Documentation for "git commit" was updated to clarify that "commit
-p <paths>" adds to the current contents of the index to come up
with what to commit.
* nd/commit-p-doc:
git-commit.txt: clarify --patch mode with pathspec
"git clone" of a local repository can be done at the filesystem
level, but the codepath did not check errors while copying and
adjusting the file that lists alternate object stores.
* jk/clone-copy-alternates-fix:
clone: detect errors in normalize_path_copy
http.emptyauth configuration is a way to allow an empty username to
pass when attempting to authenticate using mechanisms like
Kerberos. We took an unspecified (NULL) username and sent ":"
(i.e. no username, no password) to CURLOPT_USERPWD, but did not do
the same when the username is explicitly set to an empty string.
* dt/http-empty-auth:
http: http.emptyauth should allow empty (not just NULL) usernames
A low-level function verify_packfile() was meant to show errors
that were detected without dying itself, but under some conditions
it didn't and died instead, which has been fixed.
* jk/verify-packfile-gently:
verify_packfile: check pack validity before accessing data
"git worktree", even though it used the default_abbrev setting that
ought to be affected by core.abbrev configuration variable, ignored
the variable setting. The command has been taught to read the
default set of configuration variables to correct this.
* jc/worktree-config:
worktree: honor configuration variables
Codepaths that read from an on-disk loose object were too loose in
validating what they are reading is a proper object file and
sometimes read past the data they read from the disk, which has
been corrected. H/t to Gustavo Grieco for reporting.
* jc/verify-loose-object-header:
unpack_sha1_header(): detect malformed object header
streaming: make sure to notice corrupt object
The original command line syntax for "git merge", which was "git
merge <msg> HEAD <parent>...", has been deprecated for quite some
time, and "git gui" was the last in-tree user of the syntax. This
is finally fixed, so that we can move forward with the deprecation.
* rs/git-gui-use-modern-git-merge-syntax:
git-gui: stop using deprecated merge syntax
An author name, that spelled a backslash-quoted double quote in the
human readable part "My \"double quoted\" name", was not unquoted
correctly while applying a patch from a piece of e-mail.
* kd/mailinfo-quoted-string:
mailinfo: unescape quoted-pair in header fields
t5100-mailinfo: replace common path prefix with variable
Almost everybody uses DEFAULT_ABBREV to refer to the default
setting for the abbreviation, but "git blame" peeked into
underlying variable bypassing the macro for no good reason.
* jc/blame-abbrev:
blame: use DEFAULT_ABBREV macro
The "graph" API used in "git log --graph" miscounted the number of
output columns consumed so far when drawing a padding line, which
has been fixed; this did not affect any existing code as nobody
tried to write anything after the padding on such a line, though.
* jk/graph-padding-fix:
graph: fix extra spaces in graph_padding_line
The code that parses the format parameter of for-each-ref command
has seen a micro-optimization.
* sg/ref-filter-parse-optim:
ref-filter: strip format option after a field name only once while parsing
It is a common mistake to say "git blame --reverse OLD path",
expecting that the command line is dwimmed as if asking how lines
in path in an old revision OLD have survived up to the current
commit.
* jc/blame-reverse:
blame: dwim "blame --reverse OLD" as "blame --reverse OLD.."
blame: improve diagnosis for "--reverse NEW"
The existing "git fetch --depth=<n>" option was hard to use
correctly when making the history of an existing shallow clone
deeper. A new option, "--deepen=<n>", has been added to make this
easier to use. "git clone" also learned "--shallow-since=<date>"
and "--shallow-exclude=<tag>" options to make it easier to specify
"I am interested only in the recent N months worth of history" and
"Give me only the history since that version".
* nd/shallow-deepen: (27 commits)
fetch, upload-pack: --deepen=N extends shallow boundary by N commits
upload-pack: add get_reachable_list()
upload-pack: split check_unreachable() in two, prep for get_reachable_list()
t5500, t5539: tests for shallow depth excluding a ref
clone: define shallow clone boundary with --shallow-exclude
fetch: define shallow boundary with --shallow-exclude
upload-pack: support define shallow boundary by excluding revisions
refs: add expand_ref()
t5500, t5539: tests for shallow depth since a specific date
clone: define shallow clone boundary based on time with --shallow-since
fetch: define shallow boundary with --shallow-since
upload-pack: add deepen-since to cut shallow repos based on time
shallow.c: implement a generic shallow boundary finder based on rev-list
fetch-pack: use a separate flag for fetch in deepening mode
fetch-pack.c: mark strings for translating
fetch-pack: use a common function for verbose printing
fetch-pack: use skip_prefix() instead of starts_with()
upload-pack: move rev-list code out of check_non_tip()
upload-pack: make check_non_tip() clean things up on error
upload-pack: tighten number parsing at "deepen" lines
...
The command-line completion script (in contrib/) learned to
complete "git cmd ^mas<HT>" to complete the negative end of
reference to "git cmd ^master".
* cp/completion-negative-refs:
completion: support excluding refs
The ./configure script generated from configure.ac was taught how
to detect support of SSL by libcurl better.
* dp/autoconf-curl-ssl:
./configure.ac: detect SSL in libcurl using curl-config
When we started cURL to talk to imap server when a new enough
version of cURL library is available, we forgot to explicitly add
imap(s):// before the destination. To some folks, that didn't work
and the library tried to make HTTP(s) requests instead.
* ak/curl-imap-send-explicit-scheme:
imap-send: Tell cURL to use imap:// or imaps://
"git pack-objects" in a repository with many packfiles used to
spend a lot of time looking for/at objects in them; the accesses to
the packfiles are now optimized by checking the most-recently-used
packfile first.
* jk/pack-objects-optim-mru:
pack-objects: use mru list when iterating over packs
pack-objects: break delta cycles before delta-search phase
sha1_file: make packed_object_info public
provide an initializer for "struct object_info"
We call "qsort(array, nelem, sizeof(array[0]), fn)", and most of
the time third parameter is redundant. A new QSORT() macro lets us
omit it.
* rs/qsort:
show-branch: use QSORT
use QSORT, part 2
coccicheck: use --all-includes by default
remove unnecessary check before QSORT
use QSORT
add QSORT
The code that parses the format parameter of for-each-ref command
has seen a micro-optimization.
* sg/ref-filter-parse-optim:
ref-filter: strip format option after a field name only once while parsing
Code clean-up with help from coccinelle tool continues.
* rs/cocci:
coccicheck: make transformation for strbuf_addf(sb, "...") more precise
use strbuf_add_unique_abbrev() for adding short hashes, part 2
use strbuf_addstr() instead of strbuf_addf() with "%s", part 2
gitignore: ignore output files of coccicheck make target
When "%C(auto)" appears at the very beginning of the pretty format
string, it did not need to issue the reset sequence, but it did.
* rs/c-auto-resets-attributes:
pretty: avoid adding reset for %C(auto) if output is empty
In recent versions of cURL, GSSAPI credential delegation is
disabled by default due to CVE-2011-2192; introduce a configuration
to selectively allow enabling this.
* ps/http-gssapi-cred-delegation:
http: control GSSAPI credential delegation
The "graph" API used in "git log --graph" miscounted the number of
output columns consumed so far when drawing a padding line, which
has been fixed; this did not affect any existing code as nobody
tried to write anything after the padding on such a line, though.
* jk/graph-padding-fix:
graph: fix extra spaces in graph_padding_line
Almost everybody uses DEFAULT_ABBREV to refer to the default
setting for the abbreviation, but "git blame" peeked into
underlying variable bypassing the macro for no good reason.
* jc/blame-abbrev:
blame: use DEFAULT_ABBREV macro
"git log rev^..rev" is an often-used revision range specification
to show what was done on a side branch merged at rev. This has
gained a short-hand "rev^-1". In general "rev^-$n" is the same as
"^rev^$n rev", i.e. what has happened on other branches while the
history leading to nth parent was looking the other way.
* vn/revision-shorthand-for-side-branch-log:
revision: new rev^-n shorthand for rev^n..rev
When given an abbreviated object name that is not (or more
realistically, "no longer") unique, we gave a fatal error
"ambiguous argument". This error is now accompanied by hints that
lists the objects that begins with the given prefix. During the
course of development of this new feature, numerous minor bugs were
uncovered and corrected, the most notable one of which is that we
gave "short SHA1 xxxx is ambiguous." twice without good reason.
* jk/ambiguous-short-object-names:
get_short_sha1: make default disambiguation configurable
get_short_sha1: list ambiguous objects on error
for_each_abbrev: drop duplicate objects
sha1_array: let callbacks interrupt iteration
get_short_sha1: mark ambiguity error for translation
get_short_sha1: NUL-terminate hex prefix
get_short_sha1: refactor init of disambiguation code
get_short_sha1: parse tags when looking for treeish
get_sha1: propagate flags to child functions
get_sha1: avoid repeating ourselves via ONLY_TO_DIE
get_sha1: detect buggy calls with multiple disambiguators
When we are copying the alternates from the source
repository, if we find a relative path that is too deep for
the source (e.g., "../../../objects" from "/repo.git/objects"),
then normalize_path_copy will report an error and leave
trash in the buffer, which we will add to our new alternates
file. Instead, let's detect the error, print a warning, and
skip copying that alternate.
There's no need to die. The relative path is probably just
broken cruft in the source repo. If it turns out to have
been important for accessing some objects, we rely on other
parts of the clone to detect that, just as they would with a
missing object in the source repo itself (though note that
clones with "-s" are inherently local, which may do fewer
object-quality checks in the first place).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
How pathspec is used, with and without --interactive/--patch, is
different. But this is not clear from the document. These changes hint
the user to keep reading (to option #5) instead of stopping at #2 and
assuming --patch/--interactive behaves the same way.
And since all the options listed here always mention how the index is
involved (or not) in the final commit, add that bit for #5 as well. This
"on top of the index" is implied when you head over git-add(1), but if
you just go straight to the "Interactive mode" and not read what git-add
is for, you may miss it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using Kerberos authentication with newer versions of libcurl,
CURLOPT_USERPWD must be set to a value, even if it is an empty value.
The value is never sent to the server. Previous versions of libcurl
did not require this variable to be set. One way that some users
express the empty username/password is http://:@gitserver.example.com,
which http.emptyauth was designed to support. Another, equivalent,
URL is http://@gitserver.example.com. The latter leads to a username
of zero-length, rather than a NULL username, but CURLOPT_USERPWD still
needs to be set (if http.emptyauth is set). Do so.
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The codepath in "git fsck" to detect malformed tree objects has
been updated not to die but keep going after detecting them.
* dt/tree-fsck:
fsck: handle bad trees like other errors
tree-walk: be more specific about corrupt tree errors
An author name, that spelled a backslash-quoted double quote in the
human readable part "My \"double quoted\" name", was not unquoted
correctly while applying a patch from a piece of e-mail.
* kd/mailinfo-quoted-string:
mailinfo: unescape quoted-pair in header fields
t5100-mailinfo: replace common path prefix with variable
The original command line syntax for "git merge", which was "git
merge <msg> HEAD <parent>...", has been deprecated for quite some
time, and "git gui" was the last in-tree user of the syntax. This
is finally fixed, so that we can move forward with the deprecation.
* rs/git-gui-use-modern-git-merge-syntax:
git-gui: stop using deprecated merge syntax
Codepaths that read from an on-disk loose object were too loose in
validating what they are reading is a proper object file and
sometimes read past the data they read from the disk, which has
been corrected. H/t to Gustavo Grieco for reporting.
* jc/verify-loose-object-header:
unpack_sha1_header(): detect malformed object header
streaming: make sure to notice corrupt object
"git init" tried to record core.worktree in the repository's
'config' file when GIT_WORK_TREE environment variable was set and
it was different from where GIT_DIR appears as ".git" at its top,
but the logic was faulty when .git is a "gitdir:" file that points
at the real place, causing trouble in working trees that are
managed by "git worktree". This has been corrected.
* nd/init-core-worktree-in-multi-worktree-world:
init: kill git_link variable
init: do not set unnecessary core.worktree
init: kill set_git_dir_init()
init: call set_git_dir_init() from within init_db()
init: correct re-initialization from a linked worktree
"gitweb" can spawn "highlight" to show blob contents with
(programming) language-specific syntax highlighting, but only
when the language is known. "highlight" can however be told
to make the guess itself by giving it "--force" option, which
has been enabled.
* ik/gitweb-force-highlight:
gitweb: use highlight's shebang detection
gitweb: remove unused guess_file_syntax() parameter
