to an outer function with an
additional flag in unpack_trees_options. Put the logic back in the
relevant function and discard the now unnecessary flag.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit 08402b0409 ("merge-recursive: distinguish "removed" and
"overwritten" messages", 2010-08-11) split
ERROR_WOULD_LOSE_UNTRACKED
into both
ERROR_WOULD_LOSE_UNTRACKED_OVERWRITTEN
ERROR_WOULD_LOSE_UNTRACKED_REMOVED
and also split
ERROR_WOULD_LOSE_ORPHANED
into both
ERROR_WOULD_LOSE_ORPHANED_OVERWRITTEN
ERROR_WOULD_LOSE_ORPHANED_REMOVED
However, despite the split only three of these four types were used.
ERROR_WOULD_LOSE_ORPHANED_REMOVED was not put into use when it was
introduced and nothing else has used it in the intervening decade
either. Remove it.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide commit metadata for checkout code paths that use unpack_trees
and friends. When we're checking out a commit, use the commit
information, but don't provide commit information if we're checking out
from the index, since there need not be any particular commit associated
with the index, and even if there is one, we can't know what it is.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unpack-trees API depends on the tree-walk API. But we've recently
introduced a dependency in tree-walk.c on MAX_UNPACK_TREES, which
doesn't otherwise care about unpack-trees at all.
Let's break that dependency by reversing the constants: we'll introduce
a new MAX_TRAVERSE_TREES which belongs to the tree-walk API. And then we
can define MAX_UNPACK_TREES in terms of that (since unpack-trees cannot
possibly work with more trees than it can traverse at once via
tree-walk).
The value for both will remain at 8. This is somewhat arbitrary and
probably more than is necessary, per ca885a4fe6 (read-tree() and
unpack_trees(): use consistent limit, 2008-03-13), but there's not
really any pressing need to reduce it.
Suggested-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-checkout builtin used 'git read-tree -mu HEAD' to update the
skip-worktree bits in the index and to update the working directory.
This extra process is overly complex, and prone to failure. It also
requires that we write our changes to the sparse-checkout file before
trying to update the index.
Remove this extra process call by creating a direct call to
unpack_trees() in the same way 'git read-tree -mu HEAD' does. In
addition, provide an in-memory list of patterns so we can avoid
reading from the sparse-checkout file. This allows us to test a
proposed change to the file before writing to it.
An earlier version of this patch included a bug when the 'set' command
failed due to the "Sparse checkout leaves no entry on working directory"
error. It would not rollback the index.lock file, so the replay of the
old sparse-checkout specification would fail. A test in t1091 now
covers that scenario.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first consumer of pattern-matching filenames was the
.gitignore feature. In that context, storing a list of patterns
as a 'struct exclude_list' makes sense. However, the
sparse-checkout feature then adopted these structures and methods,
but with the opposite meaning: these patterns match the files
that should be included!
It would be clearer to rename this entire library as a "pattern
matching" library, and the callers apply exclusion/inclusion
logic accordingly based on their needs.
This commit renames 'struct exclude_list' to 'struct pattern_list'
and renames several variables called 'el' to 'pl'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gently flag was added in 17e4642667 (Add flag to make unpack_trees()
not print errors. - 2008-02-07) to suppress error messages. The name
"gently" does not quite express that. Granted, being quiet is gentle but
it could mean not performing some other actions. Rename the flag to
"quiet" to be more on point.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "git clone" against a project that contain two files with
pathnames that differ only in cases on a case insensitive
filesystem would result in one of the files lost because the
underlying filesystem is incapable of holding both at the same
time. An attempt is made to detect such a case and warn.
* nd/clone-case-smashing-warning:
clone: report duplicate entries on case-insensitive filesystems
Code hygiene improvement for the header files.
* en/incl-forward-decl:
Remove forward declaration of an enum
compat/precompose_utf8.h: use more common include guard style
urlmatch.h: fix include guard
Move definition of enum branch_track from cache.h to branch.h
alloc: make allocate_alloc_state and clear_alloc_state more consistent
Add missing includes and forward declarations
Paths that only differ in case work fine in a case-sensitive
filesystems, but if those repos are cloned in a case-insensitive one,
you'll get problems. The first thing to notice is "git status" will
never be clean with no indication what exactly is "dirty".
This patch helps the situation a bit by pointing out the problem at
clone time. Even though this patch talks about case sensitivity, the
patch makes no assumption about folding rules by the filesystem. It
simply observes that if an entry has been already checked out at clone
time when we're about to write a new path, some folding rules are
behind this.
In the case that we can't rely on filesystem (via inode number) to do
this check, fall back to fspathcmp() which is not perfect but should
not give false positives.
This patch is tested with vim-colorschemes and Sublime-Gitignore
repositories on a JFS partition with case insensitive support on
Linux.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I looped over the toplevel header files, creating a temporary two-line C
program for each consisting of
#include "git-compat-util.h"
#include $HEADER
This patch is the result of manually fixing errors in compiling those
tiny programs.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strings allocated in `setup_unpack_trees_porcelain()` are never
freed. Provide a function `clear_unpack_trees_porcelain()` to do so and
call it where we use `setup_unpack_trees_porcelain()`. The only
non-trivial user is `unpack_trees_start()`, where we should place the
new call in `unpack_trees_finish()`.
We keep the string pointers in an array, mixing pointers to static
memory and memory that we allocate on the heap. We also keep several
copies of the individual pointers. So we need to make sure that we do
not free what we must not free and that we do not double-free. Let a
separate argv_array take ownership of all the strings we create so that
we can easily free them.
Zero the whole array of string pointers to make sure that we do not
leave any dangling pointers.
Note that we only take responsibility for the memory allocated in
`setup_unpack_trees_porcelain()` and not any other members of the
`struct unpack_trees_options`.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes an issue that existed before my directory rename detection
patches that affects both normal renames and renames implied by
directory rename detection. Additional codepaths that only affect
overwriting of dirty files that are involved in directory rename
detection will be added in a subsequent commit.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit e4bb62fa1e, reversing
changes made to 468165c1d8.
The topic appears to inflict severe regression in renaming merges,
even though the promise of it was that it would improve them.
We do not yet know which exact change in the topic was wrong, but in
the meantime, let's play it safe and revert it out of 'master'
before real Git-using projects are harmed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes an issue that existed before my directory rename detection
patches that affects both normal renames and renames implied by
directory rename detection. Additional codepaths that only affect
overwriting of dirty files that are involved in directory rename
detection will be added in a subsequent commit.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later patch we'll support submodule entries to be
in sync with the tree in working tree changing commands,
such as checkout or read-tree.
When a new submodule entry changes in the tree, we need to
check if there are conflicts (directory/file conflicts)
for the tree. Add this check for submodules to be
performed before the working tree is touched.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the type merge_fn_t to accept the array of cache_entry pointers
as const pointers to const pointers. This documents the fact that the
merge functions don't modify the cache_entry contents or replace any of
the pointers in the array.
Only a single cast is necessary in unpack_nondirectories because adding
two const modifiers at once is not allowed in C. The cast is safe in
that it doesn't mask any modfication; call_unpack_fn only needs the
array for reading.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is responsible for determining if a path that is not
tracked is ignored and allow "checkout" to overwrite it as needed.
It used excluded() without checking if higher level directory in the
path is ignored; correct it to use path_excluded() for this check.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
* There are uses of lower-level interface excluded_from_list() in
the codepath for narrow-checkout hack; they are supposed to be
already checking each level as they descend, and are not touched
with this patch.
* jc/diff-index-unpack:
diff-index: pass pathspec down to unpack-trees machinery
unpack-trees: allow pruning with pathspec
traverse_trees(): allow pruning with pathspec
Use the pathspec pruning of traverse_trees() from unpack_trees(). Again,
the unpack_trees() machinery is primarily meant for merging two (or more)
trees, and because a merge is a full tree operation, it didn't support any
pruning with pathspec, and this codepath probably should not be enabled
while running a merge, but the caller in diff-lib.c::diff_cache() should
be able to take advantage of it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A negative return from the unpack callback function usually means unpack
failed for the entry and signals the unpack_trees() machinery to fail the
entire merge operation, immediately and there is no other way for the
callback to tell the machinery to exit early without reporting an error.
This is what we usually want to make a merge all-or-nothing operation, but
the machinery is also used for diff-index codepath by using a custom
unpack callback function. And we do sometimes want to exit early without
failing, namely when we are under --quiet and can short-cut the diff upon
finding the first difference.
Add "exiting_early" field to unpack_trees_options structure, to signal the
unpack_trees() machinery that the negative return value is not signaling
an error but an early return from the unpack_trees() machinery. As this by
definition hasn't unpacked everything, discard the resulting index just
like the failure codepath.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now there was no way to test if unpack_trees() with update=1 would
succeed without really updating the work tree. The reason for that is that
setting update to 0 does skip the tests for new files and deactivates the
sparse handling, thereby making that unsuitable as a dry run.
Add the new dry_run flag to struct unpack_trees_options unpack_trees().
Setting that together with the update flag will check if the work tree
update would be successful without doing it for real.
The only class of problems that is not detected at the moment are file
system conditions like ENOSPC or missing permissions. Also the index
entries of updated files are not as they would be after a real checkout
because lstat() isn't run as the files aren't updated for real.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An aborted merge prints the list of rejected paths as part of the
error message. Since commit f66caaf9 (do not overwrite files in
leading path), some of those paths do not have static buffers, so
we have to keep a copy. Use string_list's to accomplish this.
This changes the order of the list to the order in which the paths
are processed. Previously, it was reversed.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not only this makes the code clearer since setting up the porcelain error
message is meant to work with show_all_errors, but this fixes a call to
setup_unpack_trees_porcelain() in git_merge_trees() which did not set
show_all_errors.
add_rejected_path() used to double-check whether it was running in
plumbing mode. This check was ineffective since it was setting
show_all_errors too late for traverse_trees() to see it, and is made
useless by this patch. Remove it.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a preparation patch to let setup_unpack_trees_porcelain set
show_all_errors itself.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function is currently dealing only with error messages, but the
intent of calling it is really to notify the unpack-tree mechanics that
it is running in porcelain mode.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an error is encountered, it calls add_rejected_file() which either
- directly displays the error message and stops if in plumbing mode
(i.e. if show_all_errors is not initialized at 1)
- or stores it so that it will be displayed at the end with display_error_msgs(),
Storing the files by error type permits to have a list of files for
which there is the same error instead of having a serie of almost
identical errors.
As each bind_overlap error combines a file and an old file, a list cannot be
done, therefore, theses errors are not stored but directly displayed.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To limit the number of possible error messages, the error messages for
the case would_lose_untracked_file and would_lose_orphaned in
unpack_trees_options.msgs were handled with a single string,
parameterized by an action string ("overwritten" or "removed").
Instead, we consider them as two different cases, with unparameterized
string. This will make it easier to make separate lists sorted by error
types later.
Only the bind_overlap case still takes two %s parameters, but that's
unavoidable.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list of error messages was introduced as a structure, but an array
indexed over an enum is more flexible, since it allows one to store a
type of error message (index in the array) in a variable.
This change needs to rename would_lose_untracked ->
would_lose_untracked_file to avoid a clash with the function
would_lose_untracked in merge-recursive.c.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/fix-tree-walk:
read-tree --debug-unpack
unpack-trees.c: look ahead in the index
unpack-trees.c: prepare for looking ahead in the index
Aggressive three-way merge: fix D/F case
traverse_trees(): handle D/F conflict case sanely
more D/F conflict tests
tests: move convenience regexp to match object names to test-lib.sh
Conflicts:
builtin-read-tree.c
unpack-trees.c
unpack-trees.h
This prepares but does not yet implement a look-ahead in the index entries
when traverse-trees.c decides to give us tree entries in an order that
does not match what is in the index.
A case where a look-ahead in the index is necessary happens when merging
branch B into branch A while the index matches the current branch A, using
a tree O as their common ancestor, and these three trees looks like this:
O A B
t t
t-i t-i t-i
t-j t-j
t/1
t/2
The traverse_trees() function gets "t", "t-i" and "t" from trees O, A and
B first, and notices that A may have a matching "t" behind "t-i" and "t-j"
(indeed it does), and tells A to give that entry instead. After unpacking
blob "t" from tree B (as it hasn't changed since O in B and A removed it,
it will result in its removal), it descends into directory "t/".
The side that walked index in parallel to the tree traversal used to be
implemented with one pointer, o->pos, that points at the next index entry
to be processed. When this happens, the pointer o->pos still points at
"t-i" that is the first entry. We should be able to skip "t-i" and "t-j"
and locate "t/1" from the index while the recursive invocation of
traverse_trees() walks and match entries found there, and later come back
to process "t-i".
While that look-ahead is not implemented yet, this adds a flag bit,
CE_UNPACKED, to mark the entries in the index that has already been
processed. o->pos pointer has been renamed to o->cache_bottom and it
points at the first entry that may still need to be processed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces core.sparseCheckout, which will control whether
sparse checkout support is enabled in unpack_trees()
It also loads sparse-checkout file that will be used in the next patch.
I split it out so the next patch will be shorter, easier to read.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cleanup the documentation to explicitly state that --exclude-directory
is only meaningful when used with -u. Also make the documentation more
consistent with the usage message printed with read-tree --help-all.
The -m, --prefix, --reset options are performing similar actions
(setting some flags, read_cache_unmerged(), checking for illegal option
combinations). Instead of performing these actions when the options are
parsed, we delay performing them until after parse-opts has finished.
The bit fields in struct unpack_trees_options have been promoted to full
unsigned ints. This is necessary to avoid "foo ? 1 : 0" constructs to
set these fields.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running "diff-index --cached" after making a change to only a small
portion of the index, there is no point unpacking unchanged subtrees into
the index recursively, only to find that all entries match anyway. Tweak
unpack_trees() logic that is used to read in the tree object to catch the
case where the tree entry we are looking at matches the index as a whole
by looking at the cache-tree.
As an exercise, after modifying a few paths in the kernel tree, here are
a few numbers on my Athlon 64X2 3800+:
(without patch, hot cache)
$ /usr/bin/time git diff --cached --raw
:100644 100644 b57e1f5... e69de29... M Makefile
:100644 000000 8c86b72... 0000000... D arch/x86/Makefile
:000000 100644 0000000... e69de29... A arche
0.07user 0.02system 0:00.09elapsed 102%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+9407minor)pagefaults 0swaps
(with patch, hot cache)
$ /usr/bin/time ../git.git/git-diff --cached --raw
:100644 100644 b57e1f5... e69de29... M Makefile
:100644 000000 8c86b72... 0000000... D arch/x86/Makefile
:000000 100644 0000000... e69de29... A arche
0.02user 0.00system 0:00.02elapsed 103%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+2446minor)pagefaults 0swaps
Cold cache numbers are very impressive, but it does not matter very much
in practice:
(without patch, cold cache)
$ su root sh -c 'echo 3 >/proc/sys/vm/drop_caches'
$ /usr/bin/time git diff --cached --raw
:100644 100644 b57e1f5... e69de29... M Makefile
:100644 000000 8c86b72... 0000000... D arch/x86/Makefile
:000000 100644 0000000... e69de29... A arche
0.06user 0.17system 0:10.26elapsed 2%CPU (0avgtext+0avgdata 0maxresident)k
247032inputs+0outputs (1172major+8237minor)pagefaults 0swaps
(with patch, cold cache)
$ su root sh -c 'echo 3 >/proc/sys/vm/drop_caches'
$ /usr/bin/time ../git.git/git-diff --cached --raw
:100644 100644 b57e1f5... e69de29... M Makefile
:100644 000000 8c86b72... 0000000... D arch/x86/Makefile
:000000 100644 0000000... e69de29... A arche
0.02user 0.01system 0:01.01elapsed 3%CPU (0avgtext+0avgdata 0maxresident)k
18440inputs+0outputs (79major+2369minor)pagefaults 0swaps
This of course helps "git status" as well.
(without patch, hot cache)
$ /usr/bin/time ../git.git/git-status >/dev/null
0.17user 0.18system 0:00.35elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+5336outputs (0major+10970minor)pagefaults 0swaps
(with patch, hot cache)
$ /usr/bin/time ../git.git/git-status >/dev/null
0.10user 0.16system 0:00.27elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+5336outputs (0major+3921minor)pagefaults 0swaps
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic to checkout a different commit implements the safety to never
lose user's local changes. For example, switching from a commit to
another commit, when you have changed a path that is different between
them, need to merge your changes to the version from the switched-to
commit, which you may not necessarily be able to resolve easily. By
default, "git checkout" refused to switch branches, to give you a chance
to stash your local changes (or use "-m" to merge, accepting the risks of
getting conflicts).
This safety, however, had one deliberate hole since early June 2005. When
your local change was to remove a path (and optionally to stage that
removal), the command checked out the path from the switched-to commit
nevertheless.
This was to allow an initial checkout to happen smoothly (e.g. an initial
checkout is done by starting with an empty index and switching from the
commit at the HEAD to the same commit). We can tighten the rule slightly
to allow this special case to pass, without losing sight of removal
explicitly done by the user, by noticing if the index is truly empty when
the operation begins.
For historical background, see:
http://thread.gmane.org/gmane.comp.version-control.git/4641/focus=4646
This case is marked as *0* in the message, which both Linus and I said "it
feels somewhat wrong but otherwise we cannot start from an empty index".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plumbing output is sacred as it is an API. We _could_ change it if it
is broken in such a way that it cannot convey necessary information fully,
but we just do not _reword_ for the sake of rewording. If somebody does
not like it, s/he is complaining too late. S/he should have been here in
early May 2005 and make the language used by the API closer to what humans
read. S/he wasn't here. Too bad, and it is too late.
And people who complain should look at a bigger picture. Look at what was
suggested by one of them and think for five seconds:
$ git checkout mytopic
-fatal: Entry 'frotz' not uptodate. Cannot merge.
+fatal: Entry 'frotz' has local changes. Cannot merge.
If you do not see something wrong with this output, your brain has already
been rotten with use of git for too long a time. Nobody asked us to
"merge" but why are we talking about "Cannot merge"?
This patch introduces a mechanism to allow Porcelains to specify messages
that are different from the ones that is given by the underlying plumbing
implementation of read-tree, so that we can reword the message Porcelains give
without disrupting the output from the plumbing.
$ git-checkout pu
error: You have local changes to 'Makefile'; cannot switch branches.
There are other places that ask unpack_trees() to n-way merge, detect
issues and let it issue error message on its own, but I did this as a
demonstration and replaced only one message.
Yes I know about C99 structure initializers. I'd love to use them but we
try to be nice to compilers without it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we find an unexpected file, see if that filename perhaps exists in a
case-insensitive way in the index, and whether the file matches that. If
so, ignore it as a known pre-existing file of a different name.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of wasting space with whole integers for a single bit.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read-tree -m can read up to MAX_TREES, which was arbitrarily set to 8 since
August 2007 (4 is needed to deal with 2 merge-base case).
However, the updated unpack_trees() code had an advertised limit of 4
(which it enforced). In reality the code was prepared to take only 3
trees and giving 4 caused it to stomp on its stack. Rename the MAX_TREES
constant to MAX_UNPACK_TREES, move it to the unpack-trees.h common header
file, and use it from both places to avoid future confusion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
