Replace pairs of alloc_ref() and strcpy() with alloc_ref_from_str(),
simplifying the code.
In connect.c, also a pair of alloc_ref() and memcpy() is replaced --
the additional cost of a strlen() call should not have too much of an
impact. Consistency and simplicity are more important.
In remote.c, the code was allocating 11 bytes more than needed for
the name part, but I couldn't see them being used for anything.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update release notes for 1.6.0.3
Teach rebase -i to honor pre-rebase hook
docs: describe pre-rebase hook
do not segfault if make_cache_entry failed
make prefix_path() never return NULL
fix bogus "diff --git" header from "diff --no-index"
Fix fetch/clone --quiet when stdout is connected
builtin-blame: Fix blame -C -C with submodules.
bash: remove fetch, push, pull dashed form leftovers
Conflicts:
diff.c
Fixes the `git clone --quiet` issue raised by Dave Jones in
http://marc.info/?l=git&m=121529226023180&w=2
With this simple patch applied we no longer see the following remote
messages as no-progress is correctly sent to the remote site:
remote: Counting objects: 84102, done.
remote: Compressing objects: 100% (24720/24720), done.
remote: Total 84102 (delta 60949), reused 80810 (delta 57900)
Signed-off-by: Tuncer Ayaz <tuncer.ayaz@gmail.com>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
"git push" enhancement allows the receiving end to report not only its own
refs but refs in repositories it borrows from via the alternate object
store mechanism. By telling the sender that objects reachable from these
extra refs are already complete in the receiving end, the number of
objects that need to be transfered can be cut down.
These entries are sent over the wire with string ".have", instead of the
actual names of the refs. This string was chosen so that they are ignored
by older programs at the sending end. If we sent some random but valid
looking refnames for these entries, "matching refs" rule (triggered when
running "git push" without explicit refspecs, where the sender learns what
refs the receiver has, and updates only the ones with the names of the
refs the sender also has) and "delete missing" rule (triggered when "git
push --mirror" is used, where the sender tells the receiver to delete the
refs it itself does not have) would try to update/delete them, which is
not what we want.
This prepares the send-pack (and "push" that runs native protocol) to
accept extended existing ref information and make use of it. The ".have"
entries are excluded from ref matching rules, and are exempt from deletion
rule while pushing with --mirror option, but are still used for pack
generation purposes by providing more "bottom" range commits.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when cloning from invalid HTTP URL, git clone will possibly
return curl error, then a confusing message about remote HEAD and then
return success and leave an empty repository behind, confusing either
the end-user or the automated service calling it (think repo.or.cz).
This patch changes the error() calls in get_refs_via_curl() to die()s,
akin to the other get_refs_*() functions.
Cc: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* qq/maint:
clone -q: honor "quiet" option over native transports.
attribute documentation: keep EXAMPLE at end
builtin-commit.c: Use 'git_config_string' to get 'commit.template'
http.c: Use 'git_config_string' to clean up SSL config.
diff.c: Use 'git_config_string' to get 'diff.external'
convert.c: Use 'git_config_string' to get 'smudge' and 'clean'
builtin-log.c: Use 'git_config_string' to get 'format.subjectprefix' and 'format.suffix'
Documentation cvs: Clarify when a bare repository is needed
Documentation: be precise about which date --pretty uses
Conflicts:
Documentation/gitattributes.txt
The earlier built-in conversion seems to have broken "git-clone"; this
teaches the command to honor the "-q" option again when talking to the
remote end over native transports (file://, git:// and ssh://).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If on Windows a path is specified as C:/path, then this is also a valid
SSH URL. To disambiguate between the two interpretations we take an URL
that looks like a path with a drive letter as a local URL.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
* db/clone-in-c:
Add test for cloning with "--reference" repo being a subset of source repo
Add a test for another combination of --reference
Test that --reference actually suppresses fetching referenced objects
clone: fall back to copying if hardlinking fails
builtin-clone.c: Need to closedir() in copy_or_link_directory()
builtin-clone: fix initial checkout
Build in clone
Provide API access to init_db()
Add a function to set a non-default work tree
Allow for having for_each_ref() list extra refs
Have a constant extern refspec for "--tags"
Add a library function to add an alternate to the alternates file
Add a lockfile function to append to a file
Mark the list of refs to fetch as const
Conflicts:
cache.h
t/t5700-clone-reference.sh
Also fix an underallocation in walker.c::interpret_target().
Signed-off-by: Krzysztof Kowalczyk <kkowalczyk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fetching the objects doesn't actually modify the list in any of the
code paths, so this will allow code that fetches the entire (const)
list of available refs to just pass the list in directly.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes a struct ref able to represent a symref, and makes http.c
able to recognize one, and makes transport.c look for "HEAD" as a ref
in the list, and makes it dereference symrefs for the resulting ref,
if any.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the remote peer upload-pack process supports the include-tag
protocol extension then we can avoid running a second fetch cycle
on the client side by letting the server send us the annotated tags
along with the objects it is packing for us. In the following graph
we can now fetch both "tag1" and "tag2" on the same connection that
we fetched "master" from the remote when we only have L available
on the local side:
T - tag1 S - tag2
/ /
L - o ------ o ------ B
\ \
\ \
origin/master master
The objects for "tag1" are implicitly downloaded without our direct
knowledge. The existing "quickfetch" optimization within git-fetch
discovers that tag1 is complete after the first connection and does
not open a second connection.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We always report to the user the list of refs we got from the first
connection, even if we do multiple connections. But we should always
use each connection's own list of refs in the communication with the
server, in case we got a different server out of DNS rotation or the
timing was surprising or something.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In transport.c, proxy setting (the one from the remote conf) was set through
curl_easy_setopt() call, while http.c already does the same with the
http.proxy setting. We now just use this infrastructure instead, and make
http_init() now take the struct remote as argument so that it can take the
http_proxy setting from there, and any other property that would be added
later.
At the same time, we make get_http_walker() take a struct remote argument
too, and pass it to http_init(), which makes remote defined proxy be used
for more than get_refs_via_curl().
We leave out http-fetch and http-push, which don't use remotes for the
moment, purposefully.
Signed-off-by: Mike Hommey <mh@glandium.org>
Acked-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
curl versions 7.16.3 to 7.18.0 included had a regression in which https
requests following curl_global_cleanup/init sequence would fail with ASN1
parser errors with curl-gnutls. Such sequences happen in some cases such
as git fetch.
We work around this by removing the http_init and http_cleanup calls from
get_refs_via_curl, replacing them with a transport->data initialization
with the http_walker (which does http_init).
While the http_walker is not currently used in get_refs_via_curl, http
and walker code refactor will make it use it.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
curl versions 7.16.3 to 7.18.0 included had a regression in which https
requests following curl_global_cleanup/init sequence would fail with ASN1
parser errors with curl-gnutls. Such sequences happen in some cases such
as git fetch.
We work around this by removing the http_init and http_cleanup calls from
get_refs_via_curl, replacing them with a transport->data initialization
with the http_walker (which does http_init).
While the http_walker is not currently used in get_refs_via_curl, http
and walker code refactor will make it use it.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This shares the connection between getting the remote ref list and
getting objects in the first batch. (A second connection is still used
to follow tags).
When we do not fetch objects (i.e. either ls-remote disconnects after
getting list of refs, or we decide we are already up-to-date), we
clean up the connection properly; otherwise the connection is left
open in need of cleaning up to avoid getting an error message from
the remote end when ssh is used.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A NUL byte at beginning of file, or just after a newline
would provoke an invalid buf[-1] access in a few places.
* builtin-grep.c (cmd_grep): Don't access buf[-1].
* builtin-pack-objects.c (get_object_list): Likewise.
* builtin-rev-list.c (read_revisions_from_stdin): Likewise.
* bundle.c (read_bundle_header): Likewise.
* server-info.c (read_pack_info_file): Likewise.
* transport.c (insert_packed_refs): Likewise.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code calls fetch_pack() to get the list of refs it fetched, and
discards refs and always returns 0 to signal success.
But builtin-fetch-pack.c::fetch_pack() has error cases. The function
returns NULL if error is detected (shallow-support side seems to choose
to die but I suspect that is easily fixable to error out as well).
Make fetch_refs_via_pack() propagate that error to the caller.
Acked-By: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As well as allowing a default http.proxy option, allow it to be set
per-remote.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/send-pack: (24 commits)
send-pack: cluster ref status reporting
send-pack: fix "everything up-to-date" message
send-pack: tighten remote error reporting
make "find_ref_by_name" a public function
Fix warning about bitfield in struct ref
send-pack: assign remote errors to each ref
send-pack: check ref->status before updating tracking refs
send-pack: track errors for each ref
git-push: add documentation for the newly added --mirror mode
Add tests for git push'es mirror mode
Update the tracking references only if they were succesfully updated on remote
Add a test checking if send-pack updated local tracking branches correctly
git-push: plumb in --mirror mode
Teach send-pack a mirror mode
send-pack: segfault fix on forced push
Reteach builtin-ls-remote to understand remotes
send-pack: require --verbose to show update of tracking refs
receive-pack: don't mention successful updates
more terse push output
Build in ls-remote
...
Because this function is static and used only by the
http-walker, when NO_CURL is defined, gcc emits a "defined
but not used" warning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/remote-builtin:
Reteach builtin-ls-remote to understand remotes
Build in ls-remote
Use built-in send-pack.
Build-in send-pack, with an API for other programs to call.
Build-in peek-remote, using transport infrastructure.
Miscellaneous const changes and utilities
Conflicts:
transport.c
A --verbose option to push should also be passed to the
transport layer, i.e. git-send-pack, git-http-push.
git push is modified to do so.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list of remote refs in struct transport should be const, because
builtin-fetch will get confused if it changes.
The url in git_connect should be const (and work on a copy) instead of
requiring the caller to copy it.
match_refs doesn't modify the refspecs it gets.
get_fetch_map and get_remote_ref don't change the list they get.
Allow transport get_refs_list methods to modify the struct transport.
Add a function to copy a list of refs, when a function needs a mutable
copy of a const list.
Add a function to check the type of a ref, as per the code in connect.c
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variable is always set if it is going to be used; gcc just does
not notice it.
Signed-off-by: Blake Ramsdell <blaker@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This prepares the API of git_connect() and finish_connect() to operate on
a struct child_process. Currently, we just use that object as a placeholder
for the pid that we used to return. A follow-up patch will change the
implementation of git_connect() and finish_connect() to make full use
of the object.
Old code had early-return-on-error checks at the calling sites of
git_connect(), but since git_connect() dies on errors anyway, these checks
were removed.
[sp: Corrected style nit of "conn == NULL" to "!conn"]
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the end-user requested a dry-run push we need to pass that flag
over to http-push and additionally make sure it does not actually
upload any changes to the remote server.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the end-user requested a dry-run push we should pass that flag
though to rsync so that the rsync command can show what it would do
(or not do) if push was to be executed without the --dry-run flag.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There's a number of tricky conflicts between master and
this topic right now due to the rewrite of builtin-push.
Junio must have handled these via rerere; I'd rather not
deal with them again so I'm pre-merging master into the
topic. Besides this topic somehow started to depend on
the strbuf series that was in next, but is now in master.
It no longer compiles on its own without the strbuf API.
* master: (184 commits)
Whip post 1.5.3.4 maintenance series into shape.
Minor usage update in setgitperms.perl
manual: use 'URL' instead of 'url'.
manual: add some markup.
manual: Fix example finding commits referencing given content.
Fix wording in push definition.
Fix some typos, punctuation, missing words, minor markup.
manual: Fix or remove em dashes.
Add a --dry-run option to git-push.
Add a --dry-run option to git-send-pack.
Fix in-place editing functions in convert.c
instaweb: support for Ruby's WEBrick server
instaweb: allow for use of auto-generated scripts
Add 'git-p4 commit' as an alias for 'git-p4 submit'
hg-to-git speedup through selectable repack intervals
git-svn: respect Subversion's [auth] section configuration values
gtksourceview2 support for gitview
fix contrib/hooks/post-receive-email hooks.recipients error message
Support cvs via git-shell
rebase -i: use diff plumbing instead of porcelain
...
Conflicts:
Makefile
builtin-push.c
rsh.c
There were a few places which did not cope well without curl. This
fixes all of them. We still need to link against the walker.o part
of the library as some parts of transport.o still call into there
even though we don't have HTTP support enabled.
If compiled with NO_CURL=1 we now get the following useful error
message:
$ git-fetch http://www.example.com/git
error: git was compiled without libcurl support.
fatal: Don't know how to fetch from http://www.example.com/git
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This adds a verbosity level below 0 for suppressing default messages
with --quiet, and makes the default for http be verbose instead of
quiet. This matches the behavior of the shell script version of git-fetch.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We lost rsync support when transitioning from shell to C. Support it
again (even if the transport is technically deprecated, some people just
do not have any chance to use anything else).
Also, add a test to t5510. Since rsync transport is not configured by
default on most machines, and especially not such that you can write to
rsync://127.0.0.1$(pwd)/, it is disabled by default; you can enable it by
setting the environment variable TEST_RSYNC.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently alloc_ref() expects the length of the refname plus 1
as its parameter, prepares that much space and returns a "ref"
structure for the caller to fill the refname. One caller in
transport.c::get_refs_from_bundle() however allocated one byte
less.
It may be a good idea to change the calling convention to give
alloc_ref() the length of the refname, but that clean-up can be
done in a separate patch. This patch only fixes the bug and
makes all callers consistent.
There was also one overallocation in connect.c, which would not
hurt but was wasteful. This patch fixes it as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most transport implementations tend to allocate a data buffer
in the struct transport instance during transport_get() so we
need to free that data buffer when we disconnect it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only way to configure the unpacking limit is currently through
the .git/config (or ~/.gitconfig) mechanism as we have no existing
command line option interface to control this threshold on a per
invocation basis. This was intentional by design as the storage
policy of the repository should be a repository-wide decision and
should not be subject to variations made on individual command
executions.
Earlier builtin-fetch was bypassing the unpacking limit chosen by
the user through the configuration file as it did not reread the
configuration options through fetch_pack_config if we called the
internal fetch_pack() API directly. We now ensure we always run the
config file through fetch_pack_config at least once in this process,
thereby setting our unpackLimit properly.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Copying the arguments from a fetch_pack_args into static globals
within the builtin-fetch-pack module is error-prone and may lead
rise to cases where arguments supplied via the struct from the
new fetch_pack() API may not be honored by the implementation.
Here we reorganize all of the static globals into a single static
struct fetch_pack_args instance and use memcpy() to move the data
from the caller supplied structure into the globals before we
execute our pack fetching implementation. This strategy is more
robust to additions and deletions of properties.
As keep_pack is a single bit we have also introduced lock_pack to
mean not only download and store the packfile via index-pack but
also to lock it against repacking by creating a .keep file when
the packfile itself is stored. The caller must remove the .keep
file when it is safe to do so.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aside from reducing the code by 20 lines this refactoring removes
a level of indirection when trying to access the operations of a
given transport "instance", making the code clearer and easier to
follow.
It also has the nice effect of giving us the benefits of C99 style
struct initialization (namely ".fetch = X") without requiring that
level of language support from our compiler. We don't need to worry
about new operation methods being added as they will now be NULL'd
out automatically by the xcalloc() we use to create the new struct
transport we supply to the caller.
This pattern already exists in struct walker, so we already have
a precedent for it in Git. We also don't really need to worry
about any sort of performance decreases that may occur as a result
of filling out 4-8 op pointers when we make a "struct transport".
The extra few CPU cycles this requires over filling in the "struct
transport_ops" is killed by the time it will take Git to actually
*use* one of those functions, as most transport operations are
going over the wire or will be copying object data locally between
two directories.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a transport doesn't support an option we already are telling
the higher level application (fetch or push) that the option is not
valid by sending back a >0 return value from transport_set_option
so there's not a strong motivation to have the function perform the
output itself. Instead we should let the higher level application
do the output if it is necessary. This avoids always telling the
user that depth isn't supported on HTTP urls even when they did
not pass a --depth option to git-fetch.
If the user passes an option and the option value is invalid we now
properly die in git-fetch instead of just spitting out a message
and running anyway. This mimics prior behavior better where
incorrect/malformed options are not accepted by the process.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
