"git gc" and "git repack" did not close the open packfiles that
they found unneeded before removing them, which didn't work on a
platform incapable of removing an open file. This has been
corrected.
* js/gc-repack-close-before-remove:
gc/repack: release packs when needed
"git worktree remove" and "git worktree move" refused to work when
there is a submodule involved. This has been loosened to ignore
uninitialized submodules.
* nd/worktree-remove-with-uninitialized-submodules:
worktree: allow to (re)move worktrees with uninitialized submodules
The core.worktree setting in a submodule repository should not be
pointing at a directory when the submodule loses its working tree
(e.g. getting deinit'ed), but the code did not properly maintain
this invariant.
* sb/submodule-unset-core-worktree-when-worktree-is-lost:
submodule deinit: unset core.worktree
submodule--helper: fix BUG message in ensure_core_worktree
submodule: unset core.worktree if no working tree is present
submodule update: add regression test with old style setups
"git stripspace" should be usable outside a git repository, but
under the "-s" or "-c" mode, it didn't.
* jn/stripspace-wo-repository:
stripspace: allow -s/-c outside git repository
"git submodule update" ought to use a single job unless asked, but
by mistake used multiple jobs, which has been fixed.
* sb/submodule-fetchjobs-default-to-one:
submodule update: run at most one fetch job unless otherwise set
"git checkout [<tree-ish>] path..." learned to report the number of
paths that have been checked out of the index or the tree-ish,
which gives it the same degree of noisy-ness as the case in which
the command checks out a branch.
* nd/checkout-noisy:
t0027: squelch checkout path run outside test_expect_* block
checkout: print something when checking out paths
The traversal over tree objects has learned to honor
":(attr:label)" pathspec match, which has been implemented only for
enumerating paths on the filesystem.
* nd/attr-pathspec-in-tree-walk:
tree-walk: support :(attr) matching
dir.c: move, rename and export match_attrs()
pathspec.h: clean up "extern" in function declarations
tree-walk.c: make tree_entry_interesting() take an index
tree.c: make read_tree*() take 'struct repository *'
On Windows, files cannot be removed nor renamed if there are still
handles held by a process. To remedy that, we introduced the
close_all_packs() function.
Earlier, we made sure that the packs are released just before `git gc`
is spawned, in case that gc wants to remove no-longer needed packs.
But this developer forgot that gc itself also needs to let go of packs,
e.g. when consolidating all packs via the --aggressive option.
Likewise, `git repack -d` wants to delete obsolete packs and therefore
needs to close all pack handles, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Uninitialized submodules have nothing valueable for us to be worried
about. They are just SHA-1. Let "worktree remove" and "worktree move"
continue in this case so that people can still use multiple worktrees
on repos with optional submodules that are never populated, like
sha1collisiondetection in git.git when checked out by doc-diff script.
Note that for "worktree remove", it is possible that a user
initializes a submodule (*), makes some commits (but not push), then
deinitializes it. At that point, the submodule is unpopulated, but the
precious new commits are still in
$GIT_COMMON_DIR/worktrees/<worktree>/modules/<submodule>
directory and we should not allow removing the worktree or we lose
those commits forever. The new directory check is added to prevent
this.
(*) yes they are screwed anyway by doing this since "git submodule"
would add submodule.* in $GIT_COMMON_DIR/config, which is shared
across multiple worktrees. But it does not mean we let them be
screwed even more.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refspecs configured with "git -c var=val clone" did not propagate
to the resulting repository, which has been corrected.
* sg/clone-initial-fetch-configuration:
Documentation/clone: document ignored configuration variables
clone: respect additional configured fetch refspecs during initial fetch
clone: use a more appropriate variable name for the default refspec
"git checkout frotz" (without any double-dash) avoids ambiguity by
making sure 'frotz' cannot be interpreted as a revision and as a
path at the same time. This safety has been updated to check also
a unique remote-tracking branch 'frotz' in a remote, when dwimming
to create a local branch 'frotz' out of a remote-tracking branch
'frotz' from a remote.
* nd/checkout-dwim-fix:
checkout: disambiguate dwim tracking branches and local files
Small fixes and features for fast-export and fast-import, mostly on
the fast-export side.
* en/fast-export-import:
fast-export: add a --show-original-ids option to show original names
fast-import: remove unmaintained duplicate documentation
fast-export: add --reference-excluded-parents option
fast-export: ensure we export requested refs
fast-export: when using paths, avoid corrupt stream with non-existent mark
fast-export: move commit rewriting logic into a function for reuse
fast-export: avoid dying when filtering by paths and old tags exist
fast-export: use value from correct enum
git-fast-export.txt: clarify misleading documentation about rev-list args
git-fast-import.txt: fix documentation for --quiet option
fast-export: convert sha1 to oid
Code clean-up with optimization for the codepath that checks
(non-)existence of loose objects.
* jk/loose-object-cache:
odb_load_loose_cache: fix strbuf leak
fetch-pack: drop custom loose object cache
sha1-file: use loose object cache for quick existence check
object-store: provide helpers for loose_objects_cache
sha1-file: use an object_directory for the main object dir
handle alternates paths the same as the main object dir
sha1_file_name(): overwrite buffer instead of appending
rename "alternate_object_database" to "object_directory"
submodule--helper: prefer strip_suffix() to ends_with()
fsck: do not reuse child_process structs
More _("i18n") markings.
* nd/i18n:
fsck: mark strings for translation
fsck: reduce word legos to help i18n
parse-options.c: mark more strings for translation
parse-options.c: turn some die() to BUG()
parse-options: replace opterror() with optname()
repack: mark more strings for translation
remote.c: mark messages for translation
remote.c: turn some error() or die() to BUG()
reflog: mark strings for translation
read-cache.c: add missing colon separators
read-cache.c: mark more strings for translation
read-cache.c: turn die("internal error") to BUG()
attr.c: mark more string for translation
archive.c: mark more strings for translation
alias.c: mark split_cmdline_strerror() strings for translation
git.c: mark more strings for translation
v2.11.0-rc3~3^2~1 (stripspace: respect repository config, 2016-11-21)
improved stripspace --strip-comments / --comentlines by teaching them
to read repository config, but it went a little too far: when running
stripspace outside any repository, the result is
$ git stripspace --strip-comments <test-input
fatal: not a git repository (or any parent up to mount point /tmp)
That makes experimenting with the stripspace command unnecessarily
fussy. Fix it by discovering the git directory gently, as intended
all along.
Reported-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule is deinit'd, the working tree is gone, so the setting of
core.worktree is bogus. Unset it. As we covered the only other case in
which a submodule loses its working tree in the earlier step
(i.e. switching branches of top-level project to move to a commit that did
not have the submodule), this makes the code always maintain
core.worktree correctly unset when there is no working tree
for a submodule.
This re-introduces 984cd77ddb (submodule deinit: unset core.worktree,
2018-06-18), which was reverted as part of f178c13fda (Revert "Merge
branch 'sb/submodule-core-worktree'", 2018-09-07)
The whole series was reverted as the offending commit e98317508c
(submodule: ensure core.worktree is set after update, 2018-06-18)
was relied on by other commits such as 984cd77ddb.
Keep the offending commit reverted, but its functionality came back via
4d6d6ef1fc (Merge branch 'sb/submodule-update-in-c', 2018-09-17), such
that we can reintroduce 984cd77ddb now.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
74d4731da1 (submodule--helper: replace connect-gitdir-workingtree by
ensure-core-worktree, 2018-08-13) missed to update the BUG message.
Fix it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a028a1930c (fetching submodules: respect `submodule.fetchJobs`
config option, 2016-02-29), we made sure to keep the default
behavior of fetching at most one submodule at once when not setting
the newly introduced `submodule.fetchJobs` config.
This regressed in 90efe595c5 (builtin/submodule--helper: factor
out submodule updating, 2018-08-03). Fix it.
Reported-by: Sjon Hortensius <sjon@parse.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The compiler reports this because show_gitcomp() never actually
returns a value:
"parse-options.c", line 520: warning: Function has no return
statement : show_gitcomp
We could shut the compiler up. But instead let's not bury exit() too
deep. Do the same as internal -h handling, return a special error code
and handle the exit() in parse_options() (and other
parse_options_step() callers) instead.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We indent with TABs and sometimes for fine alignment, TABs followed by
spaces, but never all spaces (unless the indentation is less than 8
columns). Indenting with spaces slips through in some places. Fix
them.
Imported code and compat/ are left alone on purpose. The former should
remain as close as upstream as possible. The latter pretty much has
separate maintainers, it's up to them to decide.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Put the allow_exclude_promisor_objects flag in setup_revision_opt. When
it was in rev_info, it was unclear when it was used, since rev_info is
passed to functions that don't use the flag. This resulted in
unnecessary setting of the flag in prune.c, so fix that as well.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d8981c3f88 ("format-patch: do not let its diff-options affect
--range-diff", 2018-11-30) taught `show_range_diff()` to accept a
NULL-pointer as an indication that it should use its own "reasonable
default". That fixed a regression from a5170794 ("Merge branch
'ab/range-diff-no-patch'", 2018-11-18), but unfortunately it introduced
a regression of its own.
In particular, it means we forget the `file` member of the diff options,
so rather than placing a range-diff in the cover-letter, we write it to
stdout. In order to fix this, rewrite the two callers adjusted by
d8981c3f88 to instead create a "dummy" set of diff options where they
only fill in the fields we absolutely require, such as output file and
color.
Modify and extend the existing tests to try and verify that the right
contents end up in the right place.
Don't revert `show_range_diff()`, i.e., let it keep accepting NULL.
Rather than removing what is dead code and figuring out it isn't
actually dead and we've broken 2.20, just leave it for now.
[es: retain diff coloring when going to stdout]
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An error message that sugggests how to give correct arguments to
"git push" has been updated.
* ab/push-example-in-doc:
push: change needlessly ambiguous example in error
The advice message to tell the user to migrate an existing graft
file to the replace system when a graft file was read was shown
even when "git replace --convert-graft-file" command, which is the
way the message suggests to use, was running, which made little
sense.
* ab/replace-graft-with-replace-advice:
advice: don't pointlessly suggest --convert-graft-file
"git rebase --stat" to transplant a piece of history onto a totally
unrelated history were not working before and silently showed wrong
result. With the recent reimplementation in C, it started to instead
die with an error message, as the original logic was not prepared
to cope with this case. This has now been fixed.
* js/rebase-stat-unrelated-fix:
rebase --stat: fix when rebasing to an unrelated history
"git rebase" reimplemented recently in C accidentally changed the
way reflog entries are recorded (earlier "rebase -i" identified the
entries it leaves with "rebase -i", but the new version always
marks them with "rebase"). This has been corrected.
* js/rebase-reflog-action-fix:
rebase: fix GIT_REFLOG_ACTION regression
The whitespace breakages in these messages were introduced while
reimplementing the subcommand in C. Match these messages to those
in the original scripted version.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebasing to a commit history that has no common commits with the
current branch, there is no merge base. In diffstat mode, this means
that we cannot compare to the merge base, but we have to compare to the
empty tree instead.
Also, if running in verbose diffstat mode, we should not output
Changes from <merge-base> to <onto>
as that does not make sense without any merge base.
Note: neither scripted nor built-in versoin of `git rebase` were
prepared for this situation well. We use this opportunity not only to
fix the bug(s), but also to make both versions' output consistent in
this instance. And add a regression test to keep this working in all
eternity.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The scripted version of "rebase" honored the `GIT_REFLOG_ACTION`,
and some automation scripts expected the reflog entries to be
prefixed with "rebase -i", not "rebase", after running "rebase -i".
This regressed in the reimplementation in C.
Fix that, and add a regression test, both with `GIT_REFLOG_ACTION`
set and unset.
Note: the reflog message for "rebase finished" did *not* honor
GIT_REFLOG_ACTION, and as we are very late in the v2.20.0-rcN phase,
we leave that bug for later (as it seems that that bug has been with
us from the very beginning).
Reported by Ian Jackson.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop leaking how the primary output of format-patch is customized to
the range-diff machinery and instead let the latter use its own
"reasonable default", in order to correct the breakage introduced by
a5170794 ("Merge branch 'ab/range-diff-no-patch'", 2018-11-18) on
the 'master' front. "git format-patch --range-diff..." without any
weird diff option started to include the "range-diff --stat" output,
which is rather useless right now, that made the whole thing
unusable and this is probably the least disruptive way to whip the
codebase into a shippable shape.
We may want to later make the range-diff driven by format-patch more
configurable, but that would have to wait until we have a good
design.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The advice to run 'git replace --convert-graft-file' added in
f9f99b3f7d ("Deprecate support for .git/info/grafts", 2018-04-29)
didn't add an exception for the 'git replace --convert-graft-file'
codepath itself.
As a result we'd suggest running --convert-graft-file while the user
was running --convert-graft-file, which makes no sense. Before:
$ git replace --convert-graft-file
hint: Support for <GIT_DIR>/info/grafts is deprecated
hint: and will be removed in a future Git version.
hint:
hint: Please use "git replace --convert-graft-file"
hint: to convert the grafts into replace refs.
hint:
hint: Turn this message off by running
hint: "git config advice.graftFileDeprecated false"
Add a check for that case and skip printing the advice while the user
is busy following our advice.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A regression in Git 2.12 era made "git fsck" fall into an infinite
loop while processing truncated loose objects.
* jk/detect-truncated-zlib-input:
cat-file: handle streaming failures consistently
check_stream_sha1(): handle input underflow
t1450: check large blob in trailing-garbage test
Operations on promisor objects make sense in the context of only a
small subset of the commands that internally use the revisions
machinery, but the "--exclude-promisor-objects" option were taken
and led to nonsense results by commands like "log", to which it
didn't make much sense. This has been corrected.
* md/exclude-promisor-objects-fix:
exclude-promisor-objects: declare when option is allowed
Documentation/git-log.txt: do not show --exclude-promisor-objects
"git repack" in a shallow clone did not correctly update the
shallow points in the repository, leading to a repository that
does not pass fsck.
* js/shallow-and-fetch-prune:
repack -ad: prune the list of shallow commits
shallow: offer to prune only non-existing entries
repack: point out a bug handling stale shallow info
The receive.denyCurrentBranch=updateInstead codepath kicked in even
when the push should have been rejected due to other reasons, such
as it does not fast-forward or the update-hook rejects it, which
has been corrected.
* jc/receive-deny-current-branch-fix:
receive: denyCurrentBranch=updateinstead should not blindly update
A mutex used in "git pack-objects" were not correctly initialized
and this caused "git repack" to dump core on Windows.
* js/pack-objects-mutex-init-fix:
pack-objects (mingw): initialize `packing_data` mutex in the correct spot
pack-objects (mingw): demonstrate a segmentation fault with large deltas
pack-objects: fix typo 'detla' -> 'delta'
The code in "git status" sometimes hit an assertion failure. This
was caused by a structure that was reused without cleaning the data
used for the first run, which has been corrected.
* en/status-multiple-renames-to-the-same-target-fix:
commit: fix erroneous BUG, 'multiple renames on the same target? how?'