We used to unconditionally disable the pager in the pager process
we spawn to feed out output, but that prevented people who want to
run "less" within "less" from doing so.
* je/pager-do-not-recurse:
pager: do allow spawning pager recursively
"git commit --allow-empty-message -C $commit" did not work when the
commit did not have any log message.
* jk/commit-C-pick-empty:
commit: do not complain of empty messages from -C
Since the very beginning of Git, we gave the LESS environment a
default value "FRSX" when we spawn "less" as the pager. "S" (chop
long lines instead of wrapping) has been removed from this default
set of options, because it is more or less a personal taste thing,
as opposed to others that have good justifications (i.e. "R" is very
much justified because many kinds of output we produce are colored
and "FX" is justified because output we produce is often shorter
than a page).
Existing users who prefer not to see line-wrapped output may want to
set
$ git config core.pager "less -S"
to restore the traditional behaviour. It is expected that people
find output from the most subcommands easier to read with the new
default, except for "blame" which tends to produce really long
lines. To override the new default only for "git blame", you can do
this:
$ git config pager.blame "less -S"
* mm/pager-less-sans-S:
pager: remove 'S' from $LESS by default
In a repository with many refs, check_refname_component can be a major
contributor to the runtime of some git commands. One such command is
git rev-parse HEAD
Timings for one particular repo, with about 60k refs, almost all
packed, are:
Old: 35 ms
New: 29 ms
Many other commands which read refs are also sped up.
Signed-off-by: David Turner <dturner@twitter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/t7810-grep.sh had its own test_config() function which served the
same purpose as the one in t/test-lib-functions.sh. Removed, all tests
pass.
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two commands are supposed to be equivalent:
$ git log --exclude=refs/notes/\* --all --no-merges --since=2.days |
git shortlog
$ git shortlog --exclude=refs/notes/\* --all --no-merges --since=2.days
However, the latter does not understand the ref-exclusion command
line option, even though other options understood by "log", such as
"--all" and "--no-merges", are understood.
This was because e7b432c5 (revision: introduce --exclude=<glob> to
tame wildcards, 2013-08-30) did not wire the new option fully to the
machinery. A new option understood by handle_revision_pseudo_opt()
must be told to handle_revision_opt() as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test_cmp() is primarily meant to compare text files (and display the
difference for debug purposes).
Raw "cmp" is better suited to compare binary files (tar, zip, etc.).
On MinGW, test_cmp is a shell function mingw_test_cmp that tries to
read both files into environment, stripping CR characters (introduced
in commit 4d715ac0).
This function usually speeds things up, as fork is extremly slow on
Windows. But no wonder that this function is extremely slow and
sometimes even crashes when comparing large tar or zip files.
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "git update-index --cacheinfo" without any further
arguments results in a segfault rather than an error
message. Commit ec160ae (update-index: teach --cacheinfo a
new syntax "mode,sha1,path", 2014-03-23) added code to
examine the format of the argument, but forgot to handle the
NULL case.
Returning an error from the parser is enough, since we then
treat it as an old-style "--cacheinfo <mode> <sha1> <path>",
and complain that we have less than 3 arguments to read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/commit-date-approxidate:
commit: accept more date formats for "--date"
commit: print "Date" line when the user has set date
pretty: make show_ident_date public
commit: use split_ident_line to compare author/committer
Adjust shell scripts to use $(cmd) instead of `cmd`.
* ep/shell-command-substitution: (41 commits)
t5000-tar-tree.sh: use the $( ... ) construct for command substitution
t4204-patch-id.sh: use the $( ... ) construct for command substitution
t4119-apply-config.sh: use the $( ... ) construct for command substitution
t4116-apply-reverse.sh: use the $( ... ) construct for command substitution
t4057-diff-combined-paths.sh: use the $( ... ) construct for command substitution
t4038-diff-combined.sh: use the $( ... ) construct for command substitution
t4036-format-patch-signer-mime.sh: use the $( ... ) construct for command substitution
t4014-format-patch.sh: use the $( ... ) construct for command substitution
t4013-diff-various.sh: use the $( ... ) construct for command substitution
t4012-diff-binary.sh: use the $( ... ) construct for command substitution
t4010-diff-pathspec.sh: use the $( ... ) construct for command substitution
t4006-diff-mode.sh: use the $( ... ) construct for command substitution
t3910-mac-os-precompose.sh: use the $( ... ) construct for command substitution
t3905-stash-include-untracked.sh: use the $( ... ) construct for command substitution
t1050-large.sh: use the $( ... ) construct for command substitution
t1020-subdirectory.sh: use the $( ... ) construct for command substitution
t1004-read-tree-m-u-wf.sh: use the $( ... ) construct for command substitution
t1003-read-tree-prefix.sh: use the $( ... ) construct for command substitution
t1002-read-tree-m-u-2way.sh: use the $( ... ) construct for command substitution
t1001-read-tree-m-2way.sh: use the $( ... ) construct for command substitution
...
mergetool.prompt used to default to 'true', always causing a confirmation
"do you really want to run the tool on this path" to be shown.
Among the two purposes the prompt serves, ignore the use case to
confirm that the user wants to view particular path with the named
tool, and make the prompt only to confirm the choice of the tool
made by autodetection and defaulting. For those who configured the
tool explicitly, the prompt shown for the latter purpose is simply
annoying.
Strictly speaking, this is a backward incompatible change and the
users need to explicitly set the variable to 'true' if they want to
resurrect the now-ignored use case.
* fc/mergetool-prompt:
mergetool: document the default for --[no-]prompt
mergetool: run prompt only if guessed tool
* ef/send-email-absolute-path-to-the-command:
send-email: windows drive prefix (e.g. C:) appears only at the beginning
send-email: recognize absolute path on Windows
"git blame" miscounted number of columns needed to show localized
timestamps, resulting in jaggy left-side-edge of the source code
lines in its output.
* jx/blame-align-relative-time:
blame: dynamic blame_date_width for different locales
blame: fix broken time_buf paddings in relative timestamp
"git merge" without argument, even when there is an upstream
defined for the current branch, refused to run until
merge.defaultToUpstream is set to true. Flip the default of that
configuration variable to true.
* fc/merge-default-to-upstream:
merge: enable defaulttoupstream by default
Code clean-up (and a bugfix which has been merged for 2.0).
* jk/external-diff-use-argv-array:
run_external_diff: refactor cmdline setup logic
run_external_diff: hoist common bits out of conditional
run_external_diff: drop fflush(NULL)
run_external_diff: clean up error handling
run_external_diff: use an argv_array for the environment
* rs/ref-update-check-errors-early:
commit.c: check for lock error and return early
sequencer.c: check for lock failure and bail early in fast_forward_to
Enable threaded index-pack on platforms without thread-unsafe
pread() emulation.
* nd/index-pack-one-fd-per-thread:
index-pack: work around thread-unsafe pread()
Read-only operations such as "git status" that internally refreshes
the index write out the refreshed index to the disk to optimize
future accesses to the working tree, but this could race with a
"read-write" operation that modify the index while it is running.
Detect such a race and avoid overwriting the index.
Duy raised a good point that we may need to do the same for the
normal writeout codepath, not just the "opportunistic" update
codepath. While that is true, nobody sane would be running two
simultaneous operations that are clearly write-oriented competing
with each other against the same index file. So in that sense that
can be done as a less urgent follow-up for this topic.
* ym/fix-opportunistic-index-update-race:
read-cache.c: verify index file before we opportunistically update it
wrapper.c: add xpread() similar to xread()
Update "update-ref --stdin [-z]" and then introduce a transactional
support for (multi-)reference updates.
* mh/ref-transaction: (27 commits)
ref_transaction_commit(): work with transaction->updates in place
struct ref_update: add a type field
struct ref_update: add a lock field
ref_transaction_commit(): simplify code using temporary variables
struct ref_update: store refname as a FLEX_ARRAY
struct ref_update: rename field "ref_name" to "refname"
refs: remove API function update_refs()
update-ref --stdin: reimplement using reference transactions
refs: add a concept of a reference transaction
update-ref --stdin: harmonize error messages
update-ref --stdin: improve the error message for unexpected EOF
t1400: test one mistake at a time
update-ref --stdin -z: deprecate interpreting the empty string as zeros
update-ref.c: extract a new function, parse_next_sha1()
t1400: test that stdin -z update treats empty <newvalue> as zeros
update-ref --stdin: simplify error messages for missing oldvalues
update-ref --stdin: make error messages more consistent
update-ref --stdin: improve error messages for invalid values
update-ref.c: extract a new function, parse_refname()
parse_cmd_verify(): copy old_sha1 instead of evaluating <oldvalue> twice
...
Instead of running N pair-wise diff-trees when inspecting a
N-parent merge, find the set of paths that were touched by walking
N+1 trees in parallel. These set of paths can then be turned into
N pair-wise diff-tree results to be processed through rename
detections and such. And N=2 case nicely degenerates to the usual
2-way diff-tree, which is very nice.
* ks/tree-diff-nway:
mingw: activate alloca
combine-diff: speed it up, by using multiparent diff tree-walker directly
tree-diff: rework diff_tree() to generate diffs for multiparent cases as well
Portable alloca for Git
tree-diff: reuse base str(buf) memory on sub-tree recursion
tree-diff: no need to call "full" diff_tree_sha1 from show_path()
tree-diff: rework diff_tree interface to be sha1 based
tree-diff: diff_tree() should now be static
tree-diff: remove special-case diff-emitting code for empty-tree cases
tree-diff: simplify tree_entry_pathcmp
tree-diff: show_path prototype is not needed anymore
tree-diff: rename compare_tree_entry -> tree_entry_pathcmp
tree-diff: move all action-taking code out of compare_tree_entry()
tree-diff: don't assume compare_tree_entry() returns -1,0,1
tree-diff: consolidate code for emitting diffs and recursion in one place
tree-diff: show_tree() is not needed
tree-diff: no need to pass match to skip_uninteresting()
tree-diff: no need to manually verify that there is no mode change for a path
combine-diff: move changed-paths scanning logic into its own function
combine-diff: move show_log_first logic/action out of paths scanning
"--ignore-space-change" option of "git apply" ignored the
spaces at the beginning of line too aggressively, which is
inconsistent with the option of the same name "diff" and "git diff"
have.
* jc/apply-ignore-whitespace:
apply --ignore-space-change: lines with and without leading whitespaces do not match
Add a configuration variable to force --full-name to be default for
"git grep".
This may cause regressions on scripted users that do not expect
this new behaviour.
* as/grep-fullname-config:
grep: add grep.fullName config variable
read_ref_at has its own parsing of the reflog file for no really good reason
so lets change this to use the existing reflog iterators. This removes one
instance where we manually unmarshall the reflog file format.
Remove the now redundant ref_msg function.
Log messages for errors are changed slightly. We no longer print the file
name for the reflog, instead we refer to it as 'Log for ref <refname>'.
This might be a minor useability regression, but I don't really think so, since
experienced users would know where the log is anyway and inexperienced users
would not know what to do about/how to repair 'Log ... has gap ...' anyway.
Adapt the t1400 test to handle the change in log messages.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many people are on filesystems with horrible stat latency (not
limited to Windows but also NFS), which core.preloadindex was
designed to help. We discussed enabling it by default early in 2013
but didn't.
Per
http://thread.gmane.org/gmane.comp.version-control.git/219273/focus=219322
let's enable the setting by default, with the original choice of max
20 threads / min 500 paths per thread parameters.
Signed-off-by: Steve Hoelzer <shoelzer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you try to commit with unmerged entries, you get an
error like:
$ git commit
error: 'commit' is not possible because you have unmerged files.
The quotes around "commit" are clunky; the user doesn't care
that this message is a template with the command-name filled
in. Saying:
error: commit is not possible because you have unmerged files
is easier to read. As this code is called from other places,
we may also end up with:
$ git merge
error: merge is not possible because you have unmerged files
$ git cherry-pick foo
error: cherry-pick is not possible because you have unmerged files
$ git revert foo
error: revert is not possible because you have unmerged files
All of which look better without the quotes. This also
happens to match the behavior of "git pull", which generates
a similar message (but does not share code, as it is a shell
script).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you try to commit with unresolved conflicts in the index,
you get this message:
$ git commit
U foo
error: 'commit' is not possible because you have unmerged files.
hint: Fix them up in the work tree,
hint: and then use 'git add/rm <file>' as
hint: appropriate to mark resolution and make a commit,
hint: or use 'git commit -a'.
fatal: Exiting because of an unresolved conflict.
The irregular line-wrapping makes this awkward to read, and
it takes up more lines than necessary. Instead, let's rewrap
it to about 60 characters per line:
$ git commit
U foo
error: 'commit' is not possible because you have unmerged files.
hint: Fix them up in the work tree, and then use 'git add/rm <file>'
hint: as appropriate to mark resolution and make a commit, or use
hint: 'git commit -a'.
fatal: Exiting because of an unresolved conflict.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Discard the unnecessary 'nr_spaces' variable, remove 'strlen()' and
improve the 'if' structure. Switch to pointers instead of integers
to control the loop.
Slightly more rare occurrences of 'text \ ' with a backslash
in between spaces are handled correctly. Namely, the code in
7e2e4b37 (dir: ignore trailing spaces in exclude patterns, 2014-02-09)
does not reset 'last_space' when a backslash is encountered and the above
line stays intact as a result.
Add a test at the end of t/t0008-ignores.sh to exhibit this behavior.
Signed-off-by: Pasha Bolokhov <pasha.bolokhov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whenever the hash table becomes too small then its size is increased,
the original part (and the added space) is zerod out using memset(),
and the table is rebuilt from scratch.
Simplify this proceess by returning the old memory using free() and
allocating the new buffer using xcalloc(), which already clears the
buffer for us. That way we avoid copying the old hash table contents
needlessly inside xrealloc().
While at it, use the first array member with sizeof instead of a
specific type. The old code used uint32_t and int, while index is
actually an array of int32_t. Their sizes are the same basically
everywhere, so it's not actually a problem, but the new code is
cleaner and doesn't have to be touched should the type be changed.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The array header is defined as:
static const char *header[MAX_HDR_PARSED] = {
"From","Subject","Date",
};
When looking for the index of a specfic string in that array, simply
use strcmp() instead of memcmp(). This avoids running over the end of
the string (e.g. with memcmp("Subject", "From", 7)) and gets rid of
magic string length constants.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recent addition to the test case 'pull request format' interrupted
the single-quoted text, effectively adding a third argument to the
test_expect_success command. Since we do not have a prerequisite named
"pull request format", the test is skipped, no matter what. Additionally,
the file name argument to the grep command is missing. Fix both issues.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Diagnostic messages received on the sideband #2 from the server side
are sent to the standard error with ANSI terminal control sequence
"\033[K" that erases to the end of line appended at the end of each
line.
However, some programs (e.g. GitExtensions for Windows) read and
interpret and/or show the message without understanding the terminal
control sequences, resulting them to be shown to their end users.
To help these programs, squelch the control sequence when the
standard error stream is not being sent to a tty.
NOTE: I considered to cover the case that a pager has already been
started. But decided that is probably not worth worrying about here,
though, as we shouldn't be using a pager for commands that do network
communications (and if we do, omitting the magic line-clearing signal
is probably a sane thing to do).
Thanks-to: Erik Faye-Lund <kusmabite@gmail.com>
Thanks-to: Jeff King <peff@peff.net>
Signed-off-by: Michael Naumov <mnaoumov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This works kind of like "--color=auto" - add decorations for interactive
use, but do not change defaults when scripting or when piping the output
to anything but a terminal.
You can use either
[log]
decorate=auto
in the git config files, or the "--decorate=auto" command line option to
choose this behavior.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The changes to make detection of endianness more portable had a bug
that breaks on (at least) Solaris x86.
The bug appears to be a simple copy/paste typo. It checks for
_BIG_ENDIAN and not _LITTLE_ENDIAN for both the case where we would
decide the system is big endian and little endian. Instead, the
second test should be for _LITTLE_ENDIAN and not _BIG_ENDIAN.
Two fixes were possible:
1. Change the negation order of the conditions in the second test.
2. Reverse the order of the conditions in the second test.
Use the second option so that the condition we expect is always a
positive check.
Signed-off-by: Ben Walton <bdwalton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As 0232852b, but for the push tests instead: this avoids a start_httpd
in the middle of the file, which fails under GIT_TEST_HTTPD=false.
Note that we have to munge the test in a few ways while
moving it:
1. We drop the `test -z "$GIT_TEST_HTTPD"` check; this is
too simplistic since 83d842d, and we should let
lib-httpd.sh handle it.
2. We have to port over some of the old setup from t5538.
3. In the final test, we no longer expect the extra commit
"1" built on top of "4". This was a side effect from an
earlier test in t5538 which was not ported over.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is expected to be the final maintenance release for 1.9 series,
merging the remaining fixes that are relevant and are already in 2.0.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
