Transports that do not support protocol v2 did not correctly fall
back to protocol v0 under certain conditions, which has been
corrected.
* jk/fix-proto-downgrade-to-v0:
git_connect(): fix corner cases in downgrading v2 to v0
There's code in git_connect() that checks whether we are doing a push
with protocol_v2, and if so, drops us to protocol_v0 (since we know
how to do v2 only for fetches). But it misses some corner cases:
1. it checks the "prog" variable, which is actually the path to
receive-pack on the remote side. By default this is just
"git-receive-pack", but it could be an arbitrary string (like
"/path/to/git receive-pack", etc). We'd accidentally stay in v2
mode in this case.
2. besides "receive-pack" and "upload-pack", there's one other value
we'd expect: "upload-archive" for handling "git archive --remote".
Like receive-pack, this doesn't understand v2, and should use the
v0 protocol.
In practice, neither of these causes bugs in the real world so far. We
do send a "we understand v2" probe to the server, but since no server
implements v2 for anything but upload-pack, it's simply ignored. But
this would eventually become a problem if we do implement v2 for those
endpoints, as older clients would falsely claim to understand it,
leading to a server response they can't parse.
We can fix (1) by passing in both the program path and the "name" of the
operation. I treat the name as a string here, because that's the pattern
set in transport_connect(), which is one of our callers (we were simply
throwing away the "name" value there before).
We can fix (2) by allowing only known-v2 protocols ("upload-pack"),
rather than blocking unknown ones ("receive-pack" and "upload-archive").
That will mean whoever eventually implements v2 push will have to adjust
this list, but that's reasonable. We'll do the safe, conservative thing
(sticking to v0) by default, and anybody working on v2 will quickly
realize this spot needs to be updated.
The new tests cover the receive-pack and upload-archive cases above, and
re-confirm that we allow v2 with an arbitrary "--upload-pack" path (that
already worked before this patch, of course, but it would be an easy
thing to break if we flipped the allow/block logic without also handling
"name" separately).
Here are a few miscellaneous implementation notes, since I had to do a
little head-scratching to understand who calls what:
- transport_connect() is called only for git-upload-archive. For
non-http git remotes, that resolves to the virtual connect_git()
function (which then calls git_connect(); confused yet?). So
plumbing through "name" in connect_git() covers that.
- for regular fetches and pushes, callers use higher-level functions
like transport_fetch_refs(). For non-http git remotes, that means
calling git_connect() under the hood via connect_setup(). And that
uses the "for_push" flag to decide which name to use.
- likewise, plumbing like fetch-pack and send-pack may call
git_connect() directly; they each know which name to use.
- for remote helpers (including http), we already have separate
parameters for "name" and "exec" (another name for "prog"). In
process_connect_service(), we feed the "name" to the helper via
"connect" or "stateless-connect" directives.
There's also a "servpath" option, which can be used to tell the
helper about the "exec" path. But no helpers we implement support
it! For http it would be useless anyway (no reasonable server
implementation will allow you to send a shell command to run the
server). In theory it would be useful for more obscure helpers like
remote-ext, but even there it is not implemented.
It's tempting to get rid of it simply to reduce confusion, but we
have publicly documented it since it was added in fa8c097cc9
(Support remote helpers implementing smart transports, 2009-12-09),
so it's possible some helper in the wild is using it.
- So for v2, helpers (again, including http) are mainly used via
stateless-connect, driven by the main program. But they do still
need to decide whether to do a v2 probe. And so there's similar
logic in remote-curl.c's discover_refs() that looks for
"git-receive-pack". But it's not buggy in the same way. Since it
doesn't support servpath, it is always dealing with a "service"
string like "git-receive-pack". And since it doesn't support
straight "connect", it can't be used for "upload-archive".
So we could leave that spot alone. But I've updated it here to match
the logic we're changing in connect_git(). That seems like the least
confusing thing for somebody who has to touch both of these spots
later (say, to add v2 push support). I didn't add a new test to make
sure this doesn't break anything; we already have several tests (in
t5551 and elsewhere) that make sure we are using v2 over http.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to replace includes of cache.h with includes of the much
smaller alloc.h in many places. It does mean that we also need to add
includes of alloc.h in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.35:
Git 2.35.7
Git 2.34.7
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
Git 2.33.7
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
* maint-2.34:
Git 2.34.7
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
Git 2.33.7
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
The IOCTLFUNCTION option has been deprecated, and generates a compiler
warning in recent versions of curl. We can switch to using SEEKFUNCTION
instead. It was added in 2008 via curl 7.18.0; our INSTALL file already
indicates we require at least curl 7.19.4.
But there's one catch: curl says we should use CURL_SEEKFUNC_{OK,FAIL},
and those didn't arrive until 7.19.5. One workaround would be to use a
bare 0/1 here (or define our own macros). But let's just bump the
minimum required version to 7.19.5. That version is only a minor version
bump from our existing requirement, and is only a 2 month time bump for
versions that are almost 13 years old. So it's not likely that anybody
cares about the distinction.
Switching means we have to rewrite the ioctl functions into seek
functions. In some ways they are simpler (seeking is the only
operation), but in some ways more complex (the ioctl allowed only a full
rewind, but now we can seek to arbitrary offsets).
Curl will only ever use SEEK_SET (per their documentation), so I didn't
bother implementing anything else, since it would naturally be
completely untested. This seems unlikely to change, but I added an
assertion just in case.
Likewise, I doubt curl will ever try to seek outside of the buffer sizes
we've told it, but I erred on the defensive side here, rather than do an
out-of-bounds read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The IOCTLFUNCTION option has been deprecated, and generates a compiler
warning in recent versions of curl. We can switch to using SEEKFUNCTION
instead. It was added in 2008 via curl 7.18.0; our INSTALL file already
indicates we require at least curl 7.19.4.
But there's one catch: curl says we should use CURL_SEEKFUNC_{OK,FAIL},
and those didn't arrive until 7.19.5. One workaround would be to use a
bare 0/1 here (or define our own macros). But let's just bump the
minimum required version to 7.19.5. That version is only a minor version
bump from our existing requirement, and is only a 2 month time bump for
versions that are almost 13 years old. So it's not likely that anybody
cares about the distinction.
Switching means we have to rewrite the ioctl functions into seek
functions. In some ways they are simpler (seeking is the only
operation), but in some ways more complex (the ioctl allowed only a full
rewind, but now we can seek to arbitrary offsets).
Curl will only ever use SEEK_SET (per their documentation), so I didn't
bother implementing anything else, since it would naturally be
completely untested. This seems unlikely to change, but I added an
assertion just in case.
Likewise, I doubt curl will ever try to seek outside of the buffer sizes
we've told it, but I erred on the defensive side here, rather than do an
out-of-bounds read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future change will want a way to download a file over HTTP(S) using
the simplest of download mechanisms. We do not want to assume that the
server on the other side understands anything about the Git protocol but
could be a simple static web server.
Create the new 'get' capability for the remote helpers which advertises
that the 'get' command is avalable. A caller can send a line containing
'get <url> <path>' to download the file at <url> into the file at
<path>.
Reviewed-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git server end's ability to accept Accept-Language header was introduced
in f18604bbf2 (http: add Accept-Language header if possible, 2015-01-28),
but this is only used by very early phase of the transfer, which is HTTP
GET request to discover references. For other phases, like POST request
in the smart HTTP, the server does not know what language the client
speaks.
Teach git client to learn end-user's preferred language and throw
accept-language header to the server side. Once the server gets this header,
it has the ability to talk to end-user with language they understand.
This would be very helpful for many non-English speakers.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Li Linchao <lilinchao@oschina.cn>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch --refetch" learned to fetch everything without telling
the other side what we already have, which is useful when you
cannot trust what you have in the local object store.
* rc/fetch-refetch:
docs: mention --refetch fetch option
fetch: after refetch, encourage auto gc repacking
t5615-partial-clone: add test for fetch --refetch
fetch: add --refetch option
builtin/fetch-pack: add --refetch option
fetch-pack: add refetch
fetch-negotiator: add specific noop initializer
Add a refetch option to fetch-pack to force a full fetch. Use when
applying a new partial clone filter to refetch all matching objects.
Signed-off-by: Robert Coup <robert@coup.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug a trivial memory leak in code added in a2d725b7bd (Use an
external program to implement fetching with curl, 2009-08-05).
To do this have the cmd_main() use a "goto cleanup" pattern, and to
return an error of 1 unless we can fall through to the http_cleanup()
at the end.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Migrate those run-command API users that assign directly to the "argv"
member to use a strvec_pushv() of "args" instead.
In these cases it did not make sense to further refactor these
callers, e.g. daemon.c could be made to construct the arguments closer
to handle(), but that would require moving the construction from its
cmd_main() and pass "argv" through two intermediate functions.
It would be possible for a change like this to introduce a regression
if we were doing:
cp.argv = argv;
argv[1] = "foo";
And changed the code, as is being done here, to:
strvec_pushv(&cp.args, argv);
argv[1] = "foo";
But as viewing this change with the "-W" flag reveals none of these
functions modify variable that's being pushed afterwards in a way that
would introduce such a logic error.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function was added in 4981fe750b (pkt-line: share
buffer/descriptor reading implementation, 2013-02-23), but in
01f9ec64c8 (Use packet_reader instead of packet_read_line,
2018-12-29) the code that was using it was removed.
Since it's being removed we can in turn remove the "src" and "src_len"
arguments to packet_read(), all the remaining users just passed a
NULL/NULL pair to it.
That function is only a thin wrapper for packet_read_with_status()
which still needs those arguments, but for the thin packet_read()
convenience wrapper we can do away with it for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove this function left over to accommodate in-flight changes, see
770fedaf9f (string-list.[ch]: add a string_list_init_{nodup,dup}(),
2021-07-01) for the recent change to add
"string_list_init_{nodup,dup}()" initializers.
There was only one user of the API left in remote-curl.c. I don't know
why I didn't include this change to remote-curl.c in
bc40dfb10a (string-list.h users: change to use *_{nodup,dup}(),
2021-07-01), perhaps I just missed it.
In any case, let's change that one user to use the new API, as of
writing this there are no in-flight changes that use, so this seems
like a good time to drop this before we get any new users of this
compatibility API.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the error shown when a http.pinnedPubKey doesn't match to point
the http.pinnedPubKey variable added in aeff8a6121 (http: implement
public key pinning, 2016-02-15), e.g.:
git -c http.pinnedPubKey=sha256/someNonMatchingKey ls-remote https://github.com/git/git.git
fatal: unable to access 'https://github.com/git/git.git/' with http.pinnedPubkey configuration: SSL: public key does not match pinned public key!
Before this we'd emit the exact same thing without the " with
http.pinnedPubkey configuration". The advantage of doing this is that
we're going to get a translated message (everything after the ":" is
hardcoded in English in libcurl), and we've got a reference to the
git-specific configuration variable that's causing the error.
Unfortunately we can't test this easily, as there are no tests that
require https:// in the test suite, and t/lib-httpd.sh doesn't know
how to set up such tests. See [1] for the start of a discussion about
what it would take to have divergent "t/lib-httpd/apache.conf" test
setups. #leftoverbits
1. https://lore.kernel.org/git/YUonS1uoZlZEt+Yd@coredump.intra.peff.net/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support for ancient versions of cURL library (pre 7.19.4) has been
dropped.
* ab/http-drop-old-curl:
http: rename CURLOPT_FILE to CURLOPT_WRITEDATA
http: drop support for curl < 7.19.3 and < 7.17.0 (again)
http: drop support for curl < 7.19.4
http: drop support for curl < 7.16.0
http: drop support for curl < 7.11.1
The CURLOPT_FILE name is an alias for CURLOPT_WRITEDATA, the
CURLOPT_WRITEDATA name has been preferred since curl 7.9.7, released
in May 2002[1].
1. https://curl.se/libcurl/c/CURLOPT_WRITEDATA.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the last commit we dropped support for curl < 7.11.1, let's
continue that and drop support for versions older than 7.16.0. This
allows us to get rid of some now-obsolete #ifdefs.
Choosing 7.16.0 is a somewhat arbitrary cutoff:
1. It came out in October of 2006, almost 15 years ago.
Besides being a nice round number, around 10 years is
a common end-of-life support period, even for conservative
distributions.
2. That version introduced the curl_multi interface, which
gives us a lot of bang for the buck in removing #ifdefs
RHEL 5 came with curl 7.15.5[1] (released in August 2006). RHEL 5's
extended life cycle program ended on 2020-11-30[1]. RHEL 6 comes with
curl 7.19.7 (released in November 2009), and RHEL 7 comes with
7.29.0 (released in February 2013).
1. http://lore.kernel.org/git/873e1f31-2a96-5b72-2f20-a5816cad1b51@jupiterrise.com
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop support for this ancient version of curl and simplify the code by
allowing us get rid of some "#ifdef"'s.
Git will not build with vanilla curl older than 7.11.1 due our use of
CURLOPT_POSTFIELDSIZE in 37ee680d9b
(http.postbuffer: allow full range of ssize_t values,
2017-04-11). This field was introduced in curl 7.11.1.
We could solve these compilation problems with more #ifdefs,
but it's not worth the trouble. Version 7.11.1 came out in
March of 2004, over 17 years ago. Let's declare that too old
and drop any existing ifdefs that go further back. One
obvious benefit is that we'll have fewer conditional bits
cluttering the code.
This patch drops all #ifdefs that reference older versions
(note that curl's preprocessor macros are in hex, so we're
looking for 070b01, not 071101).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 0181b600a6 (pkt-line: define PACKET_READ_RESPONSE_END, 2020-05-19),
the Response End packet was defined for Git's network protocol. When the
patch was sent, it included an oversight where the error messages
referenced "stateless separator", the work-in-progress name, over
"response end", the final name chosen.
Correct these error messages by having them correctly reference
a "response end" packet.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The remote-https process needs to update it's own instance of
`the_repository' when it sees an HTTP(S) remote is using sha256.
Without this, parse_oid_hex() fails to handle sha256 OIDs when
it's eventually called by parse_fetch().
Tested with:
git clone https://yhbt.net/sha256test.git
GIT_SMART_HTTP=0 git clone https://yhbt.net/sha256test.git
(plain http:// also works)
Cloning the URL via git:// required no changes
Signed-off-by: Eric Wong <e@80x24.org>
Acked-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit added the necessary machinery to implement the
"--force-if-includes" protection, when "--force-with-lease" is used
without giving exact object the remote still ought to have. Surface
the feature by adding a command line option and a configuration
variable to enable it.
- Add a flag: "TRANSPORT_PUSH_FORCE_IF_INCLUDES" to indicate that the
new option was passed from the command line of via configuration
settings; update command line and configuration parsers to set the
new flag accordingly.
- Introduce a new configuration option "push.useForceIfIncludes", which
is equivalent to setting "--force-if-includes" in the command line.
- Update "remote-curl" to recognize and pass this option to "send-pack"
when enabled.
- Update "advise" to catch the reject reason "REJECT_REF_NEEDS_UPDATE",
set when the ref status is "REF_STATUS_REJECT_REMOTE_UPDATED" and
(optionally) print a help message when the push fails.
- The new option is a "no-op" in the following scenarios:
* When used without "--force-with-lease".
* When used with "--force-with-lease", and if the expected commit
on the remote side is specified as an argument.
Signed-off-by: Srinidhi Kaushik <shrinidhi.kaushik@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updates to on-demand fetching code in lazily cloned repositories.
* jt/lazy-fetch:
fetch: no FETCH_HEAD display if --no-write-fetch-head
fetch-pack: remove no_dependents code
promisor-remote: lazy-fetch objects in subprocess
fetch-pack: do not lazy-fetch during ref iteration
fetch: only populate existing_refs if needed
fetch: avoid reading submodule config until needed
fetch: allow refspecs specified through stdin
negotiator/noop: add noop fetch negotiator
88e2f9ed8e ("introduce fetch-object: fetch one promisor object",
2017-12-05) plumbed through the from_promisor parameter but did
not document it everywhere it appeared. Add the documentation.
(It also plumbed through the no_dependents parameter, but I have left
that alone because it is being removed in a commit under review [1].)
[1] https://lore.kernel.org/git/e8f16d69089a5011c355d5939c56fa53b7a1eb2d.1597184949.git.jonathantanmy@google.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that Git has switched to using a subprocess to lazy-fetch missing
objects, remove the no_dependents code as it is no longer used.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The argv_array API is useful for not just managing argv but any
"vector" (NULL-terminated array) of strings, and has seen adoption
to a certain degree. It has been renamed to "strvec" to reduce the
barrier to adoption.
* jk/strvec:
strvec: rename struct fields
strvec: drop argv_array compatibility layer
strvec: update documention to avoid argv_array
strvec: fix indentation in renamed calls
strvec: convert remaining callers away from argv_array name
strvec: convert more callers away from argv_array name
strvec: convert builtin/ callers away from argv_array name
quote: rename sq_dequote_to_argv_array to mention strvec
strvec: rename files from argv-array to strvec
argv-array: rename to strvec
argv-array: use size_t for count and alloc
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pushing a ref whose name contains non-ASCII character with the
"--force-with-lease" option did not work over smart HTTP protocol,
which has been corrected.
* bc/push-cas-cquoted-refname:
remote-curl: make --force-with-lease work with non-ASCII ref names
Code which split an argv_array call across multiple lines, like:
argv_array_pushl(&args, "one argument",
"another argument", "and more",
NULL);
was recently mechanically renamed to use strvec, which results in
mis-matched indentation like:
strvec_pushl(&args, "one argument",
"another argument", "and more",
NULL);
Let's fix these up to align the arguments with the opening paren. I did
this manually by sifting through the results of:
git jump grep 'strvec_.*,$'
and liberally applying my editor's auto-format. Most of the changes are
of the form shown above, though I also normalized a few that had
originally used a single-tab indentation (rather than our usual style of
aligning with the open paren). I also rewrapped a couple of obvious
cases (e.g., where previously too-long lines became short enough to fit
on one), but I wasn't aggressive about it. In cases broken to three or
more lines, the grouping of arguments is sometimes meaningful, and it
wasn't worth my time or reviewer time to ponder each case individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the remaining files, as the resulting diff is
reasonably sized.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we invoke a remote transport helper and pass an option with an
argument, we quote the argument as a C-style string if necessary. This
is the case for the cas option, which implements the --force-with-lease
command-line flag, when we're passing a non-ASCII refname.
However, the remote curl helper isn't designed to parse such an
argument, meaning that if we try to use --force-with-lease with an HTTP
push and a non-ASCII refname, we get an error like this:
error: cannot parse expected object name '0000000000000000000000000000000000000000"'
Note the double quote, which get_oid has reminded us is not valid in an
hex object ID.
Even if we had been able to parse it, we would send the wrong data to
the server: we'd send an escaped ref, which would not behave as the user
wanted and might accidentally result in updating or deleting a ref we
hadn't intended.
Since we need to expect a quoted C-style string here, just check if the
first argument is a double quote, and if so, unquote it. Note that if
the refname contains a double quote, then we will have double-quoted it
already, so there is no ambiguity.
We test for this case only in the smart protocol, since the DAV-based
protocol is not capable of handling this capability. We use UTF-8
because this is nicer in our tests and friendlier to Windows, but the
code should work for all non-ASCII refs.
While we're at it, since the name of the option is now well established
and isn't going to change, let's inline it instead of using the #define
constant.
Reported-by: Frej Bjon <frej.bjon@nemit.fi>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SHA-256 migration work continues.
* bc/sha-256-part-2: (44 commits)
remote-testgit: adapt for object-format
bundle: detect hash algorithm when reading refs
t5300: pass --object-format to git index-pack
t5704: send object-format capability with SHA-256
t5703: use object-format serve option
t5702: offer an object-format capability in the test
t/helper: initialize the repository for test-sha1-array
remote-curl: avoid truncating refs with ls-remote
t1050: pass algorithm to index-pack when outside repo
builtin/index-pack: add option to specify hash algorithm
remote-curl: detect algorithm for dumb HTTP by size
builtin/ls-remote: initialize repository based on fetch
t5500: make hash independent
serve: advertise object-format capability for protocol v2
connect: parse v2 refs with correct hash algorithm
connect: pass full packet reader when parsing v2 refs
Documentation/technical: document object-format for protocol v2
t1302: expect repo format version 1 for SHA-256
builtin/show-index: provide options to determine hash algo
t5302: modernize test formatting
...
Normally, the remote-curl transport helper is aware of the hash
algorithm we're using because we're in a repo with the appropriate hash
algorithm set. However, when using git ls-remote outside of a
repository, we won't have initialized the hash algorithm properly, so
use hash_to_hex_algop to print the ref corresponding to the algorithm
we've detected.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reading the info/refs file for a repository, we have no explicit
way to detect which hash algorithm is in use because the file doesn't
provide one. Detect the hash algorithm in use by the size of the first
object ID.
If we have an empty repository, we don't know what the hash algorithm is
on the remote side, so default to whatever the local side has
configured. Without doing this, we cannot clone an empty repository
since we don't know its hash algorithm. Test this case appropriately,
since we currently have no tests for cloning an empty repository with
the dumb HTTP protocol.
We anonymize the URL like elsewhere in the function in case the user has
decided to include a secret in the URL.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement the object-format extensions that let us determine the hash
algorithm in use when pushing, pulling, and fetching.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, remote-curl acts as a proxy and blindly forwards packets
between an HTTP server and fetch-pack. In the case of a stateless RPC
connection where the connection is terminated before the transaction is
complete, remote-curl will blindly forward the packets before waiting on
more input from fetch-pack. Meanwhile, fetch-pack will read the
transaction and continue reading, expecting more input to continue the
transaction. This results in a deadlock between the two processes.
This can be seen in the following command which does not terminate:
$ git -c protocol.version=2 clone https://github.com/git/git.git --shallow-since=20151012
Cloning into 'git'...
whereas the v1 version does terminate as expected:
$ git -c protocol.version=1 clone https://github.com/git/git.git --shallow-since=20151012
Cloning into 'git'...
fatal: the remote end hung up unexpectedly
Instead of blindly forwarding packets, make remote-curl insert a
response end packet after proxying the responses from the remote server
when using stateless_connect(). On the RPC client side, ensure that each
response ends as described.
A separate control packet is chosen because we need to be able to
differentiate between what the remote server sends and remote-curl's
control packets. By ensuring in the remote-curl code that a server
cannot send response end packets, we prevent a malicious server from
being able to perform a denial of service attack in which they spoof a
response end packet and cause the described deadlock to happen.
Reported-by: Force Charlie <charlieio@outlook.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a future commit, we will use PACKET_READ_RESPONSE_END to separate
messages proxied by remote-curl. To prepare for this, add the
PACKET_READ_RESPONSE_END enum value.
In switch statements that need a case added, die() or BUG() when a
PACKET_READ_RESPONSE_END is unexpected. Otherwise, mirror how
PACKET_READ_DELIM is implemented (especially in cases where packets are
being forwarded).
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, remote-curl acts as a proxy and blindly forwards packets
between an HTTP server and fetch-pack. In the case of a stateless RPC
connection where the connection is terminated with a partially written
packet, remote-curl will blindly send the partially written packet
before waiting on more input from fetch-pack. Meanwhile, fetch-pack will
read the partial packet and continue reading, expecting more input. This
results in a deadlock between the two processes.
For a stateless connection, inspect packets before sending them and
error out if a packet line packet is incomplete.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the codebase, labels are aligned to the leftmost column. Remove the
space-indentation from `free_specs:` to conform to this.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We renamed the actual data structure in 910650d2f8 (Rename sha1_array to
oid_array, 2017-03-31), but the file is still called sha1-array. Besides
being slightly confusing, it makes it more annoying to grep for leftover
occurrences of "sha1" in various files, because the header is included
in so many places.
Let's complete the transition by renaming the source and header files
(and fixing up a few comment references).
I kept the "-" in the name, as that seems to be our style; cf.
fc1395f4a4 (sha1_file.c: rename to use dash in file name, 2018-04-10).
We also have oidmap.h and oidset.h without any punctuation, but those
are "struct oidmap" and "struct oidset" in the code. We _could_ make
this "oidarray" to match, but somehow it looks uglier to me because of
the length of "array" (plus it would be a very invasive patch for little
gain).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" over HTTP walker protocol did not show any progress
output. We inherently do not know how much work remains, but still
we can show something not to bore users.
* rs/show-progress-in-dumb-http-fetch:
remote-curl: show progress for fetches over dumb HTTP
Fetching over dumb HTTP transport doesn't show any progress, even with
the option --progress. If the connection is slow or there is a lot of
data to get then this can take a long time while the user is left to
wonder if git got stuck.
We don't know the number of objects to fetch at the outset, but we can
count the ones we got. Show an open-ended progress indicator based on
that number if the user asked for it.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
