Bundle providers may organize their bundle lists in a way that is
intended to improve incremental fetches, not just initial clones.
However, they do need to state that they have organized with that in
mind, or else the client will not expect to save time by downloading
bundles after the initial clone. This is done by specifying a
bundle.heuristic value.
There are two types of bundle lists: those at a static URI and those
that are advertised from a Git remote over protocol v2.
The new fetch.bundleURI config value applies for static bundle URIs that
are not advertised over protocol v2. If the user specifies a static URI
via 'git clone --bundle-uri', then Git can set this config as a reminder
for future 'git fetch' operations to check the bundle list before
connecting to the remote(s).
For lists provided over protocol v2, we will want to take a different
approach and create a property of the remote itself by creating a
remote.<id>.* type config key. That is not implemented in this change.
Later changes will update 'git fetch' to consume this option.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change taught Git to parse the bundle.heuristic value,
especially when its value is "creationToken". Now, teach Git to parse
the bundle.<id>.creationToken values on each bundle in a bundle list.
Before implementing any logic based on creationToken values for the
creationToken heuristic, parse and print these values for testing
purposes.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bundle.heuristic value communicates that the bundle list is
organized to make use of the bundle.<id>.creationToken values that may
be provided in the bundle list. Those values will create a total order
on the bundles, allowing the Git client to download them in a specific
order and even remember previously-downloaded bundles by storing the
maximum creation token value.
Before implementing any logic that parses or uses the
bundle.<id>.creationToken values, teach Git to parse the
bundle.heuristic value from a bundle list. We can use 'test-tool
bundle-uri' to print the heuristic value and verify that the parsing
works correctly.
As an extra precaution, create the internal 'heuristics' array to be a
list of (enum, string) pairs so we can iterate through the array entries
carefully, regardless of the enum values.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic in fetch_bundle_uri() is useful for the --bundle-uri option of
'git clone', but is not helpful when the clone operation discovers a
list of URIs from the bundle-uri protocol v2 command. To actually
download and unbundle the advertised bundles, we need a different
mechanism.
Create the new fetch_bundle_list() method which is very similar to
fetch_bundle_uri() except that it relies on download_bundle_list()
instead of fetch_bundle_uri_internal(). The download_bundle_list()
method will recursively call fetch_bundle_uri_internal() if any of the
advertised URIs serve a bundle list instead of a bundle. This will also
follow the bundle.list.mode setting from the input list: "any" will
download only one such URI while "all" will download data from all of
the URIs.
In an identical way to fetch_bundle_uri(), the bundles are unbundled
after all of the bundle lists have been expanded and all necessary URIs.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bundle providers may want to distribute that data across multiple CDNs.
This might require a change in the base URI, all the way to the domain
name. If all bundles require an absolute URI in their 'uri' value, then
every push to a CDN would require altering the table of contents to
match the expected domain and exact location within it.
Allow a bundle list to specify a relative URI for the bundles. This URI
is based on where the client received the bundle list. For a list
provided in the 'bundle-uri' protocol v2 command, the Git remote URI is
the base URI. Otherwise, the bundle list was provided from an HTTP URI
not using the Git protocol, and that URI is the base URI. This allows
easier distribution of bundle data.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a skeleton server-side implementation of a new "bundle-uri" command
to protocol v2. This will allow conforming clients to optionally seed
their initial clones or incremental fetches from URLs containing
"*.bundle" files created with "git bundle create".
This change only performs the basic boilerplate of advertising a new
protocol v2 capability. The new 'bundle-uri' capability allows a client
to request a list of bundles. Right now, the server only returns a flush
packet, which corresponds to an empty advertisement. The bundle.* config
namespace describes which key-value pairs will be communicated across
this interface in future updates.
The critical bit right now is that the new boolean
uploadPack.adverstiseBundleURIs config value signals whether or not this
capability should be advertised at all.
An earlier version of this patch [1] used a different transfer format
than the "key=value" pairs in the current implementation. The change was
made to unify the protocol v2 command with the bundle lists provided by
independent bundle servers. Further, the standard allows for the server
to advertise a URI that contains a bundle list. This allows users
automatically discovering bundle providers that are loosely associated
with the origin server, but without the origin server knowing exactly
which bundles are currently available.
[1] https://lore.kernel.org/git/RFC-patch-v2-01.13-2fc87ce092b-20220311T155841Z-avarab@gmail.com/
The very-deep headings needed to be modified to stop at level 4 due to
documentation build issues. These were not recognized in earlier builds
since the file was previously in the Documentation/technical/ directory
and was built in a different way. With its current location, the
heavily-nested details were causing build issues and they are now
replaced with a bulletted list of details.
Co-authored-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the content at a given bundle URI is not understood as a bundle
(based on inspecting the initial content), then Git currently gives up
and ignores that content. Independent bundle providers may want to split
up the bundle content into multiple bundles, but still make them
available from a single URI.
Teach Git to attempt parsing the bundle URI content as a Git config file
providing the key=value pairs for a bundle list. Git then looks at the
mode of the list to see if ANY single bundle is sufficient or if ALL
bundles are required. The content at the selected URIs are downloaded
and the content is inspected again, creating a recursive process.
To guard the recursion against malformed or malicious content, limit the
recursion depth to a reasonable four for now. This can be converted to a
configured value in the future if necessary. The value of four is twice
as high as expected to be useful (a bundle list is unlikely to point to
more bundle lists).
To test this scenario, create an interesting bundle topology where three
incremental bundles are built on top of a single full bundle. By using a
merge commit, the two middle bundles are "independent" in that they do
not require each other in order to unbundle themselves. They each only
need the base bundle. The bundle containing the merge commit requires
both of the middle bundles, though. This leads to some interesting
decisions when unbundling, especially when we later implement heuristics
that promote downloading bundles until the prerequisite commits are
satisfied.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a bundle provider wants to operate independently from a Git remote,
they want to provide a single, consistent URI that users can use in
their 'git clone --bundle-uri' commands. At this point, the Git client
expects that URI to be a single bundle that can be unbundled and used to
bootstrap the rest of the clone from the Git server. This single bundle
cannot be re-used to assist with future incremental fetches.
To allow for the incremental fetch case, teach Git to understand a
bundle list that could be advertised at an independent bundle URI. Such
a bundle list is likely to be inspected by human readers, even if only
by the bundle provider creating the list. For this reason, we can take
our expected "key=value" pairs and instead format them using Git config
format.
Create bundle_uri_parse_config_format() to parse a file in config format
and convert that into a 'struct bundle_list' filled with its
understanding of the contents.
Be careful to use error_action CONFIG_ERROR_ERROR when calling
git_config_from_file_with_options() because the default action for
git_config_from_file() is to die() on a parsing error. The current
warning isn't particularly helpful if it arises to a user, but it will
be made more verbose at a higher layer later.
Update 'test-tool bundle-uri' to take this config file format as input.
It uses a filename instead of stdin because there is no existing way to
parse a FILE pointer in the config machinery. Using
git_config_from_mem() is overly complicated and more likely to introduce
bugs than this simpler version.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new 'test-tool bundle-uri' test helper. This helper will assist
in testing logic deep in the bundle URI feature.
This change introduces the 'parse-key-values' subcommand, which parses
an input file as a list of lines. These are fed into
bundle_uri_parse_line() to test how we construct a 'struct bundle_list'
from that data. The list is then output to stdout as if the key-value
pairs were a Git config file.
We use an input file instead of stdin because of a future change to
parse in config-file format that works better as an input file.
Co-authored-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When advertising a bundle list over Git's protocol v2, we will use
packet lines. Each line will be of the form "key=value" representing a
bundle list. Connect the API necessary for Git's transport to the
key-value pair parsing created in the previous change.
We are not currently implementing this protocol v2 functionality, but
instead preparing to expose this parsing to be unit-testable.
Co-authored-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It will likely be rare where a user uses a single bundle URI and expects
that URI to point to a bundle. Instead, that URI will likely be a list
of bundles provided in some format. Alternatively, the Git server could
advertise a list of bundles.
In anticipation of these two ways of advertising multiple bundles,
create a data structure that represents such a list. This will be
populated using a common API, but for now focus on what data can be
represented.
Each list contains a number of remote_bundle_info structs. These contain
an 'id' that is used to uniquely identify them in the list, and also a
'uri' that contains the location of its data. Finally, there is a strbuf
containing the filename used when Git downloads the contents to disk.
The list itself stores these remote_bundle_info structs in a hashtable
using 'id' as the key. The order of the structs in the input is
considered unimportant, but future modifications to the format and these
data structures will place ordering possibilities on the set. The list
also has a few "global" properties, including the version (used when
parsing the list) and the mode. The mode is one of these two options:
1. BUNDLE_MODE_ALL: all listed URIs are intended to be combined
together. The client should download all of the advertised data to
have a complete copy of the data.
2. BUNDLE_MODE_ANY: any one listed item is sufficient to have a complete
copy of the data. The client can choose arbitrarily from these
options. In the future, the client may use pings to find the closest
URI among geodistributed replicas, or use some other heuristic
information added to the format.
This API is currently unused, but will soon be expanded with parsing
logic and then be consumed by the bundle URI download logic.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before implementing a way to fetch bundles into a repository, create the
basic logic. Assume that the URI is actually a file path. Future logic
will make this more careful to other protocols.
For now, we also only succeed if the content at the URI is a bundle
file, not a bundle list. Bundle lists will be implemented in a future
change.
Note that the discovery of a temporary filename is slightly racy because
the odb_mkstemp() relies on the temporary file not existing. With the
current implementation being limited to file copies, we could replace
the copy_file() with copy_fd(). The tricky part comes in future changes
that send the filename to 'git remote-https' and its 'get' capability.
At that point, we need the file descriptor closed _and_ the file
unlinked. If we were to keep the file descriptor open for the sake of
normal file copies, then we would pollute the rest of the code for
little benefit. This is especially the case because we expect that most
bundle URI use will be based on HTTPS instead of file copies.
Reviewed-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
