It is useful to see the full patch while resolving conflicts in a
rebase. The only way to do it now is
less .git/rebase-*/patch
which could turn out to be a lot longer to type if you are in a
linked worktree, or not at top-dir. On top of that, an ordinary user
should not need to peek into .git directory. The new option is
provided to examine the patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pointing the user to $GIT_DIR/rebase-apply may encourage them to mess
around in there, which is not a good thing. With this, the user does
not have to keep the path around somewhere (because after a couple of
commands, the path may be out of scrollback buffer) when they need to
look at the patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command allows to delete a worktree. Like 'move' you cannot
remove the main worktree, or one with submodules inside [1].
For deleting $GIT_WORK_TREE, Untracked files or any staged entries are
considered precious and therefore prevent removal by default. Ignored
files are not precious.
When it comes to deleting $GIT_DIR, there's no "clean" check because
there should not be any valuable data in there, except:
- HEAD reflog. There is nothing we can do about this until somebody
steps up and implements the ref graveyard.
- Detached HEAD. Technically it can still be recovered. Although it
may be nice to warn about orphan commits like 'git checkout' does.
[1] We do 'git status' with --ignore-submodules=all for safety
anyway. But this needs a closer look by submodule people before we
can allow deletion. For example, if a submodule is totally clean,
but its repo not absorbed to the main .git dir, then deleting
worktree also deletes the valuable .submodule repo too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command allows to relocate linked worktrees. Main worktree cannot
(yet) be moved.
There are two options to move the main worktree, but both have
complications, so it's not implemented yet. Anyway the options are:
- convert the main worktree to a linked one and move it away, leave
the git repository where it is. The repo essentially becomes bare
after this move.
- move the repository with the main worktree. The tricky part is make
sure all file descriptors to the repository are closed, or it may
fail on Windows.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --prune-tags option to git-fetch, along with fetch.pruneTags
config option and a -P shorthand (-p is --prune). This allows for
doing any of:
git fetch -p -P
git fetch --prune --prune-tags
git fetch -p -P origin
git fetch --prune --prune-tags origin
Or simply:
git config fetch.prune true &&
git config fetch.pruneTags true &&
git fetch
Instead of the much more verbose:
git fetch --prune origin 'refs/tags/*:refs/tags/*' '+refs/heads/*:refs/remotes/origin/*'
Before this feature it was painful to support the use-case of pulling
from a repo which is having both its branches *and* tags deleted
regularly, and have our local references to reflect upstream.
At work we create deployment tags in the repo for each rollout, and
there's *lots* of those, so they're archived within weeks for
performance reasons.
Without this change it's hard to centrally configure such repos in
/etc/gitconfig (on servers that are only used for working with
them). You need to set fetch.prune=true globally, and then for each
repo:
git -C {} config --replace-all remote.origin.fetch "refs/tags/*:refs/tags/*" "^\+*refs/tags/\*:refs/tags/\*$"
Now I can simply set fetch.pruneTags=true in /etc/gitconfig as well,
and users running "git pull" will automatically get the pruning
semantics I want.
Even though "git remote" has corresponding "prune" and "update
--prune" subcommands I'm intentionally not adding a corresponding
prune-tags or "update --prune --prune-tags" mode to that command.
It's advertised (as noted in my recent "git remote doc: correct
dangerous lies about what prune does") as only modifying remote
tracking references, whereas any --prune-tags option is always going
to modify what from the user's perspective is a local copy of the tag,
since there's no such thing as a remote tracking tag.
Ideally add_prune_tags_to_fetch_refspec() would be something that
would use ALLOC_GROW() to grow the 'fetch` member of the 'remote'
struct. Instead I'm realloc-ing remote->fetch and adding the
tag_refspec to the end.
The reason is that parse_{fetch,push}_refspec which allocate the
refspec (ultimately remote->fetch) struct are called many places that
don't have access to a 'remote' struct. It would be hard to change all
their callsites to be amenable to carry around the bookkeeping
variables required for dynamic allocation.
All the other callers of the API first incrementally construct the
string version of the refspec in remote->fetch_refspec via
add_fetch_refspec(), before finally calling parse_fetch_refspec() via
some variation of remote_get().
It's less of a pain to deal with the one special case that needs to
modify already constructed refspecs than to chase down and change all
the other callsites. The API I'm adding is intentionally not
generalized because if we add more of these we'd probably want to
re-visit how this is done.
See my "Re: [BUG] git remote prune removes local tags, depending on
fetch config" (87po6ahx87.fsf@evledraar.gmail.com;
https://public-inbox.org/git/87po6ahx87.fsf@evledraar.gmail.com/) for
more background info.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options for "worktree add" are:
--checkout
--guess-remote
--lock
--track
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--color
--format=
--ignore-case
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are --null and --show-stash.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable option is --gpg-sign
In-progress options like --continue will be part of --git-completion-helper
then filtered out by _git_revert() unless the operation is in
progress. This helps keep marking of these operations in just one place.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--intent-to-add
--quiet
--recurse-submodules
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is really nice. Since pull_options[] already declares all
passthru options to 'merge' or 'fetch', a single
git pull --git-completion-helper
would provide all completable options (--no- variants are a separate
issue). Dead shell variables can now be deleted.
New completable options are:
--allow-unrelated-histories
--ipv4
--ipv6
--jobs
--refmap=
--signoff
--strategy-option=
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--allow-empty (notes add and notes append)
--for-rewrite= (notes copy)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New completable options are:
--allow-unrelated-histories
--message=
--overwrite-ignore
--signoff
--strategy-option=
--summary
--verify
The variable $__git_merge_options remains because _git_pull() still
needs it. It will soon be gone after _git_pull() is updated.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are --quiet and --upload-pack=.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable option is --separate-git-dir=.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--connectivity-only
--dangling
--progress
--reflogs
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New completable options:
--deepen=
--ipv4
--ipv6
--jobs=
--multiple
--progress
--refmap=
--shallow-exclude=
--shallow-since=
--update-head-ok
Since _git_pull() needs fetch options too, $__git_fetch_options
remains. This variable will soon be gone after _git_pull() is updated.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we can't automatically extract diff options for completion yet,
difftool will take all options from $__git_diff_common_options. This
brings _a lot_ more completable options to difftool.
--ignore-submodules is added to $__git_diff_common_options to avoid
regression in difftool. But it's a good thing anyway even for other
diff commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new comletable options are:
--branch
--gpg-sign
--long
--no-post-rewrite
--null
--porcelain
--status
--allow-empty is no longer completable because it's a hidden option
since 4741edd549 (Remove deprecated OPTION_BOOLEAN for parsing arguments
- 2013-08-03)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are --exclude and --interactive
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--allow-empty
--allow-empty-message
--ff
--gpg-sign
--keep-redundant-commits
--strategy-option
In-progress options like --continue will be part of --git-completion-helper
then filtered out by _git_cherry_pick() unless the operation is in
progress. This helps keep marking of these operations in just one place.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--ignore-other-worktrees
--progress
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--3way
--allow-overlap
--build-fake-ancestor=
--directory
--exclude
--include
--index-info is no longer completable but that's because it's renamed to
--build-fake-ancestor in 26b2800768 (apply: get rid of --index-info in
favor of --build-fake-ancestor - 2007-09-17)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are:
--directory
--exclude
--gpg-sign
--include
--keep-cr
--keep-non-patch
--message-id
--no-keep-cr
--patch-format
--quiet
--reject
--resolvemsg=
In-progress options like --continue will be part of --git-completion-helper
then filtered out by _git_am() unless the operation is in progress. This
helps keep marking of these operations in just one place.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new completable options are
--all
--ignore-missing
--ignore-removal
--renormalize
--verbose
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a __gitcomp wrapper that will execute
git ... --git-completion-helper
to get the list of completable options. The call will be made only
once and cached to avoid performance issues, especially on Windows.
__gitcomp_builtin() allows callers to change its output a bit by adding
some more options, or removing some.
- Current --git-completion-helper for example does not output --no-foo
form, this has to be added manually by __gitcomp_builtin() callers
when necessary
- Some options from --git-completion-helper should only be available in
certain conditions (e.g. --continue and friends). __gitcomp_builtin()
callers can remove them if the conditions are not met.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
353d84c537 (coccicheck: make transformation for strbuf_addf(sb, "...")
more precise) added a check to avoid transforming calls with format
strings which contain percent signs, as that would change the result.
It uses embedded Python code for that. Simplify this rule by using the
regular expression matching operator instead.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The anchor string "Available strategies are:" is translatable so
__git_list_merge_strategies may fail to collect available strategies
from 'git merge' on non-C locales. Force C locale on this command.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's a rule in strbuf.cocci for converting trivial uses of
strbuf_addf() to strbuf_addstr() in order to simplify the code and
improve performance a bit. Coccinelle 1.0.0~rc19.deb-3 on Travis CI
lets the "%s" in that rule match format strings like "%d" as well for
some reason, though, leading to invalid proposed patches.
Use the "format" keyword to let Coccinelle parse the format string and
match the conversion specifier with a trivial regular expression
instead. This works fine with both Coccinelle 1.0.0~rc19.deb-3 and
1.0.4.deb-3+b3 (the current version on Debian testing).
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Tested-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the shell prompt script (in contrib/) to strip trailing CR
from strings read from various "state" files.
* ra/prompt-eread-fix:
git-prompt: fix reading files with windows line endings
git-prompt: make __git_eread intended use explicit
Replace the perl/Makefile.PL and the fallback perl/Makefile used under
NO_PERL_MAKEMAKER=NoThanks with a much simpler implementation heavily
inspired by how the i18n infrastructure's build process works[1].
The reason for having the Makefile.PL in the first place is that it
was initially[2] building a perl C binding to interface with libgit,
this functionality, that was removed[3] before Git.pm ever made it to
the master branch.
We've since since started maintaining a fallback perl/Makefile, as
MakeMaker wouldn't work on some platforms[4]. That's just the tip of
the iceberg. We have the PM.stamp hack in the top-level Makefile[5] to
detect whether we need to regenerate the perl/perl.mak, which I fixed
just recently to deal with issues like the perl version changing from
under us[6].
There is absolutely no reason for why this needs to be so complex
anymore. All we're getting out of this elaborate Rube Goldberg machine
was copying perl/* to perl/blib/* as we do a string-replacement on
the *.pm files to hardcode @@LOCALEDIR@@ in the source, as well as
pod2man-ing Git.pm & friends.
So replace the whole thing with something that's pretty much a copy of
how we generate po/build/**.mo from po/*.po, just with a small sed(1)
command instead of msgfmt. As that's being done rename the files
from *.pm to *.pmc just to indicate that they're generated (see
"perldoc -f require").
While I'm at it, change the fallback for Error.pm from being something
where we'll ship our own Error.pm if one doesn't exist at build time
to one where we just use a Git::Error wrapper that'll always prefer
the system-wide Error.pm, only falling back to our own copy if it
really doesn't exist at runtime. It's now shipped as
Git::FromCPAN::Error, making it easy to add other modules to
Git::FromCPAN::* in the future if that's needed.
Functional changes:
* This will not always install into perl's idea of its global
"installsitelib". This only potentially matters for packagers that
need to expose Git.pm for non-git use, and as explained in the
INSTALL file there's a trivial workaround.
* The scripts themselves will 'use lib' the target directory, but if
INSTLIBDIR is set it overrides it. It doesn't have to be this way,
it could be set in addition to INSTLIBDIR, but my reading of [7] is
that this is the desired behavior.
* We don't build man pages for all of the perl modules as we used to,
only Git(3pm). As discussed on-list[8] that we were building
installed manpages for purely internal APIs like Git::I18N or
private-Error.pm was always a bug anyway, and all the Git::SVN::*
ones say they're internal APIs.
There are apparently external users of Git.pm, but I don't expect
there to be any of the others.
As a side-effect of these general changes the perl documentation
now only installed by install-{doc,man}, not a mere "install" as
before.
1. 5e9637c629 ("i18n: add infrastructure for translating Git with
gettext", 2011-11-18)
2. b1edc53d06 ("Introduce Git.pm (v4)", 2006-06-24)
3. 18b0fc1ce1 ("Git.pm: Kill Git.xs for now", 2006-09-23)
4. f848718a69 ("Make perl/ build procedure ActiveState friendly.",
2006-12-04)
5. ee9be06770 ("perl: detect new files in MakeMaker builds",
2012-07-27)
6. c59c4939c2 ("perl: regenerate perl.mak if perl -V changes",
2017-03-29)
7. 0386dd37b1 ("Makefile: add PERLLIB_EXTRA variable that adds to
default perl path", 2013-11-15)
8. 87bmjjv1pu.fsf@evledraar.booking.com ("Re: [PATCH] Makefile:
replace perl/Makefile.PL with simple make rules"
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If any of the files read by __git_eread have \r\n line endings, read
will only strip \n, leaving \r. This results in an ugly prompt, where
instead of
user@pc MINGW64 /path/to/repo (BARE:master)
the last parenthesis is printed over the beginning of the prompt like
)ser@pc MINGW64 /path/to/repo (BARE:master
This patch fixes the issue by changing the internal field separator
variable IFS to $'\r\n' before using the read builtin command.
Note that ANSI-C Quoting/POSIX Quoting ($'...') is supported by bash
as well as zsh, which are the current targets of git-prompt, cf.
contrib/completion/git-prompt.sh.
Signed-off-by: Robert Abel <rabel@robertabel.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_eread is used to read a single line of a given file (if it exists)
into a single variable stripping the EOL.
This patch removes the unused capability to split file contents into tokens
by passing multiple variable names. Add a comment and explicitly use $2
instead of misleading $@ as argument to the read builtin command.
Signed-off-by: Robert Abel <rabel@robertabel.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell completion (in contrib/) learned that "git pull" can take
the "--autostash" option.
* ac/complete-pull-autostash:
completion: add --autostash and --no-autostash to pull
Command line completion (in contrib/) has been taught about the
"--copy" option of "git branch".
* tz/complete-branch-copy:
completion: add '--copy' option to 'git branch'
Teach "sendemail.tocmd" to places that know about "sendemail.to",
like documentation and shell completion (in contrib/).
* rv/sendemail-tocmd-in-config-and-completion:
completion: add git config sendemail.tocmd
Documentation/config: add sendemail.tocmd to list preceding "See git-send-email(1)"
The "diff" family of commands learned to ignore differences in
carriage return at the end of line.
* jc/ignore-cr-at-eol:
diff: --ignore-cr-at-eol
xdiff: reassign xpparm_t.flags bits
Ideally we should only autocomplete if pull has --rebase since
they only work with it but could not figure out how to do that
and the error message of doing git pull --autostash points out
that you need --rebase so i guess it's good enough
Signed-off-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the mailing address of FSF to a URL, as FSF prefers.
* tz/fsf-address-update:
Replace Free Software Foundation address in license notices
Replace Free Software Foundation address in license notices
Let's make it clear how patches should flow into
contrib/git-jump. The normal Git maintainer does not
necessarily care about things in contrib/, and authors of
individual components should be the ones giving the final
review/ack for a patch. Ditto for bug reports, which are
likely to get more attention from the area expert.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the configuration option "jump.grepCmd" that allows to configure the
command that is used to search in grep mode. This allows the users of
git-jump to use ag(1) or ack(1) as search engines.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 52d59cc645 (branch: add a --copy (-c) option to go with --move (-m),
2017-06-18), `git branch` learned a `--copy` option. Include it when
providing command completions.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The remote-helper for talking to MediaWiki has been updated to
work with mediawiki namespaces.
* ab/mediawiki-namespace:
remote-mediawiki: show progress while fetching namespaces
remote-mediawiki: process namespaces in order
remote-mediawiki: support fetching from (Main) namespace
remote-mediawiki: skip virtual namespaces
remote-mediawiki: show known namespace choices on failure
remote-mediawiki: allow fetching namespaces with spaces
remote-mediawiki: add namespace support
The remote-helper for talking to MediaWiki has been updated to
truncate an overlong pagename so that ".mw" suffix can still be
added.
* ab/mediawiki-name-truncation:
remote-mediawiki: limit filenames to legal
The credential helper for libsecret (in contrib/) has been improved
to allow possibly prompting the end user to unlock secrets that are
currently locked (otherwise the secrets may not be loaded).
* dk/libsecret-unlock-to-load-fix:
credential-libsecret: unlock locked secrets
The credential helper for libsecret (in contrib/) has been improved
to allow possibly prompting the end user to unlock secrets that are
currently locked (otherwise the secrets may not be loaded).
* dk/libsecret-unlock-to-load-fix:
credential-libsecret: unlock locked secrets
The mailing address for the FSF has changed over the years. Rather than
updating the address across all files, refer readers to gnu.org, as the
GNU GPL documentation now suggests for license notices. The mailing
address is retained in the full license files (COPYING and LGPL-2.1).
The old address is still present in t/diff-lib/COPYING. This is
intentional, as the file is used in tests and the contents are not
expected to change.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this, the fetch process seems hanged while we fetch page
listings across the namespaces. Obviously, it should be possible to
silence this with -q, but that's an issue already present everywhere
in the code and should be fixed separately:
https://github.com/Git-Mediawiki/Git-Mediawiki/issues/30
Signed-off-by: Antoine Beaupré <anarcat@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ideally, we'd process them in numeric order since that is more
logical, but we can't do that yet since this is where we find the
numeric identifiers in the first place. Lexicographic order is a good
compromise.
Signed-off-by: Antoine Beaupré <anarcat@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we specify a list of namespaces to fetch from, by default the MW
API will not fetch from the default namespace, refered to as "(Main)"
in the documentation:
https://www.mediawiki.org/wiki/Manual:Namespace#Built-in_namespaces
I haven't found a way to address that "(Main)" namespace when getting
the namespace ids: indeed, when listing namespaces, there is no
"canonical" field for the main namespace, although there is a "*"
field that is set to "" (empty). So in theory, we could specify the
empty namespace to get the main namespace, but that would make
specifying namespaces harder for the user: we would need to teach
users about the "empty" default namespace. It would also make the code
more complicated: we'd need to parse quotes in the configuration.
So we simply override the query here and allow the user to specify
"(Main)" since that is the publicly documented name.
Signed-off-by: Antoine Beaupré <anarcat@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Virtual namespaces do not correspond to pages in the database and are
automatically generated by MediaWiki. It makes little sense,
therefore, to fetch pages from those namespaces and the MW API doesn't
support listing those pages.
According to the documentation, those virtual namespaces are currently
"Special" (-1) and "Media" (-2) but we treat all negative namespaces
as "virtual" as a future-proofing mechanism.
Signed-off-by: Antoine Beaupré <anarcat@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we fail to find a requested namespace, we should tell the user
which ones we know about, since those were already fetched. This
allows users to fetch all namespaces by specifying a dummy namespace,
failing, then copying the list of namespaces in the config.
Eventually, we should have a flag that allows fetching all namespaces
automatically.
Reviewed-by: Antoine Beaupré <anarcat@debian.org>
Signed-off-by: Antoine Beaupré <anarcat@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new option --ignore-cr-at-eol tells the diff machinery to treat a
carriage-return at the end of a (complete) line as if it does not
exist.
Just like other "--ignore-*" options to ignore various kinds of
whitespace differences, this will help reviewing the real changes
you made without getting distracted by spurious CRLF<->LF conversion
made by your editor program.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
[jch: squashed in command line completion by Dscho]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
we still want to use spaces as separators in the config, but we should
allow the user to specify namespaces with spaces, so we use underscore
for this.
Reviewed-by: Antoine Beaupré <anarcat@debian.org>
Signed-off-by: Antoine Beaupré <anarcat@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a new remote.origin.namespaces argument that is a
space-separated list of namespaces. The list of pages extract is then
taken from all the specified namespaces.
Reviewed-by: Antoine Beaupré <anarcat@debian.org>
Signed-off-by: Antoine Beaupré <anarcat@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A hook script that is set unexecutable is simply ignored. Git
notifies when such a file is ignored, unless the message is
squelched via advice.ignoredHook configuration.
* dm/run-command-ignored-hook-advise:
run-command: add hint when a hook is ignored
Credentials exposed by the secret service DBUS interface may be locked.
Setting the SECRET_SEARCH_UNLOCK flag will make the secret service
unlock these secrets, possibly prompting the user for credentials to do
so. Without this flag, the secret is simply not loaded.
Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Empty (length 0) usernames and/or passwords, when saved in the Windows
Credential Manager, come back as null when reading the credential.
One use case for such empty credentials is with NTLM authentication, where
empty username and password instruct libcurl to authenticate using the
credentials of the currently logged-on user (single sign-on).
When locating the relevant credentials, make empty username match null.
When outputting the credentials, handle nulls correctly.
Signed-off-by: Jakub Bereżański <kuba@berezanscy.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mediawiki pages can have names longer than NAME_MAX (generally 255)
characters, which will fail on checkout. we simply strip out extra
characters, which may mean one page's content will overwrite another
(the last editing winning).
ideally, we would do a more clever system to find unique names, but
that would be more difficult and error prone for a situation that
should rarely happen in the first place.
Signed-off-by: Antoine Beaupré <anarcat@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the commits 1fc458d9 (builtin/checkout: add --recurse-submodules
switch, 2017-03-14), 08d595dc (checkout: add --ignore-skip-worktree-bits
in sparse checkout mode, 2013-04-13) and 32669671 (checkout: introduce
--detach synonym for "git checkout foo^{commit}", 2011-02-08) checkout
gained new flags but the completion was not updated, although these flags
are useful completions. Add them.
The flags --force and --ignore-other-worktrees are not added as they are
potentially dangerous.
The flags --progress and --no-progress are only useful for scripting and are
therefore also not included.
Signed-off-by: Thomas Braun <thomas.braun@virtuell-zuhause.de>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an hook is present but the file is not set as executable then git will
ignore the hook.
For now this is silent which can be confusing.
This commit adds this warning to improve the situation:
hint: The 'pre-commit' hook was ignored because it's not set as executable.
hint: You can disable this warning with `git config advice.ignoredHook false`
To allow the old use-case of enabling/disabling hooks via the executable flag a
new setting is introduced: advice.ignoredHook.
Signed-off-by: Damien Marié <damien@dam.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the flags for broken and dirty were implemented in
b0176ce6b5 (builtin/describe: introduce --broken flag, 2017-03-21)
and 9f67d2e827 (Teach "git describe" --dirty option, 2009-10-21)
the completion was not updated, although these flags are useful
completions. Add them.
Signed-off-by: Thomas Braun <thomas.braun@virtuell-zuhause.de>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Transformations that hide multiplications can end up with an pair of
parentheses that is no longer needed. E.g. with a rule like this:
@@
expression E;
@@
- E * 2
+ double(E)
... we might get a patch like this:
- x = (a + b) * 2;
+ x = double((a + b));
Add a pair of parentheses to the preimage side of such rules.
Coccinelle will generate patches that remove them if they are present,
and it will still match expressions that lack them.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Message and doc updates.
* ma/up-to-date:
treewide: correct several "up-to-date" to "up to date"
Documentation/user-manual: update outdated example output
Now that `make` produces a file, we should have a clean target to remove
it.
Signed-off-by: Daniel Watkins <daniel@daniel-watkins.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow the Oxford style, which says to use "up-to-date" before the noun,
but "up to date" after it. Don't change plumbing (specifically
send-pack.c, but transport.c (git push) also has the same string).
This was produced by grepping for "up-to-date" and "up to date". It
turned out we only had to edit in one direction, removing the hyphens.
Fix a typo in Documentation/git-diff-index.txt while we're there.
Reported-by: Jeffrey Manian <jeffrey.manian@gmail.com>
Reported-by: STEVEN WHITE <stevencharleswhitevoices@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git contacts" (in contrib/) now lists the address on the
"Reported-by:" trailer to its output, in addition to those on
S-o-b: and other trailers, to make it easier to notify (and thank)
the original bug reporter.
* eb/contacts-reported-by:
git-contacts: also recognise "Reported-by:"
The "rerere-train" script (in contrib/) learned the "--overwrite"
option to allow overwriting existing recorded resolutions.
* rg/rerere-train-overwrite:
contrib/rerere-train: optionally overwrite existing resolutions
It's nice to cc someone that reported a bug, in order to let them
know that a fix is being considered, and possibly even get their
help in reviewing/testing the patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide the user an option to overwrite existing resolutions using an
`--overwrite` flag. This might be used, for example, if the user knows
that they already have an entry in their rerere cache for a conflict,
but wish to drop it and retrain based on the merge commit(s) passed to
the rerere-train script.
Signed-off-by: Raman Gupta <rocketraman@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to COPY_ARRAY (introduced in 60566cbb58), add a safe and
convenient helper for moving potentially overlapping ranges of array
entries. It infers the element size, multiplies automatically and
safely to get the size in bytes, does a basic type safety check by
comparing element sizes and unlike memmove(3) it supports NULL
pointers iff 0 elements are to be moved.
Also add a semantic patch to demonstrate the helper's intended usage.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Makefile rule in contrib/subtree for building documentation
learned to honour USE_ASCIIDOCTOR just like the main documentation
set does.
* aw/contrib-subtree-doc-asciidoctor:
subtree: honour USE_ASCIIDOCTOR when set
"git send-email" learned to overcome some SMTP server limitation
that does not allow many pieces of e-mails to be sent over a single
session.
* xz/send-email-batch-size:
send-email: --batch-size to work around some SMTP server limit
The Makefile rule in contrib/subtree for building documentation
learned to honour USE_ASCIIDOCTOR just like the main documentation
set does.
* aw/contrib-subtree-doc-asciidoctor:
subtree: honour USE_ASCIIDOCTOR when set
Some email servers (e.g. smtp.163.com) limit the number emails to be
sent per session (connection) and this will lead to a faliure when
sending many messages.
Teach send-email to disconnect after sending a number of messages
(configurable via the --batch-size=<num> option), wait for a few
seconds (configurable via the --relogin-delay=<seconds> option) and
reconnect, to work around such a limit.
Also add two configuration variables to give these options the default.
Note:
We will use this as a band-aid for now, but in the longer term, we
should look at and react to the SMTP error code from the server;
Xianqiang reports that 450 and 451 are returned by problematic
servers.
cf. https://public-inbox.org/git/7993e188.d18d.15c3560bcaf.Coremail.zxq_yx_007@163.com/
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two rules for using FREE_AND_NULL in free.cocci, one for
pointer types and one for expressions. Both cause coccinelle to remove
empty lines and even newline characters between replacements for some
reason; consecutive "free(x);/x=NULL;" sequences end up as multiple
FREE_AND_NULL calls on the same time.
Remove the type rule, as the expression rule already covers it, and
rearrange the lines of the latter to place the addition of FREE_AND_NULL
between the removals, which causes coccinelle to leave surrounding
whitespace untouched.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Defining USE_ASCIIDOCTOR=1 when building Git uses asciidoctor over
asciidoc when generating DocBook and man page documentation. However,
the contrib/subtree module does not presently honour that flag.
This causes a build failure when asciidoc is not present on the build
system. Instead, adapt the main Documentation/Makefile logic to use
asciidoctor when requested.
Signed-off-by: A. Wilcox <AWilcox@Wilcox-Tech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common pattern to free a piece of memory and assign NULL to the
pointer that used to point at it has been replaced with a new
FREE_AND_NULL() macro.
* ab/free-and-null:
*.[ch] refactoring: make use of the FREE_AND_NULL() macro
coccinelle: make use of the "expression" FREE_AND_NULL() rule
coccinelle: add a rule to make "expression" code use FREE_AND_NULL()
coccinelle: make use of the "type" FREE_AND_NULL() rule
coccinelle: add a rule to make "type" code use FREE_AND_NULL()
git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
The 'diff-highlight' program (in contrib/) has been restructured
for easier reuse by an external project 'diff-so-fancy'.
* jk/diff-highlight-module:
diff-highlight: split code into module
A follow-up to the existing "type" rule added in an earlier
change. This catches some occurrences that are missed by the previous
rule.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff-so-fancy project is also written in perl, and most
of its users pipe diffs through both diff-highlight and
diff-so-fancy. It would be nice if this could be done in a
single script. So let's pull most of diff-highlight's code
into its own module which can be used by diff-so-fancy.
In addition, we'll abstract a few basic items like reading
from stdio so that a script using the module can do more
processing before or after diff-highlight handles the lines.
See the README update for more details.
One small downside is that the diff-highlight script must
now be built using the Makefile. There are ways around this,
but it quickly gets into perl arcana. Let's go with the
simple solution. As a bonus, our Makefile now respects the
PERL_PATH variable if it is set.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interaction of "url.*.insteadOf" and custom URL scheme's
whitelisting is now documented better.
* jk/url-insteadof-config:
docs/config: mention protocol implications of url.insteadOf
The interaction of "url.*.insteadOf" and custom URL scheme's
whitelisting is now documented better.
* jk/url-insteadof-config:
docs/config: mention protocol implications of url.insteadOf
Add missing completions for git config advice:
* advice.amWorkDir
* advice.pushAlreadyExists
* advice.pushFetchFirst
* advice.pushNeedsForce
* advice.pushNonFFCurrent
* advice.pushNonFFMatching
* advice.pushUpdateRejected
* advice.rmHints
* advice.statusUoption
Remove completion for git config advice.pushNonFastForward,
since it was renamed to pushUpdateRejected in 1184564eac.
The config still works, but is no longer part of the documentation.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing completions for git config core:
* core.checkStat
* core.commentChar
* core.hideDotFiles
* core.hooksPath
* core.packedRefsTimeout
* core.precomposeUnicode
* core.protectHFS
* core.protectNTFS
* core.splitIndex
* core.sshCommand
Note that some configs are only used for some platforms
(hideDotFiles on Windows and precomposeUnicode on Mac).
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a URL rewrite switches the protocol to something
nonstandard (like "persistent-https" for "https"), the user
may be bitten by the fact that the default protocol
restrictions are different between the two. Let's drop a
note in insteadOf that points the user in the right
direction.
It would be nice if we could make this work out of the box,
but we can't without knowing the security implications of
the user's rewrite. Only the documentation for a particular
remote helper can advise one way or the other. Since we do
include the persistent-https helper in contrib/ (and since
it was the helper in the real-world case that inspired that
patch), let's also drop a note there.
Suggested-by: Elliott Cable <me@ell.io>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure our tests would pass when the sources are checked out
with "platform native" line ending convention by default on
Windows. Some "text" files out tests use and the test scripts
themselves that are meant to be run with /bin/sh, ought to be
checked out with eol=LF even on Windows.
* js/eol-on-ourselves:
t4051: mark supporting files as requiring LF-only line endings
Fix the remaining tests that failed with core.autocrlf=true
t3901: move supporting files into t/t3901/
completion: mark bash script as LF-only
git-new-workdir: mark script as LF-only
Fix build with core.autocrlf=true
When introducing git stash push in f5727e26e4 ("stash: introduce push
verb", 2017-02-19), I forgot to add it to the completion code. Add it
now.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone" learned the "--no-tags" option not to fetch all tags
initially, and also set up the tagopt not to follow any tags in
subsequent fetches.
* ab/clone-no-tags:
tests: rename a test having to do with shallow submodules
clone: add a --no-tags option to clone without tags
tests: change "cd ... && git fetch" to "cd &&\n\tgit fetch"
The colors in which "git status --short --branch" showed the names
of the current branch and its remote-tracking branch are now
configurable.
* sk/status-short-branch-color-config:
status: add color config slots for branch info in "--short --branch"
status: fix missing newline when comment chars are disabled
Without this change, the completion script does not work, as Bash expects
its scripts to have line feeds as end-of-line markers (this is
particularly prominent in quoted multi-line strings, where carriage
returns would slip into the strings as verbatim characters otherwise).
This change is required to let t9902-completion pass when Git's source
code is checked out with `core.autocrlf = true`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bash does not handle scripts with CR/LF line endings correctly, therefore
they *have* to be forced to LF-only line endings.
Funnily enough, this fixes t3000-ls-files-others and
t1021-rerere-in-workdir when git.git was checked out with
core.autocrlf=true, as these test still use git-new-workdir (once `git
worktree` is no longer marked as experimental, both scripts probably
want to be ported to using that command instead).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Completion for "git checkout <branch>" that auto-creates the branch
out of a remote tracking branch can now be disabled, as this
completion often gets in the way when completing to checkout an
existing local branch that happens to share the same prefix with
bunch of remote tracking branches.
* jk/complete-checkout-sans-dwim-remote:
completion: optionally disable checkout DWIM
Add a --no-tags option to clone without fetching any tags.
Without this change there's no easy way to clone a repository without
also fetching its tags.
When supplying --single-branch the primary remote branch will be
cloned, but in addition tags will be followed & retrieved. Now
--no-tags can be added --single-branch to clone a repository without
tags, and which only tracks a single upstream branch.
This option works without --single-branch as well, and will do a
normal clone but not fetch any tags.
Many git commands pay some fixed overhead as a function of the number
of references. E.g. creating ~40k tags in linux.git will cause a
command like `git log -1 >/dev/null` to run in over a second instead
of in a matter of milliseconds, in addition numerous other things will
slow down, e.g. "git log <TAB>" with the bash completion will slowly
show ~40k references instead of 1.
The user might want to avoid all of that overhead to simply use a
repository like that to browse the "master" branch, or something like
a CI tool might want to keep that one branch up-to-date without caring
about any other references.
Without this change the only way of accomplishing this was either by
manually tweaking the config in a fresh repository:
git init git &&
cat >git/.git/config <<EOF &&
[remote "origin"]
url = git@github.com:git/git.git
tagOpt = --no-tags
fetch = +refs/heads/master:refs/remotes/origin/master
[branch "master"]
remote = origin
merge = refs/heads/master
EOF
cd git &&
git pull
Which requires hardcoding the "master" name, which may not be the main
--single-branch would have retrieved, or alternatively by setting
tagOpt=--no-tags right after cloning & deleting any existing tags:
git clone --single-branch git@github.com:git/git.git &&
cd git &&
git config remote.origin.tagOpt --no-tags &&
git tag -l | xargs git tag -d
Which of course was also subtly buggy if --branch was pointed at a
tag, leaving the user in a detached head:
git clone --single-branch --branch v2.12.0 git@github.com:git/git.git &&
cd git &&
git config remote.origin.tagOpt --no-tags &&
git tag -l | xargs git tag -d
Now all this complexity becomes the much simpler:
git clone --single-branch --no-tags git@github.com:git/git.git
Or in the case of cloning a single tag "branch":
git clone --single-branch --branch v2.12.0 --no-tags git@github.com:git/git.git
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add color config slots to be used in the status short-format when
displaying local and remote tracking branch information.
[jc: rebased on top of Peff's fix to 'git status' and tweaked the
test to check both local and remote-tracking branch output]
Signed-off-by: Stephen Kent <smkent@smkent.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we complete branch names for "git checkout", we also
complete remote branch names that could trigger the DWIM
behavior. Depending on your workflow and project, this can
be either convenient or annoying.
For instance, my clone of gitster.git contains 74 local
"jk/*" branches, but origin contains another 147. When I
want to checkout a local branch but can't quite remember the
name, tab completion shows me 251 entries. And worse, for a
topic that has been picked up for pu, the upstream branch
name is likely to be similar to mine, leading to a high
probability that I pick the wrong one and accidentally
create a new branch.
This patch adds a way for the user to tell the completion
code not to include DWIM suggestions for checkout. This can
already be done by typing:
git checkout --no-guess jk/<TAB>
but that's rather cumbersome. The downside, of course, is
that you no longer get completion support when you _do_ want
to invoke the DWIM behavior. But depending on your workflow,
that may not be a big loss (for instance, in git.git I am
much more likely to want to detach, so I'd type "git
checkout origin/jk/<TAB>" anyway).
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the completion of "push --delete <remote> <ref>" to complete
refs on that <remote>, not all refs.
Before this cloning git.git and doing "git push --delete origin
p<TAB>" will complete nothing, since a fresh clone of git.git will
have no "pu" branch, whereas origin/p<TAB> will uselessly complete
origin/pu, but fully qualified references aren't accepted by
"--delete".
Now p<TAB> will complete as "pu". The completion of giving --delete
later, e.g. "git push origin --delete p<TAB>" remains unchanged, this
is a bug, but is a general existing limitation of the bash completion,
and not how git-push is documented, so I'm not fixing that case, but
adding a failing TODO test for it.
The testing code was supplied by SZEDER Gábor in
<20170421122832.24617-1-szeder.dev@gmail.com> with minor setup
modifications on my part.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Test-code-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git tag/branch/for-each-ref" family of commands long allowed to
filter the refs by "--contains X" (show only the refs that are
descendants of X), "--merged X" (show only the refs that are
ancestors of X), "--no-merged X" (show only the refs that are not
ancestors of X). One curious omission, "--no-contains X" (show
only the refs that are not descendants of X) has been added to
them.
* ab/ref-filter-no-contains:
tag: add tests for --with and --without
ref-filter: reflow recently changed branch/tag/for-each-ref docs
ref-filter: add --no-contains option to tag/branch/for-each-ref
tag: change --point-at to default to HEAD
tag: implicitly supply --list given another list-like option
tag: change misleading --list <pattern> documentation
parse-options: add OPT_NONEG to the "contains" option
tag: add more incompatibles mode tests
for-each-ref: partly change <object> to <commit> in help
tag tests: fix a typo in a test description
tag: remove a TODO item from the test suite
ref-filter: add test for --contains on a non-commit
ref-filter: make combining --merged & --no-merged an error
tag doc: reword --[no-]merged to talk about commits, not tips
tag doc: split up the --[no-]merged documentation
tag doc: move the description of --[no-]merged earlier
Just like we did in 0d1d6e50 ("t/t7003: replace \t with literal tab
in sed expression", 2010-08-12), avoid writing "\t" for HT in sed
scripts, which is not portable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command line completion updates.
* sg/completion-ctags:
completion: offer ctags symbol names for 'git log -S', '-G' and '-L:'
completion: extract completing ctags symbol names into helper function
completion: put matching ctags symbol names directly into COMPREPLY
The refs completion for large number of refs has been sped up,
partly by giving up disambiguating ambiguous refs and partly by
eliminating most of the shell processing between 'git for-each-ref'
and 'ls-remote' and Bash's completion facility.
* sg/completion-refs-speedup:
completion: speed up branch and tag completion
completion: fill COMPREPLY directly when completing fetch refspecs
completion: fill COMPREPLY directly when completing refs
completion: let 'for-each-ref' sort remote branches for 'checkout' DWIMery
completion: let 'for-each-ref' filter remote branches for 'checkout' DWIMery
completion: let 'for-each-ref' strip the remote name from remote branches
completion: let 'for-each-ref' and 'ls-remote' filter matching refs
completion: don't disambiguate short refs
completion: don't disambiguate tags and branches
completion: support excluding full refs
completion: support completing fully qualified non-fast-forward refspecs
completion: support completing full refs after '--option=refs/<TAB>'
completion: wrap __git_refs() for better option parsing
completion: remove redundant __gitcomp_nl() options from _git_commit()
An helper function to make it easier to append the result from
real_path() to a strbuf has been added.
* rs/strbuf-add-real-path:
strbuf: add strbuf_add_real_path()
cocci: use ALLOC_ARRAY
Change the tag, branch & for-each-ref commands to have a --no-contains
option in addition to their longstanding --contains options.
This allows for finding the last-good rollout tag given a known-bad
<commit>. Given a hypothetically bad commit cf5c7253e0, the git
version to revert to can be found with this hacky two-liner:
(git tag -l 'v[0-9]*'; git tag -l --contains cf5c7253e0 'v[0-9]*') |
sort | uniq -c | grep -E '^ *1 ' | awk '{print $2}' | tail -n 10
With this new --no-contains option the same can be achieved with:
git tag -l --no-contains cf5c7253e0 'v[0-9]*' | sort | tail -n 10
As the filtering machinery is shared between the tag, branch &
for-each-ref commands, implement this for those commands too. A
practical use for this with "branch" is e.g. finding branches which
were branched off between v2.8.0 and v2.10.0:
git branch --contains v2.8.0 --no-contains v2.10.0
The "describe" command also has a --contains option, but its semantics
are unrelated to what tag/branch/for-each-ref use --contains for. A
--no-contains option for "describe" wouldn't make any sense, other
than being exactly equivalent to not supplying --contains at all,
which would be confusing at best.
Add a --without option to "tag" as an alias for --no-contains, for
consistency with --with and --contains. The --with option is
undocumented, and possibly the only user of it is
Junio (<xmqqefy71iej.fsf@gitster.mtv.corp.google.com>). But it's
trivial to support, so let's do that.
The additions to the the test suite are inverse copies of the
corresponding --contains tests. With this change --no-contains for
tag, branch & for-each-ref is just as well tested as the existing
--contains option.
In addition to those tests, add a test for "tag" which asserts that
--no-contains won't find tree/blob tags, which is slightly
unintuitive, but consistent with how --contains works & is documented.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like in the case of search patterns for 'git grep', see 29eec71f2
(completion: match ctags symbol names in grep patterns, 2011-10-21)),
a common thing to look for using 'git log -S', '-G' and '-L:' is the
name of a symbol.
Teach the completion for 'git log' to offer ctags symbol names after
these options, both in stuck and in unstuck forms.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit doubled the number of __git_match_ctag()'s
positional parameters, and, to keep the position of existing
parameters for the sake of backwards compatibility, the prefix,
current word and suffix parameters ended up in different order than in
other functions accepting the same parameters. Then there is a
condition checking the existence of the tag file before invoking this
function.
We could still live with this if there were only a single callsite,
but the next commit will add a few more, so it's worth providing a
cleaner interface.
Add the wrapper function __git_complete_symbol(), which encompasses
the condition for checking the presence of the tag file and filling
COMPREPLY, and accepts '--opt=val'-style options with default values
that keep callsites simpler.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The one-liner awk script in __git_match_ctag() listing ctags symbol
names for 'git grep <TAB>' is already smart enough to list only symbol
names matching the current word to be completed.
Extend this helper function to accept prefix and suffix parameters to
be prepended and appended, respectively, to each listed symbol name in
the awk script, so its output won't require any additional processing
or filtering in the completion script before being handed over to
Bash. Use the faster __gitcomp_direct() helper instead of
__gitcomp_nl() to fill the fully processed matching symbol names into
Bash's COMPREPLY array.
Right after 'git grep <TAB>' in current git.git with 14k+ symbol names
in the tag file, best of five:
Before:
$ time __gitcomp_nl "$(__git_match_ctag "" tags)"
real 0m0.178s
user 0m0.176s
sys 0m0.000s
After:
$ time __gitcomp_direct "$(__git_match_ctag "" tags "" " ")"
real 0m0.058s
user 0m0.048s
sys 0m0.008s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modify __git_heads() and __git_tags() and the few callsites they have,
so we can let 'git for-each-ref' do all the hard work and these
functions' output won't need any further processing or filtering
before being handed over to Bash, resulting in faster branch and tag
completion. These are some of the same tricks used in the previous
commits to speed up refs completion, namely:
- Extend both functions to accept prefix, current word and suffix
positional parameters, all optional and all empty by default to
keep the parameterless behavior unaltered.
- Specify appropriate globbing patterns to 'git for-each-ref' to
list only branches or tags matching the given current word
parameter.
- Modify the 'git for-each-ref --format=<...>' to include the given
prefix and suffix.
- Adjust all callsites to specify the proper prefix, current word
and suffix parameters, and to fill COMPREPLY using
__gitcomp_direct().
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The __git_complete_fetch_refspecs() has to iterate over __git_refs()'s
output anyway to turn the listed matching refs into refspecs, and it
knows about the prefix and suffix that has to be added to each
refspec.
Modify this function to add the prefix and suffix to each refspec
while iterating and feed the result, since it doesn't need further
processing, to the new __gitcomp_direct() helper added in the previous
commit, because it should be faster when there are a lot of refspecs
to list.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__gitcomp_nl() iterates over all the possible completion words it gets
as argument
- filtering matching words,
- appending a trailing space to each matching word (in all but two
cases),
- prepending a prefix to each matching word (when completing words
after e.g. '--option=<TAB>' or 'master..<TAB>'), and
- adding each matching word to the COMPREPLY array.
This takes a while when a lot of refs are passed to __gitcomp_nl().
The previous changes in this series ensure that __git_refs() lists
only refs matching the current word to be completed, making a second
filtering in __gitcomp_nl() redundant.
Adding the necessary prefix and suffix could be done in __git_refs()
as well:
- When refs come from 'git for-each-ref', then that prefix and
suffix could be added much more efficiently using a 'git
for-each-ref' format containing said prefix and suffix. Care
should be taken, though, because that prefix might contain
'for-each-ref' format specifiers as part of the left hand side of
a '..' range or '...' symmetric difference notation or
fetch/push/etc. refspec, e.g. 'git log "evil-%(refname)..br<TAB>'.
Doubling every '%' in the prefix will prevent 'git for-each-ref'
from interpolating any of those contained specifiers.
- When refs come from 'git ls-remote', then that prefix and suffix
can be added in the shell loop that has to process 'git
ls-remote's output anyway.
- Finally, the prefix and suffix can be added to that handful of
potentially matching symbolic and pseudo refs right away in the
shell loop listing them.
And then all what is still left to do is to assign a bunch of
newline-separated words to a shell array, which can be done without a
shell loop iterating over each word, basically making all of
__gitcomp_nl() unnecessary for refs completion.
Add the helper function __gitcomp_direct() to fill the COMPREPLY array
with prefiltered and preprocessed words without any additional
processing, without a shell loop, with just one single compound
assignment. Modify __git_refs() to accept prefix and suffix
parameters and add them to each and every listed ref as described
above. Modify __git_complete_refs() to pass the prefix and suffix
parameters to __git_refs() and to feed __git_refs()'s output to
__gitcomp_direct() instead of __gitcomp_nl().
This speeds up refs completion when there are a lot of refs matching
the current word to be completed. Listing all branches for completion
in a repo with 100k local branches, all packed, best of five:
On Linux, near the beginning of this series, for reference:
$ time __git_complete_refs
real 0m2.028s
user 0m1.692s
sys 0m0.344s
Before this patch:
real 0m1.135s
user 0m1.112s
sys 0m0.024s
After:
real 0m0.367s
user 0m0.352s
sys 0m0.020s
On Windows, near the beginning:
real 0m13.078s
user 0m1.609s
sys 0m0.060s
Before this patch:
real 0m2.093s
user 0m1.641s
sys 0m0.060s
After:
real 0m0.683s
user 0m0.203s
sys 0m0.076s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When listing unique remote branches for 'git checkout's tracking
DWIMery, __git_refs() runs the classic '... |sort |uniq -u' pattern to
filter out duplicate remote branches.
Let 'git for-each-ref' do the sorting, sparing the overhead of
fork()+exec()ing 'sort' and a stage in the pipeline where potentially
relatively large amount of data can be passed between two subsequent
pipeline stages.
This speeds up refs completion for 'git checkout' a bit when a lot of
remote branches match the current word to be completed. Listing a
single local and 100k remote branches, all packed, best of five:
On Linux, before:
$ time __git_complete_refs --track
real 0m1.856s
user 0m1.816s
sys 0m0.060s
After:
real 0m1.550s
user 0m1.512s
sys 0m0.060s
On Windows, before:
real 0m3.128s
user 0m2.155s
sys 0m0.183s
After:
real 0m2.781s
user 0m1.826s
sys 0m0.136s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code listing unique remote branches for 'git checkout's tracking
DWIMery outputs only remote branches that match the current word to be
completed, but the filtering is done in a shell loop iterating over
all remote refs.
Let 'git for-each-ref' do the filtering, as it can do so much more
efficiently and we can remove that shell loop entirely.
This speeds up refs completion for 'git checkout' considerably when
there are a lot of non-matching remote refs to be filtered out.
Uniquely completing a branch in a repository with 100k remote
branches, all packed, best of five:
On Linux, before:
$ time __git_complete_refs --cur=maste --track
real 0m1.993s
user 0m1.740s
sys 0m0.304s
After:
real 0m0.266s
user 0m0.248s
sys 0m0.012s
On Windows, before:
real 0m6.187s
user 0m3.358s
sys 0m2.121s
After:
real 0m0.750s
user 0m0.015s
sys 0m0.090s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code listing unique remote branches for 'git checkout's tracking
DWIMery uses a shell parameter expansion in a loop iterating over each
listed ref to remove the remote's name from the remote branches, i.e.
the leading path component from the short ref. When listing refs from
a configured remote repository, '| sed s///' is used for the same
purpose.
Let 'git for-each-ref' strip one more leading path component from the
refs, i.e. use the format 'refname:strip=3' instead of '=2', making
that parameter expansion and 'sed' execution unnecessary.
This speeds up refs completion for 'git checkout'. Uniquely
completing a branch for 'git checkout maste<TAB>' in a repo with 100k
remote branches, all packed, best of five:
On Linux, near the beginning of this series, for reference:
$ time __git_complete_refs --cur=maste --track
real 0m8.185s
user 0m6.896s
sys 0m1.616s
Before this patch:
real 0m2.714s
user 0m2.344s
sys 0m0.436s
After:
real 0m1.993s
user 0m1.740s
sys 0m0.304s
On Windows, near the beginning:
real 1m8.421s
user 0m7.591s
sys 0m3.557s
Before this patch:
real 0m8.191s
user 0m4.638s
sys 0m2.918s
After:
real 0m6.187s
user 0m3.358s
sys 0m2.121s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When completing refs, several __git_refs() code paths list all the
refs from the refs/{heads,tags,remotes}/ hierarchy and then
__gitcomp_nl() iterates over those refs in a shell loop to filter out
refs not matching the current ref to be completed. This comes with a
considerable performance penalty when a repository contains a lot of
refs but the current ref can be uniquely completed or when only a
handful of refs match the current ref.
Reduce the number of iterations in __gitcomp_nl() from the number of
refs to the number of matching refs by specifying appropriate globbing
patterns to 'git for-each-ref' and 'git ls-remote' to list only those
refs that match the current ref to be completed. However, do so only
when the ref to match is explicitly given as parameter, because the
current word on the command line might contain a prefix like
'--option=' or 'branch..'. The __git_complete_refs() and
__git_complete_fetch_refspecs() helpers introduced previously in this
patch series already call __git_refs() specifying this current ref
parameter, so all their callsites, i.e. all places in the completion
script doing refs completion, can benefit from this optimization.
Furthermore, list only those symbolic and pseudo refs that match the
current ref to be completed. Though it doesn't matter at all in
itself performance-wise, it will allow us further significant
optimizations later in this series.
This speeds up refs completion considerably when there are a lot of
non-matching refs to be filtered out. Uniquely completing a branch in
a repository with 100k local branches, all packed, best of five:
On Linux, before:
$ time __git_complete_refs --cur=maste
real 0m0.831s
user 0m0.808s
sys 0m0.028s
After:
real 0m0.119s
user 0m0.104s
sys 0m0.008s
On Windows, before:
real 0m1.480s
user 0m1.031s
sys 0m0.060s
After:
real 0m0.377s
user 0m0.015s
sys 0m0.030s
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the completion script lists short refs it does so using the 'git
for-each-ref' format 'refname:short', which makes sure that all listed
refs are unambiguous. While disambiguating refs is technically
correct in this case, as opposed to the cases discussed in the
previous patch, this disambiguation involves several stat() syscalls
for each ref, thus, unfortunately, comes at a steep cost especially on
Windows and/or when there are a lot of refs to be listed. A user of
Git for Windows reported[1] 'git checkout <TAB>' taking ~11 seconds in
a repository with just about 4000 refs.
However, it's questionable whether ambiguous refs are really that bad
to justify that much extra cost:
- Ambiguous refs are not that common,
- even if a repository contains ambiguous refs, they only hurt when
the user actually happens to want to do something with one of the
ambiguous refs, and
- the issue can be easily circumvented by renaming those ambiguous
refs.
- On the other hand, apparently not that many refs are needed to
make refs completion unacceptably slow on Windows,
- and this slowness bites each and every time the user attempts refs
completion, even when the repository doesn't contain any ambiguous
refs.
- Furthermore, circumventing the issue might not be possible or
might be considerably more difficult and requires various
trade-offs (e.g. working in a repository with only a few selected
important refs while keeping a separate repository with all refs
for reference).
Arguably, in this case the benefits of technical correctness are
rather minor compared to the price we pay for it, and we are better
off opting for performance over correctness.
Use the 'git for-each-ref' format 'refname:strip=2' to list short refs
to spare the substantial cost of disambiguating.
This speeds up refs completion considerably. Uniquely completing a
branch in a repository with 100k local branches, all packed, best of
five:
On Linux, before:
$ time __git_complete_refs --cur=maste
real 0m1.662s
user 0m1.368s
sys 0m0.296s
After:
real 0m0.831s
user 0m0.808s
sys 0m0.028s
On Windows, before:
real 0m12.457s
user 0m1.016s
sys 0m0.092s
After:
real 0m1.480s
user 0m1.031s
sys 0m0.060s
[1] - https://github.com/git-for-windows/git/issues/524
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the completion script has to list only tags or only branches, it
uses the 'git for-each-ref' format 'refname:short', which makes sure
that all listed tags and branches are unambiguous. However,
disambiguating tags and branches in these cases is wrong, because:
- __git_tags(), the helper function listing possible tagname
arguments for 'git tag', lists an ambiguous tag
'refs/tags/ambiguous' as 'tags/ambiguous'. Its only consumer,
'git tag' expects its tagname argument to be under 'refs/tags/',
thus it interprets that abgiguous tag as
'refs/tags/tags/ambiguous'. Clearly wrong.
- __git_heads() lists possible branchname arguments for 'git branch'
and possible 'branch.<branchname>' configuration subsections.
Both of these expect branchnames to be under 'refs/heads/' and
misinterpret a disambiguated branchname like 'heads/ambiguous'.
Furthermore, disambiguation involves several stat() syscalls for each
tag or branch, thus comes at a steep cost especially on Windows and/or
when there are a lot of tags or branches to be listed.
Use the 'git for-each-ref' format 'refname:strip=2' instead of
'refname:short' to avoid harmful disambiguation of tags and branches
in __git_tags() and __git_heads().
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 49416ad22 (completion: support excluding refs, 2016-08-24) made
possible to complete short refs with a '^' prefix.
Extend the support to full refs to make completing '^refs/...' work.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After 'git fetch <remote> <TAB>' our completion script offers refspecs
that will fetch to a local branch with the same name as in the remote
repository, e.g. 'master:master'. This also completes
non-fast-forward refspecs, i.e. after a '+' prefix like
'+master:master', and fully qualified refspecs, e.g.
'refs/heads/master:refs/heads/master'. However, it does not complete
non-fast-forward fully qualified refspecs (or fully qualified refspecs
following any other prefix, e.g. '--option=', though currently no git
command supports such an option, but third party git commands might).
These refspecs are listed by the __git_refs2() function, which is just
a thin wrapper iterating over __git_refs()'s output, turning each
listed ref into a refspec. Now, it's certainly possible to modify
__git_refs2() and its callsite to pass an extra parameter containing
only the ref part of the current word to be completed (to follow suit
of the previous commit) to deal with prefixed fully qualified refspecs
as well. Unfortunately, keeping the current behavior unchanged in the
"no extra parameter" case brings in a bit of subtlety, which makes the
resulting code ugly and compelled me to write a 8-line long comment in
the proof of concept. Not good. However, since the callsite has to
be modified for proper functioning anyway, we might as well leave
__git_refs2() as is and introduce a new helper function without
backwards compatibility concerns.
Add the new function __git_complete_fetch_refspecs() that has all the
necessary parameters to do the right thing in all cases mentioned
above, including non-fast-forward fully qualified refspecs. This new
function can also easier benefit from optimizations coming later in
this patch series.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Completing full refs currently only works when the full ref stands on
in its own on the command line, but doesn't work when the current word
to be completed contains a prefix before the full ref, e.g.
'--option=refs/<TAB>' or 'master..refs/bis<TAB>'.
The reason is that __git_refs() looks at the current word to be
completed ($cur) as a whole to decide whether it has to list full (if
it starts with 'refs/') or short refs (otherwise). However, $cur also
holds said '--option=' or 'master..' prefixes, which of course throw
off this decision. Luckily, the default action is to list short refs,
that's why completing short refs happens to work even after a
'master..<TAB>' prefix and similar cases.
Pass only the ref part of the current word to be completed to
__git_refs() as a new positional parameter, so it can make the right
decision even if the whole current word contains some kind of a
prefix.
Make this new parameter the 4. positional parameter and leave the 3.
as an ignored placeholder for now (it will be used later in this patch
series).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_refs() currently accepts two optional positional parameters: a
remote and a flag for 'git checkout's tracking DWIMery. To fix a
minor bug, and, more importantly, for faster refs completion, this
series will add three more parameters: a prefix, the current word to
be completed and a suffix, i.e. the options accepted by __gitcomp() &
friends, and will change __git_refs() to list only refs matching that
given current word and to add that given prefix and suffix to the
listed refs.
However, __git_refs() is the helper function that is most likely used
in users' custom completion scriptlets for their own git commands, and
we don't want to break those, so
- we can't change __git_refs()'s default output format, i.e. we
can't by default append a trailing space to every listed ref,
meaning that the suffix parameter containing the default trailing
space would have to be specified on every invocation, and
- we can't change the position of existing positional parameters
either, so there would have to be plenty of set-but-empty
placeholder positional parameters all over the completion script.
Furthermore, with five positional parameters it would be really hard
to remember which position means what.
To keep callsites simple, add the new wrapper function
__git_complete_refs() around __git_refs(), which:
- instead of positional parameters accepts real '--opt=val'-style
options and with minimalistic option parsing translates them to
__git_refs()'s and __gitcomp_nl()'s positional parameters, and
- includes the '__gitcomp_nl "$(__git_refs ...)" ...' command
substitution to make its behavior match its name and the behavior
of other __git_complete_* functions, and to limit future changes
in this series to __git_refs() and this new wrapper function.
Call this wrapper function instead of __git_refs() wherever possible
throughout the completion script, i.e. when __git_refs()'s output is
fed to __gitcomp_nl() right away without further processing, which
means all callsites except a single one in the __git_refs2() helper.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line prompt (in contrib/) learned a new 'tag' style
that can be specified with GIT_PS1_DESCRIBE_STYLE, to describe a
detached HEAD with "git describe --tags".
* mg/prompt-describe-tags:
git-prompt: add a describe style for any tags
git-prompt has various describe styles, among them "describe" (by
annotated tags) and "default" (by exact match with any tag).
Add a mode "tag" that describes by any tag, annotated or not.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need for Python only to give a few messages to the
standard error stream, but we somehow did.
* ss/remote-bzr-hg-placeholder-wo-python:
contrib: git-remote-{bzr,hg} placeholders don't need Python
An helper function to make it easier to append the result from
real_path() to a strbuf has been added.
* rs/strbuf-add-real-path:
strbuf: add strbuf_add_real_path()
cocci: use ALLOC_ARRAY
It does not make sense for these placeholder scripts to depend on Python
just because the real scripts do. At the example of Git for Windows, we
would not even be able to see those warnings as it does not ship with
Python. So just use plain shell scripts instead.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clean-up and updates to command line completion (in contrib/).
* sg/completion: (22 commits)
completion: restore removed line continuating backslash
completion: cache the path to the repository
completion: extract repository discovery from __gitdir()
completion: don't guard git executions with __gitdir()
completion: consolidate silencing errors from git commands
completion: don't use __gitdir() for git commands
completion: respect 'git -C <path>'
rev-parse: add '--absolute-git-dir' option
completion: fix completion after 'git -C <path>'
completion: don't offer commands when 'git --opt' needs an argument
completion: list short refs from a remote given as a URL
completion: don't list 'HEAD' when trying refs completion outside of a repo
completion: list refs from remote when remote's name matches a directory
completion: respect 'git --git-dir=<path>' when listing remote refs
completion: fix most spots not respecting 'git --git-dir=<path>'
completion: ensure that the repository path given on the command line exists
completion tests: add tests for the __git_refs() helper function
completion tests: check __gitdir()'s output in the error cases
completion tests: consolidate getting path of current working directory
completion tests: make the $cur variable local to the test helper functions
...
"git describe" and "git name-rev" have been taught to take more
than one refname patterns to restrict the set of refs to base their
naming output on, and also learned to take negative patterns to
name refs not to be used for naming via their "--exclude" option.
* jk/describe-omit-some-refs:
describe: teach describe negative pattern matches
describe: teach --match to accept multiple patterns
name-rev: add support to exclude refs by pattern match
name-rev: extend --refs to accept multiple patterns
doc: add documentation for OPT_STRING_LIST
Add a function for appending the canonized absolute pathname of a given
path to a strbuf. It keeps the existing contents intact, as expected of
a function of the strbuf_add() family, while avoiding copying the result
if the given strbuf is empty. It's more consistent with the rest of the
strbuf API than strbuf_realpath(), which it's wrapping.
Also add a semantic patch demonstrating its intended usage and apply it
to the current tree. Using strbuf_add_real_path() instead of calling
strbuf_addstr() and real_path() avoids an extra copy to a static buffer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a semantic patch for using ALLOC_ARRAY to allocate arrays and apply
the transformation on the current source tree. The macro checks for
multiplication overflow and infers the element size automatically; the
result is shorter and safer code.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new coccinelle rule that catches a check of !pointer before the
pointer is free(3)d, which most likely is a bug.
* rs/cocci-check-free-only-null:
cocci: detect useless free(3) calls
More command line completion (in contrib/) for recent additions.
* cw/completion:
completion: recognize more long-options
completion: teach remote subcommands to complete options
completion: teach replace to complete options
completion: teach ls-remote to complete options
completion: improve bash completion for git-add
completion: add subcommand completion for rerere
completion: teach submodule subcommands to complete options
Those two options are specifying the default values that
__gitcomp_nl() would use anyway when invoked with no options at all.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent commit 1cd23e9e0 (completion: don't use __gitdir() for git
commands, 2017-02-03) rewrapped a couple of long lines, and while
doing so it inadvertently removed a '\' from the end of a line, thus
breaking completion for 'git config remote.name.push <TAB>'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a semantic patch for removing checks that cause free(3) to only be
called with a NULL pointer, as that must be a programming mistake.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--add-author-from and --use-log-author are for "git svn dcommit",
not "git svn (init|clone)"
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command completion only recognizes a subset of the available options for
the various git commands. The set of recognized options needs to balance
between having all useful options and to not clutter the terminal.
This commit adds all long-options that are mentioned in the man-page
synopsis of the respective git command. Possibly dangerous options are
not included in this set, to avoid accidental data loss. The added
options are:
- apply: --recount --directory=
- archive: --output
- branch: --column --no-column --sort= --points-at
- clone: --no-single-branch --shallow-submodules
- commit: --patch --short --date --allow-empty
- describe: --first-parent
- fetch, pull: --unshallow --update-shallow
- fsck: --name-objects
- grep: --break --heading --show-function --function-context
--untracked --no-index
- mergetool: --prompt --no-prompt
- reset: --keep
- revert: --strategy= --strategy-option=
- shortlog: --email
- tag: --merged --no-merged --create-reflog
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git-remote needs to complete remote names, its subcommands, and options
thereof. In addition to the existing subcommand and remote name
completion, do also complete the options
- add: --track --master --fetch --tags --no-tags --mirror=
- set-url: --push --add --delete
- get-url: --push --all
- prune: --dry-run
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git-replace needs to complete references and its own options. In
addition to the existing references completions, do also complete the
options --edit --graft --format= --list --delete.
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-remote needs to complete remote names and its own options. In
addition to the existing remote name completions, do also complete
the options --heads, --tags, --refs, --get-url, and --symref.
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command completion for git-add did not recognize some long-options.
This commits adds completion for all long-options that are mentioned in
the man-page synopsis. In addition, if the user specified `--update` or
`-u`, path completion will only suggest modified tracked files.
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Managing recorded resolutions requires command-line usage of git-rerere.
Added subcommand completion for rerere and path completion for its
subcommand forget.
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each submodule subcommand has specific long-options. Therefore, teach
bash completion to support option completion based on the current
subcommand. All long-options that are mentioned in the man-page synopsis
are added.
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After the previous changes in this series there are only a handful of
$(__gitdir) command substitutions left in the completion script, but
there is still a bit of room for improvements:
1. The command substitution involves the forking of a subshell,
which has considerable overhead on some platforms.
2. There are a few cases, where this command substitution is
executed more than once during a single completion, which means
multiple subshells and possibly multiple 'git rev-parse'
executions. __gitdir() is invoked twice while completing refs
for e.g. 'git log', 'git rebase', 'gitk', or while completing
remote refs for 'git fetch' or 'git push'.
Both of these points can be addressed by using the
__git_find_repo_path() helper function introduced in the previous
commit:
1. __git_find_repo_path() stores the path to the repository in a
variable instead of printing it, so the command substitution
around the function can be avoided. Or rather: the command
substitution should be avoided to make the new value of the
variable set inside the function visible to the callers.
(Yes, there is now a command substitution inside
__git_find_repo_path() around each 'git rev-parse', but that's
executed only if necessary, and only once per completion, see
point 2. below.)
2. $__git_repo_path, the variable holding the path to the
repository, is declared local in the toplevel completion
functions __git_main() and __gitk_main(). Thus, once set, the
path is visible in all completion functions, including all
subsequent calls to __git_find_repo_path(), meaning that they
wouldn't have to re-discover the path to the repository.
So call __git_find_repo_path() and use $__git_repo_path instead of the
$(__gitdir) command substitution to access paths in the .git
directory. Turn tests checking __gitdir()'s repository discovery into
tests of __git_find_repo_path() such that only the tested function
changes but the expected results don't, ensuring that repo discovery
keeps working as it did before.
As __gitdir() is not used anymore in the completion script, mark it as
deprecated and direct users' attention to __git_find_repo_path() and
$__git_repo_path. Yet keep four __gitdir() tests to ensure that it
handles success and failure of __git_find_repo_path() and that it
still handles its optional remote argument, because users' custom
completion scriptlets might depend on it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To prepare for caching the path to the repository in the following
commit, extract the repository discovering part of __gitdir() into the
__git_find_repo_path() helper function, which stores the found path in
the $__git_repo_path variable instead of printing it. Make __gitdir()
a wrapper around this new function. Declare $__git_repo_path local in
the toplevel completion functions __git_main() and __gitk_main() to
ensure that it never leaks into the environment and influences
subsequent completions (though this isn't necessary right now, as
__gitdir() is still only executed in subshells, but will matter for
the following commit).
Adjust tests checking __gitdir() or any other completion function
calling __gitdir() to perform those checks in a subshell to prevent
$__git_repo_path from leaking into the test environment. Otherwise
leave the tests unchanged to demonstrate that this change doesn't
alter __gitdir()'s behavior.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Three completion functions, namely __git_index_files(), __git_heads()
and __git_tags(), first run __gitdir() and check that the path it
outputs exists, i.e. that there is a git repository, and run a git
command only if there is one.
After the previous changes in this series there are no further uses of
__gitdir()'s output in these functions besides those checks. And
those checks are unnecessary, because we can just execute those git
commands outside of a repository and let them error out. We don't
perform such a check in other places either.
Remove this check and the __gitdir() call from these functions,
sparing the fork()+exec() overhead of the command substitution and the
potential 'git rev-parse' execution.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Outputting error messages during completion is bad: they disrupt the
command line, can't be deleted, and the user is forced to Ctrl-C and
start over most of the time. We already silence stderr of many git
commands in our Bash completion script, but there are still some in
there that can spew error messages when something goes wrong.
We could add the missing stderr redirections to all the remaining
places, but instead let's leverage that git commands are now executed
through the previously introduced __git() wrapper function, and
redirect standard error to /dev/null only in that function. This way
we need only one redirection to take care of errors from almost all
git commands. Redirecting standard error of the __git() wrapper
function thus became redundant, remove them.
The exceptions, i.e. the repo-independent git executions and those in
the __gitdir() function that don't go through __git() already have
their standard error silenced.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several completion functions contain the following pattern to run git
commands respecting the path to the repository specified on the
command line:
git --git-dir="$(__gitdir)" <cmd> <options>
This imposes the overhead of fork()ing a subshell for the command
substitution and potentially fork()+exec()ing 'git rev-parse' inside
__gitdir().
Now, if neither '--gitdir=<path>' nor '-C <path>' options are
specified on the command line, then those git commands are perfectly
capable to discover the repository on their own. If either one or
both of those options are specified on the command line, then, again,
the git commands could discover the repository, if we pass them all of
those options from the command line.
This means we don't have to run __gitdir() at all for git commands and
can spare its fork()+exec() overhead.
Use Bash parameter expansions to check the $__git_dir variable and
$__git_C_args array and to assemble the appropriate '--git-dir=<path>'
and '-C <path>' options if either one or both are present on the
command line. These parameter expansions are, however, rather long,
so instead of changing all git executions and make already long lines
even longer, encapsulate running git with '--git-dir=<path> -C <path>'
options into the new __git() wrapper function. Furthermore, this
wrapper function will also enable us to silence error messages from
git commands uniformly in one place in a later commit.
There's one tricky case, though: in __git_refs() local refs are listed
with 'git for-each-ref', where "local" is not necessarily the
repository we are currently in, but it might mean a remote repository
in the filesystem (e.g. listing refs for 'git fetch /some/other/repo
<TAB>'). Use one-shot variable assignment to override $__git_dir with
the path of the repository where the refs should come from. Although
one-shot variable assignments in front of shell functions are to be
avoided in our scripts in general, in the Bash completion script we
can do that safely.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git -C <path>' option(s) on the command line should be taken into
account during completion, because
- like '--git-dir=<path>', it can lead us to a different repository,
- a few git commands executed in the completion script do care about
in which directory they are executed, and
- the command for which we are providing completion might care about
in which directory it will be executed.
However, unlike '--git-dir=<path>', the '-C <path>' option can be
specified multiple times and their effect is cumulative, so we can't
just store a single '<path>' in a variable. Nor can we simply
concatenate a path from '-C <path1> -C <path2> ...', because e.g. (in
an arguably pathological corner case) a relative path might be
followed by an absolute path.
Instead, store all '-C <path>' options word by word in the
$__git_C_args array in the main git completion function, and pass this
array, if present, to 'git rev-parse --absolute-git-dir' when
discovering the repository in __gitdir(), and let it take care of
multiple options, relative paths, absolute paths and everything.
Also pass all '-C <path> options via the $__git_C_args array to those
git executions which require a worktree and for which it matters from
which directory they are executed from. There are only three such
cases:
- 'git diff-index' and 'git ls-files' in __git_ls_files_helper()
used for git-aware filename completion, and
- the 'git ls-tree' used for completing the 'ref:path' notation.
The other git commands executed in the completion script don't need
these '-C <path>' options, because __gitdir() already took those
options into account. It would not hurt them, either, but let's not
induce unnecessary code churn.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main completion function finds the name of the git command by
iterating through all the words on the command line in search for the
first non-option-looking word. As it is not aware of 'git -C's
mandatory path argument, if the '-C <path>' option is present, 'path'
will be the first such word and it will be mistaken for a git command.
This breaks completion in various ways:
- If 'path' happens to match one of the commands supported by the
completion script, then options of that command will be offered.
- If 'path' doesn't match a supported command and doesn't contain any
characters not allowed in Bash identifier names, then the
completion script does basically nothing and Bash in turn falls
back to filename completion for all subsequent words.
- Otherwise, if 'path' does contain such an unallowed character, then
it leads to a more or less ugly error message in the middle of the
command line. The standard '/' directory separator is such a
character, and it happens to trigger one of the uglier errors:
$ git -C some/path <TAB>sh.exe": declare: `_git_some/path': not a valid identifier
error: invalid key: alias.some/path
Fix this by skipping 'git -C's mandatory path argument while iterating
over the words on the command line. Extend the relevant test with
this case and, while at it, with cases that needed similar treatment
in the past ('--git-dir', '-c', '--work-tree' and '--namespace').
Additionally, silence the standard error of the 'declare' builtins
looking for the completion function associated with the git command
and of the 'git config' query for the aliased command. So if git ever
learns a new option with a mandatory argument in the future, then,
though the completion script will again misbehave, at least the
command line will not be utterly disrupted by those error messages.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main git options '--git-dir', '-c', '-C', '--worktree' and
'--namespace' require an argument, but attempting completion right
after them lists git commands.
Don't offer anything right after these options, thus let Bash fall
back to filename completion, because
- the three options '--git-dir', '-C' and '--worktree' do actually
require a path argument, and
- we don't complete the required argument of '-c' and '--namespace',
and in that case the "standard" behavior of our completion script
is to not offer anything, but fall back to filename completion.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e832f5c096 (completion: avoid ls-remote in certain scenarios,
2013-05-28) turned a 'git ls-remote <remote>' query into a 'git
for-each-ref refs/remotes/<remote>/' to improve responsiveness of
remote refs completion by avoiding potential network communication.
However, it inadvertently made impossible to complete short refs from
a remote given as a URL, e.g. 'git fetch git://server.com/repo.git
<TAB>', because there is, of course, no such thing as
'refs/remotes/git://server.com/repo.git'.
Since the previous commit we tell apart configured remotes, i.e. those
that can have a hierarchy under 'refs/remotes/', from others that
don't, including remotes given as URL, so we know when we can't use
the faster 'git for-each-ref'-based approach.
Resurrect the old, pre-e832f5c09680 'git ls-remote'-based code for the
latter case to support listing short refs from remotes given as a URL.
The code is slightly updated from the original to
- take into account the path to the repository given on the command
line (if any), and
- omit 'ORIG_HEAD' from the query, as 'git ls-remote' will never
list it anyway.
When the remote given to __git_refs() doesn't exist, then it will be
handled by this resurrected 'git ls-remote' query. This code path
doesn't list 'HEAD' unconditionally, which has the nice side effect of
fixing two more expected test failures.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When refs completion is attempted while not in a git repository, the
completion script offers 'HEAD' erroneously.
Check early in __git_refs() that there is either a repository or a
remote to work on, and return early if neither is given.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the remote given to __git_refs() happens to match both the name of
a configured remote and the name of a directory in the current working
directory, then that directory is assumed to be a git repository, and
listing refs from that directory will be attempted. This is wrong,
because in such a situation git commands (e.g. 'git fetch|pull|push
<remote>' whom these refs will eventually be passed to) give
precedence to the configured remote. Therefore, __git_refs() should
list refs from the configured remote as well.
Add the helper function __git_is_configured_remote() that checks
whether its argument matches the name of a configured remote. Use
this helper to decide how to handle the remote passed to __git_refs().
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In __git_refs() the git commands listing refs, both short and full,
from a given remote repository are run without giving them the path to
the git repository which might have been specified on the command line
via 'git --git-dir=<path>'. This is bad, those git commands should
access the 'refs/remotes/<remote>/' hierarchy or the remote and
credentials configuration in that specified repository.
Use the __gitdir() helper only to find the path to the .git directory
and pass the resulting path to the 'git ls-remote' and 'for-each-ref'
executions that list remote refs. While modifying that 'for-each-ref'
line, remove the superfluous disambiguating doubledash.
Don't use __gitdir() to check that the given remote is on the file
system: basically it performs only a single if statement for us at the
considerable cost of fork()ing a subshell for a command substitution.
We are better off to perform all the necessary checks of the remote in
__git_refs().
Though __git_refs() was the last remaining callsite that passed a
remote to __gitdir(), don't delete __gitdir()'s remote-handling part
yet, just in case some users' custom completion scriptlets depend on
it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The completion script already respects the path to the repository
specified on the command line most of the time, here we add the
necessary '--git-dir=$(__gitdir)' options to most of the places where
git was executed without it. The exceptions where said option is not
added are the git invocations:
- in __git_refs() which are non-trivial and will be the subject of
the following patch,
- getting the list of git commands, merge strategies and archive
formats, because these are independent from the repository and
thus don't need it, and
- the 'git rev-parse --git-dir' in __gitdir() itself.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The __gitdir() helper function prints the path to the git repository
to its stdout or stays silent and returns with error when it can't
find a repository or when the repository given via $GIT_DIR doesn't
exist.
This is not the case, however, when the path in $__git_dir, i.e. the
path to the repository specified on the command line via 'git
--git-dir=<path>', doesn't exist: __gitdir() still outputs it as if it
were a real existing repository, making some completion functions
believe that they operate on an existing repository.
Check that the path in $__git_dir exists and return with error without
printing anything to stdout if it doesn't.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
That "first argument is passed to __gitdir()" statement in particular
is not really helpful, and after this series it won't be the case
anyway.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line completion (in contrib/) learned that
"git diff --submodule=" can take "diff" as a recently added option.
* pl/complete-diff-submodule-diff:
Completion: Add support for --submodule=diff
