0
0
mirror of https://github.com/git/git.git synced 2024-12-19 23:05:47 +08:00
Commit Graph

13 Commits

Author SHA1 Message Date
Jeff King
4981fe750b pkt-line: share buffer/descriptor reading implementation
The packet_read function reads from a descriptor. The
packet_get_line function is similar, but reads from an
in-memory buffer, and uses a completely separate
implementation. This patch teaches the generic packet_read
function to accept either source, and we can do away with
packet_get_line's implementation.

There are two other differences to account for between the
old and new functions. The first is that we used to read
into a strbuf, but now read into a fixed size buffer. The
only two callers are fine with that, and in fact it
simplifies their code, since they can use the same
static-buffer interface as the rest of the packet_read_line
callers (and we provide a similar convenience wrapper for
reading from a buffer rather than a descriptor).

This is technically an externally-visible behavior change in
that we used to accept arbitrary sized packets up to 65532
bytes, and now cap out at LARGE_PACKET_MAX, 65520. In
practice this doesn't matter, as we use it only for parsing
smart-http headers (of which there is exactly one defined,
and it is small and fixed-size). And any extension headers
would be breaking the protocol to go over LARGE_PACKET_MAX
anyway.

The other difference is that packet_get_line would return
on error rather than dying. However, both callers of
packet_get_line are actually improved by dying.

The first caller does its own error checking, but we can
drop that; as a result, we'll actually get more specific
reporting about protocol breakage when packet_read dies
internally. The only downside is that packet_read will not
print the smart-http URL that failed, but that's not a big
deal; anybody not debugging can already see the remote's URL
already, and anybody debugging would want to run with
GIT_CURL_VERBOSE anyway to see way more information.

The second caller, which is just trying to skip past any
extra smart-http headers (of which there are none defined,
but which we allow to keep room for future expansion), did
not error check at all. As a result, it would treat an error
just like a flush packet. The resulting mess would generally
cause an error later in get_remote_heads, but now we get
error reporting much closer to the source of the problem.

Brown-paper-bag-fixes-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-24 00:14:15 -08:00
Jeff King
74543a0423 pkt-line: provide a LARGE_PACKET_MAX static buffer
Most of the callers of packet_read_line just read into a
static 1000-byte buffer (callers which handle arbitrary
binary data already use LARGE_PACKET_MAX). This works fine
in practice, because:

  1. The only variable-sized data in these lines is a ref
     name, and refs tend to be a lot shorter than 1000
     characters.

  2. When sending ref lines, git-core always limits itself
     to 1000 byte packets.

However, the only limit given in the protocol specification
in Documentation/technical/protocol-common.txt is
LARGE_PACKET_MAX; the 1000 byte limit is mentioned only in
pack-protocol.txt, and then only describing what we write,
not as a specific limit for readers.

This patch lets us bump the 1000-byte limit to
LARGE_PACKET_MAX. Even though git-core will never write a
packet where this makes a difference, there are two good
reasons to do this:

  1. Other git implementations may have followed
     protocol-common.txt and used a larger maximum size. We
     don't bump into it in practice because it would involve
     very long ref names.

  2. We may want to increase the 1000-byte limit one day.
     Since packets are transferred before any capabilities,
     it's difficult to do this in a backwards-compatible
     way. But if we bump the size of buffer the readers can
     handle, eventually older versions of git will be
     obsolete enough that we can justify bumping the
     writers, as well. We don't have plans to do this
     anytime soon, but there is no reason not to start the
     clock ticking now.

Just bumping all of the reading bufs to LARGE_PACKET_MAX
would waste memory. Instead, since most readers just read
into a temporary buffer anyway, let's provide a single
static buffer that all callers can use. We can further wrap
this detail away by having the packet_read_line wrapper just
use the buffer transparently and return a pointer to the
static storage.  That covers most of the cases, and the
remaining ones already read into their own LARGE_PACKET_MAX
buffers.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-20 13:42:22 -08:00
Jeff King
047ec60205 pkt-line: move LARGE_PACKET_MAX definition from sideband
Having the packet sizes defined near the packet read/write
functions makes more sense.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-20 13:42:22 -08:00
Jeff King
819b929d33 pkt-line: teach packet_read_line to chomp newlines
The packets sent during ref negotiation are all terminated
by newline; even though the code to chomp these newlines is
short, we end up doing it in a lot of places.

This patch teaches packet_read_line to auto-chomp the
trailing newline; this lets us get rid of a lot of inline
chomping code.

As a result, some call-sites which are not reading
line-oriented data (e.g., when reading chunks of packfiles
alongside sideband) transition away from packet_read_line to
the generic packet_read interface. This patch converts all
of the existing callsites.

Since the function signature of packet_read_line does not
change (but its behavior does), there is a possibility of
new callsites being introduced in later commits, silently
introducing an incompatibility.  However, since a later
patch in this series will change the signature, such a
commit would have to be merged directly into this commit,
not to the tip of the series; we can therefore ignore the
issue.

This is an internal cleanup and should produce no change of
behavior in the normal case. However, there is one corner
case to note. Callers of packet_read_line have never been
able to tell the difference between a flush packet ("0000")
and an empty packet ("0004"), as both cause packet_read_line
to return a length of 0. Readers treat them identically,
even though Documentation/technical/protocol-common.txt says
we must not; it also says that implementations should not
send an empty pkt-line.

By stripping out the newline before the result gets to the
caller, we will now treat the newline-only packet ("0005\n")
the same as an empty packet, which in turn gets treated like
a flush packet. In practice this doesn't matter, as neither
empty nor newline-only packets are part of git's protocols
(at least not for the line-oriented bits, and readers who
are not expecting line-oriented packets will be calling
packet_read directly, anyway). But even if we do decide to
care about the distinction later, it is orthogonal to this
patch.  The right place to tighten would be to stop treating
empty packets as flush packets, and this change does not
make doing so any harder.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-20 13:42:21 -08:00
Jeff King
0380942902 pkt-line: provide a generic reading function with options
Originally we had a single function for reading packetized
data: packet_read_line. Commit 46284dd grew a more "gentle"
form, packet_read, that returns an error instead of dying
upon reading a truncated input stream. However, it is not
clear from the names which should be called, or what the
difference is.

Let's instead make packet_read be a generic public interface
that can take option flags, and update the single callsite
that uses it. This is less code, more clear, and paves the
way for introducing more options into the generic interface
later. The function signature is changed, so there should be
no hidden conflicts with topics in flight.

While we're at it, we'll document how error conditions are
handled based on the options, and rename the confusing
"return_line_fail" option to "gentle_on_eof".  While we are
cleaning up the names, we can drop the "return_line_fail"
checks in packet_read_internal entirely.  They look like
this:

  ret = safe_read(..., return_line_fail);
  if (return_line_fail && ret < 0)
	  ...

The check for return_line_fail is a no-op; safe_read will
only ever return an error value if return_line_fail was true
in the first place.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-20 13:42:21 -08:00
Jeff King
cdf4fb8e33 pkt-line: drop safe_write function
This is just write_or_die by another name. The one
distinction is that write_or_die will treat EPIPE specially
by suppressing error messages. That's fine, as we die by
SIGPIPE anyway (and in the off chance that it is disabled,
write_or_die will simulate it).

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-20 13:42:21 -08:00
Jeff King
e148542870 pkt-line: move a misplaced comment
The comment describing the packet writing interface was
originally written above packet_write, but migrated to be
above safe_write in f3a3214, probably because it is meant to
generally describe the packet writing interface and not a
single function. Let's move it into the header file, where
users of the interface are more likely to see it.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-20 13:42:21 -08:00
Heiko Voigt
46284dd152 remove the impression of unexpectedness when access is denied
If a server accessed through ssh is denying access git will currently
issue the message

	"fatal: The remote end hung up unexpectedly"

as the last line. This sounds as if something really ugly just happened.
Since this is a quite typical situation in which users regularly get
we do not say that if it happens at the beginning when reading the
remote heads.

If its in the very first beginning of reading the remote heads it is
very likely an authentication error or a missing repository.

If it happens later during reading the remote heads we still indicate
that it happened during this initial contact phase.

Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-19 13:37:02 -07:00
Shawn O. Pearce
f5615d2467 pkt-line: Add strbuf based functions
These routines help to work with pkt-line values inside of a strbuf,
permitting simple formatting of buffered network messages.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-30 19:20:53 -07:00
Dennis Stosberg
07d68930c2 Fix pkt-line.h to compile with a non-GCC compiler
pkt-line.h uses GCC's __attribute__ extension but does not include
git-compat-util.h.  So it will not compile with a compiler that does
not support this extension.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-26 02:11:53 -07:00
Junio C Hamano
583b7ea31b upload-pack/fetch-pack: support side-band communication
This implements a protocol extension between fetch-pack and
upload-pack to allow stderr stream from upload-pack (primarily
used for the progress bar display) to be passed back.

Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-06-21 02:50:32 -07:00
Timo Sirainen
4ec99bf080 [PATCH] -Werror fixes
GCC's format __attribute__ is good for checking errors, especially
with -Wformat=2 parameter. This fixes most of the reported problems
against 2005-08-09 snapshot.
2005-08-09 22:28:19 -07:00
Linus Torvalds
f3a3214e83 Make send/receive-pack be closer to doing something interesting 2005-06-29 20:50:15 -07:00