We have an environment variable `jobs=16` defined in our CI system, and
this environment makes our build job failed with the following message:
error: pathspec '16' did not match any file(s) known to git
The pathspec '16' for Git command is from the environment variable
"jobs".
This is because "git-submodule" command is implemented in shell script,
and environment variables may change its behavior. Set values for
uninitialized variables, such as "jobs" and "recommend_shallow" will
fix this issue.
Helped-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Li Xuejiang <xuejiang@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-2.21: (42 commits)
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
...
* maint-2.20: (36 commits)
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
...
* maint-2.19: (34 commits)
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
...
* maint-2.18: (33 commits)
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
...
* maint-2.17: (32 commits)
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
...
* maint-2.16: (31 commits)
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
...
* maint-2.15: (29 commits)
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
...
In addition to preventing `.git` from being tracked by Git, on Windows
we also have to prevent `git~1` from being tracked, as the default NTFS
short name (also known as the "8.3 filename") for the file name `.git`
is `git~1`, otherwise it would be possible for malicious repositories to
write directly into the `.git/` directory, e.g. a `post-checkout` hook
that would then be executed _during_ a recursive clone.
When we implemented appropriate protections in 2b4c6efc82 (read-cache:
optionally disallow NTFS .git variants, 2014-12-16), we had analyzed
carefully that the `.git` directory or file would be guaranteed to be
the first directory entry to be written. Otherwise it would be possible
e.g. for a file named `..git` to be assigned the short name `git~1` and
subsequently, the short name generated for `.git` would be `git~2`. Or
`git~3`. Or even `~9999999` (for a detailed explanation of the lengths
we have to go to protect `.gitmodules`, see the commit message of
e7cb0b4455 (is_ntfs_dotgit: match other .git files, 2018-05-11)).
However, by exploiting two issues (that will be addressed in a related
patch series close by), it is currently possible to clone a submodule
into a non-empty directory:
- On Windows, file names cannot end in a space or a period (for
historical reasons: the period separating the base name from the file
extension was not actually written to disk, and the base name/file
extension was space-padded to the full 8/3 characters, respectively).
Helpfully, when creating a directory under the name, say, `sub.`, that
trailing period is trimmed automatically and the actual name on disk
is `sub`.
This means that while Git thinks that the submodule names `sub` and
`sub.` are different, they both access `.git/modules/sub/`.
- While the backslash character is a valid file name character on Linux,
it is not so on Windows. As Git tries to be cross-platform, it
therefore allows backslash characters in the file names stored in tree
objects.
Which means that it is totally possible that a submodule `c` sits next
to a file `c\..git`, and on Windows, during recursive clone a file
called `..git` will be written into `c/`, of course _before_ the
submodule is cloned.
Note that the actual exploit is not quite as simple as having a
submodule `c` next to a file `c\..git`, as we have to make sure that the
directory `.git/modules/b` already exists when the submodule is checked
out, otherwise a different code path is taken in `module_clone()` that
does _not_ allow a non-empty submodule directory to exist already.
Even if we will address both issues nearby (the next commit will
disallow backslash characters in tree entries' file names on Windows,
and another patch will disallow creating directories/files with trailing
spaces or periods), it is a wise idea to defend in depth against this
sort of attack vector: when submodules are cloned recursively, we now
_require_ the directory to be empty, addressing CVE-2019-1349.
Note: the code path we patch is shared with the code path of `git
submodule update --init`, which must not expect, in general, that the
directory is empty. Hence we have to introduce the new option
`--force-init` and hand it all the way down from `git submodule` to the
actual `git submodule--helper` process that performs the initial clone.
Reported-by: Nicolas Joly <Nicolas.Joly@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Currently, in the event that a submodule's upstream URL changes, users
have to manually alter the URL in the .gitmodules file then run
`git submodule sync`. Let's make that process easier.
Teach submodule the set-url subcommand which will automatically change
the `submodule.$name.url` property in the .gitmodules file and then run
`git submodule sync` to complete the process.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "git add" on a repository created inside the current
repository is an explicit indication that the user wants to add it
as a submodule, but when the HEAD of the inner repository is on an
unborn branch, it cannot be added as a submodule. Worse, the files
in its working tree can be added as if they are a part of the outer
repository, which is not what the user wants. These problems are
being addressed.
* km/empty-repo-is-still-a-repo:
add: error appropriately on repository with no commits
dir: do not traverse repositories with no commits
submodule: refuse to add repository with no commits
"git submodule foreach <command> --quiet" did not pass the option
down correctly, which has been corrected.
* nd/submodule-foreach-quiet:
submodule foreach: fix "<command> --quiet" not being respected
Robin reported that
git submodule foreach --quiet git pull --quiet origin
is not really quiet anymore [1]. "git pull" behaves as if --quiet is not
given.
This happens because parseopt in submodule--helper will try to parse
both --quiet options as if they are foreach's options, not git-pull's.
The parsed options are removed from the command line. So when we do
pull later, we execute just this
git pull origin
When calling submodule helper, adding "--" in front of "git pull" will
stop parseopt for parsing options that do not really belong to
submodule--helper foreach.
PARSE_OPT_KEEP_UNKNOWN is removed as a safety measure. parseopt should
never see unknown options or something has gone wrong. There are also
a couple usage string update while I'm looking at them.
While at it, I also add "--" to other subcommands that pass "$@" to
submodule--helper. "$@" in these cases are paths and less likely to be
--something-like-this. But the point still stands, git-submodule has
parsed and classified what are options, what are paths. submodule--helper
should never consider paths passed by git-submodule to be options even
if they look like one.
The test case is also contributed by Robin.
[1] it should be quiet before fc1b9243cd (submodule: port submodule
subcommand 'foreach' from shell to C, 2018-05-10) because parseopt
can't accidentally eat options then.
Reported-by: Robin H. Johnson <robbat2@gentoo.org>
Tested-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the path given to 'git submodule add' is an existing repository
that is not in the index, the repository is passed to 'git add'. If
this repository doesn't have a commit checked out, we don't get a
useful result: there is no subproject OID to track, and any untracked
files in the sub-repository are added as blobs in the top-level
repository.
To avoid getting into this state, abort if the path is a repository
that doesn't have a commit checked out. Note that this check must
come before the 'git add --dry-run' check because the next commit will
make 'git add' fail when given a repository that doesn't have a commit
checked out.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches git-submodule the set-branch subcommand which allows the
branch of a submodule to be set through a porcelain command without
having to manually manipulate the .gitmodules file.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning with --recurse-submodules a superproject with at least one
submodule with HEAD pointing to an unborn branch, the clone goes
something like this:
Cloning into 'test'...
<messages about cloning of superproject>
Submodule '<name>' (<uri>) registered for path '<submodule path>'
Cloning into '<submodule path>'...
fatal: Couldn't find remote ref HEAD
Unable to fetch in submodule path '<submodule path>'
<messages about fetching with SHA-1>
From <uri>
* branch <hash> -> FETCH_HEAD
Submodule path '<submodule path>': checked out '<hash>'
In other words, first, a fetch is done with no hash arguments (that is,
a fetch of HEAD) resulting in a "Couldn't find remote ref HEAD" error;
then, a fetch is done given a hash, which succeeds.
The fetch given a hash was added in fb43e31f2b ("submodule: try harder
to fetch needed sha1 by direct fetching sha1", 2016-02-24), and the
"Unable to fetch..." message was downgraded from a fatal error to a
notice in e30d833671 ("git-submodule.sh: try harder to fetch a
submodule", 2018-05-16).
This commit improves the notice to be clearer that we are retrying the
fetch, and that the previous messages (in particular, the fatal errors
from fetch) do not necessarily indicate that the whole command fails. In
other words:
- If the HEAD-fetch succeeds and we then have the commit we want,
git-submodule prints no explanation.
- If the HEAD-fetch succeeds and we do not have the commit we want, but
the hash-fetch succeeds, git-submodule prints no explanation.
- If the HEAD-fetch succeeds and we do not have the commit we want, but
the hash-fetch fails, git-submodule prints a fatal error.
- If the HEAD-fetch fails, fetch prints a fatal error, and
git-submodule informs the user that it will retry by fetching
specific commits by hash.
- If the hash-fetch then succeeds, git-submodule prints no
explanation (besides the ones already printed).
- If the HEAD-fetch then fails, git-submodule prints a fatal error.
It could be said that we should just eliminate the HEAD-fetch
altogether, but that changes some behavior (in particular, some refs
that were opportunistically updated would no longer be), so I have left
that alone for now.
There is an analogous situation with the fetching code in fetch_finish()
and surrounding functions. For now, I have added a NEEDSWORK.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule's default behavior wasn't documented in both git-submodule.txt
and in the usage text of git-submodule. Document the default behavior
similar to how git-remote does it.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git submodule summary" subcommand showed shortened commit
object names by mechanically truncating them at 7-hexdigit, which
has been improved to let "rev-parse --short" scale the length of
the abbreviation with the size of the repository.
* sh/submodule-summary-abbrev-fix:
git-submodule.sh: shorten submodule SHA-1s using rev-parse
Until now, `git submodule summary` was always emitting 7-character
SHA-1s that have a higher chance of being ambiguous for larger
repositories. Use `git rev-parse --short` instead, which will
determine suitable short SHA-1 lengths.
When a submodule hasn't been initialized with "submodule init" or
not cloned, `git rev-parse` would not work in it yet; as a fallback,
use the original method of cutting at 7 hexdigits.
Signed-off-by: Sven van Haastregt <svenvh@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
74d4731da1 (submodule--helper: replace connect-gitdir-workingtree by
ensure-core-worktree, 2018-08-13) forgot to exit the submodule operation
if the helper could not ensure that core.worktree is set correctly.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The submodule support has been updated to read from the blob at
HEAD:.gitmodules when the .gitmodules file is missing from the
working tree.
* ao/submodule-wo-gitmodules-checked-out:
t/helper: add test-submodule-nested-repo-config
submodule: support reading .gitmodules when it's not in the working tree
submodule: add a helper to check if it is safe to write to .gitmodules
t7506: clean up .gitmodules properly before setting up new scenario
submodule: use the 'submodule--helper config' command
submodule--helper: add a new 'config' subcommand
t7411: be nicer to future tests and really clean things up
t7411: merge tests 5 and 6
submodule: factor out a config_set_in_gitmodules_file_gently function
submodule: add a print_config_from_gitmodules() helper
When the .gitmodules file is not available in the working tree, try
using the content from the index and from the current branch. This
covers the case when the file is part of the repository but for some
reason it is not checked out, for example because of a sparse checkout.
This makes it possible to use at least the 'git submodule' commands
which *read* the gitmodules configuration file without fully populating
the working tree.
Writing to .gitmodules will still require that the file is checked out,
so check for that before calling config_set_in_gitmodules_file_gently.
Add a similar check also in git-submodule.sh::cmd_add() to anticipate
the eventual failure of the "git submodule add" command when .gitmodules
is not safely writeable; this prevents the command from leaving the
repository in a spurious state (e.g. the submodule repository was cloned
but .gitmodules was not updated because
config_set_in_gitmodules_file_gently failed).
Moreover, since config_from_gitmodules() now accesses the global object
store, it is necessary to protect all code paths which call the function
against concurrent access to the global object store. Currently this
only happens in builtin/grep.c::grep_submodules(), so call
grep_read_lock() before invoking code involving
config_from_gitmodules().
Finally, add t7418-submodule-sparse-gitmodules.sh to verify that reading
from .gitmodules succeeds and that writing to it fails when the file is
not checked out.
NOTE: there is one rare case where this new feature does not work
properly yet: nested submodules without .gitmodules in their working
tree. This has been documented with a warning and a test_expect_failure
item in t7814, and in this case the current behavior is not altered: no
config is read.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With SHA-256, the length of the all-zeros object ID is longer. Add a
function to git-submodule.sh to check if a full hex object ID is the
all-zeros value, and use it to check the output we're parsing from git
diff-files or diff-index.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the 'submodule--helper config' command in git-submodules.sh to avoid
referring explicitly to .gitmodules by the hardcoded file path.
This makes it possible to access the submodules configuration in a more
controlled way.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule update" is getting rewritten piece-by-piece into C.
* sb/submodule-update-in-c:
submodule--helper: introduce new update-module-mode helper
submodule--helper: replace connect-gitdir-workingtree by ensure-core-worktree
builtin/submodule--helper: factor out method to update a single submodule
builtin/submodule--helper: store update_clone information in a struct
builtin/submodule--helper: factor out submodule updating
git-submodule.sh: rename unused variables
git-submodule.sh: align error reporting for update mode to use path
This reverts commit 7e25437d35, reversing
changes made to 00624d608c.
v2.19.0-rc0~165^2~1 (submodule: ensure core.worktree is set after
update, 2018-06-18) assumes an "absorbed" submodule layout, where the
submodule's Git directory is in the superproject's .git/modules/
directory and .git in the submodule worktree is a .git file pointing
there. In particular, it uses $GIT_DIR/modules/$name to find the
submodule to find out whether it already has core.worktree set, and it
uses connect_work_tree_and_git_dir if not, resulting in
fatal: could not open sub/.git for writing
The context behind that patch: v2.19.0-rc0~165^2~2 (submodule: unset
core.worktree if no working tree is present, 2018-06-12) unsets
core.worktree when running commands like "git checkout
--recurse-submodules" to switch to a branch without the submodule. If
a user then uses "git checkout --no-recurse-submodules" to switch back
to a branch with the submodule and runs "git submodule update", this
patch is needed to ensure that commands using the submodule directly
are aware of the path to the worktree.
It is late in the release cycle, so revert the whole 3-patch series.
We can try again later for 2.20.
Reported-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull --rebase -v" in a repository with a submodule barfed as
an intermediate process did not understand what "-v(erbose)" flag
meant, which has been fixed.
* sb/pull-rebase-submodule:
git-submodule.sh: accept verbose flag in cmd_update to be non-quiet
This chews off a bit of the shell part of the update command in
git-submodule.sh. When writing the C code, keep in mind that the
submodule--helper part will go away eventually and we want to have
a C function that is able to determine the submodule update strategy,
it as a nicety, make determine_submodule_update_strategy accessible
for arbitrary repositories.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e98317508c (submodule: ensure core.worktree is set after update,
2018-06-18) was overly aggressive in calling connect_work_tree_and_git_dir
as that ensures both the 'core.worktree' configuration is set as well as
setting up correct gitlink file pointing at the git directory.
We do not need to check for the gitlink in this part of the cmd_update
in git-submodule.sh, as the initial call to update-clone will have ensured
that. So we can reduce the work to only (check and potentially) set the
'core.worktree' setting.
While at it move the check from shell to C as that proves to be useful in
a follow up patch, as we do not need the 'name' in shell now.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a56771a668 (builtin/pull: respect verbosity settings in submodules,
2018-01-25), we made sure to pass on both quiet and verbose flag from
builtin/pull.c to the submodule shell script. However git-submodule doesn't
understand a verbose flag, which results in a bug when invoking
git pull --recurse-submodules -v [...]
There are a few different approaches to fix this bug:
1) rewrite 'argv_push_verbosity' or its caller in builtin/pull.c to
cap opt_verbosity at 0. Then 'argv_push_verbosity' would only add
'-q' if any.
2) Have a flag in 'argv_push_verbosity' that specifies if we allow adding
-q or -v (or both).
3) Add -v to git-submodule.sh and make it a no-op
(1) seems like a maintenance burden: What if we add code after
the submodule operations or move submodule operations higher up,
then we have altered the opt_verbosity setting further down the line
in builtin/pull.c.
(2) seems like it could work reasonably well without more regressions
(3) seems easiest to implement as well as actually is a feature with the
last-one-wins rule of passing flags to Git commands.
Reported-by: Jochen Kühner
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'mode' variable is not used in cmd_update for its original purpose,
rename it to 'dummy' as it only serves the purpose to abort quickly
documenting this knowledge.
The variable 'stage' is also not used any more in cmd_update, so remove it.
This went unnoticed as first each function used the commonly used
submodule listing, which was converted in 74703a1e4d (submodule: rewrite
`module_list` shell function in C, 2015-09-02). When cmd_update was
using its own function starting in 48308681b0 (git submodule update:
have a dedicated helper for cloning, 2016-02-29), its removal was missed.
A later patch in this series also touches the communication between
the submodule helper and git-submodule.sh, but let's have this as
a preparatory patch, as it eases the next patch, which stores the
raw data instead of the line printed for this communication.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All other error messages in cmd_update are reporting the submodule based
on its path, so let's do that for invalid update modes, too.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule" did not correctly adjust core.worktree setting that
indicates whether/where a submodule repository has its associated
working tree across various state transitions, which has been
corrected.
* sb/submodule-core-worktree:
submodule deinit: unset core.worktree
submodule: ensure core.worktree is set after update
submodule: unset core.worktree if no working tree is present
The bulk of "git submodule foreach" has been rewritten in C.
* pc/submodule-helper-foreach:
submodule: port submodule subcommand 'foreach' from shell to C
submodule foreach: document variable '$displaypath'
submodule foreach: document '$sm_path' instead of '$path'
submodule foreach: correct '$path' in nested submodules from a subdirectory
"git submodule update" attempts two different kinds of "git fetch"
against the upstream repository to grab a commit bound at the
submodule's path, but it incorrectly gave up if the first kind
(i.e. a normal fetch) failed, making the second "last resort" one
(i.e. fetching an exact commit object by object name) ineffective.
This has been corrected.
* sb/submodule-update-try-harder:
git-submodule.sh: try harder to fetch a submodule
"git submodule update" and "git submodule add" supported the
"--reference" option to borrow objects from a neighbouring local
repository like "git clone" does, but lacked the more recent
invention "--dissociate". Also "git submodule add" has been taught
to take the "--progress" option.
* cf/submodule-progress-dissociate:
submodule: add --dissociate option to add/update commands
submodule: add --progress option to add command
submodule: clean up substitutions in script
* maint-2.16:
Git 2.16.4
Git 2.15.2
Git 2.14.4
Git 2.13.7
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
is_ntfs_dotgit: match other .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
* maint-2.15:
Git 2.15.2
Git 2.14.4
Git 2.13.7
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
is_ntfs_dotgit: match other .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
* maint-2.13:
Git 2.13.7
verify_path: disallow symlinks in .gitmodules
update-index: stat updated files earlier
verify_dotfile: mention case-insensitivity in comment
verify_path: drop clever fallthrough
skip_prefix: add case-insensitive variant
is_{hfs,ntfs}_dotgitmodules: add tests
is_ntfs_dotgit: match other .git files
is_hfs_dotgit: match other .git files
is_ntfs_dotgit: use a size_t for traversing string
submodule-config: verify submodule names as paths
Submodule "names" come from the untrusted .gitmodules file,
but we blindly append them to $GIT_DIR/modules to create our
on-disk repo paths. This means you can do bad things by
putting "../" into the name (among other things).
Let's sanity-check these names to avoid building a path that
can be exploited. There are two main decisions:
1. What should the allowed syntax be?
It's tempting to reuse verify_path(), since submodule
names typically come from in-repo paths. But there are
two reasons not to:
a. It's technically more strict than what we need, as
we really care only about breaking out of the
$GIT_DIR/modules/ hierarchy. E.g., having a
submodule named "foo/.git" isn't actually
dangerous, and it's possible that somebody has
manually given such a funny name.
b. Since we'll eventually use this checking logic in
fsck to prevent downstream repositories, it should
be consistent across platforms. Because
verify_path() relies on is_dir_sep(), it wouldn't
block "foo\..\bar" on a non-Windows machine.
2. Where should we enforce it? These days most of the
.gitmodules reads go through submodule-config.c, so
I've put it there in the reading step. That should
cover all of the C code.
We also construct the name for "git submodule add"
inside the git-submodule.sh script. This is probably
not a big deal for security since the name is coming
from the user anyway, but it would be polite to remind
them if the name they pick is invalid (and we need to
expose the name-checker to the shell anyway for our
test scripts).
This patch issues a warning when reading .gitmodules
and just ignores the related config entry completely.
This will generally end up producing a sensible error,
as it works the same as a .gitmodules file which is
missing a submodule entry (so "submodule update" will
barf, but "git clone --recurse-submodules" will print
an error but not abort the clone.
There is one minor oddity, which is that we print the
warning once per malformed config key (since that's how
the config subsystem gives us the entries). So in the
new test, for example, the user would see three
warnings. That's OK, since the intent is that this case
should never come up outside of malicious repositories
(and then it might even benefit the user to see the
message multiple times).
Credit for finding this vulnerability and the proof of
concept from which the test script was adapted goes to
Etienne Stalmans.
Signed-off-by: Jeff King <peff@peff.net>
Add --dissociate option to add and update commands, both clone helper commands
that already have the --reference option --dissociate pairs with.
Signed-off-by: Casey Fitzpatrick <kcghost@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '--progress' was introduced in 72c5f88311 (clone: pass --progress
decision to recursive submodules, 2016-09-22) to fix the progress reporting
of the clone command. Also add the progress option to the 'submodule add'
command. The update command already supports the progress flag, but it
is not documented.
Signed-off-by: Casey Fitzpatrick <kcghost@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'recommend_shallow' and 'jobs' variables do not need quotes. They only hold a
single token value, and even if they were multi-token it is likely we would want
them split at IFS rather than pass a single string.
'progress' is a boolean value. Treat it like the other boolean values in the
script by using a substitution.
Signed-off-by: Casey Fitzpatrick <kcghost@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the logical continuum of fb43e31f2b (submodule: try harder to
fetch needed sha1 by direct fetching sha1, 2016-02-23) and fixes it as
some assumptions were not correct.
The commit states:
> If $sha1 was not part of the default fetch ... fail ourselves here
> assumes that the fetch_in_submodule only fails when the serverside does
> not support fetching by sha1.
There are other failures, why such a fetch may fail, such as
fatal: Couldn't find remote ref HEAD
which can happen if the remote side doesn't advertise HEAD and we do not
have a local fetch refspec.
Not advertising HEAD is allowed by the protocol spec and would happen,
if HEAD points at an unborn branch for example.
Not having a local fetch refspec can happen when submodules are fetched
shallowly, as then git-clone doesn't setup a fetch refspec.
So do try even harder for a submodule by ignoring the exit code of the
first fetch and rather relying on the following is_tip_reachable to
see if we try fetching again.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This aims to make git-submodule foreach a builtin. 'foreach' is ported to
the submodule--helper, and submodule--helper is called from
git-submodule.sh.
Helped-by: Brandon Williams <bmwill@google.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running 'git submodule foreach --recursive' from a subdirectory of
your repository, nested submodules get a bogus value for $path:
For a submodule 'sub' that contains a nested submodule 'nested',
running 'git -C dir submodule foreach echo $path' from the root of the
superproject would report path='../nested' for the nested submodule.
The first part '../' is derived from the logic computing the relative
path from $pwd to the root of the superproject. The second part is the
submodule path inside the submodule. This value is of little use and is
hard to document.
Also, in git-submodule.txt, $path is documented to be the "name of the
submodule directory relative to the superproject", but "the
superproject" is ambiguous.
To resolve both these issues, we could:
(a) Change "the superproject" to "its immediate superproject", so
$path would be "nested" instead of "../nested".
(b) Change "the superproject" to "the superproject the original
command was run from", so $path would be "sub/nested" instead of
"../nested".
(c) Change "the superproject" to "the directory the original command
was run from", so $path would be "../sub/nested" instead of
"../nested".
The behavior for (c) was attempted to be introduced in 091a6eb0fe
(submodule: drop the top-level requirement, 2013-06-16) with the intent
for $path to be relative from $pwd to the submodule worktree, but that
did not work for nested submodules, as the intermittent submodules
were not included in the path.
If we were to fix the meaning of the $path using (a), we would break
any existing submodule user that runs foreach from non-root of the
superproject as the non-nested submodule '../sub' would change its
path to 'sub'.
If we were to fix the meaning of $path using (b), then we would break
any user that uses nested submodules (even from the root directory)
as the 'nested' would become 'sub/nested'.
If we were to fix the meaning of $path using (c), then we would break
the same users as in (b) as 'nested' would become 'sub/nested' from
the root directory of the superproject.
All groups can be found in the wild. The author has no data if one group
outweighs the other by large margin, and offending each one seems equally
bad at first. However in the authors imagination it is better to go with
(a) as running from a sub directory sounds like it is carried out by a
human rather than by some automation task. With a human on the keyboard
the feedback loop is short and the changed behavior can be adapted to
quickly unlike some automation that can break silently.
Discussed-with: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
