Solaris only uses one colon in the listing of the ACL mask, Linux uses two,
so substitute egrep for grep and make the second colon optional.
The -q option for Solaris 7's /usr/xpg4/bin/egrep does not appear to be
implemented, so redirect output to /dev/null.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some implementations of setfacl do not recalculate the effective rights
mask when the ACL is modified. So, set the effective rights mask
explicitly to ensure that the ACL's that are set on the directories will
have effect.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test was using the group read permission bit as an indicator of the
default ACL mask. This behavior is valid on Linux but not on other
platforms like Solaris. So, rather than looking at mode bits, just test
readability for the user. This, along with the checks for the existence
of the ACL's that were set on the parent directories, should be enough.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the Linux setfacl man page, in order for an ACL to be valid,
the following rules must be satisfied:
* Whenever an ACL contains any Default ACL entries, the three Default
ACL base entries (default owner, default group, and default others)
must also exist.
* Whenever a Default ACL contains named user entries or named group
objects, it must also contain a default effective rights mask.
Some implementations of setfacl (Linux) do this automatically when
necessary, some (Solaris) do not. Solaris's setfacl croaks when trying to
create a default user ACL if the above rules are not satisfied. So, create
them before modifying the default user ACL's.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms (Solaris) have a setfacl whose -d switch works differently
than the one on Linux. On Linux, it causes all operations to be applied
to the Default ACL. There is a notation for operating on the Default ACL:
[d[efault]:] [u[ser]:]uid [:perms]
so use it instead of the -d switch.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey noticed that t5505 had accidentally broken its && chain,
hiding inconsistency between the code that writes the warning to the
standard output and the test that expects to see the warning on the
standard error, which was introduced by f8948e2 (remote prune: warn
dangling symrefs, 2009-02-08).
It turns out that the issue is deeper than that. After f8948e2, a symref
that is dangling is marked with a NULL sha1, and the idea of using NULL
sha1 to mean a deleted ref was scrapped, but somehow a follow-up eafb452
(do_one_ref(): null_sha1 check is not about broken ref, 2009-07-22)
incorrectly reorganized do_one_ref(), still thinking NULL sha1 is never
used in the code.
Fix this by:
- adopt Brandon's fix to t5505 test;
- introduce REF_BROKEN flag to mark a ref that fails to resolve (dangling
symref);
- move the check for broken ref back inside the "if we are skipping
dangling refs" code block.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sd/format-patch-to:
send-email: add --no-cc, --no-to, and --no-bcc
format-patch: add --no-cc, --no-to, and --no-add-headers
format-patch: use a string_list for headers
Add 'git format-patch --to=' option and 'format.to' configuration variable.
* tc/http-cleanup:
remote-curl: init walker only when needed
remote-curl: use http_fetch_ref() instead of walker wrapper
http: init and cleanup separately from http-walker
http-walker: cleanup more thoroughly
http-push: remove "|| 1" to enable verbose check
t554[01]-http-push: refactor, add non-ff tests
t5541-http-push: check that ref is unchanged for non-ff test
* ld/push-porcelain:
t5516: Use test_cmp when appropriate
git-push: add tests for git push --porcelain
git-push: make git push --porcelain print "Done"
git-push: send "To <remoteurl>" messages to the standard output in --porcelain mode
git-push: fix an advice message so it goes to stderr
Conflicts:
transport.c
* jh/notes: (33 commits)
Documentation: fix a few typos in git-notes.txt
notes: fix malformed tree entry
builtin-notes: Minor (mostly parse_options-related) fixes
builtin-notes: Add "copy" subcommand for copying notes between objects
builtin-notes: Misc. refactoring of argc and exit value handling
builtin-notes: Add -c/-C options for reusing notes
builtin-notes: Refactor handling of -F option to allow combining -m and -F
builtin-notes: Deprecate the -m/-F options for "git notes edit"
builtin-notes: Add "append" subcommand for appending to note objects
builtin-notes: Add "add" subcommand for adding notes to objects
builtin-notes: Add --message/--file aliases for -m/-F options
builtin-notes: Add "list" subcommand for listing note objects
Documentation: Generalize git-notes docs to 'objects' instead of 'commits'
builtin-notes: Add "prune" subcommand for removing notes for missing objects
Notes API: prune_notes(): Prune notes that belong to non-existing objects
t3305: Verify that removing notes triggers automatic fanout consolidation
builtin-notes: Add "remove" subcommand for removing existing notes
Teach builtin-notes to remove empty notes
Teach notes code to properly preserve non-notes in the notes tree
t3305: Verify that adding many notes with git-notes triggers increased fanout
...
Conflicts:
Makefile
git rebase allows you to specify a non-branch commit-ish as the "branch"
argument, which leaves HEAD detached when it's finished. This is
occasionally useful, and this patch brings the same functionality to git
rebase --interactive.
Signed-off-by: Dave Olszewski <cxreg@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test is to prepare an empty file "camelcase" in the index, remove
and replace it with another file "CamelCase" with "1" as its contents
in the working tree, and add it to the index, in a repository configured
to be case insensitive.
However, the test actually checked ls-files knows about a pathname that
matches "camelcase" case insensitively. It didn't check if the added
contents actually was the updated one.
Mark the test as non-working.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1.7.0 submodules are considered dirty when they contain untracked
files. But when git status is called with the "-uno" option, the user
asked to ignore untracked files, so they must be ignored in submodules
too. To achieve this, the new flag DIFF_OPT_IGNORE_UNTRACKED_IN_SUBMODULES
is introduced.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
don't use default revision if a rev was specified
for_each_recent_reflog_ent(): use strbuf, fix offset handling
t/Makefile: remove test artifacts upon "make clean"
blame: fix indent of line numbers
If a revision is specified, it happens not to have any commits, don't
use the default revision. By doing so, surprising and undesired
behavior can happen, such as showing the reflog for HEAD when a branch
was specified.
[jc: squashed a test from René]
Signed-off-by: Dave Olszewski <cxreg@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct the calculation of the number of digits for line counts of the
form 10^n-1 (9, 99, ...) in lineno_width(). This makes blame stop
printing an extra space before the line numbers of files with that many
total lines.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rewrite-root option seems to be a bit problematic with merge
detecting, so it's better to have a merge detecting test with it
turned on.
Signed-off-by: Tuomas Suutari <tuomas.suutari@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Testing if the output "new commits" should appear in the long format of
"git status" is done by comparing the hashes of the diffpair. This always
resulted in printing "new commits" for submodules that contained untracked
or modified content, even if they did not contain new commits. The reason
was that match_stat_with_submodule() did set the "changed" flag for dirty
submodules, resulting in two->sha1 being set to the null_sha1 at the call
sites, which indicates that new commits are present. This is changed so
that when no new commits are present, the same object names are in the
sha1 field for both sides of the filepair, and the working tree side will
have the "dirty_submodule" flag set when appropriate. For a submodule to
be seen as modified even when it just has a dirty work tree, some
conditions had to be extended to also check for the "dirty_submodule"
flag.
Unfortunately the test case that should have found this bug had been
changed incorrectly too. It is fixed and extended to test for other
combinations too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running 'git notes copy -h' is not very helfpul right now. It lists
the options for all the git notes subcommands and is rather confusing.
Fix this by splitting cmd_notes() into separate functions for each
subcommand (besides append and edit since they're very similar) and
only providing a usage message for the subcommand.
This has an added benefit of reducing the code complexity while making
it safer and easier to read. The downside is we get some code bloat
from similar setup and teardown needed for notes and options parsing.
We also get a bit stricter in options parsing by only allowing
the ref option to come before the subcommand.
Acked-by: Johan Herland <johan@herland.net>
Cc: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teaches 'git commit --amend' to copy notes. The catch is that this
must also be guarded by --no-post-rewrite, which we use to prevent
--amend from copying notes during a rebase -i 'edit'/'reword'.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Luckily, all the support already happens to be there.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement helper functions to load the rewriting config, and to
actually copy the notes. Also document the config.
Secondly, also implement an undocumented --for-rewrite=<cmd> option to
'git notes copy' which is used like --stdin, but also puts the
configuration for <cmd> into effect. It will be needed to support the
copying in git-rebase.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This implements a mass-copy command that takes a sequence of lines in
the format
<from-sha1> SP <to-sha1> [ SP <rest> ] LF
on stdin, and copies each <from-sha1>'s notes to the <to-sha1>. The
<rest> is ignored. The intent, of course, is that this can read the
same input that the 'post-rewrite' hook gets.
The copy_note() function is exposed for everyone's and in particular
the next commit's use.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aside from the same issue that rebase also has (remembering the
original commit across a conflict resolution), rebase -i brings an
extra twist: We need to defer writing the rewritten list in the case
of {squash,fixup} because their rewritten result should be the last
commit in the squashed group.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have to deal with two separate code paths: a normal rebase, which
actually goes through git-am; and rebase {-m|-s}.
The only small issue with both is that they need to remember the
original sha1 across a possible conflict resolution. rebase -m
already puts this information in $dotest/current, and we just
introduce a similar file for git-am.
Note that in git-am, the hook really only runs when coming from
git-rebase: the code path that sets the $dotest/original-commit file
is guarded by a test for $dotest/rebasing.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rough structure of run_rewrite_hook() comes from
run_receive_hook() in receive-pack.
We introduce a --no-post-rewrite option and use it to avoid the hook
when called from git-rebase -i 'edit'. The next patch will add full
support in git-rebase, and we only want to invoke the hook once.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, you can set notes.displayRef to a glob that points at
your favourite notes refs, e.g.,
[notes]
displayRef = refs/notes/*
Then git-log and friends will show notes from all trees.
Thanks to Junio C Hamano for lots of feedback, which greatly
influenced the design of the entire series and this commit in
particular.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consistently using test_cmp would make debugging test scripts far easier,
as output from them run under "-v" option becomes readable.
Besides, some platforms' "diff" implementations lack "-q" option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consistently using test_cmp would make debugging test scripts far easier,
as output from them run under "-v" option becomes readable.
Besides, some platforms' "diff" implementations lack "-q" option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sd/init-template:
wrap-for-bin: do not export an empty GIT_TEMPLATE_DIR
t/t0001-init.sh: add test for 'init with init.templatedir set'
init: having keywords without value is not a global error.
Add a "TEMPLATE DIRECTORY" section to git-init[1].
Add `init.templatedir` configuration variable.
* sh/am-keep-cr:
git-am: Add tests for `--keep-cr`, `--no-keep-cr` and `am.keepcr`
git-am: Add am.keepcr and --no-keep-cr to override it
git-am: Add command line parameter `--keep-cr` passing it to git-mailsplit
documentation: 'git-mailsplit --keep-cr' is not hidden anymore
Given that "git show" always shows some diff and does not walk the history
by default, it is natural to expect "git show --first-parent" to show the
difference between the given commit and its first parent. It also would
be natural, given that "--cc" is the default, "git show -m" to show
pairwise difference from each of the parents.
We however always defaulted to --cc and there was no way to turn it off.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, "show" defaulted to "show --cc" (dense combined patch), but
asking for combined patch with "show -c" didn't turn the patch output
format on; the placement of this logic in setup_revisions() dates back to
cd2bdc5 (Common option parsing for "git log --diff" and friends,
2006-04-14).
This unfortunately cannot be done as a trivial change of "if dense
combined is asked, default to patch format" done in setup_revisions() to
"if any combined is asked, default to patch format", as "diff-tree -c"
needs to default to raw, while "diff-tree --cc" needs to default to patch,
and they share the codepath. These command specific defaults are now
handled in the new "tweak" callback that can be customized by individual
command implementations.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no way to override the sendemail.to, sendemail.cc, and
sendemail.bcc config settings. Add options allowing the user to tell
git to ignore the config settings and take whatever is on the command
line.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These new options allow users to override their config settings for
format.cc, format.to and format.headers respectively. These options
only make git ignore the config settings and any previous command line
options, so you'll still have to add more command line options to add
extra headers. For example,
$ cat .git/config
[format]
to = Someone <someone@out.there>
$ git format-patch -1 --no-to --to="Someone Else <else@out.there>"
would format a patch addressed to "Someone Else" and not "Someone".
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1.7.0 there are three reasons a submodule is considered modified
against the work tree: It contains new commits, modified content or
untracked content. Lets show all reasons in the long format of git status,
so the user can better asses the nature of the modification. This change
does not affect the short and porcelain formats.
Two new members are added to "struct wt_status_change_data" to store the
information gathered by run_diff_files(). wt-status.c uses the new flag
DIFF_OPT_DIRTY_SUBMODULES to tell diff-lib.c it wants to get detailed
dirty information about submodules.
A hint line for submodules is printed in the dirty header when dirty
submodules are present.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/fetch-param:
fetch --all/--multiple: keep all the fetched branch information
builtin-fetch --all/--multi: propagate options correctly
t5521: fix and modernize
* mm/mkstemps-mode-for-packfiles:
Use git_mkstemp_mode instead of plain mkstemp to create object files
git_mkstemps_mode: don't set errno to EINVAL on exit.
Use git_mkstemp_mode and xmkstemp_mode in odb_mkstemp, not chmod later.
git_mkstemp_mode, xmkstemp_mode: variants of gitmkstemps with mode argument.
Move gitmkstemps to path.c
Add a testcase for ACL with restrictive umask.
* jc/fetch-param:
fetch --all/--multiple: keep all the fetched branch information
builtin-fetch --all/--multi: propagate options correctly
t5521: fix and modernize
* nd/root-git:
Add test for using Git at root of file system
Support working directory located at root
Move offset_1st_component() to path.c
init-db, rev-parse --git-dir: do not append redundant slash
make_absolute_path(): Do not append redundant slash
Conflicts:
setup.c
sha1_file.c
* mm/mkstemps-mode-for-packfiles:
Use git_mkstemp_mode instead of plain mkstemp to create object files
git_mkstemps_mode: don't set errno to EINVAL on exit.
Use git_mkstemp_mode and xmkstemp_mode in odb_mkstemp, not chmod later.
git_mkstemp_mode, xmkstemp_mode: variants of gitmkstemps with mode argument.
Move gitmkstemps to path.c
Add a testcase for ACL with restrictive umask.
In configuration files (and "git config --color" command line), we
supported one and only one attribute after foreground and background
color. Accept combinations of attributes, e.g.
[diff.color]
old = red reverse bold
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I used to set GREP_OPTIONS to exclude *.orig and *.rej files. But with this
the test t4252-am-options.sh fails because it calls grep with a .rej file:
grep "@@ -1,3 +1,3 @@" file-2.rej
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command "git rebase --whitespace=fix HEAD~<N>" is supposed to
only clean up trailing whitespace, and the expectation is that it
cannot fail.
Unfortunately, if one commit adds a blank line at the end of a file
and a subsequent commit adds more non-blank lines after the blank
line, "git apply" (used indirectly by "git rebase") will fail to apply
the patch of the second commit.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next commit, we will make it possible for blank context
lines to match beyond the end of the file. That means that a hunk
with a preimage that has more lines than present in the file may
be possible to successfully apply. Therefore, we must remove
the quick rejection test in find_pos().
find_pos() will already work correctly without the quick
rejection test, but that might not be obvious. Therefore,
comment the test for handling out-of-range line numbers in
find_pos() and cast the "line" variable to the same (unsigned)
type as img->nr.
What are performance implications of removing the quick
rejection test?
It can only help "git apply" to reject a patch faster. For example,
if I have a file with one million lines and a patch that removes
slightly more than 50 percent of the lines and try to apply that
patch twice, the second attempt will fail slightly faster
with the test than without (based on actual measurements).
However, there is the pathological case of a patch with many
more context lines than the default three, and applying that patch
using "git apply -C1". Without the rejection test, the running
time will be roughly proportional to the number of context lines
times the size of the file. That could be handled by writing
a more complicated rejection test (it would have to count the
number of blanks at the end of the preimage), but I don't find
that worth doing until there is a real-world use case that
would benfit from it.
It would be possible to keep the quick rejection test if
--whitespace=fix is not given, but I don't like that from
a testing point of view.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The use case for --keep option is to remove previous commits unrelated
to the current changes in the working tree. So in this use case we are
not supposed to have unmerged entries. This is why it seems safer to
just disallow using --keep when there are unmerged entries.
And this patch changes the error message when --keep was disallowed and
there were some unmerged entries from:
error: Entry 'file1' would be overwritten by merge. Cannot merge.
fatal: Could not reset index file to revision 'HEAD^'.
to:
fatal: Cannot do a keep reset in the middle of a merge.
which is nicer.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is safer and consistent with "--merge" and "--hard" resets to disallow
"git reset --keep" outside a work tree.
So let's just do that and add some tests while at it.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests have been broken since they were introduced in commits
ca2cedb (git-submodule: add support for --rebase., 2009-04-24) and
42b4917 (git-submodule: add support for --merge., 2009-06-03).
'git submodule init' expects the submodules to exist in the index.
In this case, the submodules don't exist and therefore looking for
the submodules will always fail. To make matters worse, git submodule
fails visibly to the user by saying:
error: pathspec 'rebasing' did not match any file(s) known to git.
Did you forget to 'git add'?
but doesn't return an error code. This allows the test to fail silently.
Fix it by adding the submodules first.
Cc: Johan Herland <johan@herland.net>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Cc: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Has the same functionality as the '--cc' option and 'format.cc'
configuration variable but for the "To:" email header. Half of the code to
support this was already there.
With email the To: header usually more important than the Cc: header.
[jc: tests are by Stephen Boyd]
Signed-off-by: Steven Drake <sdrake@xnet.co.nz>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/maint-fix-pager:
tests: Fix race condition in t7006-pager
t7006-pager: if stdout is not a terminal, make a new one
tests: Add tests for automatic use of pager
am: Fix launching of pager
git svn: Fix launching of pager
git.1: Clarify the behavior of the --paginate option
Make 'git var GIT_PAGER' always print the configured pager
Fix 'git var' usage synopsis
When encountering a dirty submodule while doing "git diff --submodule"
print an extra line for new untracked content and another for modified
but already tracked content. And if the HEAD of the submodule is equal
to the ref diffed against in the superproject, drop the output which
would just show the same SHA1s and no commit message headlines.
To achieve that, the dirty_submodule bitfield is expanded to two bits.
The output of "git status" inside the submodule is parsed to set the
according bits.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All tests in t9119 were disabled for subversion versions other than
1.[45].*. Make the test script run with subversion 1.[456].*.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
* sp/maint-push-sideband:
receive-pack: Send internal errors over side-band #2
t5401: Use a bare repository for the remote peer
receive-pack: Send hook output over side band #2
receive-pack: Wrap status reports inside side-band-64k
receive-pack: Refactor how capabilities are shown to the client
send-pack: demultiplex a sideband stream with status data
run-command: support custom fd-set in async
run-command: Allow stderr to be a caller supplied pipe
Conflicts:
builtin-receive-pack.c
run-command.c
t/t5401-update-hooks.sh
This adds the abbility to specify the conflict marker size for merges outside
a git repository.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/maint-fix-pager:
tests: Fix race condition in t7006-pager
t7006-pager: if stdout is not a terminal, make a new one
tests: Add tests for automatic use of pager
am: Fix launching of pager
git svn: Fix launching of pager
git.1: Clarify the behavior of the --paginate option
Make 'git var GIT_PAGER' always print the configured pager
Fix 'git var' usage synopsis
This commit fixes a bug in processing project-specific override in
a situation when there is no project, e.g. for the projects list page.
When 'snapshot' feature had project specific config override enabled
by putting
$feature{'snapshot'}{'override'} = 1;
(or equivalent) in $GITWEB_CONFIG, and when viewing toplevel gitweb
page, which means the projects list page (to be more exact this
happens for any project-less action), gitweb would put the following
Perl warnings in error log:
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2065.
fatal: error processing config file(s)
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2221.
gitweb.cgi: Use of uninitialized value $git_dir in concatenation (.) or string at gitweb.cgi line 2218.
The problem is in the following fragment of code:
# path to the current git repository
our $git_dir;
$git_dir = "$projectroot/$project" if $project;
# list of supported snapshot formats
our @snapshot_fmts = gitweb_get_feature('snapshot');
@snapshot_fmts = filter_snapshot_fmts(@snapshot_fmts);
For the toplevel gitweb page, which is the list of projects, $project is not
defined, therefore neither is $git_dir. gitweb_get_feature() subroutine
calls git_get_project_config() if project specific override is turned
on... but we don't have project here.
Those errors mentioned above occur in the following fragment of code in
git_get_project_config():
# get config
if (!defined $config_file ||
$config_file ne "$git_dir/config") {
%config = git_parse_project_config('gitweb');
$config_file = "$git_dir/config";
}
git_parse_project_config() calls git_cmd() which has '--git-dir='.$git_dir
There are (at least) three possible solutions:
1. Harden gitweb_get_feature() so that it doesn't call
git_get_project_config() if $project (and therefore $git_dir) is not
defined; there is no project for project specific config.
2. Harden git_get_project_config() like you did in your fix, returning early
if $git_dir is not defined.
3. Harden git_cmd() so that it doesn't add "--git-dir=$git_dir" if $git_dir
is not defined, and change git_get_project_config() so that it doesn't
even try to access $git_dir if it is not defined.
This commit implements both 1.) and 2.), i.e. gitweb_get_feature() doesn't
call project-specific override if $git_dir is not defined (if there is no
project), and git_get_project_config() returns early if $git_dir is not
defined.
Add a test for this bug to t/t9500-gitweb-standalone-no-errors.sh test.
Reported-by: Eli Barzilay <eli@barzilay.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move non-fast forward tests to lib-httpd.sh so that we don't have to
duplicate the tests in both t5540 and t5541.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As reported by Mark Lodato, "git bisect", when it was started with
path parameters that match no commit was kind of working without
taking account of path parameters and was reporting something like:
Bisecting: -1 revisions left to test after this (roughly 0 steps)
It is more correct and safer to just error out in this case, before
displaying the revisions left, so this patch does just that.
Note that this bug is very old, it exists at least since v1.5.5.
And it is possible to detect that case earlier in the bisect
algorithm, but it is not clear that it would be an improvement to
error out earlier, on the contrary it may change the behavior of
"git rev-list --bisect-all" for example, which is currently correct.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for git-am using files with DOS line endings for various
combinations of `--keep-cr`, `--no-keep-cr` and `am.keepcr`.
Signed-off-by: Stefan-W. Hahn <stefan.hahn@s-hahn.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Verify that the output format is correct for successful, rejected, and
flagrantly erroneous pushes.
Signed-off-by: Larry D'Anna <larry@elder-gods.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, if gc.reflogexpire or gc.reflogexpire were set to "never"
or "false", the builtin default values were used instead.
Signed-off-by: Adam Simpkins <simpkins@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, prune treated an expiration time of 0 to mean that no
expire argument was supplied, and everything should be pruned. As a
result, "prune --expire=never" would prune all unreachable objects,
regardless of their timestamp.
prune can be called with --expire=never automatically by gc, when the
gc.pruneExpire configuration is set to "never".
Signed-off-by: Adam Simpkins <simpkins@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If parent J is an ancestor of parent I, then parent J should be
discarded, not I.
Note that J is an ancestor of I if and only if rev-list I..J is emtpy,
which is what we are testing here.
Signed-off-by: Tuomas Suutari <tuomas.suutari@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
When svn:mergeinfo contains two new parents in a specific order and
one is ancestor of the other, it is possible that git-svn discards the
wrong one. The first test case ("commit made to merged branch is
reachable from the merge") proves this.
The second test case ("merging two branches in one commit is detected
correctly") is just for completeness, since there was no test for
merging two (feature) branches to trunk in one commit.
Signed-off-by: Tuomas Suutari <tuomas.suutari@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
A few "svn cp" commands and commit commands were executed in incorrect
order. Therefore some of the desired commits were missing and some
were committed with wrong revision number in the commit message. This
made it hard to compare the produced git repository with the SVN
repository.
The dump file is updated too, but only the relevant parts and with
hand-edited timestamps to make history linear.
Signed-off-by: Tuomas Suutari <tuomas.suutari@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Requires a small change to wrap-for-bin.sh in order to work.
Signed-off-by: Steven Drake <sdrake@xnet.co.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, the equivalent of "/dev/null" is "nul". This implements
compatibility wrappers around fopen() and freopen() that check for this
particular file name.
The new tests exercise code paths where this is relevant.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is required on Windows because git-notes is now a built-in
rather than a shell script.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since "git fetch" learned "--all" and "--multiple" options, it has become
tempting for users to say "git pull --all". Even though it may fetch from
remotes that do not need to be fetched from for merging with the current
branch, it is handy.
"git fetch" however clears the list of fetched branches every time it
contacts a different remote. Unless the current branch is configured to
merge with a branch from a remote that happens to be the last in the list
of remotes that are contacted, "git pull" that fetches from multiple
remotes will not be able to find the branch it should be merging with.
Make "fetch" clear FETCH_HEAD (unless --append is given) and then append
the list of branches fetched to it (even when --append is not given). That
way, "pull" will be able to find the data for the branch being merged in
FETCH_HEAD no matter where the remote appears in the list of remotes to be
contacted by "git fetch".
Reported-by: Michael Lukashov
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running a subfetch, the code propagated some options but not others.
Propagate --force, --update-head-ok and --keep options as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of these tests were bogus, as they created new directory and tried to
run "git pull" without even running "git init" in there. They were mucking
with the repository in $TEST_DIRECTORY.
While fixing it, modernize the style not to chdir around outside of
subshell. Otherwise a failed test will take us to an unexpected directory
and we need to chdir back to the test directory in each test, which is
ugly and error prone.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we look at a patch for adding hunks interactively, we
first split it into a header and a list of hunks. Some of
the header lines, such as mode changes and deletion, however,
become their own selectable hunks. Later when we reassemble
the patch, we simply concatenate the header and the selected
hunks. This leads to patches like this:
diff --git a/file b/file
index d95f3ad..0000000
--- a/file
+++ /dev/null
deleted file mode 100644
@@ -1 +0,0 @@
-content
Notice how the deletion comes _after_ the ---/+++ lines,
when it should come before.
In many cases, we can get away with this as git-apply
accepts the slightly bogus input. However, in the specific
case of a deletion line that is being applied via "apply
-R", this malformed patch triggers an assert in git-apply.
This comes up when discarding a deletion via "git checkout
-p".
Rather than try to make git-apply accept our odd input,
let's just reassemble the patch in the correct order.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to unnecessarily give the read permission to group and others,
regardless of the umask, which isn't serious because the objects are
still protected by their containing directory, but isn't necessary
either.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to create 0600 files, and then use chmod to set the group and
other permission bits to the umask. This usually has the same effect
as a normal file creation with a umask.
But in the presence of ACLs, the group permission plays the role of
the ACL mask: the "g" bits of newly created files are chosen according
to default ACL mask of the directory, not according to the umask, and
doing a chmod() on these "g" bits affect the ACL's mask instead of
actual group permission.
In other words, creating files with 0600 and then doing a chmod to the
umask creates files which are unreadable by users allowed in the
default ACL. To create the files without breaking ACLs, we let the
umask do it's job at the file's creation time, and get rid of the
later chmod.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now, Git creates unreadable pack files on non-shared
repositories when the user has a umask of 077, even when the default
ACLs for the directory would give read/write access to a specific
user.
Loose object files are created world-readable, which doesn't break ACLs,
but isn't necessarily desirable.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pagers that do not consume their input are dangerous: for example,
$ GIT_PAGER=: git log
$ echo $?
141
$
The only reason these tests were able to work before was that
'git log' would write to the pipe (and not fill it) before the
pager had time to terminate and close the pipe.
Fix it by using a program that consumes its input, namely wc (as
suggested by Johannes).
Reported-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds two test cases for:
6977c25 git diff --quiet -w: check and report the status
Signed-off-by: Larry D'Anna <larry@elder-gods.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/push-sideband:
receive-pack: Send internal errors over side-band #2
t5401: Use a bare repository for the remote peer
receive-pack: Send hook output over side band #2
receive-pack: Wrap status reports inside side-band-64k
receive-pack: Refactor how capabilities are shown to the client
send-pack: demultiplex a sideband stream with status data
run-command: support custom fd-set in async
run-command: Allow stderr to be a caller supplied pipe
Testing pagination requires (fake or real) access to a terminal so we
can see whether the pagination automatically kicks in, which makes it
hard to get good coverage when running tests without --verbose. There
are a number of ways to work around that:
- Replace all isatty calls with calls to a custom xisatty wrapper
that usually checks for a terminal but can be overridden for tests.
This would be workable, but it would require implementing xisatty
separately in three languages (C, shell, and perl) and making sure
that any code that is to be tested always uses the wrapper.
- Redirect stdout to /dev/tty. This would be problematic because
there might be no terminal available, and even if a terminal is
available, it might not be appropriate to spew output to it.
- Create a new pseudo-terminal on the fly and capture its output.
This patch implements the third approach.
The new test-terminal.perl helper uses IO::Pty from Expect.pm to create
a terminal and executes the program specified by its arguments with
that terminal as stdout. If the IO::Pty module is missing or not
working on a system, the test script will maintain its old behavior
(skipping most of its tests unless GIT_TEST_OPTS includes --verbose).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-p4: fix bug in symlink handling
t1450: fix testcases that were wrongly expecting failure
Documentation: Fix indentation problem in git-commit(1)
Git’s automatic pagination support has some subtleties. Add some
tests to make sure we don’t break:
- when git will use a pager by default;
- the effect of the --paginate and --no-pager options;
- the effect of pagination on use of color;
- how the choice of pager is configured.
This does not yet test:
- use of pager by scripted commands (git svn and git am);
- effect of the pager.* configuration variables;
- setting of the LESS variable.
Some features involve checking whether stdout is a terminal, so many
of these tests are skipped unless output is passed through to the
terminal (i.e., unless $GIT_TEST_OPTS includes --verbose).
The immediate purpose for these tests was to avoid making things worse
after the breakage from my jn/editor-pager series (see commit 376f39,
2009-11-20). Thanks to Sebastian Celis <sebastian@sebastiancelis.com>
for the report.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Almost exactly a year ago in 02a6552 (Test fsck a bit harder), I
introduced two testcases that were expecting failure.
However, the only bug was that the testcases wrote *blobs* because I
forgot to pass -t tag to hash-object. Fix this, and then adjust the
rest of the test to properly check the result.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we remove a path in a/deep/subdirectory, we should try to
remove as many trailing components as possible (i.e.,
subdirectory, then deep, then a). However, the test for the
return value of rmdir was reversed, so we only ever deleted
at most one level.
The fix is in remove_path, so "apply" and "merge-recursive"
also are fixed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When invoking "git submodule summary" in an empty repo (which can be
indirectly done by setting status.submodulesummary = true), it currently
emits an error message (via "git diff-index") since HEAD points to an
unborn branch.
This patch adds handling of the HEAD-points-to-unborn-branch special case,
so that "git submodule summary" no longer emits this error message.
The patch also adds a test case that verifies the fix.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration is meant to suppliment --decorate command line option
that can be used as a boolean to turn the feature on, so it is natural
to expect
[log]
decorate
decorate = yes
to work. The original commit would segfault with the first one, and
would not understand the second one.
Once a user has this configuration in ~/.gitconfig, there needs to be a
way to override it from the command line. Add --no-decorate option to
log family and also allow --decorate=no to mean the same thing. Since
we allow setting log.decorate to 'true', the command line also should
accept --decorate=yes and behave accordingly.
New tests in t4202 are designed to exercise the interaction between the
configuration variable and the command line option that overrides it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test for 'git add -u pathspec' and 'git add pathspec' where
pathspec does not exist. The expected result is that git add exits with
an error message and an appropriate exit code.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Prepare 1.7.0.1 release notes
Fix use of mutex in threaded grep
dwim_ref: fix dangling symref warning
stash pop: remove 'apply' options during 'drop' invocation
diff: make sure --output=/bad/path is caught
Remove hyphen from "git-command" in two error messages
* maint-1.6.6:
dwim_ref: fix dangling symref warning
stash pop: remove 'apply' options during 'drop' invocation
diff: make sure --output=/bad/path is caught
Remove hyphen from "git-command" in two error messages
This kind of test requires a throw-away root filesystem so that it can
play on. If you have such a system, go ahead, "chmod 777 /" and run
this test manually. Because this is a dangerous test, you are required
to set an env variable, and not to use root to run it.
Script prepare-root.sh may help you set up a chroot environment with
Git test suite inside. You will need Linux, static linked busybox,
rsync and root permission to use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git stash pop' option parsing used to remove the first argument
in --index mode. At the time this was implemented, this first
argument was always --index. However, since the invention of the -q
option in fcdd0e9 (stash: teach quiet option, 2009-06-17) you can
cause an internal invocation of
git stash drop --index
by running
git stash pop -q --index
which then of course fails because drop doesn't know --index.
To handle this, instead let 'git stash apply' decide what the future
argument to 'drop' should be.
Warning: this means that 'git stash apply' must parse all options that
'drop' can take, and deal with them in the same way. This is
currently true for its only option -q.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is useful for keeping notes to objects that are being rewritten by e.g.
'git commit --amend', 'git rebase', or 'git cherry-pick'.
"git notes copy <from> <to>" is in practice equivalent to
"git notes add -C $(git notes list <from>) <to>", although it is somewhat
more convenient for regular users.
"git notes copy" takes the same -f option as "git add", to overwrite existing
notes at the target (instead of aborting with an error message).
If the <from>-object has no notes, "git notes copy" will abort with an error
message.
The patch includes tests verifying correct behaviour of the new subcommand.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inspired by the -c/-C options to "git commit", we teach these options to
"git notes add/append" to allow reuse of note objects.
With this patch in place, it is now easy to copy or move notes between
objects. For example, to copy object A's notes to object B:
git notes add [-f] -C $(git notes list A) B
To move instead of copying, you simply remove the notes from the source
object afterwards, e.g.:
git notes remove A
The patch includes tests verifying correct behaviour of the new functionality.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By moving the -F option handling into a separate function (parse_file_arg),
we can start allowing several -F options, and mixed usage of -m and -F
options. Each -m/-F given appends to the note message, in the order they are
given on the command-line.
The patch includes tests verifying correct behaviour of the new functionality.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The semantics for "git notes edit -m/-F" overlap with those for
"git notes add -f", and the behaviour (i.e. overwriting existing
notes with the given message/file) is more intuitively captured
by (and better documented with) "git notes add -f".
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git notes append" is equivalent to "git notes edit" except that instead
of editing existing notes contents, you can only append to it. This is
useful for quickly adding annotations like e.g.:
git notes append -m "Acked-by: A U Thor <author@example.com>"
"git notes append" takes the same -m/-F options as "git notes add".
If there is no existing note to append to, "git notes append" is identical
to "git notes add" (i.e. it adds a new note).
The patch includes tests verifying correct behaviour of the new subcommand.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git notes add" is identical to "git notes edit" except that instead of
editing existing notes for a given object, you can only add notes to an
object that currently has none. If "git notes add" finds existing notes
for the given object, the addition is aborted. However, if the new
-f/--force option is used, "git notes add" will _overwrite_ the existing
notes with the new notes contents.
If there is no existing notes for the given object. "git notes add" is
identical to "git notes edit" (i.e. it adds a new note).
The patch includes tests verifying correct behaviour of the new subcommand.
Suggested-by: Joey Hess <joey@kitenet.net>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git notes list" will list all note objects in the current notes ref (in the
format "<note object> <annotated object>"). "git notes list <object>" will
list the note object associated with the given <object>, or fail loudly if
the given <object> has no associated notes.
If no arguments are given to "git notes", it defaults to the "list"
subcommand. This is for pseudo-compatibility with "git tag" and "git branch".
The patch includes tests verifying correct behaviour of the new subcommand.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git notes prune" will remove all notes that annotate unreachable/non-
existing objects.
The patch includes tests verifying correct behaviour of the new subcommand.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using "git notes remove" is equivalent to specifying an empty note message.
The patch includes tests verifying correct behaviour of the new subcommand.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the result of editing a note is an empty string, the associated note
entry should be deleted from the notes tree.
This allows deleting notes by invoking either "git notes -m ''" or
"git notes -F /dev/null".
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The note tree structure allows for non-note entries to coexist with note
entries in a notes tree. Although we certainly expect there to be very
few non-notes in a notes tree, we should still support them to a certain
degree.
This patch teaches the notes code to preserve non-notes when updating the
notes tree with write_notes_tree(). Non-notes are not affected by fanout
restructuring.
For non-notes to be handled correctly, we can no longer allow subtree
entries that do not match the fanout structure produced by the notes code
itself. This means that fanouts like 4/36, 6/34, 8/32, 4/4/32, etc. are
no longer recognized as note subtrees; only 2-based fanouts are allowed
(2/38, 2/2/36, 2/2/2/34, etc.). Since the notes code has never at any point
_produced_ non-2-based fanouts, it is highly unlikely that this change will
cause problems for anyone.
The patch also adds some tests verifying the correct handling of non-notes
in a notes tree.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test verifying that the notes code automatically restructures the
notes tree into a deeper fanout level, when many notes are added with
"git notes".
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adds a testcase verifying that git-notes works successfully on
tree, blob, and tag objects.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The builtin-ification includes some minor behavioural changes to the
command-line interface: It is no longer allowed to mix the -m and -F
arguments, and it is not allowed to use multiple -F options.
As part of the builtin-ification, we add the commit_notes() function
to the builtin API. This function (together with the notes.h API) can
be easily used from other builtins to manipulate the notes tree.
Also includes needed changes to t3301.
This patch has been improved by the following contributions:
- Stephen Boyd: Use die() instead of fprintf(stderr, ...) followed by exit(1)
Cc: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
