"git remote rename X Y" needs to adjust configuration variables
(e.g. branch.<name>.remote) whose value used to be X to Y.
branch.<name>.pushRemote is now also updated.
* bw/remote-rename-update-config:
remote rename/remove: gently handle remote.pushDefault config
config: provide access to the current line number
remote rename/remove: handle branch.<name>.pushRemote config values
remote: clean-up config callback
remote: clean-up by returning early to avoid one indentation
pull --rebase/remote rename: document and honor single-letter abbreviations rebase types
When 46af44b07d (pull --rebase=<type>: allow single-letter abbreviations
for the type, 2018-08-04) landed in Git, it had the side effect that
not only 'pull --rebase=<type>' accepted the single-letter abbreviations
but also the 'pull.rebase' and 'branch.<name>.rebase' configurations.
However, 'git remote rename' did not honor these single-letter
abbreviations when reading the 'branch.*.rebase' configurations.
We now document the single-letter abbreviations and both code places
share a common function to parse the values of 'git pull --rebase=*',
'pull.rebase', and 'branches.*.rebase'.
The only functional change is the handling of the `branch_info::rebase`
value. Before it was an unsigned enum, thus the truth value could be
checked with `branch_info::rebase != 0`. But `enum rebase_type` is
signed, thus the truth value must now be checked with
`branch_info::rebase >= REBASE_TRUE`
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, signature verification for merge and pull operations checked
if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in
verify_merge_signature(). If that was the case, the process die()d.
The other code paths that did signature verification relied entirely on
the return code from check_commit_signature(). And signatures made with
a good key, irregardless of its trust level, was considered valid by
check_commit_signature().
This difference in behavior might induce users to erroneously assume
that the trust level of a key in their keyring is always considered by
Git, even for operations where it is not (e.g. during a verify-commit or
verify-tag).
The way it worked was by gpg-interface.c storing the result from the
key/signature status *and* the lowest-two trust levels in the `result`
member of the signature_check structure (the last of these status lines
that were encountered got written to `result`). These are documented in
GPG under the subsection `General status codes` and `Key related`,
respectively [1].
The GPG documentation says the following on the TRUST_ status codes [1]:
"""
These are several similar status codes:
- TRUST_UNDEFINED <error_token>
- TRUST_NEVER <error_token>
- TRUST_MARGINAL [0 [<validation_model>]]
- TRUST_FULLY [0 [<validation_model>]]
- TRUST_ULTIMATE [0 [<validation_model>]]
For good signatures one of these status lines are emitted to
indicate the validity of the key used to create the signature.
The error token values are currently only emitted by gpgsm.
"""
My interpretation is that the trust level is conceptionally different
from the validity of the key and/or signature. That seems to also have
been the assumption of the old code in check_signature() where a result
of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED)
were both considered a success.
The two cases where a result of 'U' had special meaning were in
verify_merge_signature() (where this caused git to die()) and in
format_commit_one() (where it affected the output of the %G? format
specifier).
I think it makes sense to refactor the processing of TRUST_ status lines
such that users can configure a minimum trust level that is enforced
globally, rather than have individual parts of git (e.g. merge) do it
themselves (except for a grace period with backward compatibility).
I also think it makes sense to not store the trust level in the same
struct member as the key/signature status. While the presence of a
TRUST_ status code does imply that the signature is good (see the first
paragraph in the included snippet above), as far as I can tell, the
order of the status lines from GPG isn't well-defined; thus it would
seem plausible that the trust level could be overwritten with the
key/signature status if they were stored in the same member of the
signature_check structure.
This patch introduces a new configuration option: gpg.minTrustLevel. It
consolidates trust-level verification to gpg-interface.c and adds a new
`trust_level` member to the signature_check structure.
Backward-compatibility is maintained by introducing a special case in
verify_merge_signature() such that if no user-configurable
gpg.minTrustLevel is set, then the old behavior of rejecting
TRUST_UNDEFINED and TRUST_NEVER is enforced. If, on the other hand,
gpg.minTrustLevel is set, then that value overrides the old behavior.
Similarly, the %G? format specifier will continue show 'U' for
signatures made with a key that has a trust level of TRUST_UNDEFINED or
TRUST_NEVER, even though the 'U' character no longer exist in the
`result` member of the signature_check structure. A new format
specifier, %GT, is also introduced for users that want to show all
possible trust levels for a signature.
Another approach would have been to simply drop the trust-level
requirement in verify_merge_signature(). This would also have made the
behavior consistent with other parts of git that perform signature
verification. However, requiring a minimum trust level for signing keys
does seem to have a real-world use-case. For example, the build system
used by the Qubes OS project currently parses the raw output from
verify-tag in order to assert a minimum trust level for keys used to
sign git tags [2].
[1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master
[2] 9674c1991d/scripts/verify-git-tag (L43)
Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the --set-upstream option to git pull/fetch
which lets the user set the upstream configuration
(branch.<current-branch-name>.merge and
branch.<current-branch-name>.remote) for the current branch.
A typical use-case is:
git clone http://example.com/my-public-fork
git remote add main http://example.com/project-main-repo
git pull --set-upstream main master
or, instead of the last line:
git fetch --set-upstream main master
git merge # or git rebase
This is mostly equivalent to cloning project-main-repo (which sets
upsteam) and then "git remote add" my-public-fork, but may feel more
natural for people using a hosting system which allows forking from
the web UI.
This functionality is analog to "git push --set-upstream".
Signed-off-by: Corentin BOMPARD <corentin.bompard@etu.univ-lyon1.fr>
Signed-off-by: Nathan BERBEZIER <nathan.berbezier@etu.univ-lyon1.fr>
Signed-off-by: Pablo CHABANNE <pablo.chabanne@etu.univ-lyon1.fr>
Signed-off-by: Matthieu Moy <git@matthieu-moy.fr>
Patch-edited-by: Matthieu Moy <git@matthieu-moy.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git fetch' command can avoid calculating forced updates, so
allow users of 'git pull' to provide that option. This is particularly
necessary when the advice to use '--no-show-forced-updates' is given
at the end of the command.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list of conflicted paths shown in the editor while concluding a
conflicted merge was shown above the scissors line when the
clean-up mode is set to "scissors", even though it was commented
out just like the list of updated paths and other information to
help the user explain the merge better.
* dl/merge-cleanup-scissors-fix:
cherry-pick/revert: add scissors line on merge conflict
sequencer.c: save and restore cleanup mode
merge: add scissors line on merge conflict
merge: cleanup messages like commit
parse-options.h: extract common --cleanup option
commit: extract cleanup_mode functions to sequencer
t7502: clean up style
t7604: clean up style
t3507: clean up style
t7600: clean up style
This change allows git-merge messages to be cleaned up with the
commit.cleanup configuration or --cleanup option, just like how
git-commit does it.
We also give git-pull the option of --cleanup so that it can also take
advantage of this change.
Finally, add testing to ensure that messages are properly cleaned up.
Note that some newlines that were added to the commit message were
removed so that if a file were read via -F, it would be copied
faithfully.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using get_oid_hex and GIT_SHA1_HEXSZ, use parse_oid_hex to
avoid the need for a constant and simplify the code.
Additionally, fix some comments to refer to object IDs instead of SHA-1
and update a constant used to provide an allocation hint.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds value completion for a couple more paramters. To make it
easier to maintain these hard coded lists, add a comment at the original
list/code to remind people to update git-completion.bash too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge" and "git pull" that merges into an unborn branch used
to completely ignore "--verify-signatures", which has been
corrected.
* jk/verify-sig-merge-into-void:
pull: handle --verify-signatures for unborn branch
merge: handle --verify-signatures for unborn branch
merge: extract verify_merge_signature() helper
We usually just forward the --verify-signatures option along to
git-merge, and trust it to do the right thing. However, when we are on
an unborn branch (i.e., there is no HEAD yet), we handle this case
ourselves without even calling git-merge. And in this code path, we do
not respect the verification option at all.
It may be more maintainable in the long run to call git-merge for the
unborn case. That would fix this bug, as well as prevent similar ones in
the future. But unfortunately it's not easy to do. As t5520.3
demonstrates, there are some special cases that git-merge does not
handle, like "git pull .. master:master" (by the time git-merge is
invoked, we've overwritten the unborn HEAD).
So for now let's just teach git-pull to handle this feature.
Reported-by: Felix Eckhofer <felix@eckhofer.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 174d131fc9 (submodule.c: remove implicit dependency on
the_index - 2018-09-21) makes collect_changed_submodules() take a
"struct index_state *" as argument even if it's not really used. My
bad.
Instead of deleting this argument and fixing up all call sites. Let's
take this opportunity to remove some the_repository instead because
there's one or two in this function (and two more in its callback).
The callers can also get rid of some the_repository.
Noticed-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
spatch transformation to replace boolean uses of !hashcmp() to
newly introduced oideq() is added, and applied, to regain
performance lost due to support of multiple hash algorithms.
* jk/cocci:
show_dirstat: simplify same-content check
read-cache: use oideq() in ce_compare functions
convert hashmap comparison functions to oideq()
convert "hashcmp() != 0" to "!hasheq()"
convert "oidcmp() != 0" to "!oideq()"
convert "hashcmp() == 0" to hasheq()
convert "oidcmp() == 0" to oideq()
introduce hasheq() and oideq()
coccinelle: use <...> for function exclusion
The code for computing history reachability has been shuffled,
obtained a bunch of new tests to cover them, and then being
improved.
* ds/reachable:
commit-reach: correct accidental #include of C file
commit-reach: use can_all_from_reach
commit-reach: make can_all_from_reach... linear
commit-reach: replace ref_newer logic
test-reach: test commit_contains
test-reach: test can_all_from_reach_with_flags
test-reach: test reduce_heads
test-reach: test get_merge_bases_many
test-reach: test is_descendant_of
test-reach: test in_merge_bases
test-reach: create new test tool for ref_newer
commit-reach: move can_all_from_reach_with_flags
upload-pack: generalize commit date cutoff
upload-pack: refactor ok_to_give_up()
upload-pack: make reachable() more generic
commit-reach: move commit_contains from ref-filter
commit-reach: move ref_newer from remote.c
commit.h: remove method declarations
commit-reach: move walk methods from commit.c
This is the flip side of the previous two patches: checking
for a non-zero oidcmp() can be more strictly expressed as
inequality. Like those patches, we write "!= 0" in the
coccinelle transformation, which covers by isomorphism the
more common:
if (oidcmp(E1, E2))
As with the previous two patches, this patch can be achieved
almost entirely by running "make coccicheck"; the only
differences are manual line-wrap fixes to match the original
code.
There is one thing to note for anybody replicating this,
though: coccinelle 1.0.4 seems to miss the case in
builtin/tag.c, even though it's basically the same as all
the others. Running with 1.0.7 does catch this, so
presumably it's just a coccinelle bug that was fixed in the
interim.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cmd -h" updates.
* rs/opt-updates:
parseopt: group literal string alternatives in argument help
remote: improve argument help for add --mirror
checkout-index: improve argument help for --stage
This formally clarifies that the "--option=" part is the same for all
alternatives.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull --rebase=interactive" learned "i" as a short-hand for
"interactive".
* js/pull-rebase-type-shorthand:
pull --rebase=<type>: allow single-letter abbreviations for the type
Git for Windows' original 4aa8b8c828 (Teach 'git pull' to handle
--rebase=interactive, 2011-10-21) had support for the very convenient
abbreviation
git pull --rebase=i
which was later lost when it was ported to the builtin `git pull`, and
it was not introduced before the patch eventually made it into Git as
f5eb87b98d (pull: allow interactive rebase with --rebase=interactive,
2016-01-13).
However, it is *really* a useful short hand for the occasional rebasing
pull on branches that do not usually want to be rebased.
So let's reintroduce this convenience, at long last.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These methods are now declared in commit-reach.h. Remove them from
commit.h and add new include statements in all files that require these
declarations.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_commit_reference
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make refspec parsing codepath more robust.
* ab/refspec-init-fix:
refspec: initalize `refspec_item` in `valid_fetch_refspec()`
refspec: add back a refspec_item_init() function
refspec: s/refspec_item_init/&_or_die/g
Use the obvious consensus of hyphenated "remote-tracking branch", and
fix an obvious typo, all in documentation and comments.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the refspec_item_init() function introduced in
6d4c057859 ("refspec: introduce struct refspec", 2018-05-16) to
refspec_item_init_or_die().
This follows the convention of other *_or_die() functions, and is done
in preparation for making it a wrapper for a non-fatal variant.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch $there $refspec" that talks over protocol v2 can take
advantage of server-side ref filtering; the code has been extended
so that this mechanism triggers also when fetching with configured
refspec.
* bw/ref-prefix-for-configured-refspec: (38 commits)
fetch: generate ref-prefixes when using a configured refspec
refspec: consolidate ref-prefix generation logic
submodule: convert push_unpushed_submodules to take a struct refspec
remote: convert check_push_refs to take a struct refspec
remote: convert match_push_refs to take a struct refspec
http-push: store refspecs in a struct refspec
transport: remove transport_verify_remote_names
send-pack: store refspecs in a struct refspec
transport: convert transport_push to take a struct refspec
push: convert to use struct refspec
push: check for errors earlier
remote: convert match_explicit_refs to take a struct refspec
remote: convert get_ref_match to take a struct refspec
remote: convert query_refspecs to take a struct refspec
remote: convert apply_refspecs to take a struct refspec
remote: convert get_stale_heads to take a struct refspec
fetch: convert prune_refs to take a struct refspec
fetch: convert get_ref_map to take a struct refspec
fetch: convert do_fetch to take a struct refspec
refspec: remove the deprecated functions
...
Developer support update, by using BUG() macro instead of die() to
mark codepaths that should not happen more clearly.
* js/use-bug-macro:
BUG_exit_code: fix sparse "symbol not declared" warning
Convert remaining die*(BUG) messages
Replace all die("BUG: ...") calls by BUG() ones
run-command: use BUG() to report bugs, not die()
test-tool: help verifying BUG() code paths
Migrate all git_path_* functions that are defined in path.c to take a
repository argument. Unlike other patches in this series, do not use the
#define trick, as we rewrite the whole function, which is rather small.
This doesn't migrate all the functions, as other builtins have their own
local path functions defined using GIT_PATH_FUNC. So keep that macro
around to serve the other locations.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert 'get_tracking_branch()' to use 'refspec_item_init()' instead of
the old 'parse_fetch_refspec()' function.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for introducing an abstraction around a collection of
refspecs (much like how a 'struct pathspec' is a collection of 'struct
pathspec_item's) rename the existing 'struct refspec' to 'struct
refspec_item'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for performing a refactor on refspec related code, move
the refspec parsing logic into its own file.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In d8193743e0 (usage.c: add BUG() function, 2017-05-12), a new macro
was introduced to use for reporting bugs instead of die(). It was then
subsequently used to convert one single caller in 588a538ae5
(setup_git_env: convert die("BUG") to BUG(), 2017-05-12).
The cover letter of the patch series containing this patch
(cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not
terribly clear why only one call site was converted, or what the plan
is for other, similar calls to die() to report bugs.
Let's just convert all remaining ones in one fell swoop.
This trick was performed by this invocation:
sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the `preserve` mode simply passing the `--preserve-merges`
option to the `rebase` command, the `merges` mode simply passes the
`--rebase-merges` option.
This will allow users to conveniently rebase non-trivial commit
topologies when pulling new commits, without flattening them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is more consistent with the project style. The majority of Git's
source files use dashes in preference to underscores in their file names.
Signed-off-by: Stefan Beller <sbeller@google.com>
Teach parse-options API an option to help the completion script,
and make use of the mechanism in command line completion.
* nd/parseopt-completion: (45 commits)
completion: more subcommands in _git_notes()
completion: complete --{reuse,reedit}-message= for all notes subcmds
completion: simplify _git_notes
completion: don't set PARSE_OPT_NOCOMPLETE on --rerere-autoupdate
completion: use __gitcomp_builtin in _git_worktree
completion: use __gitcomp_builtin in _git_tag
completion: use __gitcomp_builtin in _git_status
completion: use __gitcomp_builtin in _git_show_branch
completion: use __gitcomp_builtin in _git_rm
completion: use __gitcomp_builtin in _git_revert
completion: use __gitcomp_builtin in _git_reset
completion: use __gitcomp_builtin in _git_replace
remote: force completing --mirror= instead of --mirror
completion: use __gitcomp_builtin in _git_remote
completion: use __gitcomp_builtin in _git_push
completion: use __gitcomp_builtin in _git_pull
completion: use __gitcomp_builtin in _git_notes
completion: use __gitcomp_builtin in _git_name_rev
completion: use __gitcomp_builtin in _git_mv
completion: use __gitcomp_builtin in _git_merge_base
...
"git pull --rebase" did not pass verbosity setting down when
recursing into a submodule.
* sb/pull-rebase-submodule:
builtin/pull: respect verbosity settings in submodules
--force option is most likely hidden from command line completion for
safety reasons. This is done by adding an extra flag
PARSE_OPT_NOCOMPLETE. Update OPT__FORCE() to accept additional
flags. Actual flag change comes later depending on individual
commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a6d7eb2c7a (pull: optionally rebase submodules (remote submodule
changes only), 2017-06-23), we taught Git how to rebase submodules in
a pull. However we missed to pass on the verbosity settings.
Reported-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An infrastructure to define what hash function is used in Git is
introduced, and an effort to plumb that throughout various
codepaths has been started.
* bc/hash-algo:
repository: fix a sparse 'using integer as NULL pointer' warning
Switch empty tree and blob lookups to use hash abstraction
Integrate hash algorithm support with repo setup
Add structure representing hash algorithm
setup: expose enumerated repo info
Contrary to the documentation, "git pull -4/-6 other-args" did not
ask the underlying "git fetch" to go over IPv4/IPv6, which has been
corrected.
* sw/pull-ipv46-passthru:
pull: pass -4/-6 option to 'git fetch'
The -4/-6 option should be passed through to 'git fetch' to be
consistent with the man page.
Signed-off-by: Wei Shuyu <wsy@dogben.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
