We have always set a global "spawned_pager" variable when we
start the pager. This lets us make the auto-color decision
later in the program as as "we are outputting to a terminal,
or to a pager which can handle colors".
Commit 6e9af86 added support for the GIT_PAGER_IN_USE
environment variable. An external program calling git (e.g.,
git-svn) could set this variable to indicate that it had
already started the pager, and that the decision about
auto-coloring should take that into account.
However, 6e9af86 failed to do the reverse, which is to tell
external programs when git itself has started the pager.
Thus a git command implemented as an external script that
has the pager turned on (e.g., "git -p stash show") would
not realize it was going to a pager, and would suppress
colors.
This patch remedies that; we always set GIT_PAGER_IN_USE
when we start the pager, and the value is respected by both
this program and any spawned children.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some cases, this is just making the test script a little
shorter and easier to read. However, there are several
places where we didn't take proper precautions against
polluting downstream tests with our config; this fixes them,
too.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few common tasks when working with configuration
variables in tests; this patch aims to make them a little
easier to write and less error-prone.
When setting a variable, you should typically make sure to
clean it up after the test is finished, so as not to pollute
other tests. Like:
test_when_finished 'git config --unset foo.bar' &&
git config foo.bar baz
This patch lets you just write:
test_config foo.bar baz
When clearing a variable that does not exist, git-config
will report a specific non-zero error code. Meaning that
tests which call "git config --unset" often either rely on
the prior tests having actually set it, or must use
test_might_fail. With this patch, the previous:
test_might_fail git config --unset foo.bar
becomes:
test_unconfig foo.bar
Not only is this easier to type, but it is more robust; it
will correctly detect errors from git-config besides "key
was not set".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests break &&-chaining to deal with broken "unset"
implementations. Instead, they should just use sane_unset.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-add-relurl-wo-upstream:
submodule add: clean up duplicated code
submodule add: allow relative repository path even when no url is set
submodule add: test failure when url is not configured in superproject
Conflicts:
git-submodule.sh
* js/ls-tree-error:
Ensure git ls-tree exits with a non-zero exit code if read_tree_recursive fails.
Add a test to check that git ls-tree sets non-zero exit code on error.
* bc/submodule-foreach-stdin-fix-1.7.4:
git-submodule.sh: preserve stdin for the command spawned by foreach
t/t7407: demonstrate that the command called by 'submodule foreach' loses stdin
* jk/combine-diff-binary-etc:
combine-diff: respect textconv attributes
refactor get_textconv to not require diff_filespec
combine-diff: handle binary files as binary
combine-diff: calculate mode_differs earlier
combine-diff: split header printing into its own function
Many pathnames in a fast-import stream need to be quoted. In
particular:
1. Pathnames at the end of an "M" or "D" line need quoting
if they contain a LF or start with double-quote.
2. Pathnames on a "C" or "R" line need quoting as above,
but also if they contain spaces.
For (1), we weren't quoting at all. For (2), we put
double-quotes around the paths to handle spaces, but ignored
the possibility that they would need further quoting.
This patch checks whether each pathname needs c-style
quoting, and uses it. This is slightly overkill for (1),
which doesn't actually need to quote many characters that
vanilla c-style quoting does. However, it shouldn't hurt, as
any implementation needs to be ready to handle quoted
strings anyway.
In addition to adding a test, we have to tweak a test which
blindly assumed that case (2) would always use
double-quotes, whether it needed to or not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tests in t7400 fails if the trash directory has a
symlink anywhere in its path. E.g.:
$ mkdir /tmp/git-test
$ mkdir /tmp/git-test/real
$ ln -s real /tmp/git-test/link
$ ./t7400-submodule-basic --root=/tmp/git-test/real
...
# passed all 44 test(s)
$ ./t7400-submodule-basic --root=/tmp/git-test/link
...
not ok - 41 use superproject as upstream when path is relative and no url is set there
The failing test does:
git submodule add ../repo relative &&
...
git submodule sync relative &&
test "$(git config submodule.relative.url)" = "$submodurl/repo"
where $submodurl comes from the $TRASH_DIRECTORY the user
gave us. However, git will resolve symlinks when converting
the relative path into an absolute one, leading them to be
textually different (even though they point to the same
directory).
Fix this by asking pwd to canonicalize the name of the trash
directory for us.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the --quiet flag "git submodule update" and "git submodule add"
didn't behave as the documentation stated. They printed progress output
from the clone, even though they should only print error messages.
Fix that by passing the -q flag to git clone in module_clone() when the
GIT_QUIET variable is set. Two tests in t7400 have been modified to test
that behavior.
Reported-by: Daniel Holtmann-Rice <flyingtabmow@gmail.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of a corrupt repository, git ls-tree may report an error but
presently it exits with a code of 0.
This change uses the return code of read_tree_recursive instead.
Improved-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On modern multi-core processors "make test" is often run in multiple jobs.
If one of them fails the test run does stop, but the concurrently running
tests finish their run. It is rather easy to find out which test failed by
doing a "ls -d t/trash*". But that only works when you don't use the "-i"
option to "make test" because you want to get an overview of all failing
tests. In that case all thrash directories are deleted end and the
information which tests failed is lost.
If one or more tests failed, print a list of them before the test summary:
failed test(s): t1000 t6500
fixed 0
success 7638
failed 3
broken 49
total 7723
This makes it possible to just run the test suite with -i and collect all
failed test scripts at the end for further examination.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expected to fail at this commit, fixed by subsequent commit.
Additional tests of adhoc or uncategorised nature should be added to this
file.
Improved-by: Jens Lehmann <Jens.Lehmann@web.de>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because "diff --cached HEAD" showed an incorrect blob object name on the
LHS of the diff, we ended up updating the index entry with bogus value,
not what we read from the tree.
Noticed by John Nowak.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user-supplied command spawned by 'submodule foreach' loses its
connection to the original standard input. Instead, it is connected to the
output of a pipe within the git-submodule script. The user-supplied
command supplied to 'submodule foreach' is spawned within a while loop
which is being piped into. Due to the way shells implement piping output
to a while loop, a subshell is created with its standard input attached to
the output of the pipe. This results in all of the commands executed
within the while loop to have their stdins modified in the same way,
including the user-supplied command.
This can cause a problem if the command requires reading from stdin or if
it changes its behavior based on whether stdin is a tty or not. For
example, this problem was noticed when trying to execute the following:
git submodule foreach git shortlog --since=two.weeks.ago
which printed a message about entering the first submodule and produced no
further output and exited with a status of zero. In this case, shortlog
detected that it was not connected to a tty, and since no revision was
supplied as an argument, it attempted to read the list of revisions from
standard input. Instead, it slurped up the list of submodules that was
being piped to the enclosing while loop and caused that loop to end early
without processing the remaining submodules.
Work around this behavior by saving the original standard input file
descriptor before the while loop, and restoring it when spawning the
user-supplied command.
This fixes the tests in t7407.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user-supplied command spawned by 'submodule foreach' loses its
connection to the original standard input. Instead, it is connected to the
output of a pipe within the git-submodule script. This can cause a problem
if the command requires reading from stdin or if it changes its behavior
based on whether stdin is a tty or not (e.g. git shortlog). Demonstrate
this flaw.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests try to be too careful about cleaning themselves up and
do
test_expect_success description '
set-up some test refs and/or configuration &&
test_when_finished "revert the above changes" &&
the real test
'
Which is nice to make sure that a potential failure would not have
unexpected interaction with the next test. This however interferes when
"the real test" fails and we want to see what is going on, by running the
test with --immediate mode and descending into its trash directory after
the test stops. The precondition to run the real test and cause it to fail
is all gone after the clean-up procedure defined by test_when_finished is
done.
Update test_run_ which is the workhorse of running a test script
called from test_expect_success and test_expect_failure, so that we do not
run clean-up script defined with test_when_finished when a test that is
expected to succeed fails under the --immediate mode.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Jeff King <peff@peff.net>
If the bottom of a mergeinfo range is a commit that maps to a git root
commit, then it doesn't have a parent. In such a case, use git commit
range "$top_commit" rather than "$bottom_commit^..$top_commit".
[ew: line-wrap at 80 columns]
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
If a svn:mergeinfo range starts at a commit that was converted as a
git root commit (e.g., r1 or a branch that was created out of thin
air), then there is an error when git-svn tries to run
git rev-list "$bottom_commit^..$top_commit"
because $bottom_commit (the git commit corresponding to r1) has no
parent.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Earlier 33f072f (submodule sync: Update "submodule.<name>.url" for empty
directories, 2010-10-08) attempted to fix a bug where "git submodule sync"
command does not update the URL if the current superproject does not have
a checkout of the submodule.
However, it did so by unconditionally registering submodule.$name.url to
every submodule in the project, even the ones that the user has never
showed interest in at all by running 'git submodule init' command. This
caused subsequent 'git submodule update' to start cloning/updating submodules
that are not interesting to the user at all.
Update the code so that the URL is updated from the .gitmodules file only
for submodules that already have submodule.$name.url entries, i.e. the
ones the user has showed interested in having a checkout.
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael J Gruber noticed that under /bin/dash this test failed
(as is expected -- \n in the string can be interpreted by the
command), while it passed with bash. We probably could work it
around by using backquote in front of it, but it is safer and
more readable to avoid "echo" altogether in a case like this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When on-demand mode was active examining the new commits just fetched in
the superproject (to check if they record commits for submodules which are
not downloaded yet) wasn't done recursively. Because of that fetch did not
recursively fetch submodules living in subdirectories even when it should
have.
Fix that by adding the RECURSIVE flag to the diff_options used to check
the new commits and avoid future regressions in this area by moving a
submodule in t5526 into a subdirectory.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now, "git tag -l foo* bar*" would silently ignore the
second argument, showing only refs starting with "foo". It's
not just unfriendly not to take a second pattern; we
actually generated subtly wrong results (from the user's
perspective) because some of the requested tags were
omitted.
This patch allows an arbitrary number of patterns on the
command line; if any of them matches, the ref is shown.
While we're tweaking the documentation, let's also make it
clear that the pattern is fnmatch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consider this graph:
D---E (topic, HEAD)
/ /
A---B---C (master)
\
F (topic2)
and the following three commands:
1. git rebase -i -p A
2. git rebase -i -p --onto F A
3. git rebase -i -p B
Currently, (1) and (2) will pick B, D, C, and E onto A and F,
respectively. However, (3) will only pick D and E onto B, but not C,
which is inconsistent with (1) and (2). As a result, we cannot modify C
during the interactive-rebase.
The current behavior also creates a bug if we do:
4. git rebase -i -p C
In (4), E is never picked. And since interactive-rebase resets "HEAD"
to "onto" before picking any commits, D and E are lost after the
interactive-rebase.
This patch fixes the inconsistency and bug by ensuring that all children
of upstream are always picked. This essentially reverts the commit:
d80d6bc146
When compiling the todo list, commits reachable from "upstream" should
never be skipped under any conditions. Otherwise, we lose the ability
to modify them like (3), and create a bug like (4).
Two of the tests contain a scenario like (3). Since the new behavior
added more commits for picking, these tests need to be updated to
account for the additional pick lines. A new test has also been added
for (4).
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we run tests under valgrind, we symlink anything
executable that starts with git-* or test-* into a special
valgrind bin directory, and then make that our
GIT_EXEC_PATH.
However, shell libraries like git-sh-setup do not have the
executable bit marked, and did not get symlinked. This
means that any test looking for shell libraries in our
exec-path would fail to find them, even though that is a
fine thing to do when testing against a regular git build
(or in a git install, for that matter).
t2300 demonstrated this problem. The fix is to symlink these
shell libraries directly into the valgrind directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The valgrind target just reinvokes make with GIT_TEST_OPTS
set to "--valgrind". However, it does this using an
environment variable, which means GIT_TEST_OPTS in your
config.mak would override it, and "make valgrind" would
simply run the test suite without valgrind on.
Instead, we should pass GIT_TEST_OPTS on the command-line,
overriding what's in config.mak, and take care to append to
whatever the user has there already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
refs.c had a error message "Trying to write ref with nonexistant object".
And no tests relied on the wrong spelling.
Also typo was present in some test scripts internals, these tests still pass.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.7.6-rc0~27^2~4 (gitweb: Change the way "content tags" ('ctags') are
handled, 2011-04-29) tried to make gitweb's tag cloud feature more
intuitive for webmasters by checking whether the ctags/<label> under
a project's .git dir contains a number (representing the strength of
association to <label>) before treating it as one.
With that change, after putting '$feature{'ctags'}{'default'} = [1];'
in your $GITWEB_CONFIG, you could do
echo Linux >.git/ctags/linux
and gitweb would treat that as a request to tag the current repository
with the Linux tag, instead of the previous behavior of writing an
error page embedded in the projects list that triggers error messages
from Chromium and Firefox about malformed XML.
Unfortunately the pattern (\d+) used to match numbers is too loose,
and the "XML declaration allowed only at the start of the document"
error can still be experienced if you write "Linux-2.6" in place of
"Linux" in the example above. Fix it by tightening the pattern to
^\d+$.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the same test and prerequisite as introduced in similar
fix in 650af7ae8b.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adding a submodule with a relative repository path did only succeed when
the superproject's default remote was set. But when that is unset, the
superproject is its own authoritative upstream, so lets use its working
directory as upstream instead.
This allows users to set up a new superpoject where the submodules urls
are configured relative to the superproject's upstream while its default
remote can be configured later.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This documents the current behavior (submodule add with the url set in the
superproject is already tested in t7403, t7406, t7407 and t7506).
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/maint-status-z-to-use-porcelain:
builtin/commit.c: set status_format _after_ option parsing
t7508: demonstrate status's failure to use --porcelain format with -z
Conflicts:
builtin/commit.c
When create a new branch, we fed "refs/heads/<proposed name>" as a string
to get_sha1() and expected it to fail when a branch already exists.
The right way to check if a ref exists is to check with resolve_ref().
A naïve solution that might appear attractive but does not work is to
forbid slashes in get_describe_name() but that will not work. A describe
name is is in the form of "ANYTHING-g<short sha1>", and that ANYTHING part
comes from a original tag name used in the repository the user ran the
describe command. A sick user could have a confusing hierarchical tag
whose name is "refs/heads/foobar" (stored as refs/tags/refs/heads/foobar")
to generate a describe name "refs/heads/foobar-6-g02ac983", and we should
be able to use that name to refer to the object whose name is 02ac983.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-config-alias-fix:
handle_options(): do not miscount how many arguments were used
config: always parse GIT_CONFIG_PARAMETERS during git_config
git_config: don't peek at global config_parameters
config: make environment parsing routines static
* jk/format-patch-am:
format-patch: preserve subject newlines with -k
clean up calling conventions for pretty.c functions
pretty: add pp_commit_easy function for simple callers
mailinfo: always clean up rfc822 header folding
t: test subject handling in format-patch / am pipeline
Conflicts:
builtin/branch.c
builtin/log.c
commit.h
