In t7502.20, we run "git commit" and check that it warns us
that the author and committer identity are not the same
(this is always the case in the test environment, since we
set up the idents differently).
Instead of actually making a commit, we have a clean index,
so the "git commit" we run will fail. This is marked as
might_fail, which is not really correct; it will always fail
since there is nothing to commit.
However, the only reason not to do a complete commit would
be to see the intermediate state of the COMMIT_EDITMSG file
when the commit is not completed. We don't need to care
about this, though; even a complete commit will leave
COMMIT_EDITMSG for us to view. By doing a real commit and
dropping the might_fail, we are more robust against other
unforeseen failures of "git commit" that might influence our
test result.
It might seem less robust to depend on the fact that "git
commit" leaves COMMIT_EDITMSG in place after a successful
commit. However, that brings this test in line with others
parts of the script, which make the same assumption.
Furthermore, if that ever does change, the right solution is
not to prevent commit from completing, but to set EDITOR to
a script that will record the contents we see. After all,
the point of these tests is to check what the user sees in
their EDITOR, so that would be the most direct test. For
now, though, we can continue to use the "shortcut" that
COMMIT_EDITMSG is left intact.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7502.20 and t7502.21 check that the author and committer
name are mentioned in the commit message template under
certain circumstances. However, they end up checking a much
larger and unnecessary portion of the template. Let's narrow
their checks to the specific lines.
While we're at it, let's give these tests more descriptive
names, so their purposes are more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tests tries to ensure that editor is not run due
to an early failure. However, it needs to quote the pathname
of the trash directory used in $GIT_EDITOR, since git will
pass it along to the shell. In other words, the test would
pass whether the code was correct or not, since the unquoted
editor specification would never run.
We never noticed the problem because the code is indeed
correct, so git-commit never even tried to run the editor.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using write_script saves us a few lines of code, and means
we consistently use $SHELL_PATH.
We can also drop the setting of the $pwd variable from
$(pwd). In the first instance, there is no reason to use it
(we can just use $(pwd) directly two lines later, since we
are interpolating the here-document). In the second
instance, it is totally pointless and probably just a
cut-and-paste from the first instance.
Finally, we can use a non-interpolating here document for
the final script, which saves some quoting.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reorders t/test-lib.sh so that we dot-source GIT-BUILD-OPTIONS that
records the shell and Perl the user told us to use with Git a lot
early, so that test-lib.sh script itself can use "$PERL_PATH" in
one of its early operations.
* jc/test-lib-source-build-options-early:
test-lib: reorder and include GIT-BUILD-OPTIONS a lot earlier
Finishing touches to the XDG support (new feature for 1.7.12) and
tests.
* mm/config-xdg:
t1306: check that XDG_CONFIG_HOME works
ignore: make sure we have an xdg path before using it
attr: make sure we have an xdg path before using it
test-lib.sh: unset XDG_CONFIG_HOME
The combination of GIT_DIR and GIT_WORK_TREE can be used to manage
files in one directory hierarchy while keeping the repository that
keeps track of them outside the directory hierarchy. For example:
git init --bare /path/to/there
alias dotfiles="GIT_DIR=/path/to/there GIT_WORK_TREE=/path/to/here git"
cd /path/to/here
dotfiles add file
dotfiles commit -a -m "add /path/to/here/file"
...
lets you manage files under /path/to/here/ in the repository located
at /path/to/there.
git-submodule however fails to add submodules, as it is confused by
GIT_DIR and GIT_WORK_TREE environment variables when it tries to
work in the submodule, like so:
dotfiles submodule add http://path.to/submodule
fatal: working tree '/path/to/here' already exists.
Simply unsetting the environment where the command works on the
submodule is sufficient to fix this, as it has set things up so
that GIT_DIR and GIT_WORK_TREE do not even have to point at the
repository and the working tree of the submodule.
Signed-off-by: Daniel Graña <dangra@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark messages in git-rebase.sh for translation. While doing this
Jonathan noticed that the comma usage and sentence structure of the
resolvemsg was not quite right, so correct that and its cousins in
git-am.sh and t/t0201-gettext-fallbacks.sh at the same time.
Some tests would start to fail with GETTEXT_POISON turned on after
this update. Use test_i18ncmp and test_i18ngrep where appropriate
to mark strings that should only be checked in the C locale output
to avoid such issues.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running the http tests with valgrind does not work for two
reasons:
1. Apache complains about following the symbolic link from
git-http-backend to valgrind.sh.
2. Apache does not pass through the GIT_VALGRIND variable
to the backend CGI.
This patch fixes both problems. Unfortunately, there is a
slight hack we need to handle passing environment variables
through Apache. If we just tell it:
PassEnv GIT_VALGRIND
then Apache will complain when GIT_VALGRIND is not set. If
we try:
SetEnv GIT_VALGRIND ${GIT_VALGRIND}
then when GIT_VALGRIND is not set, it will pass through the
literal "${GIT_VALGRIND}". Instead, we now unconditionally
pass through GIT_VALGRIND from lib-httpd.sh into apache,
even if it is empty.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a bug with git rebase -i --root when a fixup or squash line is
applied to the new root. We attempt to amend the commit onto which they
apply with git reset --soft HEAD^ followed by a normal commit. Unlike a
real commit --amend, this sequence will fail against a root commit as it
has no parent.
Fix rebase -i to use commit --amend for fixup and squash instead, and
add a test for the case of a fixup of the root commit.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should override $HOME/.config, but we never actually tested it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e3ebc35 (config: fix several access(NULL) calls, 2012-07-12) was
fixing access(NULL) calls when trying to access $HOME/.config/git/config,
but missed the ones when trying to access $HOME/.config/git/ignore. Fix
and test this.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we don't have a core.attributesfile configured, we fall
back to checking XDG config, which is usually
$HOME/.config/git/attributes.
However, if $HOME is unset, then home_config_paths will return
NULL, and we end up calling fopen(NULL).
Depending on your system, this may or may not cause the
accompanying test to fail (e.g., on Linux and glibc, the
address will go straight to open, which will return EFAULT).
However, valgrind will reliably notice the error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that git respects XDG_CONFIG_HOME for some lookups, we
must be sure to cleanse the test environment. Otherwise, the
user's XDG_CONFIG_HOME could influence the test results.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --no-ext-diff" did not output anything for a typechange
filepair when GIT_EXTERNAL_DIFF is in effect.
* jv/maint-no-ext-diff:
diff: test precedence of external diff drivers
diff: correctly disable external_diff with --no-ext-diff
"commit --amend" used to refuse amending a commit with an empty log
message, with or without "--allow-empty-message".
* cw/amend-commit-without-message:
Allow edit of empty message with commit --amend
"git commit --amend --only --" was meant to allow "Clever" people to
rewrite the commit message without making any change even when they
have already changes for the next commit added to their index, but
it never worked as advertised since it was introduced in 1.3.0 era.
* jk/maint-commit-amend-only-no-paths:
commit: fix "--amend --only" with no pathspec
Even though the index can record pathnames longer than 1<<12 bytes,
in some places we were not comparing them in full, potentially
replacing index entries instead of adding.
* tg/maint-cache-name-compare:
cache_name_compare(): do not truncate while comparing paths
"git show"'s auto-walking behaviour was an unreliable and
unpredictable hack; it now behaves just like "git log" does when it
walks.
* tr/maint-show-walk:
show: fix "range implies walking"
Demonstrate git-show is broken with ranges
"git diff", "git status" and anything that internally uses the
comparison machinery was utterly broken when the difference
involved a file with "-" as its name. This was due to the way "git
diff --no-index" was incorrectly bolted on to the system, making
any comparison that involves a file "-" at the root level
incorrectly read from the standard input.
* jc/refactor-diff-stdin:
diff-index.c: "git diff" has no need to read blob from the standard input
diff-index.c: unify handling of command line paths
diff-index.c: do not pretend paths are pathspecs
We did not have test to make sure "git rebase" without extra options
filters out an empty commit in the original history.
* mz/empty-rebase-test:
add test case for rebase of empty commit
"git fast-export" produced an input stream for fast-import without
properly quoting pathnames when they contain SPs in them.
* js/fast-export-paths-with-spaces:
fast-export: quote paths with spaces
"git checkout --detach", when you are still on an unborn branch,
should be forbidden, but it wasn't.
* cw/no-detaching-an-unborn:
git-checkout: disallow --detach on unborn branch
Some implementations of Perl terminates "lines" with CRLF even when
the script is operating on just a sequence of bytes. Make sure to
use "$PERL_PATH", the version of Perl the user told Git to use, in
our tests to avoid unnecessary breakages in tests.
* vr/use-our-perl-in-tests:
t/README: add a bit more Don'ts
tests: enclose $PERL_PATH in double quotes
t/test-lib.sh: export PERL_PATH for use in scripts
t: Replace 'perl' by $PERL_PATH
* as/t4012-style-updates:
t4012: Use test_must_fail instead of if-else
t4012: use 'printf' instead of 'dd' to generate a binary file
t4012: Re-indent test snippets
t4012: Make --shortstat test more robust
t4012: Break up pipe into serial redirections
t4012: Actually quote the sed script
t4012: Unquote git command fragment in test title
t4012: modernize style for quoting
When "git submodule add" clones a submodule repository, it can get
confused where to store the resulting submodule repository in the
superproject's .git/ directory when there is a symbolic link in the
path to the current directory.
* jl/maint-1.7.10-recurse-submodules-with-symlink:
submodules: don't stumble over symbolic links when cloning recursively
Teaches the object name parser things like a "git describe" output
is always a commit object, "A" in "git log A" must be a committish,
and "A" and "B" in "git log A...B" both must be committish, etc., to
prolong the lifetime of abbreviated object names.
* jc/sha1-name-more: (27 commits)
t1512: match the "other" object names
t1512: ignore whitespaces in wc -l output
rev-parse --disambiguate=<prefix>
rev-parse: A and B in "rev-parse A..B" refer to committish
reset: the command takes committish
commit-tree: the command wants a tree and commits
apply: --build-fake-ancestor expects blobs
sha1_name.c: add support for disambiguating other types
revision.c: the "log" family, except for "show", takes committish
revision.c: allow handle_revision_arg() to take other flags
sha1_name.c: introduce get_sha1_committish()
sha1_name.c: teach lookup context to get_sha1_with_context()
sha1_name.c: many short names can only be committish
sha1_name.c: get_sha1_1() takes lookup flags
sha1_name.c: get_describe_name() by definition groks only commits
sha1_name.c: teach get_short_sha1() a commit-only option
sha1_name.c: allow get_short_sha1() to take other flags
get_sha1(): fix error status regression
sha1_name.c: restructure disambiguation of short names
sha1_name.c: correct misnamed "canonical" and "res"
...
In 1.7.9 era, we taught "git rebase" about the raw timestamp format
but we did not teach the same trick to "filter-branch", which rolled
a similar logic on its own. Because of this, "filter-branch" failed
to rewrite commits with ancient timestamps.
* jc/maint-filter-branch-epoch-date:
t7003: add test to filter a branch with a commit at epoch
date.c: Fix off by one error in object-header date parsing
filter-branch: do not forget the '@' prefix to force git-timestamp
There are three ways to specify an external diff command:
GIT_EXTERNAL_DIFF in the environment, diff.external in the
config, or a "diff" gitattribute. The current order of
precedence is:
1. gitattribute
2. GIT_EXTERNAL_DIFF
3. diff.external
Usually our rule is that environment variables should take
precedence over on-disk config (i.e., option 2 should come
before option 1). However, this situation is trickier than
some, because option 1 is more specific to the individual
file than option 2 (which affects all files), so it might be
preferable. So the current behavior can be seen as
implementing "do the specific thing if we can, but fall back
to this general thing".
This is probably not what we would do if we were writing git
from scratch, but it has been this way for several years,
and is not worth changing. So let's at least document that
this is the way it's supposed to work with a test.
While we're there, let's also make sure that diff.external
(which was not previously tested at all) works by running it
through the same tests as GIT_EXTERNAL_DIFF.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Upon seeing a type-change filepair, "diff --no-ext-diff" does not
show the usual "deletion followed by addition" split patch and does
not run the external diff driver either.
This is because the logic to disable external diff was placed at a
wrong level in the callchain. run_diff_cmd() decides to show the
split patch only when external diff driver is not configured or
specified via GIT_EXTERNAL_DIFF environment, but this is done before
checking if --no-ext-diff was given. To make things worse,
run_diff_cmd() checks --no-ext-diff and disables the output for such
a filepair completely, as the callchain below it (e.g. builtin_diff)
does not want to handle typechange filepairs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
79a9312 (commit-tree: update the command line parsing, 2011-11-09)
updated the command line parser to understand the usual "flags first
and then non-flag arguments" order, in addition to the original and
a bit unusual "tree comes first and then zero or more -p <parent>".
Unfortunately, ba3c69a (commit: teach --gpg-sign option, 2011-10-05)
broke it by mistake. Resurrect it, and protect the feature with a
test from future breakages.
Noticed by Keshav Kini
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the code less bulky and easier to read. Also do not overlook
failures like e.g. git failing because of unexpected signals.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For some reason, 'echo X | dd bs=1k seek=1' creates a file with 2050 bytes
on Windows instead of the expected 1026 bytes, so that a test fails. Since
the actual contents of the file are irrelevant as long as there is at
least one zero byte so that the diff machinery recognizes it as binary,
use printf to generate it.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most one-level indents were 1 HT (horizontal tab) followed by 1 SP.
Remove the SP.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --shortstat test depends on the same scenario as the --stat
test. Use the part of the same expected result for the --stat test
to avoid duplicating it manually.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not hide possible git errors by masking its process
exit status.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The nested quoting is not needed in this cases, thus the previous
version did work just fine. Nevertheless the usage is misleading,
so just achieve nested quoting by using double quotes instead. Lower
the probability of breakage in the future and make the code easier
to read.
NOTE: Just dropping the single quotes around the sed arguments would
have also been possible.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though the index can record pathnames longer than 1<<12 bytes,
in some places we were not comparing them in full, potentially
replacing index entries instead of adding.
* tg/maint-cache-name-compare:
cache_name_compare(): do not truncate while comparing paths
"git commit --amend --only --" was meant to allow "Clever" people to
rewrite the commit message without making any change even when they
have already changes for the next commit added to their index, but
it never worked as advertised since it was introduced in 1.3.0 era.
* jk/maint-commit-amend-only-no-paths:
commit: fix "--amend --only" with no pathspec
"commit --amend" used to refuse amending a commit with an empty log
message, with or without "--allow-empty-message".
* cw/amend-commit-without-message:
Allow edit of empty message with commit --amend
"git apply" learned to wiggle the base version and perform three-way
merge when a patch does not exactly apply to the version you have.
* jc/apply-3way:
apply: tests for the --3way option
apply: document --3way option
apply: allow rerere() to work on --3way results
apply: register conflicted stages to the index
apply: --3way with add/add conflict
apply: move verify_index_match() higher
apply: plug the three-way merge logic in
apply: fall back on three-way merge
apply: accept -3/--3way command line option
apply: move "already exists" logic to check_to_create()
apply: move check_to_create_blob() closer to its sole caller
apply: further split load_preimage()
apply: refactor "previous patch" logic
apply: split load_preimage() helper function out
apply: factor out checkout_target() helper function
apply: refactor read_file_or_gitlink()
apply: clear_image() clears things a bit more
apply: a bit more comments on PATH_TO_BE_DELETED
apply: fix an incomplete comment in check_patch()
"git rebase [-i] --root $tip" can now be used to rewrite all the
history down to the root.
* cw/rebase-i-root:
t3404: make test 57 work with dash and others
Add tests for rebase -i --root without --onto
rebase -i: support --root without --onto
Teach "git p4" to notice "Jobs:" in the log message and relay it to
Perforce to trigger its "jobs" support.
# By Pete Wyckoff
* pw/git-p4-jobs:
git p4: notice Jobs lines in git commit messages
git p4 test: refactor marshal_dump
git p4: remove unused P4Submit interactive setting
Due to the way "git diff --no-index" is bolted onto by touching the
low level code that is shared with the rest of the "git diff" code,
even though it has to work in a very different way, any comparison
that involves a file "-" at the root level incorrectly tried to read
from the standard input. This cleans up the no-index codepath
further to remove code that reads from the standard input from the
core side, which is never necessary when git is running its usual
diff operation.
* jc/refactor-diff-stdin:
diff-index.c: "git diff" has no need to read blob from the standard input
diff-index.c: unify handling of command line paths
diff-index.c: do not pretend paths are pathspecs
Teaches git to normalize pathnames read from readdir(3) and all
arguments from the command line into precomposed UTF-8 (assuming
that they come as decomposed UTF-8) to work around issues on Mac OS.
I think there still are other places that need conversion
(e.g. paths that are read from stdin for some commands), but this
should be a good first step in the right direction.
* tb/sanitize-decomposed-utf-8-pathname:
git on Mac OS and precomposed unicode
Fixes "git show"'s auto-walking behaviour, and make it behave just
like "git log" does when it walks.
* tr/maint-show-walk:
show: fix "range implies walking"
Demonstrate git-show is broken with ranges
Teach "am --rebasing" codepath to grab authorship, log message and
the patch text directly out of existing commits. This will help
rebasing commits that have confusing "diff" output in their log
messages.
* mz/rebase-no-mbox:
am: don't call mailinfo if $rebasing
am --rebasing: get patch body from commit, not from mailbox
rebase --root: print usage on too many args
rebase: don't source git-sh-setup twice
The test creates 16 objects that share the same prefix, and two other
objects that do not. Tweak the test so that the other two share the
same prefix that is different from the one that is shared by the 16.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For -M option (detectRenames) in P4Submit, use 'p4 move' rather
than 'p4 integrate'. Check Perforce server for exisitence of
'p4 move' and use it if present, otherwise revert to 'p4 integrate'.
[pw: wildcard-encode src/dest, add/update tests, tweak code]
Signed-off-by: Gary Gibbons <ggibbons@perforce.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running filter-branch on a history that has a commit with timestamp
at epoch used to fail, but it should have been fixed. Add test to
make sure it won't break again.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 69c3051 (submodules: refactor computation of relative gitdir path)
cloning a submodule recursively fails for nested submodules when a
symbolic link is part of the path to the work tree of the superproject.
This happens when module_clone() tries to find the relative paths between
the work tree and the git dir. When a symbolic link in current $PWD points
to a directory that is at a different level, then determining the number
of "../" needed to traverse to the superproject's work tree leads to a
wrong result.
As there is no portable way to say "pwd -P", use cd_to_toplevel to remove
the link from $PWD, which fixes this problem.
A test for this issue has been added to t7406.
Reported-by: Bob Halley <halley@play-bow.org>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some implementations of sed (e.g. MacOS X) have whitespaces in the
output of "wc -l" that reads from the standard input. Ignore these
whitespaces by not quoting the command substitution to be compared
with the constant "16".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command fragments are quoted nowhere else in title texts of
this file, thus make this one consistent with all other titles.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This quoting style is used by all newly added test code.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --no-index" did not correctly handle relative paths and
did not correctly give exit codes when run under "--quiet" option.
* th/diff-no-index-fixes:
diff-no-index: exit(1) if 'diff --quiet <repo file> <external file>' finds changes
diff: handle relative paths in no-index
"git clone --single-branch" to clone a single branch did not limit
the cloning to the specified branch.
* nd/clone-single-fix:
clone: fix ref selection in --single-branch --branch=xxx
"git diff COPYING HEAD:COPYING" gave a nonsense error message that
claimed that the treeish HEAD did not have COPYING in it.
* mm/verify-filename-fix:
verify_filename(): ask the caller to chose the kind of diagnosis
sha1_name: do not trigger detailed diagnosis for file arguments
We failed to use ce_namelen() equivalent and instead only compared
up to the CE_NAMEMASK bytes by mistake. Adding an overlong path
that shares the same common prefix as an existing entry in the index
did not add a new entry, but instead replaced the existing one, as
the result.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we do not have any pathspec, we typically disallow an
explicit "--only", because it makes no sense (your commit
would, by definition, be empty). But since 6a74642
(git-commit --amend: two fixes., 2006-04-20), we have
allowed "--amend --only" with the intent that it would amend
the commit, ignoring any contents staged in the index.
However, while that commit allowed the combination, we never
actually implemented the logic to make it work. The current
code notices that we have no pathspec and assumes we want to
do an as-is commit (i.e., the "--only" is ignored).
Instead, we must make sure to follow the partial-commit
code-path. We also need to tweak the list_paths function to
handle a NULL pathspec.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new option allows you to feed an ambiguous prefix and enumerate
all the objects that share it as a prefix of their object names.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is not strictly correct, in that resetting selected index
entries from corresponding paths out of a given tree without moving
HEAD is a valid operation, and in such case a tree-ish would suffice.
But the existing code already requires a committish in the codepath,
so let's be consistent with it for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "index" line read from the patch to reconstruct a partial
preimage tree records the object names of blob objects.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the revision parser that in "$name:$path" (used for a
blob object name), "$name" must be a tree-ish.
There are many more places where we know what types of objects are
called for. This patch adds support for "commit", "treeish", "tree",
and "blob", which could be used in the following contexts:
- "git apply --build-fake-ancestor" reads the "index" lines from
the patch; they must name blob objects (not even "blob-ish");
- "git commit-tree" reads a tree object name (not "tree-ish"), and
zero or more commit object names (not "committish");
- "git reset $rev" wants a committish; "git reset $rev -- $path"
wants a treeish.
They will come in later patches in the series.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a field to setup_revision_opt structure and allow these callers
to tell the setup_revisions command parsing machinery that short SHA1
it encounters are meant to name committish.
This step does not go all the way to connect the setup_revisions()
to sha1_name.c yet.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many callers know that the user meant to name a committish by
syntactical positions where the object name appears. Calling this
function allows the machinery to disambiguate shorter-than-unique
abbreviated object names between committish and others.
Note that this does NOT error out when the named object is not a
committish. It is merely to give a hint to the disambiguation
machinery.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We know that the token "$name" that appear in "$name^{commit}",
"$name^4", "$name~4" etc. can only name a committish (either a
commit or a tag that peels to a commit). Teach get_short_sha1() to
take advantage of that knowledge when disambiguating an abbreviated
SHA-1 given as an object name.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach get_describe_name() to pass the disambiguation hint down the
callchain to get_short_sha1().
Also add tests to show various syntactic elements that we could take
advantage of the object type information to help disambiguration of
abbreviated object names. Many of them are marked as broken, and
some of them will be fixed in later patches in this series.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now we have all the necessary logic to fall back on three-way merge when
the patch does not cleanly apply, insert the conflicted entries to the
index as appropriate. This obviously triggers only when the "--index"
option is used.
When we fall back to three-way merge and some of the merges fail, just
like the case where the "--reject" option was specified and we had to
write some "*.rej" files out for unapplicable patches, exit the command
with non-zero status without showing the diffstat and summary. Otherwise
they would make the list of problematic paths scroll off the display.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Begin teaching the three-way merge fallback logic "git am -3" uses
to the underlying "git apply". It only implements the command line
parsing part, and does not do anything interesting yet, other than
making sure that "--reject" and "--3way" are not given together, and
making "--3way" imply "--index".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git commit --amend" used on a commit with an empty message fails
unless -m is given, whether or not --allow-empty-message is
specified.
Allow it to proceed to the editor with an empty commit message.
Unless --allow-empty-message is in force, it will still abort later
if an empty message is saved from the editor (this check was
already necessary to prevent a non-empty commit message being edited
to an empty one).
Add a test for --amend --edit of an empty commit message which fails
without this fix, as it's a rare case that won't get frequently
tested otherwise.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We did not have test to make sure "git rebase" without extra options
filters out an empty commit in the original history.
* mz/empty-rebase-test:
add test case for rebase of empty commit
More "git p4" tests.
* pw/git-p4-tests:
git p4 test: fix badp4dir test
git p4 test: split up big t9800 test
git p4 test: cleanup_git should make a new $git
git p4 test: copy source indeterminate
git p4 test: check for error message in failed test
git p4 test: rename some "git-p4 command" strings
git p4 test: never create default test repo
git p4 test: simplify quoting involving TRASH_DIRECTORY
git p4 test: use real_path to resolve p4 client symlinks
git p4 test: wait longer for p4d to start and test its pid
"git fast-export" produced an input stream for fast-import without
properly quoting pathnames when they contain SPs in them.
* js/fast-export-paths-with-spaces:
fast-export: quote paths with spaces
"git checkout --detach", when you are still on an unborn branch,
should be forbidden, but it wasn't.
* cw/no-detaching-an-unborn:
git-checkout: disallow --detach on unborn branch
Some implementations of Perl terminates "lines" with CRLF even when
the script is operating on just a sequence of bytes. Make sure to
use "$PERL_PATH", the version of Perl the user told Git to use, in
our tests to avoid unnecessary breakages in tests.
* vr/use-our-perl-in-tests:
t/README: add a bit more Don'ts
tests: enclose $PERL_PATH in double quotes
t/test-lib.sh: export PERL_PATH for use in scripts
t: Replace 'perl' by $PERL_PATH
Expose the credential API to scripted Porcelain writers.
* mm/credential-plumbing:
git-remote-mediawiki: update comments to reflect credential support
git-remote-mediawiki: add credential support
git credential fill: output the whole 'struct credential'
add 'git credential' plumbing command
Teach git to read various information from $XDG_CONFIG_HOME/git/ to allow
the user to avoid cluttering $HOME.
* mm/config-xdg:
config: write to $XDG_CONFIG_HOME/git/config file when appropriate
Let core.attributesfile default to $XDG_CONFIG_HOME/git/attributes
Let core.excludesfile default to $XDG_CONFIG_HOME/git/ignore
config: read (but not write) from $XDG_CONFIG_HOME/git/config file
Mac OS X mangles file names containing unicode on file systems HFS+,
VFAT or SAMBA. When a file using unicode code points outside ASCII
is created on a HFS+ drive, the file name is converted into
decomposed unicode and written to disk. No conversion is done if
the file name is already decomposed unicode.
Calling open("\xc3\x84", ...) with a precomposed "Ä" yields the same
result as open("\x41\xcc\x88",...) with a decomposed "Ä".
As a consequence, readdir() returns the file names in decomposed
unicode, even if the user expects precomposed unicode. Unlike on
HFS+, Mac OS X stores files on a VFAT drive (e.g. an USB drive) in
precomposed unicode, but readdir() still returns file names in
decomposed unicode. When a git repository is stored on a network
share using SAMBA, file names are send over the wire and written to
disk on the remote system in precomposed unicode, but Mac OS X
readdir() returns decomposed unicode to be compatible with its
behaviour on HFS+ and VFAT.
The unicode decomposition causes many problems:
- The names "git add" and other commands get from the end user may
often be precomposed form (the decomposed form is not easily input
from the keyboard), but when the commands read from the filesystem
to see what it is going to update the index with already is on the
filesystem, readdir() will give decomposed form, which is different.
- Similarly "git log", "git mv" and all other commands that need to
compare pathnames found on the command line (often but not always
precomposed form; a command line input resulting from globbing may
be in decomposed) with pathnames found in the tree objects (should
be precomposed form to be compatible with other systems and for
consistency in general).
- The same for names stored in the index, which should be
precomposed, that may need to be compared with the names read from
readdir().
NFS mounted from Linux is fully transparent and does not suffer from
the above.
As Mac OS X treats precomposed and decomposed file names as equal,
we can
- wrap readdir() on Mac OS X to return the precomposed form, and
- normalize decomposed form given from the command line also to the
precomposed form,
to ensure that all pathnames used in Git are always in the
precomposed form. This behaviour can be requested by setting
"core.precomposedunicode" configuration variable to true.
The code in compat/precomposed_utf8.c implements basically 4 new
functions: precomposed_utf8_opendir(), precomposed_utf8_readdir(),
precomposed_utf8_closedir() and precompose_argv(). The first three
are to wrap opendir(3), readdir(3), and closedir(3) functions.
The argv[] conversion allows to use the TAB filename completion done
by the shell on command line. It tolerates other tools which use
readdir() to feed decomposed file names into git.
When creating a new git repository with "git init" or "git clone",
"core.precomposedunicode" will be set "false".
The user needs to activate this feature manually. She typically
sets core.precomposedunicode to "true" on HFS and VFAT, or file
systems mounted via SAMBA.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
P4 has a feature called "jobs" that allows linking changes
to a bug tracking system or other tasks. When submitting
code, a job name can be specified to mark that this change
is associated with a particular job.
Teach git-p4 to find an optional "Jobs:" line in git commit
messages and use them to make a Jobs section in the p4
change specifitation.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function will be useful in future tests. Move it to
the git-p4 test library. Let it accept an optional argument
to pick a certain marshaled object out of the input stream.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct
VAR=value test_must_fail command args
works only for some shells (such as bash) but not others (such as dash)
because VAR=value does not end up in the environment for command when it
is called by the shell function test_must_fail. That is why we explicitly
set and export variable in a subshell, i.e.
(
VAR=value &&
export VAR &&
test_must_fail command args
)
in most places already, bar the newly introduced 57 from b64b7fe
(Add tests for rebase -i --root without --onto, 2012-06-26).
Make test 57 use that construct also.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --single-branch" to clone a single branch did not limit
the cloning to the specified branch.
* nd/clone-single-fix:
clone: fix ref selection in --single-branch --branch=xxx
"git diff --no-index" did not correctly handle relative paths and
did not give correct exit codes when run under "--quiet" option.
* th/diff-no-index-fixes:
diff-no-index: exit(1) if 'diff --quiet <repo file> <external file>' finds changes
diff: handle relative paths in no-index
When we get disconnected while expecting a response from the remote
side because authentication failed, we issued an error message "The
remote side hung up unexpectedly."
Give hint that it may be a permission problem in the message when we
can reasonably suspect it.
* hv/remote-end-hung-up:
remove the impression of unexpectedness when access is denied
Only "diff --no-index -" does. Bolting the logic into the low-level
function diff_populate_filespec() was a layering violation from day
one. Move populate_from_stdin() function out of the generic diff.c
to its only user, diff-index.c.
Also make sure "-" from the command line stays a special token "read
from the standard input", even if we later decide to sanitize the
result from prefix_filename() function in a few obvious ways,
e.g. removing unnecessary "./" prefix, duplicated slashes "//" in
the middle, etc.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split a rather heavy-ish "git completion" script out to create a
separate "git prompting" script, to help lazy-autoloading of the
completion part while making prompting part always available.
Teach "git submodule" deal with nested submodule structure where a
module is contained within a module whose origin is specified as a
relative URL to its superproject's origin.
The construct used to get the return code was flawed, in that
errors in the &&-chain before the semicolon were not caught. Use
the standard test_expect_code instead.
Set PATH in a subshell instead of relying on the bashism of
setting it just for a single command.
And fix the grep line so it doesn't worry about grep segfaults,
and doesn't fail for i18n issues.
Reported-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original t9800 test code has a mix of assorted topics, some
of which are big enough to deserve their own homes.
Interdependencies between the topics make it confusing when
trying to study one in isolation. And it takes so long to run
that debugging an individual test is difficult.
Split out three big chunks of tests into their own files:
t9812-git-p4-wildcards.sh gets the 8 p4 wildcard tests
t9813-git-p4-preserve-users.sh gets the 4 --preserve-user tests
t9814-git-p4-rename.sh gets the 2 copy and rename tests
Test 9800 execution time drops from 29 sec to 9 sec. The
sequential time to run all tests is a slower due to the three
extra p4d startup/shutdown sequences, but the overall parallel
execution time is about the same, at 52 sec.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For convenience, leave one in place at the end of each
test so that it is not necessary to build a new one. This
makes it consistent with $cli.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Msysgit testing showed that the source file found by copy
detection is indeterminate when there are multiple sources
to choose from. This appears to be valid. Adjust the test
so that it passes if it finds any of the potential copy sources.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For temporary files that are created in the top-level TRASH_DIRECTORY,
trust that the tests do not chdir except in subshells, and avoid some
quoting.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The p4 program is finicky about making sure the recorded client Root
matches the current working directory. The way it discovers the latter
seems to be to inspect shell variable $PWD. This could involve symlinks,
that while leading to the same place as the client Root, look different,
and cause p4 to fail.
Resolve all client paths using "test-path-utils real_path $path". This
removes ".." and resolves all symlinks.
Discovered while running with --root=/dev/shm, which is a link to
/run/shm.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running tests at high parallelism on a slow machine, 5 sec is
not enough to wait for p4d to start. Change it to 5 minutes,
adding an environment variable P4D_START_PATIENCE to shrink
that if needed in automated test environments.
Also check if the pid of the p4d that we started is still
around. If not, quit waiting for it immediately.
Remove all the confusing && chaining and simplify the code.
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A path containing a space must be quoted when used as an
argument to either the copy or rename commands (because
unlike other commands, the path is not the final thing on
the line for those commands).
Commit 6280dfdc3b (fast-export: quote paths in output,
2011-08-05) previously attempted to fix fast-export's
quoting by passing all paths through quote_c_style().
However, that function does not consider the space to be a
character which requires quoting, so let's special-case the
space inside print_path(). This will cause space-containing
paths to also be quoted in other commands where such quoting
is not strictly necessary, but it does not hurt to do so.
The test from 6280dfdc3b did not detect this because, while
it does introduce renames in the export stream, it does not
actually turn on rename detection, so they were presented as
pairs of deletions/adds. Using "-M" reveals the bug.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test for likely breakages in t3404, including successful reordering of
non-conflicting changes with a new root, correct preservation of commit
message and author in a root commit when it is squashed with the
sentinel, and presence of the sentinel following a conflicting
cherry-pick of a new root.
Remove test_must_fail for git rebase --root without --onto from t3412 as
this case will now be successfully handled by an implicit git rebase -i.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rebasing a commit that contains a diff in the commit message results
in a failure with output such as
First, rewinding head to replay your work on top of it...
Applying: My cool patch.
fatal: sha1 information is lacking or useless
(app/controllers/settings_controller.rb).
Repository lacks necessary blobs to fall back on 3-way merge.
Cannot fall back to three-way merge.
Patch failed at 0001 My cool patch.
The reason is that 'git rebase' without -p/-i/-m internally calls 'git
format-patch' and pipes the output to 'git am --rebasing', which has
no way of knowing what is a real patch and what is a commit message
that contains a patch.
Make 'git am' while in --rebasing mode get the patch body from the
commit object instead of extracting it from the mailbox.
Patch by Junio, test case and commit log message by Martin.
Reported-by: anikey <arty.anikey@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like
git rebase --onto newbase upstream branch error
displays the usage message, so should clearly
git rebase --onto newbase --root branch error
, but it doesn't. Instead, it ignores both "branch" and "error" and
rebases the current HEAD. This is because we try to match the number
of remainging arguments "$#", which fails to match "1" argument and
matches the "*" that really should have been a "0".
Make sure we display usage information when too many arguments are
given. Also fail-fast in case of similar bugs in the future by
matching on exactly 0 arguments and failing on unknown numbers.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
abe199808c (git checkout -b: allow switching out of an unborn branch)
introduced a bug demonstrated by
git checkout --orphan foo
git checkout --detach
git symbolic-ref HEAD
which gives 'refs/heads/(null)'.
This happens because we strbuf_addf(&branch_ref, "refs/heads/%s",
opts->new_branch) when opts->new_branch can be NULL for --detach.
Catch and forbid this case, adding a test to t2017 to catch it in
future.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of outputing only the username and password, print all the
attributes, even those that already appeared in the input.
This is closer to what the C API does, and allows one to take the exact
output of "git credential fill" as input to "git credential approve" or
"git credential reject".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The credential API is in C, and not available to scripting languages.
Expose the functionalities of the API by wrapping them into a new
plumbing command "git credentials".
In other words, replace the internal "test-credential" by an official Git
command.
Most documentation writen by: Jeff King <peff@peff.net>
Signed-off-by: Pavel Volek <Pavel.Volek@ensimag.imag.fr>
Signed-off-by: Kim Thuat Nguyen <Kim-Thuat.Nguyen@ensimag.imag.fr>
Signed-off-by: Javier Roucher Iglesias <Javier.Roucher-Iglesias@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git to write to $XDG_CONFIG_HOME/git/config if
- it already exists,
- $HOME/.gitconfig file doesn't, and
- The --global option is used.
Otherwise, write to $HOME/.gitconfig when the --global option is
given, as before.
If the user doesn't create $XDG_CONFIG_HOME/git/config, there is
absolutely no change. Users can use this new file only if they want.
If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/config
will be used.
Advice for users who often come back to an old version of Git: you
shouldn't create this file.
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This gives the default value for the core.attributesfile variable
following the exact same logic of the previous change for the
core.excludesfile setting.
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To use the feature of core.excludesfile, the user needs:
1. to create such a file,
2. and add configuration variable to point at it.
Instead, we can make this a one-step process by choosing a default value
which points to a filename in the user's $HOME, that is unlikely to
already exist on the system, and only use the presence of the file as a
cue that the user wants to use that feature.
And we use "${XDG_CONFIG_HOME:-$HOME/.config/git}/ignore" as such a
file, in the same directory as the newly added configuration file
("${XDG_CONFIG_HOME:-$HOME/.config/git}/config). The use of this
directory is in line with XDG specification as a location to store
such application specific files.
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git to read the "gitconfig" information from a new location,
$XDG_CONFIG_HOME/git/config; this allows the user to avoid
cluttering $HOME with many per-application configuration files.
In the order of reading, this file comes between the global
configuration file (typically $HOME/.gitconfig) and the system wide
configuration file (typically /etc/gitconfig).
We do not write to this new location (yet).
If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/config
will be used. This is in line with XDG specification.
If the new file does not exist, the behavior is unchanged.
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This dot-sources GIT-BUILD-OPTIONS a lot earlier in test-lib.sh so
that its use of "perl" can use "$PERL_PATH" to choose the version of
Perl the user told us is suitable for our use.
This is iffy; I didn't check it very carefully, and I would not be
surprised if there are subtle breakages.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a few more advices that we often have to give to new test
writers.
Also update an example where a double quote pair is used to enclose
a test body to use a single quote pair, which is more readable and
more importantly gives saner semantics for variable substitution.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise it will be split at a space after "Program" when it is set
to "\\Program Files\perl" or something silly like that.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most notably, t4031 creates a small shell script that invokes perl
and we want to use "$PERL_PATH" to name the version of Perl suitable
for our use, read from GIT-BUILD-OPTS. The test would fail when it
is directly run in t/ directory from the shell or "make" is run in t/
directory.
This problem was hidden from "make test" run in the top-level
directory, because its Makefile exports PERL_PATH.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for flipping the default to the "simple" mode from
the "matching" mode that is the historical default, start warning
users when they rely on unconfigured "git push" to default to the
"matching" mode.
Also, advertise for 'simple' where 'current' and 'upstream' are advised.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- do not fetch HEAD
- do not also fetch refs following "xxx"
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running 'git diff --quiet <file1> <file2>', if file1 or file2
is outside the repository, it will exit(0) even if the files differ.
It should exit(1) when they differ.
This happens because 'diff_no_index' looks at the 'found_changes'
member from 'diff_options' to determine if changes were made. This
is the wrong thing to do, since it is only set if xdiff is actually
run and it finds a change (the diff machinery will optimize out the
xdiff call when it is not necessary) and in that case HAS_CHANGED
flag needs to be taken into account.
Use diff_result_code() that knows all these details for the correct
exit value instead.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When diff-no-index is given a relative path to a file outside the
repository, it aborts with error. However, if the file is given
using an absolute path, the diff runs as expected. The two cases
should be treated the same.
Tests and commit message by Tim Henigan.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --local $path" started its life as an experiment to
optionally use link/copy when cloning a repository on the disk, but
we didn't deprecate it after we made the option a no-op to always
use the optimization.
The command learns "--no-local" option to turn this off, as a more
explicit alternative over use of file:// URL.
* jk/clone-local:
clone: allow --no-local to turn off local optimizations
docs/clone: mention that --local may be ignored
The __gitdir() helper function finds out the path of the git
repository by running 'git rev-parse --git-dir'. However, it has a
shortcut first to avoid the overhead of running a git command in a
subshell when the current directory is at the top of the work tree,
i.e. when it contains a '.git' subdirectory.
If the 'GIT_DIR' environment variable is set then it specifies the
path to the git repository, and the autodetection of the '.git'
directory is not necessary. However, $GIT_DIR is only taken into
acocunt by 'git rev-parse --git-dir', and the check for the '.git'
subdirectory is performed first, so it wins over the path given in
$GIT_DIR.
There are several completion (helper) functions that depend on
__gitdir(), and when the above case triggers the completion script
will do weird things, like offering refs, aliases, or stashes from a
different repository, or displaying wrong or broken prompt, etc.
So check first whether $GIT_DIR is set, and only proceed with checking
the '.git' directory in the current directory if it isn't. 'git
rev-parse' would also check whether the path in $GIT_DIR is a proper
'.git' directory, i.e. 'HEAD', 'refs/', and 'objects/' are present and
accessible, but we don't have to be that thorough for the bash prompt.
And we've lived with an equally permissive check for '.git' in the
current working directory for years anyway.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic of git-show has remained largely unchanged since around
5d7eeee (git-show: grok blobs, trees and tags, too, 2006-12-14): start
a revision walker with no_walk=1, look at its pending objects and
handle them one-by-one. For commits, this means stuffing them into a
new queue all alone, and running the walker.
Then Linus's f222abd (Make 'git show' more useful, 2009-07-13) came
along and set no_walk=0 whenever the user specifies a range. Which
appears to work fine, until you actually prod it hard enough, as the
preceding commit shows: UNINTERESTING commits will be marked as such,
but not walked further to propagate the marks.
Demonstrate this with the main tests of this patch: 'showing a range
walks (Y shape)'. The Y shape of history ensures that propagating the
UNINTERESTING marks is necessary to correctly exclude the main1
commit. The only example I could find actually requires that the
negative revisions are listed later, and in this scenario a dotted
range actually works. However, it is easy to find examples in git.git
where a dotted range is wrong, e.g.
$ git show v1.7.0..v1.7.1 | grep ^commit | wc -l
1297
$ git rev-list v1.7.0..v1.7.1 | wc -l
702
While there, also test a few other things that are not covered so far:
the -N way of triggering a range (added in 5853cae, DWIM 'git show -5'
to 'git show --do-walk -5', 2010-06-01), and the interactions of tags,
commits and ranges.
Pointed out by Dr_Memory on #git.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a server accessed through ssh is denying access git will currently
issue the message
"fatal: The remote end hung up unexpectedly"
as the last line. This sounds as if something really ugly just happened.
Since this is a quite typical situation in which users regularly get
we do not say that if it happens at the beginning when reading the
remote heads.
If its in the very first beginning of reading the remote heads it is
very likely an authentication error or a missing repository.
If it happens later during reading the remote heads we still indicate
that it happened during this initial contact phase.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify_filename() can be called in two different contexts. Either we
just tried to interpret a string as an object name, and it fails, so
we try looking for a working tree file (i.e. we finished looking at
revs that come earlier on the command line, and the next argument
must be a pathname), or we _know_ that we are looking for a
pathname, and shouldn't even try interpreting the string as an
object name.
For example, with this change, we get:
$ git log COPYING HEAD:inexistant
fatal: HEAD:inexistant: no such path in the working tree.
Use '-- <path>...' to specify paths that do not exist locally.
$ git log HEAD:inexistant
fatal: Path 'inexistant' does not exist in 'HEAD'
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diagnose_invalid_sha1_path() is meant to be called to diagnose a
misspelt <treeish>:<pathname> when <pathname> does not exist in
<treeish>. However, the code may call it if <treeish>:<pathname> is
invalid (which triggers another call with only_to_die == 1), but for
another reason. This happens when calling e.g.
git log existing-file HEAD:existing-file
because existing-file is a path and not a revision, the code
verifies that the arguments that follow to be paths. This leads to
an incorrect message like "existing-file does not exist in HEAD",
even though the path exists in HEAD.
Check that the search for <pathname> in <treeish> fails before
triggering the diagnosis.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not mix byte and line counts. Binary files have byte counts;
skip them when accumulating line insertions/deletions.
The regression was introduced in e18872b.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recently introduced test uses an absolute path. But when run on Windows
using the MSYS bash, such a path is mangled into a Windows style path when
it is passed to 'git config'. The subsequent 'test' then compares the
mangled path to the unmangled version and reports a failure.
A path beginning with two slashes denotes a network directory
(//server/share path) and is not mangled. Use that trick to side-step the
issue. Just in case that 'git submodule init' regresses in such a way that
it accesses the URL, use a path name that is unlikely to exist on POSIX
systems, and that cannot be a server name on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new informative help messages at the output of 'git status' when
the user is splitting a commit. The code figures this state by
comparing the contents of the following files in the .git/ directory:
- HEAD
- ORIG_HEAD
- rebase-merge/amend
- rebase-merge/orig-head
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The display of the advice '(use git add/rm [...])' (when there are
unmerged files) after running 'git status' is now depending of the
mark, whether it's 'both deleted', 'deleted by us/them' or others. For
instance, when there is just one file that's marked as 'both deleted',
'git status' shows '(use git rm [...])' and if there are two files,
one as 'both deleted' and the other as 'added by them', the advice is
'(use git add/rm [...])'.
The previous tests in t7512-status-help.sh are updated.
Test about the case of only 'both deleted' is added in
t7060-wtstatus.sh
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following tests include several cases in which the user needs to
run 'git status' to know his current situation, whether there're
conflicts or he's in rebase/bisect/am/cherry-pick progress.
One of the test is about the set of the advice.statushints config key
to 'false' in .git/config.
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch provides new informative help messages in the display of
'git status' (at the top) during conflicts, rebase, am, bisect or
cherry-pick process.
The new messages are not shown when using options such as -s or
--porcelain. The messages about the current situation of the user are
always displayed but the advices on what the user needs to do in order
to resume a rebase/bisect/am/commit after resolving conflicts can be
hidden by setting advice.statushints to 'false' in the config file.
Thus, information about the updated advice.statushints key are added
in Documentation/config.txt.
Also, the test t7060-wt-status.sh is now working with the new help
messages. Tests about suggestions of "git rm" are also added.
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During an interactive rebase session, it is sometimes desirable to
run tests on each commit in the resulting history. This can be done
by adding "exec <test command>" when editing the insn sheet, but the
command used for testing is often the same for all resulting commits.
By passing "--exec <cmd>" from the command line, automatically add
these "exec" lines after each commit in the final history. To work
well with the --autosquash option, these are added at the end of
each run of "fixup" and "squash".
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7f02f3d7 (completion: rename internal helpers _git and _gitk,
2012-05-19) renamed said functions to _main_git() and _main_gitk(),
respectively. By convention the name of our git-completion-specific
functions start with '_git' or '__git' prefix, so rename those
functions once again to put them back into our "namespace". Use the
two underscore prefix, because _git_main() could be mistaken for the
completion function of the (not yet existing) 'git main' command.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The If-Modified-Since support in Gitweb is conditional on the
availability of a date parser from either the HTTP::Date or
Time::ParseDate modules. If a suitable parser is not available,
then the corresponding 'modification times' tests should be skipped.
Introduce the DATE_PARSER test prerequisite and use it to skip
all of the dependent tests.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT-BUILD-OPTIONS defines PERL_PATH to be used in the test suite. Only a
few tests already actually use this variable when perl is needed. The
other test just call 'perl' and it might happen that the wrong perl
interpreter is used.
This becomes problematic on Windows, when the perl interpreter that is
compiled and installed on the Windows system is used, because this perl
interpreter might introduce some unexpected LF->CRLF conversions.
This patch makes sure that $PERL_PATH is used everywhere in the test suite
and that the correct perl interpreter is used.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tone down the lines that credit people involved and make them
comments, so that integrators who edit their merge messages can
still make use of the information, but lazy ones will not leave
the unverified guesses placed on the "via" line.
* jc/fmt-merge-msg-people:
fmt-merge-msg: make attribution into comment lines
t1304 first runs setfacl as an experiment to see whether the
filesystem supports ACLs, and skips the remaining tests if
it does not. However, our setfacl run did not exercise the
ACLs very well, and some filesystems may support our initial
setfacl, but not the rest of the test.
In particular, some versions of ecryptfs will erroneously
apply the umask on top of an inherited directory ACL,
causing our tests to fail. Let's be more careful and make
sure both that we can read back the user ACL we set, and
that the inherited ACL is propagated correctly. The latter
catches the ecryptfs bug, but may also catch other bugs
(e.g., an implementation which does not handle inherited
ACLs at all).
Since we're making the setup more complex, let's move it
into its own test. This will hide the output for us unless
the user wants to run "-v" to see it (and we don't need to
bother printing anything about setfacl failing; the
remaining tests will properly print "skip" due to the
missing prerequisite).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The submaintainer credit is not something you can compute purely by
looking at the history and its shape, especially in the presense of
fast-forward merges, and this observation makes the information on
the "via" line unreliable. Let's leave the final determination of
credits up to whoever is making the merge and show them as comments.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently git submodule init and git submodule sync fail with an error
if the superproject origin URL is of the form foo but succeed if the
superproject origin URL is of the form ./foo or ./foo/bar or foo/bar.
This change makes handling of the foo case behave like the handling
of the ./foo case and also ensures that superfluous leading and
embedded ./'s are removed from the resulting derived URLs.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the origin URL of the superproject is itself relative, git submodule sync
configures the remote.origin.url configuration property of the submodule
with a path that is relative to the work tree of the superproject
rather than the work tree of the submodule.
To fix this an 'up_path' that navigates from the work tree of the submodule
to the work tree of the superproject needs to be prepended to the URL
otherwise calculated.
Correct handling of superproject origin URLs like foo, ./foo and ./foo/bar is
left to a subsequent patch since an additional change is required to handle
these cases.
The documentation of resolve_relative_url() is expanded to give a more thorough
description of the function's objective.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Breaks in a test assertion's && chain can potentially hide failures
from earlier commands in the chain. Fix an instance of this in the
setup.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git rebase" was given a bad commit to replay the history on,
its error message did not correctly give the command line argument
it had trouble parsing.
By Erik Faye-Lund
* ef/maint-rebase-error-message:
rebase: report invalid commit correctly
This test case documents several cases where handling of relative
superproject origin URLs doesn't produce an expected result.
submodule.{sub}.url in the superproject is incorrect in these cases:
foo
./foo
./foo/bar
The remote.origin.url of the submodule is incorrect in the above cases
and also when the superproject origin URL is like:
foo/bar
../foo
../foo/bar
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some additional tests are added to support regression testing of the changes in the
remainder of the series.
We also add a pristine copy of .gitmodules in anticipation of this being
required by later tests.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep -e '$pattern'", unlike the case where the patterns are read from
a file, did not treat individual lines in the given pattern argument as
separate regular expressions as it should.
By René Scharfe
* rs/maint-grep-F:
grep: stop leaking line strings with -f
grep: support newline separated pattern list
grep: factor out do_append_grep_pat()
grep: factor out create_grep_pat()
An author/committer name that is a single character was mishandled as an
invalid name by mistake.
By Jeff King
* jk/ident-split-fix:
fix off-by-one error in split_ident_line
In 9765b6a (rebase: align variable content, 2011-02-06), the code
to error out was moved up one level. Unfortunately, one reference
to a function parameter wasn't rewritten as it should, leading to
the wrong parameter being errored on.
This error was propagated by 71786f5 (rebase: factor out reference
parsing, 2011-02-06) and merged in 78c6e0f (Merge branch
'mz/rebase', 2011-04-28).
Correct this by reporting $onto_name istead.
Reported-By: Manuela Hutter <manuelah@opera.com>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is basically the same as using "file://", but is a
little less subtle for the end user. It also allows relative
paths to be specified.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The earlier "--keep-redundant-commit" series broke "cherry-pick"
that is given a commit whose change is already in the current
history. Such a cherry-pick would result in an empty change, and
should stop with an error, telling the user that conflict resolution
may have made the result empty (which is exactly what is happening),
but we silently dropped the change on the floor without any message
nor non-zero exit code.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test is pretty old and did not follow some of our more
modern best practices. In particular:
1. It chdir'd all over the place, leaving later tests to
deal with the fallout. Do our chdirs in subshells
instead.
2. It did not use test_must_fail.
3. It did not use test_line_count.
4. It checked for the non-existence of a ref by looking in the
.git/refs directory (since we pack refs during clone
these days, this will always be succeed, making the
test useless).
Note that one call to "-e .git/refs/..." remains,
because it is checking for the existence of a symbolic
ref, not a ref itself.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Vitor Antunes
* va/git-p4-test:
git-p4: Clean up branch test cases
git-p4: Verify detection of "empty" branch creation
git-p4: Test changelists touching two branches
git usually streams large blobs directly to packs. But there are cases
where git can create large loose blobs (unpack-objects or hash-object
over pipe). Or they can come from other git implementations.
core.bigfilethreshold can also be lowered down and introduce a new
wave of large loose blobs.
Use streaming interface to read/compress/write these blobs in one
go. Fall back to normal way if somehow streaming interface cannot be
used.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct submit description in one test and remove not required commands
from another.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current implementation of new branch parent detection works on the
principle that the new branch is a complete integration, with no
changes, of the original files.
This test shows this deficiency in the particular case when the new
branch is created from a subset of the original files.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible to modify two different branches in P4 in a single
changelist. git-p4 correctly detects this and commits the relevant
changes to the different branches separately. This test proves that and
avoid future regressions in this behavior.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep -e '$pattern'", unlike the case where the patterns are read from
a file, did not treat individual lines in the given pattern argument as
separate regular expressions as it should.
When a submodule repository uses alternate object store mechanism, some
commands that were started from the superproject did not notice it and
failed with "No such object" errors. The subcommands of "git submodule"
command that recursed into the submodule in a separate process were OK;
only the ones that cheated and peeked directly into the submodule's
repository from the primary process were affected.
By Heiko Voigt
* hv/submodule-alt-odb:
teach add_submodule_odb() to look for alternates
The directory path used in "git diff --no-index", when it recurses
down, was broken with a recent update after v1.7.10.1 release.
By Bobby Powers
* bp/diff-no-index-strbuf-fix:
diff --no-index: don't leak buffers in queue_diff
diff --no-index: reset temporary buffer lengths on directory iteration
"git status --porcelain" ignored "--branch" option by mistake. The output
for "git status --branch -z" was also incorrect and did not terminate the
record for the current branch name with NUL as asked.
By Jeff King
* jk/maint-status-porcelain-z-b:
status: respect "-b" for porcelain format
status: fix null termination with "-b"
status: refactor null_termination option
commit: refactor option parsing
When putting whole objects in core is unavoidable, try match object
type and size first before actually inflating.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix regressions to "git diff --no-index" when it recurses down.
By Bobby Powers
* bp/diff-no-index-strbuf-fix:
diff --no-index: don't leak buffers in queue_diff
diff --no-index: reset temporary buffer lengths on directory iteration
When peeking into object stores of submodules, the code forgot that they
might borrow objects from alternate object stores on their own.
By Heiko Voigt
* hv/submodule-alt-odb:
teach add_submodule_odb() to look for alternates
unpack_raw_entry() will not allocate and return decompressed blobs if
they are larger than core.bigFileThreshold. sha1_object() may not be
called on those objects because there's no actual content.
sha1_object() is called later on those objects, where we can safely
use get_data_from_pack() to retrieve blob content for checking.
However we always do that when we definitely need the blob
content. And we often don't.
There are two cases when we may need object content. The first case is
when we find an in-repo blob with the same SHA-1. We need to do
collision test, byte-on-byte. If this test is on, the blob must be
loaded on memory (i.e. no streaming). Normally (e.g. in
fetch/pull/clone) this does not happen because git avoid to send
objects that client already has.
The other case is when --strict is specified and the object in
question is not a blob, which can't happen in reality becase we deal
with large _blobs_ here.
Note: --verify (or git-verify-pack) a pack from current repository
will trigger collision test on every object in the pack, which
effectively disables this patch. This could be easily worked around by
setting GIT_DIR to an imaginary place with no packs.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bash-completion 1.90 shipped with support to load completions
dynamically[1], which means the git completion script wouldn't be loaded
until the user types 'git <tab>'--this creates a problem to people using
__git_ps1(); that function won't be available when the shell is first
created.
For now distributions have workarounded this issue by moving the git
completion to the "compatdir"[2]; this of course is not ideal.
The solution, proposed by Kerrick Staley[3], is to split the git script
in two; the part that deals with __git_ps1() in one (i.e.
git-prompt.sh), and everything else in another (i.e.
git-completion.bash).
Another benefit of this is that zsh user that are not interested in the
bash completion can use it for their prompts, which has been tried
before[4].
The only slight issue is that __gitdir() would be duplicated, but this
is probably not a big deal.
So let's go ahead and move __git_ps1() to a new file.
While at this, I took the liberty to reformat the help text in the new
file.
[1] http://anonscm.debian.org/gitweb/?p=bash-completion/bash-completion.git;a=commitdiff;h=99c4f7f25f50a7cb2fce86055bddfe389effa559
[2] http://projects.archlinux.org/svntogit/packages.git/commit/trunk?h=packages/git&id=974380fabb8f9f412990b17063bf578d98c44a82
[3] http://mid.gmane.org/CANaWP3w9KDu57aHquRRYt8td_haSWTBKs7zUHy-xu0B61gmr9A@mail.gmail.com
[4] http://mid.gmane.org/1303824288-15591-1-git-send-email-mstormo@gmail.com
Cc: Kerrick Staley <mail@kerrickstaley.com>
Cc: Marius Storm-Olsen <mstormo@gmail.com>
Cc: Ville Skyttä <ville.skytta@iki.fi>
Cc: Dan McGee <dan@archlinux.org>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Michael Haggerty (17) and others
via Junio C Hamano (36) and Jeff King (1)
* fc/git-complete-helper: (54 commits)
completion: add new __git_complete helper
Update draft release notes to 1.7.11 (11th batch)
Git 1.7.10.2
document submdule.$name.update=none option for gitmodules
The tenth batch of topics
Update draft release notes to 1.7.10.2
checkout: do not corrupt HEAD on empty repo
apply: remove lego in i18n string in gitdiff_verify_name
dir: convert to strbuf
status: refactor colopts handling
status: respect "-b" for porcelain format
status: fix null termination with "-b"
status: refactor null_termination option
commit: refactor option parsing
Documentation/git-config: describe and clarify "--local <file>" option
reflog-walk: tell explicit --date=default from not having --date at all
clone: fix progress-regression
grep.c: remove redundant line of code
checkout (detached): truncate list of orphaned commits at the new HEAD
t2020-checkout-detach: check for the number of orphaned commits
...
Commit 4b340cf split the logic to parse an ident line out of
pretty.c's format_person_part. But in doing so, it
accidentally introduced an off-by-one error that caused it
to think that single-character names were invalid.
This manifested itself as the "%an" format failing to show
anything at all for a single-character name.
Reported-by: Brian Turner <bturner@atlassian.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Jens Lehmann (1) and Johannes Sixt (1)
* maint:
Consistently use "superproject" instead of "supermodule"
t3404: begin "exchange commits with -p" test with correct preconditions
Currently, patterns that contain newline characters don't match anything
when given to git grep. Regular grep(1) interprets patterns as lists of
newline separated search strings instead.
Implement this functionality by creating and inserting extra grep_pat
structures for patterns consisting of multiple lines when appending to
the pattern lists. For simplicity, all pattern strings are duplicated.
The original pattern is truncated in place to make it contain only the
first line.
Requested-by: Torne (Richard Coles) <torne@google.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We fairly consistently say "superproject" and never "supermodule" these
days. But there are seven occurrences of "supermodule" left in the current
work tree. Three appear in Release Notes for 1.5.3 and 1.7.7, three in
test names and one in a C-code comment.
Replace all occurrences of "supermodule" outside of the Release Notes
(which shouldn't be changed after the fact) with "superproject" for
consistency.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test case shows a bug in 'rebase -p', but even if the bug were fixed
the test would fail because it did not ensure that the preconditions match
the postconditions that were checked. Insert the suitable 'git checkout'.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Would be useful to provide backwards compatibility for _git. Also, zsh
completion uses _git, and it cannot be changed.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prove(1) can write a summary of its test results and timings into a
cache file, t/.prove, then use this information during later runs for
various purposes. But deleting t/.prove after every test run defeats
this purpose. So do not delete t/.prove as part of "make
DEFAILT_TEST_TARGET=prove test". (Continue to delete the file on
"make clean".)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test intends to rebase a branchy history onto a later commit, but it
forgot to reset HEAD back to an earlier commit before it set up the side
branches. In the end, every "rebased" commit was only a fast-forward and
the 'rebase -p' did not change the commit graph at all. Insert the missing
checkout that moves to an earlier commit.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Luke Diamand
* ld/git-p4-tags-and-labels:
git p4: fix bug when enabling tag import/export via config variables
git p4: fix bug when verbose enabled with tag export
git p4: add test for tag import/export enabled via config
Commit 875b91b (diff --no-index: use strbuf for temporary pathnames,
2012-04-25) introduced a regression when using diff --no-index with
directories. When iterating through a directory, the switch to strbuf
from heap-allocated char arrays caused paths to form like 'dir/file1',
'dir/file1file2', rather than 'dir/file1', 'dir/file2' as expected.
Avoid this by resetting the paths variables to their original length
before each iteration.
Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
Reviewed-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we allow to link other object databases when loading a submodules
database we should also load possible alternates.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enables threading in index-pack to resolve base data in parallel.
By Nguyễn Thái Ngọc Duy (3) and Ramsay Jones (1)
* nd/threaded-index-pack:
index-pack: disable threading if NO_PREAD is defined
index-pack: support multithreaded delta resolving
index-pack: restructure pack processing into three main functions
compat/win32/pthread.h: Add an pthread_key_delete() implementation
Gives a better DWIM behaviour for --pretty=format:%gd, "stash list", and
"log -g", depending on how the starting point ("master" vs "master@{0}" vs
"master@{now}") and date formatting options (e.g. "--date=iso") are given
on the command line.
By Jeff King (4) and Junio C Hamano (1)
* jk/maint-reflog-walk-count-vs-time:
reflog-walk: tell explicit --date=default from not having --date at all
reflog-walk: always make HEAD@{0} show indexed selectors
reflog-walk: clean up "flag" field of commit_reflog struct
log: respect date_mode_explicit with --format:%gd
t1411: add more selector index/date tests
Running "git checkout" on an unborn branch used to corrupt HEAD
(regression in 1.7.10); this makes it error out.
By Erik Faye-Lund
* ef/checkout-empty:
checkout: do not corrupt HEAD on empty repo
By Jan Krüger (1) and Junio C Hamano (1)
* jk/maint-tformat-with-z:
log-tree: the previous one is still not quite right
log-tree: use custom line terminator in line termination mode
When checking out another commit from an already detached state, we used
to report all commits that are not reachable from any of the refs as
lossage, but some of them might be reachable from the new HEAD, and there
is no need to warn about them.
By Johannes Sixt
* js/checkout-detach-count:
checkout (detached): truncate list of orphaned commits at the new HEAD
t2020-checkout-detach: check for the number of orphaned commits
This simplifies the completions, and would make it easier to define
aliases in the future.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a test for git p4 to check it can import/export tags
when enabled via a config variable rather than on the command
line.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "git checkout" on an unborn branch used to corrupt HEAD
(regression in 1.7.10); this makes it error out.
By Erik Faye-Lund
* ef/checkout-empty:
checkout: do not corrupt HEAD on empty repo
Gives a better DWIM behaviour for --pretty=format:%gd, "stash list", and
"log -g", depending on how the starting point ("master" vs "master@{0}" vs
"master@{now}") and date formatting options (e.g. "--date=iso") are given
on the command line.
By Jeff King (4) and Junio C Hamano (1)
* jk/maint-reflog-walk-count-vs-time:
reflog-walk: tell explicit --date=default from not having --date at all
reflog-walk: always make HEAD@{0} show indexed selectors
reflog-walk: clean up "flag" field of commit_reflog struct
log: respect date_mode_explicit with --format:%gd
t1411: add more selector index/date tests
The cases "git push" fails due to non-ff can be broken into three
categories; each case is given a separate advise message.
By Christopher Tiwald (2) and Jeff King (1)
* ct/advise-push-default:
Fix httpd tests that broke when non-ff push advice changed
clean up struct ref's nonfastforward field
push: Provide situational hints for non-fast-forward errors
"git repack" used to write out unreachable objects as loose objects
when repacking, even if such loose objects will immediately pruned
due to its age.
By Jeff King
* jk/repack-no-explode-objects-from-old-pack:
gc: use argv-array for sub-commands
argv-array: add a new "pushl" method
argv-array: refactor empty_argv initialization
gc: do not explode objects which will be immediately pruned
Unlike "git rev-parse --show-cdup", "--show-prefix" did not give an
empty line when run at the top of the working tree.
By Ross Lagerwall
* rl/show-empty-prefix:
rev-parse --show-prefix: add in trailing newline
"git status --porcelain" ignored "--branch" option by mistake. The output
for "git status --branch -z" was also incorrect and did not terminate the
record for the current branch name with NUL as asked.
By Jeff King
via Jeff King
* jk/status-porcelain-z-b:
status: refactor colopts handling
status: respect "-b" for porcelain format
status: fix null termination with "-b"
status: refactor null_termination option
commit: refactor option parsing
When checking out another commit from an already detached state, we used
to report all commits that are not reachable from any of the refs as
lossage, but some of them might be reachable from the new HEAD, and there
is no need to warn about them.
By Johannes Sixt
* js/checkout-detach-count:
checkout (detached): truncate list of orphaned commits at the new HEAD
t2020-checkout-detach: check for the number of orphaned commits
Stream large blobs directly out to archive files without slurping
everything in memory first.
By René Scharfe (6) and Nguyễn Thái Ngọc Duy (4)
* nd/stream-to-archive:
t5000: rationalize unzip tests
archive-zip: streaming for deflated files
archive-zip: streaming for stored files
archive-zip: factor out helpers for writing sizes and CRC
archive-zip: remove uncompressed_size
archive-tar: stream large blobs to tar file
archive: delegate blob reading to backend
archive-tar: unindent write_tar_entry by one level
archive-tar: turn write_tar_entry into blob-writing only
streaming: void pointer instead of char pointer
"git push" over smart-http lost progress output a few releases ago.
By Jeff King
* jk/maint-push-progress:
t5541: test more combinations of --progress
teach send-pack about --[no-]progress
send-pack: show progress when isatty(2)
"log --graph" was not very friendly with "--stat" option and its output
had line breaks at wrong places.
By Lucian Poston (5) and Zbigniew Jędrzejewski-Szmek (3)
* lp/diffstat-with-graph:
t4052: work around shells unable to set COLUMNS to 1
test-lib: skip test with COLUMNS=1 under mksh
Prevent graph_width of stat width from falling below min
t4052: Test diff-stat output with minimum columns
t4052: Adjust --graph --stat output for prefixes
Adjust stat width calculations to take --graph output into account
Add output_prefix_length to diff_options
t4052: test --stat output with --graph
The tests cover the discovery of the '.git' directory in the
__gitdir() function in different scenarios, and the prompt itself,
i.e. branch name, detached heads, operations (rebase, merge,
cherry-pick, bisect), and status indicators (dirty, stash, untracked
files; but not the upstream status).
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following patch will add tests for the bash prompt functions as a
new test script, which also has to be run under bash.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In abe1998 ("git checkout -b: allow switching out of an unborn
branch"), a code-path overly-optimisticly assumed that a
branch-name was specified. This is not always the case, and as
a result a NULL-pointer was attempted printed to .git/HEAD.
This could lead to at least two different failure modes:
1) vsnprintf formated the NULL-string as something useful (e.g
"(null)")
2) vsnprintf crashed
Neither were very convenient for formatting a new HEAD-reference.
To fix this, reintroduce some strictness so we only take this
new codepath if a banch-name was specified.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no reason not to, as the user has to explicitly ask
for it, so we are not breaking compatibility by doing so. We
can do this simply by moving the "show_branch" flag into
the wt_status struct. As a bonus, this saves us from passing
it explicitly, simplifying the code.
Signed-off-by: Jeff King <peff@peff.net>
When the "-z" option is given to status, we are supposed to
NUL-terminate each record. However, the "-b" code to show
the tracking branch did not respect this, and always ended
with a newline.
Signed-off-by: Jeff King <peff@peff.net>
This puts delta resolving on each base on a separate thread, one base
cache per thread. Per-thread data is grouped in struct thread_local.
When running with nr_threads == 1, no pthreads calls are made. The
system essentially runs in non-thread mode.
An experiment on a Xeon 24 core machine with git.git shows that
performance does not increase proportional to the number of cores. So
by default, we use maximum 3 cores. Some numbers with --threads from 1
to 16:
1..4
real 0m8.003s 0m5.307s 0m4.321s 0m3.830s
user 0m7.720s 0m8.009s 0m8.133s 0m8.305s
sys 0m0.224s 0m0.372s 0m0.360s 0m0.360s
5..8
real 0m3.727s 0m3.604s 0m3.332s 0m3.369s
user 0m9.361s 0m9.817s 0m9.525s 0m9.769s
sys 0m0.584s 0m0.624s 0m0.540s 0m0.560s
9..12
real 0m3.036s 0m3.139s 0m3.177s 0m2.961s
user 0m8.977s 0m10.205s 0m9.737s 0m10.073s
sys 0m0.596s 0m0.680s 0m0.684s 0m0.680s
13..16
real 0m2.985s 0m2.894s 0m2.975s 0m2.971s
user 0m9.825s 0m10.573s 0m10.833s 0m11.361s
sys 0m0.788s 0m0.732s 0m0.904s 0m1.016s
On an Intel dual core and linux-2.6.git
1..4
real 2m37.789s 2m7.963s 2m0.920s 1m58.213s
user 2m28.415s 2m52.325s 2m50.176s 2m41.187s
sys 0m7.808s 0m11.181s 0m11.224s 0m10.731s
Thanks Ramsay Jones for troubleshooting and support on MinGW platform.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduction of opt->date_mode_explicit was a step in the right direction,
but lost that crucial bit at the very end of the callchain, and the callee
could not tell an explicitly specified "I want *date* but in default format"
from the built-in default value passed when there was no --date specified.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --stat" used to fully count a binary file with modified
execution bits whose contents is unmodified, which was not right.
By Zbigniew Jędrzejewski-Szmek (4) and Johannes Sixt (1)
* zj/diff-empty-chmod:
t4006: Windows do not have /dev/zero
diff --stat: do not run diff on indentical files
diff --stat: report mode-only changes for binary files like text files
tests: check --[short]stat output after chmod
test: modernize style of t4006
Conflicts:
diff.c
"log -z --pretty=tformat:..." does not terminate each record with NUL
and this is a beginning of an attempt to fix it. It still is not right
but the patch does not make externally observable behaviour worse.
By Jan Krüger (1) and Junio C Hamano (1)
* jk/maint-tformat-with-z:
log-tree: the previous one is still not quite right
log-tree: use custom line terminator in line termination mode
Rolls the two-directory-diff logic from diffall script (in contrib/) into
"git difftool" framework.
By Tim Henigan
* th/difftool-diffall:
difftool: print list of valid tools with '--tool-help'
difftool: teach difftool to handle directory diffs
difftool: eliminate setup_environment function
difftool: stop appending '.exe' to git
difftool: remove explicit change of PATH
difftool: exit(0) when usage is printed
difftool: add '--no-gui' option
difftool: parse options using Getopt::Long
When using a Perl script on a system where "perl" found on user's $PATH
could be ancient or otherwise broken, we allow builders to specify the
path to a good copy of Perl with $PERL_PATH. The gitweb test forgot to
use that Perl when running its test.
By Jeff King (1) and Zbigniew Jędrzejewski-Szmek (1)
* jk/maint-gitweb-test-use-sane-perl:
Consistently use perl from /usr/bin/ for scripts
t/gitweb-lib: use $PERL_PATH to run gitweb
"git config --rename-section" to rename an existing section into a bogus
one did not check the new name.
By Jeff King
* jk/maint-config-bogus-section:
config: reject bogus section names for --rename-section
When git checkout switches from a detached HEAD to any other commit, then
all orphaned commits were listed in a warning:
Warning: you are leaving 2 commits behind...:
a5e5396 another fixup
6aa1af6 fixup foo
But if the new commit is actually one from this list (6aa1af6 in this
example), then the list in the warning can be truncated at the new HEAD,
because history beginning at HEAD is not "left behind". This makes it so.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the test that orphans commits to leave 2 commits behind. Add a test
that leaves only one of these behind.
The next patch will truncate the list of orphaned commits earlier. With
this preliminary update, its effect will become more obvious.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are showing reflog selectors during a walk, we infer
from context whether the user wanted to see the index in
each selector, or the reflog date. The current rules are:
1. if the user asked for an explicit date format in the
output, show the date
2. if the user asked for ref@{now}, show the date
3. if neither is true, show the index
However, if we see "ref@{0}", that should be a strong clue
that the user wants to see the counted version. In fact, it
should be much stronger than the date format in (1). The
user may have been setting the date format to use in another
part of the output (e.g., in --format="%gd (%ad)", they may
have wanted to influence the author date).
This patch flips the rules to:
1. if the user asked for ref@{0}, always show the index
2. if the user asked for ref@{now}, always show the date
3. otherwise, we have just "ref"; show them counted by
default, but respect the presence of "--date" as a clue
that the user wanted them date-based
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we show a reflog selector (e.g., via "git log -g"), we
perform some DWIM magic: while we normally show the entry's
index (e.g., HEAD@{1}), if the user has given us a date
with "--date", then we show a date-based select (e.g.,
HEAD@{yesterday}).
However, we don't want to trigger this magic if the
alternate date format we got was from the "log.date"
configuration; that is not sufficiently strong context for
us to invoke this particular magic. To fix this, commit
f4ea32f (improve reflog date/number heuristic, 2009-09-24)
introduced a "date_mode_explicit" flag in rev_info. This
flag is set only when we see a "--date" option on the
command line, and we a vanilla date to the reflog code if
the date was not explicit.
Later, commit 8f8f547 (Introduce new pretty formats %g[sdD]
for reflog information, 2009-10-19) added another way to
show selectors, and it did not respect the date_mode_explicit
flag from f4ea32f.
This patch propagates the date_mode_explicit flag to the
pretty-print code, which can then use it to pass the
appropriate date field to the reflog code. This brings the
behavior of "%gd" in line with the other formats, and means
that its output is independent of any user configuration.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already check that @{now} and "--date" cause the
displayed selector to use the date for both the multiline
and oneline formats. However, we miss several cases:
1. The --format=%gd selector is not tested at all.
2. We do not check how the log.date config interacts with the
"--date" magic (according to f4ea32f, it should not
impact the output).
Doing so reveals that the combination of both (log.date
combined with the %gd format) does not behave as expected.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Octopus merge strategy did not reduce heads that are recorded in the final
commit correctly.
By Junio C Hamano (4) and Michał Kiedrowicz (1)
* jc/merge-reduce-parents-early:
fmt-merge-msg: discard needless merge parents
builtin/merge.c: reduce parents early
builtin/merge.c: collect other parents early
builtin/merge.c: remove "remoteheads" global variable
merge tests: octopus with redundant parents
HTTP transport that requires authentication did not work correctly when
multiple connections are used simultaneously.
By Jeff King (3) and Clemens Buchacher (1)
* cb/http-multi-curl-auth:
http: use newer curl options for setting credentials
http: clean up leak in init_curl_http_auth
fix http auth with multiple curl handles
http auth fails with multiple curl handles
The report from "git fetch" said "new branch" even for a non branch ref.
By Marc Branchaud
* mb/fetch-call-a-non-branch-a-ref:
fetch: describe new refs based on where it came from
fetch: Give remote_ref to update_local_ref() as well
"git push" over smart-http lost progress output and this resurrects it.
By Jeff King
* jk/maint-push-progress:
t5541: test more combinations of --progress
teach send-pack about --[no-]progress
send-pack: show progress when isatty(2)
A couple of commands learn --column option to produce columnar output.
By Nguyễn Thái Ngọc Duy (9) and Zbigniew Jędrzejewski-Szmek (1)
* nd/columns:
tag: add --column
column: support piping stdout to external git-column process
status: add --column
branch: add --column
help: reuse print_columns() for help -a
column: add dense layout support
t9002: work around shells that are unable to set COLUMNS to 1
column: add columnar layout
Stop starting pager recursively
Add column layout skeleton and git-column
Factor out a function for checking the contents of ZIP archives. It
extracts their contents and compares them to the original files. This
removes some duplicate code. Tests that just create archives can lose
their UNZIP prerequisite.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After an entry has been streamed out, its CRC and sizes are written as
part of a data descriptor.
For simplicity, we make the buffer for the compressed chunks twice as
big as for the uncompressed ones, to be sure the result fit in even
if deflate makes them bigger.
t5000 verifies output. t1050 makes sure the command always respects
core.bigfilethreshold
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Write a data descriptor containing the CRC of the entry and its sizes
after streaming it out. For simplicity, do that only if we're storing
files (option -0) for now.
t5000 verifies output. t1050 makes sure the command always respects
core.bigfilethreshold
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5000 verifies output while t1050 makes sure the command always
respects core.bigfilethreshold
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using a Perl script on a system where "perl" found on user's $PATH
could be ancient or otherwise broken, we allow builders to specify the
path to a good copy of Perl with $PERL_PATH. The gitweb test forgot to
use that Perl when running its test.
By Jeff King (1) and Zbigniew Jędrzejewski-Szmek (1)
* jk/maint-gitweb-test-use-sane-perl:
Consistently use perl from /usr/bin/ for scripts
t/gitweb-lib: use $PERL_PATH to run gitweb
Spend only minimum number of columns necessary to show the number of lines
in the output from "diff --stat", instead of always allocating 4 columns
even when showing changes that are much smaller than 1000 lines.
By Zbigniew Jędrzejewski-Szmek
* zj/diff-stat-smaller-num-columns:
diff --stat: use less columns for change counts
Miscellaneous updates to "git p4".
By Pete Wyckoff
* pw/p4-various:
git p4: submit files with wildcards
git p4: fix writable file after rename or copy
git p4: test submit
git p4: bring back files in deleted client directory
"log --graph" was not very friendly with "--stat" option and its output
had line breaks at wrong places.
By Lucian Poston (5) and Zbigniew Jędrzejewski-Szmek (2)
* lp/diffstat-with-graph:
t4052: work around shells unable to set COLUMNS to 1
Prevent graph_width of stat width from falling below min
t4052: Test diff-stat output with minimum columns
t4052: Adjust --graph --stat output for prefixes
Adjust stat width calculations to take --graph output into account
Add output_prefix_length to diff_options
t4052: test --stat output with --graph
A broken shell may not let us set an environment value to an arbitrary
value, interfering with some of the tests. Introduce a test prerequisite
so that we can skip some tests on such a platform.
By Zbigniew Jędrzejewski-Szmek
* zj/mksh-columns-breakage:
test-lib: skip test with COLUMNS=1 under mksh
New users tend to work on one branch at a time and push the result
out. The current and upstream modes of push is a more suitable default
mode than matching mode for these people, but neither is surprise-free
depending on how the project is set up. Introduce a "simple" mode that
is a subset of "upstream" but only works when the branch is named the same
between the remote and local repositories.
The plan is to make it the new default when push.default is not
configured.
By Matthieu Moy (5) and others
* mm/simple-push:
push.default doc: explain simple after upstream
push: document the future default change for push.default (matching -> simple)
t5570: use explicit push refspec
push: introduce new push.default mode "simple"
t5528-push-default.sh: add helper functions
Undocument deprecated alias 'push.default=tracking'
Documentation: explain push.default option a bit more
We only need to have a file with _some_ binary contents; be nice to
our Windows friends and avoid using /dev/zero
Signed-off-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mode-only changes to binary files without content change were reported as
if they were rewritten, but text files in the same situation were reported
as "unchanged". Let's treat binary files like text files here, and simply
say that they are unchanged.
Output of --shortstat is modified in the same way.
Reported-by: Martin Mareš <mj@ucw.cz>
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parser in "fast-import" did not diagnose ":9" style references that is
not followed by required SP/LF as an error.
By Pete Wyckoff
* pw/fast-import-dataref-parsing:
fast-import: tighten parsing of datarefs
When "git fetch" encounters repositories with too many references, the
command line of "fetch-pack" that is run by a helper e.g. remote-curl, may
fail to hold all of them. Now such an internal invocation can feed the
references through the standard input of "fetch-pack".
By Ivan Todoroski
* it/fetch-pack-many-refs:
remote-curl: main test case for the OS command line overflow
fetch-pack: test cases for the new --stdin option
remote-curl: send the refs to fetch-pack on stdin
fetch-pack: new --stdin option to read refs from stdin
Conflicts:
t/t5500-fetch-pack.sh
"log -p --graph" used with "--stat" had a few formatting error.
By Lucian Poston
* lp/maint-diff-three-dash-with-graph:
t4202: add test for "log --graph --stat -p" separator lines
log --graph: fix break in graph lines
log --graph --stat: three-dash separator should come after graph lines
Giving "--continue" to a conflicted "rebase -i" session skipped a
commit that only results in changes to submodules.
By John Keeping
* jk/rebase-i-submodule-conflict-only:
rebase -i continue: don't skip commits that only change submodules
The current code runs "perl gitweb.cgi" to test gitweb. This
will use whatever version of perl happens to be first in the
PATH. We are better off using the specific perl that the
user specified via PERL_PATH, which matches what gets put on
the #!-line of the built gitweb.cgi.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test to check 'diff --stat' output with a text file after chmod,
and the same for a binary file. This demonstrates that text and binary
files are treated differently, which can be misleading.
While at it, add tests to check --shortstat output, too.
Reported-by: Martin Mareš <mj@ucw.cz>
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The correct output would have NUL after each commit, so "-z --format=%s"
would have a single-liner subject with the line-terminating LF replaced
with NUL, and "-p/--stat -z --format=%s" would have a single-liner subject
with its line-terminating LF, followed by the diff/diffstat in which the
terminating LF of the last line is replaced with NUL, but to be consistent
with what "-p/--stat -z --pretty=format:%s" does, I think it is OK to
append NUL to the diff/diffstat part instead of replacing its last LF with
NUL.
The added test shows the update is still not right for "-p -z --format".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using a custom format in line termination mode (as opposed to line
separation mode), the configured line terminator is not used, so things
like "git log --pretty=tformat:%H -z" do not work properly.
Make it use the line terminator the user ordered.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we tested only that "push --quiet --no-progress"
was silent. However, there are many other combinations that
were not tested:
1. no options at all (but stderr as a tty)
2. --no-progress by itself
3. --quiet by itself
4. --progress (when stderr not a tty)
These are tested elsewhere for general "push", but it is
important to test them separately for http. It follows a
very different code path than git://, and options must be
relayed across a remote helper to a separate send-pack
process (and in fact cases (1), (2), and (4) have all been
broken just for http at some point in the past).
We can drop the "--quiet --no-progress" test, as it is not
really interesting (it is already handled by testing them
separately in (2) and (3) above).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are four wildcard characters in p4. Files with these
characters can be added to p4 repos using the "-f" option. They
are stored in %xx notation, and when checked out, p4 converts
them back to normal.
When adding files with wildcards in git, the submit path must
be careful to use the encoded names in some places, and it
must use "-f" to add them. All other p4 commands that operate
on the client directory expect encoded filenames as arguments.
Support for wildcards in the clone/sync path was added in
084f630 (git-p4: decode p4 wildcard characters, 2011-02-19),
but that change did not handle the submit path.
There was a problem with wildcards in the sync path too. Commit
084f630 (git-p4: decode p4 wildcard characters, 2011-02-19)
handled files with p4 wildcards that were added or modified in
p4. Do this for deleted files, and also in branch detection
checks, too.
Reported-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way rename works is with a "p4 integrate", optionally
followed by a "p4 edit" if the change is not a 100% rename.
Contents are generated by applying a patch, not doing a file
system rename. Copy is similar.
In this case, p4 does not fix the permissions back to read-only.
Make sure this happens by calling "p4 sync -f".
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Try each of the five diff patterns that might happen during submit.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to auto-create the client directory, added in 0591cfa
(git-p4: ensure submit clientPath exists before chdir,
2011-12-09), works when the client directory never existed.
But if the directory is summarily removed without telling p4,
the sync operation will not bring back all the files. Always
do "sync -f" if the client directory is newly created.
Reported-by: Gary Gibbons <ggibbons@perforce.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Luke Diamand
* ld/git-p4-tags-and-labels:
git p4: fix unit tests
git p4: move verbose to base class
git p4: Ignore P4EDITOR if it is empty
git p4: Squash P4EDITOR in test harness
git p4: fix-up "import/export of labels to/from p4"
git p4: import/export of labels to/from p4
git p4: Fixing script editor checks
"git rebase" learned to optionally keep commits that do not introduce
any change in the original history.
By Neil Horman
* nh/empty-rebase:
git-rebase: add keep_empty flag
git-cherry-pick: Add test to validate new options
git-cherry-pick: Add keep-redundant-commits option
git-cherry-pick: add allow-empty option
"git config --rename-section" to rename an existing section into a
bogus one did not check the new name.
By Jeff King
* jk/maint-config-bogus-section:
config: reject bogus section names for --rename-section
Number of columns required for change counts is now computed based on
the maximum number of changed lines instead of being fixed. This means
that usually a few more columns will be available for the filenames
and the graph.
The graph width logic is also modified to include enough space for
"Bin XXX -> YYY bytes".
If changes to binary files are mixed with changes to text files,
change counts are padded to take at least three columns. And the other
way around, if change counts require more than three columns, then
"Bin"s are padded to align with the change count. This way, the +-
part starts in the same column as "XXX -> YYY" part for binary files.
This makes the graph easier to parse visually thanks to the empty
column. This mimics the layout of diff --stat before this change.
Tests and the tutorial are updated to reflect the new --stat output.
This means either the removal of extra padding and/or the addition of
up to three extra characters to truncated filenames. One test is added
to check the graph alignment when a binary file change and text file
change of more than 999 lines are committed together.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell construct to launch git-daemon and wait for it to start
serving during the test was faulty, and this fixes it.
By Johannes Sixt
* js/daemon-test-race-fix:
t5570: fix forwarding of git-daemon messages via cat
The new "include.path" directive in the configuration files learned
to understand "~/path" and "~user/path".
By Jeff King
* mm/include-userpath:
config: expand tildes in include.path variable
Longstanding bug in a test scaffolding that occasionally made t5800
hang was fixed.
By Pete Wyckoff
* pw/t5800-import-race-fix:
git-remote-testgit: fix race when spawning fast-import
Avoid writing out unreachable objects as loose objects when repacking,
if such loose objects will immediately pruned due to its age anyway.
By Jeff King
* jk/repack-no-explode-objects-from-old-pack:
gc: use argv-array for sub-commands
argv-array: add a new "pushl" method
argv-array: refactor empty_argv initialization
gc: do not explode objects which will be immediately pruned
You can already use relative paths in include.path, which
means that including "foo" from your global "~/.gitconfig"
will look in your home directory. However, you might want to
do something clever like putting "~/.gitconfig-foo" in a
specific repository's config file.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Octopus merge strategy did not reduce heads that are recorded in the
final commit correctly.
By Junio C Hamano (4) and Michał Kiedrowicz (1)
* jc/merge-reduce-parents-early:
fmt-merge-msg: discard needless merge parents
builtin/merge.c: reduce parents early
builtin/merge.c: collect other parents early
builtin/merge.c: remove "remoteheads" global variable
merge tests: octopus with redundant parents
Fixes http authentication breakage when we keep multiple HTTP requests in
flight using curl-multi.
By Jeff King (3) and Clemens Buchacher (1)
* cb/http-multi-curl-auth:
http: use newer curl options for setting credentials
http: clean up leak in init_curl_http_auth
fix http auth with multiple curl handles
http auth fails with multiple curl handles
Normally all cells (and in turn columns) share the same width. This
layout mode can waste space because one long item can stretch our all
columns.
With COL_DENSE enabled, column width is calculated indepdendently. All
columns are shrunk to minimum, then it attempts to push cells of the
last row over to the next column with hope that everything still fits
even there's one row less. The process is repeated until the new layout
cannot fit in given width any more, or there's only one row left
(perfect!).
Apparently, this mode consumes more cpu than the old one, but it makes
better use of terminal space. For layouting one or two screens, cpu
usage should not be detectable.
This patch introduces option handling code besides layout modes and
enable/disable to expose this feature as "dense". The feature can be
turned off by specifying "nodense".
Thanks-to: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In t9002-column.sh, file with expected output was shared between two
test cases, but set in the first one. Since the first test case can
now be skipped, setting up the expected output is moved outside of the
test case.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
COL_COLUMN and COL_ROW fill column by column (or row by row
respectively), given the terminal width and how many space between
columns. All cells have equal width.
Strings are supposed to be in UTF-8. Valid ANSI escape strings are OK.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mksh does not allow $COLUMNS to be set below 12. mksh(1) says that
$COLUMNS is "always set, defaults to 80, unless the value as reported
by stty(1) is non-zero and sane enough". This applies also to setting
it directly for one command:
$ COLUMNS=10 python -c 'import os; print os.environ["COLUMNS"]'
98
Add a test prerequisite by checking if we can set COLUMNS=1, to allow
us to skip tests that needs it.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A column option string consists of many token separated by either
a space or a comma. A token belongs to one of three groups:
- enabling: always, never and auto
- layout mode: currently plain (which does not layout at all)
- other future tuning flags
git-column can be used to pipe output to from a command that wants
column layout, but not to mess with its own output code. Simpler output
code can be changed to use column layout code directly.
Thanks-to: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell function that starts git-daemon wants to read the first line of
the daemon's stderr to ensure that it started correctly. Subsequent daemon
errors should be redirected to fd 4 (which is the terminal in verbose mode
or /dev/null in quiet mode). To that end the shell script used 'read' to
get the first line of output, and then 'cat &' to forward everything else
in a background process.
The problem is, that 'cat >&4 &' does not produce any output because the
shell redirects a background process's stdin to /dev/null. To have this
command invocation do anything useful, we have to redirect its stdin
explicitly (which overrides the /dev/null redirection).
The shell function connects the daemon's stderr to its consumers via a
FIFO. We cannot just do this:
read line <git_daemon_output
cat <git_daemon_output >&4 &
because after the first redirection the pipe is closed and the daemon
could receive SIGPIPE if it writes at the wrong moment. Therefore, we open
the readable end of the FIFO only once on fd 7 in the shell and dup from
there to the stdin of the two consumers.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The report from "git fetch" said "new branch" even for a non branch
ref.
By Marc Branchaud
* mb/fetch-call-a-non-branch-a-ref:
fetch: describe new refs based on where it came from
fetch: Give remote_ref to update_local_ref() as well
When PATH contains an unreadable directory, alias expansion code did
not kick in, and failed with an error that said "git-subcmd" was not
found.
By Jeff King (1) and Ramsay Jones (1)
* jk/run-command-eacces:
run-command: treat inaccessible directories as ENOENT
compat/mingw.[ch]: Change return type of exec functions to int
