Use of the `the_repository` variable is deprecated nowadays, and we
slowly but steadily convert the codebase to not use it anymore. Instead,
callers should be passing down the repository to work on via parameters.
It is hard though to prove that a given code unit does not use this
variable anymore. The most trivial case, merely demonstrating that there
is no direct use of `the_repository`, is already a bit of a pain during
code reviews as the reviewer needs to manually verify claims made by the
patch author. The bigger problem though is that we have many interfaces
that implicitly rely on `the_repository`.
Introduce a new `USE_THE_REPOSITORY_VARIABLE` macro that allows code
units to opt into usage of `the_repository`. The intent of this macro is
to demonstrate that a certain code unit does not use this variable
anymore, and to keep it from new dependencies on it in future changes,
be it explicit or implicit
For now, the macro only guards `the_repository` itself as well as
`the_hash_algo`. There are many more known interfaces where we have an
implicit dependency on `the_repository`, but those are not guarded at
the current point in time. Over time though, we should start to add
guards as required (or even better, just remove them).
Define the macro as required in our code units. As expected, most of our
code still relies on the global variable. Nearly all of our builtins
rely on the variable as there is no way yet to pass `the_repository` to
their entry point. For now, declare the macro in "biultin.h" to keep the
required changes at least a little bit more contained.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both `oidread()` and `oidclr()` use `the_repository` to derive the hash
function that shall be used. Require callers to pass in the hash
algorithm to get rid of this implicit dependency.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit f894081dea (pack-revindex: read multi-pack reverse indexes,
2021-03-30) introduced the `get_midx_rev_filename()` helper (later
modified by commit 60980aed78 (midx.c: write MIDX filenames to
strbuf, 2021-10-26)).
This function returns the location of the classic ".rev" files we used
to write for MIDXs (prior to 95e8383bac (midx.c: make changing the
preferred pack safe, 2022-01-25)), which is always of the form:
$GIT_DIR/objects/pack/multi-pack-index-$HASH.rev
Replace this function with a generic helper that populates a strbuf with
the above form, replacing the ".rev" extension with a caller-provided
argument.
This will allow us to remove a similarly-defined function in the
pack-bitmap code (used to determine the location of a MIDX .bitmap file)
by reimplementing it in terms of `get_midx_filename_ext()`.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIt 2.44 introduced a regression that makes the updated code to
barf in repositories with multi-pack index written by older
versions of Git, which has been corrected.
* ps/missing-btmp-fix:
pack-bitmap: gracefully handle missing BTMP chunks
In 0fea6b73f1 (Merge branch 'tb/multi-pack-verbatim-reuse', 2024-01-12)
we have introduced multi-pack verbatim reuse of objects. This series has
introduced a new BTMP chunk, which encodes information about bitmapped
objects in the multi-pack index. Starting with dab60934e3 (pack-bitmap:
pass `bitmapped_pack` struct to pack-reuse functions, 2023-12-14) we use
this information to figure out objects which we can reuse from each of
the packfiles.
One thing that we glossed over though is backwards compatibility with
repositories that do not yet have BTMP chunks in their multi-pack index.
In that case, `nth_bitmapped_pack()` would return an error, which causes
us to emit a warning followed by another error message. These warnings
are visible to users that fetch from a repository:
```
$ git fetch
...
remote: error: MIDX does not contain the BTMP chunk
remote: warning: unable to load pack: 'pack-f6bb7bd71d345ea9fe604b60cab9ba9ece54ffbe.idx', disabling pack-reuse
remote: Enumerating objects: 40, done.
remote: Counting objects: 100% (40/40), done.
remote: Compressing objects: 100% (39/39), done.
remote: Total 40 (delta 5), reused 0 (delta 0), pack-reused 0 (from 0)
...
```
While the fetch succeeds the user is left wondering what they did wrong.
Furthermore, as visible both from the warning and from the reuse stats,
pack-reuse is completely disabled in such repositories.
What is quite interesting is that this issue can even be triggered in
case `pack.allowPackReuse=single` is set, which is the default value.
One could have expected that in this case we fall back to the old logic,
which is to use the preferred packfile without consulting BTMP chunks at
all. But either we fail with the above error in case they are missing,
or we use the first pack in the multi-pack-index. The former case
disables pack-reuse altogether, whereas the latter case may result in
reusing objects from a suboptimal packfile.
Fix this issue by partially reverting the logic back to what we had
before this patch series landed. Namely, in the case where we have no
BTMP chunks or when `pack.allowPackReuse=single` are set, we use the
preferred pack instead of consulting the BTMP chunks.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new midx-write.c source file, which holds all of the
functionality from the MIDX sub-system related to writing new MIDX files.
Similar to the relationship between "pack-bitmap.c" and
"pack-bitmap-write.c", this source file will hold code that is specific
to writing MIDX files as opposed to reading them (the latter will remain
in midx.c).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Build the pack base name argument directly using strvec_pushf() instead
of with an intermediate strbuf. This is shorter, simpler and avoids the
need for explicit cleanup.
Signed-off-by: René Scharfe <l.s.r@web.de>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing a binary search over the objects in a MIDX's bitmap
(i.e. in pseudo-pack order), the reader reconstructs the pseudo-pack
ordering using a combination of (a) the preferred pack, (b) the pack's
lexical position in the MIDX based on pack names, and (c) the object
offset within the pack.
In order to perform this binary search, the reader must know the
identity of the preferred pack. This could be stored in the MIDX, but
isn't for historical reasons, mostly because it can easily be inferred
at read-time by looking at the object in the first bit position and
finding out which pack it was selected from in the MIDX, like so:
nth_midxed_pack_int_id(m, pack_pos_to_midx(m, 0));
In midx_to_pack_pos() which performs this binary search, we look up the
identity of the preferred pack before each search. This is relatively
quick, since it involves two table-driven lookups (one in the MIDX's
revindex for `pack_pos_to_midx()`, and another in the MIDX's object
table for `nth_midxed_pack_int_id()`).
But since the preferred pack does not change after the MIDX is written,
it is safe to cache this value on the MIDX itself.
Write a helper to do just that, and rewrite all of the existing
call-sites that care about the identity of the preferred pack in terms
of this new helper.
This will prepare us for a subsequent patch where we will need to binary
search through the MIDX's pseudo-pack order multiple times.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The multi-pack index API exposes a `midx_contains_pack()` function that
takes in a string ending in either ".idx" or ".pack" and returns whether
or not the MIDX contains a given pack corresponding to that string.
There is no corresponding function to locate the position of a pack
within the MIDX's pack order (sorted lexically by pack filename).
We could add an optional out parameter to `midx_contains_pack()` that is
filled out with the pack's position when the parameter is non-NULL. To
minimize the amount of fallout from this change, instead introduce a new
function by renaming `midx_contains_pack()` to `midx_locate_pack()`,
adding that output parameter, and then reimplementing
`midx_contains_pack()` in terms of it.
Future patches will make use of this new function.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a multi-pack bitmap is used to implement verbatim pack reuse (that
is, when verbatim chunks from an on-disk packfile are copied
directly[^1]), it does so by using its "preferred pack" as the source
for pack-reuse.
This allows repositories to pack the majority of their objects into a
single (often large) pack, and then use it as the single source for
verbatim pack reuse. This increases the amount of objects that are
reused verbatim (and consequently, decrease the amount of time it takes
to generate many packs). But this performance comes at a cost, which is
that the preferred packfile must pace its growth with that of the entire
repository in order to maintain the utility of verbatim pack reuse.
As repositories grow beyond what we can reasonably store in a single
packfile, the utility of verbatim pack reuse diminishes. Or, at the very
least, it becomes increasingly more expensive to maintain as the pack
grows larger and larger.
It would be beneficial to be able to perform this same optimization over
multiple packs, provided some modest constraints (most importantly, that
the set of packs eligible for verbatim reuse are disjoint with respect
to the subset of their objects being sent).
If we assume that the packs which we treat as candidates for verbatim
reuse are disjoint with respect to any of their objects we may output,
we need to make only modest modifications to the verbatim pack-reuse
code itself. Most notably, we need to remove the assumption that the
bits in the reachability bitmap corresponding to objects from the single
reuse pack begin at the first bit position.
Future patches will unwind these assumptions and reimplement their
existing functionality as special cases of the more general assumptions
(e.g. that reuse bits can start anywhere within the bitset, but happen
to start at 0 for all existing cases).
This patch does not yet relax any of those assumptions. Instead, it
implements a foundational data-structure, the "Bitampped Packs" (`BTMP`)
chunk of the multi-pack index. The `BTMP` chunk's contents are described
in detail here. Importantly, the `BTMP` chunk contains information to
map regions of a multi-pack index's reachability bitmap to the packs
whose objects they represent.
For now, this chunk is only written, not read (outside of the test-tool
used in this patch to test the new chunk's behavior). Future patches
will begin to make use of this new chunk.
[^1]: Modulo patching any `OFS_DELTA`'s that cross over a region of the
pack that wasn't used verbatim.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When selecting which packfiles will be written while generating a MIDX,
the MIDX internals fill out a 'struct pack_info' with various pieces of
book-keeping.
Instead of filling out each field of the `pack_info` structure
individually in each of the two spots that modify the array of such
structures (`ctx->info`), extract a common routine that does this for
us.
This reduces the code duplication by a modest amount. But more
importantly, it zero-initializes the structure before assigning values
into it. This hardens us for a future change which will add additional
fields to this structure which (until this patch) was not
zero-initialized.
As a result, any new fields added to the `pack_info` structure need only
be updated in a single location, instead of at each spot within midx.c.
There are no functional changes in this patch.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pack-objects internals use a packing_data struct to track what
objects are part of the pack(s) being formed.
Since these structures contain allocated fields, failing to
appropriately free() them results in a leak. Plug that leak by
introducing a clear_packing_data() function, and call it in the
appropriate spots.
This is a fairly straightforward leak to plug, since none of the callers
expect to read any values or have any references to parts of the address
space being freed.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph, midx, and pack idx on-disk formats all have oid fanout
tables which are fed to bsearch_hash(). If these tables do not increase
monotonically, then the binary search may not only produce bogus values,
it may cause out of bounds reads.
We fixed this for commit graphs in 4169d89645 (commit-graph: check
consistency of fanout table, 2023-10-09). That commit argued that we did
not need to do the same for midx and pack idx files, because they
already did this check. However, that is wrong. We _do_ check the fanout
table for pack idx files when we load them, but we only do so for midx
files when running "git multi-pack-index verify". So it is possible to
get an out-of-bounds read by running a normal command with a specially
crafted midx file.
Let's fix this using the same solution (and roughly the same test) we
did for the commit-graph in 4169d89645. This replaces the same check
from "multi-pack-index verify", because verify uses the same read
routines, we'd bail on reading the midx much sooner now. So let's make
sure to copy its verbose error message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we load a revindex from disk, we check the size of the file
compared to the number of objects we expect it to have. But when we use
a RIDX chunk stored directly in the midx, we just access the memory
directly. This can lead to out-of-bounds memory access for a corrupted
or malicious multi-pack-index file.
We can catch this by recording the RIDX chunk size, and then checking it
against the expected size when we "load" the revindex. Note that this
check is much simpler than the one that load_revindex_from_disk() does,
because we just have the data array with no header (so we do not need
to account for the header size, and nor do we need to bother validating
the header values).
The test confirms both that we catch this case, and that we continue the
process (the revindex is required to use the midx bitmaps, but we
fallback to a non-bitmap traversal).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we see a large offset bit in the regular midx offset table, we
use the entry as an index into a separate large offset table (just like
a pack idx does). But we don't bounds-check the access to that large
offset table (nor even record its size when we parse the chunk!).
The equivalent code for a regular pack idx is in check_pack_index_ptr().
But things are a bit simpler here because of the chunked format: we can
just check our array index directly.
As a bonus, we can get rid of the st_mult() here. If our array
bounds-check is successful, then we know that the result will fit in a
size_t (and the bounds check uses a division to avoid overflow
entirely).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The object offset chunk has one fixed-size entry for each object in the
midx. But since we don't check its size, we may access out-of-bounds
memory if we see a corrupt or malicious midx file.
Sine the entries are fixed-size, the total length can be known up-front,
and we can just check it while parsing the chunk (this is similar to
what we do when opening pack idx files, which contain a similar offset
table).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The midx reader assumes chunks are aligned to a 4-byte boundary: we
treat the fanout chunk as an array of uint32_t, indexing it to feed the
results to ntohl(). Without aligning the chunks, we may violate the
CPU's alignment constraints. Though many platforms allow this, some do
not. And certanily UBSan will complain, since it is undefined behavior.
Even though most chunks are naturally 4-byte-aligned (because they are
storing uint32_t or larger types), PNAM is not. It stores NUL-terminated
pack names, so you can have a valid chunk with any length. The writing
side handles this by 4-byte-aligning the chunk, introducing a few extra
NULs as necessary. But since we don't check this on the reading side, we
may end up with a misaligned fanout and trigger the undefined behavior.
We have two options here:
1. Swap out ntohl(fanout[i]) for get_be32(fanout+i) everywhere. The
latter handles alignment itself. It's possible that it's slightly
slower (though in practice I'm not sure how true that is,
especially for these code paths which then go on to do a binary
search).
2. Enforce the alignment when reading the chunks. This is easy to do,
since the table-of-contents reader can check it in one spot.
I went with the second option here, just because it places less burden
on maintenance going forward (it is OK to continue using ntohl), and we
know it can't have any performance impact on the actual reads.
The commit-graph code uses the same chunk API. It's usually also 4-byte
aligned, but some chunks are not (like Bloom filter BDAT chunks). So
we'll pass "1" here to allow any alignment. It doesn't suffer from the
same problem as midx with its fanout because the fanout chunk is always
the first (and the rest of the format dictates that the first chunk will
start aligned).
The new test shows the effect on a midx with a misaligned PNAM chunk.
Note that the midx-reading code treats chunk-toc errors as soft, falling
back to the non-midx path rather than calling die(), as we do for other
parsing errors. Arguably we should make all of these behave the same,
but that's out of scope for this patch. For now the test just expects
the fallback behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We parse the pack-name chunk as a series of NUL-terminated strings. But
since we don't look at the chunk size, there's nothing to guarantee that
we don't parse off the end of the chunk (or even off the end of the
mapped file).
We can record the length, and then as we parse make sure that we never
walk past it.
The new test exercises the case, though note that it does not actually
segfault before this patch. It hits a NUL byte somewhere in one of the
other chunks, and comes up with a garbage pack name. You could construct
one that reads out-of-bounds (e.g., a PNAM chunk at the end of file),
but this case is simple and sufficient to check that we detect the
problem.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reading an on-disk multi-pack-index, we take the number of objects
in the midx from the final value of the fanout table. But we just
blindly assume that the chunk containing the actual oid entries is the
correct size. This can lead to us reading out-of-bounds memory if the
lookup chunk is too small (or if the fanout is corrupted; when they
don't agree we cannot tell which one is wrong).
Note that we bump the assignment of m->num_objects into the fanout
parser callback, so that it's set when we parse the lookup table
(otherwise we'd have to manually record the lookup table size and check
it later).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we load the oid-fanout chunk, our callback checks that its size is
reasonable and returns an error if not. However, the caller only checks
our return value against CHUNK_NOT_FOUND, so we end up ignoring the
error completely! Using a too-small fanout table means we end up
accessing random memory for the fanout and segfault.
We can fix this by checking for any non-zero return value, rather than
just CHUNK_NOT_FOUND, and adjusting our error message to cover both
cases. We could handle each error code individually, but there's not
much point for such a rare case. The extra message produced in the
callback makes it clear what is going on.
The same pattern is used in the adjacent code. Those cases are actually
OK for now because they do not use a custom callback, so the only error
they can get is CHUNK_NOT_FOUND. But let's convert them, as this is an
accident waiting to happen (especially as we convert some of them away
from pair_chunk). The error messages are more verbose, but it should be
rare for a user to see these anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pair_chunk() function is provided as an easy helper for parsing
chunks that just want a pointer to a set of bytes. But every caller has
a hidden bug: because we return only the pointer without the matching
chunk size, the callers have no clue how many bytes they are allowed to
look at. And as a result, they may read off the end of the mmap'd data
when the on-disk file does not match their expectations.
Since chunk files are typically used for local-repository data like
commit-graph files and midx's, the security implications here are pretty
mild. The worst that can happen is that you hand somebody a corrupted
repository tarball, and running Git on it does an out-of-bounds read and
crashes. So it's worth being more defensive, but we don't need to drop
everything and fix every caller immediately.
I noticed the problem because the pair_chunk_fn() callback does not look
at its chunk_size argument, and wanted to annotate it to silence
-Wunused-parameter. We could do that now, but we'd lose the hint that
this code should be audited and fixed.
So instead, let's set ourselves up for going down that path:
1. Provide a pair_chunk() function that does return the size, which
prepares us for fixing these cases.
2. Rename the existing function to pair_chunk_unsafe(). That gives us
an easy way to grep for cases which still need to be fixed, and the
name should cause anybody adding new calls to think twice before
using it.
There are no callers of the "safe" version yet, but we'll add some in
subsequent patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various offset computation in the code that accesses the packfiles
and other data in the object layer has been hardened against
arithmetic overflow, especially on 32-bit systems.
* tb/object-access-overflow-protection:
commit-graph.c: prevent overflow in `verify_commit_graph()`
commit-graph.c: prevent overflow in `write_commit_graph()`
commit-graph.c: prevent overflow in `merge_commit_graph()`
commit-graph.c: prevent overflow in `split_graph_merge_strategy()`
commit-graph.c: prevent overflow in `load_tree_for_commit()`
commit-graph.c: prevent overflow in `fill_commit_in_graph()`
commit-graph.c: prevent overflow in `fill_commit_graph_info()`
commit-graph.c: prevent overflow in `load_oid_from_graph()`
commit-graph.c: prevent overflow in add_graph_to_chain()
commit-graph.c: prevent overflow in `write_commit_graph_file()`
pack-bitmap.c: ensure that eindex lookups don't overflow
midx.c: prevent overflow in `fill_included_packs_batch()`
midx.c: prevent overflow in `write_midx_internal()`
midx.c: store `nr`, `alloc` variables as `size_t`'s
midx.c: prevent overflow in `nth_midxed_offset()`
midx.c: prevent overflow in `nth_midxed_object_oid()`
midx.c: use `size_t`'s for fanout nr and alloc
packfile.c: use checked arithmetic in `nth_packed_object_offset()`
packfile.c: prevent overflow in `load_idx()`
packfile.c: prevent overflow in `nth_packed_object_id()`
In a similar spirit as in previous commits, avoid an integer overflow
when computing the expected size of a MIDX.
(Note that this is also OK as-is, since `p->pack_size` is an `off_t`, so
this computation should already be done as 64-bit integers. But again,
let's use `st_mult()` to make this fact clear).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing a MIDX, we use the chunk-format API to write out each
individual chunk of the MIDX. Each chunk of the MIDX is tracked via a
call to `add_chunk()`, along with the expected size of that chunk.
Guard against overflow when dealing with a MIDX with a large number of
entries (and consequently, large chunks within the MIDX file itself) to
avoid corrupting the contents of the MIDX itself.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the `write_midx_context` structure, we use two `uint32_t`'s to track
the length and allocated size of the packs, and one `uint32_t` to track
the number of objects in the MIDX.
In practice, having these be 32-bit unsigned values shouldn't cause any
problems since we are unlikely to have that many objects or packs in any
real-world repository. But these values should be `size_t`'s, so change
their type to reflect that.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar spirit as previous patches, avoid an overflow when looking
up object offsets in the MIDX's large offset table by guarding the
computation via `st_mult()`.
This instance is also OK as-is, since the left operand is the result of
`sizeof(...)`, which is already a `size_t`. But use `st_mult()` instead
here to make it explicit that this computation is to be performed using
64-bit unsigned integers.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a similar spirit as previous commits, avoid overflow when looking up
an object's OID in a MIDX when its position is greater than
`2^32-1/m->hash_len`.
As usual, it is perfectly OK for a MIDX to have as many as 2^32-1
objects (since we use 32-bit fields to count the number of objects at
each fanout layer). But if we have more than `2^32-1/m->hash_len` number
of objects, we will incorrectly perform the computation using 32-bit
integers, overflowing the result.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `midx_fanout` struct is used to keep track of a set of OIDs
corresponding to each layer of the MIDX's fanout table. It stores an
array of entries, along with the number of entries in the table, and the
allocated size of the array.
Both `nr` and `alloc` are stored as 32-bit unsigned integers. In
practice, this should never cause any problems, since most packs have
far fewer than 2^32-1 objects.
But storing these as `size_t`'s is more appropriate, and prevents us
from accidentally overflowing some result when multiplying or adding to
either of these values. Update these struct members to be `size_t`'s as
appropriate.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
alloc_nr, ALLOC_GROW, and ALLOC_GROW_BY are commonly used macros for
dynamic array allocation. Moving these macros to git-compat-util.h with
the other alloc macros focuses alloc.[ch] to allocation for Git objects
and additionally allows us to remove inclusions to alloc.h from files
that solely used the above macros.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The vast majority of files including object-store.h did not need dir.h
nor khash.h. Split the header into two files, and let most just depend
upon object-store-ll.h, while letting the two callers that need it
depend on the full object-store.h.
After this patch:
$ git grep -h include..object-store | sort | uniq -c
2 #include "object-store.h"
129 #include "object-store-ll.h"
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More header clean-up.
* en/header-split-cache-h-part-2: (22 commits)
reftable: ensure git-compat-util.h is the first (indirect) include
diff.h: reduce unnecessary includes
object-store.h: reduce unnecessary includes
commit.h: reduce unnecessary includes
fsmonitor: reduce includes of cache.h
cache.h: remove unnecessary headers
treewide: remove cache.h inclusion due to previous changes
cache,tree: move basic name compare functions from read-cache to tree
cache,tree: move cmp_cache_name_compare from tree.[ch] to read-cache.c
hash-ll.h: split out of hash.h to remove dependency on repository.h
tree-diff.c: move S_DIFFTREE_IFXMIN_NEQ define from cache.h
dir.h: move DTYPE defines from cache.h
versioncmp.h: move declarations for versioncmp.c functions from cache.h
ws.h: move declarations for ws.c functions from cache.h
match-trees.h: move declarations for match-trees.c functions from cache.h
pkt-line.h: move declarations for pkt-line.c functions from cache.h
base85.h: move declarations for base85.c functions from cache.h
copy.h: move declarations for copy.c functions from cache.h
server-info.h: move declarations for server-info.c functions from cache.h
packfile.h: move pack_window and pack_entry from cache.h
...
Geometric repacking ("git repack --geometric=<n>") in a repository
that borrows from an alternate object database had various corner
case bugs, which have been corrected.
* ps/fix-geom-repack-with-alternates:
repack: disable writing bitmaps when doing a local repack
repack: honor `-l` when calculating pack geometry
t/helper: allow chmtime to print verbosely without modifying mtime
pack-objects: extend test coverage of `--stdin-packs` with alternates
pack-objects: fix error when same packfile is included and excluded
pack-objects: fix error when packing same pack twice
pack-objects: split out `--stdin-packs` tests into separate file
repack: fix generating multi-pack-index with only non-local packs
repack: fix trying to use preferred pack in alternates
midx: fix segfault with no packs and invalid preferred pack
When asked to write a multi-pack-index the user can specify a preferred
pack that is used as a tie breaker when multiple packs contain the same
objects. When this packfile cannot be found, we just pick the first pack
that is getting tracked by the newly written multi-pack-index as a
fallback.
Picking the fallback can fail in the case where we're asked to write a
multi-pack-index with no packfiles at all: picking the fallback value
will cause a segfault as we blindly index into the array of packfiles,
which would be empty.
Fix this bug by resetting the preferred packfile index to `-1` before
searching for the preferred pack. This fixes the segfault as we already
check for whether the index is `> - 1`. If it is not, we simply don't
pick a preferred packfile at all.
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the change in the last commit to move several functions to
write-or-die.h, csum-file.h no longer needs to include cache.h.
However, removing that include forces several other C files, which
directly or indirectly dependend upon csum-file.h's inclusion of
cache.h, to now be more explicit about their dependencies.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is another step towards letting us remove the include of cache.h in
strbuf.c. It does mean that we also need to add includes of abspath.h
in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More work towards -Wunused.
* jk/unused-post-2.39-part2: (21 commits)
help: mark unused parameter in git_unknown_cmd_config()
run_processes_parallel: mark unused callback parameters
userformat_want_item(): mark unused parameter
for_each_commit_graft(): mark unused callback parameter
rewrite_parents(): mark unused callback parameter
fetch-pack: mark unused parameter in callback function
notes: mark unused callback parameters
prio-queue: mark unused parameters in comparison functions
for_each_object: mark unused callback parameters
list-objects: mark unused callback parameters
mark unused parameters in signal handlers
run-command: mark error routine parameters as unused
mark "pointless" data pointers in callbacks
ref-filter: mark unused callback parameters
http-backend: mark unused parameters in virtual functions
http-backend: mark argc/argv unused
object-name: mark unused parameters in disambiguate callbacks
serve: mark unused parameters in virtual functions
serve: use repository pointer to get config
ls-refs: drop config caching
...
The for_each_{loose,packed}_object interface uses callback functions,
but not every callback needs all of the parameters. Mark the unused ones
to satisfy -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to replace includes of cache.h with includes of the much
smaller alloc.h in many places. It does mean that we also need to add
includes of alloc.h in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A bugfix with tracing support in midx codepath
* tb/midx-bitmap-selection-fix:
pack-bitmap-write.c: instrument number of reused bitmaps
midx.c: instrument MIDX and bitmap generation with trace2 regions
midx.c: consider annotated tags during bitmap selection
midx.c: fix whitespace typo
When debugging MIDX and MIDX-bitmap related issues, it is useful to
figure out where Git is spending its time.
GitHub has been using the below trace2 regions to instrument various
components of generating a MIDX itself, as well time spent preparing to
build a MIDX bitmap.
These are limited to instrumenting the following functions:
- midx.c::find_commits_for_midx_bitmap()
- midx.c::midx_pack_order()
- midx.c::prepare_midx_packing_data()
- midx.c::write_midx_bitmap()
- midx.c::write_midx_internal()
- midx.c::write_midx_reverse_index()
to start and end with a trace2_region_enter() and trace2_region_leave(),
respectively.
The category for all of these is "midx", which matches the existing
convention. The region description matches the name of the function.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When generating a multi-pack bitmap without a `--refs-snapshot` (e.g.,
by running `git multi-pack-index write --bitmap` directly), we determine
the set of bitmap-able commits by enumerating each reference, and adding
the referrent as the tip of a reachability traversal when it appears
somewhere in the MIDX. (Any commit we encounter during the reachability
traversal then becomes a candidate for bitmap selection).
But we incorrectly avoid peeling the object at the tip of each
reference. So if we see some reference that points at an annotated tag
(which in turn points through zero or more additional annotated tags at
a commit), that we will not add it as a tip for the reachability
traversal. This means that if some commit C is only referenced through
one or more annotated tag(s), then C won't become a bitmap candidate.
Correct this by peeling the reference tips as we enumerate them to
ensure that we consider commits which are the targets of annotated tags,
in addition to commits which are referenced directly.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was unintentionally introduced via 893b563505 (midx: inline
nth_midxed_pack_entry(), 2021-09-11) where "struct repository *r"
became "struct repository * r".
The latter does not adhere to our usual style conventions, so fix that
up to look more like our usual declarations.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply similar treatment with respect to cruft packs as in a few commits
ago to `repack` with a non-zero `--batch-size`.
Since the case of a non-zero `--batch-size` is handled separately (in
`fill_included_packs_batch()` instead of `fill_included_packs_all()`), a
separate fix must be applied for this case.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fill_included_packs_batch() routine is responsible for aggregating
objects in packs with a non-zero value for the `--batch-size` option of
the `git multi-pack-index repack` sub-command.
Since this routine is explicitly called only when `--batch-size` is
non-zero, there is no point in checking that this is the case in our
loop condition.
Remove the unnecessary part of this condition to avoid confusion.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace a direct invocation of Git's `xcalloc()` wrapper with the
`CALLOC_ARRAY()` macro instead.
The latter is preferred since it is more conventional in Git's codebase,
but also because it automatically picks the correct value for the record
size.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `repack` sub-command of the `git multi-pack-index` builtin creates a
new pack aggregating smaller packs contained in the MIDX up to some
given `--batch-size`.
When `--batch-size=0`, this instructs the MIDX builtin to repack
everything contained in the MIDX into a single pack.
In similar spirit as a previous commit, it is undesirable to repack the
contents of a cruft pack in this step. Teach `repack` to ignore any
cruft pack(s) when `--batch-size=0` for the same reason(s).
(The case of a non-zero `--batch-size` will be handled in a subsequent
commit).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
