Add git_project_index, which generates index.aux file that can be used
as a source of projects list, instead of generating projects list from
a directory. Using file as a source of projects list allows for some
projects to be not present in gitweb main (project_list) page, and/or
correct project owner info. And is probably faster.
Additionally it can be used to get the list of all available repositories
for scripts (in easily parseable form).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is in response to Linus's work on packed refs. Additionally it
makes gitweb work with symrefs, too.
Do not parse refs by hand, using File::Find and reading individual
heads to get hash of reference, but use git-peek-remote output
instead. Assume that the hash for deref (with ^{}) always follows hash
for ref, and that we have derefs only for tag objects; this removes
call to git_get_type (and git-cat-file -t invocation) for tags, which
speeds "summary" and "tags" views generation, but might slow generation
of "heads" view a bit. For now, we do not save and use the deref hash.
Remove git_get_hash_by_ref while at it, as git_get_refs_list was the
only place it was used.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier code to get list of projects when $projects_list is a
directory (e.g. when it is equal to $projectroot) had a hardcoded flat
(one level) list of directories. Allow for projects to be in
subdirectories also for $projects_list being a directory by using
File::Find.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
describe, git: Handle argc==0 case the same way as argc==1.
merge-tree: Refuse excessive arguments.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It turns out that I actually wanted to avoid the filenames (because I
didn't care - I just wanted to see the context in which something was
used) when doing a grep. But since "git grep" didn't take the "-h"
parameter, I ended up having to do "grep -5 -h *.c" instead.
So here's a trivial patch that adds "-h" (and thus has to enable -H too)
to "git grep" parsing.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds trivial support for cloning and fetching via ftp://.
Signed-off-by: Sasha Khapyorsky <sashak@voltaire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Call setup_git_directory() to make these commands work in subdirectory.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The code called this operation "desperate" but the option flag is -r
and the word "recover" describes what it does better.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fetch over http from a repository that uses alternates to borrow
from neighbouring repositories were quite broken, apparently for
some time now.
We parse input and count bytes to allocate the new buffer, and
when we copy into that buffer we know exactly how many bytes we
want to copy from where. Using strlcpy for it was simply
stupid, and the code forgot to take it into account that strlcpy
terminated the string with NUL.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fetch over http from a repository that uses alternates to borrow
from neighbouring repositories were quite broken, apparently for
some time now.
We parse input and count bytes to allocate the new buffer, and
when we copy into that buffer we know exactly how many bytes we
want to copy from where. Using strlcpy for it was simply
stupid, and the code forgot to take it into account that strlcpy
terminated the string with NUL.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git_connect() can return 0 if we use git protocol for example.
Users of this function don't know and don't care if a process
had been created or not, and to avoid them to check it before
calling finish_connect() this patch allows finish_connect() to
take a null pid. And in that case return 0.
[jc: updated function signature of git_connect() with a comment on
its return value. ]
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use "add_to_string" instead of "sq_quote" and "snprintf", so
that there is no memory allocation and no memory leak.
Also check if the command is too long to fit into the buffer
and die if this is the case, instead of truncating it to the
buffer size.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
So that this function may be used in places other than "rsh.c".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git_history output is now divided into pages, like git_shortlog,
git_tags and git_heads output. As whole git-rev-list output is now
read into array before writing anything, it allows for better
signaling of errors.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As pickaxe search (selected using undocumented 'pickaxe:' operator in
search query) is resource consuming, allow to turn it on/off using
feature meachanism. Turned on by default, for historical reasons.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The function appeared high on a gprof output for a rev-list run of
a non-trivial size, and it was an obvious low-hanging fruit.
The code is from Linus.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add generated file config.cache (default cache file, when running
./configure with -C, --config-cache option) to the list of ignored
files.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add support for ./configure options --without-iconv (if neither libc
nor libiconv properly support iconv), and for --with-iconv=PATH (to
set prefix to libiconv library and headers, used only when
NEED_LIBICONV is set). While at it, make ./configure set or unset
NO_ICONV always (it is not autodetected in Makefile).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Historically we did not allow binary patch applied without an
explicit permission from the user, and this flag was the way to
do so. This makes the flag a no-op by always allowing binary
patch application.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we are generating packs to update remote repositories we
want to supply as much information as possible about the revisions
that already exist to rev-list in order optimise the pack as much
as possible. We need to pass two revisions for each branch we are
updating in the remote repository and one for each additional branch.
Where the remote repository has numerous branches we can run out
of command line space to pass them.
Utilise the git-rev-list --stdin mode to allow unlimited numbers
of revision constraints. This allows us to move back to the much
simpler unordered revision selection code.
[jc: added some comments in the code to describe the pipe flow
a bit.]
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reverts parts of commit 74c0cc2 and part of commit 355f541.
Franck and Rene are working on a unified upload-archive which
would supersede this when done, so better not to get in their
way.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Avoid failing when cwd is !writable by writing the
packfiles in $GIT_DIR, which is more in line with other commands.
Without this, git-repack was failing when run from crontab
by non-root user accounts. For large repositories, this
also makes the mv operation a lot cheaper, and avoids leaving
temp packfiles around the fs upon failure.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When --stdin option is given, in addition to the <rev>s listed
on the command line, the command can read one rev parameter per
line from the standard input. The list of revs ends at the
first empty line or EOF.
Note that you still have to give all the flags from the command
line; only rev arguments (including A..B, A...B, and A^@ notations)
can be give from the standard input.
Signed-off-by: Junio C Hamano <junkio@cox.net>
setup_revisions() wants to get all the parameters at once and
then postprocesses the resulting revs structure after it is done
with them. This code structure is a bit cumbersome to deal with
efficiently when we want to inject revision parameters from the
side (e.g. read from standard input).
Fortunately, the nature of this postprocessing is not affected by
revision parameters; they are affected only by flags. So it is
Ok to do add_object() after the it returns.
This splits out the code that deals with the revision parameter
out of the main loop of setup_revisions(), so that we can later
call it from elsewhere after it returns.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some memory was allocated for a new path but not freed
after the path was used.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When build a pack for a push we query the remote copy for existant
heads. These are used to prune unnecessary objects from the pack.
As we receive the remote references in get_remote_heads() we validate
the reference names via check_ref() which includes a length check;
rejecting those >45 characters in size.
This is a miss converted change, it was originally designed to reject
messages which were less than 45 characters in length (a 40 character
sha1 and refs/) to prevent comparing unitialised memory. check_ref()
now gets the raw length so check for at least 5 characters.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This implements a 3-way diff between the HEAD commit, the state in the
index, and the working directory. This is like the n-way diff for a
merge, and uses much of the same code. It is invoked with the -c flag
to git-diff-index, which it already accepted and did nothing with.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/pack:
more lightweight revalidation while reusing deflated stream in packing
pack-objects: fix thinko in revalidate code
pack-objects: re-validate data we copy from elsewhere.
Add custom test for checking if Python comes with subprocess.py, or
should we use our own subprocess.py by defining WITH_OWN_SUBPROCESS_PY.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Divide page path into directories, so that each part of path links to
the "tree" view of the $hash_base (or HEAD, if $hash_base is not set)
version of the directory.
If the entity is blob, final part (basename) links to $hash_base or
HEAD revision of the "raw" blob ("blob_plain" view). If the entity is
tree, link to the "tree" view.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If you try to fsck a repository that isn't entirely empty, but that has no
inter-object references (ie all the objects are blobs, and don't refer to
anything else), git-fsck-objects currently fails.
This probably cannot happen in practice, but can be tested with something
like
git init-db
touch dummy
git add dummy
git fsck-objects
where the fsck will die by a divide-by-zero when it tries to look up the
references from the one object it found (hash_obj() will do a modulus by
refs_hash_size).
On some other archiectures (ppc, sparc) the divide-by-zero will go
unnoticed, and we'll instead SIGSEGV when we hit the "refs_hash[j]"
access.
So move the test that should protect against this from mark_reachable()
into lookup_object_refs(), which incidentally in the process also fixes
mark_reachable() itself (it used to not mark the one object that _was_
reachable, because it decided that it had no refs too early).
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The command unpack-objects dies upon the first error. This is
probably considered a feature -- if a pack is corrupt, instead
of trying to extract from it and possibly risking to contaminate
a good repository with objects whose validity is dubious, we
should seek a good copy of the pack and retry. However, we may
not have any good copy anywhere. This implements the last
resort effort to extract what are salvageable from such a
corrupt pack.
This flag might have helped Sergio when recovering from a
corrupt pack. In my test, it managed to salvage 247 objects out
of a pack that had 251 objects but without it the command
stopped after extracting 73 objects.
Signed-off-by: Junio C Hamano <junkio@cox.net>
