Use of the `the_repository` variable is deprecated nowadays, and we
slowly but steadily convert the codebase to not use it anymore. Instead,
callers should be passing down the repository to work on via parameters.
It is hard though to prove that a given code unit does not use this
variable anymore. The most trivial case, merely demonstrating that there
is no direct use of `the_repository`, is already a bit of a pain during
code reviews as the reviewer needs to manually verify claims made by the
patch author. The bigger problem though is that we have many interfaces
that implicitly rely on `the_repository`.
Introduce a new `USE_THE_REPOSITORY_VARIABLE` macro that allows code
units to opt into usage of `the_repository`. The intent of this macro is
to demonstrate that a certain code unit does not use this variable
anymore, and to keep it from new dependencies on it in future changes,
be it explicit or implicit
For now, the macro only guards `the_repository` itself as well as
`the_hash_algo`. There are many more known interfaces where we have an
implicit dependency on `the_repository`, but those are not guarded at
the current point in time. Over time though, we should start to add
guards as required (or even better, just remove them).
Define the macro as required in our code units. As expected, most of our
code still relies on the global variable. Nearly all of our builtins
rely on the variable as there is no way yet to pass `the_repository` to
their entry point. For now, declare the macro in "biultin.h" to keep the
required changes at least a little bit more contained.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `oidcmp()` and `oideq()` functions only compare the prefix length as
specified by the given hash algorithm. This mandates that the object IDs
have a valid hash algorithm set, or otherwise we wouldn't be able to
figure out that prefix. As we do not have a hash algorithm in many
cases, for example when handling null object IDs, this assumption cannot
always be fulfilled. We thus have a fallback in place that instead uses
`the_repository` to derive the hash function. This implicit dependency
is hidden away from callers and can be quite surprising, especially in
contexts where there may be no repository.
In theory, we can adapt those functions to always memcmp(3P) the whole
length of their hash arrays. But there exist a couple of sites where we
populate `struct object_id`s such that only the prefix of its hash that
is actually used by the hash algorithm is populated. The remaining bytes
are left uninitialized. The fact that those bytes are uninitialized also
leads to warnings under Valgrind in some places where we copy those
bytes.
Refactor callsites where we populate object IDs to always initialize all
bytes. This also allows us to get rid of `oidcpy_with_padding()`, for
one because the input is now fully initialized, and because `oidcpy()`
will now always copy the whole hash array.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both `oidread()` and `oidclr()` use `the_repository` to derive the hash
function that shall be used. Require callers to pass in the hash
algorithm to get rid of this implicit dependency.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Work to support a repository that work with both SHA-1 and SHA-256
hash algorithms has started.
* eb/hash-transition: (30 commits)
t1016-compatObjectFormat: add tests to verify the conversion between objects
t1006: test oid compatibility with cat-file
t1006: rename sha1 to oid
test-lib: compute the compatibility hash so tests may use it
builtin/ls-tree: let the oid determine the output algorithm
object-file: handle compat objects in check_object_signature
tree-walk: init_tree_desc take an oid to get the hash algorithm
builtin/cat-file: let the oid determine the output algorithm
rev-parse: add an --output-object-format parameter
repository: implement extensions.compatObjectFormat
object-file: update object_info_extended to reencode objects
object-file-convert: convert commits that embed signed tags
object-file-convert: convert commit objects when writing
object-file-convert: don't leak when converting tag objects
object-file-convert: convert tag objects when writing
object-file-convert: add a function to convert trees between algorithms
object: factor out parse_mode out of fast-import and tree-walk into in object.h
cache: add a function to read an OID of a specific algorithm
tag: sign both hashes
commit: export add_header_signature to support handling signatures on tags
...
Some functions in Git's source code follow the convention that returning
a negative value indicates a fatal error, e.g. repository corruption.
Let's use this convention in `repo_in_merge_bases()` to report when one
of the specified commits is missing (i.e. when `repo_parse_commit()`
reports an error).
Also adjust the callers of `repo_in_merge_bases()` to handle such
negative return values.
Note: As of this patch, errors are returned only if any of the specified
merge heads is missing. Over the course of the next patches, missing
commits will also be reported by the `paint_down_to_common()` function,
which is called by `repo_in_merge_bases_many()`, and those errors will
be properly propagated back to the caller at that stage.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Comment updates to help developers not to attempt to modify
messages from plumbing commands that must stay constant.
It might make sense to reassess the plumbing needs every few years,
but that should be done as a separate effort.
* es/some-up-to-date-messages-must-stay:
messages: mark some strings with "up-to-date" not to touch
The treewide clean-up of "up-to-date" strings done in 7560f547
(treewide: correct several "up-to-date" to "up to date", 2017-08-23)
deliberately left some out, but unlike the lines that were changed
by the commit, the lines that were deliberately left untouched by
the commit is impossible to ask "git blame" to link back to the
commit that did not touch them.
Let's do the second best thing, leave a short comment near them
explaining why those strings should not be modified or localized.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[es: make in-code comment more developer-friendly]
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unnecessary include in the header transitively pulled in some
other headers actually needed by source files, though. Have those
source files explicitly include the headers they need.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make it possible for git ls-tree to display the tree encoded
in the hash algorithm of the oid specified to git ls-tree, update
init_tree_desc to take as a parameter the oid of the tree object.
Update all callers of init_tree_desc and init_tree_desc_gently
to pass the oid of the tree object.
Use the oid of the tree object to discover the hash algorithm
of the oid and store that hash algorithm in struct tree_desc.
Use the hash algorithm in decode_tree_entry and
update_tree_entry_internal to handle reading a tree object encoded in
a hash algorithm that differs from the repositories hash algorithm.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The xml_start_tag() function is passed the expat library's
XML_SetElementHandler() function, so it has to conform to the
expected interface. But we don't actually care about the attributes
list. Mark it so that -Wunused-parameter does not complain.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The vast majority of files including object-store.h did not need dir.h
nor khash.h. Split the header into two files, and let most just depend
upon object-store-ll.h, while letting the two callers that need it
depend on the full object-store.h.
After this patch:
$ git grep -h include..object-store | sort | uniq -c
2 #include "object-store.h"
129 #include "object-store-ll.h"
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More header clean-up.
* en/header-split-cache-h-part-2: (22 commits)
reftable: ensure git-compat-util.h is the first (indirect) include
diff.h: reduce unnecessary includes
object-store.h: reduce unnecessary includes
commit.h: reduce unnecessary includes
fsmonitor: reduce includes of cache.h
cache.h: remove unnecessary headers
treewide: remove cache.h inclusion due to previous changes
cache,tree: move basic name compare functions from read-cache to tree
cache,tree: move cmp_cache_name_compare from tree.[ch] to read-cache.c
hash-ll.h: split out of hash.h to remove dependency on repository.h
tree-diff.c: move S_DIFFTREE_IFXMIN_NEQ define from cache.h
dir.h: move DTYPE defines from cache.h
versioncmp.h: move declarations for versioncmp.c functions from cache.h
ws.h: move declarations for ws.c functions from cache.h
match-trees.h: move declarations for match-trees.c functions from cache.h
pkt-line.h: move declarations for pkt-line.c functions from cache.h
base85.h: move declarations for base85.c functions from cache.h
copy.h: move declarations for copy.c functions from cache.h
server-info.h: move declarations for server-info.c functions from cache.h
packfile.h: move pack_window and pack_entry from cache.h
...
Header clean-up.
* en/header-split-cache-h: (24 commits)
protocol.h: move definition of DEFAULT_GIT_PORT from cache.h
mailmap, quote: move declarations of global vars to correct unit
treewide: reduce includes of cache.h in other headers
treewide: remove double forward declaration of read_in_full
cache.h: remove unnecessary includes
treewide: remove cache.h inclusion due to pager.h changes
pager.h: move declarations for pager.c functions from cache.h
treewide: remove cache.h inclusion due to editor.h changes
editor: move editor-related functions and declarations into common file
treewide: remove cache.h inclusion due to object.h changes
object.h: move some inline functions and defines from cache.h
treewide: remove cache.h inclusion due to object-file.h changes
object-file.h: move declarations for object-file.c functions from cache.h
treewide: remove cache.h inclusion due to git-zlib changes
git-zlib: move declarations for git-zlib functions from cache.h
treewide: remove cache.h inclusion due to object-name.h changes
object-name.h: move declarations for object-name.c functions from cache.h
treewide: remove unnecessary cache.h inclusion
treewide: be explicit about dependence on mem-pool.h
treewide: be explicit about dependence on oid-array.h
...
Split key function and data structure definitions out of cache.h to
new header files and adjust the users.
* en/header-split-cleanup:
csum-file.h: remove unnecessary inclusion of cache.h
write-or-die.h: move declarations for write-or-die.c functions from cache.h
treewide: remove cache.h inclusion due to setup.h changes
setup.h: move declarations for setup.c functions from cache.h
treewide: remove cache.h inclusion due to environment.h changes
environment.h: move declarations for environment.c functions from cache.h
treewide: remove unnecessary includes of cache.h
wrapper.h: move declarations for wrapper.c functions from cache.h
path.h: move function declarations for path.c functions from cache.h
cache.h: remove expand_user_path()
abspath.h: move absolute path functions from cache.h
environment: move comment_line_char from cache.h
treewide: remove unnecessary cache.h inclusion from several sources
treewide: remove unnecessary inclusion of gettext.h
treewide: be explicit about dependence on gettext.h
treewide: remove unnecessary cache.h inclusion from a few headers
Code clean-up around the use of the_repository.
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
Apply the part of "the_repository.pending.cocci" pertaining to
"object-store.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"commit.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply the part of "the_repository.pending.cocci" pertaining to
"commit-reach.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a generic "fill" function that is used by both the dumb http
push and fetch code paths. It takes a void parameter in case the caller
wants to pass along extra data, but (since the previous commit) neither
does so.
So we could simply drop the extra parameter. But since it's good
practice to provide a void pointer for in callback functions, we'll
leave it here for the future, and just annotate it as unused (to appease
-Wunused-parameter).
While we're marking it, let's also fix the type in http-walker's
function to have the correct "void" type. The original had to cast the
function pointer and was technically undefined behavior (though
generally OK in practice).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.35:
Git 2.35.7
Git 2.34.7
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
Git 2.33.7
Git 2.32.6
Git 2.31.7
Git 2.30.8
apply: fix writing behind newly created symbolic links
dir-iterator: prevent top-level symlinks without FOLLOW_SYMLINKS
clone: delay picking a transport until after get_repo_path()
t5619: demonstrate clone_local() with ambiguous transport
The IOCTLFUNCTION option has been deprecated, and generates a compiler
warning in recent versions of curl. We can switch to using SEEKFUNCTION
instead. It was added in 2008 via curl 7.18.0; our INSTALL file already
indicates we require at least curl 7.19.4.
But there's one catch: curl says we should use CURL_SEEKFUNC_{OK,FAIL},
and those didn't arrive until 7.19.5. One workaround would be to use a
bare 0/1 here (or define our own macros). But let's just bump the
minimum required version to 7.19.5. That version is only a minor version
bump from our existing requirement, and is only a 2 month time bump for
versions that are almost 13 years old. So it's not likely that anybody
cares about the distinction.
Switching means we have to rewrite the ioctl functions into seek
functions. In some ways they are simpler (seeking is the only
operation), but in some ways more complex (the ioctl allowed only a full
rewind, but now we can seek to arbitrary offsets).
Curl will only ever use SEEK_SET (per their documentation), so I didn't
bother implementing anything else, since it would naturally be
completely untested. This seems unlikely to change, but I added an
assertion just in case.
Likewise, I doubt curl will ever try to seek outside of the buffer sizes
we've told it, but I erred on the defensive side here, rather than do an
out-of-bounds read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The two options do exactly the same thing, but the latter has been
deprecated and in recent versions of curl may produce a compiler
warning. Since the UPLOAD form is available everywhere (it was
introduced in the year 2000 by curl 7.1), we can just switch to it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The IOCTLFUNCTION option has been deprecated, and generates a compiler
warning in recent versions of curl. We can switch to using SEEKFUNCTION
instead. It was added in 2008 via curl 7.18.0; our INSTALL file already
indicates we require at least curl 7.19.4.
But there's one catch: curl says we should use CURL_SEEKFUNC_{OK,FAIL},
and those didn't arrive until 7.19.5. One workaround would be to use a
bare 0/1 here (or define our own macros). But let's just bump the
minimum required version to 7.19.5. That version is only a minor version
bump from our existing requirement, and is only a 2 month time bump for
versions that are almost 13 years old. So it's not likely that anybody
cares about the distinction.
Switching means we have to rewrite the ioctl functions into seek
functions. In some ways they are simpler (seeking is the only
operation), but in some ways more complex (the ioctl allowed only a full
rewind, but now we can seek to arbitrary offsets).
Curl will only ever use SEEK_SET (per their documentation), so I didn't
bother implementing anything else, since it would naturally be
completely untested. This seems unlikely to change, but I added an
assertion just in case.
Likewise, I doubt curl will ever try to seek outside of the buffer sizes
we've told it, but I erred on the defensive side here, rather than do an
out-of-bounds read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The two options do exactly the same thing, but the latter has been
deprecated and in recent versions of curl may produce a compiler
warning. Since the UPLOAD form is available everywhere (it was
introduced in the year 2000 by curl 7.1), we can just switch to it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug the memory leaks from the trickiest API of all, the revision
walker.
* ab/plug-leak-in-revisions: (27 commits)
revisions API: add a TODO for diff_free(&revs->diffopt)
revisions API: have release_revisions() release "topo_walk_info"
revisions API: have release_revisions() release "date_mode"
revisions API: call diff_free(&revs->pruning) in revisions_release()
revisions API: release "reflog_info" in release revisions()
revisions API: clear "boundary_commits" in release_revisions()
revisions API: have release_revisions() release "prune_data"
revisions API: have release_revisions() release "grep_filter"
revisions API: have release_revisions() release "filter"
revisions API: have release_revisions() release "cmdline"
revisions API: have release_revisions() release "mailmap"
revisions API: have release_revisions() release "commits"
revisions API users: use release_revisions() for "prune_data" users
revisions API users: use release_revisions() with UNLEAK()
revisions API users: use release_revisions() in builtin/log.c
revisions API users: use release_revisions() in http-push.c
revisions API users: add "goto cleanup" for release_revisions()
stash: always have the owner of "stash_info" free it
revisions API users: use release_revisions() needing REV_INFO_INIT
revision.[ch]: document and move code declared around "init"
...
Introduce and apply coccinelle rule to discourage an explicit
comparison between a pointer and NULL, and applies the clean-up to
the maintenance track.
* ep/maint-equals-null-cocci:
tree-wide: apply equals-null.cocci
tree-wide: apply equals-null.cocci
contrib/coccinnelle: add equals-null.cocci
In the case of cmd_main() in http-push.c we need to move the
deceleration of the "struct rev-list" into the loop over the
"remote_refs" when adding a release_revisions().
We'd previously set up the "revs" for each remote, but would
potentially leak memory on each one.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a convenience function to wrap the xsnprintf() command that
generates loose object headers. This code was copy/pasted in various
parts of the codebase, let's define it in one place and re-use it from
there.
All except one caller of it had a valid "enum object_type" for us,
it's only write_object_file_prepare() which might need to deal with
"git hash-object --literally" and a potential garbage type. Let's have
the primary API use an "enum object_type", and define a *_literally()
function that can take an arbitrary "const char *" for the type.
See [1] for the discussion that prompted this patch, i.e. new code in
object-file.c that wanted to copy/paste the xsnprintf() invocation.
In the case of fast-import.c the callers unfortunately need to cast
back & forth between "unsigned char *" and "char *", since
format_object_header() ad encode_in_pack_object_header() take
different signedness.
1. https://lore.kernel.org/git/211213.86bl1l9bfz.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The CURLOPT_FILE name is an alias for CURLOPT_WRITEDATA, the
CURLOPT_WRITEDATA name has been preferred since curl 7.9.7, released
in May 2002[1].
1. https://curl.se/libcurl/c/CURLOPT_WRITEDATA.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the last commit we dropped support for curl < 7.11.1, let's
continue that and drop support for versions older than 7.16.0. This
allows us to get rid of some now-obsolete #ifdefs.
Choosing 7.16.0 is a somewhat arbitrary cutoff:
1. It came out in October of 2006, almost 15 years ago.
Besides being a nice round number, around 10 years is
a common end-of-life support period, even for conservative
distributions.
2. That version introduced the curl_multi interface, which
gives us a lot of bang for the buck in removing #ifdefs
RHEL 5 came with curl 7.15.5[1] (released in August 2006). RHEL 5's
extended life cycle program ended on 2020-11-30[1]. RHEL 6 comes with
curl 7.19.7 (released in November 2009), and RHEL 7 comes with
7.29.0 (released in February 2013).
1. http://lore.kernel.org/git/873e1f31-2a96-5b72-2f20-a5816cad1b51@jupiterrise.com
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SHA-256 transition.
* bc/hash-transition-interop-part-1:
hex: print objects using the hash algorithm member
hex: default to the_hash_algo on zero algorithm value
builtin/pack-objects: avoid using struct object_id for pack hash
commit-graph: don't store file hashes as struct object_id
builtin/show-index: set the algorithm for object IDs
hash: provide per-algorithm null OIDs
hash: set, copy, and use algo field in struct object_id
builtin/pack-redundant: avoid casting buffers to struct object_id
Use the final_oid_fn to finalize hashing of object IDs
hash: add a function to finalize object IDs
http-push: set algorithm when reading object ID
Always use oidread to read into struct object_id
hash: add an algo member to struct object_id
In most places in the codebase, we use oidread to properly read an
object ID into a struct object_id. However, in the HTTP code, we end up
needing to parse a loose object path with a slash in it, so we can't do
that. Let's instead explicitly set the algorithm in this function so we
can rely on it in the future.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the other lookup_foo() functions take a repository argument, but
lookup_unknown_object() was never converted, and it uses the_repository
internally. Let's fix that.
We could leave a wrapper that uses the_repository, but there aren't that
many calls, so we'll just convert them all. I looked briefly at each
site to see if we had a repository struct (besides the_repository) we
could pass, but none of them do (so this conversion to pass
the_repository is a pure noop in each case, though it does take us one
step closer to eventually getting rid of the_repository).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code which split an argv_array call across multiple lines, like:
argv_array_pushl(&args, "one argument",
"another argument", "and more",
NULL);
was recently mechanically renamed to use strvec, which results in
mis-matched indentation like:
strvec_pushl(&args, "one argument",
"another argument", "and more",
NULL);
Let's fix these up to align the arguments with the opening paren. I did
this manually by sifting through the results of:
git jump grep 'strvec_.*,$'
and liberally applying my editor's auto-format. Most of the changes are
of the form shown above, though I also normalized a few that had
originally used a single-tab indentation (rather than our usual style of
aligning with the open paren). I also rewrapped a couple of obvious
cases (e.g., where previously too-long lines became short enough to fit
on one), but I wasn't aggressive about it. In cases broken to three or
more lines, the grouping of arguments is sometimes meaningful, and it
wasn't worth my time or reviewer time to ponder each case individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts remaining files from the first half of the alphabet,
to keep the diff to a manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add '[abcdefghjkl]*'".
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to push changes over "dumb" HTTP had a bad interaction
with the commit reachability code due to incorrect allocation of
object flag bits, which has been corrected.
* bc/http-push-flagsfix:
http-push: ensure unforced pushes fail when data would be lost
When we push using the DAV-based protocol, the client is the one that
performs the ref updates and therefore makes the checks to see whether
an unforced push should be allowed. We make this check by determining
if either (a) we lack the object file for the old value of the ref or
(b) the new value of the ref is not newer than the old value, and in
either case, reject the push.
However, the ref_newer function, which performs this latter check, has
an odd behavior due to the reuse of certain object flags. Specifically,
it will incorrectly return false in its first invocation and then
correctly return true on a subsequent invocation. This occurs because
the object flags used by http-push.c are the same as those used by
commit-reach.c, which implements ref_newer, and one piece of code
misinterprets the flags set by the other.
Note that this does not occur in all cases. For example, if the example
used in the tests is changed to use one repository instead of two and
rewind the head to add a commit, the test passes and we correctly reject
the push. However, the example provided does trigger this behavior, and
the code has been broken in this way since at least Git 2.0.0.
To solve this problem, let's move the two sets of object flags so that
they don't overlap, since we're clearly using them at the same time.
The new set should not conflict with other usage because other users are
either builtin code (which is not compiled into git http-push) or
upload-pack (which we similarly do not use here).
Reported-by: Michael Ward <mward@smartsoftwareinc.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
