Our documentation claims we support curl versions back to 7.19.5. But we
can no longer compile with that version since adding an unconditional
use of CURLOPT_RESOLVE in 511cfd3bff (http: add custom hostname to IP
address resolutions, 2022-05-16). That feature wasn't added to libcurl
until 7.21.3.
We could add #ifdefs to make this work back to 7.19.5. But given that
nobody noticed the compilation failure in the intervening two years, it
makes more sense to bump the version in the documentation to 7.21.3
(which is itself over 13 years old).
We could perhaps go forward even more (which would let us drop some
cruft from git-curl-compat.h), but this should be an obviously safe
jump, and we can move forward later.
Note that user-visible syntax for CURLOPT_RESOLVE has grown new features
in subsequent curl versions. Our documentation mentions "+" and "-"
entries, which require more recent versions than 7.21.3. We could
perhaps clarify that in our docs, but it's probably not worth cluttering
them with restrictions of ancient curl versions.
This is a backport of c28ee09503 (INSTALL: bump libcurl version to
7.21.3, 2024-04-02) into the `maint-2.39` branch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In get_active_slot(), we return a CURL handle that may have been used
before (reusing them is good because it lets curl reuse the same
connection across many requests). We set a few curl options back to
defaults that may have been modified by previous requests.
We reset POSTFIELDS to NULL, but do not reset POSTFIELDSIZE (which
defaults to "-1"). This usually doesn't matter because most POSTs will
set both fields together anyway. But there is one exception: when
handling a large request in remote-curl's post_rpc(), we don't set
_either_, and instead set a READFUNCTION to stream data into libcurl.
This can interact weirdly with a stale POSTFIELDSIZE setting, because
curl will assume it should read only some set number of bytes from our
READFUNCTION. However, it has worked in practice because we also
manually set a "Transfer-Encoding: chunked" header, which libcurl uses
as a clue to set the POSTFIELDSIZE to -1 itself.
So everything works, but we're better off resetting the size manually
for a few reasons:
- there was a regression in curl 8.7.0 where the chunked header
detection didn't kick in, causing any large HTTP requests made by
Git to fail. This has since been fixed (but not yet released). In
the issue, curl folks recommended setting it explicitly to -1:
https://github.com/curl/curl/issues/13229#issuecomment-2029826058
and it indeed works around the regression. So even though it won't
be strictly necessary after the fix there, this will help folks who
end up using the affected libcurl versions.
- it's consistent with what a new curl handle would look like. Since
get_active_slot() may or may not return a used handle, this reduces
the possibility of heisenbugs that only appear with certain request
patterns.
Note that the recommendation in the curl issue is to actually drop the
manual Transfer-Encoding header. Modern libcurl will add the header
itself when streaming from a READFUNCTION. However, that code wasn't
added until 802aa5ae2 (HTTP: use chunked Transfer-Encoding for HTTP_POST
if size unknown, 2019-07-22), which is in curl 7.66.0. We claim to
support back to 7.19.5, so those older versions still need the manual
header.
This is a backport of 3242311742 (http: reset POSTFIELDSIZE when
clearing curl handle, 2024-04-02) into the `maint-2.39` branch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
To redact header lines in http/2 curl traces, we have to parse past some
prefix bytes that curl sticks in the info lines it passes to us. That
changed once already, and we adapted in db30130165 (http: handle both
"h2" and "h2h3" in curl info lines, 2023-06-17).
Now it has changed again, in curl's fbacb14c4 (http2: cleanup trace
messages, 2023-08-04), which was released in curl 8.3.0. Running a build
of git linked against that version will fail to redact the trace (and as
before, t5559 notices and complains).
The format here is a little more complicated than the other ones, as it
now includes a "stream id". This is not constant but is always numeric,
so we can easily parse past it.
We'll continue to match the old versions, of course, since we want to
work with many different versions of curl. We can't even select one
format at compile time, because the behavior depends on the runtime
version of curl we use, not the version we build against.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have to parse out curl's http/2 trace lines so we can redact their
headers. We already match two different types of lines from various
vintages of curl. In preparation for adding another (which will be
slightly more complex), let's pull the matching into its own function,
rather than doing it in the middle of a conditional.
While we're doing so, let's expand the comment a bit to describe the two
matches. That probably should have been part of db30130165 (http: handle
both "h2" and "h2h3" in curl info lines, 2023-06-17), but will become
even more important as we add new types.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When redacting auth tokens in trace output from curl, we look for http/2
headers of the form "h2h3 [header: value]". This comes from b637a41ebe
(http: redact curl h2h3 headers in info, 2022-11-11).
But the "h2h3" prefix changed to just "h2" in curl's fc2f1e547 (http2:
support HTTP/2 to forward proxies, non-tunneling, 2023-04-14). That's in
released version curl 8.1.0; linking against that version means we'll
fail to correctly redact the trace. Our t5559.17 notices and fails.
We can fix this by matching either prefix, which should handle both old
and new versions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of github.com:git/git:
A few more topics after 2.41-rc1
Git 2.41-rc1
t/lib-httpd: make CGIPassAuth support conditional
t9001: mark the script as no longer leak checker clean
send-email: clear the $message_id after validation
upload-pack: advertise capabilities when cloning empty repos
A bit more before -rc1
imap-send: include strbuf.h
run-command.c: fix missing include under `NO_PTHREADS`
test: do not negate test_path_is_* to assert absense
t2021: do not negate test_path_is_dir
tests: do not negate test_path_exists
doc/git-config: add unit for http.lowSpeedLimit
rebase -r: fix the total number shown in the progress
rebase --update-refs: fix loops
attr: teach "--attr-source=<tree>" global option to "git"
A few bugs in the sequencer machinery that results in miscounting
the steps have been corrected.
* js/rebase-count-fixes:
rebase -r: fix the total number shown in the progress
rebase --update-refs: fix loops
Small fixes.
* jc/do-not-negate-test-helpers:
test: do not negate test_path_is_* to assert absense
t2021: do not negate test_path_is_dir
tests: do not negate test_path_exists
We started unconditionally testing with CGIPassAuth directive but
it is unavailable in older Apache that ships with CentOS 7 that has
about a year of shelf-life still left. The test has conditionally
been disabled when running with an ancient Apache. This was a fix
for a recent regression caught before the release, so no need to
mention it in the release notes.
* jk/http-test-cgipassauth-unavailable-in-older-apache:
t/lib-httpd: make CGIPassAuth support conditional
The server side of "git clone" now advertises the necessary hints
to clients to help them to clone from an empty repository and learn
object hash algorithm and the (unborn) branch pointed at by HEAD,
even over the older v0/v1 protocol.
* bc/clone-empty-repo-via-protocol-v0:
upload-pack: advertise capabilities when cloning empty repos
When "git send-email" that uses the validate hook is fed a message
without and then with Message-ID, it failed to auto-assign a unique
Message-ID to the former and instead reused the Message-ID from the
latter, which has been corrected. This was a fix for a recent
regression caught before the release, so no need to mention it in
the release notes.
* jc/send-email-pre-process-fix:
t9001: mark the script as no longer leak checker clean
send-email: clear the $message_id after validation
Fix the build problem with NO_PTHREADS defined, a fallout from
recent header file shuffling.
* tb/run-command-needs-alloc-h:
run-command.c: fix missing include under `NO_PTHREADS`
Commit 988aad99b4 (t5563: add tests for basic and anoymous HTTP access,
2023-02-27) added tests that require Apache to support the CGIPassAuth
directive, which was added in Apache 2.4.13. This is fairly old (~8
years), but recent enough that we still encounter it in the wild (e.g.,
RHEL/CentOS 7, which is not EOL until June 2024).
We can live with skipping the new tests on such a platform. But
unfortunately, since the directive is used unconditionally in our
apache.conf, it means the web server fails to start entirely, and we
cannot run other HTTP tests at all (e.g., the basic ones in t5551).
We can fix that by making the config conditional, and only triggering it
for t5563. That solves the problem for t5551 (which then ignores the
directive entirely). For t5563, we'd see apache complain in start_httpd;
with the default setting of GIT_TEST_HTTPD, we'd then skip the whole
script.
But that leaves one small problem: people may set GIT_TEST_HTTPD=1
explicitly, which instructs the tests to fail (rather than skip) when we
can't start the webserver (to avoid accidentally missing some tests).
This could be worked around by having the user manually set
GIT_SKIP_TESTS on a platform with an older Apache. But we can be a bit
friendlier by doing the version check ourselves and setting an
appropriate prereq. We'll use the (lack of) prereq to then skip the rest
of t5563. In theory we could use the prereq to skip individual tests, but
in practice this whole script depends on it.
Reported-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test uses "format-patch --thread" which is known to leak the
generated message ID list.
Plugging these leaks involves straightening out the memory ownership
rules around rev_info.message_id and rev_info.ref_message_ids, and
is beyond the scope of send-email fix, so for now mark the test as
leaky to unblock the topic before the release.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently git-send-email started parsing the same message twice, once
to validate _all_ the message before sending even the first one, and
then after the validation hook is happy and each message gets sent,
to read the contents to find out where to send to etc.
Unfortunately, the effect of reading the messages for validation
lingered even after the validation is done. Namely $message_id gets
assigned if exists in the input files but the variable is global,
and it is not cleared before pre_process_file runs. This causes
reading a message without a message-id followed by reading a message
with a message-id to misbehave---the sub reports as if the message
had the same id as the previously written one.
Clear the variable before starting to read the headers in
pre_process_file.
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning an empty repository, protocol versions 0 and 1 currently
offer nothing but the header and flush packets for the /info/refs
endpoint. This means that no capabilities are provided, so the client
side doesn't know what capabilities are present.
However, this does pose a problem when working with SHA-256
repositories, since we use the capabilities to know the remote side's
object format (hash algorithm). As of 8b214c2e9d ("clone: propagate
object-format when cloning from void", 2023-04-05), this has been fixed
for protocol v2, since there we always read the hash algorithm from the
remote.
Fortunately, the push version of the protocol already indicates a clue
for how to solve this. When the /info/refs endpoint is accessed for a
push and the remote is empty, we include a dummy "capabilities^{}" ref
pointing to the all-zeros object ID. The protocol documentation already
indicates this should _always_ be sent, even for fetches and clones, so
let's just do that, which means we'll properly announce the hash
algorithm as part of the capabilities. This just works with the
existing code because we share the same ref code for fetches and clones,
and libgit2, JGit, and dulwich do as well.
There is one minor issue to fix, though. If we called send_ref with
namespaces, we would return NULL with the capabilities entry, which
would cause a crash. Instead, let's refactor out a function to print
just the ref itself without stripping the namespace and use it for our
special capabilities entry.
Add several sets of tests for HTTP as well as for local clones. The
behavior can be slightly different for HTTP versus a local or SSH clone
because of the stateless-rpc functionality, so it's worth testing both.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git --attr-source=<tree> cmd $args" is a new way to have any
command to read attributes not from the working tree but from the
given tree object.
* jc/attr-source-tree:
attr: teach "--attr-source=<tree>" global option to "git"
We make liberal use of the strbuf API functions and types, but the
inclusion of <strbuf.h> comes indirectly by including <http.h>,
which does not happen if you build with NO_CURL.
Signed-off-by: Christian Hesse <mail@eworm.de>
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git 2.41-rc0 fails to compile run-command.c with `NO_PTHREADS` defined,
i.e.
$ make NO_PTHREADS=1 run-command.o
as `ALLOC_GROW()` macro is used in the `atexit()` emulation but the
macro definition is not available.
This bisects to 36bf195890 (alloc.h: move ALLOC_GROW() functions from
cache.h, 2023-02-24), which replaced includes of <cache.h> with
<alloc.h>, which is the new home of `ALLOC_GROW()` (and
`ALLOC_GROW_BY()`).
We can see that run-command.c is the only one that try to use these
macros without including <alloc.h>.
$ git grep -l -e '[^_]ALLOC_GROW(' -e 'ALLOC_GROW_BY(' \*.c | sort >/tmp/1
$ git grep -l 'alloc\.h' \*.c | sort >/tmp/2
$ comm -23 /tmp/[12]
compat/simple-ipc/ipc-unix-socket.c
run-command.c
The "compat/" file only talks about the macro in the comment,
and is not broken.
We could fix this by conditionally including "alloc.h" when
`NO_PTHREADS` is defined. But we have relatively few examples of
conditional includes throughout the tree[^1].
Instead, include "alloc.h" unconditionally in run-command.c to allow it
to successfully compile even when NO_PTHREADS is defined.
[^1]: With `git grep -E -A1 '#if(n)?def' -- **/*.c | grep '#include' -B1`.
Reported-by: Randall S. Becker <randall.becker@nexbridge.ca>
Co-authored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests use "! test_path_is_dir" or "! test_path_is_file" to
ensure that the path is not recursively checked out or "submodule
update" did not touch the working tree.
Use "test_path_is_missing" to assert that the path does not exist,
instead of negating test_path_is_* helpers; they are designed to be
loud in wrong occasions. Besides, negating "test_path_is_dir" would
mean we would be happy if a file exists there, which is not the case
for these tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
