Rather than have a variable with a short name that is fed to
git_path(), let's add a helper function that returns the
full path. This avoids the dangerous git_path() function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* jk/pack-name-cleanups:
index-pack: make pointer-alias fallbacks safer
replace snprintf with odb_pack_name()
odb_pack_keep(): stop generating keepfile name
sha1_file.c: make pack-name helper globally accessible
move odb_* declarations out of git-compat-util.h
"git fetch" that requests a commit by object name, when the other
side does not allow such an request, failed without much
explanation.
* mm/fetch-show-error-message-on-unadvertised-object:
fetch-pack: add specific error for fetching an unadvertised object
fetch_refs_via_pack: call report_unmatched_refs
fetch-pack: move code to report unmatched refs to a function
"git branch @" created refs/heads/@ as a branch, and in general the
code that handled @{-1} and @{upstream} was a bit too loose in
disambiguating.
* jk/interpret-branch-name:
checkout: restrict @-expansions when finding branch
strbuf_check_ref_format(): expand only local branches
branch: restrict @-expansions when deleting
t3204: test git-branch @-expansion corner cases
interpret_branch_name: allow callers to restrict expansions
strbuf_branchname: add docstring
strbuf_branchname: drop return value
interpret_branch_name: move docstring to header file
interpret_branch_name(): handle auto-namelen for @{-1}
"git repack --depth=<n>" for a long time busted the specified depth
when reusing delta from existing packs. This has been corrected.
* jk/delta-chain-limit:
pack-objects: convert recursion to iteration in break_delta_chain()
pack-objects: enforce --depth limit in reused deltas
The code to parse the command line "git grep <patterns>... <rev>
[[--] <pathspec>...]" has been cleaned up, and a handful of bugs
have been fixed (e.g. we used to check "--" if it is a rev).
* jk/grep-no-index-fix:
grep: treat revs the same for --untracked as for --no-index
grep: do not diagnose misspelt revs with --no-index
grep: avoid resolving revision names in --no-index case
grep: fix "--" rev/pathspec disambiguation
grep: re-order rev-parsing loop
grep: do not unnecessarily query repo for "--"
grep: move thread initialization a little lower
"git push" had a handful of codepaths that could lead to a deadlock
when unexpected error happened, which has been fixed.
* jk/push-deadlock-regression-fix:
send-pack: report signal death of pack-objects
send-pack: read "unpack" status even on pack-objects failure
send-pack: improve unpack-status error messages
send-pack: use skip_prefix for parsing unpack status
send-pack: extract parsing of "unpack" response
receive-pack: fix deadlock when we cannot create tmpdir
"git show-branch" expected there were only very short branch names
in the repository and used a fixed-length buffer to hold them
without checking for overflow.
* jk/show-branch-lift-name-len-limit:
show-branch: use skip_prefix to drop magic numbers
show-branch: store resolved head in heap buffer
show-branch: drop head_len variable
"git remote rm X", when a branch has remote X configured as the
value of its branch.*.remote, tried to remove branch.*.remote and
branch.*.merge and failed if either is unset.
* rl/remote-allow-missing-branch-name-merge:
remote: ignore failure to remove missing branch.<name>.merge
A "gc.log" file left by a backgrounded "gc --auto" disables further
automatic gc; it has been taught to run at least once a day (by
default) by ignoring a stale "gc.log" file that is too old.
* dt/gc-ignore-old-gc-logs:
gc: ignore old gc.log files
The string after_subject is added to a strbuf by pp_title_line() if
it's not NULL. Adding an empty string has the same effect as not
adding anything, but the latter is easier, so don't bother changing
the context member from NULL to "".
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of counting the arguments to see if there are any and then
building the full command use a single loop and add the hook command
just before the first argument. This reduces duplication and overall
code size.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final() function accepts a NULL value for certain
parameters, and falls back to writing into a reusable "name"
buffer, and then either:
1. For "keep_name", requiring all uses to do "keep_name ?
keep_name : name.buf". This is awkward, and it's easy
to accidentally look at the maybe-NULL keep_name.
2. For "final_index_name" and "final_pack_name", aliasing
those pointers to the "name" buffer. This is easier to
use, but the aliased pointers become invalid after the
buffer is reused (this isn't a bug now, but it's a
potential pitfall).
One way to make this safer would be to introduce an extra
pointer to do the aliasing, and have its lifetime match the
validity of the "name" buffer. But it's still easy to
accidentally use the wrong name (i.e., to use
"final_pack_name" instead of the aliased pointer).
Instead, let's use three separate buffers that will remain
valid through the function. That makes it safe to alias the
pointers and use them consistently. The extra allocations
shouldn't matter, as this function is not performance
sensitive.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In several places we write the name of the pack filename
into a fixed-size buffer using snprintf(), but do not check
the return value. As a result, a very long object directory
could cause us to quietly truncate the pack filename
(potentially leading to a corrupted repository, as a newly
written packfile could be missing its .pack extension).
We can use odb_pack_name() to do this with a strbuf (and
shorten the code, as well).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The odb_pack_keep() function generates the name of a .keep
file and opens it. This has two problems:
1. It requires a fixed-size buffer to create the filename
and doesn't notice when the result is truncated.
2. Of the two callers, one sometimes wants to open a
filename it already has, which makes things awkward (it
has to do so manually, and skips the leading-directory
creation).
Instead, let's have odb_pack_keep() just open the file.
Generating the name isn't hard, and a future patch will
switch callers over to odb_pack_name() anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of these options do the same thing "--foo" iterates over
the "foo" refs, and "--foo=<glob>" does the same with a
glob. We can factor this into its own function to avoid
repeating ourselves.
There are two subtleties to note:
- the original called for_each_branch_ref(), etc, in the
non-glob case. Now we will call for_each_ref_in("refs/heads/")
which is exactly what for_each_branch_ref() did under
the hood.
- for --glob, we'll call for_each_glob_ref_in() with a
NULL "prefix" argument. Which is exactly what
for_each_glob_ref() was doing already.
So both cases should behave identically, and it seems
reasonable to assume that this will remain the same. The
functions we are calling now are the more-generic ones, and
the ones we are dropping are just convenience wrappers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can't just use a bare skip_prefix() for these cases,
because we need to match both the "--foo" form and the
"--foo=<value>" form (and tell the difference between the
two in the caller).
We can wrap this in a simple helper which has two obvious
callsites, and will gain some more in the next patch.
Note that the error output for abbrev-ref changes slightly,
as we don't keep our original "arg" pointer. However, the
new output should hopefully be more clear:
[before]
fatal: unknown mode for --abbrev-ref=foo
[after]
fatal: unknown mode for --abbrev-ref: foo
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using skip_prefix lets us avoid manually-counted offsets
into the argument string. This patch converts the simple and
obvious cases.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All callers of add_blame_entry() allocate and copy the second argument.
Let the function do it for them, reducing code duplication.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 4ac9006f83 (real_path: have callers use real_pathdup and
strbuf_realpath, 2016-12-12), we changed the xstrdup(real_path())
pattern to use real_pathdup() directly.
The problem with this change is that real_path() calls
strbuf_realpath() with die_on_error = 1 while real_pathdup() calls
it with die_on_error = 0. Meaning that in cases where real_path()
causes Git to die() with an error message, real_pathdup() is silent
and returns NULL instead.
The callers, however, are ill-prepared for that change, as they expect
the return value to be non-NULL (and otherwise the function died
with an appropriate error message).
Fix this by extending real_pathdup()'s signature to accept the
die_on_error flag and simply pass it through to strbuf_realpath(),
and then adjust all callers after a careful audit whether they would
handle NULLs well.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The err_fd descriptor passed to the unpack() function is
intended to be handed off to the child index-pack, and our
async muxer will read until it gets EOF. However, if we
encounter an error before handing off the descriptor, we
must manually close(err_fd). Otherwise we will be waiting
for our muxer to finish, while the muxer is waiting for EOF
on err_fd.
We fixed an identical deadlock already in 49ecfa13f
(receive-pack: close sideband fd on early pack errors,
2013-04-19). But since then, the function grew a new
early-return in 722ff7f87 (receive-pack: quarantine objects
until pre-receive accepts, 2016-10-03), when we fail to
create a temporary directory. This return needs the same
treatment.
Reported-by: Horst Schirmeier <horst@schirmeier.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare to reuse this code in transport.c for "git fetch".
While we're here, internationalize the existing error message.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we parse "git checkout $NAME", we try to interpret
$NAME as a local branch-name. If it is, then we point HEAD
to that branch. Otherwise, we detach the HEAD at whatever
commit $NAME points to.
We do the interpretation by calling strbuf_branchname(), and
then blindly sticking "refs/heads/" on the front. This leads
to nonsense results when expansions like "@{upstream}" or
"@" point to something besides a local branch. We end up
with a local branch name like "refs/heads/origin/master" or
"refs/heads/HEAD".
Normally this has no user-visible effect because those
branches don't exist, and so we fallback to feeding the
result to get_sha1(), which resolves them correctly.
But as the new test in t3204 shows, there are corner cases
where the effect is observable, and we check out the wrong
local branch rather than detaching to the correct one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use strbuf_branchname() to expand the branch name from
the command line, so you can delete the branch given by
@{-1}, for example. However, we allow other nonsense like
"@", and we do not respect our "-r" flag (so we may end up
deleting an oddly-named local ref instead of a remote one).
We can fix this by passing the appropriate "allowed" flag to
strbuf_branchname().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interpret_branch_name() function converts names like
@{-1} and @{upstream} into branch names. The expanded ref
names are not fully qualified, and may be outside of the
refs/heads/ namespace (e.g., "@" expands to "HEAD", and
"@{upstream}" is likely to be in "refs/remotes/").
This is OK for callers like dwim_ref() which are primarily
interested in resolving the resulting name, no matter where
it is. But callers like "git branch" treat the result as a
branch name in refs/heads/. When we expand to a ref outside
that namespace, the results are very confusing (e.g., "git
branch @" tries to create refs/heads/HEAD, which is
nonsense).
Callers can't know from the returned string how the
expansion happened (e.g., did the user really ask for a
branch named "HEAD", or did we do a bogus expansion?). One
fix would be to return some out-parameters describing the
types of expansion that occurred. This has the benefit that
the caller can generate precise error messages ("I
understood @{upstream} to mean origin/master, but that is a
remote tracking branch, so you cannot create it as a local
name").
However, out-parameters make the function interface somewhat
cumbersome. Instead, let's do the opposite: let the caller
tell us which elements to expand. That's easier to pass in,
and none of the callers give more precise error messages
than "@{upstream} isn't a valid branch name" anyway (which
should be sufficient).
The strbuf_branchname() function needs a similar parameter,
as most of the callers access interpret_branch_name()
through it.
We can break the callers down into two groups:
1. Callers that are happy with any kind of ref in the
result. We pass "0" here, so they continue to work
without restrictions. This includes merge_name(),
the reflog handling in add_pending_object_with_path(),
and substitute_branch_name(). This last is what powers
dwim_ref().
2. Callers that have funny corner cases (mostly in
git-branch and git-checkout). These need to make use of
the new parameter, but I've left them as "0" in this
patch, and will address them individually in follow-on
patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not all too unusual for a branch to use "branch.<name>.remote"
without "branch.<name>.merge". You may be using the 'push.default'
configuration set to 'current', for example, and do
$ git checkout -b side colleague/side
$ git config branch.side.remote colleague
However, "git remote rm" to remove the remote used in such a manner
fails with
"fatal: could not unset 'branch.<name>.merge'"
because it assumes that a branch that has .remote defined must also
have .merge defined. Detect the "cannot unset because it is not set
to begin with" case and ignore it.
Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"ls-files" run with pathspec has been micro-optimized to avoid
having to memmove(3) unnecessary bytes.
* rs/ls-files-partial-optim:
ls-files: move only kept cache entries in prune_cache()
ls-files: pass prefix length explicitly to prune_cache()
We make several starts_with() calls, only to advance
pointers. This is exactly what skip_prefix() is for, which
lets us avoid manually-counted magic numbers.
Helped-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-grep has always disallowed grepping in a tree (as
opposed to the working directory) with both --untracked
and --no-index. But we traditionally did so by first
collecting the revs, and then complaining when any were
provided.
The --no-index option recently learned to detect revs
much earlier. This has two user-visible effects:
- we don't bother to resolve revision names at all. So
when there's a rev/path ambiguity, we always choose to
treat it as a path.
- likewise, when you do specify a revision without "--",
the error you get is "no such path" and not "--untracked
cannot be used with revs".
The rationale for doing this with --no-index is that it is
meant to be used outside a repository, and so parsing revs
at all does not make sense.
This patch gives --untracked the same treatment. While it
_is_ meant to be used in a repository, it is explicitly
about grepping the non-repository contents. Telling the user
"we found a rev, but you are not allowed to use revs" is
not really helpful compared to "we treated your argument as
a path, and could not find it".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We resolve HEAD and copy the result to a fixed-size buffer
with memcpy, never checking that it actually fits. This bug
dates back to 8098a178b (Add git-symbolic-ref, 2005-09-30).
Before that we used readlink(), which took a maximum buffer
size.
We can fix this by using resolve_refdup(), which duplicates
the buffer on the heap. That also lets us just check
for a NULL pointer to see if we have resolved HEAD, and
drop the extra head_p variable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We copy the result of resolving HEAD into a buffer and keep
track of its length. But we never actually use the length
for anything besides the copy. Let's stop passing it around.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are using --no-index, then our arguments cannot be
revs in the first place. Not only is it pointless to
diagnose them, but if we are not in a repository, we should
not be trying to resolve any names.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We disallow the use of revisions with --no-index, but we
don't actually check and complain until well after we've
parsed the revisions.
This is the cause of a few problems:
1. We shouldn't be calling get_sha1() at all when we aren't
in a repository, as it might access the ref or object
databases. For now, this should generally just return
failure, but eventually it will become a BUG().
2. When there's a "--" disambiguator and you're outside a
repository, we'll complain early with "unable to resolve
revision". But we can give a much more specific error.
3. When there isn't a "--" disambiguator, we still do the
normal rev/path checks. This is silly, as we know we
cannot have any revs with --no-index. Everything we see
must be a path.
Outside of a repository this doesn't matter (since we
know it won't resolve), but inside one, we may complain
unnecessarily if a filename happens to also match a
refname.
This patch skips the get_sha1() call entirely in the
no-index case, and behaves as if it failed (with the
exception of giving a better error message).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we see "git grep pattern rev -- file" then we apply the
usual rev/pathspec disambiguation rules: any "rev" before
the "--" must be a revision, and we do not need to apply the
verify_non_filename() check.
But there are two bugs here:
1. We keep a seen_dashdash flag to handle this case, but
we set it in the same left-to-right pass over the
arguments in which we parse "rev".
So when we see "rev", we do not yet know that there is
a "--", and we mistakenly complain if there is a
matching file.
We can fix this by making a preliminary pass over the
arguments to find the "--", and only then checking the rev
arguments.
2. If we can't resolve "rev" but there isn't a dashdash,
that's OK. We treat it like a path, and complain later
if it doesn't exist.
But if there _is_ a dashdash, then we know it must be a
rev, and should treat it as such, complaining if it
does not resolve. The current code instead ignores it
and tries to treat it like a path.
This patch fixes both bugs, and tries to comment the parsing
flow a bit better.
It adds tests that cover the two bugs, but also some related
situations (which already worked, but this confirms that our
fixes did not break anything).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We loop over the arguments, but every branch of the loop
hits either a "continue" or a "break". Surely we can make
this simpler.
The final conditional is:
if (arg is a rev) {
... handle rev ...
continue;
}
break;
We can rewrite this as:
if (arg is not a rev)
break;
... handle rev ...
That makes the flow a little bit simpler, and will make
things much easier to follow when we add more logic in
future patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running a command of the form
git grep --no-index pattern -- path
in the absence of a Git repository, an error message will be printed:
fatal: BUG: setup_git_env called without repository
This is because "git grep" tries to interpret "--" as a rev. "git grep"
has always tried to first interpret "--" as a rev for at least a few
years, but this issue was upgraded from a pessimization to a bug in
commit 59332d1 ("Resurrect "git grep --no-index"", 2010-02-06), which
calls get_sha1 regardless of whether --no-index was specified. This bug
appeared to be benign until commit b1ef400 ("setup_git_env: avoid blind
fall-back to ".git"", 2016-10-20) when Git was taught to die in this
situation. (This "git grep" bug appears to be one of the bugs that
commit b1ef400 is meant to flush out.)
Therefore, always interpret "--" as signaling the end of options,
instead of trying to interpret it as a rev first.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, we set up the threads for grep before parsing
the non-option arguments. In 53b8d931b (grep: disable
threading in non-worktree case, 2011-12-12), the thread code
got bumped lower in the function because it now needed to
know whether we got any revision arguments.
That put a big block of code in between the parsing of revs
and the parsing of pathspecs, both of which share some loop
variables. That makes it harder to read the code than the
original, where the shared loops were right next to each
other.
Let's bump the thread initialization until after all of the
parsing is done.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A server can end up in a state where there are lots of unreferenced
loose objects (say, because many users are doing a bunch of rebasing
and pushing their rebased branches). Running "git gc --auto" in
this state would cause a gc.log file to be created, preventing
future auto gcs, causing pack files to pile up. Since many git
operations are O(n) in the number of pack files, this would lead to
poor performance.
Git should never get itself into a state where it refuses to do any
maintenance, just because at some point some piece of the maintenance
didn't make progress.
Teach Git to ignore gc.log files which are older than (by default)
one day old, which can be tweaked via the gc.logExpiry configuration
variable. That way, these pack files will get cleaned up, if
necessary, at least once per day. And operators who find a need for
more-frequent gcs can adjust gc.logExpiry to meet their needs.
There is also some cleanup: a successful manual gc, or a
warning-free auto gc with an old log file, will remove any old
gc.log files.
It might still happen that manual intervention is required
(e.g. because the repo is corrupt), but at the very least it won't
be because Git is too dumb to try again.
Signed-off-by: David Turner <dturner@twosigma.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't throw the memory allocated for remove_dir_recursively() away after
a single call, use it for the other entries as well instead.
This change was done before in deb8e15a (rm: reuse strbuf for all
remove_dir_recursively() calls), but was reverted as a side-effect of
55856a35 (rm: absorb a submodules git dir before deletion). Reinstate
the optimization.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prune_cache() first identifies those entries at the start of the sorted
array that can be discarded. Then it moves the rest of the entries up.
Last it identifies the unwanted trailing entries among the moved ones
and cuts them off.
Change the order: Identify both start *and* end of the range to keep
first and then move only those entries to the top. The resulting code
is slightly shorter and a bit more efficient.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function prune_cache() relies on the fact that it is only called on
max_prefix and sneakily uses the matching global variable max_prefix_len
directly. Tighten its interface by passing both the string and its
length as parameters. While at it move the NULL check into the function
to collect all cache-pruning related logic in one place.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `verbose` and `expire` options of the `git worktree prune`
subcommand have wrong descriptions in that they pretend to relate to
objects. But as the git-worktree(1) correctly states, these options have
nothing to do with objects but only with worktrees. Fix the description
accordingly.
Signed-off-by: Patrick Steinhardt <patrick.steinhardt@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
