Commit Graph

2073 Commits

Author SHA1 Message Date
Junio C Hamano
ba2d451122 Merge branch 'tg/stash-refresh-index'
"git stash" learned to write refreshed index back to disk.

* tg/stash-refresh-index:
  stash: make sure to write refreshed cache
  merge: use refresh_and_write_cache
  factor out refresh_and_write_cache function
2019-10-07 11:32:53 +09:00
Johannes Schindelin
c097b95a26 msvc: avoid using minus operator on unsigned types
MSVC complains about this with `-Wall`, which can be taken as a sign
that this is indeed a real bug. The symptom is:

	C4146: unary minus operator applied to unsigned type, result
	still unsigned

Let's avoid this warning in the minimal way, e.g. writing `-1 -
<unsigned value>` instead of `-<unsigned value> - 1`.

Note that the change in the `estimate_cache_size()` function is
needed because MSVC considers the "return type" of the `sizeof()`
operator to be `size_t`, i.e. unsigned, and therefore it cannot be
negated using the unary minus operator.

Even worse, that arithmetic is doing extra work, in vain. We want to
calculate the entry extra cache size as the difference between the
size of the `cache_entry` structure minus the size of the
`ondisk_cache_entry` structure, padded to the appropriate alignment
boundary.

To that end, we start by assigning that difference to the `per_entry`
variable, and then abuse the `len` parameter of the
`align_padding_size()` macro to take the negative size of the ondisk
entry size. Essentially, we try to avoid passing the already calculated
difference to that macro by passing the operands of that difference
instead, when the macro expects operands of an addition:

	#define align_padding_size(size, len) \
		((size + (len) + 8) & ~7) - (size + len)

Currently, we pass A and -B to that macro instead of passing A - B and
0, where A - B is already stored in the `per_entry` variable, ready to
be used.

This is neither necessary, nor intuitive. Let's fix this, and have code
that is both easier to read and that also does not trigger MSVC's
warning.

While at it, we take care of reporting overflows (which are unlikely,
but hey, defensive programming is good!).

We _also_ take pains of casting the unsigned value to signed: otherwise,
the signed operand (i.e. the `-1`) would be cast to unsigned before
doing the arithmetic.

Helped-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-06 09:07:44 +09:00
Thomas Gummerer
22184497a3 factor out refresh_and_write_cache function
Getting the lock for the index, refreshing it and then writing it is a
pattern that happens more than once throughout the codebase, and isn't
trivial to get right.  Factor out the refresh_and_write_cache function
from builtin/am.c to read-cache.c, so it can be re-used in other
places in a subsequent commit.

Note that we return different error codes for failing to refresh the
cache, and failing to write the index.  The current caller only cares
about failing to write the index.  However for other callers we're
going to convert in subsequent patches we will need this distinction.

Helped-by: Martin Ågren <martin.agren@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-20 09:58:21 -07:00
Junio C Hamano
627b826834 Merge branch 'md/list-objects-filter-combo'
The list-objects-filter API (used to create a sparse/lazy clone)
learned to take a combined filter specification.

* md/list-objects-filter-combo:
  list-objects-filter-options: make parser void
  list-objects-filter-options: clean up use of ALLOC_GROW
  list-objects-filter-options: allow mult. --filter
  strbuf: give URL-encoding API a char predicate fn
  list-objects-filter-options: make filter_spec a string_list
  list-objects-filter-options: move error check up
  list-objects-filter: implement composite filters
  list-objects-filter-options: always supply *errbuf
  list-objects-filter: put omits set in filter struct
  list-objects-filter: encapsulate filter components
2019-09-18 11:50:09 -07:00
Junio C Hamano
b9ac6c59b8 Merge branch 'cc/multi-promisor'
Teach the lazy clone machinery that there can be more than one
promisor remote and consult them in order when downloading missing
objects on demand.

* cc/multi-promisor:
  Move core_partial_clone_filter_default to promisor-remote.c
  Move repository_format_partial_clone to promisor-remote.c
  Remove fetch-object.{c,h} in favor of promisor-remote.{c,h}
  remote: add promisor and partial clone config to the doc
  partial-clone: add multiple remotes in the doc
  t0410: test fetching from many promisor remotes
  builtin/fetch: remove unique promisor remote limitation
  promisor-remote: parse remote.*.partialclonefilter
  Use promisor_remote_get_direct() and has_promisor_remote()
  promisor-remote: use repository_format_partial_clone
  promisor-remote: add promisor_remote_reinit()
  promisor-remote: implement promisor_remote_get_direct()
  Add initial support for many promisor remotes
  fetch-object: make functions return an error code
  t0410: remove pipes after git commands
2019-09-18 11:50:09 -07:00
Stephen P. Smith
29f4332e66 Quit passing 'now' to date code
Commit b841d4ff43 (Add `human` format to test-tool, 2019-01-28) added
a get_time() function which allows $GIT_TEST_DATE_NOW in the
environment to override the current time. So we no longer need to
interpret that variable in cmd__date().

Therefore, we can stop passing the "now" parameter down through the
date functions, since nobody uses them. Note that we do need to make
sure all of the previous callers that took a "now" parameter are
correctly using get_time().

Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-12 11:03:51 -07:00
brian m. carlson
8d4d86b0f0 cache: remove null_sha1
All of the existing uses of null_sha1 can be converted into uses of
null_oid, so do so.  Remove null_sha1 and is_null_sha1, and define
is_null_oid in terms of null_oid.  This also has the additional benefit
of removing several uses of sha1_to_hex.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-19 15:04:59 -07:00
Junio C Hamano
3e06e74e4c Merge branch 'sg/rebase-progress' into maint
Use "Erase in Line" CSI sequence that is already used in the editor
support to clear cruft in the progress output.

* sg/rebase-progress:
  progress: use term_clear_line()
  rebase: fix garbled progress display with '-x'
  pager: add a helper function to clear the last line in the terminal
  t3404: make the 'rebase.missingCommitsCheck=ignore' test more focused
  t3404: modernize here doc style
2019-07-29 12:38:19 -07:00
Junio C Hamano
1eb0a12ec3 Merge branch 'nd/tree-walk-with-repo'
The tree-walk API learned to pass an in-core repository
instance throughout more codepaths.

* nd/tree-walk-with-repo:
  t7814: do not generate same commits in different repos
  Use the right 'struct repository' instead of the_repository
  match-trees.c: remove the_repo from shift_tree*()
  tree-walk.c: remove the_repo from get_tree_entry_follow_symlinks()
  tree-walk.c: remove the_repo from get_tree_entry()
  tree-walk.c: remove the_repo from fill_tree_descriptor()
  sha1-file.c: remove the_repo from read_object_with_reference()
2019-07-19 11:30:21 -07:00
Junio C Hamano
6624e07b36 Merge branch 'sg/rebase-progress'
Use "Erase in Line" CSI sequence that is already used in the editor
support to clear cruft in the progress output.

* sg/rebase-progress:
  progress: use term_clear_line()
  rebase: fix garbled progress display with '-x'
  pager: add a helper function to clear the last line in the terminal
  t3404: make the 'rebase.missingCommitsCheck=ignore' test more focused
  t3404: modernize here doc style
2019-07-09 15:25:45 -07:00
Matthew DeVore
5a133e8a7f list-objects-filter-options: clean up use of ALLOC_GROW
Introduce a new macro ALLOC_GROW_BY which automatically zeros the added
array elements and takes care of updating the nr value. Use the macro in
code introduced earlier in this patchset.

Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-28 08:41:53 -07:00
Nguyễn Thái Ngọc Duy
90d3405196 match-trees.c: remove the_repo from shift_tree*()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-27 12:45:17 -07:00
Nguyễn Thái Ngọc Duy
d3b4705ab8 sha1-file.c: remove the_repo from read_object_with_reference()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-27 12:45:17 -07:00
Christian Couder
4ca9474efa Move core_partial_clone_filter_default to promisor-remote.c
Now that we can have a different default partial clone filter for
each promisor remote, let's hide core_partial_clone_filter_default
as a static in promisor-remote.c to avoid it being use for
anything other than managing backward compatibility.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-25 14:05:38 -07:00
Christian Couder
60b7a92d84 Move repository_format_partial_clone to promisor-remote.c
Now that we have has_promisor_remote() and can use many
promisor remotes, let's hide repository_format_partial_clone
as a static in promisor-remote.c to avoid it being use
for anything other than managing backward compatibility.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-25 14:05:38 -07:00
SZEDER Gábor
cd1096b282 pager: add a helper function to clear the last line in the terminal
There are a couple of places where we want to clear the last line on
the terminal, e.g. when a progress bar line is overwritten by a
shorter line, then the end of that progress line would remain visible,
unless we cover it up.

In 'progress.c' we did this by always appending a fixed number of
space characters to the next line (even if it was not shorter than the
previous), but as it turned out that fixed number was not quite large
enough, see the fix in 9f1fd84e15 (progress: clear previous progress
update dynamically, 2019-04-12).  From then on we've been keeping
track of the length of the last displayed progress line and appending
the appropriate number of space characters to the next line, if
necessary, but, alas, this approach turned out to be error prone, see
the fix in 1aed1a5f25 (progress: avoid empty line when breaking the
progress line, 2019-05-19).  The next patch in this series is about to
fix a case where we don't clear the last line, and on occasion do end
up with such garbage at the end of the line.  It would be great if we
could do that without the need to deal with that without meticulously
computing the necessary number of space characters.

So add a helper function to clear the last line on the terminal using
an ANSI escape sequence, which has the advantage to clear the whole
line no matter how wide it is, even after the terminal width changed.
Such an escape sequence is not available on dumb terminals, though, so
in that case fall back to simply print a whole terminal width (as
reported by term_columns()) worth of space characters.

In 'editor.c' launch_specified_editor() already used this ANSI escape
sequence, so replace it with a call to this function.

Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-24 13:38:46 -07:00
Jeff King
c0566d78aa hash.h: move object_id definition from cache.h
Our hashmap.h helpfully defines a sha1hash() function. But it cannot
define a similar oidhash() without including all of cache.h, which
itself wants to include hashmap.h! Let's break this circular dependency
by moving the definition to hash.h, along with the remaining RAWSZ
macros, etc. That will put them with the existing git_hash_algo
definition.

One alternative would be to move oidhash() into cache.h, but it's
already quite bloated. We're better off moving things out than in.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-20 10:40:42 -07:00
Johannes Schindelin
d4c0a3ac78 fill_stat_cache_info(): prepare for an fsmonitor fix
We will need to pass down the `struct index_state` to
`mark_fsmonitor_valid()` for an upcoming bug fix, and this here function
calls that there function, so we need to extend the signature of
`fill_stat_cache_info()` first.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-28 12:43:42 -07:00
Junio C Hamano
cfd635c742 Merge branch 'js/fsmonitor-refresh-after-discarding-index'
The fsmonitor interface got out of sync after the in-core index
file gets discarded, which has been corrected.

* js/fsmonitor-refresh-after-discarding-index:
  fsmonitor: force a refresh after the index was discarded
  fsmonitor: demonstrate that it is not refreshed after discard_index()
2019-05-19 16:45:33 +09:00
Junio C Hamano
4aeeef3773 Merge branch 'dl/no-extern-in-func-decl'
Mechanically and systematically drop "extern" from function
declarlation.

* dl/no-extern-in-func-decl:
  *.[ch]: manually align parameter lists
  *.[ch]: remove extern from function declarations using sed
  *.[ch]: remove extern from function declarations using spatch
2019-05-13 23:50:32 +09:00
Junio C Hamano
0b179f3175 Merge branch 'nd/sha1-name-c-wo-the-repository'
Further code clean-up to allow the lowest level of name-to-object
mapping layer to work with a passed-in repository other than the
default one.

* nd/sha1-name-c-wo-the-repository: (34 commits)
  sha1-name.c: remove the_repo from get_oid_mb()
  sha1-name.c: remove the_repo from other get_oid_*
  sha1-name.c: remove the_repo from maybe_die_on_misspelt_object_name
  submodule-config.c: use repo_get_oid for reading .gitmodules
  sha1-name.c: add repo_get_oid()
  sha1-name.c: remove the_repo from get_oid_with_context_1()
  sha1-name.c: remove the_repo from resolve_relative_path()
  sha1-name.c: remove the_repo from diagnose_invalid_index_path()
  sha1-name.c: remove the_repo from handle_one_ref()
  sha1-name.c: remove the_repo from get_oid_1()
  sha1-name.c: remove the_repo from get_oid_basic()
  sha1-name.c: remove the_repo from get_describe_name()
  sha1-name.c: remove the_repo from get_oid_oneline()
  sha1-name.c: add repo_interpret_branch_name()
  sha1-name.c: remove the_repo from interpret_branch_mark()
  sha1-name.c: remove the_repo from interpret_nth_prior_checkout()
  sha1-name.c: remove the_repo from get_short_oid()
  sha1-name.c: add repo_for_each_abbrev()
  sha1-name.c: store and use repo in struct disambiguate_state
  sha1-name.c: add repo_find_unique_abbrev_r()
  ...
2019-05-09 00:37:25 +09:00
Junio C Hamano
96379f043f Merge branch 'en/merge-directory-renames'
"git merge-recursive" backend recently learned a new heuristics to
infer file movement based on how other files in the same directory
moved.  As this is inherently less robust heuristics than the one
based on the content similarity of the file itself (rather than
based on what its neighbours are doing), it sometimes gives an
outcome unexpected by the end users.  This has been toned down to
leave the renamed paths in higher/conflicted stages in the index so
that the user can examine and confirm the result.

* en/merge-directory-renames:
  merge-recursive: switch directory rename detection default
  merge-recursive: give callers of handle_content_merge() access to contents
  merge-recursive: track information associated with directory renames
  t6043: fix copied test description to match its purpose
  merge-recursive: switch from (oid,mode) pairs to a diff_filespec
  merge-recursive: cleanup handle_rename_* function signatures
  merge-recursive: track branch where rename occurred in rename struct
  merge-recursive: remove ren[12]_other fields from rename_conflict_info
  merge-recursive: shrink rename_conflict_info
  merge-recursive: move some struct declarations together
  merge-recursive: use 'ci' for rename_conflict_info variable name
  merge-recursive: rename locals 'o' and 'a' to 'obuf' and 'abuf'
  merge-recursive: rename diff_filespec 'one' to 'o'
  merge-recursive: rename merge_options argument from 'o' to 'opt'
  Use 'unsigned short' for mode, like diff_filespec does
2019-05-09 00:37:22 +09:00
Johannes Schindelin
398a3b0899 fsmonitor: force a refresh after the index was discarded
With this change, the `index_state` struct becomes the new home for the
flag that says whether the fsmonitor hook has been run, i.e. it is now
per-index.

It also gets re-set when the index is discarded, fixing the bug
demonstrated by the "test_expect_failure" test added in the preceding
commit. In that case fsmonitor-enabled Git would miss updates under
certain circumstances, see that preceding commit for details.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-08 12:03:48 +09:00
Denton Liu
ad6dad0996 *.[ch]: manually align parameter lists
In previous patches, extern was mechanically removed from function
declarations without care to formatting, causing parameter lists to be
misaligned. Manually format changed sections such that the parameter
lists should be realigned.

Viewing this patch with 'git diff -w' should produce no output.

Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-05 15:20:10 +09:00
Denton Liu
b199d7147a *.[ch]: remove extern from function declarations using sed
There has been a push to remove extern from function declarations.
Finish the job by removing all instances of "extern" for function
declarations in headers using sed.

This was done by running the following on my system with sed 4.2.2:

    $ git ls-files \*.{c,h} |
        grep -v ^compat/ |
        xargs sed -i'' -e 's/^\(\s*\)extern \([^(]*([^*]\)/\1\2/'

Files under `compat/` are intentionally excluded as some are directly
copied from external sources and we should avoid churning them as much
as possible.

Then, leftover instances of extern were found by running

    $ git grep -w -C3 extern \*.{c,h}

and manually checking the output. No other instances were found.

Note that the regex used specifically excludes function variables which
_should_ be left as extern.

Not the most elegant way to do it but it gets the job done.

Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-05 15:20:08 +09:00
Denton Liu
554544276a *.[ch]: remove extern from function declarations using spatch
There has been a push to remove extern from function declarations.
Remove some instances of "extern" for function declarations which are
caught by Coccinelle. Note that Coccinelle has some difficulty with
processing functions with `__attribute__` or varargs so some `extern`
declarations are left behind to be dealt with in a future patch.

This was the Coccinelle patch used:

	@@
	type T;
	identifier f;
	@@
	- extern
	  T f(...);

and it was run with:

	$ git ls-files \*.{c,h} |
		grep -v ^compat/ |
		xargs spatch --sp-file contrib/coccinelle/noextern.cocci --in-place

Files under `compat/` are intentionally excluded as some are directly
copied from external sources and we should avoid churning them as much
as possible.

Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-05 15:20:06 +09:00
Junio C Hamano
5795a75f9b Merge branch 'bp/post-index-change-hook'
A new hook "post-index-change" is called when the on-disk index
file changes, which can help e.g. a virtualized working tree
implementation.

* bp/post-index-change-hook:
  read-cache: add post-index-change hook
2019-04-25 16:41:11 +09:00
Junio C Hamano
e36adf7122 Merge branch 'ps/stash-in-c'
"git stash" rewritten in C.

* ps/stash-in-c: (28 commits)
  tests: add a special setup where stash.useBuiltin is off
  stash: optionally use the scripted version again
  stash: add back the original, scripted `git stash`
  stash: convert `stash--helper.c` into `stash.c`
  stash: replace all `write-tree` child processes with API calls
  stash: optimize `get_untracked_files()` and `check_changes()`
  stash: convert save to builtin
  stash: make push -q quiet
  stash: convert push to builtin
  stash: convert create to builtin
  stash: convert store to builtin
  stash: convert show to builtin
  stash: convert list to builtin
  stash: convert pop to builtin
  stash: convert branch to builtin
  stash: convert drop and clear to builtin
  stash: convert apply to builtin
  stash: mention options in `show` synopsis
  stash: add tests for `git stash show` config
  stash: rename test cases to be more descriptive
  ...
2019-04-22 11:14:43 +09:00
Nguyễn Thái Ngọc Duy
0daf7ff6c0 sha1-name.c: remove the_repo from get_oid_mb()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-16 18:56:53 +09:00
Nguyễn Thái Ngọc Duy
65e5046400 sha1-name.c: remove the_repo from other get_oid_*
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-16 18:56:53 +09:00
Nguyễn Thái Ngọc Duy
e270f42c4d sha1-name.c: remove the_repo from maybe_die_on_misspelt_object_name
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-16 18:56:53 +09:00
Nguyễn Thái Ngọc Duy
ec580eaaa3 sha1-name.c: add repo_get_oid()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-16 18:56:53 +09:00
Nguyễn Thái Ngọc Duy
2b1790f5ab sha1-name.c: remove the_repo from get_oid_1()
There is a cyclic dependency between one of these functions so they
cannot be converted one by one, so all related functions are converted
at once.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-16 18:56:53 +09:00
Nguyễn Thái Ngọc Duy
4e99f2dbea sha1-name.c: add repo_for_each_abbrev()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-16 18:56:52 +09:00
Nguyễn Thái Ngọc Duy
8bb95572b0 sha1-name.c: add repo_find_unique_abbrev_r()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-16 18:56:52 +09:00
Nguyễn Thái Ngọc Duy
8f56e9d4ba refs.c: remove the_repo from substitute_branch_name()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-08 17:26:32 +09:00
Elijah Newren
5ec1e72823 Use 'unsigned short' for mode, like diff_filespec does
struct diff_filespec defines mode to be an 'unsigned short'.  Several
other places in the API which we'd like to interact with using a
diff_filespec used a plain unsigned (or unsigned int).  This caused
problems when taking addresses, so switch to unsigned short.

Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-08 16:02:07 +09:00
Junio C Hamano
6b5688b760 Merge branch 'ma/clear-repository-format'
The setup code has been cleaned up to avoid leaks around the
repository_format structure.

* ma/clear-repository-format:
  setup: fix memory leaks with `struct repository_format`
  setup: free old value before setting `work_tree`
2019-03-20 15:16:07 +09:00
Junio C Hamano
32038fef00 Merge branch 'jh/trace2'
A more structured way to obtain execution trace has been added.

* jh/trace2:
  trace2: add for_each macros to clang-format
  trace2: t/helper/test-trace2, t0210.sh, t0211.sh, t0212.sh
  trace2:data: add subverb for rebase
  trace2:data: add subverb to reset command
  trace2:data: add subverb to checkout command
  trace2:data: pack-objects: add trace2 regions
  trace2:data: add trace2 instrumentation to index read/write
  trace2:data: add trace2 hook classification
  trace2:data: add trace2 transport child classification
  trace2:data: add trace2 sub-process classification
  trace2:data: add editor/pager child classification
  trace2:data: add trace2 regions to wt-status
  trace2: collect Windows-specific process information
  trace2: create new combined trace facility
  trace2: Documentation/technical/api-trace2.txt
2019-03-07 09:59:56 +09:00
Junio C Hamano
4e021dc28e Merge branch 'wh/author-committer-ident-config'
Four new configuration variables {author,committer}.{name,email}
have been introduced to override user.{name,email} in more specific
cases.

* wh/author-committer-ident-config:
  config: allow giving separate author and committer idents
2019-03-07 09:59:53 +09:00
Junio C Hamano
7d0c1f4556 Merge branch 'tg/checkout-no-overlay'
"git checkout --no-overlay" can be used to trigger a new mode of
checking out paths out of the tree-ish, that allows paths that
match the pathspec that are in the current index and working tree
and are not in the tree-ish.

* tg/checkout-no-overlay:
  revert "checkout: introduce checkout.overlayMode config"
  checkout: introduce checkout.overlayMode config
  checkout: introduce --{,no-}overlay option
  checkout: factor out mark_cache_entry_for_checkout function
  checkout: clarify comment
  read-cache: add invalidate parameter to remove_marked_cache_entries
  entry: support CE_WT_REMOVE flag in checkout_entry
  entry: factor out unlink_entry function
  move worktree tests to t24*
2019-03-07 09:59:51 +09:00
Thomas Gummerer
0640897dc5 ident: don't require calling prepare_fallback_ident first
In fd5a58477c ("ident: add the ability to provide a "fallback
identity"", 2019-02-25) I made it a requirement to call
prepare_fallback_ident as the first function in the ident API.
However in stash we didn't actually end up following that.

This leads to a BUG if user.email and user.name are set.  It was not
caught in the test suite because we only rely on environment variables
for setting the user name and email instead of the config.

Instead of making it a bug to call other functions in the ident API
first, just return silently if the identity of a user was already set
up.

Reported-by: Denton Liu <liu.denton@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-07 09:41:40 +09:00
Martin Ågren
e8805af1c3 setup: fix memory leaks with struct repository_format
After we set up a `struct repository_format`, it owns various pieces of
allocated memory. We then either use those members, because we decide we
want to use the "candidate" repository format, or we discard the
candidate / scratch space. In the first case, we transfer ownership of
the memory to a few global variables. In the latter case, we just
silently drop the struct and end up leaking memory.

Introduce an initialization macro `REPOSITORY_FORMAT_INIT` and a
function `clear_repository_format()`, to be used on each side of
`read_repository_format()`. To have a clear and simple memory ownership,
let all users of `struct repository_format` duplicate the strings that
they take from it, rather than stealing the pointers.

Call `clear_...()` at the start of `read_...()` instead of just zeroing
the struct, since we sometimes enter the function multiple times. Thus,
it is important to initialize the struct before calling `read_...()`, so
document that. It's also important because we might not even call
`read_...()` before we call `clear_...()`, see, e.g., builtin/init-db.c.

Teach `read_...()` to clear the struct on error, so that it is reset to
a safe state, and document this. (In `setup_git_directory_gently()`, we
look at `repo_fmt.hash_algo` even if `repo_fmt.version` is -1, which we
weren't actually supposed to do per the API. After this commit, that's
ok.)

We inherit the existing code's combining "error" and "no version found".
Both are signalled through `version == -1` and now both cause us to
clear any partial configuration we have picked up. For "extensions.*",
that's fine, since they require a positive version number. For
"core.bare" and "core.worktree", we're already verifying that we have a
non-negative version number before using them.

Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-01 08:52:00 +09:00
Johannes Schindelin
fd5a58477c ident: add the ability to provide a "fallback identity"
In 3bc2111fc2 (stash: tolerate missing user identity, 2018-11-18),
`git stash` learned to provide a fallback identity for the case that no
proper name/email was given (and `git stash` does not really care about
a correct identity anyway, but it does want to create a commit object).

In preparation for the same functionality in the upcoming built-in
version of `git stash`, let's offer the same functionality as an API
function.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
[tg: add docs; make it a bug to call the function before other
functions in the ident API]
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-01 08:03:46 +09:00
Paul-Sebastian Ungureanu
f5116f43f6 sha1-name.c: add get_oidf() which acts like get_oid()
Compared to `get_oid()`, `get_oidf()` has as parameters
a pointer to `object_id`, a printf format string and
additional arguments. This will help simplify the code
in subsequent commits.

Original-idea-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-03-01 08:03:46 +09:00
Jeff Hostetler
ee4512ed48 trace2: create new combined trace facility
Create a new unified tracing facility for git.  The eventual intent is to
replace the current trace_printf* and trace_performance* routines with a
unified set of git_trace2* routines.

In addition to the usual printf-style API, trace2 provides higer-level
event verbs with fixed-fields allowing structured data to be written.
This makes post-processing and analysis easier for external tools.

Trace2 defines 3 output targets.  These are set using the environment
variables "GIT_TR2", "GIT_TR2_PERF", and "GIT_TR2_EVENT".  These may be
set to "1" or to an absolute pathname (just like the current GIT_TRACE).

* GIT_TR2 is intended to be a replacement for GIT_TRACE and logs command
  summary data.

* GIT_TR2_PERF is intended as a replacement for GIT_TRACE_PERFORMANCE.
  It extends the output with columns for the command process, thread,
  repo, absolute and relative elapsed times.  It reports events for
  child process start/stop, thread start/stop, and per-thread function
  nesting.

* GIT_TR2_EVENT is a new structured format. It writes event data as a
  series of JSON records.

Calls to trace2 functions log to any of the 3 output targets enabled
without the need to call different trace_printf* or trace_performance*
routines.

Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-02-22 15:27:59 -08:00
Ben Peart
1956ecd0ab read-cache: add post-index-change hook
Add a post-index-change hook that is invoked after the index is written in
do_write_locked_index().

This hook is meant primarily for notification, and cannot affect
the outcome of git commands that trigger the index write.

The hook is passed a flag to indicate whether the working directory was
updated or not and a flag indicating if a skip-worktree bit could have
changed.  These flags enable the hook to optimize its response to the
index change notification.

Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-02-15 11:00:33 -08:00
Junio C Hamano
cba595ab1a Merge branch 'jk/loose-object-cache-oid'
Code clean-up.

* jk/loose-object-cache-oid:
  prefer "hash mismatch" to "sha1 mismatch"
  sha1-file: avoid "sha1 file" for generic use in messages
  sha1-file: prefer "loose object file" to "sha1 file" in messages
  sha1-file: drop has_sha1_file()
  convert has_sha1_file() callers to has_object_file()
  sha1-file: convert pass-through functions to object_id
  sha1-file: modernize loose header/stream functions
  sha1-file: modernize loose object file functions
  http: use struct object_id instead of bare sha1
  update comment references to sha1_object_info()
  sha1-file: fix outdated sha1 comment references
2019-02-06 22:05:27 -08:00
Junio C Hamano
ecbe1beb8e Merge branch 'lt/date-human'
A new date format "--date=human" that morphs its output depending
on how far the time is from the current time has been introduced.
"--date=auto" can be used to use this new format when the output is
going to the pager or to the terminal and otherwise the default
format.

* lt/date-human:
  Add `human` date format tests.
  Add `human` format to test-tool
  Add 'human' date format documentation
  Replace the proposed 'auto' mode with 'auto:'
  Add 'human' date format
2019-02-06 22:05:24 -08:00
Junio C Hamano
b2fc9d2fb0 Merge branch 'jk/unused-parameter-cleanup'
Code cleanup.

* jk/unused-parameter-cleanup:
  convert: drop path parameter from actual conversion functions
  convert: drop len parameter from conversion checks
  config: drop unused parameter from maybe_remove_section()
  show_date_relative(): drop unused "tz" parameter
  column: drop unused "opts" parameter in item_length()
  create_bundle(): drop unused "header" parameter
  apply: drop unused "def" parameter from find_name_gnu()
  match-trees: drop unused path parameter from score functions
2019-02-06 22:05:23 -08:00
Junio C Hamano
7589e63648 Merge branch 'nd/the-index-final'
The assumption to work on the single "in-core index" instance has
been reduced from the library-ish part of the codebase.

* nd/the-index-final:
  cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
  read-cache.c: remove the_* from index_has_changes()
  merge-recursive.c: remove implicit dependency on the_repository
  merge-recursive.c: remove implicit dependency on the_index
  sha1-name.c: remove implicit dependency on the_index
  read-cache.c: replace update_index_if_able with repo_&
  read-cache.c: kill read_index()
  checkout: avoid the_index when possible
  repository.c: replace hold_locked_index() with repo_hold_locked_index()
  notes-utils.c: remove the_repository references
  grep: use grep_opt->repo instead of explict repo argument
2019-02-06 22:05:23 -08:00
Junio C Hamano
09a9c1f427 Merge branch 'tt/bisect-in-c'
More code in "git bisect" has been rewritten in C.

* tt/bisect-in-c:
  bisect--helper: `bisect_start` shell function partially in C
  bisect--helper: `get_terms` & `bisect_terms` shell function in C
  bisect--helper: `bisect_next_check` shell function in C
  bisect--helper: `check_and_set_terms` shell function in C
  wrapper: move is_empty_file() and rename it as is_empty_or_missing_file()
  bisect--helper: `bisect_write` shell function in C
  bisect--helper: `bisect_reset` shell function in C
2019-02-06 22:05:22 -08:00
Junio C Hamano
cfd9167c15 Merge branch 'dt/cat-file-batch-ambiguous'
"git cat-file --batch" reported a dangling symbolic link by
mistake, when it wanted to report that a given name is ambiguous.

* dt/cat-file-batch-ambiguous:
  t1512: test ambiguous cat-file --batch and --batch-output
  Do not print 'dangling' for cat-file in case of ambiguity
2019-02-06 22:05:21 -08:00
Junio C Hamano
1c418243a5 Merge branch 'jk/add-ignore-errors-bit-assignment-fix'
"git add --ignore-errors" did not work as advertised and instead
worked as an unintended synonym for "git add --renormalize", which
has been fixed.

* jk/add-ignore-errors-bit-assignment-fix:
  add: use separate ADD_CACHE_RENORMALIZE flag
2019-02-05 14:26:13 -08:00
William Hubbs
39ab4d0951 config: allow giving separate author and committer idents
The author.email, author.name, committer.email and committer.name
settings are analogous to the GIT_AUTHOR_* and GIT_COMMITTER_*
environment variables, but for the git config system. This allows them
to be set separately for each repository.

Git supports setting different authorship and committer
information with environment variables. However, environment variables
are set in the shell, so if different authorship and committer
information is needed for different repositories an external tool is
required.

This adds support to git config for author.email, author.name,
committer.email and committer.name  settings so this information
can be set per repository.

Also, it generalizes the fmt_ident function so it can handle author vs
committer identification.

Signed-off-by: William Hubbs <williamh@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-02-04 12:18:13 -08:00
Junio C Hamano
371820d5f1 Merge branch 'bc/tree-walk-oid'
The code to walk tree objects has been taught that we may be
working with object names that are not computed with SHA-1.

* bc/tree-walk-oid:
  cache: make oidcpy always copy GIT_MAX_RAWSZ bytes
  tree-walk: store object_id in a separate member
  match-trees: use hashcpy to splice trees
  match-trees: compute buffer offset correctly when splicing
  tree-walk: copy object ID before use
2019-01-29 12:47:56 -08:00
Junio C Hamano
33e4ae9c50 Merge branch 'bc/sha-256'
Add sha-256 hash and plug it through the code to allow building Git
with the "NewHash".

* bc/sha-256:
  hash: add an SHA-256 implementation using OpenSSL
  sha256: add an SHA-256 implementation using libgcrypt
  Add a base implementation of SHA-256 support
  commit-graph: convert to using the_hash_algo
  t/helper: add a test helper to compute hash speed
  sha1-file: add a constant for hash block size
  t: make the sha1 test-tool helper generic
  t: add basic tests for our SHA-1 implementation
  cache: make hashcmp and hasheq work with larger hashes
  hex: introduce functions to print arbitrary hashes
  sha1-file: provide functions to look up hash algorithms
  sha1-file: rename algorithm to "sha1"
2019-01-29 12:47:55 -08:00
Stephen P. Smith
b841d4ff43 Add human format to test-tool
Add the human format support to the test tool so that
GIT_TEST_DATE_NOW can be used to specify the current time.

The get_time() helper function was created and and checks the
GIT_TEST_DATE_NOW environment variable.  If GIT_TEST_DATE_NOW is set,
then that date is used instead of the date returned by by
gettimeofday().

All calls to gettimeofday() were replaced by calls to get_time().

Renamed occurances of TEST_DATE_NOW to GIT_TEST_DATE_NOW since the
variable is now used in the get binary and not just in the test-tool.

Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-29 09:40:08 -08:00
Jeff King
3d42034a18 show_date_relative(): drop unused "tz" parameter
The timestamp we receive is in epoch time, so there's no need for a
timezone parameter to interpret it. The matching show_date() uses "tz"
to show dates in author local time, but relative dates show only the
absolute time difference. The author's location is irrelevant, barring
relativistic effects from using Git close to the speed of light.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-24 12:35:44 -08:00
Nguyễn Thái Ngọc Duy
f8adbec9fe cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
By default, index compat macros are off from now on, because they
could hide the_index dependency.

Only those in builtin can use it.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-24 11:55:06 -08:00
David Turner
d1dd94b308 Do not print 'dangling' for cat-file in case of ambiguity
The return values -1 and -2 from get_oid could mean two different
things, depending on whether they were from an enum returned by
get_tree_entry_follow_symlinks, or from a different code path.  This
caused 'dangling' to be printed from a git cat-file in the case of an
ambiguous (-2) result.

Unify the results of get_oid* and get_tree_entry_follow_symlinks to be
one common type, with unambiguous values.

Signed-off-by: David Turner <novalis@novalis.org>
Reported-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-18 15:22:02 -08:00
Linus Torvalds
acdd37769d Add 'human' date format
This adds --date=human, which skips the timezone if it matches the
current time-zone, and doesn't print the whole date if that matches (ie
skip printing year for dates that are "this year", but also skip the
whole date itself if it's in the last few days and we can just say what
weekday it was).

For really recent dates (same day), use the relative date stamp, while
for old dates (year doesn't match), don't bother with time and timezone.

Also add 'auto' date mode, which defaults to human if we're using the
pager.  So you can do

	git config --add log.date auto

and your "git log" commands will show the human-legible format unless
you're scripting things.

Note that this time format still shows the timezone for recent enough
events (but not so recent that they show up as relative dates).  You can
combine it with the "-local" suffix to never show timezones for an even
more simplified view.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-18 10:31:23 -08:00
Jeff King
9e5da3d055 add: use separate ADD_CACHE_RENORMALIZE flag
Commit 9472935d81 (add: introduce "--renormalize", 2017-11-16) taught
git-add to pass HASH_RENORMALIZE to add_to_index(), which then passes
the flag along to index_path(). However, the flags taken by
add_to_index() and the ones taken by index_path() are distinct
namespaces. We cannot take HASH_* flags in add_to_index(), because they
overlap with the ADD_CACHE_* flags we already take (in this case,
HASH_RENORMALIZE conflicts with ADD_CACHE_IGNORE_ERRORS).

We can solve this by adding a new ADD_CACHE_RENORMALIZE flag, and using
it to set HASH_RENORMALIZE within add_to_index(). In order to make it
clear that these two flags come from distinct sets, let's also change
the name "newflags" in the function to "hash_flags".

Reported-by: Dmitriy Smirnov <dmitriy.smirnov@jetbrains.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-17 13:40:21 -08:00
brian m. carlson
974e4a85e3 cache: make oidcpy always copy GIT_MAX_RAWSZ bytes
There are some situations in which we want to store an object ID into
struct object_id without the_hash_algo necessarily being set correctly.
One such case is when cloning a repository, where we must read refs from
the remote side without having a repository from which to read the
preferred algorithm.

In this cases, we may have the_hash_algo set to SHA-1, which is the
default, but read refs into struct object_id that are SHA-256. When
copying these values, we will want to copy them completely, not just the
first 20 bytes. Consequently, make sure that oidcpy copies the maximum
number of bytes at all times, regardless of the setting of
the_hash_algo.

Since oidcpy and hashcpy are no longer functionally identical, remove
the Cocinelle object_id transformations that convert from one into the
other.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-15 09:57:41 -08:00
Nguyễn Thái Ngọc Duy
150fe065f7 read-cache.c: remove the_* from index_has_changes()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-14 12:13:05 -08:00
Nguyễn Thái Ngọc Duy
3a7a698e93 sha1-name.c: remove implicit dependency on the_index
This kills the_index dependency in get_oid_with_context() but for
get_oid() and friends, they still assume the_repository (which also
means the_index).

Unfortunately the widespread use of get_oid() will make it hard to
make the conversion now. We probably will add repo_get_oid() at some
point and limit the use of get_oid() in builtin/ instead of forcing
all get_oid() call sites to carry struct repository.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-14 12:13:04 -08:00
Nguyễn Thái Ngọc Duy
1b0d968b34 read-cache.c: replace update_index_if_able with repo_&
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-14 12:13:04 -08:00
Nguyễn Thái Ngọc Duy
e1ff0a32e4 read-cache.c: kill read_index()
read_index() shares the same problem as hold_locked_index(): it
assumes $GIT_DIR/index. Move all call sites to repo_read_index()
instead. read_index_preload() and read_index_unmerged() are also
killed as a consequence.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-14 12:13:04 -08:00
Nguyễn Thái Ngọc Duy
3a95f31d1c repository.c: replace hold_locked_index() with repo_hold_locked_index()
hold_locked_index() assumes the index path at $GIT_DIR/index. This is
not good for places that take an arbitrary index_state instead of
the_index, which is basically everywhere except builtin/.

Replace it with repo_hold_locked_index(). hold_locked_index() remains
as a wrapper around repo_hold_locked_index() to reduce changes in builtin/

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-14 12:13:04 -08:00
Jeff King
00a7760e81 sha1-file: modernize loose header/stream functions
As with the open/map/close functions for loose objects that were
recently converted, the functions for parsing the loose object stream
use the name "sha1" and a bare "unsigned char *". Let's fix that so that
unpack_sha1_header() becomes unpack_loose_header(), etc.

These conversions are less clear-cut than the file access functions.
You could argue that the they are parsing Git's canonical object format
(i.e., "type size\0contents", over which we compute the hash), which is
not strictly tied to loose storage. But in practice these functions are
used only for loose objects, and using the term "loose_header" (instead
of "object_header") distinguishes it from the object header found in
packfiles (which contains the same information in a different format).

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-08 09:40:19 -08:00
Jeff King
c93206b412 update comment references to sha1_object_info()
Commit abef9020e3 (sha1_file: convert sha1_object_info* to object_id,
2018-03-12) renamed the function to oid_object_info(), but missed some
comments which mention it.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-08 09:40:19 -08:00
Thomas Gummerer
6fdc205722 read-cache: add invalidate parameter to remove_marked_cache_entries
When marking cache entries for removal, and later removing them all at
once using 'remove_marked_cache_entries()', cache entries currently
have to be invalidated manually in the cache tree and in the untracked
cache.

Add an invalidate flag to the function.  With the flag set, the
function will take care of invalidating the path in the cache tree and
in the untracked cache.

Note that the current callsites already do the invalidation properly
in other places, so we're just passing 0 from there to keep the status
quo.

This will be useful in a subsequent commit.

Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-02 15:28:05 -08:00
Thomas Gummerer
b702dd12d5 entry: factor out unlink_entry function
Factor out the 'unlink_entry()' function from unpack-trees.c to
entry.c.  It will be used in other places as well in subsequent
steps.

As it's no longer a static function, also move the documentation to
the header file to make it more discoverable.

Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-02 15:28:05 -08:00
Pranit Bauva
e3b1e3bdc0 wrapper: move is_empty_file() and rename it as is_empty_or_missing_file()
is_empty_file() can help to refactor a lot of code. This will be very
helpful in porting "git bisect" to C.

Suggested-by: Torsten Bögershausen <tboegi@web.de>
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-01-02 10:23:02 -08:00
brian m. carlson
13eeedb5d1 Add a base implementation of SHA-256 support
SHA-1 is weak and we need to transition to a new hash function.  For
some time, we have referred to this new function as NewHash.  Recently,
we decided to pick SHA-256 as NewHash.  The reasons behind the choice of
SHA-256 are outlined in the thread starting at [1] and in the commit
history for the hash function transition document.

Add a basic implementation of SHA-256 based off libtomcrypt, which is in
the public domain.  Optimize it and restructure it to meet our coding
standards.  Pull in the update and final functions from the SHA-1 block
implementation, as we know these function correctly with all compilers.
This implementation is slower than SHA-1, but more performant
implementations will be introduced in future commits.

Wire up SHA-256 in the list of hash algorithms, and add a test that the
algorithm works correctly.

Note that with this patch, it is still not possible to switch to using
SHA-256 in Git.  Additional patches are needed to prepare the code to
handle a larger hash algorithm and further test fixes are needed.

[1] https://public-inbox.org/git/20180609224913.GC38834@genre.crustytoothpaste.net/

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-14 16:54:53 +09:00
brian m. carlson
a2ce0a7526 sha1-file: add a constant for hash block size
There is one place we need the hash algorithm block size: the HMAC code
for push certs.  Expose this constant in struct git_hash_algo and expose
values for SHA-1 and for the largest value of any hash.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-14 16:54:52 +09:00
brian m. carlson
0dab7129ab cache: make hashcmp and hasheq work with larger hashes
In 183a638b7d ("hashcmp: assert constant hash size", 2018-08-23), we
modified hashcmp to assert that the hash size was always 20 to help it
optimize and inline calls to memcmp.  In a future series, we replaced
many calls to hashcmp and oidcmp with calls to hasheq and oideq to
improve inlining further.

However, we want to support hash algorithms other than SHA-1, namely
SHA-256.  When doing so, we must handle the case where these values are
32 bytes long as well as 20.  Adjust hashcmp to handle two cases:
20-byte matches, and maximum-size matches.  Therefore, when we include
SHA-256, we'll automatically handle it properly, while at the same time
teaching the compiler that there are only two possible options to
consider.  This will allow the compiler to write the most efficient
possible code.

Copy similar code into hasheq and perform an identical transformation.
At least with GCC 8.2.0, making hasheq defer to hashcmp when there are
two branches prevents the compiler from inlining the comparison, while
the code in this patch is inlined properly.  Add a comment to avoid an
accidental performance regression from well-intentioned refactoring.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-14 16:54:52 +09:00
brian m. carlson
47edb64997 hex: introduce functions to print arbitrary hashes
Currently, we have functions that turn an arbitrary SHA-1 value or an
object ID into hex format, either using a static buffer or with a
user-provided buffer.  Add variants of these functions that can handle
an arbitrary hash algorithm, specified by constant.  Update the
documentation as well.

While we're at it, remove the "extern" declaration from this family of
functions, since it's not needed and our style now recommends against
it.

We use the variant taking the algorithm structure pointer as the
internal variant, since taking an algorithm pointer is the easiest way
to handle all of the variants in use.

Note that we maintain these functions because there are hashes which
must change based on the hash algorithm in use but are not object IDs
(such as pack checksums).

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-14 16:54:52 +09:00
Nguyễn Thái Ngọc Duy
0f086e6dca checkout: print something when checking out paths
One of the problems with "git checkout" is that it does so many
different things and could confuse people specially when we fail to
handle ambiguation correctly.

One way to help with that is tell the user what sort of operation is
actually carried out. When switching branches, we always print
something unless --quiet, either

 - "HEAD is now at ..."
 - "Reset branch ..."
 - "Already on ..."
 - "Switched to and reset ..."
 - "Switched to a new branch ..."
 - "Switched to branch ..."

Checking out paths however is silent. Print something so that if we
got the user intention wrong, they won't waste too much time to find
that out. For the remaining cases of checkout we now print either

 - "Checked out ... paths out of the index"
 - "Checked out ... paths out of <abbrev hash>"

Since the purpose of printing this is to help disambiguate. Only do it
when "--" is missing.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-14 15:10:35 +09:00
Junio C Hamano
11aa560de9 Merge branch 'bp/refresh-index-using-preload'
The helper function to refresh the cached stat information in the
in-core index has learned to perform the lstat() part of the
operation in parallel on multi-core platforms.

* bp/refresh-index-using-preload:
  refresh_index: remove unnecessary calls to preload_index()
  speed up refresh_index() by utilizing preload_index()
2018-11-13 22:37:26 +09:00
Junio C Hamano
abb4824d13 Merge branch 'ao/submodule-wo-gitmodules-checked-out'
The submodule support has been updated to read from the blob at
HEAD:.gitmodules when the .gitmodules file is missing from the
working tree.

* ao/submodule-wo-gitmodules-checked-out:
  t/helper: add test-submodule-nested-repo-config
  submodule: support reading .gitmodules when it's not in the working tree
  submodule: add a helper to check if it is safe to write to .gitmodules
  t7506: clean up .gitmodules properly before setting up new scenario
  submodule: use the 'submodule--helper config' command
  submodule--helper: add a new 'config' subcommand
  t7411: be nicer to future tests and really clean things up
  t7411: merge tests 5 and 6
  submodule: factor out a config_set_in_gitmodules_file_gently function
  submodule: add a print_config_from_gitmodules() helper
2018-11-13 22:37:22 +09:00
Junio C Hamano
6c268fdda9 Merge branch 'js/mingw-perl5lib'
Windows fix.

* js/mingw-perl5lib:
  mingw: unset PERL5LIB by default
  config: move Windows-specific config settings into compat/mingw.c
  config: allow for platform-specific core.* config settings
  config: rename `dummy` parameter to `cb` in git_default_config()
2018-11-13 22:37:20 +09:00
Junio C Hamano
8c758f9a67 Merge branch 'nd/per-worktree-config'
A fourth class of configuration files (in addition to the
traditional "system wide", "per user in the $HOME directory" and
"per repository in the $GIT_DIR/config") has been introduced so
that different worktrees that share the same repository (hence the
same $GIT_DIR/config file) can use different customization.

* nd/per-worktree-config:
  worktree: add per-worktree config files
  t1300: extract and use test_cmp_config()
2018-11-13 22:37:18 +09:00
Junio C Hamano
b49ef560ed Merge branch 'ag/rebase-i-in-c'
Rewrite of the remaining "rebase -i" machinery in C.

* ag/rebase-i-in-c:
  rebase -i: move rebase--helper modes to rebase--interactive
  rebase -i: remove git-rebase--interactive.sh
  rebase--interactive2: rewrite the submodes of interactive rebase in C
  rebase -i: implement the main part of interactive rebase as a builtin
  rebase -i: rewrite init_basic_state() in C
  rebase -i: rewrite write_basic_state() in C
  rebase -i: rewrite the rest of init_revisions_and_shortrevisions() in C
  rebase -i: implement the logic to initialize $revisions in C
  rebase -i: remove unused modes and functions
  rebase -i: rewrite complete_action() in C
  t3404: todo list with commented-out commands only aborts
  sequencer: change the way skip_unnecessary_picks() returns its result
  sequencer: refactor append_todo_help() to write its message to a buffer
  rebase -i: rewrite checkout_onto() in C
  rebase -i: rewrite setup_reflog_action() in C
  sequencer: add a new function to silence a command, except if it fails
  rebase -i: rewrite the edit-todo functionality in C
  editor: add a function to launch the sequence editor
  rebase -i: rewrite append_todo_help() in C
  sequencer: make three functions and an enum from sequencer.c public
2018-11-02 11:04:53 +09:00
Johannes Schindelin
bdfbb0ea93 config: move Windows-specific config settings into compat/mingw.c
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-31 12:46:27 +09:00
Ben Peart
99ce720c33 speed up refresh_index() by utilizing preload_index()
Speed up refresh_index() by utilizing preload_index() to do most of the work
spread across multiple threads.  This works because most cache entries will
get marked CE_UPTODATE so that refresh_cache_ent() can bail out early when
called from within refresh_index().

On a Windows repo with ~200K files, this drops refresh times from 6.64
seconds to 2.87 seconds for a savings of 57%.

Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-30 11:28:39 +09:00
Junio C Hamano
7a43ab6fb2 Merge branch 'sg/split-index-racefix'
The codepath to support the experimental split-index mode had
remaining "racily clean" issues fixed.

* sg/split-index-racefix:
  split-index: BUG() when cache entry refers to non-existing shared entry
  split-index: smudge and add racily clean cache entries to split index
  split-index: don't compare cached data of entries already marked for split index
  split-index: count the number of deleted entries
  t1700-split-index: date back files to avoid racy situations
  split-index: add tests to demonstrate the racy split index problem
  t1700-split-index: document why FSMONITOR is disabled in this test script
2018-10-26 14:22:10 +09:00
Nguyễn Thái Ngọc Duy
58b284a2e9 worktree: add per-worktree config files
A new repo extension is added, worktreeConfig. When it is present:

 - Repository config reading by default includes $GIT_DIR/config _and_
   $GIT_DIR/config.worktree. "config" file remains shared in multiple
   worktree setup.

 - The special treatment for core.bare and core.worktree, to stay
   effective only in main worktree, is gone. These config settings are
   supposed to be in config.worktree.

This extension is most useful in multiple worktree setup because you
now have an option to store per-worktree config (which is either
.git/config.worktree for main worktree, or
.git/worktrees/xx/config.worktree for linked ones).

This extension can be used in single worktree mode, even though it's
pretty much useless (but this can happen after you remove all linked
worktrees and move back to single worktree).

"git config" reads from both "config" and "config.worktree" by default
(i.e. without either --user, --file...) when this extension is
present. Default writes still go to "config", not "config.worktree". A
new option --worktree is added for that (*).

Since a new repo extension is introduced, existing git binaries should
refuse to access to the repo (both from main and linked worktrees). So
they will not misread the config file (i.e. skip the config.worktree
part). They may still accidentally write to the config file anyway if
they use with "git config --file <path>".

This design places a bet on the assumption that the majority of config
variables are shared so it is the default mode. A safer move would be
default writes go to per-worktree file, so that accidental changes are
isolated.

(*) "git config --worktree" points back to "config" file when this
    extension is not present and there is only one worktree so that it
    works in any both single and multiple worktree setups.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-22 13:17:04 +09:00
Junio C Hamano
4d87b38e6c Merge branch 'nd/status-refresh-progress'
"git status" learns to show progress bar when refreshing the index
takes a long time.

* nd/status-refresh-progress:
  status: show progress bar if refreshing the index takes too long
2018-10-19 13:34:03 +09:00
Junio C Hamano
11877b9ebe Merge branch 'nd/the-index'
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".

* nd/the-index: (23 commits)
  revision.c: reduce implicit dependency the_repository
  revision.c: remove implicit dependency on the_index
  ws.c: remove implicit dependency on the_index
  tree-diff.c: remove implicit dependency on the_index
  submodule.c: remove implicit dependency on the_index
  line-range.c: remove implicit dependency on the_index
  userdiff.c: remove implicit dependency on the_index
  rerere.c: remove implicit dependency on the_index
  sha1-file.c: remove implicit dependency on the_index
  patch-ids.c: remove implicit dependency on the_index
  merge.c: remove implicit dependency on the_index
  merge-blobs.c: remove implicit dependency on the_index
  ll-merge.c: remove implicit dependency on the_index
  diff-lib.c: remove implicit dependency on the_index
  read-cache.c: remove implicit dependency on the_index
  diff.c: remove implicit dependency on the_index
  grep.c: remove implicit dependency on the_index
  diff.c: remove the_index dependency in textconv() functions
  blame.c: rename "repo" argument to "r"
  combine-diff.c: remove implicit dependency on the_index
  ...
2018-10-19 13:34:02 +09:00
SZEDER Gábor
5581a019ba split-index: smudge and add racily clean cache entries to split index
Ever since the split index feature was introduced [1], refreshing a
split index is prone to a variant of the classic racy git problem.

Consider the following sequence of commands updating the split index
when the shared index contains a racily clean cache entry, i.e. an
entry whose cached stat data matches with the corresponding file in
the worktree and the cached mtime matches that of the index:

  echo "cached content" >file
  git update-index --split-index --add file
  echo "dirty worktree" >file    # size stays the same!
  # ... wait ...
  git update-index --add other-file

Normally, when a non-split index is updated, then do_write_index()
(the function responsible for writing all kinds of indexes, "regular",
split, and shared) recognizes racily clean cache entries, and writes
them with smudged stat data, i.e. with file size set to 0.  When
subsequent git commands read the index, they will notice that the
smudged stat data doesn't match with the file in the worktree, and
then go on to check the file's content and notice its dirtiness.

In the above example, however, in the second 'git update-index'
prepare_to_write_split_index() decides which cache entries stored only
in the shared index should be replaced in the new split index.  Alas,
this function never looks out for racily clean cache entries, and
since the file's stat data in the worktree hasn't changed since the
shared index was written, it won't be replaced in the new split index.
Consequently, do_write_index() doesn't even get this racily clean
cache entry, and can't smudge its stat data.  Subsequent git commands
will then see that the index has more recent mtime than the file and
that the (not smudged) cached stat data still matches with the file in
the worktree, and, ultimately, will erroneously consider the file
clean.

Modify prepare_to_write_split_index() to recognize racily clean cache
entries, and mark them to be added to the split index.  Note that
there are two places where it should check raciness: first those cache
entries that are only stored in the shared index, and then those that
have been copied by unpack_trees() from the shared index while it
constructed a new index.  This way do_write_index() will get these
racily clean cache entries as well, and will then write them with
smudged stat data to the new split index.

This change makes all tests in 't1701-racy-split-index.sh' pass, so
flip the two 'test_expect_failure' tests to success.  Also add the '#'
(as in nr. of trial) to those tests' description that were omitted
when the tests expected failure.

Note that after this change if the index is split when it contains a
racily clean cache entry, then a smudged cache entry will be written
both to the new shared and to the new split indexes.  This doesn't
affect regular git commands: as far as they are concerned this is just
an entry in the split index replacing an outdated entry in the shared
index.  It did affect a few tests in 't1700-split-index.sh', though,
because they actually check which entries are stored in the split
index; a previous patch in this series has already made the necessary
adjustments in 't1700'.  And racily clean cache entries and index
splitting are rare enough to not worry about the resulting duplicated
smudged cache entries, and the additional complexity required to
prevent them is not worth it.

Several tests failed occasionally when the test suite was run with
'GIT_TEST_SPLIT_INDEX=yes'.  Here are those that I managed to trace
back to this racy split index problem, starting with those failing
more frequently, with a link to a failing Travis CI build job for
each.  The highlighted line [2] shows when the racy file was written,
which is not always in the failing test but in a preceeding setup
test.

  t3903-stash.sh:
    https://travis-ci.org/git/git/jobs/385542084#L5858

  t4024-diff-optimize-common.sh:
    https://travis-ci.org/git/git/jobs/386531969#L3174

  t4015-diff-whitespace.sh:
    https://travis-ci.org/git/git/jobs/360797600#L8215

  t2200-add-update.sh:
    https://travis-ci.org/git/git/jobs/382543426#L3051

  t0090-cache-tree.sh:
    https://travis-ci.org/git/git/jobs/416583010#L3679

There might be others, e.g. perhaps 't1000-read-tree-m-3way.sh' and
others using 'lib-read-tree-m-3way.sh', but I couldn't confirm yet.

[1] In the branch leading to the merge commit v2.1.0-rc0~45 (Merge
    branch 'nd/split-index', 2014-07-16).

[2] Note that those highlighted lines are in the 'after failure' fold,
    and your browser might unhelpfully fold it up before you could
    take a good look.

Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-12 07:23:29 +09:00
Antonio Ospite
b5c259f226 submodule: add a helper to check if it is safe to write to .gitmodules
Introduce a helper function named is_writing_gitmodules_ok() to verify
that the .gitmodules file is safe to write.

The function name follows the scheme of is_staging_gitmodules_ok().

The two symbolic constants GITMODULES_INDEX and GITMODULES_HEAD are used
to get help from the C preprocessor in preventing typos, especially for
future users.

This is in preparation for a future change which teaches git how to read
.gitmodules from the index or from the current branch if the file is not
available in the working tree.

The rationale behind the check is that writing to .gitmodules requires
the file to be present in the working tree, unless a brand new
.gitmodules is being created (in which case the .gitmodules file would
not exist at all: neither in the working tree nor in the index or in the
current branch).

Expose the functionality also via a "submodule-helper config
--check-writeable" command, as git scripts may want to perform the check
before modifying submodules configuration.

Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-09 12:40:21 +09:00
Nguyễn Thái Ngọc Duy
26d024ecf0 ws.c: remove implicit dependency on the_index
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-21 09:51:18 -07:00
Nguyễn Thái Ngọc Duy
58bf2a4cc7 sha1-file.c: remove implicit dependency on the_index
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-21 09:48:11 -07:00
Nguyễn Thái Ngọc Duy
7e196c3a28 merge.c: remove implicit dependency on the_index
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-21 09:48:10 -07:00
Nguyễn Thái Ngọc Duy
92a1bf5a58 read-cache.c: remove 'const' from index_has_changes()
This function calls do_diff_cache() which eventually needs to set this
"istate" to unpack_options->src_index [1]. This is an unfortunate fact
that unpack_trees() _will_ update [2] src_index so we can't really pass a
const index_state there. Just remove 'const'.

[1] Right now diff_cache() in diff-lib.c assigns the_index to
    src_index. But the plan is to get rid of the_index, so it should
    be 'istate' from here that gets assigned to src_index.

[2] Some transient bits in the source index are touched. Optional
    extensions can also be removed. But other than that the source
    tree should still be valid.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-21 09:48:10 -07:00
Junio C Hamano
769af0fd9e Merge branch 'jk/cocci'
spatch transformation to replace boolean uses of !hashcmp() to
newly introduced oideq() is added, and applied, to regain
performance lost due to support of multiple hash algorithms.

* jk/cocci:
  show_dirstat: simplify same-content check
  read-cache: use oideq() in ce_compare functions
  convert hashmap comparison functions to oideq()
  convert "hashcmp() != 0" to "!hasheq()"
  convert "oidcmp() != 0" to "!oideq()"
  convert "hashcmp() == 0" to hasheq()
  convert "oidcmp() == 0" to oideq()
  introduce hasheq() and oideq()
  coccinelle: use <...> for function exclusion
2018-09-17 13:53:57 -07:00
Junio C Hamano
c2407322b6 Merge branch 'nd/clone-case-smashing-warning'
Running "git clone" against a project that contain two files with
pathnames that differ only in cases on a case insensitive
filesystem would result in one of the files lost because the
underlying filesystem is incapable of holding both at the same
time.  An attempt is made to detect such a case and warn.

* nd/clone-case-smashing-warning:
  clone: report duplicate entries on case-insensitive filesystems
2018-09-17 13:53:47 -07:00
Nguyễn Thái Ngọc Duy
ae9af12287 status: show progress bar if refreshing the index takes too long
Refreshing the index is usually very fast, but it can still take a
long time sometimes. Cold cache is one. Or copying a repo to a new
place (*). It's good to show something to let the user know "git
status" is not hanging, it's just busy doing something.

(*) In this case, all stat info in the index becomes invalid and git
    falls back to rehashing all file content to see if there's any
    difference between updating stat info in the index. This is quite
    expensive. Even with a repo as small as git.git, it takes 3
    seconds.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-17 09:38:50 -07:00
Jeff King
e3ff0683e2 convert "hashcmp() == 0" to hasheq()
This is the partner patch to the previous one, but covering
the "hash" variants instead of "oid".  Note that our
coccinelle rule is slightly more complex to avoid triggering
the call in hasheq().

I didn't bother to add a new rule to convert:

  - hasheq(E1->hash, E2->hash)
  + oideq(E1, E2)

Since these are new functions, there won't be any such
existing callers. And since most of the code is already
using oideq, we're not likely to introduce new ones.

We might still see "!hashcmp(E1->hash, E2->hash)" from topics
in flight. But because our new rule comes after the existing
ones, that should first get converted to "!oidcmp(E1, E2)"
and then to "oideq(E1, E2)".

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-29 11:32:49 -07:00
Jeff King
4a7e27e957 convert "oidcmp() == 0" to oideq()
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.

The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).

This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.

I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-29 11:32:49 -07:00
Jeff King
14438c4497 introduce hasheq() and oideq()
The main comparison functions we provide for comparing
object ids are hashcmp() and oidcmp(). These are more
flexible than a strict equality check, since they also
express ordering. That makes them useful for sorting and
binary searching. However, it also makes them potentially
slower than a strict equality check. Consider this C code,
which is traditionally what our hashcmp has looked like:

  #include <string.h>
  int hashcmp(const unsigned char *a, const unsigned char *b)
  {
          return memcmp(a, b, 20);
  }

Compiling with "gcc -O2 -S -fverbose-asm", the generated
assembly shows that we actually call memcmp(). But if we
change this to a strict equality check:

          return !memcmp(a, b, 20);

we get a faster inline version:

          movq    (%rdi), %rax    # MEM[(void *)a_4(D)], MEM[(void *)a_4(D)]
          movq    8(%rdi), %rdx   # MEM[(void *)a_4(D)], tmp101
          xorq    (%rsi), %rax    # MEM[(void *)b_5(D)], tmp94
          xorq    8(%rsi), %rdx   # MEM[(void *)b_5(D)], tmp93
          orq     %rax, %rdx      # tmp94, tmp93
          jne     .L2     #,
          movl    16(%rsi), %eax  # MEM[(void *)b_5(D)], tmp104
          cmpl    %eax, 16(%rdi)  # tmp104, MEM[(void *)a_4(D)]
          je      .L5     #,

Obviously our hashcmp() doesn't include the "!". But because
it's an inline function, optimizing compilers are able to
see "!hashcmp(a,b)" in calling code and take advantage of
this case. So there has been no value thus far in
introducing a more restricted interface for doing strict
equality checks.

But as Git learns about more values for the_hash_algo, our
hashcmp() will grow more complicated and may even delegate
at runtime to functions optimized specifically for that hash
size. That breaks the inline connection we have, and the
compiler will have to assume that the caller really cares
about the sign and magnitude of the memcmp() result, even
though the vast majority don't.

We can solve that by introducing a hasheq() function (and
matching oideq() wrapper), which callers can use to make it
clear that they only care about equality. For now, the
implementation will literally be "!hashcmp()", but it frees
us up later to introduce code optimized specifically for the
equality check.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-29 11:32:49 -07:00
Jeff King
183a638b7d hashcmp: assert constant hash size
Prior to 509f6f62a4 (cache: update object ID functions for
the_hash_algo, 2018-07-16), hashcmp() called memcmp() with a
constant size of 20 bytes. Some compilers were able to turn
that into a few quad-word comparisons, which is faster than
actually calling memcmp().

In 509f6f62a4, we started using the_hash_algo->rawsz
instead. Even though this will always be 20, the compiler
doesn't know that while inlining hashcmp() and ends up just
generating a call to memcmp().

Eventually we'll have to deal with multiple hash sizes, but
for the upcoming v2.19, we can restore some of the original
performance by asserting on the size. That gives the
compiler enough information to know that the memcmp will
always be called with a length of 20, and it performs the
same optimization.

Here are numbers for p0001.2 run against linux.git on a few
versions. This is using -O2 with gcc 8.2.0.

  Test     v2.18.0             v2.19.0-rc0               HEAD
  ------------------------------------------------------------------------------
  0001.2:  34.24(33.81+0.43)   34.83(34.42+0.40) +1.7%   33.90(33.47+0.42) -1.0%

You can see that v2.19 is a little slower than v2.18. This
commit ended up slightly faster than v2.18, but there's a
fair bit of run-to-run noise (the generated code in the two
cases is basically the same). This patch does seem to be
consistently 1-2% faster than v2.19.

I tried changing hashcpy(), which was also touched by
509f6f62a4, in the same way, but couldn't measure any
speedup. Which makes sense, at least for this workload. A
traversal of the whole commit graph requires looking up
every entry of every tree via lookup_object(). That's many
multiples of the numbers of objects in the repository (most
of the lookups just return "yes, we already saw that
object").

[jn: verified using "make object.s" that the memcmp call goes away.]

Reported-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Jeff King <peff@peff.net
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-23 06:20:58 -07:00
Junio C Hamano
5ade034464 Merge branch 'en/incl-forward-decl'
Code hygiene improvement for the header files.

* en/incl-forward-decl:
  Remove forward declaration of an enum
  compat/precompose_utf8.h: use more common include guard style
  urlmatch.h: fix include guard
  Move definition of enum branch_track from cache.h to branch.h
  alloc: make allocate_alloc_state and clear_alloc_state more consistent
  Add missing includes and forward declarations
2018-08-20 12:41:32 -07:00
Junio C Hamano
0c54cdaf65 Merge branch 'jk/for-each-object-iteration'
The API to iterate over all objects learned to optionally list
objects in the order they appear in packfiles, which helps locality
of access if the caller accesses these objects while as objects are
enumerated.

* jk/for-each-object-iteration:
  for_each_*_object: move declarations to object-store.h
  cat-file: use a single strbuf for all output
  cat-file: split batch "buf" into two variables
  cat-file: use oidset check-and-insert
  cat-file: support "unordered" output for --batch-all-objects
  cat-file: rename batch_{loose,packed}_object callbacks
  t1006: test cat-file --batch-all-objects with duplicates
  for_each_packed_object: support iterating in pack-order
  for_each_*_object: give more comprehensive docstrings
  for_each_*_object: take flag arguments as enum
  for_each_*_object: store flag definitions in a single location
2018-08-20 11:33:52 -07:00
Duy Nguyen
b878579ae7 clone: report duplicate entries on case-insensitive filesystems
Paths that only differ in case work fine in a case-sensitive
filesystems, but if those repos are cloned in a case-insensitive one,
you'll get problems. The first thing to notice is "git status" will
never be clean with no indication what exactly is "dirty".

This patch helps the situation a bit by pointing out the problem at
clone time. Even though this patch talks about case sensitivity, the
patch makes no assumption about folding rules by the filesystem. It
simply observes that if an entry has been already checked out at clone
time when we're about to write a new path, some folding rules are
behind this.

In the case that we can't rely on filesystem (via inode number) to do
this check, fall back to fspathcmp() which is not perfect but should
not give false positives.

This patch is tested with vim-colorschemes and Sublime-Gitignore
repositories on a JFS partition with case insensitive support on
Linux.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-17 12:10:37 -07:00
Junio C Hamano
30cf1911e2 Merge branch 'js/vscode'
Add a script (in contrib/) to help users of VSCode work better with
our codebase.

* js/vscode:
  vscode: let cSpell work on commit messages, too
  vscode: add a dictionary for cSpell
  vscode: use 8-space tabs, no trailing ws, etc for Git's source code
  vscode: wrap commit messages at column 72 by default
  vscode: only overwrite C/C++ settings
  mingw: define WIN32 explicitly
  cache.h: extract enum declaration from inside a struct declaration
  vscode: hard-code a couple defines
  contrib: add a script to initialize VS Code configuration
2018-08-15 15:08:26 -07:00
Junio C Hamano
1689c22c1c Merge branch 'jk/core-use-replace-refs'
A new configuration variable core.usereplacerefs has been added,
primarily to help server installations that want to ignore the
replace mechanism altogether.

* jk/core-use-replace-refs:
  add core.usereplacerefs config option
  check_replace_refs: rename to read_replace_refs
  check_replace_refs: fix outdated comment
2018-08-15 15:08:23 -07:00
Elijah Newren
e730b81df6 Move definition of enum branch_track from cache.h to branch.h
'branch_track' feels more closely related to branching, and it is
needed later in branch.h; rather than #include'ing cache.h in branch.h
for this small enum, just move the enum and the external declaration
for git_branch_track to branch.h.

Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-15 11:52:09 -07:00
Jeff King
0889aae1cd for_each_*_object: move declarations to object-store.h
The for_each_loose_object() and for_each_packed_object()
functions are meant to be part of a unified interface: they
use the same set of for_each_object_flags, and it's not
inconceivable that we might one day add a single
for_each_object() wrapper around them.

Let's put them together in a single file, so we can avoid
awkwardness like saying "the flags for this function are
over in cache.h". Moving the loose functions to packfile.h
is silly. Moving the packed functions to cache.h works, but
makes the "cache.h is a kitchen sink" problem worse. The
best place is the recently-created object-store.h, since
these are quite obviously related to object storage.

The for_each_*_in_objdir() functions do not use the same
flags, but they are logically part of the same interface as
for_each_loose_object(), and share callback signatures. So
we'll move those, as well, as they also make sense in
object-store.h.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-14 12:29:57 -07:00
Jeff King
736eb88fdc for_each_packed_object: support iterating in pack-order
We currently iterate over objects within a pack in .idx
order, which uses the object hashes. That means that it
is effectively random with respect to the location of the
object within the pack. If you're going to access the actual
object data, there are two reasons to move linearly through
the pack itself:

  1. It improves the locality of access in the packfile. In
     the cold-cache case, this may mean fewer disk seeks, or
     better usage of disk cache.

  2. We store related deltas together in the packfile. Which
     means that the delta base cache can operate much more
     efficiently if we visit all of those related deltas in
     sequence, as the earlier items are likely to still be
     in the cache.  Whereas if we visit the objects in
     random order, our cache entries are much more likely to
     have been evicted by unrelated deltas in the meantime.

So in general, if you're going to access the object contents
pack order is generally going to end up more efficient.

But if you're simply generating a list of object names, or
if you're going to end up sorting the result anyway, you're
better off just using the .idx order, as finding the pack
order means generating the in-memory pack-revindex.
According to the numbers in 8b8dfd5132 (pack-revindex:
radix-sort the revindex, 2013-07-11), that takes about 200ms
for linux.git, and 20ms for git.git (those numbers are a few
years old but are still a good ballpark).

That makes it a good optimization for some cases (we can
save tens of seconds in git.git by having good locality of
delta access, for a 20ms cost), but a bad one for others
(e.g., right now "cat-file --batch-all-objects
--batch-check="%(objectname)" is 170ms in git.git, so adding
20ms to that is noticeable).

Hence this patch makes it an optional flag. You can't
actually do any interesting timings yet, as it's not plumbed
through to any user-facing tools like cat-file. That will
come in a later patch.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-13 13:48:28 -07:00
Jeff King
8b36155190 for_each_*_object: give more comprehensive docstrings
We already mention the local/alternate behavior of these
functions, but we can help clarify a few other behaviors:

 - there's no need to mention LOCAL_ONLY specifically, since
   we already reference the flags by type (and as we add
   more flags, we don't want to have to mention each)

 - clarify that reachability doesn't matter here; this is
   all accessible objects

 - what ordering/uniqueness guarantees we give

 - how pack-specific flags are handled for the loose case

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-13 13:48:26 -07:00
Jeff King
a7ff6f5a0f for_each_*_object: take flag arguments as enum
It's not wrong to pass our flags in an "unsigned", as we
know it will be at least as large as the enum.  However,
using the enum in the declaration makes it more obvious
where to find the list of flags.

While we're here, let's also drop the "extern" noise-words
from the declarations, per our modern coding style.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-13 13:48:25 -07:00
Jeff King
202e7f1e16 for_each_*_object: store flag definitions in a single location
These flags were split between cache.h and packfile.h,
because some of the flags apply only to packs. However, they
share a single numeric namespace, since both are respected
for the packed variant. Let's make sure they're defined
together so that nobody accidentally adds a new flag in one
location that duplicates the other.

While we're here, let's also put them in an enum (which
helps debugger visibility) and use "(1<<n)" rather than
counting powers of 2 manually.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-13 13:47:50 -07:00
Alban Gruin
2aed01811d editor: add a function to launch the sequence editor
As part of the rewrite of interactive rebase, the sequencer will need to
open the sequence editor to allow the user to edit the todo list.
Instead of duplicating the existing launch_editor() function, this
refactors it to a new function, launch_specified_editor(), which takes
the editor as a parameter, in addition to the path, the buffer and the
environment variables.  launch_sequence_editor() is then added to launch
the sequence editor.

Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-10 11:56:22 -07:00
Junio C Hamano
78a72ad4f8 Merge branch 'jt/commit-graph-per-object-store'
The singleton commit-graph in-core instance is made per in-core
repository instance.

* jt/commit-graph-per-object-store:
  commit-graph: add repo arg to graph readers
  commit-graph: store graph in struct object_store
  commit-graph: add free_commit_graph
  commit-graph: add missing forward declaration
  object-store: add missing include
  commit-graph: refactor preparing commit graph
2018-08-02 15:30:47 -07:00
Junio C Hamano
c18ac30e9e Merge branch 'en/dirty-merge-fixes'
The recursive merge strategy did not properly ensure there was no
change between HEAD and the index before performing its operation,
which has been corrected.

* en/dirty-merge-fixes:
  merge: fix misleading pre-merge check documentation
  merge-recursive: enforce rule that index matches head before merging
  t6044: add more testcases with staged changes before a merge is invoked
  merge-recursive: fix assumption that head tree being merged is HEAD
  merge-recursive: make sure when we say we abort that we actually abort
  t6044: add a testcase for index matching head, when head doesn't match HEAD
  t6044: verify that merges expected to abort actually abort
  index_has_changes(): avoid assuming operating on the_index
  read-cache.c: move index_has_changes() from merge.c
2018-08-02 15:30:45 -07:00
Junio C Hamano
ae533c4a92 Merge branch 'jm/cache-entry-from-mem-pool'
For a large tree, the index needs to hold many cache entries
allocated on heap.  These cache entries are now allocated out of a
dedicated memory pool to amortize malloc(3) overhead.

* jm/cache-entry-from-mem-pool:
  block alloc: add validations around cache_entry lifecyle
  block alloc: allocate cache entries from mem_pool
  mem-pool: fill out functionality
  mem-pool: add life cycle management functions
  mem-pool: only search head block for available space
  block alloc: add lifecycle APIs for cache_entry structs
  read-cache: teach make_cache_entry to take object_id
  read-cache: teach refresh_cache_entry to take istate
2018-08-02 15:30:43 -07:00
Junio C Hamano
37aac3e408 Merge branch 'bc/object-id'
Conversion from uchar[40] to struct object_id continues.

* bc/object-id:
  pretty: switch hard-coded constants to the_hash_algo
  sha1-file: convert constants to uses of the_hash_algo
  log-tree: switch GIT_SHA1_HEXSZ to the_hash_algo->hexsz
  diff: switch GIT_SHA1_HEXSZ to use the_hash_algo
  builtin/merge-recursive: make hash independent
  builtin/merge: switch to use the_hash_algo
  builtin/fmt-merge-msg: make hash independent
  builtin/update-index: simplify parsing of cacheinfo
  builtin/update-index: convert to using the_hash_algo
  refs/files-backend: use the_hash_algo for writing refs
  sha1-name: use the_hash_algo when parsing object names
  strbuf: allocate space with GIT_MAX_HEXSZ
  commit: express tree entry constants in terms of the_hash_algo
  hex: switch to using the_hash_algo
  tree-walk: replace hard-coded constants with the_hash_algo
  cache: update object ID functions for the_hash_algo
2018-08-02 15:30:39 -07:00
Johannes Schindelin
58930fdb19 cache.h: extract enum declaration from inside a struct declaration
While it is technically possible, it is confusing. Not only the user,
but also VS Code's intellisense.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-30 13:14:38 -07:00
Jeff King
6ebd1cafe2 check_replace_refs: rename to read_replace_refs
This was added as a NEEDSWORK in c3c36d7de2 (replace-object:
check_replace_refs is safe in multi repo environment, 2018-04-11),
waiting for a calmer period. Since doing so now doesn't conflict
with anything in 'pu', it seems as good a time as any.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-18 15:45:14 -07:00
Jeff King
72470aa38a check_replace_refs: fix outdated comment
Commit afc711b8e1 (rename read_replace_refs to
check_replace_refs, 2014-02-18) added a comment mentioning
that check_replace_refs is set in two ways:

  - from user intent via --no-replace-objects, etc

  - after seeing there are no replace refs to respect

Since c3c36d7de2 (replace-object: check_replace_refs is safe
in multi repo environment, 2018-04-11) the second is no
longer true. Let's drop that part of the comment.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-18 15:45:06 -07:00
Junio C Hamano
00624d608c Merge branch 'sb/object-store-grafts'
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.

* sb/object-store-grafts:
  commit: allow lookup_commit_graft to handle arbitrary repositories
  commit: allow prepare_commit_graft to handle arbitrary repositories
  shallow: migrate shallow information into the object parser
  path.c: migrate global git_path_* to take a repository argument
  cache: convert get_graft_file to handle arbitrary repositories
  commit: convert read_graft_file to handle arbitrary repositories
  commit: convert register_commit_graft to handle arbitrary repositories
  commit: convert commit_graft_pos() to handle arbitrary repositories
  shallow: add repository argument to is_repository_shallow
  shallow: add repository argument to check_shallow_file_for_update
  shallow: add repository argument to register_shallow
  shallow: add repository argument to set_alternate_shallow_file
  commit: add repository argument to lookup_commit_graft
  commit: add repository argument to prepare_commit_graft
  commit: add repository argument to read_graft_file
  commit: add repository argument to register_commit_graft
  commit: add repository argument to commit_graft_pos
  object: move grafts to object parser
  object-store: move object access functions to object-store.h
2018-07-18 12:20:28 -07:00
Jonathan Tan
dade47c06c commit-graph: add repo arg to graph readers
Add a struct repository argument to the functions in commit-graph.h that
read the commit graph. (This commit does not affect functions that write
commit graphs.)

Because the commit graph functions can now read the commit graph of any
repository, the global variable core_commit_graph has been removed.
Instead, the config option core.commitGraph is now read on the first
time in a repository that a commit is attempted to be parsed using its
commit graph.

This commit includes a test that exercises the functionality on an
arbitrary repository that is not the_repository.

Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-17 15:47:48 -07:00
brian m. carlson
509f6f62a4 cache: update object ID functions for the_hash_algo
Most of our code has been converted to use struct object_id for object
IDs.  However, there are some places that still have not, and there are
a variety of places that compare equivalently sized hashes that are not
object IDs.  All of these hashes are artifacts of the internal hash
algorithm in use, and when we switch to NewHash for object storage, all
of these uses will also switch.

Update the hashcpy, hashclr, and hashcmp functions to use the_hash_algo,
since they are used in a variety of places to copy and manipulate
buffers that need to move data into or out of struct object_id.  This
has the effect of making the corresponding oid* functions use
the_hash_algo as well.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-16 14:27:38 -07:00
Elijah Newren
e1f8694f33 merge-recursive: fix assumption that head tree being merged is HEAD
`git merge-recursive` does a three-way merge between user-specified trees
base, head, and remote.  Since the user is allowed to specify head, we can
not necesarily assume that head == HEAD.

Modify index_has_changes() to take an extra argument specifying the tree
to compare against.  If NULL, it will compare to HEAD.  We then use this
from merge-recursive to make sure we compare to the user-specified head.

Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-11 09:38:36 -07:00
Elijah Newren
1b9fbefbe0 index_has_changes(): avoid assuming operating on the_index
Modify index_has_changes() to take a struct istate* instead of just
operating on the_index.  This is only a partial conversion, though,
because we call do_diff_cache() which implicitly assumes work is to be
done on the_index.  Ongoing work is being done elsewhere to do the
remainder of the conversion, and thus is not duplicated here.  Instead,
a simple check is put in place until that work is complete.

Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-03 13:13:18 -07:00
Jameson Miller
8616a2d0cb block alloc: add validations around cache_entry lifecyle
Add an option (controlled by an environment variable) perform extra
validations on mem_pool allocated cache entries. When set:

  1) Invalidate cache_entry memory when discarding cache_entry.

  2) When discarding index_state struct, verify that all cache_entries
     were allocated from expected mem_pool.

  3) When discarding mem_pools, invalidate mem_pool memory.

This should provide extra checks that mem_pools and their allocated
cache_entries are being used as expected.

Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-03 10:58:27 -07:00
Jameson Miller
8e72d67529 block alloc: allocate cache entries from mem_pool
When reading large indexes from disk, a portion of the time is
dominated in malloc() calls. This can be mitigated by allocating a
large block of memory and manage it ourselves via memory pools.

This change moves the cache entry allocation to be on top of memory
pools.

Design:

The index_state struct will gain a notion of an associated memory_pool
from which cache_entries will be allocated from. When reading in the
index from disk, we have information on the number of entries and
their size, which can guide us in deciding how large our initial
memory allocation should be. When an index is discarded, the
associated memory_pool will be discarded as well - so the lifetime of
a cache_entry is tied to the lifetime of the index_state that it was
allocated for.

In the case of a Split Index, the following rules are followed. 1st,
some terminology is defined:

Terminology:
  - 'the_index': represents the logical view of the index

  - 'split_index': represents the "base" cache entries. Read from the
    split index file.

'the_index' can reference a single split_index, as well as
cache_entries from the split_index. `the_index` will be discarded
before the `split_index` is.  This means that when we are allocating
cache_entries in the presence of a split index, we need to allocate
the entries from the `split_index`'s memory pool.  This allows us to
follow the pattern that `the_index` can reference cache_entries from
the `split_index`, and that the cache_entries will not be freed while
they are still being referenced.

Managing transient cache_entry structs:
Cache entries are usually allocated for an index, but this is not always
the case. Cache entries are sometimes allocated because this is the
type that the existing checkout_entry function works with. Because of
this, the existing code needs to handle cache entries associated with an
index / memory pool, and those that only exist transiently. Several
strategies were contemplated around how to handle this:

Chosen approach:
An extra field was added to the cache_entry type to track whether the
cache_entry was allocated from a memory pool or not. This is currently
an int field, as there are no more available bits in the existing
ce_flags bit field. If / when more bits are needed, this new field can
be turned into a proper bit field.

Alternatives:

1) Do not include any information about how the cache_entry was
allocated. Calling code would be responsible for tracking whether the
cache_entry needed to be freed or not.
  Pro: No extra memory overhead to track this state
  Con: Extra complexity in callers to handle this correctly.

The extra complexity and burden to not regress this behavior in the
future was more than we wanted.

2) cache_entry would gain knowledge about which mem_pool allocated it
  Pro: Could (potentially) do extra logic to know when a mem_pool no
       longer had references to any cache_entry
  Con: cache_entry would grow heavier by a pointer, instead of int

We didn't see a tangible benefit to this approach

3) Do not add any extra information to a cache_entry, but when freeing a
   cache entry, check if the memory exists in a region managed by existing
   mem_pools.
  Pro: No extra memory overhead to track state
  Con: Extra computation is performed when freeing cache entries

We decided tracking and iterating over known memory pool regions was
less desirable than adding an extra field to track this stae.

Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-03 10:58:27 -07:00
Jameson Miller
a849735bfb block alloc: add lifecycle APIs for cache_entry structs
It has been observed that the time spent loading an index with a large
number of entries is partly dominated by malloc() calls. This change
is in preparation for using memory pools to reduce the number of
malloc() calls made to allocate cahce entries when loading an index.

Add an API to allocate and discard cache entries, abstracting the
details of managing the memory backing the cache entries. This commit
does actually change how memory is managed - this will be done in a
later commit in the series.

This change makes the distinction between cache entries that are
associated with an index and cache entries that are not associated with
an index. A main use of cache entries is with an index, and we can
optimize the memory management around this. We still have other cases
where a cache entry is not persisted with an index, and so we need to
handle the "transient" use case as well.

To keep the congnitive overhead of managing the cache entries, there
will only be a single discard function. This means there must be enough
information kept with the cache entry so that we know how to discard
them.

A summary of the main functions in the API is:

make_cache_entry: create cache entry for use in an index. Uses specified
                  parameters to populate cache_entry fields.

make_empty_cache_entry: Create an empty cache entry for use in an index.
                        Returns cache entry with empty fields.

make_transient_cache_entry: create cache entry that is not used in an
                            index. Uses specified parameters to populate
                            cache_entry fields.

make_empty_transient_cache_entry: create cache entry that is not used in
                                  an index. Returns cache entry with
                                  empty fields.

discard_cache_entry: A single function that knows how to discard a cache
                     entry regardless of how it was allocated.

Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-03 10:58:27 -07:00
Jameson Miller
825ed4d9a0 read-cache: teach make_cache_entry to take object_id
Teach make_cache_entry function to take object_id instead of a SHA-1.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-03 10:58:15 -07:00
Jameson Miller
768d796506 read-cache: teach refresh_cache_entry to take istate
Refactor refresh_cache_entry() to work on a specific index, instead of
implicitly using the_index. This is in preparation for making the
make_cache_entry function apply to a specific index.

Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-03 10:58:15 -07:00
Junio C Hamano
b16b60f71b Merge branch 'sb/object-store-grafts' into sb/object-store-lookup
* sb/object-store-grafts:
  commit: allow lookup_commit_graft to handle arbitrary repositories
  commit: allow prepare_commit_graft to handle arbitrary repositories
  shallow: migrate shallow information into the object parser
  path.c: migrate global git_path_* to take a repository argument
  cache: convert get_graft_file to handle arbitrary repositories
  commit: convert read_graft_file to handle arbitrary repositories
  commit: convert register_commit_graft to handle arbitrary repositories
  commit: convert commit_graft_pos() to handle arbitrary repositories
  shallow: add repository argument to is_repository_shallow
  shallow: add repository argument to check_shallow_file_for_update
  shallow: add repository argument to register_shallow
  shallow: add repository argument to set_alternate_shallow_file
  commit: add repository argument to lookup_commit_graft
  commit: add repository argument to prepare_commit_graft
  commit: add repository argument to read_graft_file
  commit: add repository argument to register_commit_graft
  commit: add repository argument to commit_graft_pos
  object: move grafts to object parser
  object-store: move object access functions to object-store.h
2018-06-29 10:43:28 -07:00
Junio C Hamano
110240588d Merge branch 'sb/object-store-alloc'
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.

* sb/object-store-alloc:
  alloc: allow arbitrary repositories for alloc functions
  object: allow create_object to handle arbitrary repositories
  object: allow grow_object_hash to handle arbitrary repositories
  alloc: add repository argument to alloc_commit_index
  alloc: add repository argument to alloc_report
  alloc: add repository argument to alloc_object_node
  alloc: add repository argument to alloc_tag_node
  alloc: add repository argument to alloc_commit_node
  alloc: add repository argument to alloc_tree_node
  alloc: add repository argument to alloc_blob_node
  object: add repository argument to grow_object_hash
  object: add repository argument to create_object
  repository: introduce parsed objects field
2018-06-25 13:22:38 -07:00
Junio C Hamano
2289880f78 Merge branch 'nd/command-list'
The list of commands with their various attributes were spread
across a few places in the build procedure, but it now is getting a
bit more consolidated to allow more automation.

* nd/command-list:
  completion: allow to customize the completable command list
  completion: add and use --list-cmds=alias
  completion: add and use --list-cmds=nohelpers
  Move declaration for alias.c to alias.h
  completion: reduce completable command list
  completion: let git provide the completable command list
  command-list.txt: documentation and guide line
  help: use command-list.txt for the source of guides
  help: add "-a --verbose" to list all commands with synopsis
  git: support --list-cmds=list-<category>
  completion: implement and use --list-cmds=main,others
  git --list-cmds: collect command list in a string_list
  git.c: convert --list-* to --list-cmds=*
  Remove common-cmds.h
  help: use command-list.h for common command list
  generate-cmds.sh: export all commands to command-list.h
  generate-cmds.sh: factor out synopsis extract code
2018-06-01 15:06:37 +09:00
Junio C Hamano
42c8ce1c49 Merge branch 'bc/object-id'
Conversion from uchar[20] to struct object_id continues.

* bc/object-id: (42 commits)
  merge-one-file: compute empty blob object ID
  add--interactive: compute the empty tree value
  Update shell scripts to compute empty tree object ID
  sha1_file: only expose empty object constants through git_hash_algo
  dir: use the_hash_algo for empty blob object ID
  sequencer: use the_hash_algo for empty tree object ID
  cache-tree: use is_empty_tree_oid
  sha1_file: convert cached object code to struct object_id
  builtin/reset: convert use of EMPTY_TREE_SHA1_BIN
  builtin/receive-pack: convert one use of EMPTY_TREE_SHA1_HEX
  wt-status: convert two uses of EMPTY_TREE_SHA1_HEX
  submodule: convert several uses of EMPTY_TREE_SHA1_HEX
  sequencer: convert one use of EMPTY_TREE_SHA1_HEX
  merge: convert empty tree constant to the_hash_algo
  builtin/merge: switch tree functions to use object_id
  builtin/am: convert uses of EMPTY_TREE_SHA1_BIN to the_hash_algo
  sha1-file: add functions for hex empty tree and blob OIDs
  builtin/receive-pack: avoid hard-coded constants for push certs
  diff: specify abbreviation size in terms of the_hash_algo
  upload-pack: replace use of several hard-coded constants
  ...
2018-05-30 14:04:10 +09:00
Junio C Hamano
7913f53b56 Sync with Git 2.17.1
* maint: (25 commits)
  Git 2.17.1
  Git 2.16.4
  Git 2.15.2
  Git 2.14.4
  Git 2.13.7
  fsck: complain when .gitmodules is a symlink
  index-pack: check .gitmodules files with --strict
  unpack-objects: call fsck_finish() after fscking objects
  fsck: call fsck_finish() after fscking objects
  fsck: check .gitmodules content
  fsck: handle promisor objects in .gitmodules check
  fsck: detect gitmodules files
  fsck: actually fsck blob data
  fsck: simplify ".git" check
  index-pack: make fsck error message more specific
  verify_path: disallow symlinks in .gitmodules
  update-index: stat updated files earlier
  verify_dotfile: mention case-insensitivity in comment
  verify_path: drop clever fallthrough
  skip_prefix: add case-insensitive variant
  ...
2018-05-29 17:10:05 +09:00
Junio C Hamano
ad635e82d6 Merge branch 'nd/pack-objects-pack-struct'
"git pack-objects" needs to allocate tons of "struct object_entry"
while doing its work, and shrinking its size helps the performance
quite a bit.

* nd/pack-objects-pack-struct:
  ci: exercise the whole test suite with uncommon code in pack-objects
  pack-objects: reorder members to shrink struct object_entry
  pack-objects: shrink delta_size field in struct object_entry
  pack-objects: shrink size field in struct object_entry
  pack-objects: clarify the use of object_entry::size
  pack-objects: don't check size when the object is bad
  pack-objects: shrink z_delta_size field in struct object_entry
  pack-objects: refer to delta objects by index instead of pointer
  pack-objects: move in_pack out of struct object_entry
  pack-objects: move in_pack_pos out of struct object_entry
  pack-objects: use bitfield for object_entry::depth
  pack-objects: use bitfield for object_entry::dfs_state
  pack-objects: turn type and in_pack_type to bitfields
  pack-objects: a bit of document about struct object_entry
  read-cache.c: make $GIT_TEST_SPLIT_INDEX boolean
2018-05-23 14:38:19 +09:00
Junio C Hamano
fcb6df3254 Merge branch 'sb/oid-object-info'
The codepath around object-info API has been taught to take the
repository object (which in turn tells the API which object store
the objects are to be located).

* sb/oid-object-info:
  cache.h: allow oid_object_info to handle arbitrary repositories
  packfile: add repository argument to cache_or_unpack_entry
  packfile: add repository argument to unpack_entry
  packfile: add repository argument to read_object
  packfile: add repository argument to packed_object_info
  packfile: add repository argument to packed_to_object_type
  packfile: add repository argument to retry_bad_packed_offset
  cache.h: add repository argument to oid_object_info
  cache.h: add repository argument to oid_object_info_extended
2018-05-23 14:38:16 +09:00
Junio C Hamano
b577198526 Merge branch 'nd/pack-format-doc'
Doc update.

* nd/pack-format-doc:
  pack-format.txt: more details on pack file format
2018-05-23 14:38:11 +09:00
Junio C Hamano
68f95b26e4 Sync with Git 2.16.4
* maint-2.16:
  Git 2.16.4
  Git 2.15.2
  Git 2.14.4
  Git 2.13.7
  verify_path: disallow symlinks in .gitmodules
  update-index: stat updated files earlier
  verify_dotfile: mention case-insensitivity in comment
  verify_path: drop clever fallthrough
  skip_prefix: add case-insensitive variant
  is_{hfs,ntfs}_dotgitmodules: add tests
  is_ntfs_dotgit: match other .git files
  is_hfs_dotgit: match other .git files
  is_ntfs_dotgit: use a size_t for traversing string
  submodule-config: verify submodule names as paths
2018-05-22 14:25:26 +09:00
Junio C Hamano
023020401d Sync with Git 2.15.2
* maint-2.15:
  Git 2.15.2
  Git 2.14.4
  Git 2.13.7
  verify_path: disallow symlinks in .gitmodules
  update-index: stat updated files earlier
  verify_dotfile: mention case-insensitivity in comment
  verify_path: drop clever fallthrough
  skip_prefix: add case-insensitive variant
  is_{hfs,ntfs}_dotgitmodules: add tests
  is_ntfs_dotgit: match other .git files
  is_hfs_dotgit: match other .git files
  is_ntfs_dotgit: use a size_t for traversing string
  submodule-config: verify submodule names as paths
2018-05-22 14:18:06 +09:00
Junio C Hamano
9e0f06d55d Sync with Git 2.14.4
* maint-2.14:
  Git 2.14.4
  Git 2.13.7
  verify_path: disallow symlinks in .gitmodules
  update-index: stat updated files earlier
  verify_dotfile: mention case-insensitivity in comment
  verify_path: drop clever fallthrough
  skip_prefix: add case-insensitive variant
  is_{hfs,ntfs}_dotgitmodules: add tests
  is_ntfs_dotgit: match other .git files
  is_hfs_dotgit: match other .git files
  is_ntfs_dotgit: use a size_t for traversing string
  submodule-config: verify submodule names as paths
2018-05-22 14:15:14 +09:00
Junio C Hamano
7b01c71b64 Sync with Git 2.13.7
* maint-2.13:
  Git 2.13.7
  verify_path: disallow symlinks in .gitmodules
  update-index: stat updated files earlier
  verify_dotfile: mention case-insensitivity in comment
  verify_path: drop clever fallthrough
  skip_prefix: add case-insensitive variant
  is_{hfs,ntfs}_dotgitmodules: add tests
  is_ntfs_dotgit: match other .git files
  is_hfs_dotgit: match other .git files
  is_ntfs_dotgit: use a size_t for traversing string
  submodule-config: verify submodule names as paths
2018-05-22 14:10:49 +09:00
Jeff King
10ecfa7649 verify_path: disallow symlinks in .gitmodules
There are a few reasons it's not a good idea to make
.gitmodules a symlink, including:

  1. It won't be portable to systems without symlinks.

  2. It may behave inconsistently, since Git may look at
     this file in the index or a tree without bothering to
     resolve any symbolic links. We don't do this _yet_, but
     the config infrastructure is there and it's planned for
     the future.

With some clever code, we could make (2) work. And some
people may not care about (1) if they only work on one
platform. But there are a few security reasons to simply
disallow it:

  a. A symlinked .gitmodules file may circumvent any fsck
     checks of the content.

  b. Git may read and write from the on-disk file without
     sanity checking the symlink target. So for example, if
     you link ".gitmodules" to "../oops" and run "git
     submodule add", we'll write to the file "oops" outside
     the repository.

Again, both of those are problems that _could_ be solved
with sufficient code, but given the complications in (1) and
(2), we're better off just outlawing it explicitly.

Note the slightly tricky call to verify_path() in
update-index's update_one(). There we may not have a mode if
we're not updating from the filesystem (e.g., we might just
be removing the file). Passing "0" as the mode there works
fine; since it's not a symlink, we'll just skip the extra
checks.

Signed-off-by: Jeff King <peff@peff.net>
2018-05-21 23:50:11 -04:00
Johannes Schindelin
e7cb0b4455 is_ntfs_dotgit: match other .git files
When we started to catch NTFS short names that clash with .git, we only
looked for GIT~1. This is sufficient because we only ever clone into an
empty directory, so .git is guaranteed to be the first subdirectory or
file in that directory.

However, even with a fresh clone, .gitmodules is *not* necessarily the
first file to be written that would want the NTFS short name GITMOD~1: a
malicious repository can add .gitmodul0000 and friends, which sorts
before `.gitmodules` and is therefore checked out *first*. For that
reason, we have to test not only for ~1 short names, but for others,
too.

It's hard to just adapt the existing checks in is_ntfs_dotgit(): since
Windows 2000 (i.e., in all Windows versions still supported by Git),
NTFS short names are only generated in the <prefix>~<number> form up to
number 4. After that, a *different* prefix is used, calculated from the
long file name using an undocumented, but stable algorithm.

For example, the short name of .gitmodules would be GITMOD~1, but if it
is taken, and all of ~2, ~3 and ~4 are taken, too, the short name
GI7EBA~1 will be used. From there, collisions are handled by
incrementing the number, shortening the prefix as needed (until ~9999999
is reached, in which case NTFS will not allow the file to be created).

We'd also want to handle .gitignore and .gitattributes, which suffer
from a similar problem, using the fall-back short names GI250A~1 and
GI7D29~1, respectively.

To accommodate for that, we could reimplement the hashing algorithm, but
it is just safer and simpler to provide the known prefixes. This
algorithm has been reverse-engineered and described at
https://usn.pw/blog/gen/2015/06/09/filenames/, which is defunct but
still available via https://web.archive.org/.

These can be recomputed by running the following Perl script:

-- snip --
use warnings;
use strict;

sub compute_short_name_hash ($) {
        my $checksum = 0;
        foreach (split('', $_[0])) {
                $checksum = ($checksum * 0x25 + ord($_)) & 0xffff;
        }

        $checksum = ($checksum * 314159269) & 0xffffffff;
        $checksum = 1 + (~$checksum & 0x7fffffff) if ($checksum & 0x80000000);
        $checksum -= (($checksum * 1152921497) >> 60) * 1000000007;

        return scalar reverse sprintf("%x", $checksum & 0xffff);
}

print compute_short_name_hash($ARGV[0]);
-- snap --

E.g., running that with the argument ".gitignore" will
result in "250a" (which then becomes "gi250a" in the code).

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff King <peff@peff.net>
2018-05-21 23:50:11 -04:00
Nguyễn Thái Ngọc Duy
65b5f9483e Move declaration for alias.c to alias.h
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-21 13:23:14 +09:00
Stefan Beller
0437a2e365 cache: convert get_graft_file to handle arbitrary repositories
This conversion was done without the #define trick used in the earlier
series refactoring to have better repository access, because this function
is easy to review, as all lines are converted and it has only one caller.

Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-18 08:13:10 +09:00
Stefan Beller
cbd53a2193 object-store: move object access functions to object-store.h
This should make these functions easier to find and cache.h less
overwhelming to read.

In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file

As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise.  It would be better to #include wherever
identifiers from the header are used.  That can happen later
when we have better tooling for it.

Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-16 11:42:03 +09:00
Stefan Beller
14ba97f81c alloc: allow arbitrary repositories for alloc functions
We have to convert all of the alloc functions at once, because alloc_report
uses a funky macro for reporting. It is better for the sake of mechanical
conversion to convert multiple functions at once rather than changing the
structure of the reporting function.

We record all memory allocation in alloc.c, and free them in
clear_alloc_state, which is called for all repositories except
the_repository.

Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-16 11:16:50 +09:00
Nguyễn Thái Ngọc Duy
011b648646 pack-format.txt: more details on pack file format
The current document mentions OBJ_* constants without their actual
values. A git developer would know these are from cache.h but that's
not very friendly to a person who wants to read this file to implement
a pack file parser.

Similarly, the deltified representation is not documented at all (the
"document" is basically patch-delta.c). Translate that C code to
English with a bit more about what ofs-delta and ref-delta mean.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-13 10:20:03 +09:00
Stefan Beller
dd5d9deb01 alloc: add repository argument to alloc_commit_index
This is a small mechanical change; it doesn't change the
implementation to handle repositories other than the_repository yet.
Use a macro to catch callers passing a repository other than
the_repository at compile time.

Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-09 12:12:36 +09:00
Stefan Beller
17bfe87369 alloc: add repository argument to alloc_report
This is a small mechanical change; it doesn't change the
implementation to handle repositories other than the_repository yet.
Use a macro to catch callers passing a repository other than
the_repository at compile time.

Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-09 12:12:36 +09:00
Stefan Beller
13e3fdcb76 alloc: add repository argument to alloc_object_node
This is a small mechanical change; it doesn't change the
implementation to handle repositories other than the_repository yet.
Use a macro to catch callers passing a repository other than
the_repository at compile time.

Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-09 12:12:36 +09:00
Stefan Beller
a0bd9086bb alloc: add repository argument to alloc_tag_node
This is a small mechanical change; it doesn't change the
implementation to handle repositories other than the_repository yet.
Use a macro to catch callers passing a repository other than
the_repository at compile time.

Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-09 12:12:36 +09:00
Stefan Beller
8ba0e5ec57 alloc: add repository argument to alloc_commit_node
This is a small mechanical change; it doesn't change the
implementation to handle repositories other than the_repository yet.
Use a macro to catch callers passing a repository other than
the_repository at compile time.

Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-09 12:12:36 +09:00
Stefan Beller
cf7203bdc6 alloc: add repository argument to alloc_tree_node
This is a small mechanical change; it doesn't change the
implementation to handle repositories other than the_repository yet.
Use a macro to catch callers passing a repository other than
the_repository at compile time.

Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-09 12:12:36 +09:00
Stefan Beller
f0de1d62ae alloc: add repository argument to alloc_blob_node
This is a small mechanical change; it doesn't change the
implementation to handle repositories other than the_repository yet.
Use a macro to catch callers passing a repository other than
the_repository at compile time.

Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-09 12:12:36 +09:00
Junio C Hamano
174774cd51 Merge branch 'sb/object-store-replace'
The effort to pass the repository in-core structure throughout the
API continues.  This round deals with the code that implements the
refs/replace/ mechanism.

* sb/object-store-replace:
  replace-object: allow lookup_replace_object to handle arbitrary repositories
  replace-object: allow do_lookup_replace_object to handle arbitrary repositories
  replace-object: allow prepare_replace_object to handle arbitrary repositories
  refs: allow for_each_replace_ref to handle arbitrary repositories
  refs: store the main ref store inside the repository struct
  replace-object: add repository argument to lookup_replace_object
  replace-object: add repository argument to do_lookup_replace_object
  replace-object: add repository argument to prepare_replace_object
  refs: add repository argument to for_each_replace_ref
  refs: add repository argument to get_main_ref_store
  replace-object: check_replace_refs is safe in multi repo environment
  replace-object: eliminate replace objects prepared flag
  object-store: move lookup_replace_object to replace-object.h
  replace-object: move replace_map to object store
  replace_object: use oidmap
2018-05-08 15:59:21 +09:00
Junio C Hamano
b10edb2df5 Merge branch 'ds/commit-graph'
Precompute and store information necessary for ancestry traversal
in a separate file to optimize graph walking.

* ds/commit-graph:
  commit-graph: implement "--append" option
  commit-graph: build graph from starting commits
  commit-graph: read only from specific pack-indexes
  commit: integrate commit graph with commit parsing
  commit-graph: close under reachability
  commit-graph: add core.commitGraph setting
  commit-graph: implement git commit-graph read
  commit-graph: implement git-commit-graph write
  commit-graph: implement write_commit_graph()
  commit-graph: create git-commit-graph builtin
  graph: add commit graph design document
  commit-graph: add format document
  csum-file: refactor finalize_hashfile() method
  csum-file: rename hashclose() to finalize_hashfile()
2018-05-08 15:59:20 +09:00
Junio C Hamano
92034a9cd5 Merge branch 'dj/runtime-prefix'
A build-time option has been added to allow Git to be told to refer
to its associated files relative to the main binary, in the same
way that has been possible on Windows for quite some time, for
Linux, BSDs and Darwin.

* dj/runtime-prefix:
  Makefile: quote $INSTLIBDIR when passing it to sed
  Makefile: remove unused @@PERLLIBDIR@@ substitution variable
  mingw/msvc: use the new-style RUNTIME_PREFIX helper
  exec_cmd: provide a new-style RUNTIME_PREFIX helper for Windows
  exec_cmd: RUNTIME_PREFIX on some POSIX systems
  Makefile: add Perl runtime prefix support
  Makefile: generate Perl header from template file
2018-05-08 15:59:17 +09:00
brian m. carlson
e1ccd7e2b1 sha1_file: only expose empty object constants through git_hash_algo
There really isn't any case in which we want to expose the constants for
empty trees and blobs outside of using the hash algorithm abstraction.
Make these constants static and stop exposing the defines in cache.h.
Remove the constants which are no longer in use.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-02 13:59:53 +09:00
brian m. carlson
d8a92ced62 sha1-file: add functions for hex empty tree and blob OIDs
Oftentimes, we'll want to refer to an empty tree or empty blob by its
hex name without having to call oid_to_hex or explicitly refer to
the_hash_algo.  Add helper functions that format these values into
static buffers and return them for easy use.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-02 13:59:51 +09:00
brian m. carlson
75691ea345 Update struct index_state to use struct object_id
Adjust struct index_state to use struct object_id instead of unsigned
char [20].

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-02 13:59:50 +09:00
brian m. carlson
6862ebbfcb sha1-file: convert freshen functions to object_id
Convert the various functions for freshening objects and
has_loose_object_nonlocal to use struct object_id.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-02 13:59:49 +09:00
brian m. carlson
c51c39418b packfile: remove unused member from struct pack_entry
The sha1 member in struct pack_entry is unused except for one instance
in which we store a value in it.  Since nobody ever reads this value,
don't bother to compute it and remove the member from struct pack_entry.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-02 13:59:49 +09:00
brian m. carlson
6f13fd0ec6 Remove unused member in struct object_context
The tree member of struct object_context is unused except in one place
where we write to it.  Since there are no users of this member, remove
it.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-02 13:59:49 +09:00
brian m. carlson
69d124255e cache: add a function to read an object ID from a buffer
In various places throughout the codebase, we need to read data into a
struct object_id from a pack or other unsigned char buffer.  Add an
inline function that does this based on the current hash algorithm in
use, and use it in several places.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-02 13:59:48 +09:00
Stefan Beller
9d98354f48 cache.h: allow oid_object_info to handle arbitrary repositories
This involves also adapting oid_object_info_extended and a some
internal functions that are used to implement these. It all has to
happen in one patch, because of a single recursive chain of calls visits
all these functions.

oid_object_info_extended is also used in partial clones, which allow
fetching missing objects. As this series will not add the repository
struct to the transport code and fetch_object(), add a TODO note and
omit fetching if a user tries to use a partial clone in a repository
other than the_repository.

Among the functions modified to handle arbitrary repositories,
unpack_entry() is one of them. Note that it still references the globals
"delta_base_cache" and "delta_base_cached", but those are safe to be
referenced (the former is indexed partly by "struct packed_git *", which
is repo-specific, and the latter is only used to limit the size of the
former as an optimization).

Helped-by: Brandon Williams <bmwill@google.com>
Helped-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-26 10:54:28 +09:00
Stefan Beller
0df8e96566 cache.h: add repository argument to oid_object_info
Add a repository argument to allow the callers of oid_object_info
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.

As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.

Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-26 10:54:27 +09:00
Stefan Beller
7ecd869060 cache.h: add repository argument to oid_object_info_extended
Add a repository argument to allow oid_object_info_extended callers
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.

Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-26 10:54:27 +09:00
Junio C Hamano
ff6eb825f0 Merge branch 'jk/relative-directory-fix'
Some codepaths, including the refs API, get and keep relative
paths, that go out of sync when the process does chdir(2).  The
chdir-notify API is introduced to let these codepaths adjust these
cached paths to the new current directory.

* jk/relative-directory-fix:
  refs: use chdir_notify to update cached relative paths
  set_work_tree: use chdir_notify
  add chdir-notify API
  trace.c: export trace_setup_key
  set_git_dir: die when setenv() fails
2018-04-25 13:28:52 +09:00
Nguyễn Thái Ngọc Duy
fd9b1baef8 pack-objects: turn type and in_pack_type to bitfields
An extra field type_valid is added to carry the equivalent of OBJ_BAD
in the original "type" field. in_pack_type always contains a valid
type so we only need 3 bits for it.

A note about accepting OBJ_NONE as "valid" type. The function
read_object_list_from_stdin() can pass this value [1] and it
eventually calls create_object_entry() where current code skip setting
"type" field if the incoming type is zero. This does not have any bad
side effects because "type" field should be memset()'d anyway.

But since we also need to set type_valid now, skipping oe_set_type()
leaves type_valid zero/false, which will make oe_type() return
OBJ_BAD, not OBJ_NONE anymore. Apparently we do care about OBJ_NONE in
prepare_pack(). This switch from OBJ_NONE to OBJ_BAD may trigger

    fatal: unable to get type of object ...

Accepting OBJ_NONE [2] does sound wrong, but this is how it is has
been for a very long time and I haven't time to dig in further.

[1] See 5c49c11686 (pack-objects: better check_object() performances -
    2007-04-16)

[2] 21666f1aae (convert object type handling from a string to a number
    - 2007-02-26)

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-16 12:38:58 +09:00
Stefan Beller
47f351e9b3 object-store: move lookup_replace_object to replace-object.h
lookup_replace_object is a low-level function that most users of the
object store do not need to use directly.

Move it to replace-object.h to avoid a dependency loop in an upcoming
change to its inline definition that will make use of repository.h.

Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-12 11:38:56 +09:00
Dan Jacques
226c0ddd0d exec_cmd: RUNTIME_PREFIX on some POSIX systems
Enable Git to resolve its own binary location using a variety of
OS-specific and generic methods, including:

- procfs via "/proc/self/exe" (Linux)
- _NSGetExecutablePath (Darwin)
- KERN_PROC_PATHNAME sysctl on BSDs.
- argv0, if absolute (all, including Windows).

This is used to enable RUNTIME_PREFIX support for non-Windows systems,
notably Linux and Darwin. When configured with RUNTIME_PREFIX, Git will
do a best-effort resolution of its executable path and automatically use
this as its "exec_path" for relative helper and data lookups, unless
explicitly overridden.

Small incidental formatting cleanup of "exec_cmd.c".

Signed-off-by: Dan Jacques <dnj@google.com>
Thanks-to: Robbie Iannucci <iannucci@google.com>
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-11 18:10:28 +09:00
Junio C Hamano
cf0b1793ea Merge branch 'sb/object-store'
Refactoring the internal global data structure to make it possible
to open multiple repositories, work with and then close them.

Rerolled by Duy on top of a separate preliminary clean-up topic.
The resulting structure of the topics looked very sensible.

* sb/object-store: (27 commits)
  sha1_file: allow sha1_loose_object_info to handle arbitrary repositories
  sha1_file: allow map_sha1_file to handle arbitrary repositories
  sha1_file: allow map_sha1_file_1 to handle arbitrary repositories
  sha1_file: allow open_sha1_file to handle arbitrary repositories
  sha1_file: allow stat_sha1_file to handle arbitrary repositories
  sha1_file: allow sha1_file_name to handle arbitrary repositories
  sha1_file: add repository argument to sha1_loose_object_info
  sha1_file: add repository argument to map_sha1_file
  sha1_file: add repository argument to map_sha1_file_1
  sha1_file: add repository argument to open_sha1_file
  sha1_file: add repository argument to stat_sha1_file
  sha1_file: add repository argument to sha1_file_name
  sha1_file: allow prepare_alt_odb to handle arbitrary repositories
  sha1_file: allow link_alt_odb_entries to handle arbitrary repositories
  sha1_file: add repository argument to prepare_alt_odb
  sha1_file: add repository argument to link_alt_odb_entries
  sha1_file: add repository argument to read_info_alternates
  sha1_file: add repository argument to link_alt_odb_entry
  sha1_file: add raw_object_store argument to alt_odb_usable
  pack: move approximate object count to object store
  ...
2018-04-11 13:09:55 +09:00
Derrick Stolee
1b70dfd594 commit-graph: add core.commitGraph setting
The commit graph feature is controlled by the new core.commitGraph config
setting. This defaults to 0, so the feature is opt-in.

The intention of core.commitGraph is that a user can always stop checking
for or parsing commit graph files if core.commitGraph=0.

Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-11 10:43:01 +09:00
Junio C Hamano
0873c393c7 Merge branch 'nd/remove-ignore-env-field'
Code clean-up for the "repository" abstraction.

* nd/remove-ignore-env-field:
  repository.h: add comment and clarify repo_set_gitdir
  repository: delete ignore_env member
  sha1_file.c: move delayed getenv(altdb) back to setup_git_env()
  repository.c: delete dead functions
  repository.c: move env-related setup code back to environment.c
  repository: initialize the_repository in main()
2018-04-10 16:28:20 +09:00
Junio C Hamano
a5bbc29994 Merge branch 'bc/object-id'
Conversion from uchar[20] to struct object_id continues.

* bc/object-id: (36 commits)
  convert: convert to struct object_id
  sha1_file: introduce a constant for max header length
  Convert lookup_replace_object to struct object_id
  sha1_file: convert read_sha1_file to struct object_id
  sha1_file: convert read_object_with_reference to object_id
  tree-walk: convert tree entry functions to object_id
  streaming: convert istream internals to struct object_id
  tree-walk: convert get_tree_entry_follow_symlinks internals to object_id
  builtin/notes: convert static functions to object_id
  builtin/fmt-merge-msg: convert remaining code to object_id
  sha1_file: convert sha1_object_info* to object_id
  Convert remaining callers of sha1_object_info_extended to object_id
  packfile: convert unpack_entry to struct object_id
  sha1_file: convert retry_bad_packed_offset to struct object_id
  sha1_file: convert assert_sha1_type to object_id
  builtin/mktree: convert to struct object_id
  streaming: convert open_istream to use struct object_id
  sha1_file: convert check_sha1_signature to struct object_id
  sha1_file: convert read_loose_object to use struct object_id
  builtin/index-pack: convert struct ref_delta_entry to object_id
  ...
2018-04-10 08:25:45 +09:00
Junio C Hamano
5d806b74d5 Merge branch 'ti/fetch-everything-local-optim'
A "git fetch" from a repository with insane number of refs into a
repository that is already up-to-date still wasted too many cycles
making many lstat(2) calls to see if these objects at the tips
exist as loose objects locally.  These lstat(2) calls are optimized
away by enumerating all loose objects beforehand.

It is unknown if the new strategy negatively affects existing use
cases, fetching into a repository with many loose objects from a
repository with small number of refs.

* ti/fetch-everything-local-optim:
  fetch-pack.c: use oidset to check existence of loose object
2018-04-10 08:25:43 +09:00
Jeff King
48988c4d0c set_git_dir: die when setenv() fails
The set_git_dir() function returns an error if setenv()
fails, but there are zero callers who pay attention to this
return value. If this ever were to happen, it could cause
confusing results, as sub-processes would see a potentially
stale GIT_DIR (e.g., if it is relative and we chdir()-ed to
the root of the working tree).

We _could_ try to fix each caller, but there's really
nothing useful to do after this failure except die. Let's
just lump setenv() failure into the same category as malloc
failure: things that should never happen and cause us to
abort catastrophically.

Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-30 12:49:57 -07:00
Stefan Beller
e35454fa62 sha1_file: add repository argument to map_sha1_file
Add a repository argument to allow map_sha1_file callers to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.

As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.

While at it, move the declaration to object-store.h, where it should
be easier to find.

Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-26 10:05:55 -07:00
Stefan Beller
cf78ae4f3d sha1_file: add repository argument to sha1_file_name
Add a repository argument to allow sha1_file_name callers to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.

As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.

While at it, move the declaration to object-store.h, where it should
be easier to find.

Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-26 10:05:55 -07:00
Stefan Beller
a80d72db2a object-store: move packed_git and packed_git_mru to object store
In a process with multiple repositories open, packfile accessors
should be associated to a single repository and not shared globally.
Move packed_git and packed_git_mru into the_repository and adjust
callers to reflect this.

[nd: while at there, wrap access to these two fields in get_packed_git()
and get_packed_git_mru(). This allows us to lazily initialize these
fields without caller doing that explicitly]

Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-26 10:05:46 -07:00
Stefan Beller
0d4a132144 object-store: migrate alternates struct and functions from cache.h
Migrate the struct alternate_object_database and all its related
functions to the object store as these functions are easier found in
that header. The migration is just a verbatim copy, no need to
include the object store header at any C file, because cache.h includes
repository.h which in turn includes the object-store.h

Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-23 11:06:01 -07:00
Junio C Hamano
b0e0fc267b Merge branch 'tg/split-index-fixes' into maint
The split-index mode had a few corner case bugs fixed.

* tg/split-index-fixes:
  travis: run tests with GIT_TEST_SPLIT_INDEX
  split-index: don't write cache tree with null oid entries
  read-cache: fix reading the shared index for other repos
2018-03-22 14:24:10 -07:00
Junio C Hamano
beb2cdf504 Merge branch 'ma/skip-writing-unchanged-index'
Internal API clean-up to allow write_locked_index() optionally skip
writing the in-core index when it is not modified.

* ma/skip-writing-unchanged-index:
  write_locked_index(): add flag to avoid writing unchanged index
2018-03-21 11:30:10 -07:00
Takuto Ikuta
024aa4696c fetch-pack.c: use oidset to check existence of loose object
When fetching from a repository with large number of refs, because to
check existence of each refs in local repository to packed and loose
objects, 'git fetch' ends up doing a lot of lstat(2) to non-existing
loose form, which makes it slow.

Instead of making as many lstat(2) calls as the refs the remote side
advertised to see if these objects exist in the loose form, first
enumerate all the existing loose objects in hashmap beforehand and use
it to check existence of them if the number of refs is larger than the
number of loose objects.

With this patch, the number of lstat(2) calls in `git fetch` is reduced
from 411412 to 13794 for chromium repository, it has more than 480000
remote refs.

I took time stat of `git fetch` when fetch-pack happens for chromium
repository 3 times on linux with SSD.
* with this patch
8.105s
8.309s
7.640s
avg: 8.018s

* master
12.287s
11.175s
12.227s
avg: 11.896s

On my MacBook Air which has slower lstat(2).
* with this patch
14.501s

* master
1m16.027s

`git fetch` on slow disk will be improved largely.

Signed-off-by: Takuto Ikuta <tikuta@chromium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-14 11:17:26 -07:00
brian m. carlson
b383a13cc0 Convert lookup_replace_object to struct object_id
Convert both the argument and the return value to be pointers to struct
object_id.  Update the callers and their internals to deal with the new
type.  Remove several temporaries which are no longer needed.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-14 09:23:50 -07:00
brian m. carlson
b4f5aca40e sha1_file: convert read_sha1_file to struct object_id
Convert read_sha1_file to take a pointer to struct object_id and rename
it read_object_file.  Do the same for read_sha1_file_extended.

Convert one use in grep.c to use the new function without any other code
change, since the pointer being passed is a void pointer that is already
initialized with a pointer to struct object_id.  Update the declaration
and definitions of the modified functions, and apply the following
semantic patch to convert the remaining callers:

@@
expression E1, E2, E3;
@@
- read_sha1_file(E1.hash, E2, E3)
+ read_object_file(&E1, E2, E3)

@@
expression E1, E2, E3;
@@
- read_sha1_file(E1->hash, E2, E3)
+ read_object_file(E1, E2, E3)

@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1.hash, E2, E3, E4)
+ read_object_file_extended(&E1, E2, E3, E4)

@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1->hash, E2, E3, E4)
+ read_object_file_extended(E1, E2, E3, E4)

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-14 09:23:50 -07:00
brian m. carlson
02f0547eaa sha1_file: convert read_object_with_reference to object_id
Convert read_object_with_reference to take pointers to struct object_id.
Update the internals of the function accordingly.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-14 09:23:50 -07:00
brian m. carlson
abef9020e3 sha1_file: convert sha1_object_info* to object_id
Convert sha1_object_info and sha1_object_info_extended to take pointers
to struct object_id and rename them to use "oid" instead of "sha1" in
their names.  Update the declaration and definition and apply the
following semantic patch, plus the standard object_id transforms:

@@
expression E1, E2;
@@
- sha1_object_info(E1.hash, E2)
+ oid_object_info(&E1, E2)

@@
expression E1, E2;
@@
- sha1_object_info(E1->hash, E2)
+ oid_object_info(E1, E2)

@@
expression E1, E2, E3;
@@
- sha1_object_info_extended(E1.hash, E2, E3)
+ oid_object_info_extended(&E1, E2, E3)

@@
expression E1, E2, E3;
@@
- sha1_object_info_extended(E1->hash, E2, E3)
+ oid_object_info_extended(E1, E2, E3)

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-14 09:23:49 -07:00
brian m. carlson
e816caa07b sha1_file: convert assert_sha1_type to object_id
Convert this function to take a pointer to struct object_id and rename
it to assert_oid_type.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-14 09:23:49 -07:00
brian m. carlson
17e65451e3 sha1_file: convert check_sha1_signature to struct object_id
Convert this function to take a pointer to struct object_id and rename
it check_object_signature.  Introduce temporaries to convert the return
values of lookup_replace_object and lookup_replace_object_extended into
struct object_id.

The temporaries are needed because in order to convert
lookup_replace_object, open_istream needs to be converted, and
open_istream needs check_sha1_signature to be converted, causing a loop
of dependencies.  The temporaries will be removed in a future patch.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-14 09:23:49 -07:00
brian m. carlson
d61d87bd15 sha1_file: convert read_loose_object to use struct object_id
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-14 09:23:48 -07:00
brian m. carlson
aab9583f7b Convert find_unique_abbrev* to struct object_id
Convert find_unique_abbrev and find_unique_abbrev_r to each take a
pointer to struct object_id.

Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-14 09:23:48 -07:00
Junio C Hamano
169c9c0169 Merge branch 'bw/c-plus-plus'
Avoid using identifiers that clash with C++ keywords.  Even though
it is not a goal to compile Git with C++ compilers, changes like
this help use of code analysis tools that targets C++ on our
codebase.

* bw/c-plus-plus: (37 commits)
  replace: rename 'new' variables
  trailer: rename 'template' variables
  tempfile: rename 'template' variables
  wrapper: rename 'template' variables
  environment: rename 'namespace' variables
  diff: rename 'template' variables
  environment: rename 'template' variables
  init-db: rename 'template' variables
  unpack-trees: rename 'new' variables
  trailer: rename 'new' variables
  submodule: rename 'new' variables
  split-index: rename 'new' variables
  remote: rename 'new' variables
  ref-filter: rename 'new' variables
  read-cache: rename 'new' variables
  line-log: rename 'new' variables
  imap-send: rename 'new' variables
  http: rename 'new' variables
  entry: rename 'new' variables
  diffcore-delta: rename 'new' variables
  ...
2018-03-06 14:54:07 -08:00
Nguyễn Thái Ngọc Duy
357a03ebe9 repository.c: move env-related setup code back to environment.c
It does not make sense that generic repository code contains handling
of environment variables, which are specific for the main repository
only. Refactor repo_set_gitdir() function to take $GIT_DIR and
optionally _all_ other customizable paths. These optional paths can be
NULL and will be calculated according to the default directory layout.

Note that some dead functions are left behind to reduce diff
noise. They will be deleted in the next patch.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-05 11:14:03 -08:00
Martin Ågren
610008146e write_locked_index(): add flag to avoid writing unchanged index
We have several callers like

	if (active_cache_changed && write_locked_index(...))
		handle_error();
	rollback_lock_file(...);

where the final rollback is needed because "!active_cache_changed"
shortcuts the if-expression. There are also a few variants of this,
including some if-else constructs that make it more clear when the
explicit rollback is really needed.

Teach `write_locked_index()` to take a new flag SKIP_IF_UNCHANGED and
simplify the callers. Leave the most complicated of the callers (in
builtin/update-index.c) unchanged. Rewriting it to use this new flag
would end up duplicating logic.

We could have made the new flag behave the other way round
("FORCE_WRITE"), but that could break existing users behind their backs.
Let's take the more conservative approach. We can still migrate existing
callers to use our new flag. Later we might even be able to flip the
default, possibly without entirely ignoring the risk to in-flight or
out-of-tree topics.

Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-01 13:28:01 -08:00
Brandon Williams
a63b5fca9b environment: rename 'template' variables
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.

Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-02-22 10:08:05 -08:00