Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to convert the SHA-1 to hexadecimal before printing it.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They were never used.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite to take an object_id argument and convert the local variable
"peeled" object_id.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change typedef each_ref_fn to take a "const struct object_id *oid"
parameter instead of "const unsigned char *sha1".
To aid this transition, implement an adapter that can be used to wrap
old-style functions matching the old typedef, which is now called
"each_ref_sha1_fn"), and make such functions callable via the new
interface. This requires the old function and its cb_data to be
wrapped in a "struct each_ref_fn_sha1_adapter", and that object to be
used as the cb_data for an adapter function, each_ref_fn_adapter().
This is an enormous diff, but most of it consists of simple,
mechanical changes to the sites that call any of the "for_each_ref"
family of functions. Subsequent to this change, the call sites can be
rewritten one by one to use the new interface.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git 2.4 broke setting verbosity and progress levels on "git clone"
with native transports.
* mh/clone-verbosity-fix:
clone: call transport_set_verbosity before anything else on the newly created transport
Error messages from "git branch" called remote-tracking branches as
"remote branches".
* dl/branch-error-message:
branch: do not call a "remote-tracking branch" a "remote branch"
Just as we have "%(upstream)" to report the "@{upstream}"
for each ref, this patch adds "%(push)" to match "@{push}".
It supports the same tracking format modifiers as upstream
(because you may want to know, for example, which branches
have commits to push).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This saves us having to maintain a magic number to skip past
the matched prefix.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After calling stat_tracking_info, callers often want to
print the name of the upstream branch (in addition to the
tracking count). To do this, they have to access
branch->merge->dst[0] themselves. This is not wrong, as the
return value from stat_tracking_info tells us whether we
have an upstream branch or not. But it is a bit leaky, as we
make an assumption about how it calculated the upstream
name.
Instead, let's add an out-parameter that lets the caller
know the upstream name we found.
As a bonus, we can get rid of the unusual tri-state return
from the function. We no longer need to use it to
differentiate between "no tracking config" and "tracking ref
does not exist" (since you can check the upstream_name for
that), so we can just use the usual 0/-1 convention for
success/error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the previous commit introduced the branch_get_upstream
helper, there was one call-site that could not be converted:
the one in sha1_name.c, which gives detailed error messages
for each possible failure.
Let's teach the helper to optionally report these specific
errors. This lets us convert another callsite, and means we
can use the helper in other locations that want to give the
same error messages.
The logic and error messages come straight from sha1_name.c,
with the exception that we start each error with a lowercase
letter, as is our usual style (note that a few tests need
updated as a result).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the information needed to find the @{upstream} of a
branch is included in the branch struct, but callers have to
navigate a series of possible-NULL values to get there.
Let's wrap that logic up in an easy-to-read helper.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we create each branch struct, we fill in the
"remote_name" field from the config, and then fill in the
actual "remote" field (with a "struct remote") based on that
name. However, it turns out that nobody really cares about
the latter field. The only two sites that access it at all
are:
1. git-merge, which uses it to notice when the branch does
not have a remote defined. But we can easily replace this
with looking at remote_name instead.
2. remote.c itself, when setting up the @{upstream} merge
config. But we don't need to save the "remote" in the
"struct branch" for that; we can just look it up for
the duration of the operation.
So there is no need to have both fields; they are redundant
with each other (the struct remote contains the name, or you
can look up the struct from the name). It would be nice to
simplify this, especially as we are going to add matching
pushremote config in a future patch (and it would be nice to
keep them consistent).
So which one do we keep and which one do we get rid of?
If we had a lot of callers accessing the struct, it would be
more efficient to keep it (since you have to do a lookup to
go from the name to the struct, but not vice versa). But we
don't have a lot of callers; we have exactly one, so
efficiency doesn't matter. We can decide this based on
simplicity and readability.
And the meaning of the struct value is somewhat unclear. Is
it always the remote matching remote_name? If remote_name is
NULL (i.e., no per-branch config), does the struct fall back
to the "origin" remote, or is it also NULL? These questions
will get even more tricky with pushremotes, whose fallback
behavior is more complicated. So let's just store the name,
which pretty clearly represents the branch.*.remote config.
Any lookup or fallback behavior can then be implemented in
helper functions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call file_exists() instead of open-coding it. That's shorter, simpler
and the intent becomes clearer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This wires the in-repo-symlink following code through to the cat-file
builtin. In the event of an out-of-repo link, cat-file will print
the link in a new format.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the "--allow-unknown-type" option to "cat-file" to allow
inspecting loose objects of an experimental or a broken type.
* kn/cat-file-literally:
t1006: add tests for git cat-file --allow-unknown-type
cat-file: teach cat-file a '--allow-unknown-type' option
cat-file: make the options mutually exclusive
sha1_file: support reading from a loose object of unknown type
"git merge FETCH_HEAD" learned that the previous "git fetch" could
be to create an Octopus merge, i.e. recording multiple branches
that are not marked as "not-for-merge"; this allows us to lose an
old style invocation "git merge <msg> HEAD $commits..." in the
implementation of "git pull" script; the old style syntax can now
be deprecated.
* jc/merge:
merge: deprecate 'git merge <message> HEAD <commit>' syntax
merge: handle FETCH_HEAD internally
merge: decide if we auto-generate the message early in collect_parents()
merge: make collect_parents() auto-generate the merge message
merge: extract prepare_merge_message() logic out
merge: narrow scope of merge_names
merge: split reduce_parents() out of collect_parents()
merge: clarify collect_parents() logic
merge: small leakfix and code simplification
merge: do not check argc to determine number of remote heads
merge: clarify "pulling into void" special case
t5520: test pulling an octopus into an unborn branch
t5520: style fixes
merge: simplify code flow
merge: test the top-level merge driver
After "git add -N", the path appeared in output of "git diff HEAD"
and "git diff --cached HEAD", leading "git status" to classify it
as "Changes to be committed". Such a path, however, is not yet to
be scheduled to be committed. "git diff" showed the change to the
path as modification, not as a "new file", in the header of its
output.
Treat such paths as "yet to be added to the index but Git already
know about them"; "git diff HEAD" and "git diff --cached HEAD"
should not talk about them, and "git diff" should show them as new
files yet to be added to the index.
* nd/diff-i-t-a:
diff-lib.c: adjust position of i-t-a entries in diff
Commit 2879bc3 made the progress and verbosity options sent to remote helper
earlier than they previously were. But nothing else after that would send
updates if the value is changed later on with transport_set_verbosity.
While for fetch and push, transport_set_verbosity is the first thing that
is done after creating the transport, it was not the case for clone. So
commit 2879bc3 broke changing progress and verbosity for clone, for urls
requiring a remote helper only (so, not git:// urls, for instance).
Moving transport_set_verbosity to just after the transport is created
works around the issue.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though "git clean" takes pathspec to limit the part of the
working tree to be cleaned, it checked the paths it encounters
during its directory traversal with lstat(2), before checking if
the path is within the pathspec.
Ignore paths outside pathspec and proceed without checking with
lstat(2). Even if such a path is unreadable due to e.g. EPERM,
"git clean" should not care.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We avoid setting core.worktree when the repository location is the
".git" directory directly at the top level of the working tree, but
the code misdetected the case in which the working tree is at the
root level of the filesystem (which arguably is a silly thing to
do, but still valid).
* jk/init-core-worktree-at-root:
init: don't set core.worktree when initializing /.git
When running "add -e", if launching the editor fails, we do
not notice and continue as if the output is what the user
asked for. The likely case is that the editor did not touch
the contents at all, and we end up adding everything.
Reported-by: Russ Cox <rsc@golang.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default $HOME/.gitconfig file created upon "git config --global"
that edits it had incorrectly spelled user.name and user.email
entries in it.
* oh/fix-config-default-user-name-section:
config: fix settings in default_user_config template
Code clean-up for xdg configuration path support.
* pt/xdg-config-path:
path.c: remove home_config_paths()
git-config: replace use of home_config_paths()
git-commit: replace use of home_config_paths()
credential-store.c: replace home_config_paths() with xdg_config_home()
dir.c: replace home_config_paths() with xdg_config_home()
attr.c: replace home_config_paths() with xdg_config_home()
path.c: implement xdg_config_home()
"hash-object --literally" introduced in v2.2 was not prepared to
take a really long object type name.
* jc/hash-object:
write_sha1_file(): do not use a separate sha1[] array
t1007: add hash-object --literally tests
hash-object --literally: fix buffer overrun with extra-long object type
git-hash-object.txt: document --literally option
Some error messages in "git config" were emitted without calling
the usual error() facility.
* jn/clean-use-error-not-fprintf-on-stderr:
config: use error() instead of fprintf(stderr, ...)
Some time ago, "git blame" (incorrectly) lost the convert_to_git()
call when synthesizing a fake "tip" commit that represents the
state in the working tree, which broke folks who record the history
with LF line ending to make their project portabile across
platforms while terminating lines in their working tree files with
CRLF for their platform.
* tb/blame-resurrect-convert-to-git:
blame: CRLF in the working tree and LF in the repo
Memory usage of "git index-pack" has been trimmed by tens of
per-cent.
* nd/slim-index-pack-memory-usage:
index-pack: kill union delta_base to save memory
index-pack: reduce object_entry size to save memory
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
The `verify` and `create` subcommands of the bundle builtin do
not properly verify the command line arguments that have been
passed in. While the `verify` subcommand accepts an arbitrary
amount of ignored arguments the `create` subcommand does not
complain about being passed too few arguments, resulting in a
bogus call to `git rev-list`. Fix these errors by verifying that
the correct amount of arguments has been passed in.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git cat-file' throws an error while trying to print the type or
size of a broken/corrupt object. This is because these objects are
usually of unknown types.
Teach git cat-file a '--allow-unknown-type' option where it prints
the type or size of a broken/corrupt object without throwing
an error.
Modify '-t' and '-s' options to call sha1_object_info_extended()
directly to support the '--allow-unknown-type' option.
Add documentation for 'cat-file --allow-unknown-type'.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
cat-file: add documentation for '--allow-unknown-type' option.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only parse the options if 2 or 3 arguments are specified.
Update 'struct option options[]' to use OPT_CMDMODE rather than
OPT_SET_INT to allow only one mutually exclusive option and avoid the
need for checking number of arguments. This was written by Junio C Hamano,
tested by me.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -r -d" mentions "delete remote branch", which should be
"remote-tracking branch".
Signed-off-by: Danny Lin <danny0838@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since home_config_paths() combines distinct functionality already
implemented by expand_user_path() and xdg_config_home(), and hides the
home config file path ~/.gitconfig. Make the code more explicit by
replacing the use of home_config_paths() with expand_user_path() and
xdg_config_home().
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since home_config_paths() combines two distinct functionality already
implemented by expand_user_path() and xdg_config_home(), and hides the
home config file path ~/.gitconfig. Make the code more explicit by
replacing the use of home_config_paths() with expand_user_path() and
xdg_config_home().
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default $HOME/.gitconfig file created upon "git config --global"
that edits it had incorrectly spelled user.name and user.email
entries in it.
* oh/fix-config-default-user-name-section:
config: fix settings in default_user_config template
We avoid setting core.worktree when the repository location is the
".git" directory directly at the top level of the working tree, but
the code misdetected the case in which the working tree is at the
root level of the filesystem (which arguably is a silly thing to
do, but still valid).
* jk/init-core-worktree-at-root:
init: don't set core.worktree when initializing /.git
"git show-branch --topics HEAD" (with no other arguments) did not
do anything interesting. Instead, contrast the given revision
against all the local branches by default.
* mh/show-branch-topic:
show-branch: show all local heads when only giving one rev along --topics
Identify parts of the code that knows that we use SHA-1 hash to
name our objects too much, and use (1) symbolic constants instead
of hardcoded 20 as byte count and/or (2) use struct object_id
instead of unsigned char [20] for object names.
* bc/object-id:
apply: convert threeway_stage to object_id
patch-id: convert to use struct object_id
commit: convert parts to struct object_id
diff: convert struct combine_diff_path to object_id
bulk-checkin.c: convert to use struct object_id
zip: use GIT_SHA1_HEXSZ for trailers
archive.c: convert to use struct object_id
bisect.c: convert leaf functions to use struct object_id
define utility functions for object IDs
define a structure for object IDs
As of d089ebaa (setup: sanitize absolute and funny paths in
get_pathspec(), 2008-01-28), prefix_path() always returns a
newly allocated string, so callers should free its result.
Additionally, drop the const from variables to which the result of
the prefix_path() is assigned, so they can be free()'d without
having to cast-away the constness.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"hash-object" learned in 5ba9a93 (hash-object: add --literally
option, 2014-09-11) to allow crafting a corrupt/broken object of
unknown type.
When the user-provided type is particularly long, however, it can
overflow the relatively small stack-based character array handed to
write_sha1_file_prepare() by hash_sha1_file() and write_sha1_file(),
leading to stack corruption (and crash). Introduce a custom helper
to allow arbitrarily long typenames just for "hash-object --literally".
[jc: Eric's original used a strbuf in the more common codepaths, and
I rewrote it to avoid penalizing the non-literally code. Bugs are mine]
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The die() / error() / warning() helpers put a fatal: / error: /
warning: prefix in front of the error message they print describing
the message's severity, which users are likely to be accustomed to
seeing these days.
This change will also be useful when marking the message for
translation: the argument to error() includes no newline at the end,
so it is less fussy for translators to translate without lines running
together in the translated output.
While we're here, start the error messages with a lowercase letter to
match the usual typography of error messages.
A quick web search and a code search at codesearch.debian.net finds no
scripts trying to parse these error messages, so this change should be
safe.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, 9c9b4f2f (standardize usage info string format, 2015-01-13)
tried to make usage-string in line with the documentation by
- Placing angle brackets around fill-in-the-blank parameters
- Putting dashes in multiword parameter names
- Adding spaces to [-f|--foobar] to make [-f | --foobar]
- Replacing <foobar>* with [<foobar>...]
but it missed a few places.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A typical setup under Windows is to set core.eol to CRLF, and text
files are marked as "text" in .gitattributes, or core.autocrlf is
set to true.
After 4d4813a5 "git blame" no longer works as expected for such a
set-up. Every line is annotated as "Not Committed Yet", even though
the working directory is clean. This is because the commit removed
the conversion in blame.c for all files, with or without CRLF in the
repo.
Having files with CRLF in the repo and core.autocrlf=input is a
temporary situation, and the files, if committed as is, will be
normalized in the repo, which _will_ be a notable change. Blaming
them with "Not Committed Yet" is the right result. Revert commit
4d4813a5 which was a misguided attempt to "solve" a non-problem.
Add two test cases in t8003 to verify the correct CRLF conversion.
Suggested-By: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We had this in "git merge" manual for eternity:
'git merge' <msg> HEAD <commit>...
[This] syntax (<msg> `HEAD` <commit>...) is supported for
historical reasons. Do not use it from the command line or in
new scripts. It is the same as `git merge -m <msg> <commit>...`.
With the update to "git merge" to make it understand what is
recorded in FETCH_HEAD directly, including Octopus merge cases, we
now can rewrite the use of this syntax in "git pull" with a simple
"git merge FETCH_HEAD".
Also there are quite a few fallouts in the test scripts, and it
turns out that "git cvsimport" also uses this old syntax to record
a merge.
Judging from this result, I would not be surprised if dropping the
support of the old syntax broke scripts people have written and been
relying on for the past ten years. But at least we can start the
deprecation process by throwing a warning message when the syntax is
used.
With luck, we might be able to drop the support in a few years.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The collect_parents() function now is responsible for
1. parsing the commits given on the command line into a list of
commits to be merged;
2. filtering these parents into independent ones; and
3. optionally calling fmt_merge_msg() via prepare_merge_message()
to prepare an auto-generated merge log message, using fake
contents that FETCH_HEAD would have had if these commits were
fetched from the current repository with "git pull . $args..."
Make "git merge FETCH_HEAD" to be the same as the traditional
git merge "$(git fmt-merge-msg <.git/FETCH_HEAD)" $commits
invocation of the command in "git pull", where $commits are the ones
that appear in FETCH_HEAD that are not marked as not-for-merge, by
making it do a bit more, specifically:
- noticing "FETCH_HEAD" is the only "commit" on the command line
and picking the commits that are not marked as not-for-merge as
the list of commits to be merged (substitute for step #1 above);
- letting the resulting list fed to step #2 above;
- doing the step #3 above, using the contents of the FETCH_HEAD
instead of fake contents crafted from the list of commits parsed
in the step #1 above.
Note that this changes the semantics. "git merge FETCH_HEAD" has
always behaved as if the first commit in the FETCH_HEAD file were
directly specified on the command line, creating a two-way merge
whose auto-generated merge log said "merge commit xyz". With this
change, if the previous fetch was to grab multiple branches (e.g.
"git fetch $there topic-a topic-b"), the new world order is to
create an octopus, behaving as if "git pull $there topic-a topic-b"
were run. This is a deliberate change to make that happen, and
can be seen in the changes to t3033 tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to pass the list of parents to fmt_merge_msg(), cmd_merge()
uses this strbuf to create something that look like FETCH_HEAD that
describes commits that are being merged. This is necessary only
when we are creating the merge commit message ourselves, but was
done unconditionally.
Move the variable and the logic to populate it to confine them in a
block that needs them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The latter does two separate things:
- Parse the list of commits on the command line, and formulate the
list of commits to be merged (including the current HEAD);
- Compute the list of parents to be recorded in the resulting merge
commit.
Split the latter into a separate helper function, so that we can
later supply the list commits to be merged from a different source
(namely, FETCH_HEAD).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify this small function in three ways.
- The function initially collects all commits to be merged into a
commit_list "remoteheads"; the "remotes" pointer always points at
the tail of this list (either the remoteheads variable itself, or
the ->next slot of the element at the end of the list) to help
elongate the list by repeated calls to commit_list_insert().
Because the new element appended by commit_list_insert() will
always have its ->next slot NULLed out, there is no need for us
to assign NULL to *remotes to terminate the list at the end.
- The variable "head_subsumed" always confused me every time I read
this code. What is happening here is that we inspect what the
caller told us to merge (including the current HEAD) and come up
with the list of parents to be recorded for the resulting merge
commit, omitting commits that are ancestor of other commits.
This filtering may remove the current HEAD from the resulting
parent list---and we signal that fact with this variable, so that
we can later record it as the first parent when "--no-ff" is in
effect.
- The "parents" list is created for this function by reduce_heads()
and was not deallocated after its use, even though the loop
control was written in such a way to allow us to do so by taking
the "next" element in a separate variable so that it can be used
in the next-step part of the loop control.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing a merged object name like "foo~20" to formulate a merge
summary "Merge branch foo (early part)", a temporary strbuf is used,
but we forgot to deallocate it when we failed to find the named
branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To reject merging multiple commits into an unborn branch, we check
argc, thinking that collect_parents() that reads the remaining
command line arguments from <argc, argv> will give us the same
number of commits as its input, i.e. argc.
Because what we really care about is the number of commits, let the
function run and then make sure it returns only one commit instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of having it as one of the three if/elseif/.. case arms,
test the condition and handle this special case upfront. This makes
it easier to follow the flow of logic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the first things cmd_merge() does is to see if the "--abort"
option is given and run "reset --merge" and exit. When the control
reaches this point, we know "--abort" was not given.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A broken or badly formatted commit might not record author or
committer lines or we may not find a valid name on them. The
function record_person() returned after calling get_commit_buffer()
without calling unuse_commit_buffer() on the memory it obtained in
such cases, potentially leaking it.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once we know the number of objects in the input pack, we allocate an
array of nr_objects of struct delta_entry. On x86-64, this struct is
32 bytes long. The union delta_base, which is part of struct
delta_entry, provides enough space to store either ofs-delta (8 bytes)
or ref-delta (20 bytes).
Because ofs-delta encoding is more efficient space-wise and more
performant at runtime than ref-delta encoding, Git packers try to use
ofs-delta whenever possible, and it is expected that objects encoded
as ref-delta are minority.
In the best clone case where no ref-delta object is present, we waste
(20-8) * nr_objects bytes because of this union. That's about 38MB out
of 100MB for deltas[] with 3.4M objects, or 38%. deltas[] would be
around 62MB without the waste.
This patch attempts to eliminate that. deltas[] array is split into
two: one for ofs-delta and one for ref-delta. Many functions are also
duplicated because of this split. With this patch, ofs_deltas[] array
takes 51MB. ref_deltas[] should remain unallocated in clone case (0
bytes). This array grows as we see ref-delta. We save about half in
this case, or 25% of total bookkeeping.
The saving is more than the calculation above because some padding in
the old delta_entry struct is removed. ofs_delta_entry is 16 bytes,
including the 4 bytes padding. That's 13MB for padding, but packing
the struct could break platforms that do not support unaligned
access. If someone on 32-bit is really low on memory and only deals
with packs smaller than 2G, using 32-bit off_t would eliminate the
padding and save 27MB on top.
A note about ofs_deltas allocation. We could use ref_deltas memory
allocation strategy for ofs_deltas. But that probably just adds more
overhead on top. ofs-deltas are generally the majority (1/2 to 2/3) in
any pack. Incremental realloc may lead to too many memcpy. And if we
preallocate, say 1/2 or 2/3 of nr_objects initially, the growth rate
of ALLOC_GROW() could make this array larger than nr_objects, wasting
more memory.
Brought-up-by: Matthew Sporleder <msporleder@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name (not user) and email setting should be in config section
"user" and not in "core" as documented in Documentation/config.txt.
Signed-off-by: Ossi Herrala <oherrala@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 2bf15a3330, whose
intention was good, but the verbosity levels used in merge-recursive
turns out to be rather uneven. For example, a merge of two branches
with conflicting submodule updates used to report CONFLICT: output
with --quiet but no longer (which *is* desired), while the final
"Automatic merge failed; fix conflicts and then commit" message is
still shown even with --quiet (which *is* inconsistent).
Originally reported by Bryan Turner; it is too early to declare what
the concensus is, but it seems that we would need to level the
verbosity levels used in merge strategy backends before we can go
forward. In the meantime, we'd revert to the old behaviour until
that happens.
cf. $gmane/267245
"git merge --quiet" did not squelch messages from the underlying
merge-recursive strategy.
* jk/merge-quiet:
merge: pass verbosity flag down to merge-recursive
A push into an unborn branch, with "receive.denyCurrentBranch" set
to "updateInstead", did not check out the working tree as expected.
* jc/update-instead-into-void:
push-to-deploy: allow pushing into an unborn branch and updating it
The "help-all" option is being initialized with a wrong value.
While being semantically wrong this can also cause a segmentation
fault in gcc on ARMv7 hardfloat platforms with a hardened
toolchain. Fix this by initializing with a NULL value.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When detached and checking out a branch again, git checkout warns
about commit(s) that might get lost. It says "If you want to keep
them ..." even for only one commit.
Use Q_() to allow differentiating singular vs plural.
Signed-off-by: Thomas Schneider <thosch97@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes "git merge --quiet" really quiet when we call
into merge-recursive.
Note that we can't just pass our flag down as-is; the two
parts of the code use different scales. We center at "0" as
normal for git-merge (with "--quiet" giving a negative
value), but merge-recursive uses "2" as its center. This
patch passes a negative value to merge-recursive rather than
"1", though, as otherwise the user would have to use "-qqq"
to squelch all messages (but the downside is that the user
cannot distinguish between levels 0-2 if without resorting
to the GIT_MERGE_VERBOSITY variable).
We may want to review and renormalize the message severities
in merge-recursive, but that does not have to happen now.
This is at least in improvement in the sense that we are
respecting "--quiet" at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you create a git repository in the root directory with
"git init /", we erroneously write a core.worktree entry.
This isn't _wrong_, in the sense that it's OK to set
core.worktree when we don't need to. But it is unnecessarily
surprising if you later move the .git directory to another
path (which usually moves the relative working tree, but is
foiled if there is an explicit worktree set).
The problem is that we check whether core.worktree is
necessary by seeing if we can make the git_dir by
concatenating "/.git" onto the working tree. That would lead
to "//.git" in this instance, but we actually have "/.git"
(without the doubled slash).
We can fix this by special-casing the root directory. I also
split the logic out into its own function to make the
conditional a bit more readable (and used skip_prefix, which
I think makes it a little more obvious what is going on).
No tests, as we would need to be able to write to "/" to do
so. I did manually confirm that:
sudo git init /
cd /
git rev-parse --show-toplevel
git config core.worktree
still finds the top-level correctly (as "/"), and does not
set any core.worktree variable.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Setting receive.denycurrentbranch to updateinstead and pushing into
the current branch, when the working tree and the index is truly
clean, is supposed to reset the working tree and the index to match
the tree of the pushed commit. This did not work when pushing into
an unborn branch.
The code that drives push-to-checkout hook needs no change, as the
interface is defined so that hook can decide what to do when the
push is coming to an unborn branch and take an appropriate action
since the beginning.
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git show-branch --topics <rev> <revs>..." displays ancestry graph, only
considering commits that are in all given revs, except the first one.
"git show-branch" displays ancestry graph for all local branches.
Unfortunately, "git show-branch --topics <rev>" only prints out the rev
info for the given rev, and nothing else, e.g.:
$ git show-branch --topics origin/master
[origin/master] Sync with 2.3.3
While there is an option to add all remote-tracking branches (-r), and
another to add all local+remote branches (-a), there is no option to add
only local branches. Adding such an option could be considered, but a
user would likely already expect that the above command line considers
the lack of rev other than for --topics as meaning all local branches,
like when there is no argument at all.
Moreover, when using -r and -a along with --topics, the first local or
remote-tracking branch, depending on alphabetic order is used instead of
the one given after --topics (any rev given on the command line is
actually simply ignored when either -r or -a is given). And if no rev is
given at all, the fact that the first alphetical branch is the base of
topics is probably not expected by users (Maybe --topics should always
require one rev on the command line?)
This change makes
"show-branch --topics $rev"
act as
"show-branch --topics $rev $(git for-each-ref refs/heads
--format='%(refname:short)')"
"show-branch -r --topics $rev ..."
act as
"show-branch --topics $rev ... $(git for-each-ref refs/remotes
--format='%(refname:short)')"
instead of
"show-branch --topics $(git for-each-ref refs/remotes
--format='%(refname:short)')"
and
"show-branch -a --topics $rev ..."
act as
"show-branch --topics $rev ... $(git for-each-ref refs/heads refs/remotes
--format='%(refname:short)')"
instead of
"show-branch --topics $(git for-each-ref refs/heads refs/remotes
--format='%(refname:short)')"
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git prune --worktrees` was pruning worktrees which were non-existent OR
expired, while it rather should prune those which are orphaned AND
expired, as git-checkout documentation describes. Fix it.
Add test 'not prune proper checkouts', which uses valid but expired
worktree.
Modify test 'not prune recent checkouts' to remove the worktree before
pruning - link in worktrees still must survive. In older form it is
useless because would pass always when the other test passes.
Signed-off-by: Max Kirillov <max@max630.net>
Acked-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we find an object in a packfile index, we make sure we
can still open the packfile itself (or that it is already
open), as it might have been deleted by a simultaneous
repack. If we can't access the packfile, we print a warning
for the user and tell the caller that we don't have the
object (we can then look in other packfiles, or find a loose
version, before giving up).
The warning we print to the user isn't really accomplishing
anything, and it is potentially confusing to users. In the
normal case, it is complete noise; we find the object
elsewhere, and the user does not have to care that we racily
saw a packfile index that became stale. It didn't affect the
operation at all.
A possibly more interesting case is when we later can't find
the object, and report failure to the user. In this case the
warning could be considered a clue toward that ultimate
failure. But it's not really a useful clue in practice. We
wouldn't even print it consistently (since we are racing
with another process, we might not even see the .idx file,
or we might win the race and open the packfile, completing
the operation).
This patch drops the warning entirely (not only from the
fill_pack_entry site, but also from an identical use in
pack-objects). If we did find the warning interesting in the
error case, we could stuff it away and reveal it to the user
when we later die() due to the broken object. But that
complexity just isn't worth it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though "git grep --quiet" is run merely to ask for the exit
status, we spawned the pager regardless. Stop doing that.
* ws/grep-quiet-no-pager:
grep: fix "--quiet" overwriting current output
An failure early in the "git clone" that started creating the
working tree and repository could have resulted in some directories
and files left without getting cleaned up.
* jk/cleanup-failed-clone:
clone: drop period from end of die_errno message
clone: initialize atexit cleanup handler earlier
"git prune" used to largely ignore broken refs when deciding which
objects are still being used, which could spread an existing small
damage and make it a larger one.
* jk/prune-with-corrupt-refs:
refs.c: drop curate_packed_refs
repack: turn on "ref paranoia" when doing a destructive repack
prune: turn on ref_paranoia flag
refs: introduce a "ref paranoia" flag
t5312: test object deletion code paths in a corrupted repository
* sb/leaks:
http: release the memory of a http pack request as well
read-cache: fix memleak
add_to_index(): free unused cache-entry
commit.c: fix a memory leak
http-push: remove unneeded cleanup
merge-recursive: fix memleaks
merge-blobs.c: fix a memleak
builtin/apply.c: fix a memleak
update-index: fix a memleak
read-cache: free cache entry in add_to_index in case of early return
"git tag -h" used to show the "--column" and "--sort" options
that are about listing in a wrong section.
* jk/tag-h-column-is-a-listing-option:
tag: fix some mis-organized options in "-h" listing
"git prune" used to largely ignore broken refs when deciding which
objects are still being used, which could spread an existing small
damage and make it a larger one.
* jk/prune-with-corrupt-refs:
refs.c: drop curate_packed_refs
repack: turn on "ref paranoia" when doing a destructive repack
prune: turn on ref_paranoia flag
refs: introduce a "ref paranoia" flag
t5312: test object deletion code paths in a corrupted repository
An failure early in the "git clone" that started creating the
working tree and repository could have resulted in some directories
and files left without getting cleaned up.
* jk/cleanup-failed-clone:
clone: drop period from end of die_errno message
clone: initialize atexit cleanup handler earlier
Even though "git grep --quiet" is run merely to ask for the exit
status, we spawned the pager regardless. Stop doing that.
* ws/grep-quiet-no-pager:
grep: fix "--quiet" overwriting current output
The expected call sequence is for the caller to use match_pathspec()
repeatedly on a set of pathspecs, accumulating the "hits" in a
separate array, and then call this function to diagnose a pathspec
that never matched anything, as that can indicate a typo from the
command line, e.g. "git commit Maekfile".
Many builtin commands use this function from builtin/ls-files.c,
which is not a very healthy arrangement. ls-files might have been
the first command to feel the need for such a helper, but the need
is shared by everybody who uses the "match and then report" pattern.
Move it to dir.c where match_pathspec() is defined.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Entries added by "git add -N" are reminder for the user so that they
don't forget to add them before committing. These entries appear in
the index even though they are not real. Their presence in the index
leads to a confusing "git status" like this:
On branch master
Changes to be committed:
new file: foo
Changes not staged for commit:
modified: foo
If you do a "git commit", "foo" will not be included even though
"status" reports it as "to be committed". This patch changes the
output to become
On branch master
Changes not staged for commit:
new file: foo
no changes added to commit
The two hunks in diff-lib.c adjust "diff-index" and "diff-files" so
that i-t-a entries appear as new files in diff-files and nothing in
diff-index.
Due to this change, diff-files may start to report "new files" for the
first time. "add -u" needs to be told about this or it will die in
denial, screaming "new files can't exist! Reality is wrong." Luckily,
it's the only one among run_diff_files() callers that needs fixing.
Now in the new world order, a hierarchy in the index that contain
i-t-a paths is written out as a tree object as if these i-t-a
entries do not exist, and comparing the index with such a tree
object that would result from writing out the hierarchy will result
in no difference. Update a test in t2203 that expected the i-t-a
entries to appear as "added to the index" in the comparison to
instead expect no output.
An earlier change eec3e7e4 (cache-tree: invalidate i-t-a paths after
generating trees, 2012-12-16) becomes an unnecessary pessimization
in the new world order---a cache-tree in the index that corresponds
to a hierarchy with i-t-a paths can now be marked as valid and
record the object name of the tree that results from writing a tree
object out of that hierarchy, as it will compare equal to that tree.
Reverting the commit is left for the future, though, as it is purely
a performance issue and no longer affects correctness.
Helped-by: Michael J Gruber <git@drmicha.warpmail.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Restructure "git push" codepath to make it easier to add new
configuration bits and then add push.followTags configuration that
turns --follow-tags option on by default.
* jk/push-config:
push: allow --follow-tags to be set by config push.followTags
cmd_push: pass "flags" pointer to config callback
cmd_push: set "atomic" bit directly
git_push_config: drop cargo-culted wt_status pointer
"git tag -h" used to show the "--column" and "--sort" options
that are about listing in a wrong section.
* jk/tag-h-column-is-a-listing-option:
tag: fix some mis-organized options in "-h" listing
oldlines is allocated earlier in the function and also freed on the
successful code path.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`old` is not used outside the loop and would get lost
once we reach the goto.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Portability fixes and workarounds for shell scripts have been added
to help BSD-derived systems.
* km/bsd-shells:
t5528: do not fail with FreeBSD shell
help.c: use SHELL_PATH instead of hard-coded "/bin/sh"
git-compat-util.h: move SHELL_PATH default into header
git-instaweb: use @SHELL_PATH@ instead of /bin/sh
git-instaweb: allow running in a working tree subdirectory
"git branch" on a detached HEAD always said "(detached from xyz)",
even when "git status" would report "detached at xyz". The HEAD is
actually at xyz and haven't been moved since it was detached in
such a case, but the user cannot read what the current value of
HEAD is when "detached from" is used.
* mg/detached-head-report:
branch: name detached HEAD analogous to status
wt-status: refactor detached HEAD analysis
If we are repacking with "-ad", we will drop any unreachable
objects. Likewise, using "-Ad --unpack-unreachable=<time>"
will drop any old, unreachable objects. In these cases, we
want to make sure the reachability we compute with "--all"
is complete. We can do this by passing GIT_REF_PARANOIA=1 in
the environment to pack-objects.
Note that "-Ad" is safe already, because it only loosens
unreachable objects. It is up to "git prune" to avoid
deleting them.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prune should know about broken objects at the tips of refs,
so that we can feed them to our traversal rather than
ignoring them. It's better for us to abort the operation on
the broken object than it is to start deleting objects with
an incomplete view of the reachability namespace.
Note that for missing objects, aborting is the best we can
do. For a badly-named ref, we technically could use its sha1
as a reachability tip. However, the iteration code just
feeds us a null sha1, so there would be a reasonable amount
of code involved to pass down our wishes. It's not really
worth trying to do better, because this is a case that
should happen extremely rarely, and the message we provide:
fatal: unable to parse object: refs/heads/bogus:name
is probably enough to point the user in the right direction.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not usually end our errors with a full stop, but it
looks especially bad when you use die_errno, which adds a
colon, like:
fatal: could not create work tree dir 'foo'.: No such file or directory
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If clone fails, we generally try to clean up any directories
we've created. We do this by installing an atexit handler,
so that we don't have to manually trigger cleanup. However,
since we install this after touching the filesystem, any
errors between our initial mkdir() and our atexit() call
will result in us leaving a crufty directory around.
We can fix this by moving our atexit() call earlier. It's OK
to do it before the junk_work_tree variable is set, because
remove_junk makes sure the variable is initialized. This
means we "activate" the handler by assigning to the
junk_work_tree variable, which we now bump down to just
after we call mkdir(). We probably do not want to do it
before, because a plausible reason for mkdir() to fail is
EEXIST (i.e., we are racing with another "git init"), and we
would not want to remove their work.
OTOH, this is probably not that big a deal; we will allow
cloning into an empty directory (and skip the mkdir), which
is already racy (i.e., one clone may see the other's empty
dir and start writing into it). Still, it does not hurt to
err on the side of caution here.
Note that writing into junk_work_tree and junk_git_dir after
installing the handler is also technically racy, as we call
our handler on an async signal. Depending on the platform,
we could see a sheared write to the variables. Traditionally
we have not worried about this, and indeed we already do
this later in the function. If we want to address that, it
can come as a separate topic.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When grep is called with the --quiet option, the pager is initialized
despite not being used. When the pager is "less", anything output by
previous commands and not ended with a newline is overwritten:
$ echo -n aaa; echo bbb
aaabbb
$ echo -n aaa; git grep -q foo; echo bbb
bbb
This can be worked around, for example, by making sure STDOUT is not a
TTY or more directly by setting git's pager to "cat":
$ echo -n aaa; git grep -q foo > /dev/null; echo bbb
aaabbb
$ echo -n aaa; PAGER=cat git grep -q foo; echo bbb
aaabbb
But prevent calling the pager in the first place, which would also
save an unnecessary fork().
Signed-off-by: Wilhelm Schuermann <wimschuermann@googlemail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Description given by "grep -h" for its --exclude-standard option
was phrased poorly.
* nd/grep-exclude-standard-help-fix:
grep: correct help string for --exclude-standard
"git apply" was not very careful about reading from, removing,
updating and creating paths outside the working tree (under
--index/--cached) or the current directory (when used as a
replacement for GNU patch).
* jc/apply-beyond-symlink:
apply: do not touch a file beyond a symbolic link
apply: do not read from beyond a symbolic link
apply: do not read from the filesystem under --index
apply: reject input that touches outside the working area
Convert some magic numbers to the new GIT_SHA1 constants.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user enables untracked cache, then
- move worktree to an unsupported filesystem
- or simply upgrade OS
- or move the whole (portable) disk from one machine to another
- or access a shared fs from another machine
there's no guarantee that untracked cache can still function properly.
Record the worktree location and OS footprint in the cache. If it
changes, err on the safe side and disable the cache. The user can
'update-index --untracked-cache' again to make sure all conditions are
met.
This adds a new requirement that setup_git_directory* must be called
before read_cache() because we need worktree location by then, or the
cache is dropped.
This change does not cover all bases, you can fool it if you try
hard. The point is to stop accidents.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
update_index_if_able() is moved down so that the updated untracked
cache could be written out.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "git tag -h" currently prints:
[...]
Tag creation options
[...]
--column[=<style>] show tag list in columns
--sort <type> sort tags
Tag listing options
--contains <commit> print only tags that contain the commit
--points-at <object> print only tags of the object
The "--column" and "--sort" options should go under the "Tag listing" group.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user has set SHELL_PATH in the Makefile then we
should respect that value and use it.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various issues around "reflog expire", e.g. using --updateref when
expiring a reflog for a symbolic reference, have been corrected
and/or made saner.
* mh/expire-updateref-fixes:
reflog_expire(): never update a reference to null_sha1
reflog_expire(): ignore --updateref for symbolic references
reflog: improve and update documentation
struct ref_lock: delete the force_write member
lock_ref_sha1_basic(): do not set force_write for missing references
write_ref_sha1(): move write elision test to callers
write_ref_sha1(): remove check for lock == NULL
The prompt string "remove?" used when "git clean -i" asks the user
if a path should be removed was localizable, but the code always
expects a substring of "yes" to tell it to go ahead. Always show
[y/N] as part of this prompt to hint that the answer is not (yet)
localized.
* ja/clean-confirm-i18n:
Add hint interactive cleaning
Description given by "grep -h" for its --exclude-standard option
was phrased poorly.
* nd/grep-exclude-standard-help-fix:
grep: correct help string for --exclude-standard
Code cleanups.
* rs/simple-cleanups:
sha1_name: use strlcpy() to copy strings
pretty: use starts_with() to check for a prefix
for-each-ref: use skip_prefix() to avoid duplicate string comparison
connect: use strcmp() for string comparison
"git status" carefully names a detached HEAD "at" resp. "from" a rev or
ref depending on whether the detached HEAD has moved since. "git branch"
always uses "from", which can be confusing, because a status-aware user
would interpret this as moved detached HEAD.
Make "git branch" use the same logic and wording.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clear the git_zstream variable at the start of git_deflate_init() etc.
so that callers don't have to do that.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleanups.
* rs/simple-cleanups:
sha1_name: use strlcpy() to copy strings
pretty: use starts_with() to check for a prefix
for-each-ref: use skip_prefix() to avoid duplicate string comparison
connect: use strcmp() for string comparison
Simplify the ref transaction API around how "the ref should be
pointing at this object" is specified.
* mh/refs-have-new:
refs.h: remove duplication in function docstrings
update_ref(): improve documentation
ref_transaction_verify(): new function to check a reference's value
ref_transaction_delete(): check that old_sha1 is not null_sha1
ref_transaction_create(): check that new_sha1 is valid
commit: avoid race when creating orphan commits
commit: add tests of commit races
ref_transaction_delete(): remove "have_old" parameter
ref_transaction_update(): remove "have_old" parameter
struct ref_update: move "have_old" into "flags"
refs.c: change some "flags" to "unsigned int"
refs: remove the gap in the REF_* constant values
refs: move REF_DELETING to refs.c
Revamp the "git reflog" usage documentation in the manpage and the
command help to match the current reality and improve its clarity:
* Add documentation for some options that had been left out.
* Group the subcommands and options more logically and move more
common subcommands/options higher.
* Improve some explanations.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply --whitespace=fix" fixed whitespace errors in the common
context lines but did so without reporting.
* jc/apply-ws-fix-expands-report:
apply: detect and mark whitespace errors in context lines when fixing
"git apply" was not very careful about reading from, removing,
updating and creating paths outside the working tree (under
--index/--cached) or the current directory (when used as a
replacement for GNU patch).
* jc/apply-beyond-symlink:
apply: do not touch a file beyond a symbolic link
apply: do not read from beyond a symbolic link
apply: do not read from the filesystem under --index
apply: reject input that touches outside the working area
For translators, specify that a [y/N] reply is needed.
Also capitalize the first word in the prompt, as all the other
interactive prompts from this command are capitalized.
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For each object in the input pack, we need one struct object_entry. On
x86-64, this struct is 64 bytes long. Although:
- The 8 bytes for delta_depth and base_object_no are only useful when
show_stat is set. And it's never set unless someone is debugging.
- The three fields hdr_size, type and real_type take 4 bytes each
even though they never use more than 4 bits.
By moving delta_depth and base_object_no out of struct object_entry
and make the other 3 fields one byte long instead of 4, we shrink 25%
of this struct.
On a 3.4M object repo (*) that's about 53MB. The saving is less
impressive compared to index-pack memory use for basic bookkeeping (**),
about 16%.
(*) linux-2.6.git already has 4M objects as of v3.19-rc7 so this is
not an unrealistic number of objects that we have to deal with.
(**) 3.4M * (sizeof(object_entry) + sizeof(delta_entry)) = 311MB
Brought-up-by: Matthew Sporleder <msporleder@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current help string is about --no-exclude-standard. But "git grep -h"
would show --exclude-standard instead. Flip the string. See 0a93fb8
(grep: teach --untracked and --exclude-standard options - 2011-09-27)
for more info about these options.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply --whitespace=fix" used to under-allocate the memory
when the fix resulted in a longer text than the original patch.
* jc/apply-ws-fix-expands:
apply: count the size of postimage correctly
apply: make update_pre_post_images() sanity check the given postlen
apply.c: typofix
The error message from "git commit", when a non-existing author
name was given as value to the "--author=" parameter, has been
reworded to avoid misunderstanding.
* mg/commit-author-no-match-malformed-message:
commit: reword --author error message
Setting diff.submodule to 'log' made "git format-patch" produce
broken patches.
* dk/format-patch-ignore-diff-submodule:
format-patch: ignore diff.submodule setting
t4255: test am submodule with diff.submodule
"git blame HEAD -- missing" failed to correctly say "HEAD" when it
tried to say "No such path 'missing' in HEAD".
* jk/blame-commit-label:
blame.c: fix garbled error message
use xstrdup_or_null to replace ternary conditionals
builtin/commit.c: use xstrdup_or_null instead of envdup
builtin/apply.c: use xstrdup_or_null instead of null_strdup
git-compat-util: add xstrdup_or_null helper
Use skip_prefix() to get the part after "color:" (if present) and only
compare it with "reset" instead of comparing the whole string again.
This gets rid of the duplicate "color:" part of the string constant.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If NULL is passed to ref_transaction_update()'s new_sha1 parameter,
then just verify old_sha1 (under lock) without trying to change the
new value of the reference.
Use this functionality to add a new function ref_transaction_verify(),
which checks the current value of the reference under lock but doesn't
change it.
Use ref_transaction_verify() in the implementation of "git update-ref
--stdin"'s "verify" command to avoid the awkward need to "update" the
reference to its existing value.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If HEAD doesn't point at anything during the initial check, then we
should make sure that it *still* doesn't point at anything when we are
ready to update the reference. Otherwise, another process might commit
while we are working (e.g., while we are waiting for the user to edit
the commit message) and we will silently overwrite it.
This fixes a failing test in t7516.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead, verify the reference's old value if and only if old_sha1 is
non-NULL.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead, verify the reference's old value if and only if old_sha1 is
non-NULL.
ref_transaction_delete() will get the same treatment in a moment.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the following functions' "flags" arguments from "int" to
"unsigned int":
* ref_transaction_update()
* ref_transaction_create()
* ref_transaction_delete()
* update_ref()
* delete_ref()
* lock_ref_sha1_basic()
Also change the "flags" member in "struct ref_update" to unsigned.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will let us manipulate any transport flags which have matching
config options (there are none yet, but we will add one in
the next patch).
We could also just make "flags" a static file-scope global,
but the result is a little confusing. We end up passing it
along through do_push and push_with_options, each of which
further munge it. Having slightly-differing versions of the
flags variable available to those functions would probably
cause more confusion than it is worth. Let's just keep the
original local to cmd_push, and it can continue to pass it
through the call-stack.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the code shorter and more obvious by removing an
unnecessary interim variable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message from "git commit", when a non-existing author
name was given as value to the "--author=" parameter, has been
reworded to avoid misunderstanding.
* mg/commit-author-no-match-malformed-message:
commit: reword --author error message
"git apply --whitespace=fix" used to under-allocate the memory
when the fix resulted in a longer text than the original patch.
* jc/apply-ws-fix-expands:
apply: count the size of postimage correctly
apply: make update_pre_post_images() sanity check the given postlen
apply.c: typofix
The push config callback does not expect any incoming data
via the void pointer. And if it did, it would certainly not
be a "struct wt_status". This probably got picked up
accidentally in b945901 (push: heed user.signingkey for
signed pushes, 2014-10-22), which copied the template for
the config callback from builtin/commit.c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few files include the same header file directly more than once.
As all these headers protect themselves against repeated inclusion
by the "#ifndef FOO_H / #define FOO_H / ... / #endif" idiom, leave
only the first inclusion and remove the later inclusion as a no-op
clean-up.
Signed-off-by: Дилян Палаузов <git-dpa@aegee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extending the js/push-to-deploy topic, the behaviour of "git push"
when updating the working tree and the index with an update to the
branch that is checked out can be tweaked by push-to-checkout hook.
* jc/push-to-checkout:
receive-pack: support push-to-checkout hook
receive-pack: refactor updateInstead codepath
"git push" has been taught a "--atomic" option that makes push to
update more than one ref an "all-or-none" affair.
* sb/atomic-push:
Document receive.advertiseatomic
t5543-atomic-push.sh: add basic tests for atomic pushes
push.c: add an --atomic argument
send-pack.c: add --atomic command line argument
send-pack: rename ref_update_to_be_sent to check_to_send_update
receive-pack.c: negotiate atomic push support
receive-pack.c: add execute_commands_atomic function
receive-pack.c: move transaction handling in a central place
receive-pack.c: move iterating over all commands outside execute_commands
receive-pack.c: die instead of error in case of possible future bug
receive-pack.c: shorten the execute_commands loop over all commands
Restructure "reflog expire" to fit the reflogs better with the
recently updated ref API.
Looked reasonable (except that some shortlog entries stood out like
a sore thumb).
* mh/reflog-expire: (24 commits)
refs.c: let fprintf handle the formatting
refs.c: don't expose the internal struct ref_lock in the header file
lock_any_ref_for_update(): inline function
refs.c: remove unlock_ref/close_ref/commit_ref from the refs api
reflog_expire(): new function in the reference API
expire_reflog(): treat the policy callback data as opaque
Move newlog and last_kept_sha1 to "struct expire_reflog_cb"
expire_reflog(): move rewrite to flags argument
expire_reflog(): move verbose to flags argument
expire_reflog(): pass flags through to expire_reflog_ent()
struct expire_reflog_cb: a new callback data type
Rename expire_reflog_cb to expire_reflog_policy_cb
expire_reflog(): move updateref to flags argument
expire_reflog(): move dry_run to flags argument
expire_reflog(): add a "flags" argument
expire_reflog(): extract two policy-related functions
Extract function should_expire_reflog_ent()
expire_reflog(): use a lock_file for rewriting the reflog file
expire_reflog(): return early if the reference has no reflog
expire_reflog(): rename "ref" parameter to "refname"
...
Setting diff.submodule to 'log' made "git format-patch" produce
broken patches.
* dk/format-patch-ignore-diff-submodule:
format-patch: ignore diff.submodule setting
t4255: test am submodule with diff.submodule
"git blame HEAD -- missing" failed to correctly say "HEAD" when it
tried to say "No such path 'missing' in HEAD".
* jk/blame-commit-label:
blame.c: fix garbled error message
use xstrdup_or_null to replace ternary conditionals
builtin/commit.c: use xstrdup_or_null instead of envdup
builtin/apply.c: use xstrdup_or_null instead of null_strdup
git-compat-util: add xstrdup_or_null helper
run_setup_gently() is called before merge-file. This may result in changing
current working directory, which wasn't taken into account when opening a file
for writing.
Fix by prepending the passed prefix. Previous var is left so that error
messages keep referring to the file from the user's working directory
perspective.
Signed-off-by: Aleksander Boruch-Gruszecki <aleksander.boruchgruszecki@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because Git tracks symbolic links as symbolic links, a path that
has a symbolic link in its leading part (e.g. path/to/dir/file,
where path/to/dir is a symbolic link to somewhere else, be it
inside or outside the working tree) can never appear in a patch
that validly applies, unless the same patch first removes the
symbolic link to allow a directory to be created there.
Detect and reject such a patch.
Things to note:
- Unfortunately, we cannot reuse the has_symlink_leading_path()
from dir.c, as that is only about the working tree, but "git
apply" can be told to apply the patch only to the index or to
both the index and to the working tree.
- We cannot directly use has_symlink_leading_path() even when we
are applying only to the working tree, as an early patch of a
valid input may remove a symbolic link path/to/dir and then a
later patch of the input may create a path path/to/dir/file, but
"git apply" first checks the input without touching either the
index or the working tree. The leading symbolic link check must
be done on the interim result we compute in-core (i.e. after the
first patch, there is no path/to/dir symbolic link and it is
perfectly valid to create path/to/dir/file).
Similarly, when an input creates a symbolic link path/to/dir and
then creates a file path/to/dir/file, we need to flag it as an
error without actually creating path/to/dir symbolic link in the
filesystem.
Instead, for any patch in the input that leaves a path (i.e. a non
deletion) in the result, we check all leading paths against the
resulting tree that the patch would create by inspecting all the
patches in the input and then the target of patch application
(either the index or the working tree).
This way, we catch a mischief or a mistake to add a symbolic link
path/to/dir and a file path/to/dir/file at the same time, while
allowing a valid patch that removes a symbolic link path/to/dir and
then adds a file path/to/dir/file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We should reject a patch, whether it renames/copies dir/file to
elsewhere with or without modificiation, or updates dir/file in
place, if "dir/" part is actually a symbolic link to elsewhere,
by making sure that the code to read the preimage does not read
from a path that is beyond a symbolic link.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently read the preimage to apply a patch from the index only
when the --cached option is given. Do so also when the command is
running under the --index option. With --index, the index entry and
the working tree file for a path that is involved in a patch must be
identical, so this should not affect the result, but by reading from
the index, we will get the protection to avoid reading an unintended
path beyond a symbolic link automatically.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, a patch that affects outside the working area (either a
Git controlled working tree, or the current working directory when
"git apply" is used as a replacement of GNU patch) is rejected as a
mistake (or a mischief). Git itself does not create such a patch,
unless the user bends over backwards and specifies a non-standard
prefix to "git diff" and friends.
When `git apply` is used as a "better GNU patch", the user can pass
the `--unsafe-paths` option to override this safety check. This
option has no effect when `--index` or `--cached` is in use.
The new test was stolen from Jeff King with slight enhancements.
Note that a few new tests for touching outside the working area by
following a symbolic link are still expected to fail at this step,
but will be fixed in later steps.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since ea02ffa3 (mailmap: simplify map_user() interface, 2013-01-05),
find_alignment() has been invoking commit_info_destroy() on an
uninitialized auto 'struct commit_info' (when METAINFO_SHOWN is not
set). commit_info_destroy() calls strbuf_release() for each
'commit_info' strbuf member, which randomly invokes free() on
whatever random stack value happens to reside in strbuf.buf, thus
leading to periodic crashes.
Reported-by: Dilyan Palauzov <dilyan.palauzov@aegee.org>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/atomic-push:
Document receive.advertiseatomic
t5543-atomic-push.sh: add basic tests for atomic pushes
push.c: add an --atomic argument
send-pack.c: add --atomic command line argument
send-pack: rename ref_update_to_be_sent to check_to_send_update
receive-pack.c: negotiate atomic push support
receive-pack.c: add execute_commands_atomic function
receive-pack.c: move transaction handling in a central place
receive-pack.c: move iterating over all commands outside execute_commands
receive-pack.c: die instead of error in case of possible future bug
receive-pack.c: shorten the execute_commands loop over all commands
* mh/reflog-expire: (24 commits)
refs.c: let fprintf handle the formatting
refs.c: don't expose the internal struct ref_lock in the header file
lock_any_ref_for_update(): inline function
refs.c: remove unlock_ref/close_ref/commit_ref from the refs api
reflog_expire(): new function in the reference API
expire_reflog(): treat the policy callback data as opaque
Move newlog and last_kept_sha1 to "struct expire_reflog_cb"
expire_reflog(): move rewrite to flags argument
expire_reflog(): move verbose to flags argument
expire_reflog(): pass flags through to expire_reflog_ent()
struct expire_reflog_cb: a new callback data type
Rename expire_reflog_cb to expire_reflog_policy_cb
expire_reflog(): move updateref to flags argument
expire_reflog(): move dry_run to flags argument
expire_reflog(): add a "flags" argument
expire_reflog(): extract two policy-related functions
Extract function should_expire_reflog_ent()
expire_reflog(): use a lock_file for rewriting the reflog file
expire_reflog(): return early if the reference has no reflog
expire_reflog(): rename "ref" parameter to "refname"
...
If an --author argument is specified but does not contain a '>' then git tries
to find the argument within the existing authors; and gives the error
message "No existing author found with '%s'" if there is no match.
This is confusing for users who try to specify a valid complete author
name.
Rename the error message to make it clearer that the failure has two
reasons in this case.
(This codepath is touched only when we know already that the argument
cannot be a completely wellformed author ident.)
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the incoming patch has whitespace errors in a common context
line (i.e. a line that is expected to be found and is not modified
by the patch), "apply --whitespace=fix" corrects the whitespace
errors the line has, in addition to the whitespace error on a line
that is updated by the patch. However, we did not count and report
that we fixed whitespace errors on such lines.
[jc: This is iffy. What if the whitespace error has been fixed in
the target since the patch was written? A common context line we
see in the patch has errors, and it matches a line in the target
that has the errors already corrected, resulting in no change, which
we may not want to count after all. On the other hand, we are
reporting whitespace errors _in_ the incoming patch, so...]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Under --whitespace=fix option, match_fragment() function examines
the preimage (the common context and the removed lines in the patch)
and the file being patched and checks if they match after correcting
all whitespace errors. When they are found to match, the common
context lines in the preimage is replaced with the fixed copy,
because these lines will then be copied to the corresponding place
in the postimage by a later call to update_pre_post_images(). Lines
that are added in the postimage, under --whitespace=fix, have their
whitespace errors already fixed when apply_one_fragment() prepares
the preimage and the postimage, so in the end, application of the
patch can be done by replacing the block of text in the file being
patched that matched the preimage with what is in the postimage that
was updated by update_pre_post_images().
In the earlier days, fixing whitespace errors always resulted in
reduction of size, either collapsing runs of spaces in the indent to
a tab or removing the trailing whitespaces. These days, however,
some whitespace error fix results in extending the size.
250b3c6c (apply --whitespace=fix: avoid running over the postimage
buffer, 2013-03-22) tried to compute the final postimage size but
its math was flawed. It counted the size of the block of text in
the original being patched after fixing the whitespace errors on its
lines that correspond to the preimage. That number does not have
much to do with how big the final postimage would be.
Instead count (1) the added lines in the postimage, whose size is
the same as in the final patch result because their whitespace
errors have already been corrected, and (2) the fixed size of the
lines that are common.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply --whitespace=fix" used to be able to assume that fixing
errors will always reduce the size by e.g. stripping whitespaces at
the end of lines or collapsing runs of spaces into tabs at the
beginning of lines. An update to accomodate fixes that lengthens
the result by e.g. expanding leading tabs into spaces were made long
time ago but the logic miscounted the necessary space after such
whitespace fixes, leading to either under-allocation or over-usage
of already allocated space.
Illustrate this with a runtime sanity-check to protect us from
future breakage. The test was stolen from Kyle McKay who helped
to identify the problem.
Helped-by: "Kyle J. McKay" <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote add $name $URL" is now allowed when "url.$URL.insteadOf"
is already defined.
* js/remote-add-with-insteadof:
Add a regression test for 'git remote add <existing> <same-url>'
git remote: allow adding remotes agreeing with url.<...>.insteadOf
This patch puts the usage info strings that were not already in docopt-
like format into docopt-like format, which will be a litle easier for
end users and a lot easier for translators. Changes include:
- Placing angle brackets around fill-in-the-blank parameters
- Putting dashes in multiword parameter names
- Adding spaces to [-f|--foobar] to make [-f | --foobar]
- Replacing <foobar>* with [<foobar>...]
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cat_one_file(), "type" and "size" variables are defined in the
function scope, and then two variables of the same name are defined
in a block in one of the if/else statement, hiding the definitions
in the outer scope.
Because the values of the outer variables before the control enters
this scope, however, do not have to be preserved, we can remove
useless definitions of variables from the inner scope safely without
breaking anything.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The helper functions prepare_final() and prepare_initial() return a
pointer to a string that is a member of an object in the revs->pending
array. This array is later rebuilt when running prepare_revision_walk()
which potentially transforms the pointer target into a bogus string. Fix
this by maintaining a copy of the original string.
Signed-off-by: Lukas Fleischer <git@cryptocrack.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only reason for envdup to be its own function is that we
have to save the result in a temporary string. With
xstrdup_or_null, we can feed the result of getenv()
directly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This file had its own identical helper that predates
xstrdup_or_null. Let's use the global one to avoid
repetition.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code handling %(upstream:track) and %(upstream:trackshort)
assumed that it always had a valid branch that had been sanitized
earlier in populate_value(), and thus did not check the return value
of the call to stat_tracking_info().
While there is indeed some sanitization code that basically
corresponds to stat_tracking_info() returning 0 (no base branch
set), the function can also return -1 when the base branch did exist
but has since then been deleted.
In this case, num_ours and num_theirs had undefined values and a
call to `git for-each-ref --format="%(upstream:track)"` could print
spurious values such as
[behind -111794512]
[ahead 38881640, behind 5103867]
even for repositories with one single commit.
Verify stat_tracking_info()'s return value and do not print anything
if it returns -1. This behavior also matches the documentation ("has
no effect if the ref does not have tracking information associated
with it").
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Raphael Kubo da Costa <raphael.kubo.da.costa@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we made "rev-list --object-edge" more aggressively list the
objects at the edge commits, in order to reduce number of objects
fetched into a shallow repository, but the change affected cases
other than "fetching into a shallow repository" and made it
unusably slow (e.g. fetching into a normal repository should not
have to suffer the overhead from extra processing). Limit it to a
more specific case by introducing --objects-edge-aggressive, a new
option to rev-list.
* bc/fetch-thin-less-aggressive-in-normal-repository:
pack-objects: use --objects-edge-aggressive for shallow repos
rev-list: add an option to mark fewer edges as uninteresting
Documentation: add missing article in rev-list-options.txt
"git checkout-index --temp=$target $path" did not work correctly
for paths outside the current subdirectory in the project.
* es/checkout-index-temp:
checkout-index: fix --temp relative path mangling
t2004: demonstrate broken relative path printing
t2004: standardize file naming in symlink test
t2004: drop unnecessary write-tree/read-tree
t2004: modernize style
- "exec_cmd.h" became unnecessary at b931aa5a (Call builtin ls-tree
in git-cat-file -p, 2006-05-26), when it changed an earlier code
that delegated tree display to "ls-tree" via the run_command()
API (hence needing "exec_cmd.h") to call cmd_ls_tree() directly.
We should have removed the include in the same commit, but we
forgot to do so.
- "diff.h" was added at e5fba602 (textconv: support for cat_file,
2010-06-15), together with "userdiff.h", but "userdiff.h" can be
included without including "diff.h"; the header was unnecessary
from the beginning.
- "tag.h" and "tree.h" were necessary since 8e440259 (Use blob_,
commit_, tag_, and tree_type throughout., 2006-04-02) to check
the type of object by comparing typename with tree_type and
tag_type (pointers to extern strings).
21666f1a (convert object type handling from a string to a number,
2007-02-26) made these <type>_type strings unnecessary, and it
could have switched to include "object.h", which is necessary to
use typename(), but it forgot to do so. Because "tag.h" and
"tree.h" include "object.h", it did not need to explicitly
include "object.h" in order to start using typename() itself.
We do not even have to include "object.h" after removing these
two #includes, because "builtin.h" includes "commit.h" which in
turn includes "object.h" these days. This happened at 7b9c0a69
(git-commit-tree: make it usable from other builtins,
2008-07-01).
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When receive.denyCurrentBranch is set to updateInstead, a push that
tries to update the branch that is currently checked out is accepted
only when the index and the working tree exactly matches the
currently checked out commit, in which case the index and the
working tree are updated to match the pushed commit. Otherwise the
push is refused.
This hook can be used to customize this "push-to-deploy" logic. The
hook receives the commit with which the tip of the current branch is
going to be updated, and can decide what kind of local changes are
acceptable and how to update the index and the working tree to match
the updated tip of the current branch.
For example, the hook can simply run `git read-tree -u -m HEAD "$1"`
in order to emulate 'git fetch' that is run in the reverse direction
with `git push`, as the two-tree form of `read-tree -u -m` is
essentially the same as `git checkout` that switches branches while
keeping the local changes in the working tree that do not interfere
with the difference between the branches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a command line argument to the git push command to request atomic
pushes.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds support to send-pack to negotiate and use atomic pushes
iff the server supports it. Atomic pushes are activated by a new command
line flag --atomic.
In order to do this we also need to change the semantics for send_pack()
slightly. The existing send_pack() function actually doesn't send all the
refs back to the server when multiple refs are involved, for example
when using --all. Several of the failure modes for pushes can already be
detected locally in the send_pack client based on the information from the
initial server side list of all the refs as generated by receive-pack.
Any such refs that we thus know would fail to push are thus pruned from
the list of refs we send to the server to update.
For atomic pushes, we have to deal thus with both failures that are detected
locally as well as failures that are reported back from the server. In order
to do so we treat all local failures as push failures too.
We introduce a new status code REF_STATUS_ATOMIC_PUSH_FAILED so we can
flag all refs that we would normally have tried to push to the server
but we did not due to local failures. This is to improve the error message
back to the end user to flag that "these refs failed to update since the
atomic push operation failed."
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the atomic protocol option to allow
receive-pack to inform the client that it has
atomic push capability.
This commit makes the functionality introduced
in the previous commits go live for the serving
side. The changes in documentation reflect the
protocol capabilities of the server.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces the new function execute_commands_atomic which will use
one atomic transaction for all updates. The default behavior is still
the old non atomic way, one ref at a time. This is to cause as little
disruption as possible to existing clients. It is unknown if there are
client scripts that depend on the old non-atomic behavior so we make it
opt-in for now.
A later patch will add the possibility to actually use the functionality
added by this patch. For now use_atomic is always 0.
Inspired-by: Ronnie Sahlberg <sahlberg@google.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves all code related to transactions into the
execute_commands_non_atomic function. This includes
beginning and committing the transaction as well as
dealing with the errors which may occur during the
begin and commit phase of a transaction.
No functional changes intended.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit allows us in a later patch to easily distinguish between
the non atomic way to update the received refs and the atomic way which
is introduced in a later patch.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Discussion on the previous patch revealed we rather want to err on the
safe side. To do so we need to stop receive-pack in case of the possible
future bug when connectivity is not checked on a shallow push.
Also while touching that code we considered that removing the reported
refs may be harmful in some situations. Sound the message more like a
"This Cannot Happen, Please Investigate!" instead of giving advice to
remove refs.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the main "execute_commands" loop in receive-pack easier to read
by splitting out some steps into helper functions. The new helper
'should_process_cmd' checks if a ref update is unnecessary, whether
due to an error having occurred or for another reason. The helper
'warn_if_skipped_connectivity_check' warns if we have forgotten to
run a connectivity check on a ref which is shallow for the client
which would be a bug.
This will help us to duplicate less code in a later patch when we make
a second copy of the "execute_commands" loop.
No functional change intended.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.submodule when set to log produces output which git-am cannot
handle. Ignore this setting when generating patch output.
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_merge_bases*() API was easy to misuse by careless
copy&paste coders, leaving object flags tainted in the commits that
needed to be traversed.
* jc/merge-bases:
get_merge_bases(): always clean-up object flags
bisect: clean flags after checking merge bases
Noticed-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parse_options API expects an array of alternative usage lines
to which it automatically ads the language-appropriate "or" when
displaying. Each of these options is marked for translation with N_
and then later translated when gettext is called on each element
of the array.
Since the N_ macro just expands to its argument, if two N_-marked
strings appear next to each other without being separated by anything
else such as a comma, the preprocessor will join them into one string.
In that case two separate strings get marked for translation, but at
runtime they have been joined into a single string passed to gettext
which then fails to get translated because the combined string was
never marked for translation.
Fix this by properly separating the two N_ marked strings with
a comma and removing the embedded "\n" and " or:" that are
properly supplied by the parse_options API.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout-index --temp only properly prints relative paths which are
descendants of the current directory. Paths in ancestor or sibling
directories (or their children) are often printed in mangled form. For
example:
mkdir a bbb &&
>file &&
>bbb/file &&
git update-index --add file bbb/file &&
cd a &&
git checkout-index --temp ../file ../bbb/file
prints:
.merge_file_ooblek le
.merge_file_igloo0 b/file
rather than the correct:
.merge_file_ooblek ../file
.merge_file_igloo0 ../bbb/file
Internally, given the above example, checkout-index prefixes each input
argument with the name of the current directory ("a/", in this case),
and then assumes that it can simply skip forward by strlen("a/") bytes
to recover the original name. This works for files in the current
directory or its descendants, but fails for files in ancestors or
siblings (or their children) due to path normalization.
For instance, given "../file", "a/" is prepended, giving "a/../file".
Path normalization folds out "a/../", resulting in "file". Attempting
to recover the original name by skipping strlen("a/") bytes gives the
incorrect "le" rather than the desired "../file".
Fix this by taking advantage of write_name_quoted_relative() to recover
the original name properly, rather than assuming that it can be
recovered by skipping strlen(prefix) bytes.
As a bonus, this also fixes a bug in which checkout-index --temp
accessed and printed memory beyond the end-of-string. For instance,
within a subdirectory named "subdirectory", and given argument
"../file", prefixing would give "subdirectory/../file", which would
become "file" after normalization. checkout-index would then attempt to
recover the original name by skipping strlen("subdirectory/") bytes of
"file", which placed it well beyond end-of-string. Despite this error,
it often appeared to give the correct result, but only due to an
accident of implementation which left an apparently correct copy of the
path in memory following the normalized value. In particular, handed
"subdirectory/../file", in-place processing by normalize_path_copy_len()
resulted in "file\0rectory/../file". When checkout-index skipped
strlen("subdirectory/") bytes, it ended up back at "../file" and thus
appeared to give the correct answer, despite being past end-of-string.
Reported-by: Russ Cox <rsc@golang.org>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching into or pushing from a shallow repository, we want to
aggressively mark edges as uninteresting, since this decreases the pack
size. However, aggressively marking edges can negatively affect
performance on large non-shallow repositories with lots of refs.
Teach pack-objects a --shallow option to indicate that we're pushing
from or fetching into a shallow repository. Use
--objects-edge-aggressive only for shallow repositories and otherwise
use --objects-edge, which performs better in the general case. Update
the callers to pass the --shallow option when they are dealing with a
shallow repository.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit fbd4a70 (list-objects: mark more commits as edges in
mark_edges_uninteresting - 2013-08-16), we marked an increasing number
of edges uninteresting. This change, and the subsequent change to make
this conditional on --objects-edge, are used by --thin to make much
smaller packs for shallow clones.
Unfortunately, they cause a significant performance regression when
pushing non-shallow clones with lots of refs (23.322 seconds vs.
4.785 seconds with 22400 refs). Add an option to git rev-list,
--objects-edge-aggressive, that preserves this more aggressive behavior,
while leaving --objects-edge to provide more performant behavior.
Preserve the current behavior for the moment by using the aggressive
option.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git update-ref --stdin"'s verify command did not work well when
<oldvalue>, which is documented as optional, was missing.
* mh/update-ref-verify:
update-ref: fix "verify" command with missing <oldvalue>
t1400: add some more tests of "update-ref --stdin"'s verify command
When adding a remote, we make sure that the remote does not exist
already. However, this test was not quite correct: when the
url.<...>.insteadOf config variable was set to the remote name to be
added, the code would assume that the remote exists already.
Let's allow adding remotes when there is a url.<...>.insteadOf setting
when both the name and the URL agree with the remote to be added.
It might seem like a mistake to compare against remote->url[0] without
verifying that remote->url_nr >=1, but at this point a missing URL has
been filled by the name already, therefore url_nr cannot be zero.
Noticed by Anastas Dancha.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New tag object format validation added in 2.2 showed garbage
after a tagname it reported in its error message.
* js/fsck-tag-validation:
index-pack: terminate object buffers with NUL
fsck: properly bound "invalid tag name" error message
"git branch -d" (delete) and "git branch -m" (move) learned to
honor "-f" (force) flag; unlike many other subcommands, the way to
force these have been with separate "-D/-M" options, which was
inconsistent.
* mg/branch-d-m-f:
branch: allow -f with -m and -d
t3200-branch: test -M
"git ls-tree" does not support path selection based on negative
pathspecs, but did not error out when negative pathspecs are given.
* nd/ls-tree-pathspec:
t3102: style modernization
t3102: document that ls-tree does not yet support negated pathspec
ls-tree: disable negative pathspec because it's not supported
ls-tree: remove path filtering logic in show_tree
tree.c: update read_tree_recursive callback to pass strbuf as base
"git push" into a repository with a working tree normally refuses
to modify the branch that is checked out. The command learned to
optionally do an equivalent of "git reset --hard" only when there
is no change to the working tree and the index instead, which would
be useful to "deploy" by pushing into a repository.
* js/push-to-deploy:
t5516: more tests for receive.denyCurrentBranch=updateInstead
receive-pack: add another option for receive.denyCurrentBranch
The function sometimes returned a non-freeable memory and some
other times returned a piece of memory that must be freed.
* jc/exec-cmd-system-path-leak-fix:
system_path(): always return free'able memory to the caller
"git am" learned "--message-id" option to copy the message ID of
the incoming e-mail to the log message of resulting commit.
* pb/am-message-id-footer:
git-am: add --message-id/--no-message-id
git-mailinfo: add --message-id
"git remote update --prune" to drop many refs has been optimized.
* mh/simplify-repack-without-refs:
sort_string_list(): rename to string_list_sort()
prune_remote(): iterate using for_each_string_list_item()
prune_remote(): rename local variable
repack_without_refs(): make the refnames argument a string_list
prune_remote(): sort delete_refs_list references en masse
prune_remote(): initialize both delete_refs lists in a single loop
prune_remote(): exit early if there are no stale references
Some filesystems assign filemodes in a strange way, fooling then
automatic "filemode trustability" check done during a new
repository creation.
* tb/config-core-filemode-check-on-broken-fs:
init-db: improve the filemode trustability check
"git interpret-trailers" learned to properly handle the
"Conflicts:" block at the end.
* cc/interpret-trailers-more:
trailer: add test with an old style conflict block
trailer: reuse ignore_non_trailer() to ignore conflict lines
commit: make ignore_non_trailer() non static
merge & sequencer: turn "Conflicts:" hint into a comment
builtin/commit.c: extract ignore_non_trailer() helper function
merge & sequencer: unify codepaths that write "Conflicts:" hint
builtin/merge.c: drop a parameter that is never used
Git 2.0 was supposed to make the "simple" mode for the default of
"git push", but it didn't.
* jk/push-simple:
push: truly use "simple" as default, not "upstream"
"git init" (hence "git clone") initialized the per-repository
configuration file .git/config with x-bit by mistake.
* mh/config-flip-xbit-back-after-checking:
create_default_files(): don't set u+x bit on $GIT_DIR/config
"git config --get-color" did not parse its command line arguments
carefully.
* jk/colors-fix:
t4026: test "normal" color
config: fix parsing of "git config --get-color some.key -1"
docs: describe ANSI 256-color mode
"git checkout $treeish $path", when $path in the index and the
working tree already matched what is in $treeish at the $path,
still overwrote the $path unnecessarily.
* jk/checkout-from-tree:
checkout $tree: do not throw away unchanged index entries
Move expire_reflog() into refs.c and rename it to reflog_expire().
Turn the three policy functions into function pointers that are passed
into reflog_expire(). Add function prototypes and documentation to
refs.h.
[jc: squashed in $gmane/261582, drop "extern" in function definition]
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Tweaked-by: Ramsay Jones
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git 2.0 was supposed to make the "simple" mode for the default of
"git push", but it didn't.
* jk/push-simple:
push: truly use "simple" as default, not "upstream"
Now that expire_reflog() doesn't actually look in the
expire_reflog_policy_cb data structure, we can make it opaque:
* Change the callers of expire_reflog() to pass it a pointer to an
entire "struct expire_reflog_policy_cb" rather than a pointer to a
"struct cmd_reflog_expire_cb".
* Change expire_reflog() to accept the argument as a "void *" and
simply pass it through to the policy functions.
* Change the policy functions, reflog_expiry_prepare(),
reflog_expiry_cleanup(), and should_expire_reflog_ent(), to accept
"void *cb_data" arguments and cast them back to "struct
expire_reflog_policy_cb" internally.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These members are not needed by the policy functions.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The policy objects don't care about "--rewrite". So move it to
expire_reflog()'s flags parameter.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The policy objects don't care about "--verbose". So move it to
expire_reflog()'s flags parameter.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a flags field to "struct expire_reflog_cb", and pass the flags
argument through to expire_reflog_ent(). In a moment we will start
using it to pass through flags that expire_reflog_ent() needs.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new data type, "struct expire_reflog_cb", for holding the data
that expire_reflog() passes to expire_reflog_ent() via
for_each_reflog_ent(). For now it only holds a pointer to a "struct
expire_reflog_policy_cb", which still contains all of the actual data.
In future commits we will move some fields from the latter to the
former.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the first step towards separating the data needed by the
policy code from the data needed by the reflog expiration machinery.
(In a moment we will add a *new* "struct expire_reflog_cb" for the use
of expire_reflog() itself, then move fields selectively from
expire_reflog_policy_cb to expire_reflog_cb.)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The policy objects don't care about "--updateref". So move it to
expire_reflog()'s flags parameter.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The policy objects don't care about "--dry-run". So move it to
expire_reflog()'s flags parameter.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to separate the options relevant to the expiry machinery from
the options affecting the expiration policy. So add a "flags" argument
to expire_reflog() to hold the former.
The argument doesn't yet do anything.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract two functions, reflog_expiry_prepare() and
reflog_expiry_cleanup(), from expire_reflog(). This is a further step
towards separating the code for deciding on expiration policy from the
code that manages the physical deletion of reflog entries.
This change requires a couple of local variables from expire_reflog()
to be turned into fields of "struct expire_reflog_cb". More
reorganization of the callback data will follow in later commits.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract from expire_reflog_ent() a function that is solely responsible
for deciding whether a reflog entry should be expired. By separating
this "business logic" from the mechanics of actually expiring entries,
we are working towards the goal of encapsulating reflog expiry within
the refs API, with policy decided by a callback function passed to it
by its caller.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't actually need the locking functionality, because we already
hold the lock on the reference itself, which is how the reflog file is
locked. But the lock_file code can do some of the bookkeeping for us,
and it is more careful than the old code here was. For example:
* It correctly handles the case that the reflog lock file already
exists for some reason or cannot be opened.
* It correctly cleans up the lockfile if the program dies.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is very little cleanup needed if the reference has no reflog. If
we move the initialization of log_file down a bit, there's even less.
So instead of jumping to the cleanup code at the end of the function,
just do the cleanup and return inline.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is our usual convention.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to v1.5.4~14, expire_reflog() had to be an each_ref_fn because
it was passed to for_each_reflog(). Since then, there has been no
reason for it to implement the each_ref_fn interface. So...
* Remove the "unused" parameter (which took the place of "flags", but
was really unused).
* Declare the last parameter to be (struct cmd_reflog_expire_cb *)
rather than (void *).
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call strbuf_complete_line() instead of open-coding it. Also remove
surrounding comments indicating the intent to complete a line since
this information is already included in the function name.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To figure out the author ident for a commit, we call
determine_author_info(). This function collects information
from the environment, other commits (in the case of
"--amend" or "-c/-C"), and the "--author" option. It then
uses fmt_ident to generate the final ident string that goes
into the commit object. fmt_ident is therefore responsible
for any quality or validation checks on what is allowed to
go into a commit.
Before returning, though, we call split_ident_line on the
result, and feed the individual components to hooks via the
GIT_AUTHOR_* variables. Furthermore, we do extra validation
by feeding the split to sane_ident_split(), which is pickier
than fmt_ident (in particular, it will complain about an empty
email field). If this parsing or validation fails, we skip
updating the environment variables.
This is bad, because it means that hooks may silently see a
different ident than what we are putting into the commit. We
should drop the extra sane_ident_split checks entirely, and
take whatever fmt_ident has fed us (and what will go into
the commit object).
If parsing fails, we should actually abort here rather than
continuing (and feeding the hooks bogus data). However,
split_ident_line should never fail here. The ident was just
generated by fmt_ident, so we know that it's sane. We can
use assert_split_ident to double-check this.
Note that we also teach that assertion to check that we
found a date (it always should, but until now, no caller
cared whether we found a date or not). Checking the return
value of sane_ident_split is enough to ensure we have the
name/email pointers set, and checking date_begin is enough
to know that all of the date/tz variables are set.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we generate the commit-message template, we try to
report an author or committer ident that will be of interest
to the user: an author that does not match the committer, or
a committer that was auto-configured.
When doing so, if we encounter what we consider to be a
bogus ident, we immediately die. This is a bad idea, because
our use of the idents here is purely informational. Any
ident rules should be enforced elsewhere, because commits
that do not invoke the editor will not even hit this code
path (e.g., "git commit -mfoo" would work, but "git commit"
would not). So at best, we are redundant with other checks,
and at worse, we actively prevent commits that should
otherwise be allowed.
We should therefore do the minimal parsing we can to get a
value and not do any validation (i.e., drop the call to
sane_ident_split()).
In theory we could notice when even our minimal parsing
fails to work, and do the sane thing for each check (e.g.,
if we have an author but can't parse the committer, assume
they are different and print the author). But we can
actually simplify this even further.
We know that the author and committer strings we are parsing
have been generated by us earlier in the program, and
therefore they must be parseable. We could just call
split_ident_line without even checking its return value,
knowing that it will put _something_ in the name/mail
fields. Of course, to protect ourselves against future
changes to the code, it makes sense to turn this into an
assert, so we are not surprised if our assumption fails.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If "git update-ref --stdin" was given a "verify" command with no
"<newvalue>" at all (not even zeros), the code was mistakenly setting
have_old=0 (and leaving old_sha1 uninitialized). But this is
incorrect: this command is supposed to verify that the reference
doesn't exist. So in this case we really need old_sha1 to be set to
null_sha1 and have_old to be set to 1.
Moreover, since have_old was being set to zero, *no* check of the old
value was being done, so the new value of the reference was being set
unconditionally to the value in new_sha1. new_sha1, in turn, was set
to null_sha1 in the expectation that that was the old value and it
shouldn't be changed. But because the precondition was not being
checked, the result was that the reference was being deleted
unconditionally.
So, if <oldvalue> is missing, set have_old unconditionally and set
old_sha1 to null_sha1.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
-f/--force is the standard way to force an action, and is used by branch
for the recreation of existing branches, but not for deleting unmerged
branches nor for renaming to an existing branch.
Make "-m -f" equivalent to "-M" and "-d -f" equivalent to" -D", i.e.
allow -f/--force to be used with -m/-d also.
For the list modes, "-f" is simply ignored.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have some tricky checks in fsck that rely on a side effect of
require_end_of_header(), and would otherwise easily run outside
non-NUL-terminated buffers. This is a bit brittle, so let's make sure
that only NUL-terminated buffers are passed around to begin with.
Jeff "Peff" King contributed the detailed analysis which call paths are
involved and pointed out that we also have to patch the get_data()
function in unpack-objects.c, which is what Johannes "Dscho" Schindelin
implemented.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Analyzed-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A request to store an empty note via "git notes" meant to remove
note from the object but with --allow-empty we will store a (surprise!)
note that is empty. In the longer run, we might want to deprecate
the somewhat unintuitive "emptying means deletion" behaviour.
* jh/empty-notes:
t3301: modernize style
notes: empty notes should be shown by 'git log'
builtin/notes: add --allow-empty, to allow storing empty notes
builtin/notes: split create_note() to clarify add vs. remove logic
builtin/notes: simplify early exit code in add()
builtin/notes: refactor note file path into struct note_data
builtin/notes: improve naming
t3301: verify that 'git notes' removes empty notes by default
builtin/notes: fix premature failure when trying to add the empty blob
"git checkout $treeish $path", when $path in the index and the
working tree already matched what is in $treeish at the $path,
still overwrote the $path unnecessarily.
* jk/checkout-from-tree:
checkout $tree: do not throw away unchanged index entries
Keep the "there is nothing to update in a bare repository", "when
the check and update process runs, here are the GIT_DIR and
GIT_WORK_TREE" logic, which will be common regardless of how the
decision to update and the actual update are done, in the original
update_worktree() function, and split out the "working tree and
the index must match the original HEAD exactly" and "use two-way
read-tree to update the working tree" into a new push_to_deploy()
helper function. This will allow customizing the logic more cleanly
and easily.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-tree uses read_tree_recursive() which already does path filtering
using pathspec. No need to filter one more time based on prefix
only. "ls-tree ../somewhere" does not work because of
this. write_name_quotedpfx() can now be retired because nobody else
uses it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows the callback to use 'base' as a temporary buffer to
quickly assemble full path "without" extra allocation. The callback
has to restore it afterwards of course.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Non-recursive checkout creates empty directpries in place of submodules.
If then I try to "checkout --to" submodules there, it refuses to do so,
because directory already exists.
Fix by allowing checking out to empty directory. Add test and modify the
existing one so that it uses non-empty directory.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For normal use cases, it does not make sense for 'checkout' to work on
a bare repository, without a worktree. But "checkout --to" is an
exception because it _creates_ a new worktree. Allow this option to
run on bare repositories.
People who check out from a bare repository should remember that
core.logallrefupdates is off by default and it should be turned back
on. `--to` cannot do this automatically behind the user's back because
some user may deliberately want no reflog.
For people interested in repository setup/discovery code,
is_bare_repository_cfg (aka "core.bare") is unchanged by this patch,
which means 'true' by default for bare repos. Fortunately when we get
the repo through a linked checkout, is_bare_repository_cfg is never
used. So all is still good.
[nd: commit message]
Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In linked checkouts, borrowed parts like config is taken from
$GIT_COMMON_DIR. $GIT_DIR/config is never used. Report them as
garbage.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One branch obviously can't be checked out at two places (but detached
heads are ok). Give the user a choice in this case: --detach, -b
new-branch, switch branch in the other checkout first or simply 'cd'
and continue to work there.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
(alias R=$GIT_COMMON_DIR/worktrees/<id>)
- linked checkouts are supposed to keep its location in $R/gitdir up
to date. The use case is auto fixup after a manual checkout move.
- linked checkouts are supposed to update mtime of $R/gitdir. If
$R/gitdir's mtime is older than a limit, and it points to nowhere,
worktrees/<id> is to be pruned.
- If $R/locked exists, worktrees/<id> is not supposed to be pruned. If
$R/locked exists and $R/gitdir's mtime is older than a really long
limit, warn about old unused repo.
- "git checkout --to" is supposed to make a hard link named $R/link
pointing to the .git file on supported file systems to help detect
the user manually deleting the checkout. If $R/link exists and its
link count is greated than 1, the repo is kept.
Helped-by: Marc Branchaud <marcnarc@xiplink.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout --to" sets up a new working directory with a .git file
pointing to $GIT_DIR/worktrees/<id>. It then executes "git checkout"
again on the new worktree with the same arguments except "--to" is
taken out. The second checkout execution, which is not contaminated
with any info from the current repository, will actually check out and
everything that normal "git checkout" does.
Helped-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes common problems in these code about error handling,
forgetting to close the file handle after fprintf() fails, or not
printing out the error string..
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The repo setup procedure is updated to detect $GIT_DIR/commondir and
set $GIT_COMMON_DIR properly.
The core.worktree is ignored when $GIT_COMMON_DIR is set. This is
because the config file is shared in multi-checkout setup, but
checkout directories _are_ different. Making core.worktree effective
in all checkouts mean it's back to a single checkout.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Among pathnames in $GIT_DIR, e.g. "index" or "packed-refs", we want to
automatically and silently map some of them to the $GIT_DIR of the
repository we are borrowing from via $GIT_COMMON_DIR mechanism. When
we formulate the pathname for its lockfile, we want it to be in the
same location as its final destination. "index" is not shared and
needs to remain in the borrowing repository, while "packed-refs" is
shared and needs to go to the borrowed repository.
git_path() could be taught about the ".lock" suffix and map
"index.lock" and "packed-refs.lock" the same way their basenames are
mapped, but instead the caller can help by asking where the basename
(e.g. "index") is mapped to git_path() and then appending ".lock"
after the mapping is done.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We allow the user to relocate certain paths out of $GIT_DIR via
environment variables, e.g. GIT_OBJECT_DIRECTORY, GIT_INDEX_FILE and
GIT_GRAFT_FILE. Callers are not supposed to use git_path() or
git_pathdup() to get those paths. Instead they must use
get_object_directory(), get_index_file() and get_graft_file()
respectively. This is inconvenient and could be missed in review (for
example, there's git_path("objects/info/alternates") somewhere in
sha1_file.c).
This patch makes git_path() and git_pathdup() understand those
environment variables. So if you set GIT_OBJECT_DIRECTORY to /foo/bar,
git_path("objects/abc") should return /foo/bar/abc. The same is done
for the two remaining env variables.
"git rev-parse --git-path" is the wrapper for script use.
This patch kinda reverts a0279e1 (setup_git_env: use git_pathdup
instead of xmalloc + sprintf - 2014-06-19) because using git_pathdup
here would result in infinite recursion:
setup_git_env() -> git_pathdup("objects") -> .. -> adjust_git_path()
-> get_object_directory() -> oops, git_object_directory is NOT set
yet -> setup_git_env()
I wanted to make git_pathdup_literal() that skips adjust_git_path().
But that won't work because later on when $GIT_COMMON_DIR is
introduced, git_pathdup_literal("objects") needs adjust_git_path() to
replace $GIT_DIR with $GIT_COMMON_DIR.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous patch, git_snpath() is modified to allocate a new
strbuf buffer because vsnpath() needs that. But that makes it
awkward because git_snpath() receives a pre-allocated buffer from
outside and has to copy data back. Rename it to strbuf_git_path()
and make it receive strbuf directly.
Using git_path() in update_refs_for_switch() which used to call
git_snpath() is safe because that function and all of its callers do
not keep any pointer to the round-robin buffer pool allocated by
get_pathname().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before the previous commit, get_pathname returns an array of PATH_MAX
length. Even if git_path() and similar functions does not use the
whole array, git_path() caller can, in theory.
After the commit, get_pathname() may return a buffer that has just
enough room for the returned string and git_path() caller should never
write beyond that.
Make git_path(), mkpath() and git_path_submodule() return a const
buffer to make sure callers do not write in it at all.
This could have been part of the previous commit, but the "const"
conversion is too much distraction from the core changes in path.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tcl is conventionally spelled "Tcl". The description of
option "--tcl", however, spells it "tcl". Let's follow
the convention.
Reported-by: Hartmut Henkel <hartmut_henkel@gmx.de>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plan for the push.default transition had all along been
to use the "simple" method rather than "upstream" as a
default if the user did not specify their own push.default
value. Commit 11037ee (push: switch default from "matching"
to "simple", 2013-01-04) tried to implement that by moving
PUSH_DEFAULT_UNSPECIFIED in our switch statement to
fall-through to the PUSH_DEFAULT_SIMPLE case.
When the commit that became 11037ee was originally written,
that would have been enough. We would fall through to
calling setup_push_upstream() with the "simple" parameter
set to 1. However, it was delayed for a while until we were
ready to make the transition in Git 2.0.
And in the meantime, commit ed2b182 (push: change `simple`
to accommodate triangular workflows, 2013-06-19) threw a
monkey wrench into the works. That commit drops the "simple"
parameter to setup_push_upstream, and instead checks whether
the global "push_default" is PUSH_DEFAULT_SIMPLE. This is
right when the user has explicitly configured push.default
to simple, but wrong when we are a fall-through for the
"unspecified" case.
We never noticed because our push.default tests do not cover
the case of the variable being totally unset; they only
check the "simple" behavior itself.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When synchronizing between working directories, it can be handy to update
the current branch via 'push' rather than 'pull', e.g. when pushing a fix
from inside a VM, or when pushing a fix made on a user's machine (where
the developer is not at liberty to install an ssh daemon let alone know
the user's password).
The common workaround – pushing into a temporary branch and then merging
on the other machine – is no longer necessary with this patch.
The new option is:
'updateInstead':
Update the working tree accordingly, but refuse to do so if there
are any uncommitted changes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function sometimes returns a newly allocated string and
sometimes returns a borrowed string, the latter of which the callers
must not free(). The existing callers all assume that the return
value belongs to the callee and most of them copy it with strdup()
when they want to keep it around. They end up leaking the returned
copy when the callee returned a new string because they cannot tell
if they should free it.
Change the contract between the callers and system_path() to make
the returned string owned by the callers; they are responsible for
freeing it when done, but they do not have to make their own copy to
store it away.
Adjust the callers to make sure they do not leak the returned string
once they are done, but do not bother freeing it just before dying,
exiting or exec'ing other program to avoid unnecessary churn.
Reported-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option adds the content of the Message-Id header at the end of the
commit message prepared by git-mailinfo. This is useful in order to
associate commit messages automatically with mailing list discussions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new name is more consistent with the names of other
string_list-related functions.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Iterate over refs_to_prune using for_each_string_list_item() rather
than writing out the loop in longhand.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename "delete_refs_list" to "refs_to_prune". The new name is more
self-explanatory.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the callers have string_lists available already, whereas two
of them had to read data out of a string_list into an array of strings
just to call this function. So change repack_without_refs() to take
the list of refnames to omit as a string_list, and change the callers
accordingly.
Suggested-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inserting items into a list in sorted order is O(N^2) whereas
appending them unsorted and then sorting the list all at once is
O(N lg N).
string_list_insert() also removes duplicates, and this change loses
that functionality. But the strings in this list, which ultimately
come from a for_each_ref() iteration, cannot contain duplicates.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also free them together at the end of the function.
In a moment, the array version will become redundant. Managing them
together makes later steps more obvious.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aside from making the logic clearer, this avoids a call to
warn_dangling_symrefs(), which always does a for_each_rawref()
iteration.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some file systems do not support the executable bit:
a) The user executable bit is always 0, e.g. VFAT mounted with
-onoexec
b) The user executable bit is always 1, e.g. cifs mounted with
-ofile_mode=0755
c) There are system where user executable bit is 1 even if it
should be 0 like b), but the file mode can be maintained
locally. chmod -x changes the file mode from 0766 to 0666,
until the file system is unmounted and remounted and the file
mode is 0766 again.
This been observed when a Windows machine with NTFS exports a share to
Mac OS X via smb or afp.
Case a) and b) are handled by the current code. Case c) qualifies
as "non trustable executable bit" and core.filemode should be false,
but this is currently not done.
Detect when ".git/config" has the user executable bit set after
creat(".git/config", 0666) and set core.filemode to false. Because
the permission bits on the file is whatever the end user already had
when we are asked to reinitialise an existing repository, and do not
give any information on the filesystem behaviour, do this only when
running "git init" to create a new repository.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add foo bar" adds neither foo nor bar when bar is ignored, but dies
to let the user recheck their command invocation. This becomes less
helpful when "git add foo.*" is subject to shell expansion and some of
the expanded files are ignored.
"git add --ignore-errors" is supposed to ignore errors when indexing
some files and adds the others. It does ignore errors from actual
indexing attempts, but does not ignore the error "file is ignored" as
outlined above. This is unexpected.
Change "git add foo bar" to add foo when bar is ignored, but issue
a warning and return a failure code as before the change.
That is, in the case of trying to add ignored files we now act the same
way (with or without "--ignore-errors") in which we act for more
severe indexing errors when "--ignore-errors" is specified.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of git-config's command line options use OPT_BIT to
choose an action, and then parse the non-option arguments
in a context-dependent way. However, --get-color and
--get-colorbool are unlike the rest of the options, in that
they are OPT_STRING, taking the option name as a parameter.
This generally works, because we then use the presence of
those strings to set an action bit anyway. But it does mean
that the option-parser will continue looking for options
even after the key (because it is not a non-option; it is an
argument to an option). And running:
git config --get-color some.key -1
(to use "-1" as the default color spec) will barf, claiming
that "-1" is not an option. Instead, we should treat
--get-color and --get-colorbool as action bits, just like
--add, --get, and all the other actions, and then check that
the non-option arguments we got are sane. This fixes the
weirdness above, and makes those two options like all the
others.
This "fixes" a test in t4026, which checked that feeding
"-2" as a color should fail (it does fail, but prior to this
patch, because parseopt barfed, not because we actually ever
tried to parse the color).
This also catches other errors, like:
git config --get-color some.key black blue
which previously silently ignored "blue" (and now will
complain that you gave too many arguments).
There are some possible regressions, though. We now disallow
these, which currently do what you would expect:
# specifying other options after the action
git config --get-color some.key --file whatever
# using long-arg syntax
git config --get-color=some.key
However, we have never advertised these in the
documentation, and in fact they did not work in some older
versions of git. The behavior was apparently switched as an
accidental side effect of d64ec16 (git config: reorganize to
use parseopt, 2009-02-21).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of the option for argument "recurse-submodules"
is marked for translation even if it expects the untranslated
string and it's missing the option "on-demand" which was introduced
in eb21c73 (2014-03-29, push: teach --recurse-submodules the on-demand
option). Fix this by unmark the string for translation and add the
missing option.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since time immemorial, the test of whether to set "core.filemode"
has been done by trying to toggle the u+x bit on $GIT_DIR/config,
which we know always exists, and then testing whether the change
"took". I find it somewhat odd to use the config file for this
test, but whatever.
The test code didn't set the u+x bit back to its original state
itself, instead relying on the subsequent call to git_config_set()
to re-write the config file with correct permissions.
But ever since
daa22c6f8d config: preserve config file permissions on edits (2014-05-06)
git_config_set() copies the permissions from the old config file to
the new one. This is a good change in and of itself, but it
invalidates the create_default_files()'s assumption, causing "git
init" to leave the executable bit set on $GIT_DIR/config.
Reset the permissions on $GIT_DIR/config when we are done with the
test in create_default_files().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strings returned by git_path() are recycled after a while. Make
a copy of the config filename rather than holding onto the return
value from git_path().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using abs() on long values can cause truncation, so use labs() instead.
Reported by Clang 3.5 (-Wabsolute-value, enabled by -Wall).
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we "git checkout $tree", we pull paths from $tree into
the index, and then check the resulting entries out to the
worktree. Our method for the first step is rather
heavy-handed, though; it clobbers the entire existing index
entry, even if the content is the same. This means we lose
our stat information, leading checkout_entry to later
rewrite the entire file with identical content.
Instead, let's see if we have the identical entry already in
the index, in which case we leave it in place. That lets
checkout_entry do the right thing. Our tests cover two
interesting cases:
1. We make sure that a file which has no changes is not
rewritten.
2. We make sure that we do update a file that is unchanged
in the index (versus $tree), but has working tree
changes. We keep the old index entry, and
checkout_entry is able to realize that our stat
information is out of date.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although the "git notes" man page advertises that we support binary-safe
notes addition (using the -C option), we currently do not support adding
the empty note (i.e. using the empty blob to annotate an object). Instead,
an empty note is always treated as an intent to remove the note
altogether.
Introduce the --allow-empty option to the add/append/edit subcommands,
to explicitly allow an empty note to be stored into the notes tree.
Also update the documentation, and add test cases for the new option.
Reported-by: James H. Fisher <jhf@trifork.com>
Improved-by: Kyle J. McKay <mackyle@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
create_note() has a non-trivial interface, and comprises three loosely
related parts:
1. launching the editor with the note contents, if needed
2. appending to an existing note, if append_only was given
3. adding or removing the resulting note, based on whether it's non-empty
Split it along those lines to make the logic clearer: The first part
goes into a new function - prepare_note_data(), with a simpler interface.
The second part is moved into append_edit(), which is the only user of
this code. Finally, the add vs. remove decision is moved into the callers
(add() and append_edit()), keeping the logic for writing the actual note
object in a separate function: write_note_data().
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the need for 'retval' and the unnecessary goto. Also reorganize
to only call free_note_data() is actually needed.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the 'path' variable from create_note() and into the
note_data struct. Unify cleanup of note_data objects with
a free_note_data() function.
This might not make too much sense on its own, but it makes the
future refactoring of create_note() considerably cleaner.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for some needed refactoring, rename struct msg_arg to
struct note_data, and rename its instances from "msg" to "d" (also
removing some unnecessary parentheses). The 'msg_arg' name was
inherited from tag.c, but is not really a good name for the contents
of a note.
Also rename write_note_data() to copy_obj_to_fd(), which more aptly
describes what it actually does: Copying the contents of a git object
(given by its SHA1) into a given file descriptor.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a small buglet when trying to explicitly add the empty blob
as a note object using the -c or -C option to git notes add/append.
Instead of failing with a nonsensical error message indicating that the
empty blob does not exist, we should rather behave as if an empty notes
message was given (e.g. using -m "" or -F /dev/null).
The next patch contains a test that verifies the fixed behavior.
Found-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert users of struct child_process to using the managed argv_array
args instead of providing their own. This shortens the code a bit and
ensures that the allocated memory is released automatically after use.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/conflict-hint:
merge & sequencer: turn "Conflicts:" hint into a comment
builtin/commit.c: extract ignore_non_trailer() helper function
merge & sequencer: unify codepaths that write "Conflicts:" hint
builtin/merge.c: drop a parameter that is never used
git-tag.txt: Add a missing hyphen to `-s`
Corner-case bugfixes for "git fetch" around reflog handling.
* jk/fetch-reflog-df-conflict:
ignore stale directories when checking reflog existence
fetch: load all default config at startup
When we start the git-fetch program, we call git_config to
load all config, but our callback only processes the
fetch.prune option; we do not chain to git_default_config at
all.
This means that we may not load some core configuration
which will have an effect. For instance, we do not load
core.logAllRefUpdates, which impacts whether or not we
create reflogs in a bare repository.
Note that I said "may" above. It gets even more exciting. If
we have to transfer actual objects as part of the fetch,
then we call fetch_pack as part of the same process. That
function loads its own config, which does chain to
git_default_config, impacting global variables which are
used by the rest of fetch. But if the fetch is a pure ref
update (e.g., a new ref which is a copy of an old one), we
skip fetch_pack entirely. So we get inconsistent results
depending on whether or not we have actual objects to
transfer or not!
Let's just load the core config at the start of fetch, so we
know we have it (we may also load it again as part of
fetch_pack, but that's OK; it's designed to be idempotent).
Our tests check both cases (with and without a pack). We
also check similar behavior for push for good measure, but
it already works as expected.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callers of get_merge_bases() can choose to leave object flags
used during the merge-base traversal by passing cleanup=0 as a
parameter, but in practice a very few callers can afford to do so
(namely, "git merge-base"), as they need to compute merge base in
preparation for other processing of their own and they need to see
the object without contaminate flags.
Change the function signature of get_merge_bases_many() and
get_merge_bases() to drop the cleanup parameter, so that the
majority of the callers do not have to say ", 1" at the end.
Give a new get_merge_bases_many_dirty() API to support only a few
callers that know they do not need to spend cycles cleaning up the
object flags.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tighten the logic to decide that an unreachable cruft is
sufficiently old by covering corner cases such as an ancient object
becoming reachable and then going unreachable again, in which case
its retention period should be prolonged.
* jk/prune-mtime: (28 commits)
drop add_object_array_with_mode
revision: remove definition of unused 'add_object' function
pack-objects: double-check options before discarding objects
repack: pack objects mentioned by the index
pack-objects: use argv_array
reachable: use revision machinery's --indexed-objects code
rev-list: add --indexed-objects option
rev-list: document --reflog option
t5516: test pushing a tag of an otherwise unreferenced blob
traverse_commit_list: support pending blobs/trees with paths
make add_object_array_with_context interface more sane
write_sha1_file: freshen existing objects
pack-objects: match prune logic for discarding objects
pack-objects: refactor unpack-unreachable expiration check
prune: keep objects reachable from recent objects
sha1_file: add for_each iterators for loose and packed objects
count-objects: use for_each_loose_file_in_objdir
count-objects: do not use xsize_t when counting object size
prune-packed: use for_each_loose_file_in_objdir
reachable: mark index blobs as SEEN
...
If the asynchronous start of copy_to_sideband() fails, then any
env_array entries added to struct child_process proc by
prepare_push_cert_sha1() are leaked. Call the latter function only
after start_async() succeeded so that the allocated entries are
cleaned up automatically by start_command() or finish_command().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like other hints such as "Changes to be committed" we show in
the editor to remind the committer what paths were involved in the
resulting commit to help improving their log message, this section
is merely a reminder.
Traditionally, it was not made into comments primarily because it
has to be generated outside the wt-status infrastructure, and also
because it was meant as a bit stronger reminder than the others
(i.e. explaining how you resolved conflicts is much more important
than mentioning what you did to every paths involved in the commit).
But that still does not make this hint a part of the log message
proper, and not showing it as a comment is inviting mistakes.
Note that we still notice "Conflicts:" followed by list of indented
pathnames as an old-style cruft and insert a new Signed-off-by:
before it. This is so that "commit --amend -s" adds the new S-o-b
at the right place when used on an older commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract a helper function from prepare_to_commit() to determine
where to place a new Signed-off-by: line, which is essentially the
true "end" of the log message, ignoring the trailing "Conflicts:"
line and everything below it.
The detection _should_ make sure the "Conflicts:" line it finds is
truly the conflict hint block by checking everything that follows is
a HT indented pathname to avoid false positive, but this logic will
be revamped in a later patch to ignore comments and blanks anyway,
so it is left as-is in this step.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow us build with NO_PTHREADS=NoThanks compilation option.
* eb/no-pthreads:
Handle atexit list internaly for unthreaded builds
pack-objects: set number of threads before checking and warning
index-pack: fix compilation with NO_PTHREADS
Add managed "env" array to child_process to clarify the lifetime
rules.
* rs/run-command-env-array:
use env_array member of struct child_process
run-command: add env_array, an optional argv_array for env
